2051 - 2100 of 2122 listings
JUST ADDED!
Tsugami #M08SY, 5-Axis CNC Lathe, 8.7" X, 1.97" Y, 15.75" Z, 11" swing, 14.96" machining length, 8" chuck, 2.5" bar, 14.8 HP, 4500 RPM, 2014
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Tsugami
Model: M08SY
Year: 2014
Used CNC Lathe available, featuring 4-axis control, 14.96" machining length, 8" chuck size, and 2.5" bar capacity. live tooling, Y-axis, sub spindle, and Iemca I-Flex 6 barfeeder. Max RPM 4500, power 14.8 hp., Machining Length 14.96", X Travel 8.7", Z Travel 15.75", Y Travel 1.97", Chuck Size 8", Bar Capacity 2.56" ...more
JUST ADDED!
Tsugami #M08SY, CNC lathe, live tooling, sub spindle, 8" chuck, 2.5" bar, Iemca I-Flex 6 barfeeder, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Tsugami
Model: M08SY
Year: 2014
TSUGAMI M08SY CNC Lathe, LIVE TOOLING Yes, Y-AXIS Yes, SUB SPINDLE Yes, MACHINING LENGTH 14.96″, X TRAVEL 8.7″, Z TRAVEL 15.75″, Y TRAVEL 1.97″, CHUCK SIZE 8″, BAR CAPACITY 2.56″, POWER 14.8 hp, MAX RPM 4,500 RPM, BARFEED Yes, CONTROL CNC, DIMENSIONS 97.24 in. x 72.83 in. x 75.98 ...more
Tsugami #M08SY, with sub spindle, Live Tooling, and Y-Axis, 2.5" Bar, 11.2" Turn, Barfeed, Mist, Low Hours, 2014
Tight Tolerance Machinery | Peoria, AZ
Category: CNC Lathes and Turning Centers
Seller: Tight Tolerance Machinery
Location: Peoria, AZ
Mfr: Tsugami
Model: M08SY
Year: 2014
Tsugami M08SY CNC Turning Center with Sub-Spindle, Live Tooling, and Y-Axis, NEW: 2014, Max Turning Dia.11.2", Max Turning Length.14.96", Distance Between Spindles.19.92", X-Axis Travel.8.7", Y-Axis Travel.3.94", Z-Axis Travel.15.75", C-Axis Travel.0.001 Deg, W-Axis Travel.19.92", Spindle Motor.15 HP, Spindle ...more
Tsugami #M08SY, CNC lathe
Universal Automatics | Richfield, OH
Category: CNC Lathes and Turning Centers
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Tsugami
Model: M08SY
Year: 2015
(2) TSUGAMI M08SY CNC Turning Centers (used) New 2015, - tons of tooling - live and stationary for turret and collets, etc, LNS Chip Conveyors, All Royal collet chucks, Bar Feed Interface, Patrol light, All manuals and tool kits, sub spindle, Y axis turret., 2015 TSUGAMI M08SY, # Axis. 6.
Tsugami #M08SY-II, turning center, 8" chuck, 12 turret, Y-Axis, Fanuc 0i-TF, LNS Servo Quick Load 80" S2 bar feed, 2022
Silverlight CNC | Barrington, IL
Category: CNC Lathes and Turning Centers
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Tsugami
Model: M08SY-II
Year: 2022
The Tsugami M08SY-II Turning Center with Y-axis allows you to perform highly complex machining, such as turning, drilling, boring, cross-drilling and CNC milling. The main and subspindle are integral built-in spindle motors which minimize vibration and provide superior accel/decel for heavy duty cutting and fine ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
Tsugami #M08SYII, live tool Y-Axis CNC lathe, sub spindle, gantry load, barfeed, 2020
Asset Exchange Corporation | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Tsugami
Model: M08SYII
Year: 2020
Overview, Type: Lathes CNC Manufacturer: M08SY-II Model: M08SY-II Year: 2020 Stock #: 62162 Status: For Sale, Tsugami M08SYII Live Tool Y Axis CNC Lathe with Sub Spindle (2020), Max. Machining Diameter 280 mm (11.02"), Max. Machining Length 380 mm (14.96"), Distance Between Spindles 508mm (20.0"), Max. Chuck Size 8" ...more
Tsugami #S205, Fanuc 32iB, 12' Iemca Elite 220E 37" XL bar feeder, 2014
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Tsugami
Model: S205
Year: 2014
Used Tsugami S205. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Tsugami CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today. ...more
Tsugami #SS20, CNC Swiss Lathe, 7-Axis0.75" Machining diameter, 8.66" Machining length, 0.39" drilling diameter, 24 Tool capacity, 2008
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Tsugami
Model: SS20
Year: 2008
2008 TSUGAMI SS20, MACHINING DIAMETER 0.75″, MAX MACHINING LENGTH 8.66″, MAX DRILLING DIAMETER 0.39″, MAIN SPINDLE MOTOR 5 hp, MAIN SPINDLE SPEED 10,000 RPM, BACK SPINDLE MOTOR 5 hp, BACK SPINDLE SPEED 10,000 RPM, TOTAL TOOL CAPACITY (POSITIONS) 24, LIVE TOOL SPEEDS 5,000 RPM, CONTROLLABLE AXES 7 ...more
Tsugami #TMA8F, 6" Axis CNC Milling & Turning Center, 8.66" max. diameter, 22.83" max. length, 2.5" bar stock, 20 HP, 5000 RPM, 60 ATC, Fanuc 31i-B5, 2022
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Tsugami
Model: TMA8F
Year: 2022
Boost your shop's efficiency with the 2022 Tsugami TMA8F 6-Axis CNC Milling and Turning Center. Perfect for complex machining with full 5-axis capability, 60 CAPTO C4 tools, and FANUC 31i-B5 control. Maximize precision with high rigidity and glass scales., Maximum Bar Stock 65 mm, 2.56, Maximum Work Diameter 220 ...more
JUST ADDED!
Tsunglin #TTB36BL, CNC Lathe, 30.7" Swing, 60" Machining length, 18" Chuck, 6.5" Bore, 19.7" Turning diameter, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Tsunglin
Model: TTB36BL
Year: 2012
Used CNC Lathe: 30.7" swing, 60" machining length, 18" chuck size. Includes chip conveyor, tailstock, and 18" chuck. Excellent for precision work, offering a turning diameter of 19.7" and X-axis travel of 12"., SWING 30.7", TURNING LENGTH 60", TURNING DIAMETER 19.7", CHUCK SIZE 18", SPINDLE BORE 6.5", X-AXIS TRAVEL 12".
Vanguard #CAK80485D, 2-Axis flat bed CNC lathe, Fanuc Oi Mate, 4-jaw 25" chuck, 32" swing, 191" centers, 4.1" bar, 2007
Asset Exchange Corporation | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Vanguard
Model: CAK80485D
Year: 2007
Overview, Type: Lathes CNC Manufacturer: CAK80485D Model: CAK80485D Year: 2007 Stock #: 92266 Status: For Sale Serial #: GP06131010E Country: United States, ImperialMetricsize 25" chuck 25" chuck Swing 33" 838.2 mm Machining Length 204" 5,181.6 mm # Axis 2 2 Chuck Size 25" 635 mm Bar Capacity ...more
Vanguard #CAK80485D, 2-Axis CNC Lathe, 32" swing, 18.9" turning diameter, 191" machining length, 28" chuck, 4.13" bore, 20 HP, 1000 RPM, tailstock, 2007
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Vanguard
Model: CAK80485D
Year: 2007
2007 Vanguard CAK80485D CNC Lathe available, featuring 33" swing, 204" machining length, 25" chuck size, and 20 hp power. Fanuc control, 4-jaw chuck, steady rests, and more., 2007 VANGUARD CAK80485D, Swing. 33", Machining Length. 204", # Axis. 2, Chuck Size. 25", Bar Capacity. 4.13", Power. 20 hp, Max RPM. 1,000 RPM ...more
Vanguard #CAK80485D, CNC lathe, Fanuc OI Cnc, 28" chuck, 191" centers, tailstock, 20 HP, 2007
Used Solutions Inc | Algonquin, IL
Category: CNC Lathes and Turning Centers
Seller: Used Solutions Inc
Location: Algonquin, IL
Mfr: Vanguard
Model: CAK80485D
Year: 2007
Victor Taichung #VMT-X260, 26" swing, 10" chuck, 2.9" bar, 54.2" centers, 19.7"dia., 42.3"lgth, Semens One, 5-Axis, RPM660 part setter
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Victor
Model: VMT-X260
Year: 2024
Experience precision with the 2024 Victor Taichung VMT-X260 CNC Lathe. Featuring Y-Axis, dual 10" chucks, and Siemens 5-axis control, it handles complex tasks effortlessly. Maximize efficiency with a 12,000 RPM milling spindle and 29.5 HP power., 2024 VICTOR TAICHUNG VMT-X260, Swing Over Bed. 26", Turning Diameter. ...more
Victor #VTurn-46, CNC lathe, 32.2" swing, 15" chuck, 4.5" bar, 68.8" centers, 20.47"dia., 64.96"lgth, A2-11, 10 turret, Fanuc OI-TF Plus, 2012
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Victor
Model: VTURN-46
Year: 2012
2012 FORTUNE VTurn 46 CNC Lathe, 2 & 3-Axis, used condition. s: 32.28 swing, 64.96 machining length, FANUC OI-TF PLUS control, chip conveyor, misc. toolholders, manuals. Offers 68.4 hp, A2-11 spindle, 1,500 RPM, and 472/590 in/min rapid traverse., 2012 FORTUNE V-TURN 46, Swing Over Bed. 32.28", Machining Length. ...more
Victor #VTurn-A26/85, 31.4" swing, 10" chuck, 2.9" bar, Fanuc 0TD, 3500 RPM, programmable tailstock, 2012
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Victor
Model: VTURN-A26/85
Year: 2012
31.5" X 16.5" X 53.5" Heavy Duty 2 Axis Turning with Fanuc 0TD Control, 3500 RPM Direct Drive Spindle, Fully Programmable Tailstock. Note: Photos shown are for reference use only. Note: Photos shown are for reference use only., Swing over bed 31.49”Swing over Carriage 27.55”Distance Between Centers ...more
Victor TaiChung #Vturn-36, CNC lathe, 25.6" swing, 15" chuck, 3.5" bar, 35" centers, 17.5"dia., 33.7"lgth, Fanuc Oi-TF, tailstock, 2015
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Victor
Model: VTURN-36
Year: 2022
FORTUNE Vturn-36, 2022 model. This used 2-axis CNC lathe s 25.6" swing over bed, 33.7" machining length, and 17.5" turning diameter. a 15" chuck, 50 hp spindle, and A2-11 spindle nose. Ideal for precise machining demands., 2022 FORTUNE V-TURN 36, Swing Over Bed. 26.7", Machining Length. 35", Turning Diameter, Shaft ...more
Victor #Vturn-46, 2-Axis boxed way CNC lathe, Fanuc 0i-TF Plus, 32.2" swing, 15" chuck, 4.5" bar, 2012
Ditter Industries Inc | Lake Villa, IL
Category: CNC Lathes and Turning Centers
Seller: Ditter Industries Inc
Location: Lake Villa, IL
Mfr: Victor
Model: VTURN-46
Year: 2012
Manufacturer: VICTOR TAICHUNG Model: Vturn 46 Year: 2012 Stock #: 41840 Status: For Sale Swing 32.28" Machining Length 64.96" # Axis 2 Chuck Size 15" Bar Capacity 4.52" Power 68.4 hp Max RPM 1,500 RPM Turning Dia 28.74" Tailstock Yes Live Tooling No Sub Spindle No Control CNC (Fanuc Oi-TF Plus) Weight 28,160 lbs. TWO ...more
Viper #VT-40BMX2000, CNC lathe, 39.3" swing, 24" chuck, 3-jaw, 7.2" bar, 33.85" dia., 76.8" lgth, A2-15, 12 turret, Fanuc OI-TD, tailstock, live tooling, 2013
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Viper
Model: VT-40BMX2000
Year: 2013
2013 VIPER VT-40BMX2000, Swing Over Bed. 39.37", Machining Length. 76.8", Turning Diameter, Shaft Diameter. 33.85", Chuck Size 1. 24", Spindle Nose 1. A2-15, Spindle Bore Diameter 1. 10.2", Spindle Bar Capacity 1. 7.28", Spindle Speeds 1. 1,500 RPM, Spindle Horsepower 1. 50 hp, X1 - Axis Travel. 16.931", Z1 - Axis ...more
JUST ADDED!
Voest-Alpine #DA-250, CNC lathe, 5.5 kW, 550 V., 60 Hz., 1979
Star Equipment Co., Inc. | Utica, MI
Category: CNC Lathes and Turning Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Voest-Alpine
Model: DA 250
Year: 1979
Voest-Alpine DA 250 Lathe, manufactured in 1979, 5.5kW motor, operates at 3x550V, and 60Hz frequency., * Manufacturer: Voest-Alpine, * Model: DA 250, * Year of Manufacture: 1979, * Motor Power: 5.5 kW, * Voltage: 3x550V, * Frequency: 60HZ, 1979 VOEST-ALPINE DA 250, Swing. 13", Machining Length. 54", # Axis. 0, Chuck ...more
Warner & Swasey #M-5940, 12" chuck, Fanuc 10T, 3.5" hole, 1990
Deal Makers Machinery | Thousand Oaks, CA
Category: CNC Lathes and Turning Centers
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Warner & Swasey
Model: M-5940
Year: 1990
30 HP, 26"X40", 3000 RPM, 12 STATION TURRET, CHIP CONVEYOR.
Weiler #E50/2, CNC flat bed lathe, 22" swing, 78" centers, 3" spdl bore, 12" chuck, 2500 RPM, Siemens 805D, rebuilt 2014
G-2000 | Toledo, OH
Category: CNC Lathes and Turning Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Weiler
Model: E50/2
Year: 1996
SERIAL.: 487, MODEL.: E50/2, SWING OVER BED.: 22.4", SWING OVER CROSS SLIDE.: 13", DISTANCE BETWEEN CENTERS.: 78", SPINDLE BORE.: 3", CHUCK SIZE.: 12", MAX RPM.: 2500, TAILSTOCK.: YES, STEADY REST.: YES, BORING BAR HOLDER.: YES, TAILSTOCK TAPER.: MT#5, CONTROL.: SIEMENS 805D, MACHINE REBUILT IN 2014, Machine ...more
Weiler #E80X4500, flat bed CNC lathe, 34" swing, 20" SOCS, 31" chuck, 4-jaw, 6.5" bore, 177" centers, 48 HP, #6MT, tailstock, steady & follow, 2017
ACT Machinery | Fullerton, CA
Category: CNC Lathes and Turning Centers
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Weiler
Model: E80X4500
Year: 2017
, CNC Control, yes, Swing, 34", Swing Over Cross Slide, 20", Center Distance, 177.17", Motor Size, 48 HP, Spindle Speed, Stepless 1 - 1800 RPM, Feeds, Stepless inch 1/64" - 112 TPI, Spindle Bore, 6 1/2", Tailstock, #6 M.T., SCREEN SIZE, 15", The Weiler E80 x 4500 has state of the art ...more
Weiler #E80X4500, CNC lathe, 34" swing, 31" chuck, 4-jaw, 6.5" bore, 177.1" centers, Weiler Control, Steady Rest & follow, 2017
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Weiler
Model: E80X4500
Year: 2017
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Weiler CNC Control, Coolant System, Capacity: ...more
Weiler #E90, Weiler CNC, 35.4" swing, 28" chuck, 28" rear chuck, 15" steady rest, chip conveyor, 2008
Machinery Systems Inc. | Schaumburg, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Systems Inc.
Location: Schaumburg, IL
Mfr: Weiler
Model: E90
Year: 2008
MACHINE, Year 2008, Control Type Weiler CNC, Swing 35.4, Machining Length 120, Spindle Speed 1100 RPM, Chuck 28, 28 Rear Chuck, Steady Rest (15), Chip Conveyor.
JUST ADDED!
Weiler #E90, CNC Lathe, 35.4" Swing, 120" Centers, 31" Chuck, 14.2" Bar, 23.6" Bed width, 14" Bore, 1-700 RPM, 2008
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Weiler
Model: E90
Year: 2008
Maximum swing 35.40, Bar capacity 14.2, Chuck diameter 31.00, Distance Between Centers 120, Swing over Bed 35.4, Swing over Cross Slide 20.9, Cross Slide Travel 23.2, Bed Width 23.6, Drive Power at 60 %/100 % Duty Cycle 60/49.6 HP, Spindle Bore 14.0", Spindle Speed 1 ~ 700 RPM, Tailstock Quill Taper MT 6, Weight ...more
Weingartner #FINISH-320-7000, CNC Spiral finishing lathe, chip conveyor, 1997
HTR Global Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Weingartner
Model: FINISH-320-7000
Year: 1997
WEINGARTNER CNC SPIRAL FINISHING LATHE Model FINISH 320-7000, Serial number SN: 0138, Year of manufacture 1997, Maximum polishing diameter 12.6", Maximum part length 275", Maximum polishing length 255", Spindle center height 49", Cross slide stroke range 2- 6", Quill diameter 8.6", Polishing head degrees swivel angle ...more
Weingartner #Finish-320-7000, spiral finishing lathe, chip conveyor, central lube, 2008
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Weingartner
Model: FINISH-320-7000
Year: 2008
Weingartner Finish 320-7000 Spiral Finishing Lathe, Weingartner Finish 320-7000 Spiral Finishing Lathe, New: 2008, Max Polishing Diameter: 12.6", Maximum Part Length: 275", Maximum Polishing Length: 255", Spindle Center Height: 49", Cross Slide Stroke Range: 2-6", Quill Diameter: 8.6", Polishing Head Swivel Angle: +/- ...more
Willis #ENC2680, CNC flatbed lathe, 26" swing, 20" 3-jaw chuck, 4" bore, 80" centers, 10-1400 RPM, Anilam 4200 T, coolant, 2007
G-2000 | Toledo, OH
Category: CNC Lathes and Turning Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Willis
Model: ENC2680
Year: 2007
SERIAL.: 0051, MODEL.: ENC-2680, YEAR OF MANUFACTURER.: 2007, SWING OVER BED.: 26", SWING OVER CROSS SLIDE.: 18", DISTANCE BETWEEN CENTERS.: 80", SPINDLE BORE.: 4", SPINDLE SPEEDS.: 10 - 1400 RPM, CONTROL.: ANILAM 4200 T, COOLANT SYSTEM.: YES, CHUCK SIZE.: 20" 3 JAW, Machine Type.Lathes, Flat Bed, CNC ...more
Wohlenberg #PT1-1250II, CNC lathe, Sinumerik 820T, 2-Axis, 51" x 209", 35.43" swing over cross slide, 1996
TDI Group LLC | Pittsburgh, PA
Category: CNC Lathes and Turning Centers
Seller: TDI Group LLC
Location: Pittsburgh, PA
Mfr: Wohlenberg
Model: PT1-1250II
Year: 1996
, 51.57" x 209", 30" Diamter 4 Jaw Chuck, Siemens Sinumerik 810T Programmable CNC Control, Axis (X,Z), 1 CNC Spindle w/ Speed Indicator, Chip Conveyor, New Four Position Saunter Turret Four Position Rotating Tool Holder, Bed Lengthend from original Design +50" Apptox., see photos.
Yama Seiki #GA-2000, CNC lathe, 22.8" swing, 8" chuck, 3-jaw, 2" bar, 13.78" diameter, 23.6" length, A2-6, Fanuc 0iTD, tailstock, chip conveyor, 2011
Machinery Values Inc | Harrison, NJ
Category: CNC Lathes and Turning Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Yama Seiki
Model: GA-2000
Year: 2011
Yama Seiki GA-2000 CNC TURNING CENTER NEW: 2011 VIDEO LINK: https://youtu.be/ITu7unqt8zg:SWING OVER BED. 22.83"SWING OVER SADDLE. 15.75"MAX. TURNING DIA. 13.78"MAX. TURNING LENGTH. 23.6"MAX. WORKPIECE WEIGHT. 517.6 lbs. w/TAILSTOCKTURRET HEAD TYPE. DRUMNO. OF TOOL STATIONS. 12TOOL SIZE, SQUARE. ...more
Yama Seiki #GA-2000, CNC Lathe, 22.8" swing, 13.78" turning diameter, 23.6" machining length, 8" chuck, 2" bar, A2-6, 20 HP, 4800 RPM, tailstock, Fanuc Oi-TD control, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GA-2000
Year: 2011
Used CNC Lathe, 22.83" swing, 47.4" length, with 8" chuck and tailstock. Includes FANUC control, chip conveyor., SWING OVER BED. 22.83", SWING OVER SADDLE. 15.75", MAX. TURNING DIA. 13.78", MAX. TURNING LENGTH. 23.6", MAX. WORKPIECE WEIGHT. 517.6 lbs. w/TAILSTOCK, TURRET HEAD TYPE. DRUM, NO. OF TOOL STATIONS. 12, TOOL ...more
Yama Seiki #GA-3600, CNC turning center, Fanuc 0iTC, 23.6" swing, 4.1" bar, 30 HP, 2005
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Yama Seiki
Model: GA-3600
Year: 2006
2006 YAMA SEIKI GA-3600, Swing. 23.62", Machining Length. 23.46", X-Axis. 10.2", Z-Axis. 48.43", Bar Capacity. 4.13", Power. 30 hp, Max RPM. 2,500 RPM, Weight. 16,000 Lbs, Fanuc Series Oi-TC Control, Chip Conveyor.
JUST ADDED!
Yama Seiki #GA-3600LM, CNC Lathe, 23.6" Swing, 15" Chuck, 4.1" Bar, 19.7" diameter x 47" L Turning Size, 25 HP, 2500 RPM, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GA-3600LM
Year: 2012
Used CNC Lathe, featuring 599mm max swing over saddle, 500mm turning diameter, 4 live tool holders, chip conveyor, and coolant unit. FANUC Oi-TD. Weight: 7,000 kg., CAPACITY :, Max. / Swing over saddle mm(in) : 599 mm (23.6), Max. Turning Diameter mm(in) : 500 mm (19.7), Max. Turning Length mm(in) : 1194 mm (47.00) ...more
Yama Seiki #GLS-200M, CNC Turning Center, 18.1" swing diameter, 8" chuck, 2" bar
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Yama Seiki
Model: GLS-200M
CAPACITY:, MAX. SWING DIAMETER ------------------- 18.11 in, SWING OVER SADDLE --------------------- 14.96 in, MAX. TURNING DIAMETER ----------------- 12.59 in, MAX. TURNING LENGTH ------------------- 19.68 in, CHUCK SIZE ---------------------------- 8 in, BAR CAPACITY -------------------------- 2 in, SPINDLE:, HOLE ...more
Yama Seiki #GLS-2000, CNC Lathe, 22" swing, 8" chuck, 2.5" bar, 22.6" centers, Fanuc 0i-TD, 2011
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Yama Seiki
Model: GLS-2000
Year: 2011
Make: Yama Seiki, Model: GLS-2000, Year: 2011, Machine Location: Missouri, Max Turning Diameter: 16.9″, Max Turning Length: 13.0″, Max Bar Capacity: 2.56″, Swing Over Bed: 22.05″, Distance Between Centers: 22.6”, Travel:, X Axis Travel: 9.1″, Z Axis Travel: 13.2″, Rapid ...more
Yama Seiki #GLS-2000, 22" swing, 8" chuck, 2.5" bar, 15.35" turn diameter, 12.9" turn length, Fanuc Oi-TD, 2011
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Yama Seiki
Model: GLS-2000
Year: 2011
Max Swing 22.05 inches Swing Over Saddle 9.06 inches Max Turning Diameter 15.35 inches Max Turning Length 12.99 inches Chuck Size 8 inches Hole Through Spindle 2.99 inches Bar Capacity 2.56 inches Spindle Speed 20 4,500 RPM Spindle Nose A2-6 Spindle Motor 25 HP peak (15 HP continuous) Turret Stations 10 CNC Control ...more
JUST ADDED!
Yama Seiki #GLS-2000LM, CNC Lathe, 3-Axis, 22" Swing, 20.8" Machining length, 8" Chuck, 2" Bar, 16.93" Turning diameter, 20 HP, 4200 RPM, 12 Turret capacity, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GLS-2000LM
Year: 2018
Used CNC Lathe, featuring live milling and FANUC control. Enjoy 90" X-axis travel, 13" Z-axis, 3" spindle bore, A2-6 spindle nose, 4,200 RPM, and 12 turret capacity., X-AXIS TRAVEL 90", Z-AXIS TRAVEL 13", SPINDLE BORE 3", SPINDLE NOSE A2-6, SPINDLE SPEED 4,200 RPM, TURRET CAPACITY 12.
Yama Seiki #GLS-2000LM, cnc lathe, 16.9" diameter x 24.8" L turn, 2" bar, 3" bore, 20 HP, 4200 RPM, 12 turret, live mill, tailstock, tool preset, Chip Conv., 4005 Hrs, 2018
Clark Machinery Sales LLC | Hunt Valley, MD
Category: CNC Lathes and Turning Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Yama Seiki
Model: GLS-2000LM
Year: 2018
2018 YAMA SEIKI GLS-2000LM, SWING OVER SADDLE. 22", MAX CUTTING DIAMETER. 16.9", MAX CUTTING LENGTH. 24.8", X-AXIS TRAVEL. 90", Z-AXIS TRAVEL. 13", CHUCK SIZE. 8", BAR CAPACITY. 2", SPINDLE BORE. 3", SPINDLE NOSE. A2-6, SPINDLE MOTOR. 20 hp, SPINDLE SPEED. 4,200 RPM, TURRET CAPACITY. 12, LIVE MILLING. Yes, Dimensions. ...more
JUST ADDED!
Yama Seiki #GLS-2000LYS, CNC Lathe, 22" Swing, 8" Chuck, 2.5" Bar, 16.9" diameter x 24.8" L Turning Size, 25 HP, 4500 RPM, 12-Station Turret, 2016
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GLS-2000LYS
Year: 2016
Used CNC Lathe available. s include Max Turning 16.9"x24.8", 2.56" Bar Capacity, 25 HP Motor, Fanuc 31i Control, and Live Milling, Y-Axis, Sub Spindle, and Chip Conveyor., Max. Turning Diameter: 16.9, Max. Turning Length: 24.8, Max. Bar Capacity: 2.56, Swing Over Bed: 22.05, Chuck Size: 8, Spindle Nose: A2-6, Spindle ...more
JUST ADDED!
Yama Seiki #GLS-2000LYS, CNC Lathe, 4-Axis, 22" Swing, 8" Chuck, 2.6" Bar, 16.9" Turning diameter, 15 HP, 4200 RPM, 2015
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GLS-2000LYS
Year: 2015
2015 YAMA SEIKI GLS-2000LYS CNC Lathe, 4-axis, 8" chuck, 22" swing, 2.56" bar capacity, 15 hp, 4,200 RPM max, 16.9" turning diameter. live tooling and sub spindle. No tailstock., 2015 YAMA SEIKI GLS-2000LYS, Swing. 22", # Axis. 4, Chuck Size. 8", Bar Capacity. 2.56", Power. 15 hp, Max RPM. 4,200 RPM, Turning Dia. ...more
Yama Seiki #GLS-2000LYS, Multi-axis CNC Lathe, 22" swing, 4500 RPM, 12 tool, Fanuc 31i, 16.9" diameter x 24.8" L max, 8" chuck, Chip Conv., 2016
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Yama Seiki
Model: GLS-2000LYS
Year: 2016
Make: Yama Seiki, Model: GLS-2000LYS, Year: 2016, Machine Location: Upon Request, Max. Turning Diameter: 16.9″, Max. Turning Length: 24.8″, Max. Bar Capacity: 2.56″, Swing Over Bed: 22.05″, Chuck Size: 8″, Spindle Nose: A2-6, Spindle Speed: 4,500 RPM, Sub Spindle Speed: 6,000 RPM, Spindle ...more
Yama Seiki #GS-200Y, CNC turning center, 18.5" swing, 2" bar, 13.38"dia., 23.62"lgth, Fanuc 18i-TB, Hydrobar bar feeder, C-Axis, live tool, Y-Axis, rigid tap, 2008
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Yama Seiki
Model: GS-200Y
Year: 2008
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, 3,974 Hours Cutting ...more
Yama Seiki #GS-200Y, 8" chuck, 2" bar, 13.38" diameter, 23.6" length, Fanu 18i-TB, 12 tools, 4800 RPM, 20 HP, Y-Axis live tool, parts catcher, tailstock, chip conveyor, barfeed interface, 2008
Champion Machinery Inc | Fort Mill, SC
Category: CNC Lathes and Turning Centers
Seller: Champion Machinery Inc
Location: Fort Mill, SC
Mfr: Yama Seiki
Model: GS-200Y
Year: 2008
, Chuck Size 8", Max Diameter Bar Capacity 2", Spindle Motor 20 / 15 HP AC, Spindle Speed 4800 RPM, Spindle Nose A2-6, Tools 12, X-Axis Travel 10.61", Z-Axis Travel 23.6", Y-Axis Travel 4.72", Machine Dimensions (L x D x H) 106" x 77" x 75", Machine Weight 11,000 lbs., Max Turning Diameter 13.38", Max Turning Length ...more
Yama Seiki #GS-460L, 29" swing x 79" CC, 8" spindle bore, 24" chuck, Fanuc Oi, 50 HP, 12 station turret
HTR Global Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Yama Seiki
Model: GS-460L
Year: 2006
YAMA SEIKI GS 460L CNC LATHE, Model GS 460 L, Serial number 91C012, Year of manufacture 02/2006, CNC control Fanuc Oi-TC, Maximum swing 29”, Swing over saddle 28”, Maximum turning diameter 24”, Standard turning diameter 22”, Center distance 79”, Spindle bore 8”, Spindle nose A-2-15 ...more
Yama Seiki #GS-460L, CNC lathe, Fanuc 0iTC, 29" swing, 79" centers, 3-jaw 24" chuck, tailstock, 2006
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Yama Seiki
Model: GS-460L
Year: 2006
YAMA SEIKI GS460L CNC LATHE, CNC control Fanuc Oi-TC, Maximum swing 29”, Swing over saddle 28”, Maximum turning diameter 24”, Standard turning diameter 22”, Center distance 79”, Spindle bore 8”, Spindle nose A-2-15, Chuck SMW Autoblok 24” 3-jaw hydraulic, 10” bore, Main ...more
JUST ADDED!
Yama Seiki #GS-460L, CNC Lathe, 30.7" Swing, 24" Chuck, 50 HP, 700 RPM, 10-Station Turret, Chip Conveyor, 2006
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GS-460L
Year: 2006
Used Multi-Axis CNC Lathe, Fanuc Oi-TC CNC Control, 24" 3-Jaw Hydraulic Chuck, heavy-duty tailstock, chip conveyor, and coolant system. s 79" Z-axis travel, spindle speed 700 RPM, ATC with 10 stations., Swing Over Bed: 30.7, Swing Over Cross Slide: 23.6, Distance Between Centers: 79, Spindle Bore: 8.1, Spindle Speed: ...more
JUST ADDED!
Yama Seiki #GTW-1500Y, CNC Lathe, 15.7" swing, 9.8" turning diameter, 8.2" machining length, 6" chuck, 25 HP, 5000 RPM, Fanuc 32i CNC, 2017
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GTW-1500Y
Year: 2017
CNC Lathe, used, s a 15.7" swing, 8.2" machining length, and 6" chuck. Y-axis live tooling, sub-spindle, Fanuc 32i CNC control, parts catcher, conveyor, barfeed, and gang tooling. Max RPM: 5,000., 2017 YAMA SEIKI GTW-1500Y, Swing. 15.7", Machining Length. 8.2", Chuck Size. 6", Bar Capacity. 2", Power. 25 hp, Max RPM. ...more
JUST ADDED!
Yama Seiki #GTW-1500Y, CNC Lathe, 4-Axis, 15.7" Swing, 2" Bar, 25 HP, 6000 RPM, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Yama Seiki
Model: GTW-1500Y
Year: 2018
Used CNC Lathe. s 15.7" swing, 4-axis, 25 hp, and up to 6,000 RPM. Includes live tooling, sub spindle, bar feeder, toolbox, parts catcher, and conveyor., 2018 YAMA SEIKI GTW-1500Y, Swing. 15.7", # Axis. 4, Bar Capacity. 2", Power. 25 hp, Max RPM. 6,000 RPM, Tailstock. No, Live Tooling. Yes, Sub Spindle. Yes, Live ...more
Yama Seiki #GTW-1500Y, multi-axis CNC turning center, Fanuc 32i, turret / gang tooling, 2016
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Yama Seiki
Model: GTW-1500Y
Year: 2016
Yama Seiki GTW1500Y Turret / Gang Tooling Multi-Axis CNC Turning Center, (subject to buyer verification):, Capacity, Max. Turning Diameter Live Tooling Turret + Y-axis : 9.84”, Standard Turning Diameter Live Tooling Turret : 9.05”, Max. Turning Length 8.26”, Main Spindle, Bar Capacity 2” (Main ...more
