go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Buy or Sell Your Rewinders

Recommended Categories for rewind

warning
AI-ranked results for rewind - closest matches first

Baosuo #Ultra-Compact-2591, 102" litchen towel rewinding line with log saw & packaging, 2010

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Baosuo
Model: ULTRA-COMPACT-2591
Year: 2010
2010 BAOSUO ULTRA COMPACT KITCHEN TOWEL REWINDING LINE, 102"/2591 mm WEB WIDTH, RIGHT HAND LINE, DUAL BAOSUO BELT DIRVEN UNWIND STANDS WITH MAXIMUM DIAMTER 85"/2159mm, BAOSUO EMBOSSING/LAMINATION, BAOSUO CORE WINDER (MFG 2007) S/N 5472D, BAOSUO CORE ELEVATOR AND HOPPER, BAOSUO ULTRA REWINDER (MFG 2010), MAXIMUM OUTPUT ...more

Kidder #660, 45" automatic rewind with splicer

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Kidder
Model: 660
Year: 1996
Used Kidder 45" Wide Automatic rewinder, with splicer, Roll dia. 24" Max., Two (2) 3" dia. leaf type steel shafts, CMC, ( or equivalent) Tension controls, Lay-on roll, and traveling lay on roll, Max. tensions at O.D., of 24" diameter roll 35# with 1000 FPM splicing, speed, Single wall cooling drum, speed indicator, to ...more

Geometrics, 66" shaftless turret unwind with splicing, 40" OD capacity, rebuilt 2011

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Geometrics
903678.003, One (1) used 66" Geometrics Turret Unwind system with splicing. 40" Capacity. Shaftless operation with 6" pneumatic chucks. Units rebuilt in 2011 by Fulton MFG. (2) 25HP Unwind Motors., Manufacturer GEOMETRICS Model TURRET UNWIND Condition Used Stock Number 903678.003 PF.

Unimak SM-1600-FPB, paper slitter and rewinder, 63" wide x 23-5/8" diameter, 16 mils foil thickness, 246 FPM, 15-sets of rotary knives and knife holders, pneumatic air shaft rewind, 2-winding shafts**

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unimak
Year: 2026
UNIMAK SM 1600-FPB Rewind Slitter with Rotary KnivesUNIMAK offers a well built machine with air shafts and rotary knives for slitting heavier products up to 16 mils thick.Technical : -- Working Width 1600 mm ( 63"). -- Max. Roll Diam. 600 mm ( 23-5/8"). -- Max. Foil. Thickness 0.40 mm (16 mils). -- Slitting Speed Max. ...more

52" Uteco #Horizontal-130, single pass laminator, 1000 FPM, unwind & rewind Enercon treaters, dual turrets, 3" shafts, w/ upgrades, 2005

Machinery Solutions Group Inc | Crystal Lake, IL
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Uteco
Model: HORIZONTAL-130
Year: 2005
UTECO Horizon D/TH Model 130 Laminator, manufactured in 2005, in used condition. Ideal for high-quality lamination needs, this reliable machine combines efficiency and performance., 2005 Uteco Horizon D/TH Model 130 Laminator, This 2005 Uteco Horizon D/TH Model 130 Laminator was purchased new and remains in good ...more

64.75" Pro-Eco, tension level / slitting line, 50000 lb., 36"-103" OD

D & H Machinery Inc | Toledo, OH
Category: Slitting Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pro-Eco
64.75" x 50,000# Pro Eco Tension Level / Slitting Line, -Materials: Aluminum Alloys, -Incoming Coil Sizes:, Coil Outside Diameter: 36" Min - 103" Max., Coil Weight: 50,000 lbs. Max., Coil Width Before Slit: 29" Min. - 64.750" Max., Coil Width After Slit: 28" Min. - 62.50" Max., -Width Tolerances:, 1/2 Comm Tolerance ...more

24" Lamiform #Thermolam-1, laminating station with unwind & rewind,s/n #0002,1998

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lamiform
Model: THERMOLAM-1
Year: 1998
Used 24" Laminform Laminator with unwind and rewind, 24" wide laminating surface, Model: THERMOLAM 1, 3/60/240 volt, Serial #0002, Year: 1998, 1998 LAMIFORM THERMOLAM 1.

Ekofa #4300, 4-Color Flexo Printing Press, 43" wide, 60" unwind & rewind diameter, 4"-12" unwind chucks, CMS Moisturizing System, 2007

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Ekofa
Model: 4300
Year: 2007
Used 43" Wide EKOFA 4 Color Flexo Printing Press, Includes 60" Wide CMS Moisturizing system model CM-203, Unwind diameter: 60", Unwind chucks: 4" expanding to 12", Water based inks, Repeat range: 11 - 28", Rewind diameter: 60", Manufacturer EKOFA Model 4300 Year 2007 Condition Used Stock Number 110510.

Elsner #ENR-1000, fully automatic non-wovens rewinder, up to 400 FPM, Servo Control

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Elsner
Model: ENR-1000
ELSNER ENR-1000 SLITTER REWINDER FOR WIPES, SPEEDS UP TO 400 FEET PER MINUTE, WEB WIDTH FROM 12" TO 42"(305mm TO 1060mm), AUTOMATIC TENSION CONTROL, SERVO CONTROL OF SHEET LENGTH, SERVO CONTROL OF WINDING TORQUE, FINISHED ROLL SIZES TO 10"(254mm), QUICK-CHANGE PERFORATION SETUP, THIS IS IN GOOD OPERATIONAL CONDITION. ...more

13" 3-Die station section, Mark Andy #2200, with lamination tower & waste rewind

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Mark
Model: 13 3-DIE STATION SECTION
MARK ANDY 13" MODEL 2200, (3) DIE STATIONS WITH LAMINATION TOWER AND WASTE REWIND, Manufacturer MARK ANDY Model 2200 Condition Used Stock Number 110183.

Polytype aluminum lamination & coating line, wet & dry, aluminum, paper & film, 2 drying tunnels

National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Polytype
, LAMINATION WET & DRY AND COATING, MATERIALS: ALUMINUM, PAPER & FILM, WIDTH: 620MM - 1280MM, THICKNESS: 0.051MM - 0.007MM, COATING STATIONS: 2, DRYING HEAT SOURCE: GAS BURNERS, 2 DRYING TUNNELS, LINE SPEED: 300 MPM MAX, UNCOILER DATA:, 2 SHAFTS UNWINDER TURRET, COIL ID: 152MM, COIL OD: 1000MM, RECOILER DATA: ...more

Paintline, Hunter, 60" Wide x 0.072", aluminum, 500 FPM, variable speed, 80-150 HP, line tensioners, GE drives

D & H Machinery Inc | Toledo, OH
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Hunter
Model: PAINTLINE
Hunter-GFG Paint Line, Material: Aluminum, Line Speed: 125 FPM Min, 500 FPM Max., Entry Section Speed: 125 FPM Min, 650 FPM Max., Exit Section Speed: 125 FPM Min, 650 FPM Max., Thread Speed: 50 FPM Min, 150 FPM Max., Strip Gauge: 0.008" Min, 0.072" Max., Strip Width: 30" Min, 60" Max., Coil Weight: 50,000 lbs. ...more

Temcom #TRW200, Rewinder / Slitter

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Model: TRW200
Inventory No. 0125-080-0042 Manufacturer Temcom Model No. TRW200 Name Trw200 Rewinder / Slitter Arrival Date 03-03-2026 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Fabrication Condition Used Available Quantity 1 Item * Any Questions Or If Interested Please Contact Andrew Ciecerko At ...more

Beloit, 134" foundrinier paper machine, 1000 FPM, 100 tons per day

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Beloit
118" (3.0M ) TRIM BELOIT FOURDRINIER PAPER MACHINE 1000 FPM (PM# 2), Mec-Fab 130" Slice Air Pad HeadBox MFG 1993 with (22) Automatic Profile Adjustments, Mec-Fab Cantilevered Fourdrinier Section MFG 1993, (10) Suction Boxes; Foils; Wire Tension System; Wire Showers and Trim Showers, LG Industries Suction Couch Roll ...more

CMD #1013R, 4-Position Coreless Rotary Rewinder

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cmd
Model: 1013R
Used CMD model 1013R 4-position coreless rotary winder., CMD 1013R.

Cincinnati, 69" rewinder

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
MANDREL LENGTH. 69".

Karlville, inspection rewinder shrink sleeve, 2021

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Karlville
Year: 2021
Karlville Shrink Sleeve Inspection Rewinder, Year: 2021, Manufacturer KARLVILLE Model INSPECTION REWINDER Year 2021 Condition Used Stock Number 110311.

24" Roll doctor machine, Stanford

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Stanford
Model: 24 ROLL DOCTOR MACHINE
Used 24" Wide Stanford Roll Doctor Machine. Model 142LT, serial #4864630. Unwind/Rewind good for 24" diameter rolls. Maximum roll weight 250 lbs. Maximum 1200 feet per minute. Drive by a 5 hp motor with speed controls., STANFORD 142LT.

Moore & White, 60" shafted unwind stand with edge guide, 3" air shaft, pneumatic brake

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Moore & White
904537.007, Used 60" shafted type unwind stand with 3" air shaft, 50" Dia., pneumatic brake and fife edge guide with idler roll., Good overall condition., Model UNWIND STAND Condition Used Stock Number 904537.007PF.

CMD #1013R, 4-Position Coreless Rotary Rewinder, 13" wide capacity

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cmd
Model: 1013R
Used CMD 13" wide model 1013R 4-position coreless rotary winder., CMD 1013R.

American Can #08, automatic, heavy duty, single head, atmospheric can seamer rated from 10-40 cans per minute, (4) roll, double seam, single seaming head, disc to star wheel infeed, no-can/no-lid

Frain Industries | Carol Stream, IL
Category: Canning Seamers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: American
Model: 08
PDC, Model 75 ERLT, Automatic sleever labeler rated from 50 to 250 sleeves per minute – depending on materials, application and machine configuration. Size range: 3/8" to 3" in diameter and 3/4" to 7" in height, film registration and extra length capable. 112" long x 3-1/4" wide ...more

Stanat #HTR-14-1500, Traverse Winder, oscillating rewind line, hydraulic, Guild welder, uncoiler

VX Machinery | Sylvania, OH
Category: Coil Winders
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Stanat
Model: HTR-14-1500
-Stanat Traverse Winder Model HTR 14 1500 Hydraulic, -Guild Welder Model DMA-100-3, -5000 lb Cooper Weymouth Uncoiler 18 wide Electric Brake.

SRC Systems Limited, finished roll unloading system for a slitter rewinder

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Src
This is a roll unlaoding system for a slitter rewinder. This sale will include a mechanical unloading tree as well as installation of that unloading tree and the conveyor/roller sections pictured. The original customer for this machine requested a late design change. The price includes installation of the complete ...more

Phoenix Machine #650FC/18, 18" duplex slitter/rewinder, serial #M00085, 2000

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Phoenix
Model: 650FC/18
Year: 2000
Model: 650FC/18, Serial #: M00085, Year of manufacture: 2000, Web width: 18", Manufacturer PHOENIX MACHINE Model 650FC/18 Year 2000 Condition Used Stock Number 904387PF Serial # M00085 Year of manufacture 2000 Web width 18".

Label-Aire #3111/14-15 LH/SW Grid, pressure sensitive, around the corner spot labeler, 100-2000 linear inches per minute

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Label-Aire
Model: 3111/14-15
Label Aire, Model 3111/14-15 LH/SW Grid, pressure sensitive, around the corner spot labeler. Rated from 100 to 2000 linear inches per minute with number of product – depending on materials, application and machine configuration. swivel mounted bracket, tamp on label head and label size range: ¾" to ...more

Shanklin #F5A, Auto Side Seal Shrink Wrapper, Texwrap Tunnel, 75 PPM, 90 LFPM, AB SLC PLC, 230 V.

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Shanklin
Model: F5A
used shanklin model f5a automatic side seal shrink wrapper. capable of speeds up to 75 packages per minute, and 90 linear feet per minute. minimum package size: 3"-48" length; 1/2"-16" width; 1/8"-6" height. infeed conveyor currently set up on 9" centers. has a hot knife end seal. maximum film width 22" center folded ...more

Simco, Industrial Slitter Rewinder Machine, 34" capacity, 400 V

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Simco
Inventory No. 1025-157-0065 Manufacturer Simco Name Industrial Slitter Rewinder Machine Arrival Date 11-17-2025 Dimensions L x W x H (inches) 54 x 37 x 65 Capacity 34" Weight (lb.) 1270 Category Fabrication Condition Used Available Quantity 1.

Moller #TRW-1000, 40" wrapping paper rewinder, counter roll machine, up to 9-7/8" OD rolls

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Moller
Model: TRW-1000
40" Moller TRW1000, Counter Roll Machine, up to 9-7/8” OD rolls, automatic core feed, Manufacturer MOLLER Model TRW 1000 Condition Used Stock Number 110275.

Rotoflex #DLI330, rewinder, 460 V., 80 amp, 60 Hz, serial #DLI 3008, 2005

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Rotoflex
Model: DLI330
Year: 2005
One (1) Used Rotoflex DLI 330 Rewinder, Manufactured 2005, Electrical: 460v, 80amp, 60hz, Manufacturer ROTOFLEX Model DLI 330 Year 2005 Condition Used Serial Number DLI 3008 Stock Number 904533.014PF.

Custom Built 65" sheet winder, (2) fixed winding positions, 32" OD rolls, chain driven

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Custom
Used 65" custom built sheet winder for approximately 32" OD rolls. Winder has two fixed winding positions, chain driven by a common motor., _UNKNOWN_ 65".

Makor #Q-ONE, Flatline Spray System, 51" max. working width, 21-1/2" paper roll diameter, 2 HP vacuum belt motor, 2.2 KW reciprocator motor, 7950 cfm, 2020

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Makor
Model: Q-ONE
Year: 2020
MAKOR Q-ONE - Feed Through Spray Machine. -- The Q-ONE Sprayer. Single Arm Reciprocating System with: Paper belt overspray collection; it combines: Productivity, flexibility, and quick changeover with a limited investment. -- This continuous belt Conveyor System, combined with disposable paper promotes: ...more

Jagenberg #E15, 70" unwind, 60" OD rolls w/dual 22" disc brakes, serial #E87.01116

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Jagenberg
Model: E15
Used Jagenberg unwind stand, 70" (1,778 mm) width. Rated for rolls up to 60" (1,524 mm) outer diameter. dual 22" (559 mm) disc brakes. s individual motorized functions for up, down, in, and out adjustment. Machine Type E15. Serial number E87.01116., JAGENBERG E15.

Stanford #142, 16" doctor rewinder, 20" max diameter, 1000 FPM, 5 HP, 1725 RPM

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Stanford
Model: 142
904021.002, 1000 Ft Per Min, 5 Hp, 1725 Rpm, Manufacturer STANFORD Model 142 Condition Used Stock Number 904021.002PF.

Caterpillar 740 GC, Articulated Truck, 952 hours, S/N: 3T805796, 2023

Wyoming Machinery - Cat | Gillette, WY
Seller: Wyoming Machinery - Cat
Location: Rock Springs, WY
Mfr: Caterpillar
Model: 740 GC
Year: 2023
2" DRAIN VALVE INSTALED IN SUMP, 50 X 1 MANUAL REWIND HOSE REEL, AID, COLD WEATHER STARTING, ANTI-SIPHON ALT LOCATION REAR, ANTIFREEZE, -36C (-33F), AUTO LUBE KIT FOR WATER PUMP, CAB, STANDARD, CHASSIS, STANDARD (NO BODY), EQUIPMENT LOADING FEE, EXHAUST, STANDARD, FACTORY INSTALL, FENDER COVER, FILLER, FAST FUEL, FILM ...more

Tronics #S1000, pressure sensitive, modular design, roll up to conveyor, spot or wrap labeler, with tool-less 4-Axis label head & 9" high peeler plate & 9" wide label wipe brush

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Tronics
Model: S1000
Tronics, Model S1000, pressure sensitive, modular design, roll up to conveyor, spot or wrap labeler. Rated from 197" to 2,400" per minute with number of product – depending on materials, application and machine configuration. Label size range: 0.56" to 8" in Height; 0.78" to 36"in ...more

Martin #LRD5-18-24, 18" automatic transfer rewinder, 500 FPM, 24" roll diameter, 2007

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Martin
Model: LRD5-18-24
Year: 2007
109373 USED 2007 Martin Automatic LRD 5-18-24 18-inch used automatic transfer rewind featuring 500ft/min, 24” max roll diameter, slitting and web guide, Manufacturer MARTIN Model LRD Year 2007 Condition Used Stock Number 109373.

Webtronics #R.R.C, Industrial Slitter Rewinder Machine, 40" capacity, 1994

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Webtronics
Model: R.R.C
Year: 1994
Inventory No. 1025-157-0064 Manufacturer Webtronics Model No. R.R.C Name Industrial Slitter Rewinder Machine Arrival Date 11-17-2025 Dimensions L x W x H (inches) 88 x 54 x 74 Capacity 40" Weight (lb.) 7340 Category Fabrication Condition Used Available Quantity 1 Serial No. 168 Make Year 1994.

75 lb. PA Industries #SRWD2, rewind reel, 3" width, 30" outside dimensions, .75"shaft diameter, 50 RPM, 2 spools

D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Pa Industries
Model: SRWD2
MODEL: SRWD2, SERIAL: 15241-1, 75 LB MAX COIL WEIGHT, 3" MAX STRIP WIDTH,.75" SHAFT DIAMETER, 30" MAX SPOOL OD, 0 TO 50 RPM SPEED, (2) SPOOLS.

Stanford Doctor #142LT, 30" slitter rewinder with Razor slitting,edge guide, 1000 FPM

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Stanford
Model: 142LT
904162.002, One (1) Used Stanford Doctor Machine, Model: 142 LT, 24" Diameters, 1200 fpm material dependent, Edge guide, 250 lb max roll weight, Manufacturer STANFORD Model 142 LT Condition Used Serial Number 12854622 Stock Number 904162.002PF.

Stemas #02FT1, hot stamping, double-support table, complete with pneumatic cylinders for piece clamping, 2026, new

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Model: 02FT1
Year: 2026
STEMAS - 02FT1,.End FoilerSTEMAS designed a Foiler that works the ends of a moulding; a foiling Edgebander to finish the exposed ends of laminated mouldings.Machine Configuration: -- Machine Base is a heavy steel structure. -- Double-Support Table with guide and part reference for moulding alignment, complete with ...more

Ruesch, rewind tension bridle, entry separator tooling bars, 5" diameter x 20" face bridle rolls

D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Rewind Tension Bridle, -N2729G 6043, -Entry Separator Tooling Bars, -5" Dia. x 20" Face Bridle Rolls, Rubber Covered, -Passline Height: Approx. Range 48" to 62", Height is adjustable thru AC Motor and Screw Jack, -Overall Size: 40" L x 29" W x 64" High, -In Storage: Toledo, OH.

Associated Machine Design #304, rebuilt Langston 304 Speedmaster 2-drum slitter rewinder, 2002

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Associated
Model: 304
Year: 2002
Used Two Drum Slitter Rewinder, Langston 304 Speedmaster Rebuilt by Associated Machine Design. Heavy Duty design, Single Reel spool Backstand with pneumatic braking and edge guide adjustment, Lead in rollers with auto tension control, Shaftless rewinding with 60" OD Diameter capacity, (2) 100 HP Motor drive system ...more

Sanden #Quantum-1250, Variable Cutoff Web Press System, (6) Color, 28"/24" cutoff x 20.5" width, 2500 lb. Splicer max roll, 2000

Machinery Solutions Group Inc | Crystal Lake, IL
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Sanden
Model: QUANTUM 1250
Year: 2000
2000 Sanden Quantum 1250 (6) Color Variable Cutoff Web Press System, 28” & 24” Cutoff X 20.5” Width, - (1) Enkle Splicer Model I32650SE Max roll 2500 LB, - (1) Sanden Quantum 1250 Infeed with web guide, - (6) Sanden Quantum 1250 non-perfecting printing units, - (3) Print Cylinder Inserts ...more

Label-Aire #3114NV, pressure sensitive blow ta, 600-1500 linear inches per minute

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Label-Aire
Model: 3114NV
Label Aire Model 3114 NV 1500 7"x16" RH 1-10"ST pressure sensitive, blow tamp spot labeler rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. swivel mounted bracket and blow tamp label head with label size range: 3/4" to 5" ...more

Coil rewind line, R to L, 20 ton, 1400mm coil diameter, L entry coil cr, motorized pinch rolls

National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
LINE DIRECTION.RIGHT TO LEFT, "L" ENTRY COIL CAR, Travel on Rails, UNCOILER, Snubber Roll, Max. Coil Diameter.1400mm, Disc Brake, Traverse, Hydraulic Operation, Leafs, PINCH ROLLS, Motorized, Exit Table, Hydraulic operation, RECOILER, Coil ID / OD.500mm / 1400mm, Push Off Plate, Motor Drive.44 Kw., 460 Volt, PULPIT ...more

Label-Aire #3114NV-1500, pressure sensitive, blow tamp spot labeler, 600-1500 linear inches per minute, swivel mounted bracket, mounted on hand crank height adjustable T-stand with casters (2 available)

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Label-Aire
Model: 3114NV-1500
Label Aire Model 3114 NV 1500 7"x16" RH 1-10"ST pressure sensitive, blow tamp spot labeler rated from 600 to 1,500 linear inches per minute, with number of product – depending on materials and application. swivel mounted bracket and blow tamp label head with label size range: 3/4" to 5" ...more

Aesus #Delta, automatic, single or dual side servo driven, Stainless Steel, empty pre-made pouch labeling system

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Aesus
Model: DELTA
Aesus Model Delta, automatic, single or dual side servo driven, stainless steel, empty pre-made pouch labeling system with number of labels per minute – depending on materials, application and label applicator. dual pouch elevators both have 24" long x 3-1/4" wide vertical pouch transfer belts with ...more

Toschi, 2-drum tissue slitter rewinder, 104"web width, 3 unwind stands, w/overhead crane, 2001

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Toschi
Year: 2001
One (1) Used 104" Toschi Two Drum Slitter Rewinder for Tissue, Grammage: 11-27 gsm, Max web width: 104" (2650mm), Max parent roll diameter: 86" (2200mm), Max finished roll diameter: 70" (1800mm), Overhead crane included, Currently erected in Europe, out of operation, Manufacturer TOSCHI Model TWO DRUM TISSUE SLITTER ...more

SRC Systems Limited #SP12, 12-head spooling system, shear/razor slitting, new

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Src
Model: SP12
200221, One (1) New SRC Systems, Ltd. 12-Head Spooling System Model SP12, Maximum material width: 19", Max parent roll diameter: 40", BST pivot frame in-line guiding system, Unwind shaft: 3" auto-inflating air shaft, all tooling for the following:, Shear slitting: 1/4 Inch minimum slit, Razor slitting: 1/8 Inch ...more

Vorwood #L-79D, End Finisher & Foiler, 8.5" width x 80" L capacity, 2021

iBid Machinery | Roswell, GA
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Vorwood
Model: L-79D
Year: 2021
Product : The Voorwood L79 End Finisher is designed to precisely cut MDF mouldings to length, then sand both ends. Next, to complete the one-pass process, an applicator wheel with automatic heat control applies the transfer finish. A louver end foiler is a production-oriented machine designed for reliability and ...more

PCMC, core winder

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Pcmc
904098.026, Manufacturer PCMC Model CORE WINDER Condition Used Stock Number 904098.026PF.

Tissue Converting line, Perini, 2 unwind stands for 2 ply, rewinder, log saw, 1992

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Perini
Model: TISSUE CONVERTING LINE
Year: 1992
109531, One (1) 91" Perini 813 Bathroom Tissue/Kitchen Towel Converting Line, Casmatic PAC111 R2 Single Roll Wrapper, Web Width: 91", Speed: 300 mpm, (1) Perini Rewind, (2) Perini Unwind Stands: Age: 1992, Belt Driven, 60" Diameter, (1) Embossing Unit: 2 Sets of Rolls for BRT and KRT, Diamond and Butterfly patterns ...more

Shanklin #F-1, Horizontal Form-Fill-Seal Wrapper, up to 50 packages per min, 60 linear feet per min, 6" - 48" L x 2" - 16" width x 1/8" - 6" H minimum size, F-1

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Shanklin
Model: F-1
used- shanklin model f-1 horizontal shrink wrapper. machine is capable of speeds up to 50 packages per minute and 60 linear feet per minute. minimum package size: (length) 6" - 48" x (width) 2" - 16" x (height) 1/8" - 6". infeed belt for random spaced product with pneumatic gating. side seal with scrap removal ...more

72" x .157" Alcos, Double Loop Slitting & Banding Line, Dual Head, 60000 lbs., 20-24" ID, 8" arbor, 400/1000 FPM, new

VX Machinery | Sylvania, OH
Category: Slitting Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Alcos
, Manufacturer: Altek, Width: 72”, Thickness Range:.015”–.157”, Coil Weight: 60,000 Lb., Coil Width Range: 18”–72”, Coil ID Entry: 20”–24” Expandable, Coil ID Exit: 20” (24” with saddles), Coil OD Max: 72”, Arbor Size: 8”, Line Speed: ...more

Ronco #3400, core winder

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Ronco
Model: 3400
904098.027, One (1) used PCMC spiral core winder # 6468, Ronco core unwind Mdl 3400. 2 ply unit built in 2010, Valco glue unit, Includes operation and maintenance manuals, Manufacturer PCMC Model CORE WINDER Condition Used Stock Number 904098.027PF.

Ronco #8280, core winder

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Ronco
Model: 8280
904098.028, One (1) used PCMC core winder with Ronco Unwind., PCMC S/N 7428 spiral winder, Valco Glue system, Ronco core unwind stand 8280 01, Recently out of service due to complete plant closure, Manufacturer PCMC Model CORE WINDER Condition Used Stock Number 904098.028PF.

30" x 62" I2S / Mesta, 2 Hi Temper Pass Mill, Carbon Steel, L-R, 2160 FPM, Hydraulic Screwdown, GE 9070 PLC

National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: I2s
Mill Manufacturer - MESTA, Modernized in 1998 by I2S, Typical Products - Carbon Steel, 2 mm to.15 mm up to 1422 mm wid,.080 to.006" thickness up to 56" wide, Roll Size: 762 mm (30"), Max 30" Min 28", Roll Face: 1575 mm (62"), Coil ID: 570/600 mm (22.5/24"), Coil OD Max: 1676 mm (66"), Coil Weight: 20 tons, Mill ...more

Consani #SAI502, 106" industrial roll rewinder, Allen Bradley Logix5000,1985

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Consani
Model: SAI502
Year: 1985
107858, One (1) used Consani SAI 502 102" Industrial Roll Rewinder, Still in operation producing Hard wound Towel, Jumbo Roll Tissue and Center, Pull Towel, Web Width: 106", Output: 500 MPM (1,640 FPM), Roll Diameter Range:50mm - 350mm (2" - 13.79"), Allen Bradley Logix 5000 Electronics - upgraded in 2016, Log ...more

Lembo unwinder

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Lembo
904537.025, Used Lembo unwind stand, 60" wide, 50" diameter. 3" air shaft. Fife guide., Manufacturer LEMBO Model UNWINDER Condition Used Stock Number 904537.025PF.

AVCO Industrial Converting / Web Handling Machine - Used

Industriel Go | Montreal, QC
Seller: Industriel Go
Location: Montreal, QC
Mfr: Avco
Model: INDUSTRIAL CONVERTING MACHINE
Used AVCO industrial converting machine designed for web handling and material processing applications. System includes unwind section, multiple rollers, tensioning components, and integrated frame-mounted configuration. Suitable for paper, film, nonwoven, or similar roll-fed materials., Manufacturer: AVCOType: ...more

Rowe #PW-60, Paper Winder, 60" shaft, AS IS

D & H Machinery Inc | Toledo, OH
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Model: PW-60
Used Rowe Paper Winder, -Model: PW-60, -60" Long Winding Shaft, -1/2 HP Leeson AC Motor, Belt Drive, 1725 RPM, 115/208-230 V, 1 PH., -Needs Repair, -In Storage: Toledo, OH..

Marquip, 72" wide dual unwind with slpicer

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Marquip
72" Wide Marquip Dual Position Unwind Stand with Splicer, 72" Diameters, Removed from service, Manufacturer MARQUIP Model DUAL UNWIND Condition Used Stock Number 110393.

Toschi Tosotec, 132" belt driven unwind stands, 72" diameter, 1998

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Toschi
Year: 1998
904118, Three (3) 134" (3400mm) Toschi belt driven unwinds capable of handling 72" OD rolls. Independent motor driven stands with belt drive. MFG 1998. Last ran tissue grades. Units are set up to handle reel spools off of paper machine., Installed and available due to complete plant closure., Manufacturer TOSCHI Model ...more

Lembo, shaftless floor pick up unwind stand

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Lembo
904537.023, Used Lembo 60" wide shaftless floor, pick up unwind stand, 50" diameter, with Fife guide., Manufacturer LEMBO Model SHAFTLESS FLOOR PICK UP UNWIND STAND Condition Used Stock Number 904537.023PF.

Temcon #TRW-200, Automatic Rewinder & Perforator, 47.3" roll max, 7.6 FPM, 316L Stainless Steel, 2019

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: TRW-200
Year: 2019
used- temcon automatic re-winder and perforator machine, model, trw 200. industrial-grade converting system designed for high-efficiency roll slitting and rewinding applications. max.-1200 mm min. -900 mm roll dimensions, (9) knives, 3.75" cap shaft dimension (mother roll), max. 195 m/min capacity-speed, product ...more

Superfici #Mini-Plus-P, Reciprocating Spray Machine, 16' L x 51" width x 3.5" thick max Workpiece Size, 63" width x 11.8" diameter Paper Roll, 2020

RT Machine | Hughesville, PA
Seller: RT Machine
Location: Hughesville, PA
Mfr: Superfici
Model: MINI PLUS P
Year: 2020
Superfici Model Mini Plus "P" Reciprocating Spray Machine Workpiece Dimensions Min/Max Length: 300mm/4880mm (12" /16') Min/Max Width: 25mm/1300mm (1"/51") Min/Max Thickness: 3mm/90mm ( 1/8" / 3-1/2") Max Weight: 3lbs per SqFt Conveyor System & Paper Protection System Infeed & Outfeed Driven Roller Conveyor ...more

60" x 7" Cincinnati slitting line, 30000 lb., Control panel, pinch roll, slitter head, #69150

Yoder Machinery Sales | Holland, OH
Category: Slitting Lines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 60 X 30000 X 7
CONSISTING OF:, CONTROL PANEL, 30,000 LB COIL CAR, PINCH ROLL, SERIAL. 91600, NOMINAL WIDTH. 60", ROLLS. 75" X 5.5" DIAMETER, PASS LINE HEIGHT. 46", EDGE GUIDE ADJUSTMENT. POWERED & INDEPENDENT EACH END, ROLL HOLD DOWN. PNEUMATIC, SLITTER HEAD, SLITTING ARBORS. 7" DIAMETER, DISTANCE BETWEEN HOUSINGS. 64" MAXIMUM ...more

Diddle Didde #VIP, UV Web Offset Press, 8-Unit, 20.5" web, Interchangeable Cylinders

Machinery Solutions Group Inc | Crystal Lake, IL
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Diddle
Model: VIP
8-unit Diddie VIP UV web offset press with 20.5" web width, interchangeable cylinders, full GEW UV on all units, 14"/17"/22"/23" sheeter with stacker, fan-folder, GEC rewinder, BST web guide, KTI rollstand, CC1 register, Visionary controls, and magnetic/cross-perf tooling., Diddie VIP 8-Unit UV Web Offset Press ...more

Mercury, 44" wide turret unwind stand, 84" diameters, needs brakes

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Mercury
44" Wide Mercury Turret Unwind, 84" Diameters, Needs brakes, Manufacturer MERCURY Model UNWIND STAND Condition Used Stock Number 110230.

Black Clawson, 2 drum winder, shaftless floor pick up unwind stand, 130" wide

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Black Clawson
Used 130" Wide Black Clawson Two Drum Winder, Shaftless floor pick up unwind stand, Removed from service and in storage, Manufacturer BLACK CLAWSON Model TWO DRUM WINDER Condition Used Stock Number 109781 Width 130.0 in.

Cozzoli #RFPC, complete, automatic, all Stainless teel, liquid fill, plug, capacity and label line, Allen Bradley Panelview touch pad controller

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cozzoli
Model: RFPC
Cozzoli Model RFPC, Complete, automatic, stainless steel, liquid fill, plug, cap, pack-off and labeling line with number of containers per minute – depending on materials and application. All stainless steel construction. Line consists of: Cozzoli 36" OD disc unscrambler with feed table to 96" long x ...more

Rotoflex #VSI-330, 13" wide shear slitting, manuals included (2 available)

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Rotoflex
Model: VSI-330
Rotoflex VSI 330 Slitter Rewinder, 13" Wide, Shear slitting, Good overall condition, Manuals included, Two available, price is for one machine, Manufacturer ROTOFLEX Model VSI 330 Condition Used Stock Number 110161.

Beloit, 90" turret unwind with slicing, 72" diameter

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Beloit
90" Wide Beloit Turret Unwind, Max diameter: 72", Splicing unit including, Recently removed from service, Was running with printing press, Manufacturer BELOIT Model TURRET UNWIND Condition Used Stock Number 109948 Purchase Price 30000.00.

Comexi, 58" wide turret unwind with slicing, 32" diameter, 1100 FPM, 2003

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Comexi
Year: 2003
58" Wide Comexi Turret Unwind, 32" Max diameter, With splicing, Speed: Last run at appx 1100fpm, Matching rewind also available upon request, Manufacturer COMEXI Model TURRET UNWIND Year 2003 Condition Used Stock Number 904719PF.

Talleres LEMU #RoboPlus-210/800, automatic slitter rewinder machine line, 2010

Global Machine Brokers LLC | Guilford, CT
Category: Slitting Lines
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Talleres Lemu
Model: ROBOPLUS-210/800
Year: 2010
2010 Talleres LEMU ROBOPLUS-210/800.

19.5" Digital Finisher, Grafisk Maskinfabrik #DC500, (2) unwind stands, 28" dia unwind, lamination, 2013

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Grafisk Maskinfabrik
Model: 19.5 DIGITAL FINISHER
Year: 2013
19.5" GM DC500 DIGITAL FINISHER, (2) UNWIND STANDS, (1) 28" DIAMETER UNWIND, (1) OFFLINE 40" DIAMETER UNWIND, FLEXO PRINT STATION (FLOOD OR SPOT), HOT-AIR DRYING CAPABLE, GEW UV LAMP DRYER, LAMINATION, COLD-FOIL CAPABLE, 2ND GEW UV LAMP DRYER, SEMI-TORARY DIE STATION (25" REPEAT), WASTE REWIND, SHEAR SLITTING, DUAL ...more

27.5" Unimak #ESM-700-F1, Foil Slitter w/ Rewinder, 23-5/8" roll diameter, 1 mm thickness, 328 FPM, (34) knives, 2026, new

Ex-Factory | Charlotte, NC
Category: Slitters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unimak
Model: ESM-700-F1
Year: 2026
UNIMAK ESM 700 F1 Rewind Slitter with Rotary KnivesUNIMAK offers a well-built machine with air shafts and rotary knives for slitting heavier products up to 1 millimeter thick. This machine is set up for slitting edgebanding stock from a bulk roll. Technical : -- Working Width 700 mm (27.5"). -- Max. Roll Diam. 600 mm ...more

Macro Engineering #ME-0-2, 92" pull roll & slitting section with 5 Tidland Performance Series class II shear knives, 2012,

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Macro Engineering
Model: ME-0-2
Year: 2012
904679, 92" Macro Engineering Model ME-0-2, pull roll & slitting section with (5), Tidland Performance Series Class II shear, knives., Manufacturer MACRO ENGINEERING Model ME-0-2 Year 2012 Condition Used Serial Number 12023 Stock Number 904679PF.

CI Flexo Presses, used

Machinery Solutions Group Inc | Crystal Lake, IL
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
availability of used central-impression (CI) flexographic presses for flexible packaging, commercial print, film, foil, paper, and converting applications. Equipment includes Uteco Emerald/Onyx/Sapphire EVO, W&H Miraflex/Novoflex, and other CI/flexo lines from Bobst, PCMC, Flexotecnica, Rotomec, Cerutti, Carraro ...more

Far East Equipment Co. (Far East Equipment Co.), 60" wide floor pick up unwind stand. no edge guide

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Far East Equipment Co.
One (1) Used FEEC Shaftless floor pick up unwind, No edge guide, 60" wide rolls, 60" diameter rolls, Manufacturer FEEC (Far East Equipment Company) Model Unwind Stand Condition Used Stock Number 904521.003PF Width 60.0 in.

Jagenberg #SE-18, shaftless floor pick up unwind stand

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Jagenberg
Model: SE-18
One (1) Used 65" Jagenberg Mdl SE-18 shaftless floor pick up unwind., 72" OD roll capacity. Pneumatic brakes. Hydraulic roll lift. Operator controls., 3/60/480V. Last ran on rotary sheeter. Available due to plant closure., Manufacturer JAGENBERG Model SE-18 Condition Used Stock Number 904708.028PF.

Miyakoshi #MVF-20D-011S1, UV Web Offset Press, 20.5" web, 6-Unit, 1992

Machinery Solutions Group Inc | Crystal Lake, IL
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Miyakoshi
Model: MVF-20D-011S1
Year: 1992
1992 Miyakoshi MVF-20D-011S1 6-unit UV web offset press, 20.5" wide with interchangeable cylinders, full UV on all units, 14"/17"/22" sheeter, fan-folder, GEC 5020FR rewinder, KTI splicer, BST web guide, CC1 register, Visionary controls, and magnetic/cross-perf tooling., 1992 Miyakoshi MVF-20D-011S1, 6-Unit UV Web ...more

Jagenberg #SE-18, shaftless floor pick up unwind stand

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Jagenberg
Model: SE-18
One (1) Used 65" Jagenberg Mdl SE-18 shaftless floor pick up unwind., 72" OD roll capacity. Pneumatic brakes. Hydraulic roll lift. Operator controls., 3/60/480. Last ran on rotary sheeter. Available due to plant closure., Manufacturer JAGENBERG Model SE-18 Condition Used Stock Number 904708.027PF.

A & F #RS-60, 105" wide x 72" dia. shaftless floor pickup unwind stand,rebuilt 2013

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: A & F
Model: RS-60
Year: 1989
904135, One (1) used A & F Mdl. RS-60 shaftless floor pick up, unwind stand, 105 width x 72" dia., 8,000 lb, roll capacity, with fife guide, pneumatic brakes., Manufacturer A & F Model RS - 60 Year 1989 Condition Used Serial Number 892120103 Stock Number 904135.

Bielomatik #64x60, 64" wide x 60" OD shaftless floor pick up unwind stands, set of 4

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Bielomatik
Model: 64X60
110272, Used Set of (4) Bielomatik 64" wide, x 60" diameter, shaftless floor pickup, unwind stands, Double EE chucks, Decurler and infeed system. Last used behind sheeter., Recently out of service., Manufacturer BIELOMATIK Model 64X60 Condition Used Stock Number 110272.

SHM, 60" diameter shaftless floor pickup unwind, 64" roll width, 3" double E chucks

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Shm
Used unwind for sale, Manufacturer: SMH, Functionality: Shaftless floor pickup, Max diameter: 60", Max roll width: 64”, Capacity: 4500lbs, s:, -3” Double E chucks, -Wichita brakes, Manufacturer SHM Condition Used Stock Number 904477.001PF.

Double E #125960-B2433-5, unwinding & slitting system, 2013

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Double E
Model: 125960-B2433-5
Year: 2013
903392, One (1) Used 80" Wide Double E Slitting Section, Originally built in 2013, The maximum working width is 80", It comes two (2) Mario Cotta Gold Series pneumatic knife holders with mounting equipment and extra blades., Original control panel for the original line included, Manufacturer DOUBLE E Model ...more

Ruian Sunlight #SLT-SR1600, High Speed Cutter, 67" capacity, 4.5 kW, 480 V, 2018

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Ruian Sunlight
Model: SLT-SR1600
Year: 2018
Inventory No. 1025-157-0013 Manufacturer Ruian Sunlight Model No. SLT-SR1600 Name High Speed Cutter Arrival Date 11-03-2025 Dimensions L x W x H (inches) 66 x 110 x 57 Capacity 67" Electrical 480V Weight (lb.) 2370 Category Printing Condition Used Available Quantity 1 Serial No. 2018063103 Make Year 2018.

Ruian Sunlight Machinery Factory #SLT-SRC, Slitter, 22" capacity, 1.5 kW, 480 V, 2018

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Ruian Sunlight Machinery Factory
Model: SLT-SRC
Year: 2018
Inventory No. 1025-157-0114 Manufacturer Ruian Sunlight Machinery Factory Model No. SLT-SRC Name Slitter Arrival Date 12-03-2025 Dimensions L x W x H (inches) 29 x 64 x 41 Capacity 22" Electrical 60/480 Weight (lb.) 500 Category Fabrication Condition Used Available Quantity 1 Serial No. 2018063102 Make Year 2018 Item ...more

Jagenberg #SE-15, 87" shaftless floor pick up unwind stand, 60" OD, pneumatic brakes, edge guide

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Jagenberg
Model: SE-15
904109.007, One (1) used Used 87" Jagenberg SE-15 Shaftless floor pick up with 60" OD roll capacity. Pneumatic brakes., Edge guide. Hydraulic power pack. 9000 lb. Capacity. Well Maintained. Manufactured 1998., Manufacturer JAGENBERG Model SE-15 Condition Used Stock Number 904109.007-1PF.

Gloucester GEC #1041S, 104" back to back center wind, single turret winders, 2003 (2 available)

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gec
Model: 1041S
Year: 2003
(2) Used 104" Gloucester Model 1041S Back to Back Center Wind, Single Turret Winders., Manufacturer: Gloucester, Model: 1041S, Year: 2003, Includes common nip roll assembly, Includes (8) total Tidland air shafts. (4) 3" OD, and (4) 6" OD available., 2003 GLOUCESTER 1041S.

NJM-CLI #326VLRDBP, Wrap Around Labeler, Stainless Steel, label printer, label feeder and waste web rewinder

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Njm
Model: 326VLRDBP
Used NJM-CLI wrap-around labeler, model 326VLRDBP, stainless steel construction, with label printer, label feeder and waste web rewinder, touchscreen controls, 230 volts, serial# 5141. As Is.

Electric motorized rewinder, 2500 lb. capacity, 16" width, manual mandrel expansion, 18"-24" ID, #69164

Yoder Machinery Sales | Holland, OH
Category: Coil Winders
Seller: Yoder Machinery Sales
Location: Holland, OH
ELECTRIC MOTORIZED RE-WINDER, CAPACITY. 2500LBS EST., COIL WIDTH. 16", MANDREL EXPANSION. MANUAL, COIL ID RANGE. 18" - 24", COIL ROTATION. MOTORIZED, CONTROLS. NO.

Black Clawson, 65" turret unwind, 50" diameter with splicer

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Black Clawson
64" Black Clawson turret unwind with mdl 611 dual direction spicing., 48" max roll diameter, Regenerative drives on system, Max roll weight: 3500 lbs, Unit has turret indexing drive, Dual serrated tooth cut-off knives, Splicing can be done both over and under, Unit built in 2000, Serial # E-385568, * Black Clawson ...more

Turreted unwind stand, shaftless floor pick up, 50' wide, 72" dia., disc air brakes

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
50" WIDE TURRET UNWIND STAND, 72" DIAMETER, DISC AIR BRAKES, Shaftless floor pick up stand. 2 roll position. Pneumatic and 480v 3 phase. Works well. Can fit 10-12" cores and 4-8" cores. (other sizes require different chucks), Can lift around 5000 Lbs., Manufacturer TURRETED UNWIND STAND Model SHAFTLESS FLOOR PICK UP ...more

Accraply #350W, Wrap-Around Labeler, w/ rewinder, 3.5" width x 192" L, 115 V., 1996

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Accraply
Model: 350W
Year: 1996
Used Accraply wrap-around labeler, model 350W, with controls and label webbing rewinder, 3.5" wide x 192"L conveyor, 115 volts, built 1996.

Pouch Machine, Ro-An #PS-5500, Servo system, 60-100 bags/minute

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Ro-An
Model: POUCH MACHINE
One (1) Used Ro-An Pouch Machine Model PS 5500, Finished Width: 30", Unwind stand: 60" wide, 40" diameter, 6" shaft, Inline operations: Zipper, folder, 5 cross sealers, gussetter, 2 side sealers, end of line conveyor, 60-100 bags/minute, Servo system, 440-480v, 3 phase, 60hz, Under power can be demonstrated, price ...more

Custom unwind stand, 50" wide, 4" dia shaft, 52" unwind diameter, air brake

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Model: CUSTOM UNWIND STAND
Used 50" wide Custom unwind stand, 4" diameter shaft, 52" unwind diameter, air brake., Condition Used Stock Number 904574.

57" SHM #1400, single rotary sheeter, 55" unwind

Global Equipment International | Chalfont, PA
Category: Paper Sheeters
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Shm
Model: 1400
57" SHM Model 1400 Single Rotary Sheeter, Unwind OD: 55", Cutting head blade is 57" wide., Machine serial Number - 3A/142, Machine card index number - SC124, The overall footprint of the machine when set up is 31'(L) X 7' X 8"(W) X 7'(H)., Unwind Stand - 7' X 10' X 7, Machine - 15' X 7' 8" ...more

MacFab Fourdrinier paper machine, 180", 156" trim, 2200 FPM, new drive system in 2008

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Macfab
156" (3.92M) TRIM FOURDRINIER PAPER MACHINE 2,200 FPM, MacFab S/S Air Pad HeadBox (2013) With Honeywell Model ProFlow II Position Automatic Profile, 50 - 235 GSM, Dilution System installed New in 2013., Cantilevered Fourdrinier S/S Table with (11) Suction Boxes, Suction Couch Roll 194" Face, Dandy Roll, 1st Press ...more