Frank Bacon Machinery Sales Warren, MI 48091 Platinum Level DealerSurplus Record Dealer Since 1956Contact Sales Team 586-75... (Show) 586-756-4280 About Frank Bacon Machinery Sales is recognized as having the world's largest inventory of surplus hydraulic and electro-mechanical tensile strength testers, yield strength testers, flexural strength testers and compression testers. They recondition, retrofit and upgrade these materialtesters for stress, strain, yield strength, flexural strength, and proof load testing of any type of material. All reconditioned/retrofitted/certified testers have a 30-day full refund guarantee and 12 month warranty.Products & Services Comparators Inspection Equipment Laboratory Equipment Pharmaceutical Equipment Rebuilding/Retrofitting Testing/Inspection EquipmentAssociations & Affiliations Additional ContactsAddressPhoneSales TeamDetroit, MI586-756-4280Categories All CategoriesAbrasive Saws (1)Actuators (6)Angle Plates (2)Belt Grinders (1)Chillers (1)Compression Testers (43)Cutoff Saws (1)Demagnetizers (2)Ductility Testers (8)Environmental Chambers (19)Hardness Testers (19)Hydraulic Power Units (17)Inspection Equipment (3)Miscellaneous Testing Equipment (47)Notching Machines (1)Optical Comparators (3)Shock Testers (2)Tensile Testers (85)Torque and Torsion Testers (2)Universal Fatigue Testers (61)Vibration Testers (35) Search Listing Titles Filter 359 listings in 21 categoriesAbrasive Saws1 Result Machinery & Equipment / Saws - Other / Abrasive Saws 10" Buehler #AbrasiMet-250 Mdl 10-10106-260 manual abrasive cutter, 10" wheel capacity, 1.25" wheel arborCategory: Abrasive SawsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: BuehlerModel: ABRASIMET-250Buehler AbrasiMet 250 Manual Abrasive Cutter Model 10-10106-260 AbrasiMet 250 Manual Abrasive Cutter Model 10-10106-260 Dimensions Without Stand : 28" x 29" x 22.5 Electrical: 200-240/60Hz Wheel Capacity: 10-inch (254mm) Wheel Arbor Size: 1.25" (32mm) Wheel Speed: 50Hz-2800rpm 60Hz-3400rpm Maximum Cutting Capacity: ...moreActuators6 Results Machinery & Equipment / Tooling and Machinery Accessories / Actuators MTS #204.51, Hydraulic Actuator, 3.3kip, 6" Dynamic / 7.2" Static, 204.51Category: ActuatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 204.513.3KIP MTS 204.51 Hydraulic Actuator MTS Model 204.51 : Model: 204.51 S/N: 268 Assembly Number: 097774-05 Force: 3.3 KIP Area: 1.17 in^2 Stroke: 6” Dynamic / 7.2” Static : Internal LVDT Note: MTS/MOOG Servo Valves Available in 1-15 GPM Flow Rates for Additional Cost Price: FOB Warren, MI Reconditioned with ...more MTS #224.21, 11 KIP (50kN) hydrauic actuator, 10" dynamic stroke, 10.8" static strokeCategory: ActuatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 224.2111KIP (50 kN) MTS 244.21 Hydraulic Actuator MTS Model 244.21 : Force: 11 KIP (50 kN) Area: 3.9 in^2 Stroke: 10” Dynamic / 10.8” Static : Two (2) MTS/Moog Model 252.24C-01 10 GPM Servo Valves FOB Warren, MI Cleaned & Serviced with a 90 Day Warranty & 30 Day Return Guarantee, | #13198-00, DOWNLOAD ...more MTS #244.1XS, Hydraulic Actuator, 9.3KIP (41kN), MTS Swivel BaseCategory: ActuatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 244.1XS9.3KIP (41kN) MTS 244.1XS Hydraulic Actuator MTS Model 244.1XS : Serial Number: 10152155 Assembly Number: 100071363 Force: 9.3 KIP (41 kN) Area: 3.10 in2 Stroke: 2.0” Dynamic / 2.80” Static : MTS Swivel Base Dual 10 GPM MTS Model 252.24G-01 Servo Valves Internal LVDT Price: FOB Warren, MI Reconditioned ...more MTS #244.22, hydraulic actuator, 22 KIP (100kN), 6" dynamic, 6.6" staticCategory: ActuatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 244.2222KIP MTS 244.22 Hydraulic Actuator MTS Model 244.22 : Force: 22 KIP (100 kN) Area: 7.57 in2 Stroke: 6” Dynamic / 6.6" Static : Manifold with (2) Servo Valve Ports Available Internal LVDT Note: 1 - 15 GPM MTS Servo Valves Available for Additional FOB Warren, MI Cleaned, Serviced and Cycled 90 Day Parts and Labor ...more MTS #244.23, Hydraulic Actuator, 35KIP (160 kN), MTS Swivel Base and Rod End SwivelCategory: ActuatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 244.2335KIP MTS 244.23 Hydraulic Actuator USED, 35 KIP (160 kN) Capacity MTS Model 244.23 Hydraulic Actuator with MTS Swivel Base and Rod End Swivel. MTS Model 244.23 : Model: 244.23 Serial Number: 10239956C Assembly Number: 100-179-533 Rev A Force: 35 KIP (160 kN) Area: 12.73 in2 Stroke: 6” Dynamic/6.5” Static ...moreFrank Bacon Machinery Sales has 1 more listing in Actuators. See All 6 Listings » Angle Plates2 Results Machinery & Equipment / Tooling and Machinery Accessories / Angle Plates 16" x 18" x 48" 90 Degree Angle Plate, (6 available)Category: Angle PlatesSeller: Frank Bacon Machinery SalesLocation: Warren, MI90 Degree Angle Plate 16" x 18" x 48" (1) Used 90 Degree Angle Plate., 90 Degree Angle Plate, Over all Dimensions (W x D x H): 16" x 18" x 48", Face Mount Dimensions (W x D x H): 4.5" x 5" x 47", Thread on Mounting Holes: 3/4 in. - 10, Number of mounting Holes: 18, *4 Available, FOB Warren, MI, 30 Day Satisfaction ...more 43" x 26" x 85" 90 Degree Angle Plate, (4 available)Category: Angle PlatesSeller: Frank Bacon Machinery SalesLocation: Warren, MI90 Degree Angle Plate 43" x 26" x 85" (1) Used 90 Degree Angle Plate., 90 Degree Angle Plate, Dimensions (W x D x H): 43" x 26" x 85", Face Mount Dimensions (W x D x H): 4.5" x 3.5" x 84", Thread on Mounting Holes: 3/4 in. - 10, Number of Mounting Holes: 41, *4 Available, FOB Warren, MI, 30 Day Satisfaction Guarantee ...moreBelt Grinders1 Result Machinery & Equipment / Grinders - Other / Belt Grinders Leco #BG-20, Heavy Duty Grinding Belt GrinderCategory: Belt GrindersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: LecoModel: BG-20Leco BG-20 Heavy Duty Grinding Belt Grinder (1) USED Leco BG-20, Model 800-500, 4" Motorized Heavy Duty Course Grinding Belt Grinder S/N: 3034, Leco BG-20 Model 800-500, Belt Width: 4", Work Piece Table: 4" x 9", Motor H.P.: 1/2, Electrical Requirements (V, AMP Hz, Ph): 220, 7.5, 50, 1, EQUIPPED WITH:, Adjustable Belt ...moreChillers1 Result Machinery & Equipment / Cooling Towers & Chillers / Chillers 5 Ton, Advantage Chiller #MK-5A-41HF, 12 GPM, 5 HP, 25 gallon tank, S/N 84379Category: ChillersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: AdvantageModel: MK-5A-41HF5 Ton Advantage Chiller Model MK-5A-41HF Used Advantage Engineering Model MK-5A-41HF 5 Ton Chiller System. : Model: MK-5A-41HF S/N: 84379 Compressor: 5 HP Pump HP / Flow: 2 HP / 12 GPM Refrigerant: R-22 Tank (gal.): 25 Fittings (FNPT/in.): 1.25 FLA (amps): 19.3 Electrical Requirements: 460 / 3 / 60 Overall ...moreCompression Testers43 Results Machinery & Equipment / Testing Equipment / Compression Testers 1125 lbf. (5kN) Frank Bacon #FB-EMS-TT, Single Column Tension and Compression Testing Machine with Precision Load Cell, newCategory: Compression TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Frank BaconModel: FB-EMS-TTNEW 1,125 lbf (5kN) Single Column Frank Bacon Model FB-5EMS-TT, NEW 1,125 lbf (5kN) Capacity Single Column Frank Bacon Tension and Compression Testing Machine with Precision Load Cell., Model FB-5EMS-TT, Tension Testing Opening (Less Tooling): 38", Compression Testing Opening (Less Tooling): 38", Testing Stroke: 38" ...more 1125 lbf. (5 kn) Instron #4201 Electro-Mech Unispace tension & compression testingCategory: Compression TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: 42011,125lbf (5kN) Instron 4201 Unispace Testing Machine Reconditioned 1,125 lbf (5 kN) Capacity Instron Model 4201 Electro-Mechanical Unispace Tension and Compression Testing Machine updated with New 5 kN Load Cell and Precision Drive System S/N: 1195, Instron Model 4201, Tension Testing Opening (Less Tooling): 48" ...more 1125 lbf. (5kN) Instron #4465, Table Top Precision Two Ball Screw Electro-Mechanical Tension and Compression Testing Machine FrameCategory: Compression TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: 44651,125lbf (5kN) Instron 4465 (1) Reconditioned 1,125 lbf (5 kN) Capacity Instron, Model 4465, Table Top Precision Two Ball Screw Electro-Mechanical Tension and Compression Testing Machine Frame., Instron 4465, Tension Testing Opening (Less Tooling): 48", Compression Testing Opening (Less Tooling): 48", Distance Between ...more 1125 lbf. (5kn) MTS Sintech #1/S, electro-mechanical unispace tension & compression testing machine, serial #1S/20996/178Category: Compression TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Mts SintechModel: 1/S1,125lbf (5kN) MTS Sintech 1/S 1,125lbf (5kN) MTS Sintech 1/S, (1) Reconditioned 1,125 lbf (5 kN) Capacity MTS Sintech, Model 1/S, Electro-Mechanical Unispace Tension, and Compression Testing Machine S/N: 1S/20996/178, MTS Sintech Model 1/S, Tension Testing Opening (Less Tooling): 46", Compression Testing Opening ...more 1150 lbf. (5kN) Instron #3345, Precision Single Ball Screw Unispace Tension and Compression Testing Machine, reconditionedCategory: Compression TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: 3345450lbf (2kN) Instron 4444/5544 Single Column Tensile & Compression Testing System, Instron 4444/5544:Tension Testing Opening (Less Tooling): 42”Compression Testing Opening (Less Tooling): 42”Testing Stroke: 36”Testing Speed (IPM):.00002 – 40Approximate Overall Dimensions:Load Frame (W x D x ...moreFrank Bacon Machinery Sales has 38 more listings in Compression Testers. See All 43 Listings » Cutoff Saws1 Result Machinery & Equipment / Saws - Other / Cutoff Saws Leco #VC-50 Model 800-900, Cut Off SawCategory: Cutoff SawsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: LecoModel: VC-50Leco VC-50 Model 800-900 Cut Off Saw (1) USED Leco VC-50 Model 800-900 Vari/Cut Precision Diamond Cut-Off Saw S/N: 613, Leco Model 800-900, Wheel Speed-Variable: 0-500 RPM, Wheel Size: 5", Approximate Dimensions (W x D x H): 14" x 16" x 13½", Weight (lbs.): 50, Electrical: 115/230, 60, 1, Tachometer Display ...moreDemagnetizers2 Results Machinery & Equipment / Tooling and Machinery Accessories / Demagnetizers Magnaflux #SB-1416, Industrial Demagnetizer, 14" x 16" Coil Opening, 12,000 Amps, Cycle TimerCategory: DemagnetizersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MagnafluxModel: SB-1416Magnaflux SB-1416 Industrial Demagnetizer Magnaflux SB-1416 Industrial Demagnetizer, Coil Opening(W x H): 14" x 16" Coil Ampere Turns, Empty(Amps): 12,000 Duty ON/OFF Cycle(Sec): 30 / 30 Approximate Overall Dimensions(W x D x H): 48" x 30" x 58" Approximate Weight(lbs): 625 Electrical Requirements(V,Hz,Ph,A): 460, 60 ...more Magnaflux #SB-911, Industrial Demagnetizer, 9" x 11" Coil Opening, 8,800 Amps, Cycle TimerCategory: DemagnetizersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MagnafluxModel: SB-911Magnaflux SB-911 Industrial Demagnetizer Magnaflux SB-911 Industrial Demagnetizer, Coil Opening(W x H): 9" x 11" Coil Ampere Turns, Empty(Amps): 8,800 Duty ON/OFF Cycle(Sec): 30 / 30 Approximate Overall Dimensions(W x D x H): 20" x 20" x 52" Approximate Weight(lbs): 350 Electrical Requirements(V,Hz,Ph,A): 440, 60, 1 ...moreDuctility Testers8 Results Machinery & Equipment / Testing Equipment / Ductility Testers 30000 lb. Detroit #G2-S, Ductility TesterCategory: Ductility TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: DetroitModel: G2-S30K Detroit G2-S Ductility Tester Reconditioned 30,000 lbf Capacity Detroit, Model G2-AS. S/N: 546, Detroit Model G2-S, Capacity (Lbs): 30,000, Range (s) (Lbs): 0 – 6K, 0 – 30K, Maximum Specimen Thickness: 250", Approximate Dimensions (W x D x H): 29 ½" x 26" x 30", Approximate Weight (Lbs): 525 ...more 30000 lb. Tinius-Olsen #A-12, Sheet Metal Ductility TestingCategory: Ductility TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Tinius-OlsenModel: A-1230K Tinius Olsen A-12 Sheet Metal Ductility Testing, (1) USED, 30K Tinius Olsen Ductomatic, Model A-12, Sheet Metal Ductility Testing Machine, Upgraded with a New Digital Display Microprocessor. S/N 154833, Tinius Olsen Ductomatic, Capacity (lbs.): 30,000, Range (lbs.): 0-30,000, Maximum Specimen Thickness:.375" ...more 30000 lb. Tinius-Olsen Olsen Ductomatic #A-12, Ductility Testing MachineCategory: Ductility TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Tinius-OlsenModel: A-1230K Tinius Olsen Ductomatic A-12 Ductility Testing Machine, (1) USED, 30,000 lbf Capacity Tinius Olsen Ductomatic, Model A-12, Sheet Metal Ductility Testing Machine, Upgraded with a New Digital Display Microprocessor. S/N 107696, Tinius Olsen Ductomatic Model A-12, Capacity (lbs): 30,000, Range (lbs): 0-30,000 ...more 30000 lb. Tinius-Olsen Olsen Ductomatic #A-12, Sheet Testing MachineCategory: Ductility TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Tinius-OlsenModel: A-1230K Tinius Olsen Ductomatic A-12 Sheet Testing Machine, (1) USED, 30K Tinius Olsen Ductomatic Model A-12, Sheet Metal Ductility Testing Machine, Upgraded with a New Digital Display Microprocessor., Tinius Olsen Ductomatic A-12, Capacity (lbs): 30,000, Range (lbs): 0-30,000, Maximum Specimen Thickness:.375" ...more 30000 lb. Tinius-Olsen Ductomatic, Ductility TestingCategory: Ductility TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Tinius-Olsen30K Tinius Olsen Ductomatic Ductility Testing, (1) USED 30,000 lbf Capacity Tinius Olsen Ductomatic, Model A-12, Sheet Metal Ductility Testing Machine. S/N 151101, Tinius Olsen Ductomatic Model A-12, Capacity (lbs.): 30,000, Range (s) (lbs.): 0 – 30K (200 lbf), 0 – 6K (50 lbf), Maximum Specimen ...moreFrank Bacon Machinery Sales has 3 more listings in Ductility Testers. See All 8 Listings » Environmental Chambers19 Results Machinery & Equipment / Testing Equipment / Environmental Chambers 8.6" width x 8.6" D x 22.8" H Environmental Test Chamber for universal testing machines, newCategory: Environmental ChambersSeller: Frank Bacon Machinery SalesLocation: Warren, MINew FB-280DT Environmental Test Chamber for Universal Testing Machines New FB-280DT Environmental Test Chamber for Universal Testing Machines, • Temperature Range: -80°C up to +280°C, • Stainless Steel Body, • Internal Dimensions, (w x d x h) 220 x 220 x 580mm (8.6 x 8.6 x 22.8 in), • ...more 9.4" width x 9" D x 26" H Instron #3119-409, test chamber, Stainless steel interior, chamber door w/viewing window & interior lightCategory: Environmental ChambersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: 3119-409Instron Model 3119-409 Test Chamber Instron Model 3119 : Temperature Range (°F): Heating: Ambient to +480 Cooling: Ambient to -95 Set Point Accuracy (°F): +/- 4 Approximate Inside Dimensions (W x D x H): 9.4" x 9" x 26" Approximate Outside Dimensions (W x D x H): 13.8" x 23.6" x 28.9" Approximate Chamber ...more 16" width x 4" D x 18" H ATS #3320, high temperature testing furnace, 1700°C, 208 V., 1 phaseCategory: Environmental ChambersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: AtsModel: 3320ATS 3320 High Temperature Testing Furnace ATS Series 3320 : MAX. Temp: 1700 Celsius Overall Outside Furnace Dimension: 16" OD x 18" H (4" ID) Electrical Requirements (V, Hz, Ph, Amp): 208, 60Hz, 1, 30 : ATS Single Zone Digital Temperature Controller Cabinet Eurotherm Model 2204FM Mounting Rod/Bracket for Tensile ...more 16" width x 11" D x 12" H Tenney Benchtop Environmental Chamber for Heated and Cooled TestingCategory: Environmental ChambersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: TenneyTenney Model THJR Environmental Chamber Used Tenney Engineering Model THJR Benchtop Environmental Chamber for Heated, Cooled & Humidity Testing. Serial Number: SB11056-514 Controller: Tenney VersaTennII (Includes Full Users Manual) Temperature Range: 10 F to 200 F (-12 C to +93 C) Humidity Range: 20% to 98% ...more 16" width x 11" D x 12" H Thermotron #S1.2C, Temperature Test Chamber, -73° C to 180° CCategory: Environmental ChambersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: ThermotronModel: S1.2CThermotron Model S-1.2C Temperature Test Chamber Thermotron Model S-1.2C Environmental Chamber for Heating & Cooling Click to View OEM Model: S-1.2C Serial Number: 28380 Temperature Range: -73°C to 180°C (-99.4°F to 356°F) Internal Dimensions: 16"W x 11"D x 12"H Overall Dimensions: 30"W x 22D" x ...moreFrank Bacon Machinery Sales has 14 more listings in Environmental Chambers. See All 19 Listings » Hardness Testers19 Results Machinery & Equipment / Testing Equipment / Hardness Testers Antonik #AB-8 Rockwell Hardness TesterCategory: Hardness TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: AntonikModel: AB-8Antonik AB-8 Rockwell Hardness Tester (1) USED Antonik Model AB-8 B and C Scale Rockwell Hardness Tester S/N:7233, Antonik AES-8, Vertical Capacity: 8", Throat Depth: 5.25", 1/16" Carbide Ball Penetrator Four (4) Anvils: Plane Flat, Raised Flat, Raised Shallow V, Standard V One (1) "B" and One (1) "C" Scale Test ...more CV Instruments #CV-600A Cv Instruments Hardness Tester for B & C Rockwell Hardness Scales. S/N 12334Category: Hardness TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Cv InstrumentsModel: CV-600ACV-600A Rockwell Hardness Tester, USED CV Instruments Model CV-600A Rockwell Hardness Tester for B & C Rockwell Hardness Scales. S/N: 12334 : Vertical Space : 6.7"Throat Depth: 6"Dimensions: 6" x 19 x 28Weight: 85kgTest Loads: 10kgf preload/ 60, 100, 150kgf main loadRockwell Scales: A, B, C, F. Click for Full Spec ...more Detroit #DH-1, hydraulic Brinell hardness testerCategory: Hardness TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: DetroitModel: DH-1Detroit DH-1 Hydraulic Brinell Hardness Tester, (1) USED Detroit, Model DH-1, Hydraulic Brinell Hardness Tester. S/N 784, Detroit Model DH-1, Major Brinell Loads (Kgs.): 500 – 3000, Standard Vertical Work Height: 6", Throat Depth: 6", Maximum Test Stroke: 7/16", Approximate Overall Dimensions (W x D x H): 16" x ...more Detroit #PH-1, multi-load Brinell hardness testerCategory: Hardness TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: DetroitModel: PH-1Detroit PH-1 Multi-Load Brinell Hardness Tester, (1) USED Detroit, Model PH-1, Hydraulic Brinell Hardness Tester with Multiple Load Settings. S/N 550, Detroit Model PH-1, Major Brinell Loads (Kgs): 500 – 3000, Standard Vertical Work Height: 12", Throat Depth: 6", Maximum Test Stroke: 7/16", Approximate Overall ...more Detroit #PHL-3 Long Stroke Brinell Hardness TesterCategory: Hardness TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: DetroitModel: PHL-3Detroit PHL-3 Long Stroke Brinell Hardness Tester (1) USED Detroit Model PHL-3 Long Stroke Hydraulic Brinell Hardness Tester. S/N 415, Detroit Model PHL-3, Major Brinell Loads (Kgs.): 500 – 3000, Standard Vertical Work Height: 34", Throat Depth: 20", Maximum Test Stroke: 25", Approximate Overall Dimensions (W x ...moreFrank Bacon Machinery Sales has 14 more listings in Hardness Testers. See All 19 Listings » Hydraulic Power Units17 Results Machinery & Equipment / Hydraulic Power Units 25 HP MTS 510.10, Hydraulic Power Supply, 10.1 GPM, 3000 psi, 230/460 V.Category: Hydraulic Power UnitsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Mts10.1 GPM MTS 510.10 Hydraulic Power Supply Reconditioned 10.1 GPM MTS Model 510.10 Hydraulic Power Supply., MTS Model 510.10, Model: 510.10, Flow (GPM): 10.1 (45.9 LPM), Max Pressure (PSI): 3,000, Motor: 25 HP, Voltage Requirements (V, HZ, PH, A): 460/230, 60, 3, 34/68, Cooling: New Water Cooled Heat Exchanger, FOB ...more 25 HP MTS 505.11, hydraulic power unit, 11 GPM, 3000 psi, reconditioned, 2006Category: Hydraulic Power UnitsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsYear: 200611GPM MTS 505.11 Hydraulic Power Unit Reconditioned MTS Model 505.11, 11 GPM SilentFlo Hydraulic Power Unit, 11 GPM MTS Model 505.11 HPU SilentFlo, Model: 505.11, Serial Number: 10226500, Assembly Number: HD-505-001, Flow (GPM): 11.0 (41.6 l/min), MFG Date: 2006, Pressure (PSI): 3,000, Motor: 25 HP, Hours: 0 (Fully ...more 25 HP MTS 505.11, 11 GPM SilentFlo Hydraulic Power Unit, reconditionedCategory: Hydraulic Power UnitsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Mts11GPM MTS 505.11 Hydraulic Power Unit Reconditioned MTS Model 505.11, 11 GPM SilentFlo Hydraulic Power Unit, 11 GPM MTS Model 505.11 HPU SilentFlo, Model: 505.11 Serial Number: 10200169 Assembly Number: 100-150-897 Rev A Flow (GPM): 11.0 (41.6 l/min) MFG Date: 11/2005 Pressure (PSI): 3,000 Motor: 25 HP Hours: 0 (Fully ...more 40 HP MTS #505.20, Hydraulic Power Supply, 3000 psi, 20 GPM, 440/460 V., 2006Category: Hydraulic Power UnitsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsYear: 200620GPM MTS 505.20 Hydraulic Power Supply MTS Model 505.20, Model: 505.20, Serial Number: 10221576, Assembly Number: 100-009-559 Rev A, Flow (GPM): 20.0 (75.5 l/min), MFG Date: 09/2006, Pressure (PSI): 3,000, Motor: 40 HP, Voltage Requirements (V, Hz, Ph, A): 440-460, 60, 3, 53.1, Cooling: Water Cooled Heat Exchanger ...more 40 HP MTS #505.20, hydraulic power supply, 20 gpm, 3000 psi, water cooled heat exchanger, 2008Category: Hydraulic Power UnitsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsYear: 200820GPM MTS 505.20 Hydraulic Power Supply MTS Model 505.20 : Model: 505.20 Serial Number: 10273353 Assembly Number: 100-199-739 Rev A Flow (GPM): 20.0 (75.5 l/min) MFG Date: 08/2008 Pressure (PSI): 3,000 Motor: 40 HP Hours: 8,320 Voltage Requirements (V, Hz, Ph, A): 440-460, 60, 3, 53.1 Cooling: Water Cooled Heat ...moreFrank Bacon Machinery Sales has 12 more listings in Hydraulic Power Units. See All 17 Listings » Inspection Equipment3 Results Machinery & Equipment / Inspection Equipment Magnaflux #DRA-2393, portable magnetic particle, 1500 amp AC, 1000 amp HWDC, 50/60 hzCategory: Inspection EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MagnafluxModel: DRA-2393Magnaflux DRA-2393 1,500 AMP AC Portable Magnetic Particle Inspection Unit, (1) Used 1,500 Amp AC Magnaflux Model DRA-2393 Magnetic Particle Tester Portable Tester. S/N 601248, Magnaflux Model DRA-2393, Magnetizing Max Output Current(Amps): 1,500 AC, Magnetizing Continuous Output Current(Amps): 1000 AC, Voltage ...more Olympus #GX41F, inverted metallurgical microscope, instruction manual, X-Y mechanical stageCategory: Inspection EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: OlympusModel: GX41FOlympus Model GX41F Inverted Metallurgical Microscope USED Olympus Model GX41F Inverted Metallurgical Microscope., Olympus Model GX41, Instruction Manual, X-Y Mechanical Stage, Binocular Eyepieces: (2) WHB 10x/20, Objectives: Mplan 5, 10, 20 & 50x, Halogen Light Source, New AM Scope Digital Camera and Software for ...more Zeiss #ICM-405, Metallurgical microscopeCategory: Inspection EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: ZeissModel: ICM-405Zeiss ICM 405 Inverted Metallurgical Microscope, (1) USED Zeiss Model ICM 405 Inverted Metallurgical Microscope for Both Incident and Transmitted Light Operations., Zeiss Model ICM 405, 1x Revolving Nose piece X-Y Mechanical Stage Binocular Eyepieces: (2) Kpl-W 10x Epi-Plan Objectives: HD2.5x, HD8x, HD16x, HD40x ...moreMiscellaneous Testing Equipment47 Results Machinery & Equipment / Testing Equipment / Miscellaneous Testing Equipment New Set of 300kN Capacity Wedge Action Instruments Grips, (2) wedge holders, (3) sets of vee grip wedges (2" W)Category: Miscellaneous Testing EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Action InstrumentsNew Set of 300kN Capacity Wedge Action Grips New Set of 300kN Capacity Wedge Action Grips, Includes: (2) Wedge Holder Assemblies (3) Sets of Vee Grip Wedges (Width: 2") 9 - 14mm (.354- 0.551") 14 - 20mm (0.551 - 0.787") 20 - 26mm (.787 - 1") (3) Sets of Flat Grip Wedges (Width: 2") 0 - 7mm (0.0 - 0.275") 7 - 14mm ...more ASTM #C633, Test Fixture for Thermal Spray Coatings, Adhesion TestingCategory: Miscellaneous Testing EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: AstmModel: C633ASTM C633 Test Fixture for Thermal Spray Coatings Fixture for Adhesion Testing of Thermal Spray Coatings ASTM C633, Made Per ASTM C633 Requirements, Self-Aligning Design, Upper and Lower 50kN (11,250 lbf) Grip Holder, Upper and Lower Tensile Grip M16 Threaded Inserts, Upper and Lower 25mm Diameter Stainless Steel ...more ASTM #F1306 Test Fixture, F1306Category: Miscellaneous Testing EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: AstmModel: F1306ASTM F1306 Test Fixture Puncture Resistance Fixture with Pneumatic Clamping for ASTM F1306 Testing Click to View ASTM F1306 Video * Pneumatic Puncture Fixture * Confirm to ASTM-F1306-18 * Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates * Clamping force 5kN / 8 bar (9kN ...more Bolt Extensometer Model 3565, Adjustable from 1 to 6 inch (25 mm to 150 mm) gauge lengthsCategory: Miscellaneous Testing EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Bolt ExtensometerModel: 3565Bolt Extensometer New Model 3565 Bolt Extensometer, Adjustable from 1 to 6 inch (25 mm to 150 mm) gauge lengths Standard temperature range (-40°C to 100°C) Connector to be determined, | Bolt Extensometer, DOWNLOAD SPEC SHEET. Eccentric Roller Grips, Rated 10 kN (2200 lb), 8 mm (0.32" ) max sample thicknessCategory: Miscellaneous Testing EquipmentSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Eccentric10kN Eccentric Roller Grips (1) Set of (2) Eccentric Roller Grips, Rated 10 kN (2200 lb), Max Sample Thickness: 8 mm (0.32"), Knurled surface roller 50 mm (1") diameter, Smooth surface back plate, 15.9mm female cup adapter with a hole for a 8mm dia. cross pin Max sample width 60 mm (2.4"), Set of (2) Machine Adapters ...moreFrank Bacon Machinery Sales has 42 more listings in Miscellaneous Testing Equipment. See All 47 Listings » Notching Machines1 Result Machinery & Equipment / Notching Machines TMI #22-05 Izod/Charpy motorized notching cutter, 0 to 5 ipm, 160 to 450 fpm, 1 to 4.5" W clamping viseCategory: Notching MachinesSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: TmiModel: 22-05TMI 22-05 Izod/Charpy Motorized Notching Cutter TMI 22-05 Izod/Charpy Motorized Notching Cutter : Approximate Overall Dimensions: 21” x 21” x 21” Approximate Weight (lbs): 55 Electrical Requirements (V, Hz, Ph): 115, 60, 1 : Variable Sample Feed: 0 to 5 ipm Variable Cutter Speed: 160 to 450 ft./min. ...moreOptical Comparators3 Results Machinery & Equipment / Optical Comparators 14" Microvu #M1040270 Spectra, Optical Comparator, 18" x 5" T-Slotted Work StageCategory: Optical ComparatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MicrovuModel: M1040270Microvu Model M1040270 Spectra 14" Optical Comparator Microvu Spectra 14" Optical Comparator Model M1040270 MFG 8/9/07 : Screen Diameter: 14" T-Slotted Work Stage: 18" x 5" Electrical Requirements: 120V, 60Hz, 1PH Floor Space (W x D x H): 32" x 46" x 75" Approximate Weight: 400lbs. : InSpec Metrology Software for Full ...more Hydraulic Power Supply And Units Hpu Hps From 1gpm To 140gpmCategory: Optical ComparatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MIHydraulic Power Supply and Units HPU HPS from 1GPM to 140GPM Hydraulic Power Supply and Unit Rental - HPU HPS from 1GPM to 140GPM, Instron, MTS, many model ranges for rent!, Request a quote or call today for rental machines in stock ready to ship!, FOB Warren, MI, | HydraulicRental, DOWNLOAD SPEC SHEET. Hydraulic Service Manifold RentalCategory: Optical ComparatorsSeller: Frank Bacon Machinery SalesLocation: Warren, MIHydraulic Service Manifold Rental Hydraulic Service Manifolds 40 GPM - 250GPM, MTS, many model ranges for rent!, MTS Model 293.22, 290.21, 290.13, 293.11, Request a quote or call today for rental machines in stock ready to ship!, FOB Warren, MI, | HydraulicServiceRental, DOWNLOAD SPEC SHEET.Shock Testers2 Results Machinery & Equipment / Testing Equipment / Shock Testers Lansmont #95/115, Shock Test System, 1000 lbs Max Specimen WeightCategory: Shock TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: LansmontModel: 95/115Lansmont Model 95/115 Shock Test System Lansmont Model 95/115 : Max Specimen Weight: 1000 lbs Max Package Size: Length: 45" Width: 37" Height: No Restrictions Max Acceleration: 600g (Bare Table) Min Pulse Duration: 2 msec (Half Sine) Max Velocity Changes: 24 ft/sec Approximate Overall Dimension: Height 121 in. (307.5 ...more MTS #IMPAC Shock Test System, 36" W x 42" D Table, 600 lbs max weight, 110VAC, 60Hz, 1PhCategory: Shock TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: IMPAC SHOCK TEST SYSTEMMTS IMPAC Shock Test System MTS Model IMPAC : Electrical Requirements: 110VAC, 60Hz, 1Ph (Hydraulic Lift System) Maximum Specimen Weight: 600 lbs. Maximum Specimen Height: No Restrictions Maximum Acceleration: 600g Over all Dimensions (W x D x H): 64" x 42" x 107" Seismic Base Weight: 6,500 lbs Overall Weight: 11,000 ...moreTensile Testers85 Results Machinery & Equipment / Testing Equipment / Tensile Testers 225 lbf (1kN) MTS #QTest/2L eP2 testing machineCategory: Tensile TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: QTEST/2L225 lbf (1kN) MTS QTest/2L eP2 Testing Machine (1) Reconditioned 225 lbf (1 kN) Capacity MTS, Model QTest/2L, Electro-Mechanical Ball Screw Tension and Compression Testing Machine with MTS 250 lbf Capacity Load Cell. S/N QT2-695-032E, MTS Model QTest/2L, Tension Testing Opening (Less Tooling): 40", Compression Testing ...more 300 lbf, Instron / Satec #SI-1K3 Impact TesterCategory: Tensile TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: SI-1K3300 ft-lb Instron/Satec SI-1K3 Impact Tester Instron/Satec Model SI-1K3 : Capacity (ft-lbs): 300 Range(s)(ft-lbs): 0 – 300 Approximate Overall Dimensions (W x D x H): 36" x 20" x 61" Space Required (W x D x H): 80" x 24" x 70" Approximate Weight (lbs): 1200 : Universal Pendulum Used Charpy Anvils, Support and ...more 300 lbf. Tinius Olsen Model 84 Charpy Impact Tester, Universal Pendulum, Electronic BrakeCategory: Tensile TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Tinius OlsenModel: 84Tinius Olsen Model 84 Charpy Impact Tester Tinius Olsen Model 84 Charpy Impact Tester : Capacity (Ft-lbs): 300 Range(s)(Ft-lbs): 0 – 300 Approximate Overall Dimensions (W x D x H): 36" x 20" x 65" Space Required (W x D x H): 84" x 20" x 73" Approximate Weight (lbs): 1,800 : Universal Pendulum Used Charpy Anvils ...more 332 lbf. Frank Bacon Machinery 450 Joules FB-450C Digital Display Charpy Impact Testing Machine, Touch Screen Display, newCategory: Tensile TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Frank BaconNew FB-450C Charpy Impact Tester New Frank Bacon Machinery 450 Joules FB-450C Digital Display Charpy Impact Testing Machine. : Max. Impact Energy: 450J (332 Ft/Lbs) Impact Speed: 5.24m/s Angle Resolution:.025 Electrical Requirements: 230V, 60Hz, 3PH Dimensions: 2220×900×2220mm Weight: 1000kg : Touch Screen ...more 1000 lbf Instron #1011, Tension And Compression MachineCategory: Tensile TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: 10111K Instron 1011 Tension and Compression Machine, (1) Reconditioned 1K Instron 1011, Electro-Mechanical Tension and Compression Testing Machine. Updated with New SCR Solid State Variable Speed Drive Controller & 1000 lbf. load cell S/N-C3161, Instron 1011, Tension Testing Opening (Less Tooling): 42", Compression ...moreFrank Bacon Machinery Sales has 80 more listings in Tensile Testers. See All 85 Listings » Torque and Torsion Testers2 Results Machinery & Equipment / Testing Equipment / Torque and Torsion Testers 10000 lb. Tinius-Olsen #Lo-Torq, 5°-360° /min.both directions, 0-18"btwn chucksCategory: Torque and Torsion TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Tinius-OlsenModel: LO-TORQ10,000 in.-lb. Tinius Olsen Lo-Torq Bench Top Torsion Testing System, (1) USED 10,000 In-Lb (1,130 N-m) Capacity Tinius Olsen, Model Lo-Torq, Bench Top Electro-Mechanical Torsion Testing Machine with Torsion Cell and updated with New SCR Variable Speed Drive Controller. S/N 160170, Tinius Olsen Model Lo-Torq, Testing ...more ServoTest Higher Performance Rotary Torsional Fatigue Actuator, 5000 Nm max torqueCategory: Torque and Torsion TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI5000 N-m ServoTest Higher Performance Rotary Torsional Fatigue Actuator Used 5000 Nm ServoTest Input Torque Rotary Actuator with Load Cell and Adjustable Base Assembly, Click to View ServoTest Rotary Actuator Brochure, Max Torque: 5000 Nm, Max Angle: Run Continuously, Overall Dimensions: 75"L x 36"D x 52"H, Adjustable ...moreUniversal Fatigue Testers61 Results Machinery & Equipment / Testing Equipment / Universal Fatigue Testers 1.5 KIP MTS #205.09 Hydraulic ActuatorCategory: Universal Fatigue TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 205.091.5 KIP MTS 205.09 Hydraulic Actuator, (1) USED 1.5 KIP Capacity MTS Model 205.09 Hydraulic Structural Actuator S/N: 476 Assembly No.: 367714-11, MTS Model 205.09, Force: 1.5 KIP, Area: 0.549 in², Stroke: 1” Dynamic, 1.36” Static, 3.3 KIP (15 kN) MTS Model 661.19A-03 Load Cell 5 GPM Moog 760C262A ...more 2.2 KIP, ITS #1000-16, vibration system with power amplifierCategory: Universal Fatigue TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: ItsModel: 1000-162.2 KIP ITS-1000 Vibration System with Power Amplifier, (1) New Frank Bacon, Model ITS-1000 2,200 lbf (9.8 kN) Electrodynamic Vibration Test System with Power Amplifier., Frank Bacon Model ITS-1000 Vibration System, Sine - Force Rating: 9.8 kN (2,200 lbf), Random - Force Rating:9.8 kN (2,200 lbf), Shock Peak -Force ...more 2.2 KIP (10kN) MTS #831.50 Elastomer Fatigue Test SystemCategory: Universal Fatigue TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 831.502.2KIP (10kN) MTS 831.50 Elastomer Fatigue Test System, MTS 858 Mini Bionix:Model Number/Serial Number: 831.50/1317417Frame Capacity (KIP): 2.2 (10 kN)Actuator Capacity (KIP): 2.2 KIP @ 3,000 PSINumber Of Columns: 2Distance Between Columns: 16"Frequency Range: 0.01 to 1000 HzTable Size (W x D): 16" x 18"Overall ...more 2.25 KIP (10 kN), Instron #8511 Tension, Compression & Fatigue TestingCategory: Universal Fatigue TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: InstronModel: 85112.25 KIP Instron 8511 Fatigue Material Testing System, (1) USED 2.25 KIP (10 kN) Capacity Instron, Model 8511, Bench Top Dynamic Digital Control Material Testing System (Tension, Compression & Fatigue Testing) Upgraded to New Electronics, Software & Controls, Instron Model 8511, LOAD FRAME :, Model ...more 3.3 KIP #312.21 Fatigue Load FrameCategory: Universal Fatigue TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: MtsModel: 312.213.3 KIP MTS 312.21 Fatigue Load Frame (1) USED 3.3 KIP (15 kN) Capacity MTS Model 312.21 Material Fatigue Testing System (High Stroke/High Speed). S/N 1314, MTS Model 312.21, Model Number / Serial Number: 312.21/1314, Capacity (KIP): 22, Number Of Columns: 2, Distance Between Columns: 20.75", Test Specimen Max. ...moreFrank Bacon Machinery Sales has 56 more listings in Universal Fatigue Testers. See All 61 Listings » Vibration Testers35 Results Machinery & Equipment / Testing Equipment / Vibration Testers 1.1 KIP (5kN) LDS #V780, Vibration Test SystemCategory: Vibration TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Lds1.1KIP (5kN) LDS V780 Vibration Test System, ***Ready for Immediate Shipment*** LDS Model V780 HPA-K : Random Force Rating (lbs.): 950 lbf (4.23 kN) rms Sine Force Rating (lbs.): 1,150 lbf (5.12 kN) Peak Shock Force Rating (lbs.): 2,135 lbf (9.5 kN) 1/2 Sine Shock Peak to Peak Displacement: 1" (25.4 mm) Acceleration ...more 1.3 KIP Frank Bacon ITS-600-ST, Vibration Test System With Slip TableCategory: Vibration TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Frank1.3 KIP ITS-600-ST Vibration Test System with Slip Table, (1) New Frank Bacon Model ITS-600-ST, 1,320 lbf (5.87 kN) Electrodynamic Vibration Test System with Power Amplifier and Slip Table., ITS-600-ST Vibration System, Sine Force Rating: 5.87 kN (1,320 lbf), Random Force Rating: 4.10 kN (921 lbf), Shock Peak Force ...more 1.3 KIP Frank Bacon ITS-600, electrodynamic vibration test system with power amplifier, new, warrantyCategory: Vibration TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Frank1.3 KIP ITS-600 Vibration Test System with Power Amplifier, (1) New Frank Bacon Model ITS-600, 1,320 lbf (5.87 kN) Electrodynamic Vibration Test System with Power Amplifier., ITS-600 Vibration System, Sine Force Rating: 5.87 kN (1,320 lbf), Random Force Rating: 4.10 kN (921 lbf), Shock Peak Force Rating : 11.76 kN ...more 2.2 KIP Frank Bacon ITS-1000-ST, Vibration System With Slip TableCategory: Vibration TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Frank2.2 KIP (10 kN) Frank Bacon Vibration System ITS-1000-ST With Slip Table, (1) New Frank Bacon, Model ITS-1000-ST, 2,200 lbf (9.8 kN) Electrodynamic Vibration Test System with Power Amplifier and Slip Table, Frank Bacon Model ITS-1000-ST Vibration System, (Sine) Force Rating: 9.8 kN (2,200 lbf.), (Random) Force Rating: ...more 2.2 KIP Unholtz Dickie #S202, vibratin system & slip table, 2" peak to peak stroke, 13.40" table diameterCategory: Vibration TestersSeller: Frank Bacon Machinery SalesLocation: Warren, MI Mfr: Unholtz2.2KIP Unholtz Dickie S202 Vibration System and Slip Table Unholtz-Dickie Model S202 : Force Rating: Random: 2,200 lbs. (RMS) Sine: 2,200 lbs. Stroke: 2" peak to peak Frequency Range (Hz): DC to 3,500 Hz Max Table Diameter: 13.40” Armature Weight: 22 lbs. Total Weight (lbs.): 5,500 lbs. Voltage Requirements: ...moreFrank Bacon Machinery Sales has 30 more listings in Vibration Testers. See All 35 Listings »