Buy or Sell Your Vertical Lathe

SERIAL. 17419, BOX COLUMN. YES, SPINDLE CENTER TO LOWER COLUMN. 12-1/2", SPINDLE CENTER TO UPPER COLUMN. 12", MAXIMUM DISTANCE SPINDLE TO TABLE. 34", AREA OF WORK TABLE. 24" X 19", POWER FEED SPINDLE TRAVEL. 12", VERTICAL TABLE TRAVEL. 16", VERTICAL ADJUSTMENT OF SLIDING HEAD. 18", SPINDLE SPEEDS. (12) 60-1500 RPM ...more

Hurco Vertical Knee Mill, 11” x 48” Table, Model SM-1, Serial # SF-8015045, Asset # 15655, Overall Table Size 11” x 48”, Distance between T-Slots 2 ½”, Longitudinal Table Travel 30”, Cross Travel 14”, Vertical Travel 18”, Overarm Travel 23”, Distance Center ...more

Make: Tormach, Model: 770M, Year: 2022, Machine Location: Missouri, X-Axis Travel: 14″, Y-Axis Travel: 7.5″, Z-Axis Travel: 13.25″, Spindle Power: 1.5 HP, Max. Spindle Speed: 10,000 RPM, Spindle Taper: R8, X/Y Axis Feed Rate: 135 IPM, Z Axis Feed Rate: 110 IPM, Table Size: 26″ x 8″, Max. ...more

, Cushman 1010408000D/6-E lathe chuck with 8.25-inch overall diameter, 3 jaws, 2.5-inch center hole, and 3-inch thickness. Ideal for tooling and accessories in machinist applications. Used condition, model 6E., Spec Sheet:, Cushman 1010408000D/6-E - 8.25in - 3 Jaw Lathe Chuck, USED, Brand: Cushman, Model Number: ...more

, Toolmex NUA-25M Tool & Cutter Grinder, Manufacturer: Toolmex Model: NUA-25M, (Subject to Verification), Table Size: 36" x 5.25", Max Center Distance: 25", Max Swing Over Table: 9.8", Distance Wheel Center to Table: 3.5" - 13.75", Longitudinal Table Travel: 17", Cross Table Travel: 9.5", Fine Cross Travel ...more

Used approximately 1,500 gallon vertical fiberglass tank, with Hockmeyer model T10VR propeller agitator., HOCKMEYER T10VR, Capacity. 1,500 gal.

Manufacturer: Lindberg, Type: Gas-Fired Temper Furnace, Serial #: 959574 (built 1995), Type: 93-243624-G14, Working Dim’s: 24” wide x 36” deep x 24” high, Max Temp: 1400°F, Heated: Gas-Fired, 400,000 BTU/HR, Power: 480 Volts, 3-Phase, 60 HZ, Vertical rising pneumatic door, Controls: Free ...more

, Enhance your production with a used SHARP LMV/MP-2 CNC Mill featuring Acu-Rite MP2 control, 9x42" table, and Kurt PDB. Perfect for precision machining with versatile speeds and travel options. Includes 3-axis DRO, chrome ways, and swivel vice., Spec Sheet:, Standard s, 9 x 42 table, 11 x 25×5 travel, Vari ...more

Used Apache Approximately 7,250 Gallon Vertical Stainless Steel Mixing Tank, Flat top, cone bottom with several central bottom outlets, Lightnin Series 10 off-set bridge-mounted agitator drives with dual 3-blade pitch agitator, On (4) stainless steel legs, Size: 108" diameter X 174" straight side, Weighs approximately ...more

RBB DIAMANT KING 6000 Vertical Laminate Glass Saw / Cutting System - 6000 x 3200 mm (236" x 118")High quality Italian manufactured automatic machine for the vertical and horizontal cutting of thick, bullet-proof and laminated glass sheets. The load-bearing structure is in hot-galvanised steel and is designed to ...more

NUMBER OF STANDS.: 20. TWO SEPERATE BASES OF 10 AND 10, ARBOR DIAMETER.: 2.5", ROLL SPACE.: 30", HORIZONTAL SPACING.: 16", VERTICAL ADJUSTMENT.: 5" TO 10", Machine Type.Roll Formers Manufacturer.PEARSON Model.N/A Year.N/A Condition.Used.

MODEL. 1-1/2, NUMBER OF STANDS. 12, ROLLSPACE. 24", BASE TO LOWER ARBOR CENTER. 3-1/2", ADJUSTMENT. 1/2", TOP ROLL VERTICAL:, MAX HEIGHT. 4-1/4", MIN CENTERS. 3-3/4", DIAMETER OF SPINDLE. 1-1/2", LINE DIRECTION. R-L, ENTRY AND EXIT PINCH ROLLS. YES, DRIVEN ENTRY HORIZONTAL CENTERS. 6-1/2" BETWEEN STANDS, TOOLED FOR ...more

SERIAL. 376, SWING OVER WAYS. 12", SWING OVER CROSS SLIDE. 7", DISTANCE BETWEEN CENTERS. 36", SPINDLE SPEEDS. 60 TO 1240 RPM, SPINDLE HOLE. 1-1/2", FEEDS.0034 TO.956 IPR, THREADS ENGLISH. 4 TO 112 TPI, THREADS METRIC.025 O 7.5 MMPR, 3 JAW CHUCK. 7", THREAD DIAL. YES, TOOL POST. 4 WAY, CHIP PAN. YES, MOTOR. 2 HORSEPOWER.

The <strong>FANUC M-900iB/280L with R-30iB PLUS</strong> is a <strong>used</strong> long-arm industrial robot from the high-capacity <strong>M900 series</strong>, designed to bring extended reach and payload performance to demanding manufacturing environments. This 6-axis model ...more

SERIAL. 17-13, MODEL. 4000/5000, SWING OVER WAYS. 40", SWING IN GAP. 56", SWING OVER CROSS SLIDE. 28", DISTANCE BETWEEN CENTERS. 160", SPINDLE SPEEDS. 9 TO 500 RPM, FEEDS. 0013 TO.0260, THREADS ENGLISH. 1 TO 112 TPI, THREAD METRIC. 1 TO 14 MM, FRONT CHUCK. 24" 3 JAW, REAR CHUCK. 36" 4 JAW, SPINDLE HOLE. 5-3/4", MOTOR. ...more

Burr Masher, -4" Dia. x 68" Face Rolls, -Spring Loaded Independent Vertical Adjustment, -Top Roll Opens by Hydraulic Cylinder, Alligator Style, -In Storage: Toledo, OH.

, Qty (2) Each: Raw Naptha feed service pumps. Driven by 300 hp, WP1 motor., 1973 AFTON HPV, GPM. 440, Type. Centrifugal, Horz/Vert. V, Size. 4x6x22, Material. Steel, Ft/Hd. 2110.00.

Used Approximately 30 Gallon Stainless Steel Tank, Capacity: 30 gallons, Dimensions: 20: dia. x 24" straight side, Dish top, dish bottom, Mounted on stand, _UNKNOWN_ 30 GALLON, Capacity. 30 gal, Diameter. 1.67', Height. 2', Type of stainless. Stainless Steel, Type Of Heads. Dish, Vertical/Horizontal. Vertical ...more

Diameter 1.1 - 1.7 in Part No. 130126, For tubes with up to 0.2" wall thickness, steel or non-ferrous metalSeveral tube diameters combined in 1 deviceHorizontal and vertical operationSuitable for double-connection.

SERIAL. 14E-170, MODEL. MAKINO, YEAR NEW. 1985, MAXIMUM SWING OVER BED. 19-1/4", SWING OVER CROSS SLIDE. 12", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 40-1600 RPM, HOLE THRU SPINDLE. 3-1/16", LONGITUDINAL FEEDS - ENGLISH. (48).0018-.104 IPR, LONGITUDINAL FEEDS - METRIC. (48).05-2.6 MMPR, THREADS. (48) 2-112 ...more

ROHM 12″ Solid 4-Jaw Chuck with D1-6 Mount, Inventory # 9150, 12″ Solid 4-Jaw Chuck with D1-6 Mount, FOB Our Baltimore, MD Warehouse, Related.

16" 3-JAW SELF CENTERING FLAT BACK CHUCK.

SMW Autoblok AXN570 Indexing Chuck (subject to buyer verification):Large indexing chucks like the AXN-570, are predominately utilized by the Oil and Gas industry, to machine largevalves, fittings, etc, Purchased New in 2017https://www.smwautoblok.com/sv/wp-content/uploads/sites/17/2022/09/AXN_EN.pdf.

Used De Dietrich approximately 50 gallon glass lined tank. Rated 100 psi/full vacuum internal @ 500F. No jacket. Stainless steel top with half lid cover. Center bottom outlet. On wheels. Natoinal Board 732., 1997 DE DIETRICH 50 GALLON, Capacity. 50 gal, Internal Pressure. 100 psi, Internal Temperature. 500F ...more

GIDDINGS AND LEWIS OUTBOARD SUPPORT (Tailstock), HORIZONTAL BAR, Table Type Bar, For M-300T, Condition: Very Good, BAR DIAMETER. 4&lsquo;&rsquo;, VERTICAL TRAVEL. 36&rsquo;&rsquo;, BASE SIZE: Fits ways that are, Thick. 2&rsquo;&rsquo;, BASE OVERALL WIDTH. 29-3/16&rsquo;&rsquo;, Left Way ...more

Simplex Grinnell 4905-9931 742-301 TrueAlert SmartSync Adapter Plate, Red - Simplex Grinnell 4905-9931 742-301 TrueAlert SmartSync Adapter Plate, Red, for Mounting to Simplex 2975-9145 box (typically for retrofit, may be mounted vertical or horizontal) 8-5/16" x 5-3/4" x 0.060" thick (211 mm x 146 mm x 1.5 mm) - ...more

SERIAL NUMBER. A6026028MODEL. JC6236SWING OVER WAYS. 16"SWING OVER CROSS SLIDE. 8-1/2"SWING OVER GAP. 22"DISTANCE BETWEEN CENTERS. 40"SPINDLE SPEEDS. 28 TO 1400 RPMTHREADING (INCH). 4 TO 48 TPIMETRIC THREADING. 0.05 TO 6.5 MMFEEDS. 0.0015 TO 0.0115DIAMETER OF SPINDLE HOLE. 2"CHUCK (3-JAW). 6"COLLETS. YESCOOLANT & ...more

Used Ceramic Coatings approximately 500 gallon glass lined vertical pressure vessel, Type HT-2008 glass, 4' diameter X 5' straight side, Rated 90 psi/full vacuum internal @ 650F, Mounted on (4) legs, CERAMIC COATINGS 500 GALLON, Capacity. 500 gal, Condition Of Glass. Type HT-2008, Internal Pressure. 90 psi ...more

SERIAL. 22061, MODEL. 01440, SWING OVER WAYS. 14", SWING OVER CROSS SLIDE. 8", SWING IN GAP. 22", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. 30 TO 2500 RPM, DIAMETER OF SPINDLE HOLE. 1-1/2", FEEDS LONGITUDINAL.001 TO.256 IPR, THREADS (ENGLISH). 1 TO 56 TPI, THREADS METRIC. 0.4 TO 7 MM, CHUCK. 8" 3 JAW, THREAD ...more

11" X 58" BRIDGEPORT VERTICAL MILL MODEL: SERIES II, S/N: 2154, NEW: 1980's :WORKING SURFACE OF TABLE. 11" X 58" RANGE: - LONGITUDINAL.″0" - CROSS. 15" VERTICAL (KNEE). 16" RAM TRAVEL. 16"MAXIMUM THROAT DISTANCE. 26-5/8" MINIMUM THROAT DISTANCE. 10-5/8" ...more

, 450 Gallon 316L Stainless Steel Full Vacuum Vessel. Rated 100 PSI/FV @ 220 / -20 degF. 3' dia x 8' T/T (11'6" Overall Height)., 2017 STAINLESS TANK, INC. 450 Gallon 316L Full Vacuum Vessel, Gallons. 450 gal, PSIG. 100/FV, ID - Inches. 36 in, Length. 8', Temp (F). 220 / -20, Material. 316L STAINLESS ...more

BRAND NAME. BISION ', DIAMETER OF CHUCK. 15", NUMBER OF JAWS. 3", HOLE THRU CENTER. 5", BACKING PLATE. D-1-8.

Used approximately 5000 gallon Pfaudler Chemstor glass lined tank. 8'6" O.D. X 10'6" straight length. Welded dished heads. With Series 2711 glass. Rated 30 psi at 300 deg. F. Built 1975. Serial #R265-0638. Openings top: (1) 18" manway W/cover, (2) 3", (1) 4", (1) dished side, (2)3" for stand glass, (1) 3" for ...more

SUPERMAX YC 1-1/2VS Vertical Mill # 7747 #1, Table Size: 9 x 42, Longitudinal Table Travel: 34, Cross Travel: 12, Vertical Knee Travel: 16, Ram Travel: 12, Spindle Speed: 60 4,200 RPM, Variable, Spindle Taper: R-8, Quill Travel: 5, (3) Quill Feeds:.0017,.0032,.0053 IPR, Head Tilt, Front to Back: 45, Head Swivel, Left ...more

NUMBER OF STANDS. 14, ROLL SPACE. 11" (APPROXIMATELY), SHAFT SIZE. 1-1/2", HORIZONTAL CENTER. 6", VERTICAL CENTER. 4", PASS LINE HEIGHT. 40".

Numturn 500/1000 FANumturn 500/2000 FANumturn 660/1000 FANumturn 660/1500 FANumturn 660/2000 FANumturn 660/1500 SINumturn 660/1000 SINumturn 500/1000 CNC (SI)Numturn 500/1500 SINumturn 500/2000 SINumturn 660/2000 SI Working Area Workpiece length (max.) 36 in 77 in 38 in 58 in 78 in 58 in 38 in 36 in 57 in 77 in 78 in ...more

SEOAM 9″ Solid 3-Jaw Chuck with Flat Back Mount, Inventory # 9138, 9″ Solid 3-Jaw Chuck with Flat Back Mount, FOB Our Baltimore, MD Warehouse, Related.

Quality 17 3/4″ Solid 4-Jaw Chuck with L2 Spindle Mount, Inventory # 9151, 17 3/4″ Solid 4-Jaw Chuck with L2 Spindle Mount, FOB Our Baltimore, MD Warehouse, Related.

Cushman 8 1/4″ Solid 4-Jaw Chuck with Flat Back Mount, Inventory # 9144, 8 1/4″ Solid 4-Jaw Chuck with Flat Back Mount, FOB Our Baltimore, MD Warehouse, Related.

Weeke Models Optimat BST503 and BST507 CNC Through Feed Boring Line Optimal BST507 High Capacity Drilling Machine. Min/Max Workpiece Dimension - Length: 250mm/2500mm - Width (Single): 80mm/1000mm - Width (Line): 100mm/1000mm - Thickness: 12mm/60mm Center Distance Between Drilling Motors (Min/Max): 160mm/576mm Support ...more

Spec Sheet:, Lathe Chuck Jaws 3 Piece Set, Used, Lathe Chuck Jaws, Set of 3, Measured Dimensions:, Height: 3-3/8, Width: 7/8, Deep: 2-1/2, Gap between Teeth on back: 1/8, Stamped: 1-2-3 / C8501.

This is a USED Skinner 10" 3-Jaw self-centering lathe chuck with two-piece reversible jaws and a D1-4 camlock back plate, jaws look in pretty good condition. You can identify the D1-4 camlock back by the three camlocks that are 5/8" in diameter. Chuck has a 2.725" I.D. hole diameter and we greased up the jaws, so it ...more

Used 5,700 gallon (21,000 liter) 304 stainless steel pressure vessel, jacketed, cone bottom, dome top. Manufactured by Mueller, Model F. Internal 25 PSI @ 100F. Jacket 100 PSI @ 100F. 95" ID x 155" T/T. 268" OAH. (4) leg mounted. 16" bottom cone manway with 3" CBO. National Board #45318. Serial #384634-4. Built 2008. ...more