Buy or Sell Your Upcut Saws

Cantek Uncut Saw with 5 HP motor, Tigerstop System with 12' Infeed.

Nelson Atkinson NA-800 used Right hand Upcut saw.For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more

Used for cutting processes of aluminum, vinyl and wooden profiles., Hydro-Pneumatic cutting process, Secure cutting by the cover a safety sensor, Cutting speed adjustment based on the profile, Cutting at any desired angle between -45° and +45°, Cutting at -45°, -30°, -22.5°, -15°, 0° ...more

Cincinnati Cut-to-Length Line Shear and Stacker, Capacity: 72" Wide x 0.135" Mild Steel, -Mechanical Upcut Shear:, Model: HHS 551, 72" x 0.135" Capacity, Entry Pass Line Rolls, Entry Side Guides, AC Motor, Air Clutch and Brake, -Measuring Table:, 72" Wide, 14' Long, Skate Wheel Conveyor, Mechanical Flag Type Stop ...more

12" blade, 7-1/2 HP motor 3 phase, Foot Pedal control, Left Hand machine.

Stock #: 121250042, Location: GA, Brand: Ironwood, Model: Cut14, Saw Blade: 14", Cutting Capacity (thickness x width): 1" x 10"/ 2" x 9' / 3" x 8", Saw Blade Speed: 4100 RPM, Motor: 5 HP, Pusher Length: 10', Tiger Stop Readout Control, Tiger Touch Control, Label Printer, Tiger Stop ...more

Atech Model CRATER-06 A/700 Heavy Duty Automatic Upcut Miter Saw Heavy duty upcut miter saw designed for straight and miter cuts of PVC (vinyl), aluminum extrusions and wood. Two hands safety operation Hydro-pneumatic saw blade feed for smooth and precise cutting (fully adjustable) Adjustable saw blade rising speed 2 ...more

, - Left Hand Unit feeding from Right to Left, - Capacity: 2-3/16” x 8-1/4”, - Magnetic motor controls, - Motor - 5HP, 3PH, 230/460 wired 460V, - Dust chute, - Blade Capacity: 14”, - Pusher length is 10'. The table is 12'.

ATECH CRATER-02A 16.5" Miter Upcut SawHeavy-duty construction for long machine life; movable back fence enables you to cut bigger profiles on both straight and miter cuts. -- : 5.5 HP Saw motor; 16.5" dia. blade; (2) horizontal and (2) vertical pneumatic clamps to provide firm material hold-down through cutting cycle. ...more

Atech Model Crater-06 A Heavy Duty Automatic Cutoff Saw The Crater-06 A is a heavy duty automatic upcut miter saw with a 18" (450 mm) blade. It has 3 main parts; a 450 mm (18") carbide tipped saw blade, pneumatic twin horizontal & vertical clamps and air guns 2.2kW (3HP) Saw Motor Saw Blade RPM: 3000Rpm 450mm ...more

ATECH CRATER-06 A-700 Hydro-Pneumatic Miter Up-Cut SawHeavy duty upcut miter saw designed for straight and miter cuts of PVC (vinyl), aluminum extrusions and wood. 0-15- 22, 5- 30- 45- 60-75 Angle pin locks: -- 28" Blade cap.; (2) horizontal & (2) vertical pneumatic clamps for firm material control through the ...more

Used for cutting processes of aluminum, vinyl and wooden profiles., Hydro-Pneumatic cutting process, Secure cutting by the cover a safety sensor, Cutting speed adjustment based on the profile, Cutting at any desired angle between -45° and +45°, Cutting at -45°, -30°, -22.5°, -15°, 0° ...more

PRESSTA EISELE TS 350 Precision Semi-Automatic Upcut Miter Saw for PVC/Aluminum ProfilesGerman engineered precision semi-automatic cut-off miter saw designed to saw aluminum & uPVC profiles quickly, accurately and with a burr free mirror finish. Use of Ø350 mm saw blades with manual handling, Material ...more

Aslan 28″ Semi-Automatic Non-Ferrous Aluminum Upcut Saw, US1-700, Inventory # 8223, Model: US1-700, Cutting Angles: All angles from 0° to 75°, Saw Blade Diameter: 28″, Saw Blade Bore Diameter: 1.496″, Saw Blade Rotation: 3,000 RPM, Motor: 5.5 HP / 220v, 440v / 3ph, Standard s:, For cutting ...more

ATECH Crater-06 A (Pneumatic Miter Up-Cut) Cutoff Saw; Heavy-duty construction for long machine life. The moveable back fence enables you to cut bigger profiles on both straight and miter cuts.: -- 18" Blade cap.; pneumatic clamps provide firm holddown through cutting cycle. -- Solid, heavily constructed Cast Iron ...more

Used for cutting processes of aluminum, vinyl and wooden profiles., Hydro-Pneumatic cutting process, Secure cutting by the cover a safety sensor, Cutting speed adjustment based on the profile, Cutting at any desired angle between -45° and +45°, Cutting at -45°, -30°, -22.5°, -15°, 0° ...more

METEOR 700 Automatic Rising Blade Saw Ø700 mm with 3 m Roller Conveyor, Used for cutting processes of aluminum, plastic/vinyl, and wooden profiles., s Automatic rising blade cutting saw, Hydro-pneumatic cutting process, Secure cutting with protective cover a safety sensor, Cutting speed adjustment based on the ...more

Northtech UCS-14 L or R Up Cut Saw Max cutting capacity: 1" x 11", 2" x 10", 3" x 9" 7.5HP motor, 3PH 230V with 24V magnetic controls 14" 100T Carbide tipped blade included 1" Saw arbor diameter Cycle operation: Pneumatically adjustable up to 78 cycles/minute Arbor RPM: 4260RPM Table size: 25" x 23-1/4" Fence ...more

The Pat Mooney PMI-20 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics)., Mitre Capability: The PMI-20 is a turn table that allows set up of miter cut in seconds. A positive lock of the table is released and ...more

Aslan 18″ Semi-Automatic Non-Ferrous Aluminum Upcut Saw, CMS-504, Inventory # 8220, Model: CMS-504, Max. Profile Height: 6″, Max. Profile Width: 12″, Cutting Angles: All angles from -45° left to +45° right, Saw Blade Diameter: 18″, Saw Blade Bore Diameter: 1.18″ / 1 1/4″ ...more

2018 Scotchman SUP-600-NF Upcut Circular Cold Saw for Non ferrous Material, Blade Dia 24" Dimensions 55" L x 50" W x 65" H Weight 1465 lbs Spec Sheet Maximun Cutting Capacities (Non-Ferrous & PVC ):, Round 90°: 9", Square 90°: 8", Rectangle 90°: 15" x 6", Round 45°: 9", Square 45°: 7" ...more

The Pat Mooney PMI-20 is a semi-automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics)., Mitre Capability: The PMI-20 is a turn table that allows set up of miter cut in seconds. A positive lock of the table is released and ...more

Industrial Up Cut Saw, 14” blade.

SERIAL. 18659.000, NEW. 2004, MODEL. PRECUT FRONT END SELECT, CAPACITY. 48" WIDE, SHEAR BLADES. BOW TIE STYLE.

Brewco 8x10 Speed Cut Pop Up Saw, 10” infeed and 20” outfeed rolls, New 24” blade.

BACCI MASTER.CUT CNC Bandsaw with NC Router and ATC. The operating fields of the two units, (saw & router) are fully independent, allowing machining and cutting of the complete panel or multiple stacked panels. -- Manufacture’s : Cut size: 1,250 mm (49.2") cutting length capacity; 1,550 mm, ((61") loading ...more

CROSSCUT SOLUTIONS - CS18M: Mechanically Operated Cutoff Saw (right-hand; feed left-to-right) -- 2" x 12" Crosscut cap.; 7-1/2 HP TEFC motor with magnetic starter with: 110 Volt control voltage; standard cycle speed: 133 Cycles/Min; accepts: 18" Saw blade (not included). -- No compressed air required, which reduces ...more

CROSSCUT SOLUTIONS CS18P Pneumatic Upcut Saw: -- 2" x 12" Cross cut cap.; pneumatically operated cut-off saw; 7-1/2 HP TEFC motor with magnetic starter with 110 volt control voltage; adjustable cycle speed of up to 90 Cy/Min; accepts 18" saw blade (not included - add.$350 for 18" saw blade). -- NOTE: State right or ...more

CROSSCUT SOLUTIONS CS18M Mechanically-operated Cut-off Saw: -- 2" x 12" Crosscut cap.; 7-1/2 HP TEFC motor with magnetic starter with 110 volt control voltage; standard cycle speed of 133 cycles/Min; accepts 18" saw blade (not included). -- No compressed air is required which reduces your operating and installation ...more

SERIAL. 25598MODEL. H-460HAYEAR NEW. 2006 CAPACITY RECTANGLES. 20" X 18"CAPACITY ROUNDS. 18"BLADE SPEEDS. 65 TP 330 FPMPOWER ELEVATION. YESINDEXING LENGTH. 19.685"INDEXING CYCLE. 9 MAXIMUMBLADE DIMENSION. 215"X 1.6" X.050"BLADE TENSION. HYDRAULICBLADE FORCE VARAIABLE. HYDRAULICOPERATOR CONTROL CONSOL. YESCOOLANT. ...more

Make: Machitech, Model: Diamond Cut, Year: 2020, Machine Location: Upon Request, Cutting Table & Motion, Nominal cutting dimensions: 8’ x 12’, Positional accuracy: 0.002”, Max Traverse Speed: 1,800 IPM, Repeatability: 0.001”, Maximum table capacity: 4”, Space under gantry: 8.5” ...more

Make: FastCut CNC, Hypotherm, Model: Fast Cut Icon Elite Plasma Table with Water Bed and Hypotherm Power Max85, Year: 2020, Machine Location: Minnesota, Size: 5×10, Weight: 650 lbs, Motors: 500 oz-in stepper, Gearhead: 5:1 Planetary Gearbox, Guides: Dual drive linear guide system, Drive System: Precision linear ...more

SERIAL. 971120, MODEL. 1340G, NEW. 1997, SWING OVER WAYS. 13" SWING OVER CROSS SLIDE. 7-25/32" SWING IN GAP. 18-3/4", SPINDLE HOLE. 1-5/8" LENGTH OF GAP. 8" DISTANCE BETWEEN CENTER. 40" SPINDLE SPEEDS. (16) 42 TO 2000 RPM THREAD ENGLISH. (40) 4 TO 112 TPI THREADS METRIC.25 TO 6 MM PITCH FEEDS ENGLISH. (90).002 TO.14 ...more

Spindle Diameter. 5.12": 5.12", Spindle Taper. ISO #50: ISO #50, Cross Travel, X-Axis: 137.79", Vertical Head Travel, Y-Axis: 102.36", Column Longitudinal Travel, W-Axis: 55.11", Spindle Travel, Z-Axis: 27.55, Distance Between Spindle to Table: 0-102.36", Distance Spindle Nose to Table Center. 9.84"-90.55":, Spindle ...more

CAPACITY:, Swing Over Bed: 51.18", Swing Over Cross Slide: 38.58", Overall Bed Width: 47.24", Maximum Turning Length: 157.48", Maximum Weight Between Centers: 22,000 Lbs., Weight Capacity with 2-Steady Rest: 33,048 Lbs., X-Axis Travel: 32.08", Z-Axis Travel: 236.22", Spindle Speeds, 2-Ranges (Variable): 1-735 RPM ...more

CAPACITY:, Spindle Diameter: 5.12", Spindle Taper: ISO #50, Cross Travel, X-Axis: 137.79", Vertical Head Travel, Y-Axis: 125.98", Column Longitudinal Travel, W-Axis: 78.74", Spindle Travel, Z-Axis: 27.55", Spindle Speeds, 2-Speed: 35-3000 RPM, Built-In Rotary Table, B-Axis: 98.42" x 98.42", Table Weight Capacity: ...more

CROSSCUT SOLUTIONS CS14P Pneumatic Upcut Saw: -- 2" x 8" Cross cut cap.; pneumatically operated cut-off saw; 7-1/2 HP TEFC motor with magnetic starter with 110-volt control voltage; adjustable cycle speed of up to 90 Cy/Min; accepts 18" saw blade (not included - add $250 for 14" saw blade). -- NOTE: State right or ...more

80” X 150” Plasma Cutting System with Hypertherm Edge Connect Controller, Hypertherm HPR300 Plasma System and 5-Axis Full Contour Bevel Head., Table Size: 80” X 150”, Table Capacity: 4”, Clearance Under Gantry: 8.5”, Cutting Speed: 500 IPM, Max Speed Traverse: 1,800 IPM, INCLUDES: ...more

12" METALCUT MODEL 12RH HIGH SPEED AUTOMATIC CARBIDE BILLET COLD SAW, MODEL. 12" RH, NEW. 1973, CAPACITY - ROUNDS. 12", BLADE DIAMETER. 24" TO 40", BLADE SPEEDS. VARIABLE, 200 TO 600 RPM, SAW HEAD INFEED. HYDRAULIC, HEAD SLIDE GIBBING. 6 GIBS, FEED LENGTH PER STROKE. UP TO 36", DUAL CLAMPING. YES, HYDRAULIC, RUN ...more

SERIAL. AK104, NEW. 1981, MAXIMUM BAR DIAMETER. 1-3/4" LOW CARBON STEEL, MAXIMUM CUT LENGTH. 48", MINIMUM CUT LENGTH. 2 TIMES DIAMETER, VARIABLE SPEED PINCH FEED ROLLS. YES, ADC RACK FEED & BUNDLE DESCRAMBLER. YES, WILL ACCEPT TWO BUNDLES AT ONCE. YES, LENGTH OF BAR. 20' LONG (WILL ACCEPT LONGER BAR), FLYWHEEL ...more

SKU: 120258, Model: MCV-1100, Year: 2017, Condition: Used, S/N: 1723322000, Spindle Taper: ISO 40, Table Size: 1300 x 600 mm, Speed: 10000 rpm, CNC: Yes, Run Time: 693 hrs, Electrical :, Voltage: 220/440 volts, Phase: 3-phase, Amps: 90/45 amps, Dimensions: 80.00 (H) x 60.00 (W) x 85.00 (L) inches, Additional :, s, - ...more

SKU: 120260, Model: LT-65, Year: 2019, Condition: Used, S/N: 1915011153, Swing Over Ways: 20 ", Swing Over Carriage: 16 ", Electrical :, Voltage: 220 volts, Phase: 3-phase, Additional :, Swing over bed: 508mm (20"), Swing over cross slide: 407mm (16"), Maximum turning diameter with turret: 407mm ...more

20kw Falcon Cut 4-CHUCK, 40' TUBE LASER, The Falcon Cut is a cutting-edge, ALL-IN-ONE LASER PROFILING MACHINE that seamlessly blends German engineering and precision with outstanding versatility and speed., Designed to process a wide range of materials, including SQUARE TUBES, ROUND PIPES, FLAT BARS, I-BEAMS, ANGLES ...more

LHI Super Chop XL-15 Pneumatic Upcut Saw.Up-cutting saw with left-to-right or right-to-left operation (specify when ordering): -- 8-1/2" x 8-1/2" Cap., 26" dia. blade cap. (with 1" dia. tempered arbor), 15 HP BALDOR motor; (5 - 40) cycles/Min. -- Cap. with 26" blade: 1" x 24", 2" x 23-1/2", 3" x 22", 4" x 21", 5" x ...more

Enhance your machining capabilities with the used MAXICUT MLNC 9/32120 CNC flat bed lathe. Featuring a 33" swing, 120" machining length, 25" chuck size, and 30 hp power, this robust unit delivers precision with its Fagor 8055 Control system., Model: Maxcut MLNC-9/32120, Control: Fagor 8055 Control, Swing over bed: ...more

10' MAX WIDTH, 1/4" MAX THICKNESS, 30" FRONT OPERATED BACKGAGE, 18 HOLD DOWNS, 6' SQUARING ARM, POWER RAKE, 1980, 2 FRONT ARM SUPPORTS, FOOT PEDAL, BLADE LIGHT, 15 HP 230/460/60/3, 146" X 64" X 63" T APPROX., 11,000 LBS APPROX..

SERIAL.10113, MODEL. NT-CS18L, YEAR NEW. 2012, DIAMETER OF BLADE. 18", ARBOR. 1", AREA OF TABLE. 26" X 27", DADO DIAMETER. 8", CUT ENEVOLPE. 1" X 13" X 12" X 4", MAXIMUM THICKNESS. 5", BLADE TO GUIDE EDGE. 14", CYCLES PER MINUTE. 45, PASSLINE HEIGHT. 34", BLADE GUARD. YES, HOLD DOWN STYLE. T CLAMP, FENCE. YES, MOTOR ...more