For Sale by Smith Machinery Co
Surplus Record Dealer Since 2001
Location: Ames, IA
Contact Jim Smith
Phone Number: 515...> Show Phone Number 515-233-6330
Let the seller know you found their listing on Surplus Record!
Description
Specifications
Equipped With
Equipped With
Equipped With
Equipped With
SPECIFICATIONS:CAPACITY:
MAX. SWING DIAMETER ------------------- 18.11 in
SWING OVER SADDLE --------------------- 14.96 in
MAX. TURNING DIAMETER ----------------- 12.59 in
MAX. TURNING LENGTH ------------------- 19.68 in
CHUCK SIZE ---------------------------- 8 in
BAR CAPACITY -------------------------- 2 in
SPINDLE:
HOLE THROUGH DRAW TUBE ---------------- 2.05 in
HOLE THROUGH SPINDLE ------------------ 2.59 in
SPINDLE BEARING DIAMETER -------------- 3.93 in
HYDRAULIC CYLINDER -------------------- 8 in
SPINDLE NOSE -------------------------- A2-6
SPINDLE MOTOR TYPE -------------------- FANUC
MOTOR OUTPUT (30 MIN.) ---------------- 15 HP
MOTOR OUTPUT (PEAK) ------------------- 20 HP
MOTOR BASE SPEED ---------------------- 1,500 RPM
SPINDLE DRIVE SYSTEM ------------------ DIRECT BELT DRIVE
SPINDLE DRIVE RATIO ------------------- 7:10
SPINDLE SPEED RANGE ------------------- 42 - 4,200 RPM
SPINDLE FULL OUTPUT SPEED ------------- 1,050 RPM
SPINDLE TORQUE (30 MIN) --------------- 74 FT/LBS.
SPINDLE TORQUE (PEAK) ----------------- 100 FT/LBS.
X & Z AXES:
X/Z AXES TRAVELS ---------------------- 7.08 in /20.47 in
X/Z AXES RAPIDS ----------------------- 945 IPM/1,181 IPM
SLIDE WAY TYPE ------------------------ NSK LINEAR WAYS
FEED RATES ---------------------------- 1 - 189 IPM
X AXIS SERVO MOTOR -------------------- AC 2.2 HP
Z AXIS SERVO MOTOR -------------------- AC 2.2 HP
X AXIS BALL SCREW DIA/PITCH ----------- 1.26 in /PITCH 10
Z AXIS BALL SCREW DIA/PITCH ----------- 1.26 in /PITCH 10
X/Z AXES THRUST (CONT.) --------------- 1,133 LBS
LIVE TOOLING TURRET:
STATIONS ------------------------------ 12
INDEXING DRIVE ------------------------ SERVO MOTOR
INDEXING SPEED ------------------------ 0.3 SEC. SINGLE STEP
OD TOOL SHANK SIZE -------------------- 3/4 in
ID TOOL SHANK SIZE -------------------- UP TO 1 in DIA.
LIVE TOOLING -------------------------- 5 HP
LIVE TOOLING SHANK SIZE --------------- 0.04 in - 0.51 in ER 20
LIVE TOOLING RPM ---------------------- 65 - 3,600 RPM
TAILSTOCK:
QUILL CENTER TAPER -------------------- MT #4 LIVE CENTER
QUILL DIAMETER/TRAVEL ----------------- 2.75 in DIA./5.90 in
TAILSTOCK BASE TRAVEL ----------------- 11.42 in
PROGRAMMABLE QUILL/BASE --------------- YES/YES (OPTIONAL)
PARTS CATCHER (OPTIONAL):
MAX. PART DIAMETER -------------------- 2.36 in
MAX. PART LENGTH ---------------------- 7.09 in
GENERAL:
POSITIONING ACCURACY ------------------ 0.0002 in
REPEATABILITY ------------------------- 0.0001 in
STANDARD CNC CONTROL ------------------ FANUC Oi-T
VOLTAGE/POWER REQUIREMENT ------------- AC 200/220/3/60, 25 KVA
HYDRAULIC TANK CAPACITY --------------- 13 GAL.
COOLANT TANK CAPACITY ----------------- 40 GAL.
COOLANT PUMP -------------------------- 3/4 HP GRUNDFOS CH-2/30 RATED AT 55 PSI
MACHINE WEIGHT ------------------------ 7,050 LBS.
DIMENSIONS (L X W X H) ---------------- 83 in X 65 in X 68 in
MACHINE LENGTH WITH CHIP CONVEYOR ----- 117 in FEATURES:- FANUC Oi-TC CONTROL WITH 8.4 in COLOR LCD
- PROGRAMMABLE TAILSTOCK QUILL
- HPMA TOOL SETTER
- NSK LINEAR WAYS
- CHIP CONVEYOR & CART
- STANDARD TOOL HOLDER AND SLEEVES PACKAGE
EQUIPPED WITH:- (2) X-AXIS DIRECTION LIVE TOOLING TOOL HOLDER
- (2) Z-AXIS DIRECTION LIVE TOOLING TOOL HOLDERMACHINE WILL BE WILL BE WARRANTIED FOR 1 YEAR PARTS AND LABOR
CONTROL WILL HAVE A FULL FANUC WARRANTY FOR 2 YEARSOPTIONAL FEATURES:PARTS CATCHER ------------------------------ $2,800.00
BAR FEED INTERFACE ------------------------- $625.00
X-AXIS DIRECTION LIVE TOOL HOLDER ---------- $1,299.00
Z-AXIS DIRECTION LIVE TOOL HOLDER ---------- $2,399.00
DELIVERY: IMMEDIATE
MAX. SWING DIAMETER ------------------- 18.11 in
SWING OVER SADDLE --------------------- 14.96 in
MAX. TURNING DIAMETER ----------------- 12.59 in
MAX. TURNING LENGTH ------------------- 19.68 in
CHUCK SIZE ---------------------------- 8 in
BAR CAPACITY -------------------------- 2 in
SPINDLE:
HOLE THROUGH DRAW TUBE ---------------- 2.05 in
HOLE THROUGH SPINDLE ------------------ 2.59 in
SPINDLE BEARING DIAMETER -------------- 3.93 in
HYDRAULIC CYLINDER -------------------- 8 in
SPINDLE NOSE -------------------------- A2-6
SPINDLE MOTOR TYPE -------------------- FANUC
MOTOR OUTPUT (30 MIN.) ---------------- 15 HP
MOTOR OUTPUT (PEAK) ------------------- 20 HP
MOTOR BASE SPEED ---------------------- 1,500 RPM
SPINDLE DRIVE SYSTEM ------------------ DIRECT BELT DRIVE
SPINDLE DRIVE RATIO ------------------- 7:10
SPINDLE SPEED RANGE ------------------- 42 - 4,200 RPM
SPINDLE FULL OUTPUT SPEED ------------- 1,050 RPM
SPINDLE TORQUE (30 MIN) --------------- 74 FT/LBS.
SPINDLE TORQUE (PEAK) ----------------- 100 FT/LBS.
X & Z AXES:
X/Z AXES TRAVELS ---------------------- 7.08 in /20.47 in
X/Z AXES RAPIDS ----------------------- 945 IPM/1,181 IPM
SLIDE WAY TYPE ------------------------ NSK LINEAR WAYS
FEED RATES ---------------------------- 1 - 189 IPM
X AXIS SERVO MOTOR -------------------- AC 2.2 HP
Z AXIS SERVO MOTOR -------------------- AC 2.2 HP
X AXIS BALL SCREW DIA/PITCH ----------- 1.26 in /PITCH 10
Z AXIS BALL SCREW DIA/PITCH ----------- 1.26 in /PITCH 10
X/Z AXES THRUST (CONT.) --------------- 1,133 LBS
LIVE TOOLING TURRET:
STATIONS ------------------------------ 12
INDEXING DRIVE ------------------------ SERVO MOTOR
INDEXING SPEED ------------------------ 0.3 SEC. SINGLE STEP
OD TOOL SHANK SIZE -------------------- 3/4 in
ID TOOL SHANK SIZE -------------------- UP TO 1 in DIA.
LIVE TOOLING -------------------------- 5 HP
LIVE TOOLING SHANK SIZE --------------- 0.04 in - 0.51 in ER 20
LIVE TOOLING RPM ---------------------- 65 - 3,600 RPM
TAILSTOCK:
QUILL CENTER TAPER -------------------- MT #4 LIVE CENTER
QUILL DIAMETER/TRAVEL ----------------- 2.75 in DIA./5.90 in
TAILSTOCK BASE TRAVEL ----------------- 11.42 in
PROGRAMMABLE QUILL/BASE --------------- YES/YES (OPTIONAL)
PARTS CATCHER (OPTIONAL):
MAX. PART DIAMETER -------------------- 2.36 in
MAX. PART LENGTH ---------------------- 7.09 in
GENERAL:
POSITIONING ACCURACY ------------------ 0.0002 in
REPEATABILITY ------------------------- 0.0001 in
STANDARD CNC CONTROL ------------------ FANUC Oi-T
VOLTAGE/POWER REQUIREMENT ------------- AC 200/220/3/60, 25 KVA
HYDRAULIC TANK CAPACITY --------------- 13 GAL.
COOLANT TANK CAPACITY ----------------- 40 GAL.
COOLANT PUMP -------------------------- 3/4 HP GRUNDFOS CH-2/30 RATED AT 55 PSI
MACHINE WEIGHT ------------------------ 7,050 LBS.
DIMENSIONS (L X W X H) ---------------- 83 in X 65 in X 68 in
MACHINE LENGTH WITH CHIP CONVEYOR ----- 117 in FEATURES:- FANUC Oi-TC CONTROL WITH 8.4 in COLOR LCD
- PROGRAMMABLE TAILSTOCK QUILL
- HPMA TOOL SETTER
- NSK LINEAR WAYS
- CHIP CONVEYOR & CART
- STANDARD TOOL HOLDER AND SLEEVES PACKAGE
EQUIPPED WITH:- (2) X-AXIS DIRECTION LIVE TOOLING TOOL HOLDER
- (2) Z-AXIS DIRECTION LIVE TOOLING TOOL HOLDERMACHINE WILL BE WILL BE WARRANTIED FOR 1 YEAR PARTS AND LABOR
CONTROL WILL HAVE A FULL FANUC WARRANTY FOR 2 YEARSOPTIONAL FEATURES:PARTS CATCHER ------------------------------ $2,800.00
BAR FEED INTERFACE ------------------------- $625.00
X-AXIS DIRECTION LIVE TOOL HOLDER ---------- $1,299.00
Z-AXIS DIRECTION LIVE TOOL HOLDER ---------- $2,399.00
DELIVERY: IMMEDIATE
Get Your Price from Smith Machinery Co!
Buyers Who Viewed This Listing Also Viewed:
Daewoo Doosan #Lynx-200B, CNC Lathe, 18.1" swing, 10.2" turning diameter, 11.8" machining length, 8" chuck, 2" bar, 15 HP, 4500 RPM, Fanuc 21-T, 2000
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Daewoo Doosan
Model: LYNX-200B
Year: 2000
Used CNC Lathe for sale. s 18.11" swing, 11.8" machining length, 8.0" chuck, 2.0" bar capacity, 15.0 power, max RPM of 4500, and 10.2" turning diameter., SWING 18.11", MACHINING LENGTH 11.8", CHUCK SIZE 8", BAR CAPACITY 2", POWER 15 hp, MAX RPM 4,500 RPM, TURNING DIA 10.2".
JUST ADDED!
Mazak #QT-20N, CNC lathe, Mazatrol T-Plus conversational Control, 17.3" swing, 2" bar, 3-jaw 8" chuck, 1995
Category: CNC Lathes and Turning Centers
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Mazak
Model: QT-20N
Year: 1995
Maximum Swing 17.32", Maximum Turning Diameter 10.81", Maximum Shaft Length 20.08", Spindle Bore Diameter 2.44", Maximum Bar Capacity 2.04", Chuck Size 8", Spindle Speed Range 50-5000 RPM, Turret Tools 8 Position, X-Axis Travel 7.09", Z-Axis Travel 20.08", Rapid Traverse X-Axis / Z-Axis 1200 / 1300 IPM, Tailstock ...more
Okuma #Genos-L250e, CNC lathe, OSP-P300L-R Control, 17.7" swing, 2" bar, 8" chuck, 12 station turret, 2015
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: GENOS-L-250E
Year: 2015
Okuma Genos L-250E CNC Lathe (subject to buyer verification):Swing Over Bed17.72”Swing Over Saddle11.81”Max. Turning Diameter11.02”Max Mach Length19.69”X Axis Travel.79” + 5.51”Z Axis Travel20.47”Rapid Traverse Rated 787 / 984 IPMSpindle Speed75 ~ 3000 RPMSpindle NoseA2 ...more
Bridgeport Romi #EZ-Path-SD, CNC lathe, 18" swing, 8" chuck, 3-jaw, 2" bar, 40" centers, Bridgeport BPCT, inch/metric, tailstock
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Romi
Model: EZ-PATH-SD
Spec Sheet:, BRIDGEPORT ROMI EZ PATH SD CNC LATHE, Bridgeport BPCT CNC Control, Dual Electronic Handwheel Controls, Teach Mode, Inch/Metric Threading, 8 3-Jaw Chuck, Manual Tailstock, Geared Headstock, Central Automatic Lube System, Coolant System w/ Chip Pan., CATALOG :, Max Swing Over Ways 18, Max Swing Over Cross ...more
Okuma #Genos-L2000-e, CNC lathe, 17.7" swing, 8" chuck, 3-jaw, 2" bar, 40" centers, 9.06" dia., 19.69" lgth, 12 turret, A2-6, OSP-P300LA, tailstock, 2020
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Okuma
Model: GENOS-L2000-E
Year: 2020
, X-TRAVEL: 6.50", Z-TRAVEL: 18.50", DISTANCE BETWEEN CENTERS: 20", MAX SWING OVER BED: 17.72", MAX TURNING / CUTTING LENGTH: 19.69", MAX CUTTING / TURNING DIAMETER: 9.06", SPINDLE-, BAR CAPACITY: 2.00", SPINDLE BORE: 2.44", SPINDLE SPEED: 5,000 RPM, SPINDLE MOTOR: 20 HP, SPINDLE NOSE: A2-6, TURRET: 12 POSITION.
