Buy or Sell Your Vertical Lathe

MODEL. 21 X 120, TYPE. 500 MT 2000 33173, SWING. 21", SWING OVER CROSS SLIDE. 12-1/2", CENTERS. 120", LENGTH OF GAP. 14", SPINDLE SPEEDS. (18) 16 TO 1250 RPM, SPINDLE HOLE. 4-1/8", THREADS. 1/4 TO 60 TPI, METRIC THREADS.50 TO 120 MM, TAPER ATTACHMENT. YES, THREAD DIAL. YES, COOLANT. YES, CHUCK. 16" 4 JAW, MOTOR. 10 HP.

4000 Gallon Vertical Poly Storage Tank, 11’ Tall, 8’6” Diameter, * We have 100’s of various size storage tanks available in poly, stainless steel and fiberglass, We have the largest supply of, used/refurbished powder coating equipment in the World!, If you have questions or need additional ...more

SERIAL. 6102, MODEL. 3VH, YEAR NEW. 1986, AREA OF TABLE. 9" X 42", SPINDLE SPEEDS (VARIABLE). 60 TO 4250 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 16", QUILL TRAVEL. 5", POWER LONGITUDINAL FEED. SERVO, POWER CROSS FEED. SERVO, DEPTH OF THROAT. ...more

15,000# x 48" C-Hook, -48" Long Arm, -Arm Dimensions: 9.5" Wide x 11" High rectangular Tubing, -24.5" Vertical Throat, -Overall Size: 59" L x 31" W x 57" High, -In Storage: Toledo, OH.

SERIAL. 4J4P7C-7, MODEL. 4, AREA OF TABLE. 86" X 20", SPINDLE SPEEDS. (24) 16 TO 1600 RPM, LONGITUDINAL & CROSS FEEDS. (32) 1/4 TO 60 IPM, VERTICAL FEEDS. (32) 1/16 TO 15 IPM, LONGITUDINAL TRAVEL. 42", CROSS TRAVEL. 14", VERTICAL KNEE TRAVEL. 20", CENTERLINE OF SPINDLE TO TABLE. 0" MIN TO 20" MAX, RAPID TRAVERSE. ...more

HOLZ-HER LYNX 7511 FT FLAT TABLE MACHINE (W/ATC/BORING): -- :5' x 10' Phenolic "MATRIX" table for "Nested Base" Manufacturing. -- Working Field: "X" Axis 120" (3,050 mm), "Y" axis 62" (1,575 mm), "Z" axis stroke is 16-1/2" (419 mm), max material thickness 7" (180 mm). -- Positioning Speed: "X" & "Y" Axis ...more

QuickTECH T8 Twin-Y Multi-Axis CNC Turning Center (subject to buyer verification):Main Spindle CapacitySwing over cross slide 11.8”Maximum bar working capacity 2.56” (65mm)Maximum turning length 13.8”Spindle nose A2-6Hole through draw tube 2.6” (66mm)Spindle speed range (std.) 4000 RPMSpindle ...more

6" X 12" MITSUI (NEW 2004) "HIGH-PRECISION" (MADE IN JAPAN) HAND FEED SURFACE GRINDER w/ROLLER BEARING TABLE MODEL: MSG-200MH… S/N: 20040110197… PG TECHNOLOGY MODEL #620 IN-PROCESS INSPECTION VISUAL GRIND SYSTEM (S/N: 721-0198 "The System 620 eliminates…lsquo;down ...more

Used Approximately 205 Gallon Stainless Steel Tank, Capacity: 205 gallons, Dimensions: 38" dia. x 42" straight side, Removable cone lid, flat bottom, _UNKNOWN_ 205 Gallon, Capacity. 205 gal, Diameter. 3.17', Height. 3.5', Type of stainless. Stainless Steel, Type Of Heads. Removable cone lid, flat bottom ...more

236" Distance between Centers| 3.5" through spindle| 4 Jaw Chuck, Poreba TRP 93 x 6M CNC Lathe (1998) is a heavy-duty horizontal engine lathe built for machining large, heavy workpieces with precision and power. Designed for both roughing and finishing operations, it is ideal for turning long shafts, rolls, and ...more

Manufacturer: Sunbeam, Type: Electric Temper Furnace, Working Dim’s: 36” wide x 72” deep x 36” high, Max Temp: 1150°F, Heated: Electric, Power: 480 Volts, 3-Phase, 60 HZ, Vertical rising pneumatic door, Controls: Free standing control panel with controls.

5-AXIS MACHINING CENTERS DECKEL MAHO DMU 60monoBLOCK SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One Used 2006 DMG MORI DECKEL MAHO DMU 60monoBLOCK FULL 5-AXIS UNIVERSAL MACHINING CENTER: Machine was manufactured in Pfronten, Germany Heidenhain iTNC530 CNC control with ...more

SERIAL. 12354, MODEL. 4010, CAPACITY. 40 TON, ANGLE IRON CAPACITY. 4"X 4" X 3/8", BENDING CAPACITY. 4" X 1" OR 6" X 1/2", ROUND BAR CAPACITY. 1-1/2" MAXIMUM, MACHINE CAN BE USE HORIZONTAL OR VERTICALLY, MOTOR HORSEPOWER. 3.

eBaySHIPPING IS AN ESTIMATE, WE ALSO HAVE A 35" 3 JAW.

(1) Used 10 Stand x 1-1/2" RLM Rollformer, Year:2001, Stands: 10, Spindle Diameter: 1-1/2", Roll Space: 12", Horizontal Centers: 12", Vertical Adjustment: 4"-7", Table to Center Bottom Spindle: 5-1/2", Year:2001, Stands: 10, Spindle Diameter: 1-1/2", Roll Space: 12", Horizontal Centers: 12", Vertical Adjustment: ...more

, 1500 Gallon Silvan Ind. Air Receiver Tank. Rated 150 PSI @ 450 Deg.F. 54" Dia. x 11'6" T/T. Approx 14'10" OAH. 6" Flange connections., 2008 SILVAN INDUSTRIES 1500 Gallon Air Receiver, Gallons. 1500 gal, PSIG. 150, ID - Inches. 54 in, Length. 11'6", Temp (F). 450, Material. Carbon Steel, Vert/Horiz. ...more

Subject to availability, and terms and conditions of FRANKE CNC sales agreement, we offer for your consideration: Used 2012 DMG MORI DECKEL MAHO DMU50 5-Axis Simultaneous VMC (NEW DMG Design): HISTORY Machine was built at DECKEL MAHO Seebach GmbH in Seebach, Germany in 2012 First installed new in the USA 1/2013 ...more

Used De Dietrich approximately 125 gallon glass lined tank. Rated 100 psi/full vacuum internal @ 500F. No jacket. Stainless steel top with half lid cover. Center bottom outlet. On wheels. National Board 861., 1998 DE DIETRICH 125 GALLON, Capacity. 125 gal, Internal Pressure. 100 psi, Internal Temperature. 500F ...more

Used Approximately 400 Gallon Stainless Steel Jacketed Tank, Manufacturer: Cherry-Burrell, Capacity: 40 gallons, National Board: 3542, Serial: 500-EP-84-2857, Year: 1985, Dimensions: 40" dia. x 72" straight side, Jacket pressure: 125 psi @ 350F, Multiple zone jacket, Flat top, flat bottom, 1985 CHERRY-BURRELL 400 ...more

Used Approximately 376 Gallon Stainless Steel Tank, Manufacturer: Winbco, Capacity: 376 gallons, Year: 2015, Dimensions: 48" dia. x 4' straight side, Material of construction: 304L stainless steel, Cone top, flat bottom, Additional dimensions: 3/16" wall thickness, mounted on legs, 2015 WINBCO 376 GALLON ...more

MACHINE #12324, -MANUFACTURER: FENN MANUFACTURING CO., -MODEL: 3P, -TYPE: HIGH SPEED PLAIN TYPE, -CAPACITY: FENN DOES NOT LIST A CAPACITY FOR THEIR "P", TYPE TURKSHEADS BECAUSE THEY ARE LY USED, FOR SHAPES. CAPACITY LISTED BELOW IS APPROXIMATED, FOR MILD STEEL FOR REFERENCE PURPOSES ONLY., -APPROXIMATE MAX ...more

Used Aronson 6x6 Welding Manipulator, Model: G6RA6CL-PK, Serial: 87534, 6' of Vertical Travel, 6' of Variable Speed Horizontal Travel, 400 Pound Boom Capacity, Free Standing X-Base, 120 Volt Input, Hand Pendant Controller, 30 Day Warranty.

Used Apache Approximately 7,250 Gallon Vertical Stainless Steel Mixing Tank, Flat top, cone bottom with several central bottom outlets, Lightnin Series 10 off-set bridge-mounted agitator drives with dual 3-blade pitch agitator, On (4) stainless steel legs, Size: 108" diameter X 174" straight side, Weighs approximately ...more

Chuck Dia.: 84 inches Spindle (Horz/Vert): No Attached Power: 200 horsepower Swing: 87 inches Under Wheel: 24 inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: 42 inches CNC Control: no Type of CNC Control: No Attached ...more

Spec Sheet:, The 2007 Clausing CSG-618ASD II is a precision 6" x 18" hydraulic surface grinder designed for high-accuracy grinding tasks. Based on technical data for the Clausing/Equiptop 618 series, the are as follows:, Capacity and Table, Table Size: 6" x 18" (152 x 460mm), Longitudinal Table Travel (Hydraulic): ...more

, Grundfos Vertical Stainless Steel In line pump. Type CRN8-80 U-P-G-AUUE. model B 42136068E P1 9649. Driven by 7.5 HP, 208-220/440 volt, 3450 RPM motor., GRUNDFOS B 42136068E P1 9649, GPM. 42, Type. Centrifugal, Horz/Vert. V, Material. Stainless Steel, Ft/Hd. 352.

MODEL. M1-1/2, STANDS. 8, ARBOR DIAMETER. 1.5", ROLL SPACE. 8", HORIZONTAL CENTERS. 11", LOWER SPINDLE TO BASE. 5-3/4", VERTICAL ADJUSTMENT. 4" TO 7", MOTOR. 10 HP.

26HD-48 Blanchard, 48" Magnetic Chuck, 23" Vertical, 56" Swing Inside Guards, 3000 LB Work Load, As Is., 26HD-48 BLANCHARD ROTARY SURFACE GRINDER, S/N B30-8-336, STANDARD, Magnetic chuck diameter………………………………………. ...more

Catalog :, 12” Screen10X LensManualX Travel (Horizontal) 6”Y Travel (Vertical) 2”Focus 1”, Location: Lake Forest.

Used FANUC R-2000IA/165F robot with RJ3 Controller, featuring 6-axis movement, 364 kg payload, and impressive reach—104.33" horizontal, 116.14" vertical. Ideal for versatile automation tasks., FANUC R-2000IA/165F, Weight. 2450 lb.

Chuck Diameter: 84"Swing Inside Guard 96"Vertical Travel 36"Chuck Life: 3/4"Table Load Capacity 12,000 LbsSegmented Wheel: 48"Table Speeds (4) 3 - 11.9 RPMPower Down Feed.004-.080 IPMGrinding Head Motor: 100 HP, Coolant Tank with Drag Conveyor.

CAM-WOOD BR 25 + 1 Horizontal and Vertical Drills & : The model BR-25+ 1 has the same s as the BR-25, except it's fitted with an additionaluniversal boring head, making it ideal for drilling holes on K/D furniture. -- The boring head can be swiveled 360 degrees for angular drilling, as desired -- Vercical ...more

NUMBER OF ANGLE PLATES. 2, WIDTH OF PLATE. 24", HEIGHT OF PLATE. 24", LENGTH OF BASE. 16", FACE THICKNESS. 2-1/4", T SLOTS VERTICALLY. 3, VERTICAL T SLOT CENTERS. 6", HORIZONTAL T SLOTS. 7, T SLOT CENTERS HORIZONTAL. 6", SLOT WIDTH AT TOP. 7/8", SLOT DEPTH. 1-1/4, T SLOT WIDTH AT BOTTOM. 1-1/2, CAST IRON. YES.

Used Greerco colloid mill, model W250V, stainless steel construction, vertical orientation, rated up to 25 gpm, jacketed grinding chamber, feed hopper with recirculation system on portable base with 2 hp, 220 volt, xp motor, serial# 3393632, built 1993.

SERIAL. 220504003, MODEL. 1632D, YEAR NEW. 2023, MAXIMUM SWING OVER BED. 14", SWING OVER CROSS SLIDE. 7-1/4", DISTANCE BETWEEN CENTERS. 30", SPINDLE SPEEDS. 25 TO 1600 RPM, HOLE THRU SPINDLE. 2-1/8", LONGITUDINAL FEEDS - ENGLISH. 06 TI -.1.80 IPR, THREADS ENGLISH. 1-3/4" TO 80 TPI, METRIC THREADS.025 TO 20 MMPR, CHUCK ...more

100kN Tinius Olsen H100KU Tensile & Compression Testing System, Tinius Olsen H100KU:Vertical Test Space(Less Tooling): 47”Horizontal Test Space: 25.6"Testing Stroke: 47”Testing Speed (IPM):.0004 - 20Load Frame Dimensions (W x D x H): 45" x 28" x 97"Weight (lbs.): 1,930Electrical Requirements: 230V ...more

FANUC R-2000iC/270F with R30iB PLUS Controls available as a used robotic solution. Known for precision and reliability, this model offers robust performance for industrial applications. Ideal for enhancing automation efficiency., Spec Sheet, 2021 FANUC R-2000iC/270F + R30iB PLUS, # Axis. 6, Payload. 562 lb, Vertical ...more

Stock #: 92693 Category: Vertical Motors HP: 300 RPM: 1790.00 Frame: 5807P Enclosure: TEFCBB Make: US Motors Volts: 460 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.

SERIAL. 002256, MODEL. BPV-1054, YEAR NEW. 2000, AREA OF TABLE. 10" X 54", SPINDLE SPEEDS (VARIABLE). 60 TO 4300 RPM, LONGITUDINAL TRAVEL. 38", VERTICAL KNEE TRAVEL. 18", CROSS TRAVEL. 18", QUILL TRAVEL. 5", QUILL FEEDS. 002,004 &.006 IPR, RAM TRAVEL. 17-3/4", DEPTH OF THROAT. 6.7" TO 23.8", TAPER IN SPINDLE. R8 ...more

ACER VERTICAL MILLING MACHINE, MODEL: Ultima 3VK, SERIAL NUMBER: 950706, Table Size: 10" x 50", Longitudinal Travel: 34", Cross Travel: 16", Vertical Knee Travel: 16", Ram Travel: 20", Maximum Weight Of Workpiece: 850 Lbs., Turret Rotation: 360 Degrees, Spindle Speeds, Variable: 60 to 4200 RPM, Spindle Taper: R-8 ...more

SERIAL. 56-1006, MODEL. 430TF-17, AREA OF TABLE (T-SLOTTED). 80" X 17", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS TABLE FEEDS. (32) 3/8 TO 90 IPM, VERTICAL TABLE FEEDS. (32) 1/8 TO 30 IPM, LONGITUDINAL TRAVEL. 42", CROSS TRAVEL. 14", VERTICAL KNEE TRAVEL. 18", RAPID TRAVERSE. 150 IPM, TAPER IN ...more

SERIAL. 3439, MODEL. SERIES II, SPINDLE SPEEDS, VARIABLE. 50 TO 3400 RPM, AREA OF TABLE. 58" X 11", LONGITUDINAL TRAVEL (TABLE). 30", CROSS TRAVEL (SADDLE). 15", VERTICAL TRAVEL (KNEE). 16", QUILL TRAVEL POWERED. 5", TAPER IN SPINDLE. #40NS, POWER TABLE AND SADDLE FEED. 3/8 TO 24 IPM, RAPID TRAVERSE. 24 IPM, HEAD ...more

SERIAL.: 12-BR-193239, MODEL.: SERIES I, AREA OF TABLE.: 42" X 9", SPINDLE SPEEDS.: 60 TO 4200 RPM, SPINDLE FEEDS.:.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL.: 30", CROSS TRAVEL.: 12", VERTICAL KNEE TRAVEL.: 16", QUILL TRAVEL.: 5", RAM TRAVEL.: 12", DEPTH OF THROAT.: 6-3/4" TO 18-3/4", TAPER IN SPINDLE.: R8, HEAD ...more

JLT 79K-10 Entry Panel & Door ClampVersatility: Leave the center squaring bar to do multiple doors at once or remove the bar to take advantage of the full capacity of the machine. -- Capacity for solid wood doors: 48" x 120". -- Quick release latches on the jaws; moveable squaring bar. -- Squaring mechanism can be ...more

, Buck 18" 4 Jaw Lathe Chuck, used. From BUCK, this tooling is ideal for precision work. s an overall diameter of 18" with stamped marking 1318. Perfect for enhancing your lathe capabilities efficiently., Spec Sheet:, Buck 18" - 4 Jaw Lathe Chuck, USED, Brand: Buck, 4 Jaw Chuck, Overall Diameter: 18, Stamped Marking: ...more

Used Approximately 2,000 Gallon Stainless Steel Pressure Vessel, Manufacturer: Cryochem, Capacity: 2,000 gallons, Internal pressure: 277 psi @ 210F, Dimensions: 54" dia. x 22' straight side, Dish top, dish bottom, Material of construction: 304 stainless steel, Additional information: 7/16" shell thickness ...more