46 Results
44 Ton, 1.2 oz., Nissei #ES400, injection molding machine, 12.2" tie bars, 17.9" platen, toggle clamp, 21.3" daylight, NC9300T, 2001
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: ES400
Year: 2001
Used Nissei ES400 (2001) Injection Molding Machine for Sale. This pre-owned Nissei plastic injection molding machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Nissei Injection Molding Machine, please feel free to contact us. ...more
60 Ton, 0.43/0.60 oz., Nissei #DCE60-2E, Electric 2-Shot Injection Molding Machine, 19.5" diameter rotary & 20.5" x 20.5" platen, 13.8" x 13.8" tie bar, 23.6" daylight, TACT Control, 2012
Arlington Machinery | Lake Zurich, IL
Category: Screw Type Injection Molding Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nissei
Model: DCE60-2E
Year: 2012
Used 60 Ton Nissei Electric 2-Shot Injection Molding Machine Model DCE60-2E, 0.43/0.60 Oz, New In 2012 Clamp Force: 60 Ton Shot Size: 0.43 (Main) x 0.60 Oz (Secondary) Rotary Platen Size: 19.5" (D) Platen Size: 20.5" x 20.5" Tie Bar Spacing: 13.77" x 13.77" Min/Max Mold Thickness: 9.44" x 16.53" Daylight: 23.6" ...more
60 Ton, 0.6 oz., Nissei #DCE60-2E, two-shot injection molding machine, 19.5" rotary platen, Tact Control, 2012
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: DCE60-2E
Year: 2012
Used Nissei DCE60-2E (2012) Injection Molding Machine for Sale. This two-shot machine is rated at 60 Ton clamp capacity with shot sizes of 0.43 oz (main) and 0.60 oz (secondary). It carries a 19.5″ diameter rotary platen, 20.5″ x 20.5″ platens, and Tact Control. Power requirement is 230V, and the ...more
JUST ADDED!
60 Ton, Nissei #NS60-9A, Hydraulic Injection Molding Machine, 13.58" x 13.58" tie bar spacing, 19.6" x 19.6" platen, TACT, Wittmann picker, 2006
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Nissei
Model: NS60
Year: 2006
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., TONNAGE 60 TIE BAR SPACING 13.58" x 13.58" PLATEN SIZE 19.6" x 19.6" CONTROL TACT INJECTION UNIT SIZE 9A.
66 Ton, 2.3 oz., Nissei #ES600, injection molding machine, 16" x 13.6" tie bars, toggle clamp, 24" daylight, NC9300T control, 2001
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: ES600
Year: 2001
Used Nissei ES600 (2001) Injection Molding Machine for Sale. This toggle clamp machine offers 66 ton clamping capacity with a 2.3 oz shot size, making it suited to small part production. Tie bar spacing measures 16″ x 13.6″, with a clamp stroke of 10.2″, minimum daylight of 6.7″ and maximum ...more
Get email updates for newly added Screw Type Injection Molding Machine
Screw Type Injection Molding Machines (also known as screw injection molding presses) are machines that use a rotating screw to inject molten plastic or rubber into molds for precise shaping. Commonly used in industries like automotive, electronics, and packaging, they are ideal for producing high-quality, complex plastic or rubber parts. These machines are essential for efficient, high-speed production and consistent molding of materials.
70 Ton, 3.8 oz., Nissei #NS60-9A, Injection Molding Machine, 2006, NS60-9A
Revelation Machinery | Chicago, IL
Category: Screw Type Injection Molding Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nissei
Model: NS60-9A
Year: 2006
Make: Nissei, Model: NS60-9A, Year: 2006, Machine Location: Illinois, Capacity: 70 Ton, Shot Size: 3.8 oz, Tie Bar Spacing: 13.58″ x 13.58″, Platen Size: 19.6″ x 19.6″, Max Daylight: 23.62″, Min /Max Mold Height: 6.7″ / 23.6″, Clamp Stroke: 16.93″, Control: NC9000G Tact ...more
89 Ton, 3.3 oz., Nissei #FNX80III-12A Hybrid, horizontal injection molding machine, 32mm screw, 2014
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX80III-12A
Year: 2014
, 2014 89 US Ton Nissei FNX80III-12A Hybrid Injection Molding machine:, Shot size: 3.3 Oz, Screw size: 32 mm, Injection speed: 250 mm/s, Tie bar spacing: 16.5" x 16.5", Platen size: 22.8" x 22.8", Max. Open daylight: 26.4", Clamp stroke: 18.5", Control: Tact, Hours: 36374, Voltage: 240, Yushin Sprue Picker HOPFive ...more
110 Ton, 3.3 oz., Nissei #TD110E-9E, injection molding machine, 25.4" x 16.1" platens, NC9300T Control, 2003
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: TD110E-9E
Year: 2003
Used Nissei TD110E-9E (2003) Injection Molding Machine for Sale. This 110 ton machine has a 3.3 oz shot size and a platen size of 25.4″ x 16.1″, with 17.72″ maximum daylight and a minimum/maximum mold height of 11.84″/27.56″. It runs an NC9300T control and requires 230 volt power. The ...more
JUST ADDED!
112 Ton, 4.9 oz., Nissei #FNX110, Electric Injection Molder, 18.1" x 18.1" tie bar spacing, 28.3" daylight, Tact control, 230 Volts, 2008
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Naperville, IL
Mfr: Nissei
Model: FNX110
Year: 2008
DRIVE TYPE Electric TONNAGE 112 SHOT SIZE OZ. 4.9 SHOT SIZE GRAMS 139 TIE BAR SPACING 18.1" x 18.1" PLATEN SIZE 25.5" x 25.5" CLAMP STROKE 20.5" DAYLIGHT 28.3" VOLTAGE 230 CONTROL Tact MIN/MAX MOLD HEIGHT 7.9" Min. INJECTION UNIT SIZE 18A SCREW DIAMETER 36mm.
JUST ADDED!
120 Ton, 1.5 oz., Nissei #NEX110III-9EG, all-electric injection molding machine, 16.5" x 16.5" tie bar spacing, 29.9" daylight, 2014
Aaron Equipment Co | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
used- nissei injection molding machine, model nex110iii-9eg. this all-electric press is rated at 120 ton clamping capacity with a 1.5 oz shot size, making it suited to small and medium precision work. tie bar spacing is 16.5" x 16.5" with platens measuring 23.9" x 23.9", a maximum daylight of 29.9" and a clamp stroke ...more
120 Ton, 1.5 oz., Nissei #NEX110III-9EG, injection molding machine, 16.5" tie bars, 23.9" platen, 13.8" clamp stroke, Tact IV, 2014
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
Used Nissei NEX110III-9EG (2014) Injection Molding Machine for Sale. This all-electric press is rated at 120 Ton clamping capacity with a 1.5 oz shot size, making it suited to small and medium precision work. Tie bar spacing is 16.5″ x 16.5″ with platens measuring 23.9″ x 23.9″, a maximum ...more
JUST ADDED!
120 Ton, 2 oz., Nissei #NEX110III-9EG, all-electric injection molding machine, 16.5" x 16.5" tie bar spacing, robot interface, 2014
Aaron Equipment Co | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
used- nissei injection molding machine, model nex110iii-9eg. this all-electric press is rated at 120 ton clamp force with a 2 oz shot size. tie bar spacing measures 16.5" x 16.5", platen size is 23.9" x 23.9", and maximum daylight is 29.9". the machine runs a tact control and is air blow and a robot interface. built ...more
120 Ton, 2 oz., Nissei #NEX110III-9EG, injection molding machine, 16.5" tie bars, 23.9" platen, 29.9" daylight, Tact control, 2014
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX110III-9EG
Year: 2014
Used Nissei NEX110III-9EG (2014) Injection Molding Machine for Sale. This all-electric press is rated at 120 Ton clamp force with a 2 oz shot size. Tie bar spacing measures 16.5″ x 16.5″, platen size is 23.9″ x 23.9″, and maximum daylight is 29.9″. The machine runs a Tact control and is ...more
123 Ton, 6.1 oz., Nissei #FNX110IIIA-18A, hybrid horizontal injection molder, 18.1" x 18.1" tie bar spacing, 28.3" daylight, Tact IV, 2014
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX110IIIA-18A
Year: 2014
, 2014 123 Ton Nissei FNX110IIIA-18A (Hybrid), Shot size: 6.1 oz, Screw size: 40 mm, Tie bar spacing: 18.1" x 18.1", Platen size: 25.5" x 25.5", Max. Open daylight: 28.3", Control: Tact IV, Machine is in good running conditions and under power., Imperial Metric Tonnage 123 T 111.584 t Shot Size 6.1 oz 172.9 g Year ...more
JUST ADDED!
154 Ton, 8.5 oz., Nissei #FNX140III, Injection Molding Machine w/Transformers, 20.1" x 20.1" tie bar spacing, 33.5" daylight, 23.6" clamp stroke, TACT-IV control, 2019
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Apopka, FL
Mfr: Nissei
Model: FNX140III
Year: 2019
TONNAGE 154 TIE BAR SPACING 20.1" x 20.1" PLATEN SIZE 28.7" x 28.7" CLAMP STROKE 23.6 EJECTOR STROKE 3.5 DAYLIGHT 33.5 VOLTAGE 230 CONTROL TACT-IV MIN/MAX MOLD HEIGHT 9.8" min mold thickness.
JUST ADDED!
154 Ton, 10.5 oz., Nissei #FNX140III-25A, Injection Molding Machine, 20.1" x 20.1" tie bar spacing, 33.5" daylight, 1-15/16" screw, TACT IV, 2023
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Coquitlam, BC
Mfr: Nissei
Model: FNX140III-25A
Year: 2023
TONNAGE 154 SHOT SIZE OZ. 10.5 TIE BAR SPACING 20.1" x 20.1" PLATEN SIZE 28.7" x 28.7" CLAMP STROKE 23.6" EJECTOR STROKE 90 DAYLIGHT 33.5" VOLTAGE 230 CONTROL TACT IV MIN/MAX MOLD HEIGHT 9.8" Min. SCREW DIAMETER 50mm.
154 Ton, 14.9 oz., Nissei #FN-3000-36A, horizontal injection molding machine, hydraulic, 56mm screw, 2009
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FN-3000-36A
Year: 2009
, New in 2009 Nissei FN-3000-36A, Hydraulic, Shot size: 14.9 Oz, Screw size: 56 mm, Tie bar spacing: 18.9" x 18.9", Platen Size: 27.5" x 27.5", Max. Open daylight: 33.5", Control: Tact, Hours: 24400, Yushin robot, Magnetic platen. Dual corepull., Imperial Metric Tonnage 154 T 139.707 t Shot Size 14.9 oz 422.4 g Year ...more
154 Ton, 14.9 oz., Nissei #FNX140-36A, hybrid horizontal injection molding machine, 56mm screw, 2011
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX140-36A
Year: 2011
, 2011 154 US Ton Nissei FNX140-36A Hybrid Injection Molding machine:, Shot size: 14.9 Oz, Screw size: 56 mm., Injection speed: 150 mm/s, Tie bar spacing: 20.1" x 20.1", Platen size: 28.7" x 28.7", Max. Open daylight: 33.5", Clamp stroke: 23.6", Control: Tact, Hours: 47506, Voltage: 240, Yushin Sprue Picker HOPFive ...more
JUST ADDED!
197 Ton, Nissei #FN4000, Injection Molding Machine, 20.9" x 20.9" tie bar spacing, 30.3" x 30.3" platen, 37.4" daylight, NC9300T control, 2002
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Elk Grove Village, IL
Mfr: Nissei
Model: FN4000
Year: 2002
TONNAGE 197 TIE BAR SPACING 20.9" x 20.9" PLATEN SIZE 30.3" x 30.3" CLAMP STROKE 27.6 EJECTOR STROKE 4.3" DAYLIGHT 37.4" CONTROL NC9300T MIN/MAX MOLD HEIGHT 9.8" Min. INJECTION UNIT SIZE 36A.
JUST ADDED!
198 Ton, 1.2 oz., Nissei #NEX180-III5E, Electric Injection Molding Machine, 20.9" x 20.9" tie bar spacing, 0.87" screw diameter, Tact control, 7,000 hours, 230 Volt, 2007
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX180-III5E
Year: 2007
Used Nissei NEX180-III5E (2007) Injection Molding Machine for Sale. This all-electric press is rated at 198 ton clamping capacity with a 1.2 oz shot size and a 22mm screw diameter. Tie bar spacing measures 20.9″ x 20.9″, and the machine runs on a Tact control with 230V power. Approximate dimensions are ...more
JUST ADDED!
198 Ton, 14.9 oz., Nissei #FNX180IIIA-36A, all-electric injection molding machine, 22" x 22" tie bar spacing, 37.4" daylight, 2016
Aaron Equipment Co | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nissei
Model: FNX180IIIA-36A
Year: 2016
used- nissei injection molding machine, model fnx180iiia-36a. this all-electric press is rated at 198 tons of clamp force with a 14.9 oz shot size, 22" x 22" tie bar spacing, and 31.5" x 31.5" platens. maximum daylight is 37.4", with a 27.6" clamp stroke and 4.3" ejector stroke, running under a tact iv control. super ...more
JUST ADDED!
200 Ton, 5.5 oz., Nissei #NEX180IV-25E, Electric Injection Molding Machine, 20.1" max. mold height, 17.7" clamp stroke, 22" x 22" tie bar spacing, 37.8" daylight, Tact IV control, 2023
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX180IV-25E
Year: 2023
Used Nissei NEX180IV-25E (2023) Injection Molding Machine for Sale. This all-electric press is rated at 200 ton clamp capacity with a 5.5 oz shot size, 22″ x 22″ tie bar spacing and 31.5″ x 31.5″ platens. Max daylight is 37.8″, minimum/maximum mold height runs 9.8″-20.1″, and ...more
200 Ton, 9.1 oz., Nissei #FN4000, 20.9" x 20.9" tie bars, 30.3" x 30.3" platen, 1-3/4" barrel, 93T Control, 2002
Arlington Machinery | Lake Zurich, IL
Category: Screw Type Injection Molding Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nissei
Model: FN4000
Year: 2002
Used 200 Ton Nissei Injection Molding Machine, Model FN4000, 9.1oz, New in 2002 Tie Bar Spacing.20.9" x 20.9"Injection Unit.36AShot Size.9.1 oz Barrel Diameter.45mm - Hardened Barrel Platen Size.30.3" x 30.3"Min Mold Height.9.8"Clamp Stroke.27.6"Max Daylight.37.4Controller: 93T Hours:59,617 Dimensions: 20' x ...more
200 Ton, 21.4 oz., Nissei #FNX180-50A, injection molding machine, 22" tie bars, 31.5" platen, 37.4" daylight, Tact control, 2009 (2 available)
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: FNX180-50A
Year: 2009
Used Nissei FNX180-50A (2009) Injection Molding Machine for Sale. This all-electric press is rated at 200 tons of clamp force with a 21.4 oz shot size. Tie bar spacing measures 22″ x 22″, with platens of 31.5″ x 31.5″, a maximum daylight of 37.4″ and a minimum mold thickness of ...more
JUST ADDED!
220 Ton, 6.79 oz., Nissei #DC200-25ASE, two-shot injection molding machine, dual 25A units, 45mm screws, Yushin ATB-150S robot, 1996
Aaron Equipment Co | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nissei
Model: DC200-25ASE
Year: 1996
used- 1996 nissei dc200-25ase 220-ton horizontal hydraulic two-shot injection molding machine. factory hydraulic rotary platen for two-color, multi-material, overmolding, and insert molding applications. it s dual 25a injection units with 45 mm screws, 6.79 oz shot capacity per barrel, 25,260 psi maximum injection ...more
JUST ADDED!
237 Ton, 23.5 oz., Nissei #FNX220III, Injection Molding Machine, 24" x 24" tie bar spacing, 41.3" daylight, 29.9" clamp stroke, TACT-IV control, 230 Volts, 2020
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Apopka, FL
Mfr: Nissei
Model: FNX220III
Year: 2020
TONNAGE 237 SHOT SIZE OZ. 23.5 SHOT SIZE GRAMS 667 TIE BAR SPACING 24.0" x 24.0" PLATEN SIZE 34.3" x 34.3" CLAMP STROKE 29.9 EJECTOR STROKE 4.7 DAYLIGHT 41.3 VOLTAGE 230 CONTROL TACT-IV MIN/MAX MOLD HEIGHT 11.4" Min. Mold Thickness.
309 Ton, 18.6 oz., Nissei #FNX280III-71A, hybrid horizontal plastic injection molder, 26" x 26" tie bar spacing, 45.3" daylight, 32.7" clamp stroke, Tact IV, 2016
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX280III-71A
Year: 2014
, 2014 309 Ton Nissei FNX280III-71A:, Hybrid Injection Molding machines, Shot size: 18.6 oz, Screw diameter: 56 mm, Tie bar spacing: 26” x 26”, Platen size: 37.6” x 37.6”, Max. daylight opening: 45.3”, Clamp stroke: 32.7”, Max. Injection pressure: 28440 PSI, Hours: 47,529, Control: ...more
309 Ton, 18.6 oz., Nissei #FNX280III-71A, hybrid horizontal injection molding machine, 26" x 26" tie bar spacing, 45.3" daylight, 32.7" clamp stroke, Tact IV, 2016
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX280III-71A
Year: 2016
, 2016 309 Ton Nissei FNX280III-71A:, Hybrid Injection Molding machines, Shot size: 18.6 oz, Screw diameter: 56 mm, Tie bar spacing: 26” x 26”, Platen size: 37.6” x 37.6”, Max. daylight opening: 45.3”, Clamp stroke: 32.7”, Max. Injection pressure: 28440 PSI, Hours: 39,018, Control: ...more
309 Ton, 18.6 oz., Nissei #FNX280III-71A, horizontal plastic injection molder, 26" x 26" tie bar, 45.3" daylight, 32.7" clamp stroke, 2024
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FNX280III-71A
Year: 2021
, ***3 machines available***, 2021 309 Ton Nissei FNX280III-71A:, Hybrid Injection Molding machines, Shot size: 18.6 oz, Screw diameter: 56 mm, Tie bar spacing: 26” x 26”, Platen size: 37.6” x 37.6”, Max. daylight opening: 45.3”, Clamp stroke: 32.7”, Max. Injection pressure: 28440 ...more
397 Ton, 26 oz., Nissei #NEX360IV-100LE, All Electric Injection Molder, 41.5" x 41.5" platens, 28.9" tie bars, 52.8" daylight, 27.2" max. mold height, Tact control, 2006
KD Machinery | Scottsdale, AZ
Category: Screw Type Injection Molding Machine
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: NEX360IV-100LE
Year: 2006
Used Nissei NEX360IV-100LE (2006) Injection Molding Machine for Sale. This all-electric press is rated at 397 ton clamping capacity with a 26 oz shot size. Platens measure 41.5″ x 41.5″ with tie bar spacing of 28.9″ x 28.9″, giving 52.8″ maximum daylight and a minimum/maximum mold height ...more
397 Ton, 26 oz., Nissei #NEX360IV-100LE, electric injection molding machine, 41.5" x 41.5" platen, 28.9" x 28.9" tie bars, 52.8" daylight, 2006
Machinery Network Inc | Encino, CA
Category: Screw Type Injection Molding Machine
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Nissei
Model: NEX360IV-100LE
Year: 2006
2006 NISSEI NEX360IV-100LE, TONNAGE. 397 T, SHOT SIZE. 26 oz, SCREW DIAMETER. 56, PLATEN DIMENSIONS. 41.5" X 41.5", TIE BAR SPACING. 28.9" X 28.9", DAYLIGHT MIN/MAX. 52.8", MIN/MAX MOLD HEIGHT. 13.8"/27.2", TACT CONTROL, ** ONLY APPROX 53,759 HOURS.
JUST ADDED!
398 Ton, 33.8 oz., Nissei #FNX360III, Injection Molding Machine, 28.9" x 28.9" tie bar spacing, 52" daylight, 38.2" clamp stroke, TACT-IV control, 2020
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Apopka, FL
Mfr: Nissei
Model: FNX360III
Year: 2020
TONNAGE 398 SHOT SIZE OZ. 33.8 SHOT SIZE GRAMS 958 TIE BAR SPACING 28.9" x 28.9" PLATEN SIZE 41.5" x 41.5" CLAMP STROKE 38.2 EJECTOR STROKE 5.9 DAYLIGHT 52.0 VOLTAGE 230 CONTROL TACT-IV MIN/MAX MOLD HEIGHT Min. Mold Thickness: 13.8".
JUST ADDED!
398 Ton, 33.8 oz., Nissei #FNX360III, Injection Molder w/Transformers, 28.9" x 28.9" tie bar spacing, 52" daylight, 38.2" clamp stroke, TACT-IV control, 2019, (2 available)
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Apopka, FL
Mfr: Nissei
Model: FNX360III
Year: 2019
TONNAGE 398 SHOT SIZE OZ. 33.8 SHOT SIZE GRAMS 958 TIE BAR SPACING 28.9" x 28.9" PLATEN SIZE 41.5" x 41.5" CLAMP STROKE 38.2 EJECTOR STROKE 5.9 DAYLIGHT 52.0 VOLTAGE 230 CONTROL TACT-IV MIN/MAX MOLD HEIGHT 13.8" Min Mold Thickness.
400 Ton, 42.9 oz., Nissei #FN7000, horizontal injection molding machine, 80mm screw, 2000
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FN7000
Year: 2000
, 2000 400 Ton Nissei FN7000 Plastic Injection molding machine:, Shot size: 42.9 Ounces., Screw size: 80 mm, Tie bar spacing: 28.9" x 28.9", Platen Size: 41.5" x 41.5", Max. Open daylight 51.97", Imperial Metric Tonnage 400 T 362.874 t Shot Size 42.9 oz 1,216.2 g Year 2000 2000.
JUST ADDED!
501 Ton, 42.6 oz., Nissei #FNX460III, Injection Molding Machine w/Transformers, 32.3" x 32.2" tie bar spacing, 55.1" daylight, 40.4" clamp stroke, TACT-IV control, 2018
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Apopka, FL
Mfr: Nissei
Model: FNX460III
Year: 2018
TONNAGE 501 SHOT SIZE OZ. 42.6 SHOT SIZE GRAMS 1207 TIE BAR SPACING 32.3" x 32.2" PLATEN SIZE 46.9" x 46.9" CLAMP STROKE 40.4 EJECTOR STROKE 6.3 DAYLIGHT 55.1 VOLTAGE 230 CONTROL TACT-IV MIN/MAX MOLD HEIGHT Min. Mold Thickness: 14.8".
501 Ton, 54 oz., Nissei FNX460III-160A, hybrid injection molder, 32.3" x 32.3" tie bar, 55.1" daylight, Tact IV, 2015
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Year: 2015
, 2015 501 Ton Nissei FNX460III-160A, Hybrid Injection Molding machines, Shot size: 54 oz, Screw diameter: 80 mm, Tie bar spacing: 32.3” x 32.3”, Platen size: 46.9” x 46.9”, Max. Open daylight: 55.1”, Control: Tact IV, 2 airblows, 2 hydraulic core pulls, Ejector confirmation, SPI Robot ...more
618 Ton, 105 oz., Nissei #FV9000, horizontal plastic injection molder, 38.2" x 38.2" tie bar spacing, 71.3" open daylight, 2004
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FV9000
Year: 2004
, 2004 618 Ton Nissei FV9000 Injection Molding Machine:, Shot size: 105 Oz., Screw diameter: 90 mm, Tie bar spacing: 38.2" x 38.2", Platen Size: 53.5" x 53.5", Max. Open daylight: 71.3", Machine is under power and in good running conditions., Imperial Metric Tonnage 618 T 560.641 t Shot Size 105 oz 2,976.7 g Year 2004 ...more
JUST ADDED!
618 Ton, 132 oz., Nissei #FVX560III-310L, injection molding machine, 3.5" screw diameter, Tact IV Control, 2017
Machinery Network Inc | Encino, CA
Category: Screw Type Injection Molding Machine
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Nissei
Model: FVX560III-310L
Year: 2017
2017 NISSEI FVX560III-310L, TONNAGE. 618 T, SHOT SIZE. 132 oz, SCREW DIAMETER. 3.5 in, PLATEN DIMENSIONS. 53.5" × 53.5", TIE BAR SPACING. 38.2" × 38.2", CLAMP STROKE. 35.4", DAYLIGHT MIN/MAX. 71.3", MIN/MAX MOLD HEIGHT. 15.7" - 35.4", Injection Configuration. Horizontal, Dimensions. Clamp: 17.6" x 6.9" x ...more
618 Ton, 132.8 oz., Nissei #FV9000-310L, horizontal injection molding machine, 100mm screw, 2000
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FV9000-310L
Year: 2000
, 2000 618 Ton Nissei FV9000-310L, Shot size: 132.8 Oz, Screw size: 100 mm, Tie bar spacing: 38.2" x 38.2", Platen size: 53.5" x 53.5", Max. Open daylight: 71.3", Hours: 31489, Machine is in good running conditions and under power., Imperial Metric Tonnage 618 T 560.641 t Shot Size 132.8 oz 3,764.8 g Year 2000 2000.
720 Ton, 131 oz., Nissei #PH660S420B, Injection Molding System, w/Yushin Robot & QC Cell, Turnkey, 55.1" x 55.1" Platen, 35.4" Stroke, 17.7"-71.3" Daylight, 55 kW, 1900
Revelation Machinery | Chicago, IL
Category: Screw Type Injection Molding Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nissei
Model: PH660S420B
Year: 1900
Make: Nissei, Model: PH660S420B, Year: 1900, Machine Location: Upon Request, Equipment Overview, A 720‑ton Nissei PH660S420B hydraulic injection molding press outfitted with a Yushin YCII‑800 traverse robot, vibratory feeder, guarding, QC station, and magnetic clamping system. The system is ...more
JUST ADDED!
720 Ton, 132 oz., Nissei #FV660-310L, injection molding machine, Tact IV Control, core pull, 2007
Machinery Network Inc | Encino, CA
Category: Screw Type Injection Molding Machine
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Nissei
Model: FV660-310L
Year: 2007
2007 NISSEI FV660-310L, TONNAGE. 720 T, SHOT SIZE. 132 oz, PLATEN DIMENSIONS. 60.6" x 60.6", TIE BAR SPACING. 43.3" x 43.3", CLAMP STROKE. 37.4", DAYLIGHT MIN/MAX. 75.2", MIN/MAX MOLD HEIGHT. 17.7" - 37.4", EJECTOR STROKE. 7.9, TACT IV CONTROL, APPROX 54,017 HOURS, CORE PULL, AIR BLOW, STAR MODEL LW1400VI-380 ROBOT ...more
720 Ton, 132 oz., Nissei #FVX660III-310L, horizontal plastic injection molder, 43.3" x 43.3" tie bar, 75.2" daylight, 2022
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FVX660III-310L
Year: 2022
, (2 units available), 2022 720 Ton Nissei FVX660III-310L, Hybrid Injection Molding machines, Shot size: 132 oz, Screw diameter: 100 mm, Tie bar spacing: 43.3" x 43.3", Platen Size: 60.6" x 60.6", Max. Open daylight: 75.2", Control: Tact IV, Hours: 780, 2 Hyd Corepulls, 2 Air blows, 4 Valve gates, SPI Robot ...more
720 Ton, 132 oz., Nissei #FVX660III-310L, hybrid injection molder, 43.3" x 43.3" tie bar spacing, 75.2" daylight, Tact IV, 2018 (2 available)
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FVX660III-310L
Year: 2018
, (2 units available), 2018 720 Ton Nissei FVX660III-310L, Hybrid Injection Molding machines, Shot size: 132 oz, Screw diameter: 100 mm, Tie bar spacing: 43.3" x 43.3", Platen Size: 60.6" x 60.6", Max. Open daylight: 75.2", Control: Tact IV, Hours: 16,800, 2 Hyd Corepulls, 2 Air blows, SPI Robot interface, Ejector ...more
1200 Ton, 201 oz., Nissei #FVX1100III-600L, horizontal injection molding machine, Tact IV Control, 2021
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FVX1100III-600L
Year: 2021
, 2021 1200 Ton Nissei FVX1100-600L Hybrid Injection molding machine:, Shot size: 201 Oz, Tie bar spacing: 55.1" x 55.1", Platen Size: 78.0" x 78.0"", Max. Open daylight: 94.9", Tact IV control., Hours: 4,000, Machine is in excellent running conditions. Like new., Dual hydraulic core pull and dual air blow circuit. ...more
JUST ADDED!
1440 Ton, 237 oz., Nissei #FV9400, Hydraulic Injection Molding Machine, 4-3/4" screw, 700L injection unit, SEPRO robot, 93T control, 460 V., 2000
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Nissei
Model: FV9400
Year: 2000
Machine location: Mexico (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., DRIVE TYPE Hydraulic TONNAGE 1440 SHOT SIZE OZ. 237 VOLTAGE 460 CONTROL 93T SCREW DIAMETER 120mm.
JUST ADDED!
Nissei #FV9000, Horizontal Injection Molding Machine, Yushin take-out robot, 32,752 run hours, 1998
Meadoworks LLC | Schaumburg, IL
Category: Screw Type Injection Molding Machine
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Nissei
Model: FV9000
Year: 1998
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located..
