Buy or Sell Your 500 Ton Press Brake

7' (84") x 1/2" CTL line Shear, Contact Galaxie, Call +1 (734) 727-0600 or send us an email., Serial number 11660 35 5 80, Double Crank Design, Single Rake, Pinch Roll Hold Down for Strip Guidance, Air Clutch and Brake, Spare Blades.

Maximum bend length: 78.8", Press Capacity: 50 US tons, Vertical stroke of lower beam: 3.937", Between Housings: 59.9", Throat: 15.76", Stroke: 3.94", Open Height: 14.58", Hydraulic Capacity: 13.46 gallons, Rising speed of lower beam (in. /sec) at 60Hz: 2.323", Bending speed of lower beam (in. /sec) at 60Hz: 0.433" ...more

MODEL #: 810L, SERIAL #: L16104, 10' OVERALL BED LENGTH, 8'6" DISTANCE BETWEEN HOUSINGS, AIR CLUTCH & BRAKE, FOOT PEDAL, INCH / SINGLE / CONTINUOUS MODES, E-STOP, UPPER AND LOWER DIE HOLDERS, DRC BACK GAUGE, GOOD CONDITION.

Chicago Dreis & Krump 4′ 11″ x 45 Ton Hydraulic Press Brake, HPB 4015, Inventory # 9850, Model: HPB 4015, Max. Length: 4′ 11″, Tonnage: 45 Tons, Between Housings: 3′ 9″, Open Height: 12″, Stroke: 6″, Throat Depth: 12″, Advance Speed: 240 IPM, Press Speed: 24 ...more

Pre Owned Toyokoki HYB-60-20 CNC Hydraulic Press Brake, Capacity 72 Tons, Overall Length of Bed & Ram 78.74”, Distance Between Housings 66.3”, Open Height 11.4”, Stroke 5.9”, Throat 16.14”, Working Height 35”, Back Gauge Range, Speeds, Rapid Approach 22 - 4.2” Per Sec ...more

SERIAL. 51353, MODEL. E-75, CAPACITY. 75 TON, STROKE. 6", SHUT HEIGHT. 18", ADJUSTMENT. 4", SPEED. 30 TO 60 SPM VARIABLE, BED AREA. 36" X 24", SLIDE AREA. 24" X 18", AIR CLUTCH & BRAKE.

Tonnage 200, Stroke 9.84 inches, Shut Height 18.90 inches, Adjustment 4.72 inches, Bed Size 57.09" x 33.5", Ram Area 33.5" x 25.6", SPM 25-50 VSPM, Standard, Used Komatsu Press Model# OBS 200-2, Gap Frame Press, 200 ton Capacity Metric, 220 ton US Ton Capacity, 9.84" Stroke, 18.9" Shut Height on Bolster, 23.4" Shut ...more

Make: Graham Best, Model: C200-12, Year: 1985, Machine Location: Texas, Tonnage: 200 Tons, Bed Length: 12′, Distance Between Housings: Approx. 120″ – 126″, Shut Height: 14″ – 18″ (without ram adjustment), Ram Adjustment: 3″ – 4″, Throat Depth: 8″ ...more

, 2010 Betenbender 6-70T Hydraulic Press Brake, 70-ton, 6' length, used with minimal hours. s include a 4-way die, punch, multi-switch control panel, adjustable backgauge, and digital readout. Durable all-steel construction, ideal for precision work., Spec Sheet:, 70 Ton Betenbender 6-70T Hydraulic Press Brake w/4 ...more

Braking Capacity: 35 Ton. Stroke: 2". Bed Length: 72" (open ended). Material Capacity: 14 Gauge. Motor: 3 HP / 1750 RPM. SPM (Variable): 6 - 18 / 24..

-Tonnage: 500 tons, -Bed Size: 186'' x 108'', -AFCO Feedline: 72’’ x 75,000 lb, -AFCO Washer: 72’’ Wide, -ECI Oiler: 72’’ Wide, Press, -Model: S4-500-186-108, -Stroke: 12’’, -Shut Height: 48’’, -Adjustment: 20’’, -SPM: 10-50 ...more

We are pleased to offer for your consideration:, (1) 400 ton Chicago Hydraulic Press Brake, Stock Number: 13902, List Price: On Request, Manufacturer: Chicago, Model Number: 400-H-10, Year: 1961, Tonnage: 400, Overall bending length: 14', Distance between housings: 10' 6", Capacity with 4" die opening: 10' x 1/2" mild ...more

S/N 46156 8” stroke 24” Shut Height 6” Ram Adjustment 58 x 34 Bed 36 x 28 Ram Air clutch and Brake Air counterbalance.

ACCURL (USED) GENIUS PRO B32135, HYDRAULIC CNC PRESS BRAKE, 151.8 US TON MAX PRESS FORCE, 125.98" WORKING LENGTH, 7.87" MAX STROKE, 472.4 IPM RAPID APPROACH, 23 IPM WORKING SPEED, 354.3 IPM RETURN SPEED, 15 HP MAIN MOTOR, DELEM DA-66T CONTROL, 79.3 OIL TANK CAPACITY, 280 BAR HYDRAULIC MAX, OPERATING ...more

ACCURPRESS HYDRAULIC PRESS BRAKE, MODEL: 710012, SERIAL NUMBER: 2110, Capacity: 100 Tons, Overall Die Length: 12', Distance Between Housings: 10'6-1/2", Stroke, Adjustable: 8", Open Height: 14", Closed Height: 6", Throat Depth: 8", Ram Speed, Approach: 130 IPM, Ram Speed, Work: 20 IPM, Ram Speed, Return: 260 ...more

TONNAGE.: 5,000, STROKE.: 72", DAYLIGHT.: 96", SHUT-HEIGHT.: 24", BED SIZE.: 103" L-R X 80" F-B, PLATENS.: 96" X 96", FAST ADVANCE SPEED.: 75"/MIN, PRESSING SPEED ADJUSTABLE.: 1 TO 55"/MIN, FAST RETURN SPEED.: 46"/MIN, Machine Type.Forging Presses Manufacturer.VERSON Model.N/A Year.N/A Condition.Used.

, Tonnage 500 Ton, Year model 2016, Make Arburg, Model Allrounder 920 H 4600-1300, Shot Size (Oz) 21.72 Oz, Screw Diameter 60 mm, Tie Bar Spacing 36.22" x 36.22", Platen Size 50.39" x 50.39", Max Daylight 72.83", Hours 3,200, Controls Selogica, Voltage 460v, Operational Conditions Excellent. Like new., Machine in ...more

MACHINE, Tonnage: 100, Length: 10', Control: Amada, Max Stroke: 7.8" (200 mm), Weight: 15,000 LBS (6750 Kg), 3 Phase:, 230/460 V:, 60 Hz.

Tonnage 100 tons Hyd/Mech hydraulic Punching 66 BH (Distance Between Housings) 8' 5" Bed/Ram Length 10 feet Weight 19000 pounds Throat Depth 6 inches Ram Stroke (Fully Adjustable) 6 inches Open Height 13 inches Closed Height 7 inches Overall Dimensions 11" W x 5' Deep x 9 1/2' Tall (Approx.), NO DIE RAIL ...more

150/110 TON BLISS (NEW 1981) MODEL #3-3/4-B DOUBLE ACTION TOGGLE PRESS, SERIAL. HP52840, MODEL. 3-3/4 B, YEAR. 1981, SLIDE PLUNGER CAPACITY. 150 TON, BLANKHOLDER CAPACITY. 110 TON, SLIDE PLUNGER STROKE. 20", SLIDE PLUNGER SHUT HEIGHT. 22 to 26", BLANKHOLDER STROKE. 11-1/2", BLANKHOLDER SHUT HEIGHT. 20" to 24" ...more

SERIAL. 1800, MODEL. 710012, YEAR NEW. 1991, CAPACITY. 100 TON, LENGTH OF BED AND RAM. 12', DISTANCE BETWEEN HOUSINGS. 10'6", BED HEIGHT. 34", STROKE. 8", OPEN HEIGHT. 16", CLOSED HEIGHT. 8", STROKES PER MINUTE. 13 @ FULL STROKE, THROAT. 10", RAM SPEED (FAST APPROACH). 115 IPM, RAM SPEED (SLOW BEND). 24 IPM ...more

150 Ton, PRESSMASTER, MODEL GSP-150T / 68, Year of MFG. 2015, 12" Stroke of Ram, 72" x 96" Bed, Travelling Column, Fully adjustable Straightening Press, Tonnage 150 T 136.078 t Dimensions 102" L x 132" W x 80" H 102" L x 132" W x 80" H Weight 16000 16000 MOEL: GSP-150T / 68, RATED ...more

Stock # 102168, Condition Used, Tonnage 300 tons Stroke 12 inches Shut Height 25.25 inches SPM 18 Vari Speed (Yes/No) no Bed W 102 inches Bed L 48 inches Model: #300-48-102 Capacity: 300 Ton Stroke Of Slide: 12" Power Slide Adjustment: 6" Shut Height, SDAU: 24-1/4" Area Of Ram T Slotted Ram: 102" X 48" Windows: 26" ...more

MINSTER E2-300 SSDC PRESS, S/N 17392, STOCK# 14146J, MODEL E2-300, S/N 17392, 300 TON, STROKE 8", RAM ADJUSTMENT 6", SHUT HEIGHT 29", BED AREA 72"X L-R X 42" F-B, T-SLOTTED, T-SLOTTED BOLSTER, SPEED 40-80 SPM, SCRAP CONVEYOR (MISSING MOTOR), WORK PLATFORM, AIR CLUTCH & BRAKE, AIR COUNTERBALANCES, VIBRATION PADS ...more

Niagara OBI Press, Model A-4, Tonnage 60, SPM 90, Stroke 4.5", Shut Height 13.5", Adjustment 3", Bed Area 32" x 31", Ram 14" x 15.75", Fly Wheel Design, Palm Buttons, Air Clutch and Brake, Wintriss Clutch/Brake Control, Maxi-Monitor, -In Storage: Toledo, OH.

SERIAL. #51675, MODEL. HD 175-8-10, YEAR NEW. 1981, CAPACITY. 175 TON, OVERALL LENGTH. 10', DISTANCE BETWEEN HOUSINGS. 8'6", STROKE. 5", SHUT HEIGHT ADJUSTMENT. 12" TO 5", OPEN HEIGHT. 17", CLOSED HEIGHT. 7", RAM SPEED. 130 IPM RAPID, RAM SPEED. 65 IPM SLOW, RAM SPEED. 21 IPM PRESSING, RAM SPEED. 130 IPM ...more

Tonnage 325 tons Punching 230 BH (Distance Between Housings) 12' 5" Bed/Ram Length 14 feet Below Grade no Weight 52000 pounds Top Bed Width 38 inches Bed Width 12 inches Throat Depth 10 inches Ram Stroke (Fully Adjustable) 8 inches Open Height 16 inches Closed Height 8 inches Horsepower 30 Ram Speeds (In Inches ...more

, 1999 500 Ton Toshiba ISGS500V10-27AT:, Shot size: 48 Oz, Tie bar spacing: 34.3" x 31.9", Platen Size: 45.27" x 45.27", Max. Open daylight: 55", Control: V10, 460 volts., Condition: Good running conditions., 2 Identical machines available., Located in Kentucky., Imperial Metric Tonnage 500 T 453.593 t Shot Size 48 oz ...more

90 Ton X 8’ CNC Hydraulic Press Brake with Updated Cincinnati Touchscreen Controller, Transducer Positioned Feedback, Narrow Filler Block, Electric Foot Switch, Palm Button Station, Manuals and Clevis Self Aligning Cylinders., Tonnage: 90, Length of Bed & Ram: 8’, Distance Between Housings: ...more

Year: 1992, Make: Amada, Model: RG-100, Tonnage: 110 Tons, Overall Length: 122", Between Housing: 100.5", Stroke: 3.937", Open Height: 14.58", Throat Depth: 15.75", Weight: 14,100lbs, Dimensions: 11' x 6.5' x 9'H, NC9-EX II, Foot Pedal, Misc Punch Holders, 4 Finger Assemblies ...more

MODEL #: 45G, SERIAL #: PN0168, 3" STROKE, 11" SHUT HEIGHT, 2.5" RAM ADJUSTMENT, 68 SPM, 28" x 18" BED, 17" x 13" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, INCH SINGLE AND CONTINUOUS MODES, YEAR: 2000, GOOD CONDITION.

CAPACITY 60 TONS, STROKE 3", SHUT HEIGHT TO BED 14", RAM ADJUSTMENT 4" motorized, BED AREA 49" X 20" (RL X FB), BOLSTER PLATE 49" X 20" (RL X FB) X 2.5" THICK WITH 40" X 10" HOLE IN CENTER, RAM AREA 43" X 18" (RL X FB), SPEED 67-200 SPM, DISTANCE BETWEEN UPRIGHTS 36.75", FLOOR TO BED HEIGHT 34", THROAT 16", PRESS ...more

HERE WE HAVE:, 120 TON 8’, 5 AXIS STRIPPIT LVD PRESS BRAKE, MAKE: STRIPPIT LVD, MODEL:120 BH 08 CAD-CNC, SERIAL NUMBER: 27488, NEW IN: 2000, – 24 HP MOTOR, – 271 IPM RETURN SPEED, – 28 IPM BENDING SPEED, – 307 IPM APPROACH SPEED, – 15.7″ STROKE LENGTH, – 15.7″ OPEN ...more

Overview, Type:Press BrakesManufacturer:ENERGY MISSIONModel:PBR 3040Status:For Sale, - The stable robust welded steel Frame made of ultrasonically and tensile tested IS 2062 plate as per guidelines of IMTMA standards, - Fast approach & fast return speed to save cycle time, slow pressing speed for better stroke ...more

SERIAL. P52856 MODEL. HBM 175-10-12 CAPACITY. 175 TON OVERALL LENGTH. 12' DISTANCE BETWEEN HOUSINGS. 10'6" STROKE. 10" OPEN HEIGHT. 17" CLOSED HEIGHT. 7" RAM SPEED, RAPID. 130 IPM RAM SPEED, APPROACH. 65 IPM RAM SPEED, PRESSING. 21 IPM RAM SPEED, RETURN. 130 IPM MILLED & DRILLED FOR ANGLES. YES FLOOR ...more

150 TON PRESSMASTER H-FRAME PRESS W/20 TON BROACHMODEL HFBP-150/20 XWMWH… NEW RATED CAPACITY, TONNAGE. 150STROKE. 16"BORE. 10"RAM SPEED (Inches/Minute) ADVANCE. 24RAM SPEED (Inches/Minute) PRESSING. 6RAM SPEED (Inches/Minute) RETURN. 28DISTANCE BETWEEN POSTS (RIGHT TO LEFT). 60"DISTANCE BETWEEN ...more

MODEL #: E-75, SERIAL #: 47509, 6" STROKE, 18" SHUT HEIGHT, 4" POWERED RAM ADJUSTMENT, 37" x 24.25" BED, 24" x 19.5" T-SLOTTED RAM, 2" T-SLOTTED BOLSTER, AIR CLUTCH & BRAKE, AIR COUNTERBALANCE, TRIAD BRAKE MONITOR, PALM BUTTONS, 90 SPM, MOTOR: 10 HP 230/460/3/60, 53" LR x 77" FB x 137" TALL, APPROXIMATE WEIGHT ...more

MANUFACTURER - BLISS (REBUILT BY MINSTER), TYPE - LINK DRIVE W/ HYDRAULIC OVERLOAD, SERIAL NUMBER - B1-30145-1, TONNAGE - 400 TON, TONNAGE 4" UP - 350 TON, TONANGE 1" UP - 400 TON, BED AREA - 48" X 42", STROKE - 28", SHUTHEIGHT - 54", WORK STROKE - 4", ADJUSTMENT- 10", SPM - 14 - 20, SLIDE VELOCITY - 50 FPM @ 4" UP ...more

SERIAL.P54200, MODEL.HBM175-12-14, YEAR NEW. 1995, CAPACITY. 175 TON, OVERALL LENGTH OF BED. 14', DISTANCE BETWEEN HOUSINGS. 12'6", STROKE. 10", OPEN HEIGHT. 17", CLOSED HEIGHT. 7", DEPTH OF THROAT. 7", HYDRAULIC DIE CLAMPING. YES, RAM SPEED RAPID ADVANCE. 127 IPM, RAM SPEED NORMAL PRESS. 64 IPM, RAM SPEED ...more

SERIAL. 44931, MODEL. M60, CAPACITY. 60 TON, STROKE. 6", SHUT HEIGHT. 18", ADJUSTMENT. 4", BED AREA. 32" X 21", RAM AREA. 21" X 16", SPEED. 90 SPM, AIR CLUTCH & BRAKE. YES, CONTROLS. YES.

UTUBE NUMBER: 4102, MANUFACTURER: RLM, Capacity: 150 Ton, Stroke: 2″, Shut Height: 17″ Minimum, Base to Press Bed: 52″, Post Diameter: 4.5″, Bed: 106″ x 71.5″, Ram Adjustment: 12″+, Distance Between Posts: 83.5″ x 46″, Motor: 40 HP, Upgraded Control Panel ...more

Tonnage 32 tons Stroke 2 inches Ram Adjustment 2.25" Shut Height 9.5 inches Bed Size 30" x 16" x 2.5" Thick Bolster / 24" x 15" Bed Ram Size 15" x 10.5" SPM 100-200 Air Clutch (Yes/No) yes Air Brake yes Dual Palm Buttons yes Type (BG, Double Action, FW) flywheel Crank (Single/Double) single Type of CNC Control Inch ...more

capacity 800 ton, stroke 8", MAX. SHUT HEIGHT TO BED 29-1/4" sdau, bed area 28" X 36" RL X FB (31" FLOOR TO BED), speed 25 spm, ram area 22" X 18" (RL X FB), ram adjustment 1/2", bolster size 5" x 28-1/4" rl x 36" fb, clutch minster air clutch and brake (relined), New flywheel bearings installed in 2020, electrics ...more

U.S. Industrial 8′ x 88 Ton CNC Hydraulic Press Brake, USHB88-8, Inventory # 6516, Model: USHB88-8, Working Pressure: 88 Tons, Working Length: Columns: 78.74″, Throat Depth: 9.84″, Ram Travel: 3.94″, Open Height: 13.78″, Ram Travel Adjustment: 2.76″, Approaching: 3.54″ ...more

Make: Platarg, Model: 312 ICOP, Condition: Used, Overall In Great Shape, Complete and in operation- Come check it out!, 12 Operation Eyelet Press, - Full set of bottom cams, - Cup Hold Down Assembly, -Includes a good transfer slide = not shown, if you need a picture we can get it., -Does not include the beading ...more

SERIAL. 20936, TYPE. 110 JS 10, YEAR NEW. 9/1993, CAPACITY. 110 TON, OVERALL LENGTH OF BED. 120", DISTANCE BETWEEN HOUSING. 100", STROKE. 5.12", OPEN HEIGHT. 12.5", CLOSED HEIGHT. 7.1", RAM ADJUSTMENT. 4.3", DEPTH OF THROAT. 7.8", FLOOR TO TOP OF BED. 36", WIDTH OF BED. 7", RAM SPEED APPROACH. 236 IPM, RAM SPEED ...more

Bending Capacity: 150 TonsOverall Length: 145" (Shorter/Longer Lengths Available)Distance Between Housings: 122"Stroke: 10" (Longer Stroke Available)Daylight: 18" (Larger Daylight Available)Throat Depth: 16" (Larger Throat Available)Approach Speed: 496 IPMWorking Speed: 39 IPMReturn Speed: 307 IPMOil Tank: 48 Gallons ...more

Bending Capacity: 110 Tons Overall Length: 102" (Shorter/Longer Lengths Available) Distance Between Housings: 84" Stroke: 10" (Longer Stroke Available) Daylight: 18" (Larger Daylight Available) Throat Depth: 16" (Larger Throat Available) Approach Speed: 472 IPM Working Speed: 39 IPM Return Speed: 319 IPM Oil Tank: 45 ...more