1 - 50 of 56 listings
1/4" Davis Standard Killion tubing extrusion line, 24:1 L/D, 3 zone electrically heated
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Davis Standard 1/4 tubing extrusion line including the following equipment:, A. Davis Standard / Killion model KN-100 1.00 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 39 centerline height. Gearbox is belt driven by a 3 HP D/C motor with SCR control. ...more
1.25" Davis Standard #DS-125, plastic extruder, 24:1 L/D, 15:1 G/B ratio, 5 HP DC motor, 1991
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: DS-125
Year: 1991
Item 6519 - One (1) Used 1.25" 32mm Plastic Extruder, Model DS-125, 24:1 L/D ratio, 5 HP DC Motor, Gearbox ratio 15:1, S/N L8345, Date 1991.
1.25" Davis Standard #Pedestal extruder, air cooled, 36:1 L/D vented barrel, 2001
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Model: PEDESTAL
Year: 2001
Used 1.25" Davis Standard Pedestal Extruder With 36/1 L/D Vented Barrel., New 2001. Has electrically heated air cooled barrel, includes temperature control panel and 5 hp AC motor, 230/460 volt., Previously used as co-extruder on laboratory sheet extrusion line., 2001 DAVIS STANDARD PEDESTAL.
JUST ADDED!
1.25" Davis Standard, pedestal extruder, 24:1 L/D, 5 HP DC, 3 barrel zones, air-cooled, 230/1/60, 1998
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 1998
Used 1.25" Davis Standard Pedestal Extruder, 24:1 L/D, 5 HP DC Air Cooled Barrel, 3 Barrel Zones, 1 Downstream Zone 2.5" x 2.5" Square Feed Thoat, Tilted Hopper 16.5:1 Flender CFA Type Gearbox, Rated To 9.3 HP 1.25 SF @ 100 Extruder RPM 5 HP Reliance Electric DC Motor, With 1/3 HP Blower 1750 RPM 180V, 24A Straight ...more
JUST ADDED!
1.25" Davis Standard, pedestal extruder, 24:1 L/D, 5 HP DC, 3 barrel zones, air-cooled, 230/1/60, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 1999
Used 1.25" Davis Standard Pedestal Extruder, 24:1 L/D, 5 HP DC Air Cooled Barrel, 3 Barrel Zones, 1 Downstream Zone 2.5" x 2.5" Square Feed Throat, Tilted Hopper 16.5:1 Flender CFA Type Gearbox, Rated To 9.3 HP 1.25 SF @ 100 Extruder RPM 5 HP Reliance Electric DC Motor, With 1/3 HP Blower 1750 RPM 180V, 24A Straight ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
JUST ADDED!
1.25" Davis Standard, pedestal extruder, 24:1 L/D, 5 HP AC, 3 barrel zones, air-cooled, 460/3/60, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 1999
Used 1.25" Davis Standard Pedestal Extruder, 24:1 L/D, 5 HP AC Air Cooled Barrel, 3 Barrel Zones, 1 Downstream Zone 2.5" x 2.5" Square Feed Throat, Tilted Hopper 16.5:1 Flender CFA Type Gearbox, Rated To 9.3 HP 1.25 SF @ 100 Extruder RPM Leeson Ultimate E AC Motor, Model D184T17FB81A 460/3/60, 6.5A 1755 RPM 184T ...more
1.5" Davis Standard #1.5", non vented air cooled extruder, 28:1 L/D vented barrel, 15 HP DC motor, 1989
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Model: 1.5
Year: 1989
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder., New in 1989. 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor drive., Previously used as co-extruder for laboratory sheet extrusion line., DAVIS STANDARD 1.5".
1.5" Davis Standard #150IN-DS-20, 24:1 L/D, vented barrel, elec.heated, air cooled, 1984
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Model: 150IN-DS-20
Year: 1984
Used 1.5 Davis Standard Vented Single-Screw Extruder, 24:1 L/D, Model: 150IN DS-20, Serial: J6173, Year: 1984, Barrel: vented, electrically heated, air cooled (blowers missing), 42 centerline height, Driven by a nontagged motor and a Reliance model GV3000 AC drive, Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service ...more
1.5" Davis Standard #150IN-DS-20, Single Screw Extruder, 24:1 L/D, Vented Barrel, 50 HP Gearbox, 42" centerline, 152 RPM screw, 1984
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 150IN-DS-20
Year: 1984
used- davis standard 1.5" extruder, model 150in ds-20. 24:1 l/d vented barrel at a 42" centerline. davis standard 6.53:1 gearbox rated for 50 hp with a service factor of 1.25 for a 152 rpm screw speed. gearbox was manufactured in 1998. non-tagged motor is driven by a reliance model gv3000 a/c drive. includes unitized ...more
JUST ADDED!
1.5" Davis Standard, Duplex Hose Extrusion Line, (2) cold feed rubber extruders, (2) 10 HP motors, 1775 RPM, 12:1 L/D, integrated VFD drives, central control panel, 460 Volt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6005-3 - One (1) DS Davis Standard 1.5" x 1.5" Duplex Hose Line, Cold Feed Rubber Extruders, 12:1 L/D, 17.56:1 G/B ratio, Marathon 10 HP 1775 RPM 460 VAC motor, duplex head, clamp assembly, integrated VFD and control panel, forced lube system, PFR power feed roll external bearings with adjustable ...more
2" Davis Standard #20EH, super blue sgle screw extruder, 24:1 L/D, 20 HP AC motor, 2021
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 20EH
Year: 2021
Used 2.0” Davis Standard Super Blue Single Screw Extruder 24:1 L/D Ratio, Air Cooled Barrel 3 Barrel Zones, 5 Die Zones 17.56:1 Gearbox Rated To 46 HP Clamp 20 HP 1000:1 AC Motor With 20 HP Yaskawa AC Inverter Drive DS-TPC II With 15” Touch Screen Controller New In 2021 460/3/60, 77 FLA P/N: 002178676-4-1 ...more
2" Davis Standard, extrusion line, 24:1 L/D ratio, air cooled barrel, 2020
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2020
Davis Standard Monofilament Line Line Consists Of The Following Pieces: Used 2.0” Davis Standard Super Blue Single Screw Extruder 24:1 L/D Ratio, Air Cooled Barrel 3 Barrel Zones, 5 Die Zones 17.56:1 Gearbox Rated To 35 HP Clamp 20 HP 1000:1 AC Motor With 20 HP Yaskawa AC Inverter Drive DS-TPC II With 15” ...more
JUST ADDED!
2" Davis Standard, single screw extruder, 35 HP, 100 RPM, 17.58:1 ratio, 131,400 lb. thrust, 2014
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: New Philadelphia, OH
Mfr: Davis Standard
Year: 2014
THE DAVIS-STANDARD MODEL 20, MANUFACTURED IN 2014 BY DAVIS-STANDARD, LLC, IS AN INDUSTRIAL MACHINE FEATURING A POWER CAPACITY OF 35 HP (26 KW) AND A SERVICE FACTOR OF 1.25. THIS UNIT IS DESIGNED FOR AN EXTRUDER SPEED OF 100 RPM WITH A GEAR RATIO OF 17.58. IT PROVIDES A DYNAMIC THRUST CAPACITY OF 131,400 LB (59,600 ...more
2" Davis Standard, super blue single screw extrusion line, 24:1 L/D ratio, air cooled barrel, 42" centerline, 2021
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2021
Davis Standard Monofilament Line Line Consists Of The Following Pieces: Used 2.0” Davis Standard Super Blue Single Screw Extruder, New In 2021 24:1 L/D Ratio, Air Cooled Barrel 3 Barrel Zones, 5 Die Zones 17.56:1 Gearbox Rated To 35 HP Clamp 20 HP 1000:1 AC Motor With 20 HP Yaskawa AC Inverter Drive DS-TPC II ...more
2" Davis Standard, super blue single screw extrusion line, 24:1 L/D ratio, air cooled barrel, 42" centerline, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2019
Davis Standard Monofilament Line Line Consists Of The Following Pieces: Used 2.0” Davis Standard Super Blue Single Screw Extruder, New In 2019 24:1 L/D Ratio, Air Cooled Barrel 3 Barrel Zones, 5 Die Zones 17.56:1 Gearbox Rated To 35 HP Clamp 20 HP 1000:1 AC Motor With 20 HP Yaskawa AC Inverter Drive DS-TPC II ...more
2" Davis Standard, extruder, 2" x 47.5" barrel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2" Barrel For Davis Standard Extruder Barrel Length: 47.5" OD: 4" ID: 2" Drive End Flange: 6.25" Bolt Pitch, 4 Bolt Holes Screw End Flange: M12-1.75 Thread Size, 8 Holes.
JUST ADDED!
2.5" Davis Standard #250SII, single screw extruder
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: Spring Lake, MI
Mfr: Davis Standard
Model: 250SII
2.5" Davis Standard #25IN25, cold feed rubber extruder, 20:1 L/D, 17.26:1 G/B, 40 HP, 1994
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: 25IN25
Year: 1994
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced lube system, clutch driven roller feeder assembly, PFR power feed roll, adjustable scraper blade ...more
2.5" Davis Standard #25IN25, Thermatic Single Screw Extruder, Air Cooled, (4) Barrel Zones, 25:1 L/D, 3.5" x 3.5" Feed Throat, 40 HP, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 25IN25
Year: 1985
Used 2.5" Davis Standard Thermatic, Single Screw Extruder, Model 25IN25, 24:1 L/D Air Cooled, 4 Barrel Zones 3.5" x 3.5" Feed Throat Gear Reducer, Ratio 17.26:1 Hes 301 System, Dynisco UPR800 Melt Pressure Gauge, Newport Digital Screw RPM And Motor Amp Gauges Speed POT, Start/Stop Push Buttons, Alarm/Silence, Barrel ...more
2.5" Davis Standard #DS2.5MS, extruder, 24:1 L/D, Air Cooled, 40 HP DC motor, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS2.5MS
Year: 1985
Used 2.5" Davis Standard Extruder, 24:1 L/D, Air Cooled, 40 Hp DC Motor, Belt Driven (60Hp Gearbox Capacity, With 1.25 S.F.) 3 Barrel Zones, 2 Die Zones 42" Centerline Bardac DC Drive, PowerPLX 40/99 7.42/1 Gearbox Ratio 460/3/60, 106A Watlow Temperature Controllers, Mercury Relays, Amp Meter, RPM Gauge With Clamp And ...more
JUST ADDED!
2.5" Davis Standard #SB250, Super Blue Extruder, 24:1 L/D, 40 HP, Air-Cooled, 4 Barrel Zones, SSD Drive, Belt Driven, 2006
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: SB250
Year: 2006
Used 2.5" Davis Standard Extruder, Model SB250, 24:1 L/D Ratio, Air Cooled, SSD Drive 17.26:1 Gearbox Ratio, Belt Driven, 4 Barrel Zones, 2 Die Zone 40 Hp Reliance AC Motor, Dual Speed With Hopper Previously Running PVC Digital Amp And Screw Speed Readouts, Start/Stop, Speed Pot, (4) Eurotherm Temp Controllers, (2) ...more
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, Maddox mixer
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Maddox Mixer 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
3" Davis Standard #DS-30, single screw extruder, 24:1 L/D, 7.42 gearbox ratio, air cooled, 40 HP AC, 1995
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-30
Year: 1995
Used 3" Davis Standard Single Screw Extruder, Model DS-30, New in 1995 24:1 L/D Air Cooled Barrel, 4 Barrel Zone 7.42 Gearbox Ratio, 70hp Capacity with 1.25 Service Factor 40hp Baldor Vector AC Motor, 1180-3000rpm, With AC Drive Novus Temperature Controllers, 4 Barrel Zone, 3 Die Zone Screw Speed & Motor Load ...more
3.5" Davis Standard, extruder, water cooled, 75 HP
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 350H III
Used 3.5" Davis Standard Extruder, Water Cooled, 75HP, Serial #F-8613.
3.5" Davis Standard #MV35IN35, extruder w/dual 1.25" co-extruders, 241:1 L/D, 2012
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: MV35IN35
Year: 2012
Stock#: 17744., Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012, Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/3/60 input power. 278 maximum amp load, A Davis standard model MV35IN35 3.5 24:1 L/D ...more
JUST ADDED!
3.5" Davis Standard #MVI-35IN35, extruder, 30:1 L/D, 150 HP AC, 5 barrel zones, air-cooled, Yaskawa A1000 VFD, 1998
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: MVI-35IN35
Year: 1998
Used 3.5" Davis Standard Mark VI Extruder, 30:1 L/D, 150 HP AC Motor Model: MVI-35IN35 Air Cooled Barrel, 5 Barrel Zones, 10 Die Zones 5.5" x 5" Feed Throat Centerline Height: 43" +/- 2" Screw Speed: 100 RPM 150 HP Baldor Reliance AC Motor 1755 RPM @ 60Hz 2000 RPM @ 68.5Hz 460 Volt, 160A DPG-FV Enclosure Davis ...more
3.5" Merritt/Davis Standard, single screw extruder, 5.5" x 5.5" feed throat, 24:1 L/D, air cooled barrel, 5 barrel zones, 2 die zones, 400 Amp GE circuit breaker w/ clamp & screw
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 3.5: Merritt/Davis Standard Single Screw Extruder Air Cooled Barrel, 24:1 L/D, 5 Barrel Zones, 2 Die Zones Feed Throat: 5.5" x 5.5" 26.3:1 Gear Ratio Speed: 66.5 RPM 75hp AC Motor/Drive Package Eurotherm 808 Temperature Controllers Speed POT, Start/Stop Button, Extruder AMP/RPM Digital Readouts, Dynisco Pressure ...more
4.5" Davis Standard #450S D8770, Extruder, non-vented type, 200 HP
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Davis Standard
Model: 450S D8770
Davis Standard extruder, Model 450S D8770. 4-1/2" diameter, non-vented type, driven by 200 HP main motor. Includes control panel. Previously used in plastic production applications., Diameter: 4-1/2", Basis: FOB.
4.5" Davis Standard #45IN45-34, single screw ram stuffing extruder, 400 HP, 34:1 L/D vented water cooled barrel, 42.5" centerline, 2011
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 45IN45-34
Year: 2011
Used 4.5" Davis Standard Single Screw Ram Stuffing Extruder, Model 45IN45-34, New in 2011 34:1 L/D Vented Water Cooled Barrel, 32" x 24" x 12" Water Reservoir, 1hp Water Pump, Heat Exchanger Pneumatic Ram Stuffer, Stuffer 28.5"" x 13.5" 400HP Direct Drive AC Motor, 1775 RPM, Yaskawa AC Drive Pro-Face Touchscreen ...more
4.5" Davis Standard #45T, thermatic extruder, 32:1 L/D ratio, 3-Layer 54" W sheet extrusion line, Beringer screen changer, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 45T
Year: 2019
Used 54" Wide Davis Standard 3-Layer Sheet Extrusion Line 4 1/2" Davis Standard Model 45T (450) Thermatic Extruder, 32:1 LD Ratio, Water Cooled, Control Techniques SPMD1403 Inverter Drive, 250HP Motor, S/N 002156214-1-1, 2019 Nordson Screen Changer 3 1/2" Davis Standard Model 35 Thermatic Extruder, 24:1 LD Ratio ...more
JUST ADDED!
4.5" Davis Standard, single screw extruder, 30:1 L/D, water-cooled, 250 HP AC, 6 barrel zones, Yaskawa A1000 VFD, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 1999
Used 4.5" Davis Standard Single Screw Extruder, Water Cooled, 30:1 L/D, 250 HP Water Cooled Barrel, 6 Barrel Zones, 12 Downstream Zones 9" x 5.25" Feed Throat 250 HP Baldor AC Motor 1770 RPM @ 60 Hz / 3450 RPM @ 117.5 Hz URL3203Z Frame, DPG-FV Enclosure Davis Standard Gearbox, Rated To 360 HP 17.49:1 Ratio 1.5 SF @ ...more
4.5" Merritt/Davis Standard, Single Screw Extruder, Air Cooled, 24:1 L/D Barrel, (5) Barrel & (4) Die Zones, 5" x 5" Feed Throat, 150 HP, 460 V
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 4.5" Merritt/Davis Standard Single Screw Extruder, Air Cooled, 24:1, 150 HP AC Motor 18:1 Gearbox Ratio 5 Barrel Zones, 4 Die Zones 42" Centerline Height Feed Throat: 5" x 5" 150 HP Davis-Standard/Marathon AC Motor, Model TVL 445THFN8036-000071BGI, S/N: 75642492-3-01 460/3/60, 170A, 1790 RPM, Frame 445T, TEFC ...more
4.5" Davis Standard, 30:1 L/D extruder, electrically heated, air cooled barrel, 150 HP DC, 1991
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Year: 1991
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-121, continuous style screen changer with Hyd. pump, 42" air cooled centerline barrel height and temperature ...more
5" Davis #XP-Expess, 80" W sheet line, 34:1 L/D, Maguire WSB-940T gravimetric blender, Thermatic III, 13.85:1 gearbox ratio, 2009
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: XP EXPRESS
Year: 2009
Used 80" Wide Davis Sheet Line With 5" (130MM) 34:1 Extruder, New In 2009 Maguire WSB-940T Gravimetric Blender 5 Inch (130 mm), 34:1 L/D, Thermatic III, 13.85:1 Gearbox Ratio, Model 130MM45T, Water Cooled, 8 Barrel Zones, Vented Barrel, 300 HP (222 KW) AC Drive System, Yaskawa Drive With Line Choke, S.O. 36917 ...more
5.11" Davis Standard, 30:1 L/D non-vented extruder, SCR Control, 6" continuous screen changer, 2000
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Year: 2000
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continuous screen changer with Hyd pump. Gearbox is Serial #14844, SO #70693, rated at 365 hp with 1.5" service ...more
5.11" Davis Standard, 30:1 L/D non-vented extruder, SCR Control, 6" continuous screen changer, 1997
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Year: 1997
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continuous screen changer but without Hyd pump. Gearbox is Serial #U7644, SO #58491, rated at 365 hp with 1.5" ...more
6" Davis Standard #600S-Thermatic, extruder, 30:1 L/D, 300 HP Westinghouse AC motor, 17.21:1 gearbox ratio, refurbished 2025
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 600S-THERMATIC
6" Davis Standard Extruder, 30:1 L/D, 300 HP AC Motor 30:1 L/D Ratio 17.21:1 Gearbox Ratio, PE/PP Screw Model 600S Thermatic Refurbished 10 Zone Control Panel, 6 Barrel Zones, 4 Downstream Zones, New Eurotherm 3216 Temperature Controllers New 300 HP Westinghouse AC Motor New WEG AC Inverter Drive All Bearings Inside ...more
6" Davis Standard #Thermatic-60IN60, single screw extruder, water cooled, 42" centerline, 24:1 L/D, 400 HP Teco AC motor, 2004
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60
Year: 2004
Reconditioned 6" Davis Standard Single Screw Extruder, Model Thermatic 60IN60, 24:1 L/D, 400hp, New in 2004 Water Cooled Barrel, Water Reservoir with Recirculation Pump and Heat Exchanger 17.21 Gearbox Ratio, 424 hp Capacity with 1.5 Service Factor NEW 400hp Teco AC Motor, EPS4004, 1800RPM, 449TX Frame New TECO AC ...more
6" Davis Standard #60IN60TPIH, extruder, 30:1 L/D ratio, flanged end, #19118A
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60TPIH
Year: 1990
Used 6" Barrel For Davis Extruder 30:1 L/D Ratio Non-Vented 9.55" OD 176" Long Flanged End.
6" Davis Standard #60IN60TPIH, extruder, 30:1 L/D, 500 HP Reliance AC motor, 13.41:1 gearbox ratio, refurbished 2025
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60TPIH
6" Davis Standard Extruder, 30:1 L/D, 500 HP AC Motor Vented Barrel, 30:1 L/D Ratio 13.41:1 Gearbox Ratio, Rebuilt PE/PP Two Stage Screw Model 60IN60TPIH Refurbished 12 Zone Control Panel, 8 Barrel Zones, 4 Downstream Zones, New Eurotherm 3216 Temperature Controllers New 500 HP Reliance AC Motor New AC Inverter Drive ...more
6" Davis Standard #60IN60TPIH, single screw extruder, 400 HP, 34:1 L/D, 42" centerline, 1994
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60TPIH
Year: 1994
Used 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, New in 1994 6" Davis Standard Single Screw Extruder, 34:1 L/D Water Cooled, 6 Cooling Zones Vented Barrel (Plugged) Vent Located 130" From Center of Feed Throat Cooling System Consists of 1/2hp Recirculation Pump, Heat Exchanger, 32" x 24" x 12" Water ...more
6" Davis Standard/Xalloy #60IN60TPTH, pelletizing line, 2011
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: 60IN60TPTH
Year: 2011
6" Davis Standard, cold feed rubber extruder, 20:1 L/D, 300 HP, serial #05329,1999
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Year: 1999
One (1) Used Davis Standard 6" 150mm Cold Feed Rubber Extruder, 20:1 L/D, gearbox rated at 300 HP, gear driven PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, belt drive, no motor, S/N 05329, Date 1999.
6" Davis Standard, cold feed silicone extruder, 12:1 L/D, 75 HP, 1750 RPM, 500 VDC, power feed roll
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6116 - One (1) Used Davis Standard 6" (150mm) Cold Feed Silicone Extruder, 12:1 L/D, 75 HP, 1750 RPM, 500 VDC motor, power feed roll, straight delivery head, belt drive.
6.5" Davis Standard #165MM60TPIH, single screw extruder, 42:1 L/D vented barrel, 500 HP Reliance DC motor, 1989
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 165MM60TPIH
Year: 1989
Used 6.5" Davis Standard Single Screw Extruder, Model 165MM60TPIH 42:1 L/D Air Cooled Vented Barrel, Vent Location 191", Total Barrel 273" 500Hp Reliance DC Motor, 1150RPM, ABB Drive Model DCS Temperature Control Panel with 9 Red Lion Temp Controllers, 645HP Gearbox Capacity with 1.5 Service Factor, 13.4 Gearbox Ratio ...more
9" Davis Standard #80IN80HT, single screw extruder, 32:1 L/D ratio, water cooled, 44" centerline, w/ gearbox, cooling, continuous screen changer, 2001
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 80IN80HT
Year: 2001
used- davis standard 9" extruder, model 80in80ht. 32:1 l/d ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 gearbox reduction ratio; gearbox rated at 1080 hp at a service factor of 1.5; gearbox is direct driven in a wrap-around manner by a 900 hp reliance ...more
10" Davis Standard #100TH100D, single screw extruder, 38:1 L/D ratio, water cooled, 44" centerline, w/ direct dr gearbox, cooling, Trendelkamp screen changer, 1991
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 100TH100D
Year: 1991
used- davis standard 10" extruder, model 100th100d. 38:1 l/d ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 gearbox reduction ratio; rated at 1800 hp at a service factor of 1.5; gearbox currently set to be dual direct driven in back of the gearbox. last ...more
JUST ADDED!
60" Davis Standard, Co-Ex Sheet Line, 4.5" Extruder 30:1 L/D 300 HP, 3" Co-Extruder, 58" Die, 60" Roll Stack, Shear, Sheet Saws, AB PLC, 2001
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2001
60” Wide Davis Standard Co-Ex Sheet Line Lines Consists Of The Following Pieces: 4.5” Davis Standard Single Screw Extruder, 30:1 L/D, Model Thermatic III, Vented Barrel With 7.5 HP Nash Vacuum Pump, Air-Cooled Barrel, 6 Barrel Zones, 10 Die Zones, 45IN45HT Gearbox Rated To 360 HP, 17.49:1 Gearbox Ratio ...more
