Buy or Sell Your Chocolate Making Equipment
AI-ranked results for chocolate - closest matches first
fanuc a05b-2500-c003 plc backplane rack
iGAM | Detroit, MI
Category: Industrial Robot Attachments and Parts
Seller: iGAM
Location: Detroit, MI
This listing is for a USED FANUC A05B-2500-C003., Industrial PLC backplane rack with 4-slot configuration and dual fan cooling. Designed for use in FANUC host control systems. Replaces A05B-2500-C002. Fully tested and operational., See photos for., Part No: A05B-2500-C003, Type: PLC Rack / Backplane, Condition: USED ...more
fanuc a05b-2500-c003 plc rack backplane
iGAM | Detroit, MI
Category: Industrial Robot Attachments and Parts
Seller: iGAM
Location: Detroit, MI
This listing is for a USED FANUC A05B-2500-C003., Industrial PLC backplane rack with 4-slot configuration and dual fan cooling. Designed for use in FANUC host control systems. Replaces A05B-2500-C002. Fully tested and operational., See photos for., Part No: A05B-2500-C003, Type: PLC Rack / Backplane, Condition: USED ...more
2" Kusakabe, Tube Cutoff, single cut swing arm, tube guide, snubber, guards, brake, lube
National Machinery Exchange | Newark, NJ
Category: Tube and Pipe Cut Off Machines
Seller: National Machinery Exchange
Location: Newark, NJ
2" KUSAKABE TUBE CUTOFF, -, SWING ARM TYPE -SINGLE CUT, TUBE GUIDE, END STOP SNUBBER, GUARDS, DISC BRAKE, LUBRICATOR, MOTOR, DC DRIVE WITH COOLING FAN, O.D. 8'L X 76"W X 78"H.
4000 HP ABB in Ehouse, 11 KV MVSS
EMA Inc | Peachtree Corners, GA
Category: AC Variable Frequency Drives
Seller: EMA Inc
Location: Peachtree Corners, GA
Mfr: Abb
12.47KV, 4000HP Medium Voltage Soft Start in a 20FT Ehouse with HVAC for sale or rent. The MVSSS can be converted from 12.47KV to run on 13.8KV or 5KV..
180 MVA Furnace Transformer, 1995
VX Machinery | Sylvania, OH
Category: Electric Furnace Transformers
Seller: VX Machinery
Location: Sylvania, OH
Year: 1995
Three phase furnace transformer 188,000 KVA 60 HZ O.W. Cooling System 188 MVA In use for five years until it had a failure and was repaired but never reinstalled. Currently in storage, nitrogen blanket protected at all times, no oil..
10 KVA 2400 Primary, 120/240 Secondary, Eaton / Cutler-Hammer / Westinghouse, oil, outdoor, #LT4703
RESA Power Solutions | Cerritos, CA
Category: 60 Hz Single Phase Transformers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Eaton
Eaton Liquid Type Transformer, Pole Mount design, 10 KVA, 2400v Primary, 120/240v Secondary.
37.5 KVA 12000 Primary, 120/240 Secondary, Kuhlman, Oil, Outdoor, #LT3358
RESA Power Solutions | Cerritos, CA
Category: 60 Hz Single Phase Transformers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Kuhlman
Kuhlman Liquid Type Transformer, Pole Mount design, 37.500 KVA, 12000v Primary, 120/240v Secondary.
50 KVA 14400 Primary, 120/240 Secondary, Sunbelt Transformer, oil, outdoor, #LT4737
RESA Power Solutions | Cerritos, CA
Category: Single Phase Pole Mount Transformers
Seller: RESA Power Solutions
Location: Cerritos, CA
Sunbelt Transformer Liquid Type Transformer, Pole Mount design, 50 KVA, 14400v Primary, 120/240v Secondary.
75 KVA 480 Primary, 240 Secondary, Hammond Power Solutions Transformer, Stock #0313122
G-2000 | Toledo, OH
Category: 60 Hz Three Phase Transformers
Seller: G-2000
Location: Toledo, OH
Mfr: Hammond
MANUFACTURER:, HAMMOND POWER SOLUTIONS, HV:, 480, LV:, 240, KVA:, 75, COOLING:, AA, FREQUENCY:, 60 HZ, IMPEDANCE %:, 5.2, WINDING MATERIAL:, A1, Machine Type.Transformers Manufacturer.HAMMOND Model.N/A Year.N/A Condition.Used.
75 KVA 480 Primary, 240 Secondary, Hammond Power Solutions Transformer, AA, 60 Hz
G-2000 | Toledo, OH
Category: 60 Hz Three Phase Transformers
Seller: G-2000
Location: Toledo, OH
Mfr: Hammond
MANUFACTURER:, HAMMOND POWER SOLUTIONS, HV:, 480, LV:, 240, KVA:, 75, COOLING:, AA, FREQUENCY:, 60 HZ, IMPEDANCE %:, 5.2, WINDING MATERIAL:, A1, Machine Type.Transformers Manufacturer.HAMMOND Model.N/A Year.N/A Condition.Used.
2500 KVA 4160 Primary, 208 Secondary, Pullman Transformer, oil, outdoor, #LT4170
RESA Power Solutions | Cerritos, CA
Category: 60 Hz Three Phase Transformers
Seller: RESA Power Solutions
Location: Cerritos, CA
Pullman Transformer Liquid Type Transformer, Substation - Oil design, 2500 KVA, 13200v Primary, 208v Secondary.
3000 KVA 12470 Primary, 480Y/277 Secondary, Balteau, oil, outdoor, #LT4194
RESA Power Solutions | Cerritos, CA
Category: 60 Hz Three Phase Transformers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Balteau
Balteau Liquid Type Transformer, Substation - Oil design, 3000 KVA, 12470v Primary, 480Y/277v Secondary.
75 KVA 4160 Primary, 480Y/277 Secondary, Cooper, oil, outdoor, #LT2776
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Cooper
Cooper Industries (B-Line) Liquid Type Transformer, Pad Mount - Oil design, 75 KVA, 4160v Primary, 480Y/277v Secondary.
113 KVA 4160 Primary, 208Y/120 Secondary, Atlantic Power Systems, oil, outdoor, #LT4675
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Atlantic Power Systems
Atlantic Power Systems Liquid Type Transformer, Pad Mount - Oil design, 113 KVA, 12000v Primary, 208Y/120v Secondary.
Caterpillar CW34, Asphalt Paver, 2242 hours, S/N: AL300187, 2017
Warren Cat | Amarillo, TX
Category: Asphalt Pavers
Seller: Warren Cat
Location: Lubbock, TX
Mfr: Caterpillar
Model: CW34
Year: 2017
BALLAST, 30,800 LB, BASE, OPERATOR STATION, BELT, ENG, CANOPY, SUN, ROPS, COCOA MAT W/SCRAPER, CONTROL, OPTION, CONTROL, PREMIUM, ENGINE, TIER 4F/STAGE 4, INSTALLATION, ROPS, INSTRUCTIONS, ANSI, LANE 3 ORDER, LIGHTS, HALOGEN, MIRRORS, EXTERNAL, OIL, HYD, STANDARD, Online Owner's Manual, PACKING, CONTAINER, PRODUCT ...more
JUST ADDED!
731 cfm, 101 psi, Dual Atlas Copco #GA110-VSD+FF, Rotary Screw Compressors, VSD, w/ Receiver
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Atlas Copco
Model: GA110-VSD+FF
used atlas-copco compressor system. consists of (2) atlas copco model ga110vsd+ff screw compressors with 1,550 gallon vertical air receiver tank. variable speed drive. air-cooled. rated 731.1 cfm @ 101.5psi. 185 psi max. operating pressure 150 hp motor. sn ap1238666 and ap1238538. 3/60/460v. built 2023. 120 running ...more
General Electric Dual Pinion AG Ball Mill Electrical Drive System (NEW) Consisting of: (2) 7500 KW/ 10,000 HP 180 RPM Synchronous Motors
RAAR Group USA | Redondo Beach, CA
Seller: RAAR Group USA
Location: Redondo Beach, CA
Mfr: General Electric
GE Dual Pinion AG Ball Mill Electrical Drive System (NEW) Consisting of: (2) 7500 KW/ 10,000 HP, 180 RPM Synchronous Motors (Air Cooled), All Base and Sole Plates, Foundation Bolts, AC Field Panels, Conduit Boxes, Couplings, De Bearings, ODE Bearings, Rotors, Stators and Transformers (In Crates - Never installed).
Featured
Gator #GBS12, Fully Enclosed Shuttle Table, 12000 watts, 5' x 10'
Gator Fabrication Technology | Port Orange, FL
Category: CNC Lasers
Seller: Gator Fabrication Technology
Location: Port Orange, FL
Mfr: Gator
Model: GBS12
Year: 2025
CRAFTED IN USA, BUILT IN EUROPE, Model: 3015, Power: 12,000W, Laser Source; MAX, Laser Head: Raytool Auto Focus - SWITZERLAND, Gear and Rack: Framo Morat - GERMANY, Reducer: Framo Morat - GERMANY, Servo Motor: Kollmorgen Altra - USA, Electronic Components: Schneider - FRANCE, Pneumatic Components: CKD/SMC - JAPAN ...more
Novatec #NW-2000-NC, central dryer, 2000 lb/hr, 35 KW regeneration heater, 100°F to 375°F, Siemens Touch Screen DC-T Control panel
Arlington Machinery | Lake Zurich, IL
Category: Desiccant Air Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Novatec
Model: NW-2000-NC
Used 2,000 LB/HR Novatec Model NW-2000-NC Central Dryer Throughput Capacity: Approx. 2,000 LB/HR Approx. 35 kW Regeneration Heater Drying Temperature Range: 100°F to 375°F (38°C to 191°C) Dewpoint Capability: –40°F (40°C) 460/3/60, 66.9A Cooling Requirements: 45°F - 85°F Water, 25 ...more
25.5" X 25.5" X 3" Electric Platens & ndash; Cored For Cooling (qty 2)
Icon Industries, Inc | Grand Rapids, MI
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
OVERALL FRONT TO BACK DIMENSONS INCLUDING TERMINAL COVER IS 30.5". THE TERMINAL COVER IS 4.5" TALL SO 1.5" MORE THAN THE 3" PLATEN THICKNESS. 25.5" X 25.5" X 1.5" INSULATION INCLUDED (WHICH FITS WITH THE 1.5" DIFFERENCE IN THE TERMINAL COVER). SIX STRIP HEATERS (1000 WATTS; 220 VOLTS). CORED FOR OPTIONAL COOLING ...more
30.5" X 30.5" X 3" Electric Platen (qty 3)
Icon Industries, Inc | Grand Rapids, MI
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
SIXTEEN (16) \u00bd" DIA. CARTRIDGE HEATERS PER PLATEN. TWO (2) THERMOCOUPLES PER PLATEN. WATER COOLING PORTS \u00bd" NPT IN AND OUT ON ONE 32" SIDE. HEATED AREA 30 \u00bd" X 30 \u00bd". INSULATION AND SHEET METAL ON ALL FOUR SIDES. OVERALL DIMENSIONS: 32" L to R X 38" F to B. TWO PLATENS HAVE ADDITIONAL \u00bd" THICK ...more
1 Ton, Edwards #CF-0200-A, liquid chiller, 250-400 psi, R-12 refrigerant, 7475 BTUH
Soberay & Sons Ltd | Cleveland, OH
Category: Chillers
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Edwards
Model: CF-0200-A
One (1) Used Edwards Liquid Chiller, 1-Ton, Model CF-0200-A, 208/230 VAC, 250-400 PSI, Refrigerant R-12, Charge 4 LBS, 7475 BTUH, S/N 925922.
Frank Bacon #ITS-20000H-ST, Vibration System, 44,000 lbf (200 kN) Sine Force Rating
Frank Bacon Machinery Sales | Warren, MI
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank Bacon
ITS-20000H-ST Vibration Test System, Frank Bacon Model ITS-20000H-ST Vibration System, Sine Force Rating: 44,000 lbf (200 kN)Random Force Rating: 44,000 lbf (200 kN)Shock Peak Force Rating: 88,000 lbf (400 kN)Peak to Peak Displacement: 76 mm (3.00”)Frequency Range (Hz): 2 – 2,100 MaxArmature Diameter: 650 ...more
276 Ton, Thermax #TAC-L5-E1 Vapor Absorption Chiller, 970 kW, 166.5 cu. meters/hr chilled water circuit flowrate, 2019
Aaron Equipment Co | Schaumburg, IL
Category: Chillers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Thermax
Model: TAC-L5-E1
Year: 2019
used- thermax vapor absorption chiller, model tac l5 e1. 276 ton cooling capacity; 970 kw; 166.5 cubic meters/hour chilled water circuit flowrate; 276 cubic meters/hour cooling water circuit flowrate; 106 cubic meters/hour hot water circuit flowrate. components included: vfd's, hmi and sensors. oad: 15.5' l x ...more
Coker Waste Oil Thermal Cracker System, air cooled, 100K LPD (2 available)
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- coker waste oil thermal cracker system, rated 100,000 lpd capacity. including furnace, air-cooling condenser, pumps, vessels, and control system. our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Lyco #Clean Flow CKFF, Blancher, Stainless Steel, 7' Chamber, 40" infeed diameter, cooling to under 40°F, 460 V., 3-Ph.
Aaron Equipment Co | Schaumburg, IL
Category: Blanchers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Lyco
Model: CLEAN FLOW CKFF
Year: 2011
used- lyco blancher, model clean flow ckff. stainless steel. 7' chamber length. 40" infeed diameter. cool products to under 40 degrees f. cip system. on (4) legs. 3/60/460v. built 2011. previously used for food.
Stainless Steel, air cooled zone cooling tunnel, neoprene conveyor belt
Frain Industries | Carol Stream, IL
Category: Food Cooling Tunnels
Seller: Frain Industries
Location: Carol Stream, IL
Stainless Steel, air cooled, (2) zone cooling tunnel. Temperatures and number of product per hour – depending on materials, application and machine configuration. 50" wide x 4¼" high aperture, (1) 365" long stainless steel cooling chamber. Neoprene conveyor belt with an infeed / discharge ...more
Featured
3 Ton, Lennox #Enlight Hi Efficiency Rooftop AC Unit Gas Pack Heating 208/230v 3Ph R410A New Unused 2023 LGT036
UPE Equipment and Supplies LLC | Fulshear, TX
Seller: UPE Equipment and Supplies LLC
Location: Houston, TX
Mfr: Lennox
Model: ENLIGHT
Year: 2023
We are a real company in Houston, Texas. These units are in our warehouse you can come and inspect 6 Days a week, 346-402-0400 Call 6 Days a week 7:30am -8:30pm no Sunday calling, 3 Ton Lennox Enlight Rooftop AC High Efficiency Unit Gas Pack Heating 208/230v 3Ph R410A 2023 New Unused 2023 Model # LGT036H4EQIY Serial # ...more
750 KVA, 13200Y/7621 Primary, 480 Secondary Cutler-Hammer #DS81470001, Dry Type Transformer, 3ph
Quantum Technology | Shippensburg, PA
Category: 60 Hz Three Phase Transformers
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Cutler-Hammer
Decommissioned in good working order from water treatment plant.750KVA Cutler-Hammer DS81470001 Dry Type Distribution Transformer 3phPower Rating: 750 kVA (kilovolt-amperes), indicating the maximum power it can handle.Voltage: It is designed to take a high voltage of 13,200Y\/7621 volts and step it down to a low ...more
270 cfm, 100 psi, Atlas Copco #ZT245, Air Compressor, Air Cooled, 55.5" width x 57" H x 112" L Size, 60 HP, 3600 RPM, 230/460 V
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Atlas Copco
Model: ZT245
Used Atlas Copco air compressor model ZT245. 60 HP, 270 cfm, 100 psi maximum. Air cooled. 3600 rpm, 230/460 volt. 112" long X 55-1/2" wide X 57" high., ATLAS COPCO ZT245.
60" x .125" Bronx, combination tension stand & crop shear
Galaxie Corporation | Wayne, MI
Category: Tension Stands
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Bronx
Machine# 12354, Serial# 201286, Thickness Range:.018"-.125", Rotary Drag / Board Design, Entry Drag Board Pad, Air Blader, Hydraulic Open-Close, 62" Width, Dual Wichita Water Cooled Brakes, Neopreme Rolls, Exit Crop Shear, Up Cut Design.
Cat 962, Wheel Loader, 1357 hours, S/N: MT200223, 2023
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Wheel Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Hobbs, NM
Mfr: Caterpillar
Model: 962
Year: 2023
0P0720, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER, ED, AXLES, MAN/OPEN, SGR, AOC,JSTK, CAB, DELUXE, STRG JOYSTICK, CAMERA, DEDICATED REAR VIEW, CAT CERTIFIED USED, COOLING CORES, 9FPI, COUNTERWEIGHT, STANDARD, Engine, FAN, STANDARD, FENDERS, ROADING, FILTRATION, STANDARD, GUARD ...more
10 HP Hydac #TBM0704, hydraulic power system, 420 V., 3-phase, coolant, 2012
Machinery Central | Louisville, KY
Category: Hydraulic Power Units
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Hydac
Year: 2012
, HYDAC TBM0704 10HP Hydraulic Power System, 2012, used for 1 year. Includes cooling system, 420v, 3 ph, 60 cycle. Previously operated with a 22 TON PEE-WEE P20.8G CNC AC cold-forming thread roller., Spec Sheet:, HYDAC 10 HP Hydraulic Power System with Cooling System, 420v, 3 ph, 60 cycle, Used in a 22 TON PEE-WEE ...more
26" x 84" Farrel mill roll, front roll, cored for cooling, 17" bushing journals, 15" connecting gear journal, smooth surface
Soberay & Sons Ltd | Cleveland, OH
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 26" x 84" Mill Roll, front roll, cored for cooling, 17" bushing journals, 15" connecting gear journal, smooth surface, NOTE: 27T connecting gear in picture has been sold.
MTU, radiator cooling package for up to 3000 KW diesel, take off MTU 20 V 4000 genset, low hours, 2008
Diesel-Powered.com | East Earl, PA
Category: Industrial Radiators
Seller: Diesel-Powered.com
Location: East Earl, PA
Mfr: Mtu
Year: 2008
Stock#: IERA-153-MT Year: 2008 Hours: 500 Hours Make: MTU Kilo Watts: Rating: To Cool up to 3000 kW Length: 85" Width: 117" Height: 130" Weight: 7000 lbs Condition: Low Hours.
2000 KVA 4160 Primary, 480Y/277 Secondary, MGM Transformer, oil, outdoor, #LT4774
RESA Power Solutions | Cerritos, CA
Category: 60 Hz Three Phase Transformers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Mgm
MGM Transformer Liquid Type Transformer, Substation - Oil design, 2000 KVA, 4160v Primary, 480Y/277v Secondary.
75 KVA 4160 Primary, 208Y/120 Secondary, Balteau, oil outdoor, #LT4193
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Balteau
Balteau Liquid Type Transformer, Pad Mount - Oil design, 75 KVA, 4160v Primary, 208Y/120v Secondary.
Featured
1728 cfm, 100 psi, Gardner Denver #VST225-260A, rotary screw air compressor, 300 HP, variable speed, 2016
Surplus Solutions Llc | Fanwood, NJ
Seller: Surplus Solutions Llc
Location: Houston, TX
Mfr: Gardner Denver
Model: VST225-260A
Year: 2016
Low-Hour Gardner Denver VST225-260A Two-Stage Variable Speed Rotary Screw Air Compressor System, Like New Condition - Extremely Low hours 1630 hours. ( 90%+ life remaining), Maintenance Note:, The unit is currently running perfectly over the last month of December 2025 into Jan 2026. However, upon inspection in ...more
Wayne, lab strand pelletizing downstream equipment, 30" L x 16" width x 24" Deep strand cooling tank
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wayne
Wayne Strand Pelletizing Downstream Equipment 30" L x 16" W x 24" Deep Strand Cooling Tank Integrated Compressed Air Powered Air-Knife, S/N 8142 2" Wide Pelletizer, 1.5HP DC Motor, 230/1/60 24" Diameter Sweco Classifier, 2 Decks, 1/4 HP, 230/1/60 Previously Running Fluoropolymers(Teflon) Approximate Dimensions: Water ...more
Eagle #EF, Hybrid Laser Welder, 1500 Watt, 220 V., 2024
Revelation Machinery | Chicago, IL
Category: Laser Welding Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Eagle
Model: EF
Year: 2025
Make: Eagle, Model: EF Hybrid, Year: 2025, Machine Location: California, Output Power: 1500W, Power Requirement: 220V, Maximum Power Consumption: 6KW, Power Adjustment Range: 5%-100%, Fiber Core Diameter: 20um/30um/50um, Output Fiber Length: 394“, Laser Welding Depth: 1mm-3mm, Laser Cooling Water Temperature: ...more
Buehler Specimen #10-1010, 230/460 V., 3-phase, extra holding vise, 5-extra diamond wheels, coolant, S/N 218-C-2437
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Cutoff Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Buehler
Model: 10-1010
BUEHLER SPECIMEN SAW, MODEL 10-1010, S/N 218-C-2437, 1 1/2 HP, 230/460 VOLTS 3 PHASE, COOLANT SYSTEM, EXTRA HOLDING VISE, 5 EXTRA DIAMOND WHEELS, EXCELLENT CONDITION, LISTING ID#25558.
4.7" Davis Standard #120MM45CT, Single Screw Extruder, 30:1 L/D Ratio, water cooled, 200 HP
Revelation Machinery | Chicago, IL
Category: Extruders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Davis Standard
Model: 120MM45CT
Year: 1900
Make: Davis Standard, Model: 120MM45CT, Year: 1900, Machine Location: Illinois, -Screw Diameter: 120 mm, -L/D Ratio: 30:1, -Electrically Heated, -Water Cooled, -Motor: 200 HP, -Temperature Control Panel.
60" x 480" Sandvik, Belt Flaker
Federal Equipment Company | Cleveland, OH
Category: Flakers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Sandvik
Used 60" wide x 40' long Sandvik cooling belt flaker, approximately 32' cooling section, smooth belt with circulation system, belt driven by approximately 3 hp motor drive, end mounted motorized chopper pin roll breaker discharge, driven by approximately 5 hp motor drive, job# 15618.
Application Engineering Company #TCU1500UQ, Water Cooled Heater, (2) pumps, 208-230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Water Heaters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Application Engineering Company
Application Engineering Company (AEC) water cooled heater, temperature controlled unit, Model TCU1500UQ, Serial number 34E5552. Unit has computer screen with digital readout, 208-230/460 V, 3-phase. Heater is water cooled with heat exchanger, has (2) pumps., Basis: FOB.
Brookfield #DV-II + PRO, Viscometer, digital read out w/ touchpad controls, temperature probe, 115 Volts, 1PH
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Brookfield
Model: DV-II
one(1) used Brookfield Viscometer, Model DV-II + PRO Model no. DV-II + PRO Serial number RTP73750 Digital Readout with touchpad controls Jacketed tooling for cooling Single phase, 115 voltage Includes Temperature Probe With stand, adjustable height.
Complete Recycling System, 8 lane, Satake Evo RGB 8 Optical Sorter, Starlingo Visco Star
Revelation Machinery | Chicago, IL
Category: Recycling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Year: 1900
Make: Generic, Model: Recycling System, Year: 1900, Machine Location: Upon Request, Complete Recycling Line, -(x2)Satake Color Sorter Model SM11-8101E, -Number of Lanes 8, -Cameras, 1. CCD Sensors, 2. Monochromatic Sorting- light or dark simultaneous sorting, 3. Optical Resolution 0.38, – Rejects Include ...more
1000 KVA 14400 Primary, 480Y/277 Secondary, ABB, oil, outdoor, #LT4768
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Abb
ABB Liquid Type Transformer, Pad Mount - Oil design, 1000 KVA, 14400v Primary, 480Y/277v Secondary.
2500 KVA 4160/2400 Primary, 480/277Y Secondary, Sunbelt, padmount transformer, 3-phase, LF 65C ONAN 30/60kV BIL TMPRPRF
Delta Wye Inc | Toronto, ON
Seller: Delta Wye Inc
Location: Toronto, ON
Mfr: Sunbelt
Year: 2001
Allow 2-3wks for testing/shipping prep, 6% impedance, ONAN, LF polymer bushings, customizations available, $50,000 USD / $68,900 CAD, Contact for rental options and ready-to-ship Substations/Padmounts/Distribution/Autotransformers, available in voltages up to 44kV & +10MVA.
Featured
Federal Pacific, substation transformer radiator banks, OLTC-AUTO, 4 with Fans
Crimson Ventures & Consulting Llc | Plainview, TX
Category: Electrical MRO Components & Parts
Seller: Crimson Ventures & Consulting Llc
Location: Lubbock, TX
Mfr: Federal Pacific
Model: OEM RADIATOR BANKS OLTC-AUTO 60/80/100 MVA AUTO-TR
"Complete set of 11 original OEM radiator banks removed from a Federal Pacific Electric (FPE) OLTC-AUTO 60/80/100 MVA 3-phase auto-transformer (serial 70168-1, built for City of Lubbock Holly Plant). • 8 plain steel finned banks • 3 banks with factory ONAF cooling fans, motors & guards (all spin freely ...more
JUST ADDED!
FMX (FactoryMation) TD400-4005-3PH VFD New
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
This FMX Tough Drive TD400 Series AC drive is a compact and easy-to-use variable frequency drive designed for three-phase motor applications. It s a simple front keypad with a built-in speed control knob, making basic operation and adjustments straightforward without extra equipment., This unit is rated for ...more
4.6" x 18" x 12" Bliss/United, 4 HI 1 Stand rolling mill, hydraulic expansion
D & H Machinery Inc | Toledo, OH
Category: 4 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
-Work Roll Diameter: 5.140" - 4.600", -Backup Roll Diameter: 18", -Width Range: 1.5" - 12", -Entry Gauge Thickness: 0.010" to 0.215", -Exit Gauge Thickness: 0.010" to 0.205", -Entry ID: 16"/20", -Exit ID: 20", -Entry and Exit OD: 72", -Mill Direction: Right to Left, Consisting of the following:, -Entry L-Type Coil ...more
Kool Star, Refrigeration Condenser, Air Cooled, R-404A, 15 Ton, 15 HP, 208/230/460 V, dual fan
Machinery & Equipment Co | Brisbane, CA
Category: Air Cooled Condensers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kool Star
Kool-Star Refrigeration Condenser, 15 Ton Capacity - An air-cooled unit designed for use with R-404A refrigerant. Includes dual fans powered by a 15 HP motor (208/230/460V, 3-phase) with an on/off switch. Type VBII., Tonnage: 15, Basis: FOB, Cooling: Air Cooled, Refrigerant: R-404.
36" x 84" Scholz, 254 psi, 302°F, indirect steam heat, water cooled, 1986
Bondtech Corp. | Somerset, KY
Category: Autoclaves
Seller: Bondtech Corp.
Location: Salisbury, NC
Mfr: Scholz
Year: 1986
Interior Dimensions:36.5” ID x 84” Long, Maximum Pressure:254 PSI, Maximum Temperature:302 Deg. F., Heat Source:Indirect Steam Heat, National Board:Certified, # 108, Date of Manufacturing:1986, CoolingWater Cooled (Tower), Electrical controls and RecordersControls with Chart Recorder, Fan:Electric fan and ...more
500 psig shell, 150 psi tubes, Thermal Transfer Products, Shell & Tube Heat Exchanger, 2-Pass, 5" diameter x 24" L Shell housing
Cooper Industries Llc | Millwood, WV
Seller: Cooper Industries Llc
Location: Millwood, WV
ITEM 16333: Unused THERMAL TRANSFER PRODUCTS Heat, Exchanger – EKF Series, 2-pass, design. Copper-nickel alloy tube, material. Cast iron bonnet, material. Hot oil in / Cooled oil out, (2″Ø SAE 4-bolt hydraulic flanges)., 1″ FNPT cooling water in/out connections. The carbon steel shell housing ...more
60 HP MTS #505.150, Hydraulic Power Unit, 150 GPM, 3000 psi, 2002
Frank Bacon Machinery Sales | Warren, MI
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Year: 2002
180GPM MTS 505.180 SilentFlo Hydraulic Power Unit, 180GPM MTS 505.150 Hydraulic Power Unit, Model: 505.150 (Upgraded to 505.180), Serial Number: 1387111, Flow (GPM): 180 (567 l/min), MFG Date: 12/2002, Pressure (PSI): 3,000 (207 Bar), Motor: 60 HP (6Total), Voltage Requirements (V, Hz, Ph, A): 460, 60, 3, 388 ...more
3.5" Gloucester #35250R2, single screw extruder, 32:1 L/D, 65" centerline height, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 35250R2
used- gloucester model 35250r2 3.5" diameter single screw extruder. 3.5" diameter screw, 32:1 l/d. has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is ...more
JUST ADDED!
Applied Materials (AMAT) Liquid Cooled High Voltage Resistor Assembly W3T497605
MRO Exchange | Fairfield, IL
Category: Resistors
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Applied Materials
A liquid cooled high voltage assembly bearing part number W3T497605. The unit carries a DANGER HIGH VOLTAGE label on its top surface and is constructed around an aluminum finned heatsink structure with multiple stacked red silicone insulating layers separating the heat dissipation sections. Two black insulating ...more
7.6 Ton, MTA #TAE-EVO-081, Chiller, air cooled, R407c refrigerant, 20 hp pump, 460 volts, 3 phase, serial# 2200175359, built 2011
Federal Equipment Company | Cleveland, OH
Category: Chillers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Mta
Model: TAE-EVO-081
Used 7.6 ton MTA chiller, model TAE EVO 081, air cooled, R407c refrigerant, 20 hp pump, 460 volts, 3 phase, serial# 2200175359, built 2011.
170 Ton, York #YLAA0170, Air Cooled Chiller, R454B, 460 V., 2024
LEL Critical Equipment | Spartanburg, SC
Category: Chillers
Seller: LEL Critical Equipment
Location: Spartanburg, SC
Mfr: York
Model: YLAA0170
Year: 2024
170 Ton York Air Cooled Chiller – 2024 York YLAA0170 The 2024 York YLAA0170 Air-Cooled Chiller is a high-performance, eco-conscious cooling solution, engineered for commercial applications requiring reliable, efficient temperature control. With a 170-ton cooling capacity, this chiller is ideal for a wide range ...more
Liquified Gas Treating Unit (propane, butane, water) for 153K BPD, Crude Oil Stabilization Plant, w/ storage tanks
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- liquified gas treating unit (id 9300) for 153 kbpd crude oil stabilization plant consisting of: liquid propane treating incl. (6) propane adsorbent beds, shell & tube propane coolers. liquid butane treating incl. (6) butane adsorbent beds, shell & tube butane coolers. water treatment unit incl. water ...more
25 Ton, Brown Boveri, Electric Melt Furnace, Power Draulics #72002B, Water Coolant, Centrifugal Pumps, 1989
VX Machinery | Sylvania, OH
Category: Electric Arc Furnaces
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Brown Boveri
Year: 1989
Capacitor Module with Switchgear-Hydraulic Tiling System with Power Draulics #72002B Hydraulic Power Unit - Water Cooling System with Baltimore #VXI703XR Water Coolant Tower 3 Aurora #3M 2" x 2.5" x 9" Centrifugal Pumps with 30 HP Motor - Westinghouse 3250/3640-KVA. 12,470 Volt to 1600 Volt Substation Transformer ...more
Marshall & Williams, Welex co-extrusion sheet line
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Marshall & Williams
Used Co-Extrusion Sheet Line by Marshall & Williams / Welex. s 1.5" and 2.5" extruders, 7-layer Cloeren co-ex block, 28” flex lip die, and Marshall & Williams sheet extrusion stack. Ideal for acrylic resins and color concentrates., Co-Ex Sheet Extrusion Line Consisting of the Following:, 1.5" Davis ...more
Caterpillar CW34, Pneumatic Tired Compactor, 701 hours, S/N: AL300376, 2019
Fabick Cat | Fenton, MO
Category: Pneumatic Tire Rollers
Seller: Fabick Cat
Location: De Pere, WI
Mfr: Caterpillar
Model: CW34
Year: 2019
****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, 23W03899, BALLAST, 59,400 LB, BASE, OPERATOR STATION, BELT, ENG, CANOPY, SUN FOR ROPS, CLEAN EMISS MOD- T4F, COCOA MAT W/SCRAPER, CONTROL, PREMIUM, Engine, ENGINE, TIER 4F, FRAME, STANDARD MACHINE, INSTALLATION, ROPS ...more
200 Ton, Greenerd #HC-200-60Y38, C-frame hydrauic press, downstroke type, 60" x 38" bed, 1980
Kempler Machinery | Elk Grove Village, IL
Seller: Kempler Machinery
Location: Elk Grove Village, IL
Mfr: Greenerd
Model: HC-200-60Y38
Year: 1980
200 Ton Greenerd Model HC-200-60Y38 Open Gap C-Frame Hydraulic Press, 18" str., 24" DL, 50" x 29" bed, 4-post guided slide, ejector, #89564., 139" high with cooling unit.
Multiquip VP MVH508, Vibratory Plate Compactor, S/N: H10154, 2023
Wheeler Machinery | Salt Lake City, UT
Category: Vibratory Tandem Rollers
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Model: VP MVH508
Year: 2023
AIR-COOLED, SINGLE-CYCLINDER, CENTRIFUGAL FORCE: 14,613 LBS, HATZ DIESEL, MULTIQUIP, OPERATING WEIGHT: 1182 LBS., PRICED 07/29/24 KR, REVERSIBLE VIBRATORY PLATE, Y0" X 35" PLATE, YOMPACTION DEPTH: UP TO 40".
1500/2700 KVA 4160 Pri. 480Y/277 Sec., Virginia Transformer
IC Spares | Los Angeles, CA
Category: Control Power Transformers
Seller: IC Spares
Location: Los Angeles, CA
Model: VIRGINIA
Year: 2021
1500 kVA transformer for immediate sale., Manufacture: Virginia Transformer, kVA: 1500/2700, Phase: 3, Hertz: 60, Indoor Air-Cooled, Remanufactured: 2021 with test report.
Stainless Steel APV plate evaporator system with separator vessel, vacuum pump, 2006, S47209
Perfection Global | Elk Grove Village, IL
Category: Rising Falling Film Evaporators
Seller: Perfection Global
Location: Hainesport, NJ
Mfr: Stainless
Year: 2006
Inlet: 2,250 lb/hr, 20° Brix @ 68° FEvaporation: 1,675 lb/hrConcentrate: 575 lb/hr, 78° Brix @ 140° FUtilities Hot Oil: 110 GPM 215°F Inlet to 185°F OutletCooling Water: 85°F Inlet to 100°F OutletTo Condensor: 190 GPMPotable Water: 10 GPM (Rinse)Electric: 10.5 HP.
Caterpillar 972M, Wheel Loader, 9035 hours, S/N: A7800425, 2020
Ohio Cat Heavy Machinery | Broadview Heights, OH
Category: Wheel Loaders
Seller: Ohio Cat Heavy Machinery
Location: Richwood, KY
Mfr: Caterpillar
Model: 972M
Year: 2020
972M WHEEL LOADER, ANTIFREEZE, -34C (-29F), AXLES, MANUAL/OPEN, ED, BKTA GP ST 129" 6.25YD3 PO, CAB TRIM, DELUXE (LHD), CAP GP, RAIN, CLEAN EMISSIONS MODULE, COOLING CORES, 9 FPI, COUNTERWEIGHT, 2300KG, ENGINE AR-COMPL, FAN, STANDARD, FENDERS, BASIC +, FILTRATION, STANDARD, GUARD, POWERTRAIN, HOOD, NON-METALLIC ...more
14.5 Ton, TempTek #OACS-15S-M1-1P, central water chiller, dual 3 HP process pump, 2011
Absolute Machinery Corp | Worcester, MA
Category: Chillers
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Temptek
Model: OACS-15S-M1-1P
Year: 2011
Model: OACS-15S-M1-1P, Cooling Capacity Us Tons: 14.5, Capacity Gallons: 68, Process Pump: Dual 3 HP, Process Pump Gpm: 36, Voltage: 460/3/60.
Cryomech, Water Chiller, 2 GPM, 208/230 V, 26 Amps, 334 hours
Machinery & Equipment Co | Brisbane, CA
Category: Chillers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cryomech
Cryomech Refrigerated Water Chiller, Serial CP560500010 - Provides 2 GPM water flow. 208/230V, 3-phase, 60 Hz, 26 Amp service. Air-cooled, electric, and portable with 334 hours of usage., Gallons per Minute: 2, Basis: FOB.
Complete Brewhouse / Microbrewery for beer
Eurolux Gmbh | Karlstadt-karlburg, EU
Category: Complete Food Processing Plants
Seller: Eurolux Gmbh
Location: Karlstadt-karlburg, EU
Price on request:, m.lamprecht@eurolux.de +49 176-93263486 More brewerys / brew houses are here https://eurolux.de/seite/brauerei, ed :, Small brewhouse, microbrewery, pub brewery, craft brewery with 10 hl brewing volume, This brewhouse is NEW, Technical, Technical data:, Energy consumption - electricity, gas, water ...more
Miller #Coolmate-3, Water Coolant System, 3 gallon Reservoir, 500 Amps, 115 V
iGAM | Detroit, MI
Seller: iGAM
Location: Detroit, MI
Mfr: Miller
Model: MILLER #COOLMATE-3
The MILLER Coolmate 3 is a used 3-gallon water coolant system specifically engineered to support water-cooled TIG and MIG welding torches in high-amperage applications. With a 500-amp cooling capacity, this durable and compact unit is ideal for demanding welding operations that require consistent thermal regulation. ...more
Union Process, Attritor Tank, 1S, 8" ID, 10.5" deep, includes front pour spout, Jacketed for cooling, Bottom drain with grate
Ingalls Process Equipment | Painesville, OH
Category: Attritors
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Union
one(1) used 1S Union Process Attritor Tank. 8" inside diameter 10.5" deep includes front pour spout Jacketed for cooling Bottom drain with grate. teflon extended piece factory attached. Split aluminum covers Looks like it is unused.
250 cfm, 100/110 psig, Sullair #LS-12-50L-ACAC, 50 HP, air cooled, 1995
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Sullair
Model: LS-12-50L-ACAC
Year: 1995
(1) Used 50 HP Sullair Screw Type Air Compressor, 50 HP, Maax Air Pressure Rated: 100 - 110 PSIG, Max CFM: 250, Air Cooled, 27,588 hours, 50 HP, Maax Air Pressure Rated: 100 - 110 PSIG, Max CFM: 250, Air Cooled, 27,588 hours.
Cat 982M, Wheel Loader, 17315 hours, S/N: MK610136, 2018
Fabick Cat | Fenton, MO
Category: Wheel Loaders
Seller: Fabick Cat
Location: Milwaukee, WI
Mfr: Caterpillar
Model: 982M
Year: 2018
**ATTACHMENTS PICTURED ARE, 982M WHEEL LOADER, 982M WHEEL LOADER AM-N DCA8, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AUTODIG & CPM PAYLOAD READY, AUTOLUBE, AXLES, OPEN/OPEN, ED, AOC, BE INCLUDED IN THE PRICING**, BUCKET-GP, 142 IN. 9.25YD3, CAB, DELUXE, CERT EMISSIONS, EPA TIER 4, COOLING CORES, 9 ...more
Kady mill, Stainless Steel rotor stator design, Stainless Steel cooling coil, lubrication system, 30 HP, 230/460 V.explosion proof motor, #38682
Federal Equipment Company | Cleveland, OH
Category: Mills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Kady
Model: 38682
Used 30 HP Kady mill, stainless steel rotor stator design, stainless steel cooling coil, lubrication system, 230/460 volt, XP motor.
Automated Downstream Equipment Stainless Steel spray cooling tank, 15' length, 11" x11" cross section
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Automated Downstream
Used 15' Automated Downstream Equipment stainless steel spray cooling tank. Has 11" x 11" cross section, 15' total length. Includes heat exchangers and filter. No pump included. Includes blower and air knife for drying cooled product., AUTOMATED DOWNSTREAM EQUIPMENT 15'.
40 HP MTS #505.20, Hydraulic Power Supply, 3000 psi, 20 GPM, 440/460 V., 2006
Frank Bacon Machinery Sales | Warren, MI
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
Year: 2006
20GPM MTS 505.20 Hydraulic Power Supply MTS Model 505.20, Model: 505.20, Serial Number: 10221576, Assembly Number: 100-009-559 Rev A, Flow (GPM): 20.0 (75.5 l/min), MFG Date: 09/2006, Pressure (PSI): 3,000, Motor: 40 HP, Voltage Requirements (V, Hz, Ph, A): 440-460, 60, 3, 53.1, Cooling: Water Cooled Heat Exchanger ...more
Bosch #S-CH-S, High Speed Heavy Duty Continuous Band Sealer, seal bulk bags @ 30-75 ft./min., 230 V
Aaron Equipment Co | Schaumburg, IL
Category: Sealers and Sealing Systems
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Bosch
Model: SCH-S
used- bosch model s-ch-s high speed heavy duty continuous band sealer. designed to seal bulk bags at speeds from 30 - 75 feet per minute. capable of handling heat sealable films up to 8 mil. gusseted / coated woven poly propylene can be used. has a direct logics 405 plc controls, 4 pair of heater bars, two pair of ...more
Multiquip PM 2 TRShut Height, S/N: 2TH-29760, 2021
Wheeler Machinery | Salt Lake City, UT
Category: Centrifugal Pumps
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Model: PM 2 TRSH
Year: 2021
AIR-COOLED, 4-CYCLE, HONDA GASOLINE ENGINE, MAX. DISCHARGE: 211 GPM, OPERATING WEIGHT: 96 LBS, PRICED 08/05/25 KP, SINGLE CYLINDER, 4.8 HP, TRASH PUMP 2".
1000 KVA 4160 Primary, 600Y/347 Secondary, Markham Electric Limited
RS Breakers And Controls | Mississauga, ON
Category: 60 Hz Three Phase Transformers
Seller: RS Breakers And Controls
Location: Saskatoon, SK
Mfr: Markham Electric Limited
Year: 1990
1000KVA 4160 Primary, 600Y/347V Secondary, Liquid Filled, ONAN, 5kV Insulation Class, Quality: Used, Quantity: 1, Pricing and pictures are available upon request.
1000 KVA 13800 Primary, 600Y/347 Secondary, Pioneer Transformers
RS Breakers And Controls | Mississauga, ON
Category: 60 Hz Three Phase Transformers
Seller: RS Breakers And Controls
Location: Saskatoon, SK
Mfr: Pioneer
Year: 2004
1000KVA 13.8kV Primary, 600Y/347V Secondary, Connection: ∆-Y, ONAN, Liquid filled, Quality: Used, Pricing and pictures are available upon request.
225 KVA 2400 Primary, 208Y/120 Secondary, General Electric, Oil, Outdoor, #LT3547
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: General Electric
Electric Liquid Type Transformer, Pad Mount - Oil design, 225 KVA, 2400v Primary, 208Y/120v Secondary.
500 KVA 4160 Primary, 208Y/120 Secondary, Balteau, Oil, Outdoor, #LT3927
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Balteau
Balteau Liquid Type Transformer, Pad Mount - Oil design, 500 KVA, 4160v Primary, 208Y/120v Secondary.
2500 KVA 12000 Primary, 480Y/277 Secondary, RTE, Oil, Outdoor, #LT4688
RESA Power Solutions | Cerritos, CA
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Rte
Rural Transformer & Equipment Co. Liquid Type Transformer, Pad Mount - Oil design, 2500 KVA, 12000v Primary, 480Y/277v Secondary.
Laserman, 40 width Co2 Air Cooled Focused Light Engraving System, 10" x 10", 2019, 2019
Revelation Machinery | Chicago, IL
Category: CNC Lasers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Laserman
Model: NA
Year: 2019
Make: Laserman, Model: NA, Year: 2019, Machine Location: New York, 40 W Air Cooled Sealed Co2 Laser, Scan Lab Scangine 14 Scan Head, 360mm Focal Length 10″ Square Engraving Field Lens, Power Supply and System Control Electronics, System Controlled Computer, Fle Laser Mark Software License and Dongle, Welded ...more
Vytek/LSM Laser Cleaning System, Demo Unit, Pulsed Laser
Vytek Laser Systems | Fitchburg, MA
Category: Laser Cleaning Systems
Seller: Vytek Laser Systems
Location: Fitchburg, MA
Mfr: Vytek
Model: LSM LASER CLEANER
Restore, prep, and clean with precision. The Vytek LSM Laser Cleaning System removes rust, paint, oil, and oxides with zero abrasives, chemicals, or mess—just fast, contact-free cleaning using laser light., Machine Type: Laser Cleaning SystemManufacturer: VytekModel: LSM pulseCLEAN laserYear: 2024Condition: Demo ...more
JUST ADDED!
Biesse Rover #1224-FT, CNC Router, 5' 12' table, air cooled, 24000 RPM, 2022
Carolina Machinery Sales | Monroe, NC
Category: CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: 1224-FT
Year: 2022
Infeed lift table, Outfeed table, X Axis Travel: ~144” (12′), Y Axis Travel: ~60” (5′), Z Axis Travel: ~6” – 8” (verify exact configuration), Table Size: 5′ x 12′ Flat Phenolic Table, Work holding: 2 Vacuum hold-down system, Main Spindle: 12 HP HSD Electrospindle ...more
Cat 972M, Wheel Loader, 12293 hours, S/N: A8P00260, 2014
Ziegler Cat - Used | Minneapolis, MN
Category: Wheel Loaders
Seller: Ziegler Cat - Used
Location: Minneapolis, MN
Mfr: Caterpillar
Model: 972M
Year: 2014
6 NEW INJECTORS AT 12,293 HOURSEROPSA/C & HEATERLIGHTSRADIOSTROBEHIGH AMB COOLIINGENG COOL HTRETHER AIDPROD LINKRIDE CONTROL2 VALVE HYDSHEATED SEATAUTO DIFFS26.5 X 25 TIRES5.75 CY PIN ON GP BUCKET, 26.5 X 25 TIRES, 2V, 5.75 CY PIN ON GP BUCKET, 972M, AUTO DIFFERENTIALS, ENGINE COOLANT HEATER, EROPS - HEATER & ...more
JUST ADDED!
40" Werner & Pfleiderer #ZSK-50-MCC, Twin Screw Extruder, w/ Side Feeder, 920-1056 RPM, 34432 hours, 2000
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK-50-MCC
Year: 2000
used coperion werner & pfleiderer zsk 50 mcc twin screw extruder 40mm high-speed compounding system with side feeder, co-rotating, (2) 40 mm diameter side by side screws, 54:1 l/d ratio, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. driven by a 181 kw (242.72hp) - 470 volt dc ...more
8.6" width x 8.6" D x 22.8" H Environmental Test Chamber for universal testing machines, new
Frank Bacon Machinery Sales | Warren, MI
Category: Environmental Chambers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
New FB-280DT Environmental Test Chamber for Universal Testing Machines New FB-280DT Environmental Test Chamber for Universal Testing Machines, • Temperature Range: -80°C up to +280°C, • Stainless Steel Body, • Internal Dimensions, (w x d x h) 220 x 220 x 580mm (8.6 x 8.6 x 22.8 in), • ...more
24" width x 24" D x 24" H Thermotron #S-8-3800, temperature test chamber, -70° to 177, 208 V., 3Ph, 22 amps., 3800 programmer
LR Environmental Equip Co | Los Angeles, CA
Category: Environmental Chambers
Seller: LR Environmental Equip Co
Location: Los Angeles, CA
Mfr: Thermotron
Model: S-8-3800
Thermotron Temperature Test Chamber, Model #S-8-3800, I.D. 24" X 24" X 24", O.D. 43" X 50" X 79", Temperature Range: -70 to +177 Deg. C - Water Cooled, Rate Of Change:, Cooling +180C to -54C 35 Min. 6 Deg. C Per Minute, Thermotron Model #3800 Programmer, Has Viewing Window, Interior Light, Castors, 1 Shelf, 2X 5.75" ...more
Thermo, Recirculating Chiller, R134A, 1.8 liters reservoir, 3.3 GPM, 5-35°C, 2156 width, 208/230 V.
Machinery & Equipment Co | Brisbane, CA
Category: Chillers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Thermo
Thermo "NESLAB" Recirculating Chiller, Type Merlin M75. Unit has a temperature range of 5 degrees Celsius to negative 35 degrees Celsius with a cooling capacity of 2156W. Unit uses R134A refrigerant with a reservoir volume of 1.8 Liters (0.5 Gallons). Flow rate of approximately 3.30 gallons per minute. Driven by ...more
75 HP CompAir Kellogg #1S350PUAS, Air Compressor, Oil/Air Cooling, 300 cfm, 100 psi, 55 kW, 230/460 V
Perry Videx LLC | Hainesport, NJ
Category: Rotary/Sliding Vane Air Compressors
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Compair
Model: 1S350PUAS
Used Compair Kellogg "Hydrovane 350" model 1S350PUAS air compressor. Serial #3S33142. Approximately 200 cfm at 125 psi. With 55 kW, 208/416 230/460 volt drive. Oil/air cooling., COMPAIR KELLOGG 1S350PUAS.
16" diameter x 21' long, Conveyor Mfg, Stainless Steel, 2-screw, CIP, horizontal, cooling jkt, top cover, 2 @ 10 HP, unused, #1272829
Plantex Equipment Co | Alvin, TX
Category: Screw Type Conveyors
Seller: Plantex Equipment Co
Location: Alvin, TX
Model: CONVEYOR MFG
Year: 2015
Multiquip VP MVH408, Vibratory Plate Compactor, S/N: J-10210, 2024
Wheeler Machinery | Salt Lake City, UT
Category: Vibratory Tandem Rollers
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Model: VP MVH408
Year: 2024
20" X 35" PLATE, AIR-COOLED, SINGLE-CYCLINDER, CENTRIFUGAL FORCE: 12,365 LBS, HATZ DIESEL, MULTIQUIP, OPERATING WEIGHT: 933 LBS., PRICED NEW 01/19/24 KR, REVERSIBLE VIBRATORY PLATE.
32" x 408" Sandvik, Stainless Steel Belt Flaker, 24' Cooling Area, 3 HP
Perry Videx LLC | Hainesport, NJ
Category: Flakers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sandvik
Used 32" x 34' Sandvik Stainless Steel Belt Flaker, Manufacturer: Sandvik, Dimensions: 32" wide x 34' long, Material of construction: stainless steel, Additional information: 24' of cooling area; 3 hp chill roll drive, 3 hp belt drive; pinch rollers feed in system; 301 stainless steel contact parts ...more
Cat 972-14, Wheel Loader, 1423 hours, S/N: FFB00506, 2020
NMC - Heavy Machinery | Omaha, NE
Category: Wheel Loaders
Seller: NMC - Heavy Machinery
Location: Omaha, NE
Mfr: Caterpillar
Model: 972-14
Year: 2020
972 14A WHEEL LOADER, Air Conditioner, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), Auto Lube, Auto Shift, AUTOLUBE, STD, AXLE OIL COOLER READY, ED, AXLES, AUTO/AUTO, SGR, JSTK, BKTA GP AB 132" 7.0 YD3 PO, Bucket, CAB, PREMIUM, STRG JOYSTICK, COOLING CORES, 6FPI, Counterweight, COUNTERWEIGHT, AGGREGATE ...more
Cat 980, Wheel Loader, 583 hours, S/N: WFX01353, 2024
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Wheel Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Aurora, CO
Mfr: Caterpillar
Model: 980
Year: 2024
2628 BW 2/4/26, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AUTOLUBE, STD, Axle Oil Cooler, AXLES, OPEN/OPEN, AOCR, BKTA GP ST 137" 7.0YD3 PO, CAB, PREMIUM, STRG JOYSTICK, CAT CERTIFIED USED, COOLING CORES, 9 FPI, COUNTERWEIGHT, AGGREGATE, CUTTING EDGE, BOLT-ON & CG, Engine, FAN, STANDARD, FENDERS ...more
MTS #506.52, Hydraulic Power Supply, 55 Gpm
Frank Bacon Machinery Sales | Warren, MI
Category: Hydraulic Power Units
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Mts
55 GPM MTS 506.52 Hydraulic Power Supply, (1) USED MTS Model 506.52 55 GPM 3,000 PSI Hydraulic Power Supply., MTS Model 506.52, Model: 506.52, Serial Number: 0409442, Flow (GPM): 55, Mfg Date: 06/1998, Pressure (PSI): 3000, Motor (HP, RPM): 100, 1770, Voltage Requirement (V, Hz, Ph, A): 460, 60, 3, 119, Water Cooled ...more
