Buy or Sell Your 10 Foot Power Squaring Mechanical Shears
AI-ranked results for 10' power squaring mechanical shears - closest matches first
16 gauge x 52" Pexto #152-J, stomp shear, 60" x 72" floor space
Wheeler Machinery Sales | Pomona, CA
Category: Foot Shears
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pexto
Pexto 152-J 52" Stomp Shear #7501 #1, Capacity: 16 Gauge Mild Steel, Shearing Length: 52", Floor Space: 60" x 72", Dimensions: 60" x 34" x 42" H, Weight: 1000 lbs., Max Thickness (gauge): 16 gauge, Length of Blade: 52".
150 GPM @ 18' TDH, Durco #2K2X2X10, Stainless Steel, D20 Alloy, 20 HP, 2" x 2" x 10" impeller, 1800 RPM, mechanical seal with lubricator, #37438
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Durco
Model: 2K2X2X10
Used Durco Centrifugal Pump, Model 2K2X2X10, D20 Alloy, 2" x 2" x 10" impeller, rated 150 GPM @ 18' head at 1800 RPM, mechanical seal with lubricator, on base with 20 H.P. 230/460 volt drive, XP, Serial No. 457950.
JUST ADDED!
1/4" x 12' Accurshear #625012, CNC hydraulic shear, 20 SPM, 36" Back Gauge, Accurshear SC2 Backgauge Control, support arms, foot pedal, 1999
Manufacturing Solutions | Santa Ana, CA
Category: CNC Power Squaring Shears (Inch)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Accurshear
Model: 625012
Year: 1999
144"1/4"32"20 SPM (full stroke), 46 SPM (min. stroke)36"171" x 87" x 84"H22,000 lbs..
Scotchman #DO70, ironworker, 70 ton dual operator, with angle shear, 2003
Mid Atlantic Machinery | Harrisburg, PA
Category: Ironworkers
Seller: Mid Atlantic Machinery
Location: Harrisburg, PA
Mfr: Scotchman
Model: DO70
Year: 2003
70-ton dual operatorOptions or Upgrades, comes with an angle shear.
1.5 HP Chemineer #30DNT, Agitator Drive, mechanical seal, 27" L Stainless Steel shaft w/prop blade, serial #556382, 2006, #45887, 2006
Federal Equipment Company | Cleveland, OH
Category: Agitator Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Chemineer
Model: 30DNT
Year: 2006
Unused Chemineer agitator drive, model 30DNT, 1.5 hp air operated motor drive with mechanical seal, approximately 27" long stainless steel shaft with prop blade, serial# 556382, new 2006.
4" x 4" x 1/2" Geka #Bendicrop-85S, universal hydraulic ironworker, 93 ton, 12" throat, NEW
Smith Machinery Co | Ames, IA
Category: Ironworkers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Geka
Model: BENDICROP-85S
Punching Station:, Capacity: 93 US Tons, Ø1-1/2” in 1/2”, Maximum Round Punch that can be held Ø1-9/16”., Optional Attachments up to 4” and 6” are available., Throat Depth: 12”, Working Height: 43””, Safety:, • 2 Stage foot pedal with low pressure on ...more
120 Ton, HTC #10FM120, mechanical, 10' overall, front operated power back gauge, 6" stroke, 11.5" open height, 5.5" Shut Height, foot pedal
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Mechanical Press Brakes
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Htc
Model: 10FM120
HTC MACHANICAL PRESS BRAKE, MODEL: 10FM120, S/N: 1177W743, 120 TONS X10 FT, FRONT OPERATED POWERD BACKGAUGE, 6" STROKE, OPEN HEIGHT: 11 1/2", SHUT HEIGHT: 5 1/2", FOOT PEDAL, 15 HP, 220/440 VOLTS THREE PHASE, WEIGHT: 23,100 LBS., LISTING ID#25539.
Otinus, 5/16" x 13.2' Hydraulic Guillotine Shear
Otinus Corp | Bloomingdale, IL
Category: Guillotine Shears
Seller: Otinus Corp
Location: Bloomingdale, IL
Mfr: Otinus
OTINUS SPECIAL OFFER: 0% LEASING! Don't wait for a better moment – it's now. Otinus machines with financing at no extra cost. A straightforward offer: you only pay the cost of the machine. Optimize your taxes in 2026 and choose reliable equipment. Contact us to find out more!, Maximum cutting capacity for carbon ...more
Uniflow #RPDS2, Rotary Positive Displacement Pump, Stainless Steel, Rubber Rotor, w/Mechanical Seal, 2" Inlet/Outlet, 7.5 HP, 575 V, On Wheels
Perry Videx LLC | Hainesport, NJ
Category: Positive Displacement Pumps
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniflow
Model: RPDS2
Used Uniflow model RPDS2 stainless steel rotary positive displacement pump. 2" inlet/outlet. Standard cover. Rubber rotor. Mechanical seal. 7.5 HP, 575 volt motor with V-belt drive. Portable, on wheels. S/N 86200725., UNIFLOW RPDS2.
Siemens GEB131.1E Rotary Air Damper Actuator, AC 24 V, 3-Position, 15 Nm, 150 s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GEB131.1E Rotary Air Damper Actuator, AC 24 V, 3-Position, 15 Nm, 150 s - Siemens GEB131.1E Rotary Air Damper Actuator, AC 24 V, 3-Position, 15 Nm, 150 sWith self-centering shaft adapter for shaft dia. 6.4.20.5 mm, square 6.4.13 mm, min. shaft length 20 mmWith position indication and adjustable mechanical ...more
2 Hp Drive Assembly (from De Dietrich Mdl
Perry Videx LLC | Hainesport, NJ
Category: Glass Lined Parts
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: De Dietrich
Used 2 HP drive assembly (from De Dietrich MDL. CTJ-50, 50 gal. Glass lined reactor), 2 HP drive 3/60/460 volt, 1735 rpm, mechanical seal., 1981 DE DIETRICH 2 HP.
Siemens GBB161.1E Rotary Air Damper Actuator, AC 24 V, DC 010 V, 25 Nm, 150 s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GBB161.1E Rotary Air Damper Actuator, AC 24 V, DC 010 V, 25 Nm, 150 s - Siemens GBB161.1E Rotary Air Damper Actuator, AC 24 V, DC 0.10 V, 25 Nm, 150 sWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and adjustable mechanical limit ...more
Siemens GCA121.1E Rotary Air Damper Actuator, AC/DC 24 V, 2-Position, 18 Nm
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GCA121.1E Rotary Air Damper Actuator, AC/DC 24 V, 2-Position, 18 Nm - Siemens GCA121.1E Rotary Air Damper Actuator, AC/DC 24 V, 2-Position, 18 Nm, Spring Return 90/15 sWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and adjustable ...more
4" x 4" x 1/2" Corner universal standard dual hydraulic angle shear
D & D Industries Inc | Monclova, OH
Category: Angle and Bar Shears
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Universal
MODEL: HD2-MTI-NC, SERIAL #: 68813, 6" x 6" CORNER NOTCHER VERTICAL, 2" STROKE, MODEL: HD2-MTI, SERIAL #: 1664601, 4" ANGLE SHEAR HORIZONTAL, 3" STROKE, FOOT PEDAL, EXTERNAL HYDRAULIC UNIT, GOOD CONDITION.
10 Ton, Enerpac #0010, portable C-frame hydrualic shear, cycle timer, 1993, #12411
Yoder Machinery Sales | Holland, OH
Category: Single End Punch and Shear Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Enerpac
Model: 0010
Year: 1993
SHEAR CYLINDER SERIAL #A4193C, POWER UNIT SERIAL #4593C, SHEAR CYLINDER MODEL #RC-104, POWER UNIT MODEL #PER3305B, NEW IN 1993, SHEAR CYLINDER CAPACITY. 10 TONS, SHEAR CYLINDER STROKE. 4.13", C-FRAME SHEAR THROAT. 3-1/2", MAXIMUM C-FRAME SHEAR OPENING. 1-1/2", HYDRAULIC TANK CAPACITY. 5 GALLONS, MAXIMUM OPERATING ...more
4" x 4" x 1/4" Edwards, Ironworker, 55 Ton, 2020
Revelation Machinery | Chicago, IL
Category: Ironworkers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Edwards
Year: 2020
Make: Edwards, Model: 55 Ton, Year: 2020, Machine Location: Wyoming, PUNCH, Rating: 55 Tons, Max Capacity: 1-1/16″ Dia in 5/8″ A36, Stroke: 1-1/4″, Throat Depth: 7-1/2″, Open Height: 8-1/8″, Shut Height: 6-7/8″, Work Height: 36-9/16″, ANGLE SHEAR, Max Capacity:, 3″ x ...more
Niagara #31RC, Circle Shear, 10 gage, 60" squaring blank, 78" octagonal blank, 3" diameter cutter, 100 FPM
National Machinery Exchange | Newark, NJ
Category: Ring and Circle Shears
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Niagara
Model: 31RC
, MAXIMUM CAPACITY (MILD STEEL). 10 GAGE, CIRCLE DIAMETER FROM SQUARE BLANKS (MIN-MAX). 6"-60", CIRCLE DIAMETER FROM OCTAGONAL BLANKS (MIN-MAX). 6"-78", SLITTING GAGE RANGE. 7/8" - 17-1/4", THROAT, CUTTERS TO FRAME. 18-1/2", THROAT OF CIRCLE ARM. 43", DIAMETER OF CUTTERS. 3", CIRCUMFERENTIAL SPEED OF CUTTERS. 100 FPM ...more
6" Cylinder, Balemaster, 30 HP, mechanical rebuild 2022
Global Equipment International | Chalfont, PA
Category: Recycling Equipment
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Balemaster
Balemaster Model 4030G-6 Open Door Baler, 30HP Motor, 6" Cylinder, 27" x 32" infeed chute, 29" x 36" out feed interior opening, Unit had Cylinder, Frame, and Other Parts Reconditioned in a mechanical rebuild in 2022, Manufacturer BALEMASTER Model 4030G-6 Condition Used Stock Number 904577PF.
3" x 3" x 3/8" Peddinghaus #Peddiworker-50, hydraulic ironworker, 50 ton
Generation Machine Tools | Sarasota, FL
Category: Ironworkers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Peddinghaus
Model: PEDDIWORKER-50
PEDDINGHAUS 50 Peddiworker 50 Ton Hydraulic Ironworker#7568, PEDDINGHAUS 50 Peddiworker 50 Ton Hydraulic Ironworker#7568, Reference #7568, Model # Peddiworker 50, Serial # 4061357689007, Capacity pressing force- 50 Ton, Flat bar- 6” x 5/8”, 90° shear- 3” x 3/8”, Round bar capacity- ...more
1/4" x 13' Ermak #HVR-4100-6, hydraulic CNC shear, 13.8" throat, 14-22 SPM, 39.4" Back Gauge, 18 holddowns, squaring arm, support arms, foot pedal
Manufacturing Solutions | Santa Ana, CA
Category: CNC Power Squaring Shears (Inch)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermak
Model: HVR-4100-6
156".25"21.65"14-2239.41813.837.4"15 hp1 hp327 x 92 x 92"h22,600 Lbs..
Bemco, 800 Ton, 5.25"round, 75 HP, s/n #115-03-76, 1979
D & D Industries Inc | Monclova, OH
Category: Bar and Billet Shears
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bemco
Year: 1979
MODEL #: 800 TON, SERIAL #: 115-03-76, YEAR: 1979, CATALOG :, DUAL TONNAGE CAPABILITY, MAXIMUMS BASED 0N 65 TO 70,000 P,S,I, SHEAR STRENGTH MATERIAL, HIGH CAPACITY- 800 TONS, ROUND 5-1/4" MAX, SQUARE 4-3/4" MAX, RECTANGLE 2" x 6", 15 STROKES /MIN FOR SLUG LENGTH (INCLUDES FEED TIME), LOW CAPACITY - 400 TONS, ROUND ...more
170 HP Komatsu #SAA6D102E-2, Engine, warranty, 2005
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Komatsu
Model: SAA6D102E-2
Year: 2005
Complete Good 2005 Komatsu Saa6d102e-2 Diesel Engine, Turbocharged, Mechanical Fuel System, Bosch Inline Injection Pump, Cpl 8267, Removed From A Komatsu Wa320-5-Wheel Loader, 171 Hp At 2000 Rpm, Complete As Pictured. Excellent Running Engine, Offered Exchange Plus $500.00 Refundable Core Deposit With 100 Day Limited ...more
1/4" x 10' U.S. Industrial #US1025CNC, CNC Hydraulic Shear, 126" Sheet, 0.75"-36" Back Gauge, 14/min No Load Strokes, 15 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: CNC Power Squaring Shears (Inch)
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: U.S. Industrial
Model: US1025CNC
U.S. Industrial 10′ x 1/4″ Hydraulic Shear, USHS10250, Inventory # 3366, Model: USHS1025, Max. Thickness:, Mild Steel: 1/4″, Stainless Steel: 1/8″, Max. Cutting Length: 10′, Tensile Strength of Mild Steel: 65k PSI, Tensile Strength of Stainless Steel: 95k PSI, No Load Strokes: 14 /Min. ...more
JUST ADDED!
4" x 4" x 1/4" Hill-Acme #3, Metalworker, 33 ton, 12-1/2" throat, 1" stroke, 5 HP
Norman Machine Tool Ltd | Baltimore, MD
Category: Ironworkers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Hill-Acme
Model: 3
Hill Acme 33 Ton Ironworker, No. 3, Inventory # 10001, Model: No. 3, S/N: 476053, Punching Capacity:, Tons: 33, Max. Diameter Thru Thickness: 1 1/16″ thru 3/8″ tk, Diameter Thru Max. Thickness: 13/16″ thru 1/2″ tk, Depth of Throat: 12 1/2″, Length of Stroke: 1″ Max., Shearing ...more
3/8" x 10' Accurshear #63710, CNC hydraulic shear, 21-44 SPM, 30 HP, 1" x 3" x 124" knife, 16 holddowns, 2009
Manufacturing Solutions | Santa Ana, CA
Category: CNC Power Squaring Shears (Inch)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Accurshear
Model: 63710
Year: 2009
120"3/8" Mild Steel32"21 SPM (full stroke), 44 SPM (short stroke)30 HP230V, 3 PH1" x 3" x 124" (4-edged)16.
JUST ADDED!
120" x 1/4" Baykal #HGL-3100/6, hydraulic swing beam shear, 20 SPM, 30" Back Gauge, 15 HP, (2) 20" front support arm, 39" front squaring arms, Cybelec CybTouch 6, 2016
Westway Machinery Ltd | Mississauga, ON
Category: Plate Shears
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Baykal
Model: HGL-3100/6
Year: 2016
S:, Front Operated Cybelec CybTouch 6 ControlFront Squaring Arm 39”, with flip over stopFront Support Arm (2), 20”Swing Beam DesignRapid Blade Gap AdjustmentAdjustable Stoke LengthElectric Foot PedalRear Side Guards with Light Curtain, MODEL: HGL 3100 x 6, CAPACITY: 10’ x ¼” (50,000 ...more
14 gauge x 12' GMC #HS-1214M, Hydraulic Shear, 12 SPM, 18" throat, 24" Back Gauge, 10 HP, 2025
Revelation Machinery | Chicago, IL
Category: Power Squaring Shears (Gauge)
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Gmc
Model: HS-1214M
Year: 2025
Make: GMC, Model: HS-1214M, Year: 2025, Machine Location: California, Cutting capacity:, Mild steel 12’ x 14 Ga., Stainless steel 12’ x 18 Ga., soft aluminum 12’ x 10 Ga., min. thickness 22Ga, Blade length 12′, Strokes per minute 10-12, Throat depth 18″, Worktable height 34 1/2″ ...more
Piranha #P50, ironworker, 50 ton, #16267
Vander Ziel Machinery Sales | Alto, MI
Category: Ironworkers
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Piranha
Model: P-50
Piranha 50 Ton Ironworker, Model P-50, Serial # 7076, Asset # 16267, Throat Depth 8”, Open Height 13 ½”, Closed Height w/o Blocks 9 ¼”, Stroke Length 4 ¼”, Platen Table 10” x 17”, Punch 50 Tons, Max. Material 13/16” – ¾”, Plate Shear 15 ...more
5" x 5" x 3/8" Mega, Piranha #MW35, hydraulic ironworker, 35 ton, electric foot pedal, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Ironworkers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Mega
Model: MW35
SERIAL., MODEL. MW35, PUNCHNG CAPACITY, TONNAGE. 35 TON, ANGLE SHEAR CAPACITY. 5" X 5" X 3/8", THROAT DEPTH. 7", ANGLE SHEAR. 3" X 3" X 5/16", ROUND BAR SHEAR (MIN. TO MAX.). 11/4" TO 1-3/8", SQUARE BAR SHEAR (MIN. TO MAX.). 1/2" TO 1", PLATE SHEAR, BLADE LENGTH. 13", PLATE SHEAR (MIN. TO MAX.). 5/8" X 6" TO 1/4" X ...more
12 gauge x 4' Pexto #12-U-4, shear, rear operated manual back gauge, 9 hold downs, full length foot treadle, 3 HP, 62 SPM, 1965
Smith Machinery Co | Ames, IA
Category: Power Squaring Shears (Gauge)
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pexto
Model: 12-U-4
Year: 1965
Capacity (Mild Steel): 12 Gauge, Capacity (Stainless Steel): 14 Gauge, Max Cutting Length: 48" (Nominal), Strokes Per Minute: 62 SPM, Number of Hold Downs: 9, Back Gauge Range: 24", Front Gauge Range: 36", Rake Angle: 3/8" per Foot, Motor: 3 HP / 1800 RPM, Electrics: 480V / 3 Phase / 60 Hz, Rear Operated Manual ...more
1/4" x 13' Accurl #MS8 MasterCut, CNC Guillotine Shear, Delem DAC360T CNC Control, Back Gauge, light curtain, 2023
Revelation Machinery | Chicago, IL
Category: CNC Power Squaring Shears (Inch)
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Accurl
Model: MS8
Year: 2023
Make: Accurl, Model: MS8-8X4000, Year: 2023, Machine Location: Upon Request, Cutting Capacity (M/S 50kg/mm2):.314″, Cutting Capacity (S/S 70kg/mm2):.196″, Cutting Length: 157″, Rake Angle: 0.5°~2.2, Blade Gap: 0.002″ ~ 0.031″, Throat Depth: 4.75″, Working table height: ...more
3" x 3" x 5/16" Metal Muncher #MM40, hydrauic ironworker, 40 ton, 7" throat, 5 HP, 1999
Yoder Machinery Sales | Holland, OH
Category: Ironworkers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Metal Muncher
Model: MM40
Year: 1999
SERIAL. 054540399, MODEL. MM40, YEAR NEW. 1999, PUNCHING CAPACITY. 40 TONS, MAXIMUM HOLE DIAMETER THROUGH. 7/8" X 1/2" PLATE, DEPTH OF THROAT. 7", SHEAR CAPACITY LENGTH. 14", ANGLES @ 90 DEGREES. 3" X 3" 5/16", ROUNDS. 1", SQUARES. 1", FLATS. 5/8" X 6" THRU 1/2" X 13", STROKES PER MINUTE. 40 @ 1/2 STROKE, STROKES ...more
2" x 2" x 1/4" Roper Whitney Pexto #455, Combination Angle Iron Shear, Notcher, Bender
Mullin Machinery | Farmingdale, NJ
Category: Ironworkers
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Pexto
Model: 455
Product Roper Whitney Pexto No. 455 Combination Angle Iron Shear, Notcher, BenderShear Capacity- 2″ x 2″ x 1/4″, Weight- 200 lbs, Blades are in good shape. Overall a good working unit..
4" x 4" x 3/8" Scotchman #50514-CM, hydraulic, 50 ton, punch, bar shear, notcher, #24581
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Ironworkers
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: 50514-CM
(NEW) SCOTCHMAN HYDRAULIC IRONWORKER, MODEL: 50514-EC, STANDARD S, 50 Ton Punch Station, Keyed Punch Ram For Safety, 2" Die Holder, Punch Nut With Wrench and Stripper, One Round Punch & Die: Maximum Diameter 1", Adjustable Electric Stroke Control With Scale, Electric Remote Foot Pedal, 14" Flat Bar Shear With ...more
5" x 5" x 1/2" Piranha #PII-65, Ironworker, 65 ton, 11" x 38" platen surface, S/N 312, 2002, PII-65
Smith Machinery Co | Ames, IA
Category: Ironworkers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Piranha
Model: PII-65
Year: 2002
PUNCHING Max 1-1/16" thru 3/4" thick material or 65 tons Platen Surface 11" x 38" Capacity 65 tons COPING/NOTCHING 3 1/2" X 5" X 3/8" BLADE PLATE SHEAR 18" X 1/2", 12" X 3/4", 8" X 1" ANGLE SHEAR 5" X 5" X 1/2", Pre-Owned PIRANHA Ironworker, The PIRANHA PII-65 is a powerful and reliable ironworker, perfect for various ...more
1/4" x 13' Ermak #HVR-4100-6, hydraulic CNC shear, 40" Back Gauge, 18 holddowns, 13.8" throat, 14-22 SPM, squaring arm, support arms, foot pedal, Ermak Touch Screen Control
Manufacturing Solutions | Santa Ana, CA
Category: CNC Power Squaring Shears (Inch)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermak
Model: HVR-4100-6
156".25"21.65"14-2239.41813.837.4"15 hp1 hp327 x 92 x 92"h22,600 Lbs..
JUST ADDED!
6" x 6" x 1/2" Scotchman #12012-24M, Hydraulic Ironworker, 120 ton, 24" bar shear, 12" throat depth, 2.25" punch stroke, 47 SPM, 5 HP, 460 Volt, 1996
Naab Sales Corporation | Blaine, MN
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Scotchman
Model: 12012-24M
Year: 1996
Scotchman 12012-24M 120 Ton Hydraulic Ironworker w/ Attachments, Make: Scotchman, Model: 12012-24M, Serial Number: 50508M496, New in: 1996, Punch Capacity: 120 Ton, Throat Depth: 12”, Universal Open Tooling Station, 24” Bar Shear: 1” x 12” Cap., ½” x 24” Cap., Punch Station: ...more
Worthington #3CNG84, Stainless Steel Centrifugal Pump, Split Casing, Mechanical Seal, Direct Coupled, 4" x 3", 10 HP, 220/440 V, On Base
Perry Videx LLC | Hainesport, NJ
Category: Centrifugal Pumps
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Worthington
Model: 3CNG84
Used Worthington 3CNG84 stainless steel centrifugal pump. 4" X 3". Split casing, outboard bearings, mechanical seal. On base, direct coupled to 10 HP 220/440 volt motor. Mfr. Serial #A209405., WORTHINGTON 3CNG84.
Siemens GIB131.1E Rotary Air Damper Actuator, AC 24 V, 3-position, 35 Nm, 150 s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GIB131.1E Rotary Air Damper Actuator, AC 24 V, 3-position, 35 Nm, 150 s - Rotary air damper actuator, AC 24 V, 3-position, 35 Nm, 150 sWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and adjustable mechanical limit stopButton for ...more
Piranha, ironworker, 480 V.
SOMINN Machinery Sales | Dodge Center, MN
Category: Ironworkers
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Piranha
PIRANHA (USED) MODEL P-3 IRONWORKER, 8" THROAT DEPTH, PUNCH, - 50 TONS, - 13/16 THRU 3/4" MAX MATERIAL, - 5" THRU 1/8" MAX HOLE SPECIAL TOOL, PLATE SHEAR, - 14-5/8" LONG, - 1" X 4", - 3/4" X 10", - 5/8" X 14", ANGLE SHEAR, - 5" X 5" X 3/8", - ...more
6" x 6" x 1/2" ACME #6A, Hydraulic Ironworker, 105 Ton, 24" Throat, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Ironworkers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acme
Model: 6A
SERIAL. 896A-108-01, MODEL. 6A, PUNCHING CAPACITY. 105 TONS, PUNCHING SIZE. 1-5/16" HOLE THUR 1" THICK, DEPTH OF THROAT. 24", ANGLE SHEARING. 6" X 6" X 1/2", PLATE. 1/2" X 21" TO 3/4" X 10", ROUNDS. 2-1/4", SQUARES. 2", TEES. 4" X 4" X 1/2", COPING CAPACITY. 3-1/4" X 3-1/4" X 1/2", NOTCHING CAPACITY. 3-1/4" X 4-1/2" X ...more
3" x 3" x 3/8" Piranha #P50, 50 ton, mechanical hold down, punch holder, set of angle knives, 5" throat, 3 HP, new, #SMP50
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Piranha
Model: P50
Punch Capacity 50 Ton Hole Size (Max. Material) 13/16" (3/4") Max. Hole Size (Material) 3" (3/16") Throat Depth 5" Closed Height w/o Die Block 7-3/4" Open Height 11-1/2" Stroke Length 3-3/4" Platen Table Size 8" x 16" Blade Length 13" Plate Shear Capacity 3/4" x 6" Angle Shear Capacity 3" x 3" x 3/8" Coper Notcher ...more
6" x 6" x 1/2" Hill-Acme #6, hydraulic ironworker, 95 ton, #14712
Yoder Brothers Machinery | Toledo, OH
Category: Ironworkers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Hill-Acme
Model: 6
Weight10500 pounds, SERIAL. 8006-024-06, MODEL. 6 PUNCHING CAPACITY. 95 TONS PUNCHING SIZE. 1-1/4" HOLE THUR 7/8" THICK DEPTH OF THROAT. 24" ANGLE SHEARING. 6" X 6" X 1/2" PLATE. 1/2" X 14" TO 1-1/8" X 6" ROUNDS. 2-13/16" SQUARES. 2" COPING CAPACITY. 3-1/4" X 3-1/4" X 1/2" NOTCHING CAPACITY. 3-1/4" X 4-1/2" X 1/2" ...more
Scotchman #6509, Hydraulic Ironworker, 65 ton, 24" Bar Shear, Angle Shear, Punch, 5 HP, Reconditioned
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Ironworkers
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: 6509
SCOTCHMAN HYDRAULIC IRONWORKER, MODEL: 6509, SERIAL NUMBER: 5658FF297*, *Reconditioned December 2025, Capacity: 65 Ton, Punch: 1-1/16 In 3/4", Throat Depth: 9", Flat Bar Shear: 24", 1" x 6", 3/4" x 8", 1/2" x 12", 3/16" x 24", Angle Shear, 90 Degrees: 6" x 6" x 3/8", 5" x 5" x 1/2", Angle Shear, Miter Angle 45 ...more
Siemens GIB161.1E Damper Actuator, Rotary, 35 Nm, AC 24 V, DC 010 V, 150 s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GIB161.1E Damper Actuator, Rotary, 35 Nm, AC 24 V, DC 010 V, 150 s - Siemens GIB161.1E Damper Actuator, Rotary, 35 Nm, AC 24 V, DC 0.10 V, 150 sWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and adjustable mechanical limit stopButton ...more
6" x 6" x 1/2" Scotchman #9012, Hydraulic Ironworker, 90 Ton, 45 SPM, 5 HP, 230 V., 12" throat, brake attach, w/ punches & dies
Wheeler Machinery Sales | Pomona, CA
Category: Ironworkers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Scotchman
Model: 9012
SCOTCHMAN 9012 Hydraulic Ironworker #7906 #1, SPECIFCIATIONS:, Punch capacity: 90 ton, Throat depth: 12", Flat bar shear: 24" x 1/4", 16" x 1/2", 12" x 3/4", 8" x 1", Angle shear: 6" x 6" x 1/2", Stroke: 45 SPM, Motor: 5 HP, 230V, 3 PH, Machine Dimensions: 77" x 31" x 72", Machine weight: 4,300 LBS, Punching Station ...more
Edwards #ED9-IW65-3P230-A, 65 ton ironworker, 230 V., 3 phase w/Powerlink, new
Lenmark Industries | Langley, BC
Category: Ironworkers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: ED9-IW65-3P230-A
SKU: 132300, Model: ED9-IW65-3P230-A, Condition: New, Electrical :, Voltage: 230 volts, Phase: 3-phase, Tons: 65 ton, Dimensions: 63.00 (H) x 69.00 (W) x 46.00 (L) inches, Additional :, Stock Number: ED9-IW65-3P230-A, s, - Adjustable electric stoke control, - Angle Shear blades have 2 corner radii for both thin and ...more
6" x 6" x .5" Edwards #100-TON-DELUXE, 100 ton, 1770 RPM, NEW
Smith Machinery Co | Ames, IA
Category: Ironworkers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Edwards
Model: 100-TON-DELUXE
PUNCHING:, RATED CAPACITY ------------------ 100 TON, MAX. CAPACITY ------------------- 1 1/16 in DIA. IN 1 in A36, STROKE -------------------------- 1-15/16 in, THROAT DEPTH -------------------- 11 in, OPEN HEIGHT --------------------- 8-3/4 in, SHUT HEIGHT --------------------- 6-13/16 in, WORK HEIGHT ...more
.75 KW Okuma #BL-ME24J-50SN, Servo Motor, 6 Pole, 5.4 Amps, 3000 RPM, 200 V, 2013
iGAM | Detroit, MI
Category: AC Servo Motors
Seller: iGAM
Location: Detroit, MI
Mfr: Okuma
Frame: BL-ME24J-50SN
Year: 2013
This listing is for a USED OKUMA BLME24J50SN AC servo motor. The BLME24J50SN is an OKUMA BLseries servo motor designed for CNC machine tool axes and spindlerelated motion control applications. This motor is commonly used in OKUMA CNC lathes and machining centers where precise speed, torque, and position control are ...more
JLT Clamps #79K-10, Panel & Door Clamp, 48" x 120", (2) horizontal & (4) vertical clamp, 1000 lb., 3" stroke, 2026, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Model: 79K-10
Year: 2026
JLT CLAMPS 79K-10 Panel and Door Clamp; Versatility-Leave the center squaring bar to do multiple doors at once or remove the bar to take advantage of the full capacity of the machine. -- Capacity for solid wood doors 48" x 120". -- Quick release latches on the jaws and moveable squaring bar. -- The squaring mechanism ...more
Granutech Saturn #72-44BGHT, portable shredder, 72" x 44" chamber opening, dual shaft, counter rotating
Alan Ross Machinery Corp | Zion, IL
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Granutech Saturn
Model: 72-44BGHT
Shredder Chamber / Cutting, Chamber opening: ~72″ × 44″, Shafts: Dual-shaft, counter-rotating, Shaft diameter: 8″ hex (typical for 72-series), Cutter diameter: ~22.5″, Cutter speed:, Slow shaft 21–22 RPM, Fast shaft 24 RPM, Torque & Shear Force, Torque: ~48,000+ ft-lbs per ...more
83 HP Isuzu #4JB1-G, extended long block plus engine and cooling package
Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Isuzu
Model: 4JB1-G
Year: 2022
We offer 4 different versions of the Isuzu 4JB1 Power Unit Packages. Note these smaller packages do not come with a base fuel tank or skid mounted. These are an engine, muffler and radiator package. We do offer a more complete (also listed 4JB1T-P) with those components already installed if you need them.These smaller ...more
JUST ADDED!
6" x 6" x 1/2" Scotchman #DO-70/110, ironworker, 70 ton, 2" stroke, 9" throat, dual operator
Yoder Machinery Sales | Holland, OH
Category: Ironworkers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Scotchman
Model: DO-70/110
SERIAL. 1263M0205, MODEL. D.O.70-24M, PUNCHING CAPACITY. 70 TONS, PUNCH STROKE. 2", HOLE CAPACITY. 1-1/8" THRU 3/4" PLATE, FLAT SHEAR. 24" X 3/8" THICK OR 6" X 1" THICK, ANGEL SHEAR. 6" X 6" X 1/2", NOTCHER. 3" X 5" X 3/8", THROART. 9", DUAL OPERATOR. YES, ELECTRIC FOOT TRIP. YES, MOTOR. 10 HORSEPOWER.
Aryma #KS.3.800, 31.5" x 11 gauge High performance automatic circle shear, 1979
Machinery Values Inc | Harrison, NJ
Category: Ring and Circle Shears
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: KS.3.800
Year: 1979
31.5" X 11 GA. ARYMA HIGH PERFORMANCE AUTOMATIC CIRCLE SHEARMODEL KS3-800… S/N 12447.27… NEW 1979 THICKNESS CAP. MILD STEEL. 11 Ga. (.120") (3 mm)SMALLEST SQUARE BLANK CAPACITY. 5.9" (150 mm)LARGEST SQUARE BLANK CAPACITY.″1.5" (800 mm)CUTTING SPEED. 115'-230' PER ...more
Edwards #IW120-3P575-AC900, ironworker, 120 ton, with Powerlink, 10 HP, new
Lenmark Industries | Langley, BC
Category: Ironworkers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: IW120-3P575-AC900
SKU: 129256, Model: IW120-3P575-AC900, Condition: New, Electrical :, Voltage: 575 volts, Phase: 3-phase, Tons: 120 ton, Dimensions: 88.00 (H) x 67.00 (W) x 60.00 (L) inches, Additional :, Stock Number: ED9-IW120-3P575-A, Amperes: 10 Amps, Angle Shear Max Capacity 1/2": 6 x 6, Angle Shear Work Height: ...more
4" x 4" x 1/4" Edwards #Jaws-IV, 50 ton, 7" throat, 8-1/8" open, 7" shut height, flat bar/angle shear Plus 12 round punch & die sets, Fabricator protractor
Nevins Machinery Concepts Inc | South Easton, MA
Category: Ironworkers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Edwards
Model: JAWS-IV
for #520000 Edwards 50 Ton Jaws IV Iron Worker (BRAND NEW), Make:Edwards, Model: Jaws IV, Rated Capacity:50 ton, Throat Depth:7", Open Height:8-1/8", Shut Height:7", Stroke:1-1/8", Cycle Time:2 seconds, Electric Motor:Standard 5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp, Electric Motor Options:5 HP, 3 ...more
3" x 3" x 5/16" Metal Muncher #MM40, hydrauic ironworker, 40 ton, 7" throat, 5 HP, 1998
Yoder Machinery Sales | Holland, OH
Category: Ironworkers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Metal Muncher
Model: MM40
Year: 1998
SERIAL. 054090898, MODEL. MM40, YEAR NEW. 1998, PUNCHING CAPACITY. 40 TONS, MAXIMUM HOLE DIAMETER THROUGH. 7/8" X 1/2" PLATE, DEPTH OF THROAT. 7", SHEAR CAPACITY LENGTH. 14", ANGLES @ 90 DEGREES. 3" X 3" 5/16", ROUNDS. 1", SQUARES. 1", FLATS. 5/8" X 6" THRU 1/2" X 13", COPER. 2-1/8" X 2-3/4" X 5/16", STROKES PER ...more
10 gauge x 8' GMC #HS-0810MD, hydraulic metal shear, 14-18 SPM, 16" throat, 26" Back Gauge, new
Wheeler Machinery Sales | Pomona, CA
Category: Power Squaring Shears (Gauge)
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: HS-0810MD
New GMC 8' x 10ga. Hydraulic Metal Shear SKU: HS-0810MD, 1. Premium Taiwan Manufacturing: Crafted with precision and quality, these machines are manufactured in Taiwan, renowned for their excellence in machinery production., 2. ISO 9001 Certification: Rest assured, the HS-0810MD is built to meet international ...more
120" x 3/8" Webb Roll #7L-1010, angle bending roll, 3 rolls, 10" diameter x 122" rolls, 38" pass line, 8-16 FPM, 460 V., 3 phase
Smith Machinery Co | Ames, IA
Category: Angle Bending Rolls
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Webb
Model: 7L-1010
Year: 1975
Capacity: 10’x3/8” 3PH/460v Rolls are 10” diameter., Max Thickness 3/8" Length of Rolls 10' Roll Diameter 10" # Rolls 3 Hyd/Mech Mech Power Rear Roll (Yes/No) Yes Dimensions 241" L-R x 75" F-B x 71" H Weight 18,500 lbs. USED 10 FT. X 3/8" WEBB #7L-1010 PLATE ROLL, Model no. 7L-1010, Capacity: ...more
Edwards #IW100-3P230-AC600, ironworker, 100 ton, with Powerlink, 7.5 HP, new
Lenmark Industries | Langley, BC
Category: Ironworkers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: IW100-3P230-AC600
SKU: 129255, Model: ED9-IW100-1P230-A, Condition: New, Electrical :, Voltage: 230 volts, Phase: Single-phase, Tons: 100 ton, Dimensions: 67.00 (H) x 69.00 (W) x 46.00 (L) inches, Additional :, Stocker Number: ED9-IW100-1P230-A, Amperes: 22 Amp, Angle Shear Max Capacity 1/2": 6 x 6, Angle Shear Work Height: ...more
350 HP Caterpillar #D343, power unit, turbo charged, warranty, https://dieselsales.com/product/caterpillar-d343-engine-2/
Diesel Sales | Chicago, IL
Category: Industrial Power Units
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: D343
Caterpillar D343 Engine, Turbocharged, Mechanical Fuel System, Approximately 350 Hp Rating, Industrial Power Unit W/ Radiator, Air Compressor, Drive & Accessories As Pictured. 30 Day Parts Warranty Excellent Running Engine, See Video. -- No Smoke Or Blowby Observed During Cold Test Run.
Gea, continuous Stainless Steel heavy duty industrial paddle mixer, 36" W x 20' L, 36" squaring flange, 575 V., 1770 RPM, Fr.365T
JM Industrial LLC | Millwood, WV
Category: Paddle Mixers and Blenders
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Gea
GEA Continuous Stainless Steel HeavyDuty Industrial Paddle Mixer Pug Mill Unused, The Heavy-duty U-trough is 36"W X 20'L, has a depth of 38" with foot base mounts., Full length bolted trough covers have two inspection hatches, vent port and a 23" square inlet., The processing chamber has helically ...more
10" Hill-Acme #00-H, alligator shear, 5-1/4" knife opening, 10 HP, 1984, #58461
Yoder Machinery Sales | Holland, OH
Category: Alligator Shears
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hill-Acme
Model: 00-H
Year: 1984
SERIAL. SB5096H, MODEL. 00-H, YEAR NEW. 1984, CAPACITY ROUNDS. 1-1/2", CAPACITY SQUARES. 1-1/2, CAPACITY REBAR. (1) #11 RE BAR, CAPACITY FLATS. 3/8" X 10", MAXIMUM KNIFE OPENING. 5-1/4", LENGTH OF BLADES. 10", WIDTH OF BLADES. 3-7/8", THICKNESS OF BLADES. 7/8", STROKE PER MINUTE. 16 AT FULL OPENING, STROKE PER MINUTE. ...more
176 HP Perkins #1106C-E60TA, Engine, 2600 RPM, 6L, water jacket aftercooler, rebuilt, warranty
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Perkins
Model: 1106C-E60TA
Complete1106c-E60ta, 176 Hp At 2600 Rpm Rating, 6-Liter Displacement, Water Jacket Aftercooler, Vk38030 Build Code, Electronic Fuel System W/ Mechanical Injectors, Same As Many Cat 3056e Engines Used In G Series Wheel Loaders And Other Caterpillar Equipment, Recent Rebuilt, Offered Exchange With 100 Day Warranty Plus ...more
6" x 6" x 1/2" Scotchman #DO-70/110-24M, dual operator ironworker, 70 ton, 9" throat, made in the USA, new, #SMDO7011024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-70/110-24M
Punch Capacity 70 Ton, 1-1/8" in 3/4" Special Tooling 4" Max. Dia. Throat Depth 9" Flat Bar Shear (Sabre Blade-Std.) 110 Ton, 24" Length Angle Shear 90 Degrees 6" x 6" x 1/2" Angle Shear 45 Degrees 3" x 3" x 3/8" Angle Shear 45 Degrees (With Bar Shear) 4" x 4" x 1/2" Square Rod (Max.) 1/4" To 1", 1 Cavity Brake 12" 65 ...more
176 HP Caterpillar #3056E, Engine Assembly, Water Jacket Aftercooler
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: 3056E
Complete Reman With Six Month Parts Warranty, At $27995.00 Exchange Plus $2,500.00 Core Deposit. Cat 3056e Engines Used In G Series Wheel Loaders And Other Caterpillar Equipment, Same As Perkins Vk-1106c-E60ta Turbo Diesel Engine, 176 Hp At 2600 Rpm Rating, 6 Liter Displacement, Water Jacket Aftercooler, Electronic ...more
Edwards #IW50-3P208-AC500, ironworker, 50 ton, with Powerlink, 7" throat, new
Lenmark Industries | Langley, BC
Category: Ironworkers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: IW50-3P208-AC500
SKU: 129252, Model: IW50-3P208-AC500, Condition: New, Electrical :, Voltage: 208 volts, Phase: 3-phase, Tons: 50 ton, Dimensions: 64.00 (H) x 51.00 (W) x 45.00 (L) inches, Additional :, Stock Number: ED9-IW50-3P208-A, Amperes: 14 Amps, Angle Shear Max Capacity: 1/4" 4 x 4, Angle Shear Work Height : 39-7/8" ...more
Siemens GCA164.1E Rotary Air Damper Actuator, AC/DC 24 V, DC 035 V Adjustable
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GCA164.1E Rotary Air Damper Actuator, AC/DC 24 V, DC 035 V Adjustable - Siemens GCA164.1E Rotary air damper actuator, AC/DC 24 V, DC 0.35 V adjustable, 18 Nm, spring return 90/15 s, 2 auxiliary switchesWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith ...more
Zeiss #ICM-405, Metallurgical microscope
Frank Bacon Machinery Sales | Warren, MI
Category: Inspection Equipment
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Zeiss
Model: ICM-405
Zeiss ICM 405 Inverted Metallurgical Microscope, (1) USED Zeiss Model ICM 405 Inverted Metallurgical Microscope for Both Incident and Transmitted Light Operations., Zeiss Model ICM 405, 1x Revolving Nose piece X-Y Mechanical Stage Binocular Eyepieces: (2) Kpl-W 10x Epi-Plan Objectives: HD2.5x, HD8x, HD16x, HD40x ...more
6" x 6" x 3/8" Scotchman #6509-24M, 65 ton, 3/4" str, hydraulic ironworker, 24" length, die holder, shear table, new, #SM650924M
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: 6509-24M
Punching Capacity 65 Ton Type Hydraulic Throat Depth 9" Capacity. Flat Bar Shear 24" Length Angle Shear. 90 Degrees 6" x 6" x 3/8" 45 Degrees 3" x 3" x 3/8" 45 Degrees With Bar Shear 4" x 4" x 1/2" Pipe Notcher (Schedule 40 I.D.) 3/4", 1", 1-1/4", 1-1/2", 2" Rectangle Notcher 2" x 2-1/2" x 3/8" 90 Degree V. Notcher 6" ...more
1/4" x 10' Cincinnati #2500X10, hydraulic power shear, 12 holddowns, front & Back Gauge, 1988, #12587
Yoder Brothers Machinery | Toledo, OH
Category: CNC Power Squaring Shears (Inch)
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Cincinnati
Model: 2500X10
Year: 1988
Hyd/Mechhydraulic Back Gauges36 inches, SERIAL. 45493, MODEL. 2500X10 CAPACITY (MILD STEEL). 1/4" @ 10' MAXIMUM CUTTING LENGTH. 123" MAXIMUM RAKE.375 IPF NUMBER OF HYDRAULIC HOLDDOWNS. 12 DISTANCE UNDER HOLDDOWNS. 1/2" FRONT GAUGE RANGE. 8" TO 128" BACK GAUGE RANGE (120 IPM). 48" STROKES PER MINUTE. 32 AT FULL ...more
6" x 6" x 5/8" Marvel Amada #Spartan-MSIW126D/DX, ironworker, 126 Ton, 15 HP, 14" throat depth, 3-1/8" stroke
Pioneer Machine Sales | Rosenberg, TX
Category: Ironworkers
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Amada
Model: SPARTAN-MSIW126D/DX
Amada Marvel Spartan Ironworker, Heavy-Duty, Dual Cylinder, Completely Integrated, 126 Ton Capacity, 15 H.P., D 14" Throat, DX 24" Throat, 5 Work Stations, Simultaneous Dual Operation, Standard Work stations, Punching Station Punch station, Round and Square bar station, Angle shear station, 45 degree angle ...more
Siemens GBB163.1E Rotary Air Damper Actuator, AC 24 V, DC 0-35 V Adj, 25Nm, 150s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GBB163.1E Rotary Air Damper Actuator, AC 24 V, DC 0-35 V Adj, 25Nm, 150s - Siemens GBB163.1E Rotary air damper actuator, AC 24 V, DC 0.35 V adjustable, 25 Nm, 150 sWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and adjustable ...more
34.3 HP, Isuzu #4LE2, Engine, sound attenuated enclosure 4, warranty, unused
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Model: 4LE2
34 Hp- New Surplus, Never Used Complete 4le2nygv-05, Power Unit, 12v, Sae #4 Housing, #10 Flywheel, Naturally Aspirated, Mechanical Injection, Minus Exhaust Muffler. Includes One Year Parts Warranty. Freight Us48 Included In Price. Starting At $9,995.00.
4" x 4" x 3/8" Scotchman #50514-EC, hydraulic ironworker, 50 ton, 6" throat, 2" die holder, punch, bar shear, notcher, 2023
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Ironworkers
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: 50514-EC
Year: 2023
SCOTCHMAN HYDRAULIC IRONWORKER, MODEL: 50514-EC, STANDARD S, 50 Ton Punch Station, Keyed Punch Ram For Safety, 2" Die Holder, Punch Nut With Wrench and Stripper, One Round Punch & Die: Maximum Diameter 1", Adjustable Electric Stroke Control With Scale, Electric Remote Foot Pedal, 14" Flat Bar Shear With 4-Way ...more
3/8" x 13' Ermak #HVR13x3/8, CNC hydraulic shear, Cybelec Control, 3 support arms, foot pedal, 2008
Manufacturing Solutions | Santa Ana, CA
Category: CNC Power Squaring Shears (Inch)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermak
Model: HVR13X3/8
Year: 2008
161"3/8" Mild Steel; 1/4" Stainless Steel39.4"10-17 SPM1839.4"4.33 IPS30 HP1.5 HP182 x 90 x 98"H34,000 lbs..
20 HP Pfaudler #5RW, agitator drive, 15:1 gear box ratio, mechanical seal w/lubricator, belt driven, #22474
Federal Equipment Company | Cleveland, OH
Category: Agitator Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Pfaudler
Model: 5RW
Used 5RW Pfaudler Agitator Drive, 15:1 gear box ratio, rated 20.5 H.P., mechanical seal with lubricator, belt driven less motor, Serial No. R176-1918.
2" x 2" x 1/4" Rogers #Bantam, Ironworker, 10 Ton capacity, 3.7" Shut height, 1/2" Punch Hole thru 1/4" Material, 1 HP, 115/120 V, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Ironworkers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Rogers
Model: BANTAM
Rogers 10 Ton Power Ironworker, Bantam, Inventory # 8229, Model: Bantam, Made in USA, Punch Capacity: 10 Tons, Angles: 2″ x 2″ x 1/4″, Rounds: 3/4″, Squares: 3/4″, Flats: 1/4″ x 4″, Channels: 2″ x 1/2″ x 1/8″, Punch: 1/2″, Round Hole Thru 1/4″ ...more
175 HP Perkins #1106-60TA, Diesel Engine Assembly
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Perkins
Model: 1106-60TA
Vk - Complete Reman With Six Month Parts Warranty, At $27995.00 Plus $2,500.00 Core Deposit Perkins 1106c-E60ta Turbo Diesel Engine, 176 Hp At 2600 Rpm Rating, 6 Liter Displacement, Water Jacket Aftercooler, Electronic Fuel System W/ Mechanical Injectors, Same As Many Cat 3056e Engines Used In G Series Wheel Loaders ...more
172 HP Ftp N6.7, Complete Engine Power Unit, New
Diesel Sales | Chicago, IL
Category: Industrial Power Units
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Ftp
Model: N6.7
172 Hp, Fpt, Industrial Power Unit, Tier 3 Replacement Engine. Open Power Unit New Oem Engine, Variable Speed Mechanical Unit Sae 3 Housing, With 2 Year 2,000 Hour Warranty, Add Optional Pto $1,500.00, Irrigation Or Construction New Cooling Package Includes: - Radiator And Mountings - Air Cleaner. Compared To Cnh ...more
6" x 6" x 1/2" Geka #Hydracrop-110SD, 110 Ton ironworker, deep throat punching capacity, NEW
Smith Machinery Co | Ames, IA
Category: Ironworkers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Geka
Model: HYDRACROP-110SD
Punching Station:, Capacity: 120 US Tons, Ø1-1/2” in 3/4” or Ø 1-1/4” in 1”, Maximum Round Punch that can be held Ø1-9/16”., Optional Attachments up to 4”, Throat Depth: 24”, Working Height: 45-1/2”, Safety:, •2 Stage foot pedal with low ...more
4" x 4" x 1/4" Edwards, hydraulic ironworker, 55 ton, 5 HP, 2012
Equipment Hub | Decatur, GA
Category: Ironworkers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Edwards
Year: 2012
Stock #: 131240031, Location: FL, Brand: Edwards, Model: 55 Ton, Year: 2012, Approx. Shipping Weight: 3,000 Lbs., Approx. Shipping Dimensions: 48" L x 48" W x 64" H, Loading Fee: Rigging Required, Tonnage: 55, Punch Capacity: 1-1/16" Dia. in 5/8" Mild Steel, Flat Shear Capacity: 1/2" x 12" ...more
4" x 4" x 1/2" Geka #BENDICROP 60SD, 67 Ton Hydraulic Ironworker, Bending station, NEW
Smith Machinery Co | Ames, IA
Category: Ironworkers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Geka
Model: BENDICROP
Punch:, Capacity (US tons) 67, Punching capacity: Ø1-1/2" thru 7/16", Maximum Size Punch: Ø1-9/16”, Throat depth: 20", Quick change punch holder, Full stroke or jog mode, Up to Ø4" hole or any shape that will fit within a Ø4” within tonnage capacity of machine is available as an ...more
4" x 4" x 3/8" Scotchman #50514-EC, hydraulic ironworker, 50 Ton, Punch, Bar Shear, Notcher, New, In Stock
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Ironworkers
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: 50514-EC
Year: 2026
(NEW) SCOTCHMAN HYDRAULIC IRONWORKER, MODEL: 50514-EC, STANDARD S, 50 Ton Punch Station, Keyed Punch Ram For Safety, 2" Die Holder, Punch Nut With Wrench and Stripper, One Round Punch & Die: Maximum Diameter 1", Adjustable Electric Stroke Control With Scale, Electric Remote Foot Pedal, 14" Flat Bar Shear With ...more
6" x 6" x 1/2" Scotchman #912-24M, ironworker, 90 ton, angle shear, punch station, 3 yr manufacturers warranty, new, #SM901224M
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: -912-24M
Punching Capacity 90 Ton Punch Capacity 1-1/8" in 1" Special Tooling 4" Max. Dia. Throat Depth 12" Flat Bar Shear 24" Length Opt. Sabre Blade 1/2" x 22" Angle Shear 90 Degrees 6" x 6" x 1/2" Angle Shear 45 Degrees (With Bar Shear) 3" x 3" x 3/8" Brake 12" 50 Ton Brake 24" 40 Ton Open End Brake Max. 1/4" x 6" Pipe ...more
3 HP Lightnin #82-S-3, agitator drive, right angle design, 155 RPM output, mechanical seal, 11.5:1 ratio, explosion proof, #17901
Federal Equipment Company | Cleveland, OH
Category: Agitator Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Lightnin
Model: 82-S-3
Used 3 HP Lightnin agitator drive, model 82-S-3, right angle design, 155 RPM output, 11.5:1 ratio, mechanical seal, explosion proof, serial# 716383.
600 Ton, Verson #S2-600-96-60T, 18" stroke, 35" Shut Height, 5" adj, 96" LR x 60" front back, air clutch, 20 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Verson
Model: S2-600-96-60T
Tonnage 600, Stroke 18 inches, Shut Height 35 inches, Adjustment 5 inches, Bed Size 96" LR x 60" FB, Ram Area 96" LR x 60", SPM 20 SPM, Standard, Rebuilt 600 ton Verson Press Model S2-600-96-60t, Straight Side Mechanical Press, 600 ton Capacity, 18" Stroke, 35" Shut Height, 5" Motorized Adjustment, 96" LR x 60" FB Bed ...more
390 HP Cummins #855-Big-Cam, Engine Assembly
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Cummins
Model: 855-BIG-CAM
Like New Only 76 Hours Complete Ready To Go To Work Exchange With 100 Day Parts Warranty Plus Refundable $1,000.00 Core Deposit. Starting At $21,995.00 1987 Cummins Nt855-G3, 340 Hp At 1500 Rpm/390 Hp At 1800 Rpm Rating, Full Mechanical Fuel System, Pt Pump, Cpl 0699, Serial # 11400100. Ar# 699.
2000 Ton, Nittan Massey #MHFP2000-LW, hot forging press line, 11" strtoke, 43.3" Shut Height, 200 HP
Perfection Global | Elk Grove Village, IL
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Nittan Massey
Model: MHFP2000-LW
Year: 2004
Capacity: 2000 TonStroke: 11.8"Shut Height: 43.3"Pressing Speed: 20 SPMIdling Speed: 60 SPMBottom Ram Size: 44.1" x 54.7"Main Wedge Top Surface: 40.9" x 55.3"Main Wedge Adjustment: 0.5"Mechanical Upper Ejector (Ram) Capacity: 10 TonMechanical Upper Ejector (Ram) Stroke: 1.2"Hydraulic Lot Ejector (Table) Capacity: 25 ...more
.73 HP PRG Agitator #R100LA-12D, Stainless Steel, 230/460 V., mechanical seal w/lubricator, 36" long shaft, 3-blade prop agitator, #32704
Federal Equipment Company | Cleveland, OH
Category: Agitator Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Prg
Model: R100LA-12D
Used 0.55kw (.73hp) PRG agitator drive, type R100LA-12D, 230/460 volt, mechanical seal with lubricator, approx 36" long shaft with three blade prop agitator, serial# 03/23 457.
80 HP Cummins 4BT3.9, Engine Power Unit, Rebuilt
Diesel Sales | Chicago, IL
Category: Industrial Power Units
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Cummins
Model: 4BT3.9
80 Hp, Remanufactured Open Power Unit Starting At $14,995.00, Variable Speed Mechanical Ve Pump With Sae 3 Housing Irrigation Or Construction Includes New Cooling Package No Control Panel. No Pto, And Six-Month Warranty, Tier 2. Add Abs#12139 Warranty.
100 GPM @ 80 TDH, Durco #2LX3-10/90, Graphite Centrifugal Pump, 2" x 3", 10" diameter Impeller, 3 HP, 1750 RPM, 230/460 V, On Base
Perry Videx LLC | Hainesport, NJ
Category: Centrifugal Pumps
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Durco
Model: 2LX3-10/90
Used approximately 100 GPM @ 80' TDH, graphite centrifugal pump. Manufactured by Durco. Serial #312705, model #2LX3-10/90, size 2X3. 10" impellor, 1750 rpm. Front suction, top discharge. Mechanical seal. Direct coupled to 3 HP, 3/60/230/460 volt, 1750 rpm motor, UL label. Base mounted., DURCO 2LX3-10/90.
Nilson #S-2-F, Four Slide Wire Former, 1/8" wire diameter, 2" wire width, 10" feed, open gears, mechanical clutch, straightener, solid cams
National Machinery Exchange | Newark, NJ
Category: Wire Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Nilson
Model: S-2-F
WIRE DIAMETER. 1/8" (.125"), MAX WIRE WIDTH. 2", FEED LENGTH. 10", OPEN GEARS, MECHANICAL CLUTCH, STRAIGHTENER, SOLID CAMS, MOTOR.
Ingersol Rand, Stainless Steel In-Line Centrifugal Pump, Mechanical Seal, Direct Coupled, 3" x 1.5" Flanged Connections, 7.5 HP, 3490 RPM, 230-460 V
Perry Videx LLC | Hainesport, NJ
Category: Centrifugal Pumps
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Ingersoll-Rand
Used Ingersoll Rand in-line centrifugal pump. 316 stainless steel construction. 3" X 1/5" flanged connections. Mechanical seal. Driven by a direct coupled 7.5 HP, 3/60/230-460 volt 3490 rpm motor., INGERSOLL RAND 3.0" X 1.5".
Weinig #Unimat-Gold, feed through moulder, 5 head, 9-1/6" x 4-3/4" capacity, 6800 RPM, 78" infeed straightening bed, 20-78 FPM variable speed, sound attenuated enclosure, 2007
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Weinig
Model: UNIMAT-GOLD
Year: 2007
Unimat Gold 6-Head Moulder, Manufacturer's to be confirmed, Unimat Gold 6-Head Moulder,. 4-3/4" x 9-1/16" capacity., 1-1/2" diameter spindles, Spindle Configuration: 10 HP Bottom, 10 HP Right, 10 HP Left, 15 HP Top, 20 HP top, 10 HP Bottom. 6,800 RPM on all spindles., 5.5 HP inverter controlled variable speed feed ...more
Siemens GBB136.1E Rotary Air Damper Actuator, AC 24 V, 3-Position, 25 Nm, 150 s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GBB136.1E Rotary Air Damper Actuator, AC 24 V, 3-Position, 25 Nm, 150 s - Siemens GBB136.1E Rotary Air Damper Actuator, AC 24 V, 3-Position, 25 Nm, 150 s, 2 Auxiliary SwitchesWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and ...more
Siemens GMA326.1E Rotary Air Damper Actuator, AC 230 V, 2-Position, 7 Nm, 90/15s
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Siemens
Siemens GMA326.1E Rotary Air Damper Actuator, AC 230 V, 2-Position, 7 Nm, 90/15s - Siemens GMA326.1E Rotary Air Damper Actuator, AC 230 V, 2-Position, 7 Nm, Spring Return 90/15 s, 2 Auxiliary SwitchesWith self-centering shaft adapter for shaft dia. 6.4.20.5 mm, square 6.4.13 mm, min. shaft length 20 mmWith position ...more
6" x 6" x 1/2" Scotchman #DO-120/200-24M, dual operation hydraulic ironworker, 120 ton, 12" throat, USA, new, #SMDO12020024M
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Ironworkers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Scotchman
Model: DO-120/200-24M
Punching Capacity 120 Ton Special Tooling 4" Max. Dia. Throat Depth 12" Flat Bar Shear 24" Angle Shear 90 Degrees 6" x 6" x 1/2" Angle Shear 45 Degrees (With Bar Shear) 3" x 3" x 3/8" Brake 12" 75 Ton Brake 24" 55 Ton Open End Brake Max. 1/4" x 6" Pipe Notcher 3/4", 1" Schedule 40 1- 1/4" 90 Degrees V-Notcher 6" x 6" ...more
Bradbury, hydraulic flying shear w/prepunch, 50" blade length, 14 gauge capacity, #71627
Yoder Machinery Sales | Holland, OH
Category: Flying Shears
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury & Tishken
BRADBURY IN LINE CUT TO LENGTH SHEAR, CAPACITY. 14GA, BLADE LENGTH. 50", CANTELEVERED ENTRY. 4 ROLL 2" DIA., ADJUSTABLE ENTRY GUIDES. 48", DRIVEN PINCH ROLLS. 5" DIA., STRAIGHTING ROLLS. 2 OVER 3, 3" DIA., TYPE. FLYING SHEAR.
24" Canton / Hill-Acme #11A, alligator shear, Stock 17417
Yoder Brothers Machinery | Toledo, OH
Category: Alligator Shears
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Model: 11A
SERIAL. 48430, MODEL. CANTON #11A BAR CAPACITY. 2" SQUARE MILD STEEL PLATE CAPACITY. 24" X 3/8" MILD STEEL PIPE CAPACITY. 4" STANDARD KNIVES. 24" X 5" X 1-1/4" SPEED. 45 SPM JAW OPENING. 8" FOOT TRIP. YES MOTOR. 7.5 HP.
