36 Results
Abene, horizontal & vertical milling machine, 600 V., 3 phase, 30 amp
MachineCo | Montreal, QC
Seller: MachineCo
Location: Montreal, QC
Mfr: Abene
“This gorgeously equipped Swedish milling machine appears to have little use or wear, as it came from a Canadian federal training facility! The joystick handle on the lower left side of the knee is no longer in its protective rubber bellows. We feel the tables and slideways, bed etc. are in good condition and no ...more
Cincinnati #205-12 Cinel 60, horizontal/vertical mill, 54-1/2" x 12" table, coolant, rapid traverse
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 205-12
SERIAL. 5J2P5P-15MODEL. CINEL 60 205-12TABLE AREA (T-SLOTTED). 54-1/2" X 12"LONGITUDINAL TABLE TRAVEL. 28"CROSS TABLE TRAVEL. 12"VERTICAL TABLE TRAVEL. 16"HORIZONTAL SPINDLE SPEEDS. 25 TO 1500 RPMSPINDLE TAPER. #50 NSTABLE BACKLASH ELIMINATOR. YESCOOLANT. YESRAPID TRAVERSE. YESMAIN SPINDLE MOTOR. 7-1/2 HORSEPOWER.
Cincinnati #205-12 Cinel 60, horizontal milling machine, 12" x54-1/2" table, #50 NS, 7-1/2 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 205-12
SERIAL.31032P5U-0029, MODEL. CINEL 60, TABLE AREA (T-SLOTTED). 54-1/2" X 12", LONGITUDINAL TABLE TRAVEL. 28", CROSS TABLE TRAVEL. 12", VERTICAL TABLE TRAVEL. 16", HORIZONTAL SPINDLE SPEEDS. 25 TO 1500 RPM, SPINDLE TAPER. #50 NS, TABLE BACKLASH ELIMINATOR. YES, COOLANT. YES, RAPID TRAVERSE. YES, MAIN SPINDLE MOTOR. ...more
JUST ADDED!
Cincinnati #3, horizontal mill, 60" x 12" table, coolant, rapid traverse, 7.5 HP, #50 NS
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 3
SERIAL. #2J23P5L-7, MODEL. 3, AREA OF TABLE. 60" X 12", SPINDLE SPEEDS. (16) 35 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (16) 1/4 TO 30 IPM, VERTICAL FEEDS. (16) 1/8 TO 15 IPM, LONGITUDINAL TRAVEL. 32", CROSS TRAVEL. 10", VERTICAL KNEE TRAVEL. 14", TAPER IN SPINDLE. #50 NS, RAPID TRAVERSE. YES, COOLANT. YES ...more
Cincinnati Cinova #80-307-14, horizontal/vertical mill, 14" x62-1/2"table, #50 NS, pendant Control, coolant, 7.5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 80-307-14
SERIAL. 300861, MODEL. 80-307-14, TABLE AREA (T-SLOTTED). 62-1/2" X 14", LONGITUDINAL TABLE TRAVEL. 34", CROSS TABLE TRAVEL. 12", VERTICAL TABLE TRAVEL. 18", OVERARM SPINDLE SPEEDS. (8) 50 TO 760 RPM, MAIN SPINDLE SPEEDS. (16) 25 TO 2000 RPM, LONGITUDINAL & CROSS TABLE FEEDS. (16) 1/4 TO 30 IPM, VERTICAL TABLE ...more
Get email updates for newly added Horizontal and Vertical Milling Machine
Horizontal and Vertical Milling Machines (also known as horizontal-vertical mills) are versatile machines used for cutting, drilling, and shaping materials. The horizontal version is ideal for slot cutting, while the vertical version is best for drilling and precision milling. Common in metalworking, automotive, and aerospace, these machines are essential for producing precise components.
Cincinnati, horizontal mill wuth Bridgeport head, Cimtrol Control
iGAM | Detroit, MI
Seller: iGAM
Location: Detroit, MI
Mfr: Cincinnati
This listing is for a Cincinnati Horizontal Mill., Manufacturer Cincinnati, Type Horizontal Mill, Control System CIMTROL, Location OH, Spec Sheet, CINCINNATI _UNKNOWN_, Weight. 999.
Cincinnati Milacron #205-12 Cinova 80 plain horizontal mill, Sony Trak 2-Axis digital read out, vertical head spindle
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Cincinnati Milacron
Model: 205-12
#205-12 CINCINNATI-MILACRON "CINOVA 80" PLAIN, HORIZONTAL MILL w/INDEPENDANT OVERHEAD SPINDLE - #30581, Serial No 31422P5V-4, Model CINOVA 80, Ltr DH, Sony "Trak" 2-Axis Digital Readouts, Independant Overhead Vertical Head Spindle, Knee Motor - Extra Arbors, Coolant System (Built-In), CATALOG :, Table Dimensions ...more
DAH LIH #DL-GH2200, Vertical/Horizontal Mill, 11" x 51" Table, 1300 RPM, 440 V., 1988
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Dah Lih
Model: DL-GH2200
Year: 1988
Model GH2200, Year of Manufacture 1988, Table working size 51.2" x 11", Table travel--longitudinal 39.4", --cross 14.2", --vertical 17.7", Table feeds--number, --longitudinal & cross.6 to 27.5 ipm, Rapid traverse--longitudinal & cross 118 ipm, --vertical 31 ipm, HORIZONTAL SPINDLE:, Spindle taper #50 taper ...more
Dah Lih #GH2200, Horizontal And Vertical Milling Machine, 51.2" x11" table, 1988
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Dah Lih
Model: GH2200
Year: 1988
51.2” X 11” Horizontal and Vertical Milling Machine with Pendant Control, Horizontal Arbor Supports with Arbor, Coolant System and One Shot Lubrication, Table Working Size: 51.2" X 11", Table Travel Longitudinal: 39.4", Cross: 14.2", Vertical: 17.7", Table Feeds Number:, Longitudinal & Cross:.6 To 27.5 ...more
DoAll #FU-205, vertical/horizontal mill, 53-3/4" x 12" table, 2"-22" throat, Heidenhain 2-Axis digital read out, 5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: FU-205
SERIAL. 5825-5MODEL. FU-205AREA OF TABLE. 53-3/4" X 12"SPINDLE SPEEDS. 40 TO 1500 RPM (VARIABLE)POWER LONGITUDINAL FEED. 1/2 TO 21 IPMPOWER CROSS FEED. 1/2 TO 21 IPMLONGITUDINAL TRAVEL. 32"CROSS TRAVEL. 15-3/4"VERTICAL TRAVEL OF KNEE. 17-5/8"DEPTH OF THROAT. 2" MINIMUM / 22" MAXIMUMTAPER IN SPINDLE. #40 ERICKSON QUICK ...more
First #LC20VHS, horizontal/vertical milling machine, 10-1/4" x51-3/16" table, 3 HP, pendant Control
Cleveland Machinery Sales Inc | Cleveland, OH
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: First
Model: LC20VHS
FIRST LC20VHS, Table Size-W. 10.25", Table Size-L. 51.188", Power. 3 hp, Table Size: 10 1/4" x 51 3/16", Vertical Spindle:, Spindle Taper N.S.T. #40, Spindle RPM: Variable 60-4500, Quill Travel: 5", 3 HP, Horizontal Spindle:, Spindle Taper N.S.T. #40, Spindle RPM: 6 Gear Shifts 35-1230, Pendant Control, Separate Motor ...more
Heckert #FW-450x1800-APUG, Horizontal/Vertical Mill w/All Tooling, 18.25" x 71" Work Area, (6) 0.7" width T-Slots, 52" X, 14" Y, 24.75" Z, 20/15 HP, 2240/1400 RPM
Machinery Solutions Inc | Lexington, SC
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Heckert
Model: 450APUG
STOCK #UD100295, Machinery Solutions, Inc. is pleased to quote the following:, (1) WMW-HECKERT Model FW-450 x 1800 APUG Heavy-Duty Combination Horizontal/Vertical, Knee-Type Production Milling Machine, S/N 326295/154 (2002), Price. $ 24,500.00, Standard s & Equipment:, Horizontal 20 HP motor, 18 spindle ...more
Heckert #FU-450X1800, horizontal mill, 72" x21" table, 3-Axis digital read out, 20 HP, coolant, #71322
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Heckert
Model: FU450X1800
SERIAL. 326203/233, MODEL. FU450X1800, AREA OF TABLE. 72" X 21", TABLE SWIVELS. 45 DEGREES EACH WAY, HORIZONTAL SPINDLE SPEEDS. (18) 45 TO 2240 RPM, FEED RANGE, LONG AND CROSS. (18).63-31.5 IPM, FEED RANGE, VERTICAL. (18).20-10 IPM, LONGITUDINAL TRAVEL. 52", CROSS TRAVEL. 14", VERTICAL TRAVEL. 24-3/4", SPINDLE TAPER ...more
Kearney & Trecker #10HP-3CH, 13-1/2" x 64" table, power feed, arbor, tooling
Liberty Machine Works | Preston, ID
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Kearney & Trecker
Model: 10HP-3CH
Table 13 1/2" x 64", 50" Taper Spindle, Powerfeed, Arbor, Tooling, 220/440V 3PH, KEARNEY & TRECKER 10HP-3CH, Table Size-W. 13.5", Table Size-L. 64", Weight. 6500.
Kearney & Trecker #205SA, horizontal mill with vertical head, #12" x50" table, 5 HP, #72819
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 205SA
MODEL. 205 SA, WORKING SURFACE OF TABLE. 50" X 12", LONGITUDINAL TABLE TRAVEL. 28", CROSS TABLE TRAVEL. 10", VERTICAL TRAVEL OF KNEE. 18", SPINDLE SPEEDS. (16) 25 TO 1500 RPM, SPINDLE NOSE. NO. 50, FEEDS. (16) 1/4 TO 32 IPM, RAPID TRAVERSE RATE. 150 IPM, COOLANT. YES, MOTOR. 5 HORSEPOWER.
JUST ADDED!
Kearney & Trecker #307-S12, horizontal mill, 62-1/2" x 12" table, #50 NS, overarm support, coolant
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 307-S12
SERIAL. 32-9830, MODEL. 307-S-12, AREA OF TABLE. 62-1/2" X 12", SPINDLE SPEEDS. (24) 25 TO 2000 RPM, LONGITUDINAL AND CROSS FEEDS. (16) 1/4 TO 32 IPM, VERTICAL FEEDS. (16) 1/8 TO 16 IPM, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 18", TAPER IN SPINDLE. #50 NS, TOP OF TABLE TO CENTER OF ...more
Kearney & Trecker #315-S15, knee type, sliding head, 1 HP, 230 V., 3 phase, 60 Hz, 1972
Liberty Machine Works | Preston, ID
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Kearney & Trecker
Model: 315-S15
Year: 1972
KNEE TYPE, VERTICAL, SLIDING HEAD, 34'' TABLE TRAVEL, I HP SPINDLE DRIVE, 230 VOLTS, 3 PHASE, 60 HERTZ, A. C., Originally purchased by the Navy, 1972 KEARNEY & TRECKER 315-S15, Weight. 8000.
Kearney & Trecker #420TF-17, Vertical/Horizontal Mill, 80" x 17" Table, 1500 RPM, 15 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 420TF-17
SERIAL., MODEL. 420TF-17, MACHINE TOOLMAKERS VERTICAL HEAD ON OVERARM, TABLE AREA (T-SLOTTED). 80" X 17", LONGITUDINAL TABLE TRAVEL. 42", CROSS TABLE TRAVEL. 14", VERTICAL TABLE TRAVEL. 18", MAIN SPINDLE SPEEDS. (24) 15 TO 1500 RPM, TOOLMAKER'S OVERARM SPEEDS. (8) 50 TO 800 RPM, LONGITUDINAL & CROSS FEEDS. ...more
JUST ADDED!
Kearney & Trecker #7-1/2-HP-3CH, Milling Machine
Fram Fram LLC | Savage, MN
Seller: Fram Fram LLC
Location: Savage, MN
Mfr: Kearney & Trecker
Model: 7-1/2-HP-3CH
Make: Kearney & Trecker, Model: 7-1/2 HP-3CH, Year:, s/n: 6791.
Kent USA #JY-VH650B, VH780, Combination Horizontal & Vertical Spindle Mill, 24"/27.6" x 87"/102.4", new, #12812, 12813 (2 available)
Blumberg Machinery Co | Bannockburn, IL
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: JY-VH650B
19.7 " x 75" KENT USA JY-VH650 COMBINATION HORIZONTAL & VERTICAL SPINDLE MILL - NEWPRODUCT S, 10 HP spindle motor infinitely variable speed, #50 taper spindle, 24 x 87 hardened and ground table topSaddle and base with hardened and ground square (box) waysPrecision ACME screws in X, Y, & Z axesX, Y, & Z ...more
Milwaukee #3H, horizontal mill with vertical head & universal table, 14" x64" table, #59966
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Milwaukee
Model: 3H
SERIAL. 4-5559, MODEL. H, SIZE. #3, UNIVERSAL / SWIVEL TABLE. YES, VERTICAL HEAD. YES, TABLE SIZE. 14" X 64", SPINDLE SPEEDS. (16) 20 TO 1000 RPM, LONGITUDINAL TABLE TRAVEL. 34", CROSS TABLE TRAVEL. 12", VERTICAL TABLE TRAVEL. 17", SPINDLE TAPER. #50 NS, LONGITUDINAL & CROSS TABLE FEEDS. (16) 1/2-30 IPM, VERTICAL ...more
JUST ADDED!
Phoebus #PBM-GEVS500A, Vertical & Horizontal Milling Machine, 14-1/2" x 58" table, 36.2" X, 20.4" Y, 17.3" Z, 5 HP, 1500 & 3600 RPM, 3-axis Fagor digital read out
Trader Machinery Inc | Concord, ON
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Phoebus
Model: PBM-GEVS500A
14-1/2" X 58"36.2"20.4"17.3"#4060 - 3600 RPM - VARIABLE ELECTRIC3.3" - 19.9"65 - 1500 RPM#405 HP5 HPAC SERVO 750 W1 HP81.5" X 75" X 98" TALL6,000 LBS.
Polamco #FW41M, horizontal/vertical mill, 15-3/4" x78" table, pendant Control, 15 HP, #57501
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Polamco
Model: FW41M
SERIAL. 92/23, MODEL. FW41M, AREA OF TABLE. 78" X 15-3/4", SPINDLE SPEEDS HORIZONTAL. (21) 20 TO 1300 RPM, SPINDLE SPEEDS VERTICAL SPINDLE. (21) 37.5 TO 2360 RPM, LONGITUDINAL FEEDS. (32) 1/2 TO 42 IPM, CROSS FEEDS. (32) 3/8 TO 31-5/8 IPM, VERTICAL KNEE FEEDS. (32) 1/4 TO 20 IPM, VERTICAL RAM FEEDS. (16) 1/4 TO 80 ...more
Sharp #UH3, horizontal mill, 12" x63" table, AcuRite 3-Axis digital read out, #50NS taper, 2000, #74163
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Sharp
Model: UH3
Year: 2000
SERIAL. 2H195, MODEL. UH3, YEAR NEW. 2000, AREA OF TABLE (T-SLOTTED). 12" X 63", WORKING SURFACE. 51-3/16" X 11-13/16", SPINDLE SPEEDS. 35 TO 1382 RPM, LONGITUDINAL AND CROSS FEEDS. 1/2" TO 24-7/8 1PM, VERTICAL FEED. 1/2" TO 24-7/8 IPM, LONGITUDINAL TRAVEL. 37-3/8", CROSS TRAVEL. 14-13/16", VERTICAL TRAVEL. 18-1/2" ...more
Sharp #UH3, manual heavy duty vertical/horizontal milling machine, 11-13/16" x51-3/16" table
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: UH3
Heavy Duty UH3 Vertical/Horizontal Mill, Model: UH3, Manufacturer: SHARP, Serial # 2H125, TABLE:, WORKING SURFACE: 51 3/16 in X 11 13/16 in, TRAVEL: 37 3/8 in X 14 13/16 in X 18 1/2 in, T-SLOT (NOMINAL SIZE X NO. X PITCH) : 5/8 in X 3 in X 2 3/4 in, FEEDS, VERTICAL (12 STEPS): 1/4 – 12 7/16 IPM, FEEDS ...more
Sharp #VH-3, vertical/horizontal mill, 12" x 54" table
iGAM | Detroit, MI
Seller: iGAM
Location: Detroit, MI
Mfr: Sharp
Model: VH-3
SHARP VH-3 Vertical & Horizontal Mills for sale. s a 12" x 54" table, ACU-RITE Digital Read out. Ideal for diverse milling tasks. Well-suited for precise machining. Don't miss the chance to enhance your operations with this versatile tool., Spec Sheet, SHARP VH-3, Table Size-W. 12", Table Size-L. 54" ...more
Sharp #VH-25, Vertical/Horizontal Combo Milling Machine, 10" x 56" table, 3 axis, 5 HP, 4500 RPM, 2018
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Sharp
Model: VH-25
Year: 2018
Spec Sheet:, 2018 Sharp VH-25 Heavy Duty Vertical/Horizontal Combo Milling Machine, Table Size (W x L/In.): 10 x 56, Vertical Spindle Taper: NMTB-40, Vertical Spindle Speeds Mechanical Variable Speed, Vertical Spindle Speeds Range (RPM): 60 - 4,500, Horizontal Spindle Taper: NMTB-40, Horizontal Spindle Speeds: 6 ...more
Sharp #VH-25, Vertical/Horizontal Milling Machine, 10" x 56" Work Table, 36" L x 16.5" width Travel, 17.5" Knee & 18.5" Ram Travels, 4 & 5 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Sharp
Model: VH-25
Sharp 10″ x 56″ Vertical/Horizontal Milling Machine, VH-25, Inventory # 2241, Model: VH-25, A versatile model with “two machines in one” design, offering vertical and horizontal milling operations in one set-up. Changing over from one operation to the other is quick and simple. All it takes is ...more
Sharp #VH-25, Vert & Horiz Mill, 10" x56" table, 5 HP, 4500/1350 RPM, 2018
Aucto | San Francisco, CA
Seller: Aucto
Location: Louisville, KY
Mfr: Sharp
Model: VH-25
Year: 2018
THE 2018 SHARP VH-25 IS A HEAVY DUTY VERTICAL/HORIZONTAL COMBO MILLING MACHINE WITH A 10 BY 56 INCH TABLE. BOTH THE VERTICAL AND HORIZONTAL SPINDLES UTILIZE AN NMTB-40 TAPER AND ARE POWERED BY INDIVIDUAL 5 HP MOTORS. THE VERTICAL SPINDLE S MECHANICAL VARIABLE SPEEDS RANGING FROM 60 TO 4,500 RPM, A 3-1/2 INCH QUILL ...more
Sharp #VH25, combination vertical/horizontal palin milling machine, 10" x56" table, 5 HP, 2016
Belmont Machinery Co | Aurora, IL
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Sharp
Model: VH25
Year: 2016
Size 10"x56" Make SHARP Year 2016, ONE USED - SHARP Combination Vertical/Horizontal Plain Milling Machine, Model: VH25, Serial Number: 50402018, New 2016, 10” x 56” T-Slotted Table, Vertical Head Speeds from 60 to 4200 RPM, 40 Taper Spindle, Horizontal Spindle Speeds from 55 to 1180 RPM, 40 Taper Spindle ...more
Sharp #VH25, heavy duty vertical & horizontal mill, 10" x56" table, 5 HP, 4500 RPM
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: VH25
36” X 16-1/2” DUAL Vertical & Horizontal Machining System with 5HP Vertical 4,500 RPM Milling Head, 5HP Horizontal X40 NST Milling Drive, Full 360° Turret Swivel, 45° Head Tilt (F-B) and 90° Head Swivel (L-R) capabilities, STANDARD EQUIPMENT, Flood Coolant SystemRapid Knee ...more
South Bend #Veriner-SA, horizontal mill with vertical head, 12" x47" table, 5 HP, coolant
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: South Bend
Model: VERINER-SA
SERIAL. 12354, MODEL. VERINER SA, AREA OF TABLE. 12" X 47", SPINDLE SPEEDS. 32 TO 1500 RPM, FEEDS.12 TO 26.87 IPM, LONGITUDINAL TRAVEL. 32", CROSS TRAVEL. 12, VERTICAL TRAVEL. 16", POWER RAPID TRAVERSE. YES, TAPER IN SPINDLE. #30 NS, COOLANT. YES, OVER ARM SUPPORTS. 2, UNIVERSAL VERTICAL HEAD. YES, HORSEPOWER MAIN ...more
Supermax #YC-2GS, Horizontal And Vertical Milling Machine, 51.2" x11" table, 1981
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Supermax
Model: YC-2GS
Year: 1981
51.2” X 11” Knee Mill with Variable Speed, Spindle and Turret Head, Horizontal Arbor Supports with Arbor, Coolant System, One Shot Lubrication and Bijur #UBA2 Spray Mist Coolant Unit, Table Working Size: 51.2" X 11", Table Travel Longitudinal: 39.4", Cross: 14.2", Vertical: 17.7", Table Feeds Number: ...more
Supermax #YCM-2GS, #40 horz. spindle & turret head, automatic feed, digital read out, 1994
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Supermax
Model: YCM-2GS
Year: 1994
Select Language Abkhaz Acehnese Acholi Afar Afrikaans Albanian Alur Amharic Arabic Armenian Assamese Avar Awadhi Aymara Azerbaijani Balinese Baluchi Bambara Baoulé Bashkir Basque Batak Karo Batak Simalungun Batak Toba Belarusian Bemba Bengali Betawi Bhojpuri Bikol Bosnian Breton Bulgarian Buryat Cantonese ...more
JUST ADDED!
Supermax, Vertical & Horizontal Milling Machine, 39.4" x 14.2" x 17.7" travel, 51" x11" table
Equilibrium Machinery | Waukesha, WI
Seller: Equilibrium Machinery
Location: Waukesha, WI
Mfr: Supermax
Supermax Vertical and Horizontal Milling Machine, 51″ x 11″ Table, Table Travel Longitudinal 39.4″, Cross Travel 14.2″, Vertical 17.7″, More info to come.
Varnamo #FU-3, Horizontal & Vertical Milling Machine w/Motorized Overarm, 60" x 12" width Table
MachineCo | Montreal, QC
Seller: MachineCo
Location: Montreal, QC
Mfr: Varnamo
Model: FU-3
“This gorgeously equipped Swedish milling machine appears to have little use or wear, as it came from a Canadian federal training facility! The joystick handle on the lower left side of the knee is no longer in its protective rubber bellows. We feel the tables and slideways, bed etc. are in good condition and no ...more
