42 Results
10" x 36" Cincinnati #Hydrashift, Engine Lathe, 7" swing over cross slide, 3 HP, 1200 RPM, w/ tooling
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Cincinnati
Model: HYDRASHIFT
THE CINCINNATI HYDRASHIFT ENGINE LATHE IS SPECIFIED AS A 10" X 36" TOOLROOM PRECISION MODEL. IT S A 10-INCH SWING AND A 7-INCH SWING OVER THE CROSS SLIDE, WITH A 36-INCH DISTANCE BETWEEN CENTERS. THE SPINDLE IS POWERED BY A 3 HP MAIN DRIVE MOTOR OPERATING ON 230V/460V 3 PHASE ELECTRICITY. THE LATHE PROVIDES ...more
11" x 18" Hardinge #HLV-H, Wide Bed Tool Room Lathe, 5.75" swing over cross slide, 1.5 HP, 3000 RPM (2 available)
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Hardinge
Model: HLV-H
THE HARDINGE HLV-H WIDE BED TOOL ROOM LATHE OFFERS AN 11-INCH MAXIMUM SWING OVER THE BED, A 9-INCH MAXIMUM SWING OVER THE CARRIAGE, AND A 5.75-INCH MAXIMUM SWING OVER THE CROSS SLIDE. IT S A 3-INCH COMPOUND SLIDE TRAVEL AND A DISTANCE BETWEEN CENTERS OF 18 INCHES (TAILSTOCK FLUSH) OR 20 INCHES (TAILSTOCK OVERHUNG). ...more
11" x 18" Hardinge #HLV-H, Wide Bed Tool Room Lathe, 125-3000 RPM, digital read out, 5.75" swing over cross slide, tailstock
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Hardinge
Model: HLV-H
THIS IS A HARDINGE HLV-H WIDE BED TOOLROOM LATHE. IT S AN 11-INCH MAXIMUM SWING OVER THE BED, A 9-INCH MAXIMUM SWING OVER THE CARRIAGE, AND A 5.75-INCH MAXIMUM SWING OVER THE CROSS SLIDE. THE DISTANCE BETWEEN CENTERS IS 18 INCHES WITH THE TAILSTOCK FLUSH AND 20 INCHES WITH THE TAILSTOCK OVERHUNG. THE LATHE HAS A ...more
11" x 18" Hardinge #HLV-H-EM, Tool Room Lathe, 3000 RPM, variable speed, 1-1/4" bore, 6" swing over cross slide, inch/metric thread, 10" x 70" bed, 6" chuck
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Hardinge
Model: HLV-H-EM
THE 11” X 18” HARDINGE HLV-H-EM TOOL ROOM LATHE S A BALL-BEARING SPINDLE CONSTRUCTION WITH A HARDINGE THREADED NOSE. THE MACHINE OFFERS AN 11-INCH SWING OVER THE BED AND 18 INCHES BETWEEN CENTERS. SPINDLE CAPACITY IS 1-1/16 INCHES WITH ROUND TYPE 5C COLLETS, EXPANDING TO 6 INCHES WITH STEP CHUCKS AND 5 ...more
11" x 18" Hardinge #TFB-H, Precision Toolroom Lathe, 6" swing over cross slide, 1.5 HP, 125-3000 RPM, tailstock, 1.25" bore, tooling
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Hardinge
Model: TFB-H
THE HARDINGE SUPER PRECISION TOOLROOM LATHE, MODEL TFB-H (OR TBF-H), S AN 11-INCH SWING OVER THE BED, A 9-INCH SWING OVER THE CARRIAGE, AND A 6-INCH SWING OVER THE CROSS SLIDE, WITH AN 18-INCH DISTANCE BETWEEN CENTERS. IT IS POWERED BY A 1.5 HP, 220V, 3-PHASE, 60 HZ SPINDLE MOTOR, OFFERING A SPEED RANGE OF 125 TO ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
11" x 18", Hardinge #HLV-H-EM, Tool Room Lathe, 125-3000 RPM, inch/metric thread, 6" swing over cross slide, tailstock
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Model: HLV-H-EM
THIS HARDINGE HLV-H-EM TOOL ROOM LATHE S AN 11-INCH SWING OVER THE BED AND 18 INCHES BETWEEN CENTERS. THE SPINDLE, CONSTRUCTED WITH HARDINGE BALL BEARINGS, HAS A HARDINGE TAPERED NOSE. SPINDLE CAPACITY IS 1-1/16 INCHES WITH ROUND TYPE 5C COLLETS, 1-1/16 INCHES TO 6 INCHES WITH STEP CHUCKS, 5 INCHES WITH JAW CHUCKS ...more
13" x 40" Bridgeport Romi #13-5, Lathe, 1-3/8" bore, 5 HP, 2500 RPM, inch/metric thread, Morse tailstock, tooling
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Romi
Model: 13-5
THE BRIDGEPORT ROMI 13-5 LATHE IS A ROBUST MACHINE DESIGNED FOR PRECISION TURNING APPLICATIONS. KEY INCLUDE A 13-INCH SWING OVER THE WAYS AND A 40-INCH DISTANCE BETWEEN CENTERS. THE SPINDLE S A 1-3/8-INCH BORE AND IS DRIVEN BY A 5 HP MOTOR, SUPPORTING 12 SPINDLE SPEEDS RANGING FROM 50 TO 2500 RPM. THREADING ...more
14" x 40" Cadillac #CM1440, Engine Lathe, 8-1/4" swing over cross slide, 3 HP, 1-17/32" Bore, 1800 RPM, inch threading
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Cadillac
Model: CM1440
THIS CADILLAC CM1440 ENGINE LATHE IS SPECIFIED AS A 14″ X 40″ MACHINE WITH A 14" SWING OVER THE BED AND A 39-1/2" DISTANCE BETWEEN CENTERS. THE SWING OVER THE CROSS SLIDE IS 8-1/4". POWER IS SUPPLIED BY A 3 HP MAIN MOTOR OPERATING AT 1800 RPM, CONFIGURED FOR 220/440 VOLTS, 3 PHASE POWER. THE ...more
14" x 40" Cadillac #CM1440, engine lathe, 1-17/32"spdl bore, 5C collet closer, foot brake
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Cadillac
Model: CM1440
Spec Sheet:, 14 x 40 Cadillac Engine Lathe Manufacturer:, Cadillac Model Number: CM1440, Serial Number: 059777, Size: 14 x 40, 5C Collet Closer, Foot brake, Coolant pump, Chip pan, Swing over bed 14", Swing over cross slide 8-1/4", Distance between centers 39-1/2", Spindle bore 1-17/32", Taper of spindle bore MT No. ...more
JUST ADDED!
15" x 32" LeBlond Makino #Regal 11C, Engine Lathe, 2.25" Bore, 1200 RPM, 10" 6-Jaw Chuck
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL 11C
THE LEBLOND MAKINO REGAL 11C IS A SERVO SHIFT ENGINE LATHE FEATURING A 15 INCH SWING AND 32 INCHES BETWEEN CENTERS. IT IS A 2.25 INCH SPINDLE BORE AND A 7.5 HP MOTOR, PROVIDING A SPINDLE SPEED RANGE OF 30 TO 1,200 RPM. THE UNIT INCLUDES A 10 INCH SWING OVER THE CROSS SLIDE AND IS CAPABLE OF BOTH INCH AND METRIC ...more
15" x 54" LeBlond #15-Regal, engine lathe, 2.2656" bore, L0 nose, #3MT
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 15-REGAL
, LeBlond 15" x 54" Regal Engine Lathe available for sale. s a 15" swing, 54" centers, 2.2656" spindle bore, and 7.5 HP power with Taper attachment. Handles 45 RPM with a 9.5" swing over cross slide. Ideal for precision machining tasks., Spec Sheet:, Key :, Swing Over Bed: 15" (rated), 15.5" (actual), Swing Over Cross ...more
15" x 54" LeBlond Makino #Regal-11C, servo shift engine lathe, 10" 4-jaw chuck, 2-1/4" bore, D6 Camlock, inch/metric, 7.5 HP, 1200 RPM
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-11C
Spec Sheet:, Key (LeBlond Regal 11C), Swing Over Bed: 15-1/2 inches, Swing Over Cross Slide: 10 inches, Distance Between Centers: 54 inches, Spindle Bore: 2-1/4 inches, Spindle Nose: D6 Camlock, Spindle Speed Range: Typically 301,200 RPM or 301,800 RPM, Spindle Motor: 7.5 HP (some models 5 HP), Thread/Feed: Inch and ...more
15" x 54" LeBlond Makino #Regal-12C, servo shift engine lathe, 10" 6-jaw chuck, 2.375" bore, D1-6 Camlock, #4MT, inch/metric, 7.5 HP, 1200 RPM, steady & follow
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-12C
Spec Sheet:, 15" x 54" Leblond Makino Servo Shift Toolroom Lathe, s/n 12C-157, Swing Over Bed: 15.5 inches, Swing Over Cross Slide:10 inches, Distance Between Centers: 54 inches, Spindle Bore: 2.375 inches, Spindle Speeds: 14 speeds, 45 1800 RPM, Spindle Motor: 7.5 HP, Spindle Nose: L1 Mount, Feeds & Threads: ...more
15" x 54" Leblond Makino #Regal-12C, servo-shift toolroom lathe, 8" 3-jaw chuck, 2.375" bore, D1-6 Camlock, inch/metric, taper attachment, Steady Rest, quick change toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-12C
Spec Sheet:, 15" x 54" Leblond Makino Servo Shift Toolroom Lathe, s/n 12C-658, Swing Over Bed: 15.5 inches, Swing Over Cross Slide:10 inches, Distance Between Centers: 54 inches (1370 mm), Spindle Bore: 2.375 inches, Spindle Speeds: 14 speeds, 45 1800 RPM, Spindle Motor: 7.5 HP, Spindle Nose: D1-6 Camlock, Feeds & ...more
15" x 72" Leblond #15-Regal, Engine Lathe, 2-1/4" bore, 7.5 HP, 1200 RPM
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 15-REGAL
THIS IS A LEBLOND 15 REGAL ENGINE LATHE WITH A TAPER ATTACHMENT, FEATURING A 15" X 72" CAPACITY. IT OFFERS A SWING OVER THE BED OF APPROXIMATELY 15.5 INCHES AND A DISTANCE BETWEEN CENTERS OF APPROXIMATELY 72 INCHES. THE SPINDLE BORE MEASURES APPROXIMATELY 2.125" TO 2.2656" (2-1/8" TO ...more
15" x 72" LeBlond #Regal-15, servo shift engine lathe, 2.2656" bore, #3MT, taper
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-15
Spec Sheet:, 15" x 72" LeBlond Regal 15 Engine Lathe w/Taper, Taper Attachment, Swing Over Bed: ~15.5 inches, Distance Between Centers: ~72 inches, Spindle Bore: ~2.125" - 2.2656" (approx. 2-1/8" to 2-1/4"), Spindle Speeds: 12 speeds, often 45 - 1200 RPM, Spindle Motor:7.5 HP, Feed Rates: Numerous (e.g., 48), range ...more
15.2" x 56" South Bend #CL150E Nordic-15, Engine Lathe, 7.5 HP, 2000 RPM, 2-1/32" bore, inch/metric threading, 8-3/4" swing over cross slide, taper, Steady Rest
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: South Bend
Model: CL150E
THE SOUTH BEND MODEL CL150E "NORDIC 15" IS A GEARED HEAD ENGINE LATHE POWERED BY A 7.5 HP MOTOR. IT S A 15.25" SWING OVER THE BED WAYS AND A 56" DISTANCE BETWEEN CENTERS. THE LATHE IS A #D1-6" CAM-LOCK SPINDLE NOSE, OFFERING A 2-1/32" HOLE THROUGH THE SPINDLE. THE HARDENED AND GROUND ...more
15.5" x 54" Leblond Makino #Regal-14C-Servo-Shift, Engine Lathe, 10" swing over cross slide, 7.5 HP, 1800 RPM, inch/metric thread, 2.375" bore, collet, tailstock
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-14C-SERVO-SHIFT
THE LEBLOND MAKINO MODEL 14C REGAL SERVO SHIFT ENGINE LATHE S A 15.5-INCH SWING OVER BED AND A 10-INCH SWING OVER CROSS SLIDE, WITH A DISTANCE BETWEEN CENTERS OF 54 INCHES (1370 MM). IT IS A 7.5 HP SPINDLE MOTOR AND A D6 CAMLOCK SPINDLE NOSE. THE LATHE OFFERS 14 SPINDLE SPEEDS RANGING FROM 45 TO 1800 RPM. KEY ...more
JUST ADDED!
16" x 60" Bridgeport Romi #16-8, engine lathe, 12" 6-jaw chuck, 2.25" hole, D1-6, 22.4-1800 RPM, #4MT
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Romi
Model: 16-8
, Bridgeport Romi 16" x 60" Engine Lathe, model 16-8, offers 16.5" swing, 60" centers, and 2.25" spindle bore. s 1,800 RPM, 7.5 hp, and quick-change toolpost, threading capability, steady rest, and more. Ideal for precise machining tasks., Spec Sheet:, Bridgeport Romi 16-8 Engine Lathe Swing 16 1/2", Distance Between ...more
16-1/2" x 80" Bridgeport Romi #16-8, Engine Lathe, 9-5/8" swing over cross slide, 1800 RPM, 2-1/4" bore, quickchange toolpost, threading
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Romi
Model: 16-8
THE BRIDGEPORT ROMI 16-8 ENGINE LATHE S A 16.5-INCH SWING AND AN 80-INCH DISTANCE BETWEEN CENTERS. IT HAS A SWING OVER THE CROSS SLIDE OF 9 5/8 INCHES AND A 2 1/4-INCH HOLE THROUGH THE SPINDLE. THE WIDTH OF THE BED MEASURES 13 3/8 INCHES, AND IT USES A D1-6-INCH SPINDLE NOSE. THE MACHINE OPERATES WITH A SPINDLE SPEED ...more
16.5" x 102" Leblond, Heavy-Duty Engine Lathe, 9.75" swing over cross slide, 1.34" bore, Taper, 1250 RPM
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
THE LEBLOND SERIES "14 HEAVY-DUTY" ENGINE LATHE OFFERS A 16.5-INCH ACTUAL SWING OVER THE BED WAYS AND A 9.75-INCH SWING OVER THE CROSS SLIDE, WITH A 102-INCH DISTANCE BETWEEN CENTERS. THE SPINDLE S A 1.34-INCH BORE AND PROVIDES 24 SPEEDS RANGING FROM 25 TO 1250 RPM. THIS MODEL IS A TAPER ATTACHMENT, A ...more
17" x 48" DoALL/Romi #17, toolroom engine lathe, 12" 3-jaw chuck, 3-1/8" hole thru spindle, D1-8 Camlock spindle, Accu-Rite 2-Axis digital read out, inch/metric
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Model: 17
, The DoALL/Romi 17 is ly described as a rigid, powerful lathe designed for toolroom accuracy while acting as a production workhorse., Spec Sheet:, DoALL Engine Lathe, Model 17, 17" Swing, 48" Between Centers, 9.625" Swing Over Cross-Slide, D1-8" Camlock Spindle Nose, 3-1/8" Hole Thru Spindle, 10 HP Motor, 40 - 2120 ...more
17" x 54" Monarch #612, Engine Lathe, 16" swing over cross slide, 10 Hp, 14-1750 Rpm, 2" bore, inch threading
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Monarch
Model: 612
THE MONARCH 612 IS A HEAVY-DUTY ENGINE LATHE FEATURING A 17-INCH SWING AND 54 INCHES BETWEEN CENTERS, WITH A 16-INCH SWING OVER THE CROSS SLIDE. IT IS POWERED BY A 10 HP MOTOR REQUIRING 240V 3 PHASE ELECTRICAL SUPPLY. THE MACHINE PROVIDES 18 SPINDLE SPEEDS, WITH A LOW RANGE OF 14 TO 146 RPM AND A HIGH RANGE OF 169 TO ...more
17" x 54" Monarch #612, engine lathe, 12" 4-jaw chuck, 2" bore, D1-6, taper attachment, Aloris quick change toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: 612
, Explore precise and durable machining with the 1960 Monarch 612 Engine Lathe. Featuring 20" swing, 78" centers, 2.0625" spindle bore, and 30 hp motor. 18 spindle speeds, Aloris toolpost, coolant system, and threading capabilities., Spec Sheet:, 17" x 54" Monarch 612 Engine Lathe w/Taper, 17" Swing, 54" Between ...more
19" x 54" Leblond #19-Regal-Servo-Shift, Engine Lathe, 13" swing over cross slide, 7.5 HP, 1600 RPM, tailstock, w/ Taper Attachment
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL-SERVO-SHIFT
THE LEBLOND 19" X 54" REGAL SERVO SHIFT LATHE IS AN ENGINE LATHE FEATURING A SWING OVER BED OF APPROXIMATELY 19" TO 20" AND A DISTANCE BETWEEN CENTERS OF 54". THE SWING OVER THE CROSS SLIDE IS APPROXIMATELY 13". IT IS POWERED BY A 7.5 HP MOTOR AND INCLUDES A SPINDLE WITH A BORE RANGING ...more
19" x 78" LeBlond #19-Regal, engine lathe, 12.25" swing over cross slide, Bison 3-jaw chuck, 1.5" bore, 5 HP, 38-1500 RPM RPM, taper, tailstock, Steady Rest
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 4E-816, MODEL : REGAL, SWING OVER WAYS : 19-1/2", SWING OVER CROSS SLIDE : 12-1/4", DISTANCE BETWEEN CENTERS: 78", SPINDLE SPEEDS: (12) 38 TO 1500 RPM, FEEDS : (48).002 TO.116 IPR, THREADS: (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE : 1-49/64", TAPER ...more
19" x 78" LeBlond #Regal, engine lathe, 38-1500 RPM, 5C collet closer, Bison 3-jaw chuck, 1-49/64" hole
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
, 19" X 78" LEBLOND REGAL engine lathe with 3-jaw chuck & 5C closer. s: 19.5" swing, 78" centers, 38-1500 RPM spindle speeds, 10 HP motor, thread dial, chip pan, and tailstock. Ideal for precision machining tasks. Serial: 2D1199. Used condition., Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 2D1199 ...more
19" x 78" Leblond #Regal, Engine Lathe, 10HP, 38-1500 RPM, 1-49/64" bore,
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
THIS LEBLOND REGAL IS A 19" X 78" ENGINE LATHE. ITS TECHNICAL CAPABILITIES INCLUDE A 19-1/2" SWING OVER WAYS AND A 12-1/4" SWING OVER THE CROSS SLIDE, WITH A GENEROUS 78" DISTANCE BETWEEN CENTERS. THE MACHINE IS A 10 HORSEPOWER MOTOR. THE SPINDLE OFFERS TWELVE SPEEDS RANGING FROM 38 TO 1500 ...more
19" x 82" LeBlond Makino #Regal-19, servo shift engine lathe, 12" SOCS, 12" 3-jaw chuck, 3" spindle bore, Newall digital read out, inch/metric, Newall digital read out, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-19
Spec Sheet:, 19" x 82" LeBlond Makino Engine Lathe, Servo Shift, 3" Spindle Bore, Newall DRO, Inch & Metric Threading, 12" 3 Jaw Chuck, Tailstock, 20" Swing, 82" Between Centers, 12" Over the Cross Slide, 230V 3 Phase Power.
19" x 102" LeBlond #19-Regal, engine lathe, 10" 3-jaw chuck, 2.75" bore, 10 HP, 1500 RPM, 3 Steady Rest, follow rests, quick chane toolpost w/ holders, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
, Used 19" x 102" LeBlond Regal Engine Lathe with 2 steady and follow rests, 10 hp motor, and 2.75" spindle bore. Includes a quick-change toolpost with holders, tailstock, and more. Ideal for precision machining tasks., Spec Sheet:, 19" x 102" LeBlond Regal Engine Lathe, SERIAL: 8E2304, MODEL: 19" REGAL, SWING OVER ...more
19" x 102" Leblond #19-Regal, Engine Lathe, 12-1/4" swing over cross slide, 10 HP, 1000 RPM, 3 Jaw 10" chuck Follow Rest, Steady Rest, holders & tooling, tailstock
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
THIS LEBLOND 19" REGAL ENGINE LATHE S A 19-INCH SWING OVER WAYS AND A 13-INCH SWING OVER THE CROSS SLIDE, WITH A DISTANCE BETWEEN CENTERS OF 102 INCHES. IT IS A 10 HORSEPOWER MOTOR AND OPERATES ON 460V, 3 PHASE POWER. THE SPINDLE SPEEDS RANGE FROM 25 TO 1000 RPM, AND THE SPINDLE HOLE DIAMETER IS 2 3/4 INCHES. IT ...more
20" x 54" LeBlond #19-Regal, servo-shift eng" e lathe, 12" 3-jaw Bison chuck, 3" bore, 40-1600 RPM, 7.5 HP, taper attachment, tailstock, Dorian toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
, LEBLOND 19" x 54" Regal Servo Shift Lathe, used, s a 19" swing, 54" centers, 1.5" spindle bore, 5 hp, and 1500 RPM. Includes taper attachment, tailstock, Dorian toolpost, and 12" 3-jaw Bison chuck. Ideal for precise machining tasks., Spec Sheet:, 20" x 54" LeBlond Regal Servo Shift Engine Lathe w/Taper, Swing Over ...more
20" x 54" Monarch #610, Engine Lathe, 16" swing over cross slide, 10 Hp, 1500 Rpm, 2-1/4" bore, 12" chuck, 1978
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Monarch
Model: 610
Year: 1978
THIS MONARCH MODEL 610 IS AN ENGINE LATHE WITH A CAPACITY DEFINED BY A 20-INCH SWING AND 54-INCH DISTANCE BETWEEN CENTERS. THE MACHINE IS DRIVEN BY A 10 HP, 240V, 3-PHASE MOTOR, ALLOWING FOR A MAXIMUM ROTATIONAL SPEED OF 1,500 RPM. ITS SPINDLE S A 2.25-INCH BORE AND A D1-6 MOUNT, WHICH IS FITTED WITH A 12-INCH 3-JAW ...more
20" x 54" Monarch #610, engine lathe, 12" 3-jaw chuck, D1-6, 2.25" bore, quick change toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: 610
, Used 20" x 54" Monarch Model 610 Engine Lathe, perfect for precision machining tasks. s include 20" swing, 54" centers, and 2.25" spindle bore. a 12" 3-jaw chuck and quick-change toolpost, powered by 10 HP for efficient performance., Spec Sheet:, 20" x 54" Monarch Model 610 Engine Lathe, Model 610, S/n 47050, 12" 3 ...more
20.5" x 54" Monarch #60, engine lathe, 10" chk, 6-jaw, 1-5/8" spindle bore, quick change tool post, Steady Rest
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: 60
, Used 20.5" x 54" Monarch Model 60 Engine Lathe available. s include a 16" swing, 57" centers, and 1.5" spindle bore, with a quick change tool post and steady rest. Ideal for precision machining tasks., Spec Sheet:, 20.5" x 54" Monarch Model 60 Engine Lathe, Model 60, 20.5" Swing, 54" Between Centers, 10" 6 Jaw ...more
20.5" x 54" Monarch #60, Engine Lathe, 1-5/8" Bore, 11" swing over cross slide, 6 jaw 10" chuck, quickchange toolpost, Steady Rest
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Monarch
Model: 60
THE MONARCH MODEL 60 IS AN ENGINE LATHE WITH A LISTED SWING CAPACITY OF 20.5 INCHES AND A DISTANCE BETWEEN CENTERS OF 54 INCHES. AN ALTERNATE SWING IS 16 INCHES WITH A CENTER DISTANCE OF 57 INCHES. THE SWING OVER THE CROSS SLIDE MEASURES 11 INCHES. THE SPINDLE BORE IS SPECIFIED AS 1 5/8 INCHES, THOUGH 1.5 INCHES IS ...more
22" x 60" Yam #1500H, heavy duty geared engine lathe, 10" 4-jaw chuck, 2.3" bore, 10 HP, 1500 RPM, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Yam
Model: 1500H
Spec Sheet:, 22" x 60" Yam 1500H Heavy Duty Geared Engine Lathe, Key for YAM 1500 Series Lathes:, Swing Over Bed: 22" (558.8 mm), Distance Between Centers: 60" (standard 1500 series), Swing Over Cross Slide: 10.5", Spindle Bore: 2" - 2.3" (50.8 mm - 58.4 mm), Spindle Speeds: (12) 25 - 1500 RPM, Motor: 10 HP (7.5 kW) ...more
22.2" x 72" Leblond #F21-Regal, Engine Lathe, 14.25" swing over cross slide, 2.19" bore, 10 HP, 1080 RPM, tailstock, digital read out
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: F21-REGAL
THE LEBLOND F21 REGAL ENGINE LATHE S AN ACTUAL SWING OVER THE BED WAYS OF 22.25 INCHES, A RATED SWING OF 21 INCHES, AND A 72-INCH DISTANCE BETWEEN CENTERS. THE SWING OVER THE CROSS SLIDE MEASURES 14.25 INCHES, WITH THE CROSS-SLIDE OFFERING 13.25 INCHES OF TRAVEL. THE SPINDLE BORE IS 2.1875 INCHES, DRIVEN BY A 10 HP ...more
25" x 54" LeBlond #19-Regal, servo shift lathe, 15" swing over cross slide, 15.75" Bison 3-jaw chuck, 2" bore, 10 HP, 45-1800 RPM, L1 spindle mount, Sony 2-Axis digital read out, taper, quick change toolpost, Trav-A-Dial indicator
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
Spec Sheet:, 25" x 54" LeBlond Regal Lathe, Swing: 25", Between Centers: 54", Swing Over the Cross Slide: 15", Servo Shift, Spindle Speeds 45-1800, Sony 2 Axis Digital Readout, Taper Attachment, 3" Raised lathe, Micro Stop, 15.75 Bison 3 Jaw Chuck, L1 Spindle Mount, Quick Change Toolpost, Trav-A-Dial Indicator ...more
25" x 120" Daewoo Ikegai #DA25, Engine Lathe, 2.2" bore, 2000 RPM, 15 HP, inch/metric thread, 1981
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Ikegai
Model: DA25
Year: 1981
THIS HIGH-SPEED PRECISION ENGINE LATHE S A 25-INCH RATED SWING OVER THE BED WAYS (24.4 INCHES ACTUAL) AND A 15.5-INCH SWING OVER THE CARRIAGE, WITH A DISTANCE OF 120 INCHES BETWEEN CENTERS. THE SPINDLE HAS A 2.2-INCH HOLE AND OFFERS 20 SPEEDS RANGING FROM 25 TO 2000 RPM, POWERED BY A 15 HP MOTOR. ITS THREADING ...more
26.5" x 96" Lodge & Shipley #RXE-2516, PowerTurn Engine Lathe, 30 HP, 20" swing over cross slide, 1000 RPM, inch threading
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Lodge & Shipley
Model: RXE-2516
THE LODGE & SHIPLEY "POWERTURN" GAP-TYPE ENGINE LATHE, MODEL RXE 2516, IS POWERED BY A 30 HP MAIN MOTOR AND S A 2.5-INCH HOLE THROUGH THE SPINDLE. THE LATHE HAS AN ACTUAL SWING OVER THE BED WAYS AND CARRIAGE WINGS OF 26.5 INCHES, A RATED SWING OF 25 INCHES, AND A SWING OVER THE CROSS-SLIDE OF 20 INCHES. ...more
15.5" Leblond #15-Regal, Engine Lathe, 9.5" swing over cross slide, 1800 RPM, rebuilt 1992
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 15-REGAL
THE LEBLOND 15 REGAL ENGINE LATHE S A 15-INCH RATED SWING OVER THE BED (15.5-INCH ACTUAL) AND A 9.5-INCH SWING OVER THE CROSS SLIDE. IT IS AVAILABLE WITH A DISTANCE BETWEEN CENTERS THAT VARIES, INCLUDING 30 INCHES, 36 INCHES, OR 54 INCHES. THE SPINDLE SPEEDS ARE MANAGED THROUGH 12 SETTINGS, TYPICALLY RANGING FROM 45 ...more
