19 Results
30" x .06" Herr Voss / Herr Voss, hi-speed blanking line, 20000 lb., 20" ID, 72" OD, 125 FPM
Galaxie Corporation | Wayne, MI
Category: Cut-to-length Lines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Herr Voss
Coil Capacity: 20,000# Thickness Range:.015” -.060” Minimum Strip Width: 2.5” Maximum Strip Width: 30” Coil OD: 72” Coil ID: 20” Sheet Length: 2” - 168” Pack Height: 20” Pack Weight: 10,000# Line Speed: 125 FPM Grade: 45K KSI Complete Line With: L-Type Coil Car ...more
48" x .045" Herr Voss, Cut-To-Length line, coil car, uncoiler, precision leveler
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Herr Voss Cut-to-Length Line, -Width: 48" (1220mm), -Thickness: 0.012" - 0.045" (0.3 - 1.15mm), -Material: CR GI, -Line Direction: Right to Left, Consisting of:, -Entry Coil Car:, Self-Contained Hydraulics, Pendant Control, -Uncoiler:, Hydraulic Expansion, Pumpkin Tooth Drum, Powered Holddown Roll, Threading Drive ...more
48" x .075" Cincinnati / Herr Voss, Cut-To-Length line Line, 40000 Lbs., 12"-48" Input Coil Width, 23"-192" Cut Sheet Length
VX Machinery | Sylvania, OH
Category: Cut-to-length Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Herr Voss
This Cincinnati/Herr-Voss Cut to Length Line is a robust industrial solution, designed for processing stainless steel materials with a width range of 12" to 48" and thicknesses from.028" to.075". Capable of handling a maximum coil weight of 40,000 lbs, it efficiently cuts sheets ranging from 23" to 192" in length. ...more
48" x .8" Herr Voss, Cut-To-Length line, 20000 lbs., w/ precision leveler, coil car, reel, shear, stacking, crane, & controls
iGAM | Detroit, MI
Category: Cut-to-length Lines
Seller: iGAM
Location: Detroit, MI
Mfr: Herr Voss
COIL CAR 20,000 LBS X 48", ROWE COIL REEL 20,000 LBS x 48", SERIAL R35280.5, MODEL 200048 DSJ, COIL ID 19" TO 24.5", COIL OD 60", SPEED 150FPM, PUMPKIN TOOTH MANDREL, HOLD DON ARM, THREADING TABLE, HYDRAULIC LIFT, LEVELLER, SERIAL 28100-6, MODEL VKL RH 66/1.750-19/7 4 HI PR, WIDTH 66", CAPACITY 48" x.020 to.080" @80K ...more
72" x .067" Rowe / Herr Voss, Cut-To-Length line, 40000 lb., 160 FPM
VX Machinery | Sylvania, OH
Category: Cut-to-length Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Herr Voss
The 72" x 40,000 lb. Rowe/Herr-Voss cut-to-length line, is a robust and efficient solution designed for processing cold rolled mild steel. This equipment accommodates a maximum coil width of 72 inches and coil weight of 40,000 lbs. It is capable of handling material thicknesses ranging from.020" to.075", with maximum ...more
Get email updates for newly added Cut-to-length Lines
Cut-to-Length Lines (also known as CTL lines or sheet metal cutting lines) are systems designed to uncoil, level, and cut metal coils into flat sheets or plates of specific lengths. Widely used in industries like automotive, construction, and appliance manufacturing, these lines ensure high accuracy and flatness, producing uniform sheets for various applications. Cut-to-length lines streamline production with efficient, high-speed processing, making them ideal for meeting precise dimensional requirements.
72" x .075" Rowe / Herr Voss, Cut-To-Length line, 40000 lb., 6-Hi precision leveler, high speed shear, stacker
Midwest Machinery LLC | Livonia, MI
Category: Cut-to-length Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Herr Voss
Make: Rowe / Herr Voss, Material Width: 12" - 72", Material Thickness:.020" -.075", Weight Capacity: 40,000Lb, Coil ID: 20", Coil OD: 72", Speed: 160 feet per minute, Sheet Max Length :12', Direction: R-L, Entry Coil Car, Floor Standing V-Type Design, Powered Lift & Traverse, Control Panel, Mandrel Uncoiler ...more
72" x .105" McKay / Herr Voss, Cut-To-Length line, 50000 lb.
National Machinery Exchange | Newark, NJ
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Herr Voss
72" x .135" Wysong Herr Voss, Cut-To-Length line, 40000 lb., L to R, 200 FPM, w/ entry L-type coil car, uncoiler
National Machinery Exchange | Newark, NJ
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Herr Voss
72" x.135" x 40,000# WYSONG/HERR VOSS CUT TO LENGTH LINE, Make: Herr Voss - Wysong, Material: CR, HR, Stainless, Aluminum, Material Width: 12" - 72", Material Thickness:.030" -.135" (-030 -.187" @ 60"), Weight Capacity: 40,000Lb, Coil ID: 20" - 24", Coil OD: 72", Direction: L-R, Speed: 200 feet per minute, Entry ...more
72" x .142" Herr Voss, Cut-To-Length line, 50000 lb., leveler, peeler, pinch roll
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
72" x 0.142" x 50,000# Herr Voss Cut-to-Length Line, Consisting of:, -Pit Type Coil Lift:, -Cone Type Uncoiler:, -Peeler / Pinch Roll Unit:, -3 Roll Coil Breaker:, with Backup Bearings, -Precision Leveler:, Model: VKL LH 86/2.062-19/7 4 HI, Gauge Range: 0.033" - 0.142" (45K HSLA Yield), 19 Work Rolls, 2.062" Dia. x ...more
JUST ADDED!
72" x .5" Herr Voss, Cut-To-Length line, 60,000 lb., 20"-34" ID, 82" outside dimension, 160 FPM, LR, 4-Hi leveler, mechanical shear
Midwest Machinery LLC | Livonia, MI
Category: Cut-to-length Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Herr Voss
Make: Herr Voss, Material Width: 30" - 72", Material Thickness:.090" -.500", Coil Weight: 60,000Lb, Coil ID: 20" - 34", Coil OD: 82", Direction: Left to Right, Speed: 160 fpm, Coil Storage Ramp, Three (3) Coils Capacity, Pit Type V-Coil Car, Powered Lift & Traverse, Double Cone Uncoiler, Powered Hold- Down Roll ...more
72" x .5" Herr Voss, Cut-To-Length line line, Red Bud Stretch Cut-To-Length line, 60000 lb., 30"-72" strip width, 20"-30" coil I.D., 39"-84" coil O.D., 175 FPM, 1995
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Year: 1995
72" x 0.500" x 60,000# Herr Voss Cut to Length Line, With New Red Bud Stretcher Leveler Retrofit System, Strip Width: 30" to 72", Strip Thickness: 0.096" - 0.500" @ 40,000 PSI, Coil I.D. Range: 20" to 30", Coil O.D. Range: 39" to 84", Coil Weight: 60,000 lbs., Sheet Length: 24" to 24', Stack Height: 18" (including ...more
72" x 0.075" Herr Voss, Multiblanking Line, 20 ton, L to R, 16"-20" coil inner diameter, mandrel uncoiler, 100 HP 19-roll leveler
National Machinery Exchange | Newark, NJ
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Herr Voss
MANUFACTURER - HERR VOSS, TYPE - MULTIBLANKING LINE, SHEAR CAPABILITY - STRAIGHT CUT & TRAPAZOID, STATUS - INSTALLED & UNDER POWER, MATERIAL WIDTH - 72" MAX - 12" MIN, MATERIAL THICKNESS - 0.018" MIN - 0.075" MAX LEVELER, 0.105" WITHOUT LEVELER, COIL WEIGHT - 40,000# (20 TON), COIL ID - 16" - 20", COIL OD - ...more
74" x .375" Herr Voss, Cut To Length Line, 60000 Lb., 36-74" width, 20-34" ID coil, 84" outside dimension coil max, 20-175 FPM line speed
VX Machinery | Sylvania, OH
Category: Cut-to-length Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Herr Voss
This 74" x 0.375" x 60,000 lb Herr Voss Cut-to-Length Line, manufactured in 1995, is designed for efficient processing of metal coils. It supports a range of material widths from 36" to 74" and thicknesses from 0.075" to 0.375" with a yield strength of 80,000 PSI. The line can handle coil weights up to 60,000 lbs and ...more
74" x .375" Herr Voss, Cut-To-Length line, 60000 lb.
Met-Pro Machinery Inc | Detroit, MI
Category: Cut-to-length Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Herr Voss
74" x 0.375" x 60,000# Herr Voss Cut To Length Line, -36" to 74" Wide -60,000 lbs., Coil Weight -0.075" to 0.375" Thick (at 80,000 PSI Yield), -20" to 34" Coil I.D. Range, -84" Max. Coil O.D., -50 FPM Jog Speed-20 to 175 FPM Line Speed, -Left to Right Line Direction Consisting of the following:, -Entry Coil Ramp: 3 ...more
74" x .375" Herr Voss, Cut-To-Length line, 6000 lb., 84" OD, 20-34" ID
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
74" x 0.500" x 60,000# Herr Voss Cut To Length Line, -Material Width: 36" to 74", -Coil Weight: 60,000 lbs., -Material Thickness: 0.075" to 0.500 (at 45,000 PSI Yield), 0.375" (at 80,000 PSI Yield), -Coil I.D. Range: 20" to 34", -Coil O.D.: 84" Max., -Jog Speed: 50 FPM, -Line Speed: 20 to 175 FPM, -Line Direction: ...more
74" x .5" Herr Voss, Cut-To-Length line, Red Bud Stretch leveler retrofit, 60000 lb., 84" OD, 20"-34" ID, 50 FPM, 11 work rolls, 1995
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Year: 1995
74" x 0.500" x 60,000# Herr Voss Cut To Length Line, With New Red Bud Stretcher Leveler Retrofit System, -Material Width: 36" to 74", -Coil Weight: 60,000 lbs., -Material Thickness: 0.075" to 0.500 (at 45,000 PSI Yield), 0.375" (at 80,000 PSI Yield), -Coil I.D. Range: 20" to 34", -Coil O.D.: 84" Max., -Jog Speed: 50 ...more
96" x .375" Herr Voss, Cut-To-Length line, 40000 lb., 80" OD, 20"-30" ID, 100 FPM, 1992
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr Voss
Year: 1992
Materials: CRS, SS, Aluminum, Coil Width Range: 24" - 96", Thickness Range @ 96": 0.125" - 0.375" Aluminum @ 35,000 PSI, 0.125" - 0.250" Aluminum @ 55,000 PSI, 0.125" - 0.312" SS @ 40,000 PSI, 0.125" - 0.250" SS @ 70,000 PSI, Maximum Shear: 50,000 PSI, Maximum Yield: 80,000 PSI, Maximum Coil Weight: 40,000 lbs., Coil ...more
Herr Voss, Cut-To-Length line, 30,000 lbs., 20"/24" -65" ID, 0.024-0.07" thick, 96" sheet L, 6-high leveler
VX Machinery | Sylvania, OH
Category: Cut-to-length Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Herr Voss
This 48” x.070" x 30,000 lbs. Herr-Voss Cut-To-Length Line, manufactured by Rowe/Herr-Voss, is designed to efficiently process metal coils. It accommodates a coil ID of 20" or 24" with a maximum OD of 72" and supports a coil weight of up to 30,000 lbs. The line is capable of handling material thickness ranging ...more
Herr Voss, Cut-To-Length line, 30,000 lbs., 20"/24" -65" ID, 0.024-0.07" thick, 10-60" width, 144" sheet L, 4-high leveler
VX Machinery | Sylvania, OH
Category: Cut-to-length Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Herr Voss
The 60” x.070" x 30,000 Lbs. Rowe/Herr-Voss Cut-To-Length Line is a versatile and efficient system engineered for precision cutting. This used machinery is equipped to handle materials with a minimum width of 10 inches and a maximum width of 60 inches, with thicknesses ranging from 0.024 to 0.070 inches. It ...more
