Buy or Sell Your G3516 Engines
AI-ranked results for g3516 - closest matches first
30 KW Caterpillar #XQ35, portable generator set, 6280 hours, trailer mounted, 2021
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: XQ35
Year: 2021
MANUFACTURER: CaterpillarMODEL: CAT XQ-35ENGINE MANUFACTURER: CaterpillarKW: 30 KWCONDITION: UsedYEAR: 2021HOURS: 6280RPM: 1800Serial No: JK800890Reference: UC241535KVA; 2021 CAT XQ35 PORTABLE GEN SET W/ 6280HRS TRAILER mounted, CAT PKGE.
35 Ton, Bliss #C-35, gap frame punch press, 3" stroke, 11-3/4" Shut Height, s/n #H77177, 1998
Holland Equipment Hunters Inc | Hamilton, MI
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Bliss
Model: C-35
Year: 1998
Type:Press, Presses, Gap FrameManufacturer:BLISSModel:C-35Condition:GoodYear:1998Stock #:2002Status:For SaleSerial #:H77177, Shadow Light Curtains, Palm Buttons.
30 KW Caterpillar #XQ35, Mobile Generator, Diesel Type, Sound Attenuated, T4F Emissions, Qty. 9, 36 HP, Multi Voltage, 5793-9835 Hrs., 2020
McKain Power Systems Consulting LLC | Katy, TX
Category: Diesel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Caterpillar
Model: XQ35
Year: 2020
Caterpillar XQ35 Mobile Generator – 27KW Prime/30KW Standby – 36HP – Cat C2.2 Engine – Multi Voltage – Sound Attenuated Enclosure – 2020 DOM – 9 Units Available – Hours Range from 5793 – 9835, MPS#: MPS1629-1637Price: Call For PricingCapacity: 27KW Prime/30KW ...more
27 KW Caterpillar #XQ35, diesel generator set, 120/208 Volts, .3-phase, 5793 hours, 36 HP @ 1800 RPM, 2.2T engine, Tier 4F, sound attenuated enclosure, 2020
DEPCO Power Systems | Houston, TX
Category: Diesel Generators
Seller: DEPCO Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: XQ35
Year: 2020
Generator Set Type: Rental Grade Engine Model: 2.2T Fuel Type: Diesel Voltage: 120/208 Model: XQ35 Panel: with Autostart and Safety Shutdowns Batteries: Yes Hours: 5793 Since New Frequency: 60 Cycles/Hz Phase: Three Phase.
30 kW, Caterpillar #XQ35, generator, Tier 4F, trailer mounted w/ base tank, sound attenuated enclosure, 10 hours, 2024 (6 available)
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
JUST ADDED!
30 KW Caterpillar #XQ35, rental diesel generator set, 630 hours, S/N J4H00629, Tier 4F engine, sound attenuated enclosure, trailer mounted w/ base tank, 2024
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
JUST ADDED!
30 KW Caterpillar #XQ35, rental diesel generator set, 756 hours, S/N J4H00364, Tier 4F engine, sound attenuated enclosure, trailer mounted w/ base tank, 2024
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
JUST ADDED!
30 KW Caterpillar #XQ35, rental diesel generator set, 765 hours, S/N J4H00642, Tier 4F engine, sound attenuated enclosure, trailer mounted w/ base tank, 2024
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
JUST ADDED!
30 KW Caterpillar #XQ35, rental diesel generator set, 701 hours, S/N J4H00646, Tier 4F engine, sound attenuated enclosure, trailer mounted w/ base tank, 2024
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
JUST ADDED!
30 KW Caterpillar #XQ35, rental diesel generator set, 16 hours, S/N J4H00621, Tier 4F engine, sound attenuated enclosure, trailer mounted w/ base tank, 2024
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
JUST ADDED!
30 KW Caterpillar #XQ35, rental diesel generator set, 445 hours, S/N J4H00624, Tier 4F engine, sound attenuated enclosure, trailer mounted w/ base tank, 2024
Carter Machinery Co Inc | Elkridge, MD
Category: Diesel Generators
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Caterpillar
Model: XQ35
Year: 2024
35 KW Caterpillar #XQ35, diesel generator set, 551 hours, S/N JK800899, 2021
Empire Power Systems | Phoenix, AZ
Category: Diesel Generators
Seller: Empire Power Systems
Location: Phoenix, AZ
Mfr: Caterpillar
Model: XQ35
Year: 2021
Caterpillar #XQ35, portable diesel generator set, multi-volt, 6917 hours, C2.2 engine, EPA Tier 4, sound attenuated enclosure, 43 gal. subbase fuel tank, 2018
Midwest Engines & Generators | Edinburgh, IN
Category: Diesel Generators
Seller: Midwest Engines & Generators
Location: Edinburgh, IN
Mfr: Caterpillar
Model: XQ35
Year: 2018
This 2018 Caterpillar XQ35 portable diesel generator set is a versatile and modern Tier 4 Final power solution designed for rental, construction, events, and commercial jobsite applications. The unit is rated 30 kW standby and 27 kW prime at 60 Hz, operating at 1800 RPM, and is powered by a reliable CAT C2.2 diesel ...more
5" x 5" x 3.8" Piranha #P3-50, Hydraulic Ironworker, 50 Ton, 10" x 17" table, 8" throat, 9-1/4" open, 4-1/4" stroke, 1998
Revelation Machinery | Chicago, IL
Category: Ironworkers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Piranha
Model: P3-50
Year: 1998
Make: Piranha, Model: P3-50, Year: 1998, Machine Location: Texas, All capacities rated for mild steel (60,000 PSI tensile strength), Punch:, Throat depth- 8”, Closed height without die block- 13-1/2”, Open height- 9-1/4”, Stroke- 4-1/4”, Speed @ 1/2″ stroke- 60 S.P.M., Table size- ...more
Milltronics #HM35, horizontal machining center, Milltronics 7200 Control, 51" X.35" Y, 25" Z, 8000 RPM, 30 side mount tool changer, 2008
Belmont Machinery Co | Aurora, IL
Category: Horizontal CNC Machining Centers
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Milltronics
Model: HM35
Year: 2008
Size HM35 Make MILLTRONICS Year 2008, ONE USED-MILLTRONICS HORIZONTAL MACHINING CENTER.
16" x 1.5" x 1/4" Eagle #BA35-CNC, CNC Programmable 3-Roll Driven Angle Roll Bender, Auto Repeat, 13 FPM, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Angle Bending Rolls
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Eagle
Model: BA35-CNC
Eagle BA35 CNC Programmable 3-Roll Driven Angle Roll Bender, Inventory # 7827, Model: BA35 CNC, Capacity:, Flat Bar, Hard Way: 2″ x 3/8″, 14″ Min. Diameter, Flat Bar, Easy Way: 3 1/2″ x 5/8″, 16″ Min. Diameter, Solid Square: 1 1/4″, 16″ Min. Diameter, Angle, Leg-Out: 1 ...more
25" x 8" Cantek #GT-635ARD-8, Straightening Planer/Facer, 12.2" min. L, 25 HP Top, 20 HP Bottom, 5400 RPM, 80 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cantek
Model: GT-635ARD-8
Year: 2026
CANTEK - GT635ARD-8 25″ Double Surface Planer25″ Wide x 8″ thickness capacity Add on $2,500 for increase HP of top head to 30 HPs: -- Cutterheads are spiral insert types with six (6) rows of carbide inserts. -- (2) Driven and (1) idle bedroll for superior feeding of even difficult material. -- ...more
Daewoo Doosan #BM-2035M, gantry type machining center, Fanuc 31iB, 137.8" X Travel, 80.7" Y Travel, 31.4" Z, 12000 RPM, 40 automatic tool changer, thru spindle coolant, 2017
Premier Equipment Inc | Altamonte Springs, FL
Category: Gantry Type Machining Center
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Daewoo Doosan
Model: BM-2035M
Year: 2017
Doosan BM-2035M Gantry type machining centerTable size : 72.8” x 137.8”Load Capacity: 10 tonXYZ : 137.8” x 80.7” x 31.49”Distance between columns : 86.61”Table to spindle nose : 7.87” – 39.37”Spindle speed : 12,000 rpmMain motor : 35 / 40 HPTaper: 50 taperNo. of ...more
.472" x 3.937" Formax #FX35M, 5-die progressive header, 1997, electrical upgrade 07/2021
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Formax
Model: FX35M
Year: 1997
FORMAX M#FX35M 5 DIE PROGRESSIVE HEADER, 1997 VINTAGE, HEADING TONNAGE. 50, TOTAL HEADING LOAD (METRIC TONS). 70, STROKES PER MIN. - SINGLE SPEED. 300, STROKES PER MIN. - VARIABLE SPEED. 100/300, CUTOFF DIAMETER (85,000 PSI).472, CUTOFF LENGTH (MIN./MAX.).236/3.937, KICKOUT STROKE - DIE (MIN./MAX.).315/2.953, KICKOUT ...more
4 GPM Union #P358, Single Stage Centrifugal Oil Transfer Pump Package, 15 HP, 3510 RPM, 547 psi, 460 V., 1989
IronHub | Calgary, AB
Category: Oil Transfer Pumps
Seller: IronHub
Location: Whitecourt, AB
Mfr: Union
Model: P358
Year: 1989
This reliable electric-driven oil transfer pump, model P358 by Union, is designed for sour service with a max pressure of 547 psi. Built in 1989 and housed in a heated building, it operates at 3510 RPM on a three-phase power supply (460 volts). With a capacity of 23 m3/d and ANSI ratings of both inlet and outlet at ...more
3000 Amps, Allis-Chalmers, FA-350B
National Power Equipment Inc. | Brook Park, OH
Category: Medium Voltage Air Circuit Breakers
Seller: National Power Equipment Inc.
Location: Brook Park, OH
Mfr: Allis-Chalmers
Model: FA-350B
3000 Amp, SIEMENS, FA-350B, 4160 Volts, 41 KA EO/DO, 125 VDC CL/TR/MOT
Belyea Company Inc | Easton, PA
Category: Medium Voltage Air Circuit Breakers
Seller: Belyea Company Inc
Location: Easton, PA
Mfr: Siemens
Model: FA-350B
Year: 1979
CB-17809, (1EA) 3000 AMP SIEMENS ALLIS AIR CIRCUIT BREAKER, TYPE FA-350B, 4160 VOLT, 4760 MAX. VOLT, 1.19 VOLTAGE RANGE K FACTOR, 5 CYCLE INTERRUPT, 41 KA SHORT CIRCUIT, 60 KV BIL, 1750 LBS., INST. BOOK 18X-5930, PARTS LIST 18X-5931, FOR USE IN TYPE D SWITCHGEAR, STORED ENERGY OPERATOR TYPE 515-3, 125 VDC ...more
Nash #XL35/5, Vacuum System w/Receiver & Heat Exchanger, carbon steel, 10 HP, 2015
Federal Equipment Company | Cleveland, OH
Category: Vacuum Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Nash
Model: XL35/5
Year: 2015
Used 10 HP Nash vacuum system, model XL35/5, with receiver and heat exchanger skid mounted test# 1500136, built 2015.
DMC #DL-35, CNC Turning Center, 3-Jaw 15" chuck, 10 pos. turret,Fanuc Oi-TD,S/n: L35s0023, 2013
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Dmc
Model: DL-35
Year: 2013
Rated Voltage AC200/220V, 50/60Hz, 3Ph Rated Power Capacity 45 kVA Rated Current 150A Machine Weight 8500 kilograms, * FANUC SERIES Oi-TD CONTROLS, * 15" 3-JAW CHUCK, * 10-POSITION TURRET, * 5" BORE, * TOOL PRESETTER, * TAIL STOCK, * CHIP CONVEYOR.
Pearson #CE35G-RTL, Glue Case Erector, 35 Cases/min., 23-1/2" L x 16" W x 18-1/2" D Case Capacity, AB controller
Frain Industries | Carol Stream, IL
Category: Case Erectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pearson
Model: CE35G RTL
Pearson, Model CE35G, automatic, case erector and hot melt glue bottom sealer. Rated from 5 to 35 cases per minute – depending on materials, application and machine configuration. Case size range: 6" to 23½" in Length; 5" to 16" in Width, 3½" to 18½" in Depth. ...more
JUST ADDED!
35 Ton, Bliss #C-35, OBI Press, w/Foot Pedal, 230/460 V
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Bliss
Model: C-35
Inventory No. 0226-137-0004 Manufacturer Bliss Model No. C-35 Name Obi Press Arrival Date 03-05-2026 Dimensions L x W x H (inches) 57 x 50 x 98 Capacity 35 TON Electrical 3/60/230/460 Weight (lb.) 5200 Category Fabrication Condition Used Available Quantity 1 Item W/ Foot Pedal.
3.5" Dynisco #EH35, Hydraulic Slide Plate Screen Changer, dual break plate less breaker plates, 2HP hyd.pwr.pack, #45465
Federal Equipment Company | Cleveland, OH
Category: Screens and Sifters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Dynisco
Model: EH35
Used 3.5" Dynisco hydraulic slide plate screen changer, model EH35, dual break plate less breaker plates with 2 hp hydraulic power pack, serial# EH35167.
3000 Amp, ITE, 5HK-350, 4160 Volts, 125 VDC, electrically operated, drawout
Belyea Company Inc | Easton, PA
Category: Medium Voltage Air Circuit Breakers
Seller: Belyea Company Inc
Location: Easton, PA
Mfr: Ite
Model: 5HK-350
Year: 1971
CB-16361, ONE (1) 3000 AMP ITE 5HK-350 AIR CIRCUIT BREAKER, 4160 VOLT, 350 MVA, 4.76 KV MAX., 125 VDC CLOSE & TRIP, MFG. 1971, ELECTRICALLY OPERATED, DRAWOUT.
Extek #EH-35, 3.5" screen changer with hydraulic power pack, serial #EH 3553
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Extech
Model: EH-35
3.5" Extek Screen Changer With 2 HP Hydraulic Power Pack Model EH-35 S/N EH 3553 Approximate Dimensions: Screen Changer: 46" Lx 14" W x 16" H Hydraulic: 36" L x 30" W x 40" H Quoted And Sold As-Is.
Fanuc, CR-35, R30iB+ Cobot, (2 available)
D & B Industrial Sales Inc | Rush City, MN
Category: Industrial Robots
Seller: D & B Industrial Sales Inc
Location: Rush City, MN
Mfr: Fanuc
Model: CR-35
Mazak #QT-350, Mazatrol 640 control, 26" swing, 48" centers, 4" bar capacity, 35 HP, 12 station turret, tailstock
HTR Global Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Mazak
Model: QT-350
Year: 2001
MAZAK QUICK TURN 350, Model Quick Turn 350, CNC control Mazatrol 640T, Serial number 156012, Year of manufacture 08/2001, Chuck SMW Autoblok air chuck, 315-105 (4”), Maximum bar capacity 4”, Swing 26”, Max machining diameter 16”, Center distance 48”, Turret 12 station, Automatic tool eye ...more
New open box sealmaster np-35 pillow block bearing bore: 2-3/16" stock 2152-a
GEI Surplus | Chalfont, PA
Category: Ball & Roller Bearings
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Sealmaster
Model: NP-35
1050 HP E.I. #FE665B-2, reciprocating compressor, Caterpillar G3516TAW-LE NG engine, 1994
IronHub | Calgary, AB
Category: Reciprocating Gas Compressors
Seller: IronHub
Location: Calgary, AB
Model: FE665B-2
Year: 1994
Available for sale is a 1994 Energy Industries manufactured 1050HP reciprocating compressor package, featuring a Caterpillar G3516TAW-LE driver. This portable unit operates on natural gas and is designed for sweet service with two stages and two throws. It includes a cylinder size of 13.0"-7.5" and has been ...more
Summit #VS-350B, 10" x50" tbl., 3 HP, variable speed, 60-4200 RPM, R-8, box ways, coolant, X-Axis power feed, one shot lube
C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Summit
Model: VS-350B
(NEW) SUMMIT VERTICAL MILLING MACHINE, MODEL: VS-350B, FACTORY, Heavy Duty Cast Iron Construction, Heavy Box Saddle, Table Size: 10" x 50", Longitudinal Table Travel: 36", Cross Table Travel: 16", Spindle Speeds, Variable: 60-4200 RPM, Spindle Taper: R-8, Spindle Travel: 5", Spindle Feed Range:.0015",.003",.006", Head ...more
35 Ton, South Bend Johnson #OBI-35, 11" Shut Height, 2-1/2" adj. slide, 2-1/2" stroke, 24" x 15" bed, 150 SPM, s/n 77019
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: South Bend
Model: OBI-35
Capacity 35 tons Shut Height 11 inches Slide Adjustment 2.5 inches Stroke 2.5 inches Bed Area 24" x 15" Ram Area 10.25" x 8" Strokes Per Minute 150 Motor 208 Volts, 60HZ, 3 Phase, NOTES:, SUBJECT TO VERIFICATIONS, DELIVERY:, IMMEDIATE, SUBJECT TO PRIOR SALE.
Mori Seiki #SL-35A, CNC Lathe, 10" chuck, Chip Conv., 220 V., 1990
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Mori Seiki
Model: SL-35A
Year: 1990
Inventory No. 0126-028-0002 Manufacturer Mori Seiki Co Model No. SL-35A Name CNC Lathe Arrival Date 01-22-2026 Dimensions L x W x H (inches) Unavailable Electrical 3/60/220 Weight (lb.) 16965 Category CNC Condition Used Available Quantity 1 Make Year 1990 Item W/10" 3 Jaw Chuck, Hydraulic Unit, Chip Conveyor, Parts ...more
14" Mitutoyo #PH-350H, Comparator, 5-7/8" x 16-5/8" Table, 1.96" Focusing Range, 10x Lense
AM Metalmaq Inc | Hialeah, FL
Category: Optical Comparators
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Mitutoyo
Model: PH-350H
Model number PH350H, Code number 172-101-4, Screen diameter 14" (350mm), Work table size 5-7/8" x 16-5/8", Longitudinal travel (X) 6", Vertical travel (Y) 4", Optical focusing range 1.96", Weight, approximate 200 lbs., S:, 10X lens, Mitutoyo dial indicator in Y axis (0.001"), Contour and surface illuminator, Graduated ...more
SW #BA35, Machining Center Longbed CNC, 1995
Lenmark Industries | Langley, BC
Category: Vertical CNC Machining Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Sw
Model: BA-35
Year: 1995
SKU: 105903, Model: BA 35, Year: 1995, Condition: Used, Electrical :, Voltage: 400 volts, Phase: 3-phase, Amps: 70 amps, CNC: Yes, Additional :, X-AXIS Movement: 750 mm // 29.50", X-AXIS Rapid traverse: 0-25 m/min, Y-AXIS Movement: 500 mm // 19.68", Y-AXIS Rapid traverse: 0-25 m/min, Z-AXIS Movement: 500 mm ...more
Nordson/Xaloy #WRP35S, water ring pelletizer, 1725 RPM, Fr.184C, 2009
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Xaloy
Model: WRP35S
Year: 2009
Used Nordson/Xaloy Water Ring Pelletizer, Model WRP-35S, New in 2009 3 HP Cutting Head, Baldor Reliance VM3611 AC Motor, S/N: F0906012141 New Cutting Hub 460/3/60, 4.1A 1725 RPM, Frame: 184C 5 HP Carter Day Sing Dryer, 42” H x 10” Diameter, 2 Screens Previously Running Polystyrene 7.5 HP Goulds Slurry ...more
1035 CFM @ 150 PSI, Sullair #E1035, Electric air compressor, 250HP, trailer mount, 1 hours, 2024 (4 available)
Carter Machinery Co Inc | Elkridge, MD
Category: Portable Air Compressors
Seller: Carter Machinery Co Inc
Location: Elkridge, MD
Mfr: Sullair
Model: E1035
Year: 2024
Fanuc, CR-35IA, Collaborative Robot w/End of Arm Vision & R-30IB Controller, 35 kg Payload
iGAM | Detroit, MI
Category: Industrial Robots
Seller: iGAM
Location: Detroit, MI
Mfr: Fanuc
Model: CR-35IA
Year: 2015
This used FANUC CR-35iA collaborative robot with R-30iB controller and end-of-arm vision system is an advanced industrial automation solution offering high payload capacity and safe human-machine interaction. With a 35 kg payload, the CR-35iA delivers the heaviest load handling in its class among collaborative robots. ...more
Griggio #C350, gang rip saw, pressure rollers / hold downs, 2.786" arbor diameter, 10"-16" blade diameter, 1996
Equipment Hub | Stone Mountain, GA
Category: Gang Rip Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Griggio
Model: C350
Year: 1996
Stock #: 181260006, Location: Columbus, Ohio, Brand: Griggio, Model: C350, Year: 1996, Approx. Shipping Weight: 4,533 Lbs., Approx. Shipping Dimensions: 10' L x 6' W x 6' H, Loading Fee: Rigging Required, Arbor / Track Width: 13.75", Maximum Cutting Width: 13-14", Maximum Depth of Cut: 4-5" ...more
Fisher FS3582-1-A Valve Positioner 3582 NEW UNIT STOCK CC162
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Park Falls, WI
Mfr: Fisher
Model: FS3582-1-A
Fisher FS3582-1-A Valve Positioner 3582 NEW UNIT STOCK CC162.
14" Starrett Sigma #HB350, comparator, 15.35" x5" table area, 10x lens, 1° gradulations, #76431
Yoder Machinery Sales | Holland, OH
Category: Optical Comparators
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Starrett
Model: HB350
SERIAL., MODEL. HB350, SCREEN DIAMETER. 14", GRADUATIONS. 1 DEGREE, TABLE AREA. 15.35" X 5", X AXIS. 4.1", Y AXIS. 8", FOCUS. 1.5", LENS POWER. 10X, FIELD. 1.40", QUADA CHECK UNITS. YES, PHASE. 1, VOLTAGE. 110.
Ford Econoline #E-350, Cargo Van, 255 HP, 91058 mi, 2013
Revelation Machinery | Chicago, IL
Category: Trucks and Flatbeds
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Econoline
Model: E-350
Year: 2013
Make: Ford, Model: Econoline Van, Year: 2013, Machine Location: North Carolina, This 2013 Ford Econoline E-350 Cargo Van is a proven workhorse built for reliability, durability, and versatility. Perfect for contractors, delivery operations, and service technicians, this van combines ample cargo capacity with ...more
1-1/2" x 1-1/2" x 1/4" Ercolina #CE35, Angle Roll
Smith Machinery Co | Ames, IA
Category: Angle Bending Rolls
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Ercolina
Model: CE35
Pipe (Max.) 1 1/2" Sch. 40 Angle (Max.) 1 1/2" x 1 1/2" x 1/4" Roll Shaft Diameter 40 millimeters Center Roll Positioning Manual Degree of Bend 0-210 Shaft Speed 6-12 RPM Universal Tooling Included - 6 5/8" O.D. Programming Not Available Distance between Shafts 11.375 inches Operating Voltage 220V, 1 PH Dimensions ...more
35 Ton, Baileigh #HSP-35A, hydraulic shop press, 2.75" stroke, 31" x10.5" table
Smith Machinery Co | Ames, IA
Category: H Frame Hydraulic Press Machines
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baileigh
Model: HSP-35A
Table Size 31" x 10.5" Base Size 34" x 29.5" Piston Head Diameter 3 inches Movable Cylinder yes Movement Table Travel 22.375 inches Ram Size 3 inches Working Width 31 inches Stroke (Screw) 2.75 inches Stroke Distance (Per Pump) 0.045 inches Maximum Capacity 35 tons Cylinder Stroke 4.25 inches Power Manual Shipping ...more
35 Ton, Denison #Multipress-LA35C, hydraulic, 15" stroke, #A3563
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Denison
Model: MULTIPRESS-LA35C
Stroke 15" Tonnage 35 Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. WEIGHT 15,000 Lbs. s Note: This Machine Was Once Set Up With Continuous Mode. This Has Been Disabled. Manual Hand Lever Control Only. Safety Guards C94 Automatic Valve Manual Lever Control Tonnage Regulator.
Incofab #SCR-35-SR, in line wire heater, .080"-.750"wire, 35 KVA, brand new
Hariton Machinery Co Inc | Bridgeport, CT
Category: Wire Heaters
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Incofab
Model: SCR-35-SR
One Brand New Incofab Model SCR-35-SR In Line Wire Heater,.080"-.750" Approx. Wire Size, 35 KVA Rating, 2 to 750 Capacity in Lbs. to 575 F./hour ( based only on ferrous materials), This machine is Slider & Roller contact., Electrical Information, Single Phase, 440 Volts 80 Amps, Or 220 Volts 175 Amps, 60 Hertz ...more
30" Pratt & Whitney #M1835, vertical rotary table
R.A.B. Industries Inc | Washington, MI
Category: Rotary Tables
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Pratt & Whitney
Model: M1835
1-USED PRATT & WHITNEY MODEL M-1835 30" VERTICAL ROTARY TABLE, SERIAL NUMBER 0115, STK# 103215, ===============================================================, WHILE OBTAINED FROM SOURCES DEEMED, RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE, AND TO VERIFICATION BY BUYER.
35 Paul O Abbe #RB-35, Double Spiral Ribbon Blender,, 33.4" width x 59.1" L x 37.4" D trough, 304 Stainless Steel, food grade, 25 HP, 230/460 V., New
Aaron Equipment Co | Schaumburg, IL
Category: Ribbon Mixers and Blenders for Food
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Paul O Abbe
Model: RB-35
new & in stock- paul o. abbe, model rb-35 ribbon blender. in -stock.35 cubic foot working capacity. 39 cubic foot total volume. type 304 stainless steel polished. food grade. all stainless steel construction. trough dimensions: approximately 33.4" wide x 59.1" long x 37.4" deep. internal double spiral ribbon. ...more
35" wide x 32' long, Dura-Quip #VC-3532, Vibrating Conveyor, 7" deep pan, 1/4" round holes punched plate, 10 HP
Ex-Factory | Charlotte, NC
Category: Conveyors Vibratory Feeders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dura-Quip
Model: VC-3532
DURA-QUIP - VC-3532,.Vibrating Conveyor: -- :35" Wide x 32' Long; Pan is 7" deep and has 1/4" round holes punched plate in most of length to allow sawdust to drop outside of Conveyor. -- Bottom frame is filled with concrete 12" deep and rests on coil springs to isolate vibration from the ground. Buyer to replace ...more
Summit #VS-350B, vertical milling machine, 10" x50" table, 3 HP, Fagor digital read out, pneumatic draw bar, 2011
Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Summit
Model: VS-350B
Year: 2011
SUMMIT VS-350B Vertical Milling Machine DRO 2011’ # 7374, SUMMIT VS-350B Vertical Milling Machine DRO 2011’ # 7374, Reference # 7374, Model # VS-350B, Serial # 8048, Year of manufacture- 2011’, Spindle speeds- 60 – 4200 R.P.M., Spindle Taper- R-8, Spindle travel- 5”, Spindle feeds- ...more
35 Ton, Stamtec #G1-35, single crank gap frame press, 2.76" stroke, 8.66"Shut Height, 14.17"x9.84"ram, 31.5"x15.75"bed, 40-120 SPM
Great American Eqpt Co | Cincinnati, OH
Category: Gap Frame Single Crank Press Machines
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Stamtec
Model: G1-35
Year: 1998
35 TON STAMTEC SINGLE CRANK GAP FRAME PRESS, Model G1-35, S/N 9730-S70654, New 1998, Stock# Q11680, Stamtec Press Control, LINK System 1100 Tonnage Monitor, Dual Palm Buttons, Inch / Single / Continuous Modes, Hydraulic Overload., CATALOG :Tonnage Capacity 35 Ton Stroke Length 2.76" Adjustment 2.17" Shut Height 8.66" ...more
Pearson #CE35G-RTL, automatic, inline, case erector and hot melt glue bottom sealer rated from 10-35 cases per minute
Frain Industries | Carol Stream, IL
Category: Case Erectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pearson
Model: CE35G-RTL
Pearson, Model CE35G, Automatic, inline, case erector and hot melt glue bottom sealer rated from 10 to 35 cases per minute – depending on materials, application and machine configuration. Mild steel construction with standard powder coat flint grey fine texture coating. Case size range: 6" to ...more
Summit #V350, vertical mill, 10" x50" tbl., 2 HP, 16" X, 32" Y, 16" Z, R-8, 78-4800 RPM, X-Axis power feed
Greenway & Associates Ltd | Orange City, IA
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Summit
Model: V350
, X axis power feed, Manufacturer Summit Vertical Milling Machine Model V350 Condition Used Serial Number 4951 Stock Number 10874 Table size 10" x 50" Table travels 16" x 32" Knee travel 16" Quill travel 5" Quill taper R-8 Main motor 2 HP, step pulley Spindle speeds 78-4800 RPM Quill ...more
35000 lb. Minster #MCC-35, traveling coil load car, 72" OD
Nidec Press & Automation | Macomb, MI
Category: Coil Cars
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Minster
Model: MCC-35
Coil weight capacity: 35000 pounds, Coil O.D. capacity: 72 inches.
Illinois Tool Works AMP #T-350, double miter saw
iGAM | Detroit, MI
Category: Woodworking Saws
Seller: iGAM
Location: Detroit, MI
Mfr: Illinois Tool Works
Model: T-350
ITW AMP T 350 woodworking table saw in used condition. This reliable saw is ideal for woodworking enthusiasts seeking quality performance in their projects., Spec Sheet, ITW AMP T 350, Dimensions. 40X39X66, Weight. 988lbs.
1200 Amps, Allis-Chalmers, SO-35D1, electrically operated, drawout, #AB4057
RESA Power Solutions | Cerritos, CA
Category: Medium Voltage Air Circuit Breakers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Allis-Chalmers
Model: SO-35D1
Allis Chalmers Circuit Breaker, Air Breakers type, Catalog Number SO-35-D1, 1200 amp frame current, 5000 volts, Electric operation, Drawout mounting.
Mori Seiki #SL-35MC, CNC Lathe, 220 V., 15" chuck, MT-T6 Control, Chip Conv., 220 V.,
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Mori Seiki
Model: SL-35MC
Inventory No. 0126-068-0001 Manufacturer Mori Seiki Co Model No. SL-35MC Name CNC Lathe Arrival Date 02-03-2026 Dimensions L x W x H (inches) Unavailable Electrical 3/60/220 Weight (lb.) 17875 Category CNC Condition Used Available Quantity 1 Serial No. 188 Item W/15" 3 Jaw Chuck, Mt-t6 Control, Tailstock ...more
JUST ADDED!
Pearson #CE35, Case Erector, AB panelview plus 600
HGR24 | Euclid, OH
Category: Case Erectors
Seller: HGR24
Location: Euclid, OH
Mfr: Pearson
Model: CE35
Inventory No. 0226-023-0025 Manufacturer Pearson Packaging Systems Model No. CE35 Name Case Erector Arrival Date 02-10-2026 Dimensions L x W x H (inches) Unavailable Electrical 3/60/460 Weight (lb.) 3025 Category Packaging Condition Used Available Quantity 1 Serial No. 2007CE3511480 Item 5 Kva, Allen Bradley Panel ...more
Ingersoll-Rand #C35, start up compressor, 800 HP, AIWI NPA
EcReCon Inc. | Pedericktown, NJ
Category: Centrifugal Air Compressors
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Ingersoll-Rand
Model: C35
Year: 1976
, LIQUIDATION* Ingersoll-Rand Start-up compressor, type Centac model C35,800Hp motor. "AIWI" NPA, 1976 INGERSOLL RAND C35, HP. 800 hp, ACFM. 0, PSI Outlet. 0 psi, HP. 800, PSI Outlet. 0.
35 Ton, Bliss #C-35, OBI press, 3" stroke, 10.75" Shut Height, 2.5" ram adj., 90 SPM, 27" x17"bed, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: C-35
3" STROKE, 2.5" RAM ADJUSTMENT, 10.75" SHUT HEIGHT, 90 SPM, 27" X 17" BED APPROXIMATE, AIR CLUTCH, AIR BRAKE, PALM BUTTONS, 50" X 60" X 96" T APPROX., 6500 LBS APPROX..
4-1/2" Scotchman #CPO-350, Circular Cold Saw, manual double self-centering-vise, miter w/ lock, NEW
Smith Machinery Co | Ames, IA
Category: Carbide, Friction and Cold Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Scotchman
Model: CPO-350
Round Tubing 90 4.5 inches Round Tubing 45 4 inches Round Solid 90 2 inches Round Solid 45 1.75 inches Square Tubing 90 4 1/4" X 4 1/4" Square Tubing 45 4" X 4" Square Solid 90 2" X 2" Square Solid 45 1 3/4" X 1 3/4" Rectangle Tubing 90 5 1/2" X 4" Rectangle Tubing 45 4" X 4", S:, * Manual Double Self-Centering ...more
12" HP Valves/Key Valve Technologies #P200-700TD/SB V35, Parallel Slide Gate Valve w/Actuator, 24 V, 2014
Lenmark Industries | Langley, BC
Category: Gate Valves
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Hp Valves/key Valve Technologies
Model: P200-700TD/SB V35
Year: 2014
SKU: 100736, Model: P200-700TD/SB V35, Year: 2014, Condition: Surplus New, S/N: 140013104003, Dimensions: 41.00 (H) x 39.00 (W) x 144.00 (L) inches, Additional :, Control Valve Spec, Tag #: BDV-34100C, Serial #: 140013104003, Body Model: PSGV, Size / Rating: DN300-12" / 1500 SPL, Material: SA182-F22, Trim: ...more
35 Ton, Bliss #C35, 3" stroke, 11-3/4" Shut Height, 26" x 17" bed area, air clutch, light curtains, 1998
Yeoman Machinery Corp | Elkhart, IN
Category: Gap Frame Single Crank Press Machines
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Bliss
Model: C35
Year: 1998
350 KW Generac #SD0350, diesel generator set, 277/480 Volts, 530 HP @ 1800 RPM, Mitsubishi 8DC9 engine, 149 hours, weatherproof enclosure, 700 gal. sub-base fuel tank, 2002
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Generac
Model: SD0350
Year: 2002
Generac 350 kW standby (315 kW prime) diesel generator set, model SD0350, SN-2069131. Mitsubishi engine rated 530 HP at 1800 RPM, SN-. 3/60/277/480V, 12 lead reconnectable to other voltages. 600 Amp main-line circuit breaker. PMG permanent magnet generator. UL listed stationary engine generator assembly. Generac ...more
Fanuc, CR-35IA, Robot, w/ teach pendant, R-30iB Control, 200/480 V., 2015
HGR24 | Euclid, OH
Category: Industrial Robots
Seller: HGR24
Location: Euclid, OH
Mfr: Fanuc
Model: CR-35IA
Year: 2015
Inventory No. 0925-083-0023 Manufacturer Fanuc Model No. CR-35IA Name Robot Arrival Date 10-02-2025 Dimensions L x W x H (inches) Unavailable Electrical 3/50/60/200/480 Weight (lb.) 3350 Category Robots Condition Used Available Quantity 1 Serial No. E15X34770 Make Year 2015 Item Robot Cr- 35ia (2935#) 45" X 41" X 86" ...more
JUST ADDED!
350 KW Generac #SD350, Diesel Generator, weatherproof enclosure, 275 Hours, 2013
Aaron Equipment Co | Schaumburg, IL
Category: Diesel Generators
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Generac
Model: SD350
Year: 2013
used- generac diesel generator, model sd350. rated 350kw, 438kva. weather enclosure. iveco/fpt engine power: 530 hp @1,800 rpm. 3/60/277/480v. includes 2,000 gallon base tank. 275.4 hours, serial# 7855510, built 2013.
35 Ton, Stamtec #G1-35, gap frame press, 2.75" stroke, 8.66"Shut Height, 2.17"adj., 40-120 SPM, 31" x15.5"bed
G-2000 | Toledo, OH
Category: Gap Frame Single Crank Press Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Stamtec
Model: G1-35
SERIAL.: S60477, MODEL.: G1-35, TONNAGE.: 35, STROKE.: 2.75", SHUT-HEIGHT.: 8.66", ADJUSTMENT.: 2.17", STROKES PER MINUTE.: 40-120, BED SIZE.: 31" L-R X 15-1/2" F-B, Machine Type.Presses, Gap Frame (OBS) Manufacturer.STAMTEC Model.G1-35 Year.N/A Condition.Used.
38.5 Ton, Amada #RG-35S, 3-Axis hydraulic press brake, NC9-EX11 Control, 4.1'OA, 40.2" between housing, 1995
Machine Tool Technologies | Milwaukee, WI
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: RG-35S
Year: 1995
Brand AMADA Model RG-35S ID # 630613 Type Press Brakes Condition Used - Fair Year 1995 Location Illinois, United States Return Policy as-is Stock # LA, Tonnage Capacity: 38 Tons, Overall Bed Length: 49.3", Table Length: 47.3", Distance Between Housings: 40.2", Throat Depth: 7.88", Open Height: 14.58", Stroke Length: ...more
350 HP @ 1760 RPM, Johnson Gear #HH350, 1.00 :1 ratio, 1760 RPM out
EcReCon Inc. | Pedericktown, NJ
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Johnson
Model: HH350
, used JOHNSON GEAR & MFG. gear box. Rated 350 HP model HH350. Ratio 1:1, JOHNSON GEAR & MFG. HH350, HP. 350, Ratio. 1:1, Type. COMPANION, Input RPM. 1760, Output RPM. 1760.
3000 Amps, Allis-Chalmers, FA-350A, electrically operated, drawout, #AB0460
RESA Power Solutions | Cerritos, CA
Category: Medium Voltage Air Circuit Breakers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Allis-Chalmers
Model: FA-350A
Allis Chalmers Circuit Breaker, Air Breakers type, Catalog Number FA-350A, 3000 amp frame current, 5000 volts, Electric operation, Drawout mounting.
8000 lb. Toyota #8FG35U, LPG Gas Solid Pneumatic Forklift, 187" Lift, 7697 Hours, 2015
Bullseye Industrial Sales LLC | Middlebury, IN
Category: Forklifts
Seller: Bullseye Industrial Sales LLC
Location: Middlebury, IN
Mfr: Toyota
Model: 8FG35U
Year: 2015
Condition: Used Brand: 2015 Toyota Model: 8FG35U MPN: N/A Country of Manufacture: United States Capacity (Kg/Lbs): 8000 Fuel Type: LPG Manufacture Year: 2015 Serial #: 11067 Load Height: 187" Tilt (Back & Forward in °): 6.0/12.0 Mast Number of Stages: 3 Tire Type: Solid Pneumatic Fork Size (Length x Width): ...more
14" Kalamazoo #FA350A, automatic cold saw, 5 HP, 6" vise opening, s/n #186, #11726
Vander Ziel Machinery Sales | Alto, MI
Category: Carbide, Friction and Cold Saws
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Kalamazoo
Model: FA350A
Kalamazoo Model FA350A Automatic Cold Saw, Serial # 186, Asset # 11726, Drive Motor 5 HP, Angles 45 Deg. L, 15 Deg. R, Spindle Speeds 1700/3400 RPM, Max. Blade Size 14”, Max. Vise Opening 6”, Capacity – Round at 90 Degrees 5”, Capacity – Square at 90 Degrees 4 ½”, Capacity ...more
Pearson #CE35G-RTL, Glue Case Erector, 35 Cases/min., 23-1/2" L x 16" W x 18-1/2" D Case Capacity, AB controller
Frain Industries | Carol Stream, IL
Category: Case Erectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pearson
Model: CE35G RTL
Pearson, Model CE35G, automatic, case erector and hot melt glue bottom sealer. Rated from 5 to 35 cases per minute – depending on materials, application and machine configuration. Case size range: 6" to 23½" in Length; 5" to 16" in Width, 3½" to 18½" in Depth. ...more
30 Ton, 0.7 oz., Niigata #MD35 SIV, Vertical Rotary Injection Molding Machine, 18 mm screw, 11.8" x 11.8" x plate, 37" rotary diameter, 2003
Arlington Machinery | Lake Zurich, IL
Category: Screw Type Injection Molding Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Niigata
Model: MD35 SIV
Year: 2003
Used 35 Ton Niigata Vertical Rotary Injection Molding Machine, Model MDVR-35SIV, 0.70 Oz, New In 2003 Voltage: 220V S/N: 95071R Machine Dimensions: 2020mm x1270mm x 2900mm Machine Weight: 6,000 Lbs.
14" Kalamazoo #FA-350A, automatic cold saw, non-ferrous, 5" dia. solids, 3 HP
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Carbide, Friction and Cold Saws
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Kalamazoo
Model: FA-350A
KALAMAZOO NON-FERROUS AUTOMATIC FEED COLD SAW, MODEL: FA-350A, SERIAL NUMBER: 419, "The operator loads the stock, adjusts the clamping vises to position, sets the feed unit to the proper length of cut by using the digital readout, sets the number of pieces required and then presses the cycle start switch. The machine ...more
39 Ton Stamtec #OCP-35, OBI Press, 30.7" x 13.4" bed, 3.2" stroke, 70-135 SPM, Omnilink 5100, 2016
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Model: OCP-35
Year: 2016
capacity39 us ton stroke3.2" max die height9.9" over 2.8" hIGH bolster PLATE - STROKE DOWN ADJUSTMENT UP bed area30.7" x 13.4" (rl x fb) speed70 - 135 spm slide adjustment2.2" manual slide area15" x 12.6" (rl x fb) bolster plate30.7" X 13.4" (RL X FB) X 2.8" THICK distance between uprights19.8" WORKING HEIGHT33.3" ...more
14" Mitutoyo #PH-350, horizontal projection optical comparator, 2-Axis digital read out, 10X & 50X lens, surface & contour illumination
Machinery Values Inc | Harrison, NJ
Category: Optical Comparators
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Mitutoyo
Model: PH-350
14" MITUTOYO HORIZONTAL PROJECTION OPTICAL COMPARATOR ** MITUTOYO 2-AXIS DIGITAL READOUT DISPLAY ** MODEL:… PH-350… S/N: 40381… NEW:… 1989 14" DIAMETER SCREEN CONTOUR: 24V 150W HALOGEN LAMP TELECENTRIC ILLUMINATION 2-STAGE BRIGHTNESS SELECTOR SURFACE: 24V 150W HALOGEN LAMP ...more
3000 Amps, Allis-Chalmers, FA-350, stored energy mech., with cells (2 available)
BCS Switchgear Inc | Krugerville, TX
Category: High Voltage Air Circuit Breakers
Seller: BCS Switchgear Inc
Location: Krugerville, TX
Mfr: Allis-Chalmers
Model: FA-350
Emerson rosemount 3535b30g04 adaptor plate assy stock #g-77
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Rosemount
Model: 3535B30G04
Pearson #CE35-20T, automatic right to left, case erector & bottom tape sealer, 10-35 cases per minute
Frain Industries | Carol Stream, IL
Category: Case Erectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pearson
Model: CE35-20T
Pearson, Model CE35-20T, Automatic right to left, case erector and bottom tape sealer. Rated from 10 to 35 cases per minute – depending on materials, application and machine configuration. Case size range: 12" to 30" in Length; 8" to 24" in Width, 10½" to 30" in open Depth. ...more
3500 cfm, Deltech #DE-735, 150 psig, de-deltech, dual bed, skid frame
CCH Equipment Co | Waxahachie, TX
Category: Desiccant Compressed Air Dryers
Seller: CCH Equipment Co
Location: Waxahachie, TX
Mfr: Deltech
Model: DE-735
Diehl #SL-35, Straight Line Rip Saw, 15 HP arbor, 2 HP feed, 50-140 FPM, 2" arbor bore, 19" throat, 3450 RPM arbor, New
RT Machine | Hughesville, PA
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: SL-35
Diehl Model SL-35 Straight Line Rip Saw Diehl's Mid-Sized Rip Saw, an economically priced machine with the speed and performance of large saws, with guaranteed glue line accuracy. All this coupled with Diehl's legendary quality and durability. Arbor Motor: 15Hp (11.2 Kw), 20Hp (15 Kw) optional Feed Motor: 2Hp ...more
Siemens 6GK1901-1FC00-0AA0 NEW UNIT STOCK G635A
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Siemens
Model: 6GK1901-1FC00-0AA0
Siemens 6GK1901-1FC00-0AA0 NEW UNIT STOCK G635A.
Sealmaster bearing sfc-35c / sfc35c new open box stock cc107
GEI Surplus | Chalfont, PA
Category: Ball & Roller Bearings
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Sealmaster
Model: SFC-35C
902 HP Caterpillar #D3508B-DITA, diesel engine, 1200 RPM, electronic governor, 2001
LarMar Industries Inc. | Midland, TX
Category: Diesel Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: D3508B-DITA
Year: 2001
MANUFACTURER: Caterpillar MODEL: D3508B HP: 902.0 hp RPM: 1200 Serial No: CBB00139 Reference: UC1692 D3508B DITA, CATERPILLAR, 900hp @ 1200rpm; Land Mechanical; DOM 2001; electronic governor; SAE 00 flywheel housing; std drum air cleaner; CAT EMS II panel; Shutdown; alternator; CAT rails. Recent rebuild, estimated ...more
Lot of 3 - mcgill mr16n/ mr 16 n needle roller bearing stock h351a
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Mcgill
Model: MR16N
LOT OF 2 - MCGILL MR16N/ MR 16 N NEEDLE ROLLER BEARING STOCK H351A.
Mazak #QT-35XS CNC Lathe, 18.35" diameter x 40.75" L max, 25.9" swing, 4.5" bar, 5" Bore, 2500 RPM, 30/35 HP, 12 station, 16" Air Chuck, 220 V., 1998
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Mazak
Model: QT-35XS
Year: 1998
Make: Mazak, Model: QT-35XS, Year: 1998, Machine Location: Louisiana, Max Turning Diameter: 18.35″, Max Turning Length (Distance Between Centers): 40.75″, Swing Over Bed: 25.93″, Max Bar Capacity: 4.5″, X‑Axis Travel: 10.63″, Z‑Axis Travel: 40.55″, Rapid Traverse (X ...more
750 KW Caterpiller #D3508B, marine auxiliary generator, water cooled, 480 Volts (2 available)
Pan American Power | Covington, LA
Category: Diesel Generators
Seller: Pan American Power
Location: Covington, LA
Mfr: Caterpillar
Model: D3508B
Year: 2003
Caterpillar Model D3508B 750KW Marine Auxiliary Generator, Removed From US Navy Vessel, 750KW Kato Generator, 480VAC, water-cooled, (2) Unit available.
Sine #SPS-35, Positive Displacement Pump, 3 HP, 1760 RPM, 208-230/460 V, 154 RPM speed, (2) 3" Tri-clamp Inlet/Outlet
Genemco | Hearne, TX
Category: Positive Displacement Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Sine
Model: SPS-35
Sine Positive Displacement Pump. Model SPS035NNTCM. Serial: 208767035A472M. Gear drive ratio: 11.4 (154 final RPM). Baldor Washdown Duty Motor: 3 HP, 208-230/460V, 1760 RPM, 60 Hz, 3-phase, 182TC Frame. Control panel s AC Tech Lenze VFD 208/240V motor speed controller. Ports: 3 tri-clamp.
Caterpillar TH35-E81, Transmission, New
Diesel Sales | Chicago, IL
Category: Transmissions
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: TH35-E81
Surplus New Drop Box, Fits: C9, C11, C13, C15, And C18 Acert Engines, Never Used 2 Wheel Drive Transmission, Th35-E81 Oil Field Drop Box Transmission 2wd, Ar#321-1332 Sms00313 & 316, Ar#321-1332 $29995.00. Last Two In Stock. Stock #30243 Pricing May Vary Depending On The Application Or Sn#.
Summit #VS-350B, vertical mill, 10" x50" table, 3 HP, 60-4200 RPM, R-8, NEW
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Summit
Model: VS-350B
Motor Size 3 HP Number of Spindle Speeds Inf. Variable Speed Range (RPM) 60-4,200 Spindle Taper R-8 Spindle Traverse 5 inches Spindle Feed Range.0015/.003/.006 Head Movement Side to Side +/- 90 Head Movement Front to Back +/- 45 Table Size 10" x 50" x 3 1/8" Table Longitudinal Feed 36 inches Table Cross Feed 16 inches ...more
JUST ADDED!
Bobcat E35I, Crawler Excavator, 201 hours, S/N: B57916002, 2023
Warren Cat | Amarillo, TX
Category: Excavators
Seller: Warren Cat
Location: Tulsa, OK
Mfr: Bobcat
Model: E35I
Year: 2023
BOBCAT E35I MINI EXCAVATOR, EROPS QC THUMB BKT.
Arpac #PC3500, automatic, continous motion, 6-Axis, servo driven, wrap-around case packer, up to 35 cases per minute
Frain Industries | Carol Stream, IL
Category: Case Packer Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Arpac
Model: PC3500
Arpac, Model PC3500, Automatic, continous motion, 6-axis, servo driven, wrap-around case packer. Rated up to 35 caes per minute – depending materials, application and machines configuration. Product size range: 4¾" to 13½" Long x 7¼" to 20" Wide x 4" to ...more
Tafa #30-8B35, Thermal Arc Specialties spray power unit, w/ controls for spray air, wire feed, gun controls, AS IS
JE Holding CC LLC | Corpus Christi, TX
Category: Arc Welders
Seller: JE Holding CC LLC
Location: Corpus Christi, TX
Mfr: Arc Specialties
Model: 30-8B35
Thermal Arc Spray Power Unit, Mfd. By Tafa, Mdl. 30-8b35, Stock #903264-00-10454, SN. KG224786 W/Controls For Spray Air, Wire Feed, Gun Controls, Cream & Black, (functional needs part replacement), accessories for sale, LINCOLN WELDER power source.
350 HP Smith Hughes #RT-350A, RENTAL, 250 psig, 12075 pph, Natural Gas, #2 Fuel oil fired, low NOx, firetube steam boiler, trailer enclosed
Smith Hughes Co | Cincinnati, OH
Category: Firetube Boilers
Seller: Smith Hughes Co
Location: Cincinnati, OH
Mfr: Smith Hughes
Model: RT-350A
Year: 2023
RT-350A Mobile Boiler Room, 350 HP, 250 PSIG, Natural Gas, No. 2 Fuel Oil Fired, Complete boiler room package is designed to be placed in service at customer specified location with minimal, on-site work., INCLUDES:, • 40' Enclosed Container and Chassis, • (1) 350 HP Superior firetube steam boiler ...more
38.5 Ton, Amada #RG-35S, hydraulic press brake, 4' overall, 40.2" between housing, 3.94" stroke, 3-Axis, 1990
PM Machines | Santa Ana, CA
Category: Hydraulic Press Brakes
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Amada
Model: RG-35S
Year: 1990
1990 AMADA RG-35S, Tonnage. 38.5 T, Type. HYD, Overall Length. 49.3", Between Housings. 40.2", Stroke. 3.94", # Axis. 3, Dimensions. 71” x 61” x 79”, Weight. 3,500 lbs.
35 Ton, Denison Multipress #FC35-30HC99D01D88A31C334, C-frame press, 15" stroke, 24.7" daylight, 12" throat, 5" cylinder bore, 984
D & H Machinery Inc | Toledo, OH
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Denison
Model: FC35-30HC99D01D88A31C334
Denison Multipress Hydraulic Press, -Model: FC35-30HC99D01D88A31C334, -Capacity: 35 Ton, -Cylinder Bore: 5", -Ram Dia.: 3.5", -Stroke: 15", -Daylight: 24.75", -Throat: 12", -Bed Size: 29.625" L-R x 20" F-B, -33.5" from Floor to top of Bed, -Self-Contained Hydraulic Power Unit, 30 HP AC Motor, 1800 RPM, 230 V, 3,565 ...more
