Heat Treat Equipment Co
Canton, MI 48188
Gold Level Dealer
Surplus Record Dealer Since 2013
Contact
About
Heat Treat Equipment was established in 2011 by John Becker to serve as a broker in the sale of used furnaces and other heat treating equipment. We have the experience and the expertise to help you make the right decisions when it comes to updating and upgrading your equipment.Products & Services
- Blowers & Fans
- Air Compressors
- Conveyors
- Filters
- Furnaces & Ovens
- Generators
- Heat Exchangers
Associations & Affiliations
109 listings in 25 categories
Air Cooler Type Heat Exchangers
1 Result
Ecodyne MRM, oil-to-air heat exchanger, 2-fans, 6' diameter blades, 3" inlet, 2.5" outlet, 230/460 V.
Category: Air Cooler Type Heat Exchangers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Ecodyne Mrm
Manufacturer: Ecodyne MRM, Type: Quench Oil-to-Air Heat Exchanger, Size: 7W-16L-2F6.0, Serial Number: 12831, Heat Exchanged: 1,250,000 BTU/hr, Tube Side: Quench Oil Temp: In 150°F, Out 130°F, Air Side: Quench Oil Temp: In 95°F, Out 108.7°F, Overall Dim’s: 17’ long x 7’5” wide x ...more
Atmosphere Gas Generators and Accessories
10 Results
500 cu.ft., Nitrex, ammonia dissociator, Honeywell instruments, flow meter, 480 V.
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Nitrex
Manufacturer: Nitrex, Type: Ammonia Dissociator, Output: 500-800 cubic feet, Rated: 480 V, 3-Phase, 60 Cycle, Controls: Honeywell instruments, Flow meter.
1200 cu.ft./hr., Atmosphere Engineering, indo injector gas generator components
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Atmosphere Engineering
Manufacturer: Atmosphere Engineering, Type: Endo Injector, Serial Number: 0249-DPI, Capacity: 250-1200 CFH.
1200 cu.ft./hr., Surface Combustion #Endogas, Endothermic Gas Generator, 460V., 950°F, Honeywell controller, Ssi Injection System and Controls
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: Gas-Fired RX Generator, Serial Number: C-5169-1, Size: T-1-N, Capacity: 1200 CFH, Power: 460 Volts, 3-Phase, 60 Hz, Max Temp: 2050°F, Heating: Natural Gas, Controls: no instruments, Air cooled, Roots pump.
1500 cu.ft./hr., Atmosphere Engineering, Ammonia Dissociator, 480 V.,
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Atmosphere Engineering
Manufacturer: Atmosphere Engineering (now Nitrex), Type: Dissociated Ammonia Generator, Serial Number: GEN-2017-7428-10 (manufactured 2018), Capacity: 1500 CFH, Line Voltage: 480 VAC, Control Voltage: 120 VAC, 24 VDC, Main Fuse: 70 Amps, Full Load: 42 Amps, Operator Friendly Touchscreen Interface, High-Efficiency ...more
3000 cu.ft./hr., Surface Combustion, endothermic gas generator, 1000 BTU/CF, 1875°F
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: RX (Endothermic) Gas Generator, Serial Number: BC-40932-1 (1801-02), Size: S-2-EN, Capacity: 3,000 CFH (2 retorts), Max Temp: 1875°F, Fuel: 480 Volts, 3-Phase, 60 Hz, 45 KW, Controls: Digital Controller & Overtemp, Standard Surface design with dual retorts, Air-cooled.
3600 cu.ft./hr., Surface Combustion, retorts, endothermic (new) w/ flange, 75" OAL x 9" OD x 8" ID
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Type: Retort (for Surface 3600 CFH Endo Generator), Overall Length: 75” (with standard surface machined groove), Tube OD/ID: 9.0”/8.0”, Flange: 12” x 13.5” x.50” thick (8 threaded studs), Alloy: HT, Retort is new (never used).
4000 cu.ft./hr., Atmosphere Engineering, Exothermic Gas Generator, 480 V., 2017
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Atmosphere Engineering
Year: 2017
Manufacturer: Atmosphere Engineering (now Nitrex), Type: Exothermic Gas Generator, Serial Number: ECP-1227 (manufactured 2017), Footprint Dim’s: 83” x 100” (approximate), Capacity: 4000 CFH, Line Voltage: 480 VAC, Control Voltage: 120 VAC, 24 VDC, Full Load: 171 Amps, Hinged Shell, Low Skin ...more
6000 cu.ft./hr., JL Becker, Exothermic Gas Generator, 2600°F, 25 GPM Water, 460 V.
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jl Becker
Manufacturer: JL Becker Company, Model: Rich Exo Generator with Dryer, Capacity: 6,000 / 8,000 CFH, Serial Number: J2284, Max Temp: 2600°F, Fuel: Natural Gas – 2,250 CF per hour, Power: 460 Volts, 3-Phase, 60 Hz, 11 Amps, Water / Air: 25 GPM / 55 in. WC, Controls:, Honeywell Temperature Controls, Waukee flow ...more
6000 cu.ft./hr., Surface Combustion #V-1251, Endothermic Gas Generator
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: RX (Endothermic) Gas Generator, Serial Number: AC-44047 (HTS 1802-19), Model: RX-3T-ABF, Capacity: 9,000 CFH (3 retorts), Fuel: Natural Gas, 1000 BTU/CF, Power: 480 Volts, 3-Phase, 60 Hz, Temp. Range: 1950°F, Flow Meters: Waukee (endothermic & natural gas), Controls: ...more
10000 cu.ft./hr., Surface Combustion #RX-50-100-47, endothermic generator, NG, 1000 BTU/CF, 480 V., 3-phase, 1950°F, 4 Honeywell digital temperature ctrlrs
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: RX (Endothermic) Gas Generator, Serial Number: CC-12177-1, Model: RX-50-100-47, Capacity: 10,000 CFH (4 retorts), Fuel: Natural Gas, 1000 BTU/CF, Power: 480 Volts, 3-Phase, 60 Hz, Temp. Range: 1950°F, Flow Meter: Waukee (air/endo), Controls:, 4 Honeywell Digital Temperature ...more
Surface Combustion, SDA Washer, 5 HP Spray Pump, 300 CFH, 3 PSIG, 460 V., 180°F, Honeywell Temp Control
Category: Automated Batch Washers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Serial Number: BC-43527-01, Type: Washer – Spray/Dunk/Agitate; 5 HP spray pump, Heated: Natural Gas, 300 CFH, Fuel Pressure: 3 PSIG, Power: 460 Volts, 3-Phase, 60 Hz, 10 KW, Load Dim’s: 36” wide x 48” long x 36” high, Temperature: 160 - 180°F ...more
Batch Type Furnaces/Ovens
9 Results
16.5" width x 16" D x 19.75" H Blue M #206 size oven, electric batch oven, 482 F, 3 KW, 208 V.
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Blue M
Manufacturer: Blue M Equipment, Type: Electric Batch Oven, Model: 206 size oven, Serial-Number: 19X-506-92, Workable-Dim's: 16.5” wide x 16” deep x 19.75” high, Overall-Dim's: 36” wide x 36” deep x 72” high, Heated: Electric, Power: 3 KW, 208 Volts, 1-Phase, 60 Hz, Max Temp: ...more
24" width x 20" D x 20" H Blue M #CW-170HMP1, electric batch oven, 1300 F, side swinging door
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Blue M
Manufacturer: Blue M Equipment, Type: Electric Batch Oven, Model: CW-170HMP1, Serial-Number: C7-911, Working-Dim's: 24” wide x 20” deep x 20” high, Overall-Dim's: 72” wide x 36” deep x 70” high, Heated: Electric, Rating: 25 Amps, Power: 550 Volts, 3-Phase, 60 Hz, Control: ...more
24" width x 36" D x 18" H Wisconsin #SDB-436-12G, batch temper, gas fired furnace, 1250°F
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Wisconsin
Manufacturer: Wisconsin Oven, Type: Batch Temper, Gas-Fired Furnace, Model: SDB-436-12G, Serial: 030059103, Max Temp: 1250°F, Workable Dim’s: 24” wide x 36” deep x 18” high, Overall Dim’s: 71” wide x 75” deep x 104” high, Rated: 480 V / 3-Phase / 60 Cycle, Heated: ...more
30" width x 30" D x 30" H Lindberg #LTE-6, electric batch oven, 600°F, 22 Amp, 230 V., Honeywell temperature controller
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Lindberg
Manufacturer: Lindberg, Type: Electric Batch Oven, Model: LTE-6, Serial Number: 18457, Working Dim’s: 30” wide x 30” deep x 30” high, Max Temp: 600°F, Heated: Electric, Power: 230 Volts, 3-Phase, 6 KW, Controls:, Honeywell temperature controller, Honeywell hi-limit controller, Honeywell ...more
36" width x 36" D x 36" H Precision Quincy #x2-3-36x36x36, batch oven, 230 V., 1-phase, 46 Amps., 350°F, Honeywell digital temp. controller, 2010
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Precision
Year: 2010
Manufacturer: Precision Quincy, Type: Electric Batch Oven, Serial Number: 19630 (built 2010), Model: X2-3 36x36x36, Working Dim’s: 36” wide x 36” deep x 36” high, Overall Dim’s: 45” wide x 95” deep x 73” high, Weight: 1250 pounds, Power: 230 Volts, 1-Phase, 60 Hz, 46 ...more
36" width x 36" D x 36" H Precision Quincy, gas fired batch oven, Nat gas, 500 F, 100,000 BTUH
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Precision Quincy
Manufacturer: Precision Quincy, Type: Gas-Fired Batch Oven, Workable-Dim's: 36” wide x 36” deep x 36” high, Overall-Dim's: 69” wide x 53” deep x 73” high, Heated: Natural Gas, Rating: 100,000 BTUH, Power: 480 Volts, 3-Phase, 60 Hz, 7.5 Amps, Max-Temp: 500°F, Controls: ...more
48" width x 30" D x 48" H Precision Quincy #40B-350, electric batch oven, 350°F, 22 Amp, Honeywell temperature controller
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Precision Quincy
Manufacturer: Precision Quincy Corp., Type: Electric Batch Oven, Model: 40B-350, Serial Number: 10046, Working Dim’s: 48” wide x 30” deep x 48” high, Overall Dim’s: 75” wide x 37” deep, Max Temp: 350°F, Heated: Electric, Power: 480 Volts / 3-Phase / 60 Hz, 22 Amps ...more
48" width x 72" D x 10" H Targa Thermal Solutions, high temp electric batch oven, 850°F, 120 V., 1-phase
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Targa
Manufacturer: Targa Thermal Solutions, Type: Electric Batch Oven – High Temp, Working Dim’s: 48” wide x 72” deep x 10” high, Working Dim’s: 82” wide x 104” deep x 100” high, Max Operating Temp: 850°F, Operating Temp: 650°F, Temp Uniformity: ...more
60" width x 120" D x 60" H Wisconsin Oven, gas-firedbatch oven, 1400°F, Honeywell temp controller, Honeywell round chart recorder
Category: Batch Type Furnaces/Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Wisconsin
Manufacturer: Wisconsin Oven, Type: Gas-Fired Batch Oven, Model: BATCH-5/10/5-G14, Serial Number: 02714A1101, Working Dim’s: 60” wide x 120” deep x 60” high, Max Temp: 1400°F, Heated: Gas-fired, 1,500,000 BTU, Power: 480 Volts / 3-Phase / 60 Hz, 36 FLA, Controls: Honeywell Temperature ...more
24" width x 24" H x 96" D Unitherm #EB242496, elect box furnace, 1600°F, 480 V., 3-phase, Allen-Bradley PanelView Plus 1000
Category: Box Type Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer: Unitherm Furnace Corp., Type: Electric Box Furnace, Serial Number: 122711, Model Number: EB242496, Workable Dim’s: 24” wide x 96” deep x 24” high, Rating: 480 Volts, 3-Phase, 60 Hz, 75 KW, Maximum Temp: 1600°F, Controls: Allen-Bradley PanelView Plus 1000.
24" width x 36" H x 24" D Despatch #RS-0, Box Furance, 500°F, Partlow Temp Control
Category: Box Type Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Despatch
Manufacturer: Despatch Oven Co., Type: Electric Batch/Box Oven, Serial / Model Number: 77353 / RS-0, Working Dim’s: 24” wide x 24” deep x 36” high, Overall Dim’s: 36” wide x 36” deep x 108” high, Power: 220 Volts / 3-Phase / 60 Hz, Heated: Electric, 8 KW, High Temp: ...more
Brazing and Sintering Furnaces
2 Results
26" width x 84" H x 54' L JL Becker, mesh belt brazing furnace, 2100°F, elect, Allen Bradley SLC PLC, 2007
Category: Brazing and Sintering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Year: 2007
Please note: This furnace is new. It has been started up and tested. It was never put into service., Manufacturer: JL Becker Company, Type: Electrically Heated Mesh Belt Brazing Furnace, Serial: J3454 (built 2007), Max Temp: 2100°F, Dimensions:, Load Table: 3’-0” long (from exit of flame curtain door ...more
Seco-Warwick #MBC-18812, mesh belt brazing furnace, 18" belt, 2100 F, 2 zone
Category: Brazing and Sintering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Seco
Manufacturer: Seco-Warwick, Type: Mesh Belt Brazing Furnace, Model Number: MBC-18812, Serial Number: 158966, Max-Temp: 2100°F, Furnace Dim's (approx.):, (1) Load Table: 4’ long, (2) Preheat Section: 4’ long, (3) Heating Section: 10’ long, (4) Slow Cool Section: 2’ long, (5) Water ...more
Burn Off and Paint Stripping Ovens
1 Result
53" width x 64" H x 47" D Guspro #G04B4040, gas-fired batch burnoff oven w/ cart, 650°F, 1250000 BTU/hr
Category: Burn Off and Paint Stripping Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Guspro
Manufacturer: Guspro Inc., Type: Gas-Fired Batch Oven with Cart, Model Number: G04B4040, Working Dim’s: 53” wide x 47” deep x 64” high, Overall Dim’s: 71” wide x 102” deep x 79” high, Cart Dim’s: 37” wide x 48” deep x 41” high, Weight: 4,500 ...more
18" width x 15" H x 18" D Despatch #LBB1-23A-1, Cabinet Oven, 400°F, 120 V.
Category: Cabinet Type Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Despatch
Model: LBB1-23A-1
Manufacturer: Despatch, Type: Bench Top Oven, Serial Number: 181815, Model: LBB1-23A-1, Working Dim’s: 18” wide x 18” deep x 18” high, Power: 120 Volts / 1-Phase / 60 Hz, 12 Amps, Heater: 1200 Watts, 10.0 Amps, Moter: 1/25 HP, 1.6 Amps, Controls:, Oven mounter control panel, Temperature & ...more
35" width x 24" H x 18" D Despatch #VRE2-10-2G, cabinet style temper furnace, 850°F, 50000 BTU, Honeywell temp controller
Category: Cabinet Type Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Despatch
Model: VRE2-10-2G
Manufacturer: Despatch, Type: Cabinet Style Temper Furnace – V Series, Serial / Model No.: 145405-L / VRE2-10-2G, Power Required: 240Volt / 3 Phase / 60 Hz, 4.8 Amps, Max Temp / Capacity: 850°F / 50,000 BTU, Load Dim’s: 35" Wide x 18” Deep x 24" High, Overall Dim’s: 96" Wide x 42” ...more
36" width x 36" H x 21" L Grieve #323, Cabinet Oven, 400°F
Category: Cabinet Type Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Grieve
Model: 323
Manufacturer: Grieve Oven, Type: Electric Cabinet Oven, Serial No./Model: 313420 / 323, Max Temperature: 400°F, Power: 4.4 KW, Air Flow: Forced Convection, Front to Back, Workable Dim’s: 36” wide x 21” deep x 36” high, Rated:230 V, 3-Phase, 60 Cycle, 23 Amps, Overall Size: 40” wide x ...more
36" width x 36" H x 36" L Grieve #333, Cabinet Oven, 400°F
Category: Cabinet Type Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Grieve
Model: 333
Manufacturer: Grieve Oven, Type: Electric Cabinet Oven, Serial No./Model: 313326 / 333, Max Temperature: 400°F, Power: 6.6 KW, Air Flow: Forced Convection, Front to Back, Workable Dim’s: 36” wide x 36” deep x 36” high, Rated: 230 V, Single Phase, 60 Cycle, 33 Amps, Overall Size: 40” ...more
4' width x 6' D x 3.75' H, IHEI #CO-48-72-48, Direct-Fired Car Bottom Furnace, 480 V., Honeywell Controls
Category: Car Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Ihei
Manufacturer: IHEI, Type: Direct-Fired Car Bottom Furnace, Model Number: CO 48 72 48, Cart Dimensions: 48" wide x 72" deep, Interior Dimensions: 112" wide x 112" deep x 142" high, Fuel/Max Temp: Natural gas / 1000°F, Eclipse package burners, 1,000,000 BTU’s, Power: 480 Volts, 3-Phase, 60 Hz, Interior ...more
5' width x 6' L x 6' D Gas-Fired Car Bottom Furnace, 650°F, 480 V., 3-phase, Allen Bradley Powerview 550 controller, Barber Coleman 560A controller
Category: Car Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer: Unknown, Type: Gas-Fired Car Bottom Furnace, Working Dim’s: 60” wide x 72” deep x 72” high, Max Temp: 650°F, Heated: Gas-fired, Power: 480 Volts / 3-Phase / 60 Hz, Controls:, Allen Bradley Powerview 550 Controller, Barber Coleman 560A Controller.
8.5' width x 17' D x 4' H, Coreco #9617, Car Bottom Furnace, 480 V., 1700°F, Honeywell Controls, Pyronics Flame Monitoring System
Category: Car Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Coreco
Manufacturer: Coreco, Type: Direct-Fired Car Bottom Furnace, Model Number: 9617, Load Dimensions: 102" wide x 204" deep x 48" high, Fuel/Max Temp: Natural gas / 1700°F, Power: 480 Volts, 3-Phase, 60 Hz, Burners: Eight Eclipse Model 82 MVTA burners, Controls:, Free standing control panel, Honeywell Temperature ...more
9' width x 16' L x 7' H, Tilt-Up car bottom furnace, Natural gas, 3600000 BTU' s, 1600°F, 2005
Category: Car Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Year: 2005
Type: Tilt-Up Car Bottom Furnace, Manufactured: Built in 2005 & installed in 2006, Max Fuel Demand:, Natural Gas – 3,600,000 BTU’s, 12 radiant tubes, Kromschrder burners, Max Temp: 1600°F, Max Load: 25,000 pounds, Power: 480V, 3-Phase, 60 Hz, Working Dim’s: 9’ wide x 16’ deep x ...more
10' width x 18' D x 5' H Williams Industrial, car bottom furnace, 1450°F, gas, Eurotherm 2604 temperature Control, Honeywell DR4311 recorder, 2004
Category: Car Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams Industrial
Year: 2004
Manufacturer: Williams International, Type: Car Bottom Furnace, Serial Number: 02617, built 2004, Heating: Natural gas – 3000 CFH – radiant tubes, Max Temp: 1450°F, Workable Dim’s: 80” wide x 192” long x 60” high, External Dim’s: 13.75’ wide x 24.75’ long x ...more
48" width x 5" H x 120" L Infatrol, continuous flat wire belt furnace, 480 V., 400°F, 400000 BTU, Future Design Controls FDC8100 controller, Autronics TC400 Over-Temp Controller
Category: Conveyor Belt Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Infatrol
Manufacturer: Infratrol Manufacturing, Type: Continuous Flat Wire Belt Furnace, Serial Number: 0V7428S1C01L06, Heating: Natural Gas, 400,000 BTU, Working Dim’s: 48” wide x 5” clear height x 10’ of heating, Note: Clear height can be increased., Overall Dim’s: 9’8” wide x ...more
7 Ton, Dalkin #DCG0902104BWXXAC, air furnace w/ cooling unit, 440 psig, 170°F
Category: Cooling Towers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Model: DCG0902104BWXXAC
Manufacturer: Dalkin, Type: Forced Air Furnace with Cooling Unit, Model: DCG0902104BWXXAC, Serial Number: 1708095736, Cooling Cap: 7.5 Tons, Heating Cap: Gas/Electric 210,000 BTU/HR, Voltage: 460V / 3 Phase / 60 Hz, Drive Motor: Belt Drive (single speed), Overall Size: 172” wide x 44” tall x 45” ...more
15 Ton, Marley #4812, AquaTower cooling tower, A75 belt length, 24" fan, 1 HP
Category: Cooling Towers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Marley
Model: 4812
Manufacturer: Marley Cooling Tower Co., Serial Number: 139866 – 1/A92520A/4812, Series: 4812 Aquatower®, Capacity: 15 Ton, Belt Length: A75, Cooling Fan: 24” fan, 1.0 HP, Power Required: 460 Volt, 3-Phase, 60 Hz, Overall Dim’s: 36” wide x 36” long x 62” high.
15 Ton, Marley #4812, AquaTower cooling tower, A75 belt length, 24" fan, 1 HP
Category: Cooling Towers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Marley
Model: 4812
Manufacturer: Marley Cooling Tower Co., Serial Number: 56429 – 1/A92520A/4812, Series: 4812 Aquatower®, Capacity: 15 Ton, Belt Length: A75, Cooling Fan: 24” fan, 1.0 HP, Power Required: 460 Volt, 3-Phase, 60 Hz, Overall Dim’s: 36” wide x 36” long x 62” high.
48" width x 48" H x 72" D Michigan, Drop Bottom Furnace, 1200°F, 10000 CFM, 100 lb., 460 V., Allen Bradley SLC, Honewell Chart Recorder, 2005
Category: Drop Bottom Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Michigan
Year: 2005
Manufacturer: Michigan Oven, Type: Electric Aluminum Drop Bottom Furnace, Class One: Aerospace, ±5° with a seven second or less quench time., Capacity: 1000 pounds, Work Dimensions: 48" wide x 72" deep x 48" high, Heated: Electric, 460V / 3-phase / 60 Hz at 150 KW, Controls:, Prewired free standing NEMA12 ...more
Dryers and Coolers
1 Result
MRM, Batch Oil Cooler, 480 V., 3-phase, 60 Hz
Category: Dryers and Coolers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Mrm
Manufacturer: MRM, Type: Batch Oil Cooler, Power: 480V / 3-phase / 60 Hz, One (1) fan.
Integral Quench Furnaces
8 Results
24" width x 21" D x 24" H Ideal, AL quench furnace, 1000°F, Honeywell temperature controller
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Ideal
Manufacturer: Ideal, Type: Aluminum Solution Furnace with Quench, Serial: 17496A, Working Dim’s: 24” wide x 22” high x 27” long, Power: 70 KVA, 460V / 3-Phase / 60Hz, 198 KW, Max Temp: 1000°F, Skid hearth, Controls: Honeywell Temperature Controller, Honeywell Over-Temp Controller, Graphtec ...more
24" width x 36" D x 18" H Pacific Industrial Furnace #PKM75, straight thru IQ furnace, 1750°F
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Pacific
Manufacturer: Pacific Industrial Furnace, Type: Straight Through Integral Quench Furnace, Model-Number: PKM75, Load-Dimensions: 24” wide x 36” deep x 18” high, Overall-Dimensions: 72” wide x 24’ deep x 10’ high, Max-Temperature: 1750°F, Heating:, Gas-fired (8) Eclipse vertical ...more
24" width x 36" D x 36" H Surface Combustion, Internal Quench Furnace, 480V., 1850°F, Ssi Digital Controller, SLC PLC
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: Batch Internal Quench Furnace, Model: Super 24-36-24 Allcase System, Serial Number: BC-44110 / SX-12118, Working Dim’s: 24” wide x 36” deep x 24” high, Power: 480 Volts / 3-Phase / 60 Hz, Max Temp: 1850°F, Heating: Natural Gas; trident tube design ...more
30" width x 48" D x 30" H Surface Combustion, IQ furnace, Natural gas, 1000000 BTU/hr, 1850°F
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacture: Surface Combustion, Type: Integral Quench Furnace, Fuel: Natural Gas – 1,000,000 BTU/hour, Max-Temp: 1850°F, Power: 480 V, 3-phase, 60 Hz, Working-Dimensions: 30” wide x 48” deep x 30” high, Quench-Tank-Volume: 3,000 gallons, Flow-Meters: Waukee process controls, (5) air ...more
36" width x 48" D x 36" H AFC, I/Q Furnace w/ Top Cool, 1800°F, 480V., 1200000 BTU, 3500 gallon capacity, Allen Bradley PLC
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Afc
Manufacture: AFC, Type: IQ Furnace with Top Cool, Serial Number: 61570, Max Fuel Demand: Natural Gas – 1,200,000 BTU’s, Hawk burners and recuperators, Max Temp: 1800°F, Max Load: 3,500 pounds, Power: 480V, 3-Phase, 60 Hz, 70 Amps, Working Dim’s: 36” wide x 48” deep x 36” high ...more
36" width x 72" D x 36" H Surface Combustion, Super 36 72 36 Allcase IQ Furnace, 1750°F, 1986
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Year: 1986
Manufacture: Surface Combustion, Type: Super 36-72-36 Allcase IQ Furnace with top cool, Top-Cool: Yes, with Endo gas, Working Dimensions: 36” wide x 72” deep x 36” high, Overall Dim’s: 11’3” wide x 13’9” deep x 11’5” high, Quench & Vestibule: ...more
36" width x 72" D x 36" H Surface Combustion #36-72-36, 1100000 BTU/hr., 1850°F, 460V.
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacture: Surface Combustion, Type: Integral Quench Furnace, Working Dim’s: 36” wide x 72” deep x 36” high, Max Fuel Demand:, Natural Gas – 1,100,000 BTU/hour, 4 U-tubes, Eclipse burners, Two (2) probes, Two (2) SSi reference air/BO air boxes, Max Temp: 1850°F, Power: 460 V ...more
36" width x 72" D x 36" H Surface Combustion, IQ Furnace w/ top cool, 1800°F, gas, (2) 12" pneumatic air cylinders
Category: Integral Quench Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacture: Surface Combustion, Type: IQ Furnace with top cool, Top cools have two (2) 12” pneumatic air cylinders, Serial Number: BC-42576-2, Working Dim’s: 36” wide x 72” deep x 36” high, Heating: Natural Gas, Burners: Standard tube design (updated recuperative burner system), Fuel ...more
Lab Freezers
2 Results
300 Below 300° Below #701, cryogenic processor, 67" W x 23' D x 31' D inside dim., -300°F, 480 V.
Category: Lab Freezers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: 300 Below
Model: 701
Manufacturer: 300° Below Inc., Type: Cryogenic Processor, Model Number: 701, Serial Number: 701-017, Max Temperature: -300°F, Inside Dimensions: 67” wide x 23” deep x 31” deep, Power: 480V / 3-phase / 60 hertz.
Cryotron Corp. #EC-65, 46" W x 44" D x 598" H, cryotron processor, -350°F to 400°F, Allen Bradley PLC
Category: Lab Freezers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Cryotron Corp
Model: EC-65
Manufacturer: Cryotron Corp., Type: Cryogenic Processor, Model: EC-65, Serial Number: 11-08-06, Working Dim’s: 46” wide x 44” deep x 59” high, Temp. Range: -320°F to 400°F, Supply: 480 VAC / 1-Phase / 60 Hz, 39 max amps, Elements: 1-3: 480 VAC / 1-Phase / 60 Hz, 5000 Watts each, Motor: ...more
Miscellaneous Furnaces, Ovens and Parts
11 Results
Charge Car, 36" W x 48" L Abar Ipsen, 460V.
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
Model: CHARGE CAR
Load Dimensions: …… 36” wide x 48” long, Power:, 460V, 3-Phase, 60 Hz, 4.75 Amps Max Cont. Current, 2.3 KW Max Cont. Input.
Charge Car, Ipsen #DEDP, 24" W x 36" L, S/N R486302
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Ipsen
Model: CHARGE CAR
Manufacturer: Ipsen Inc., Type: Charge Car DEDP, Serial Number: R486302, Power: 460 V, 3-phase, 60 Hz, Size: 24” wide x 36” long, Operator Station.
Charge Car, Surface Combustion, 24" W x 36" D
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Model: CHARGE CAR
Manufacturer: Surface Combustion, Type: Charge Car DEDP, Serial Number: BC-43385, Power: 460 V, 3-phase, 60 Hz, Size: 30” wide x 48” long, Operator Station.
Charge Car, Williams Ind Service #DEDP, 36" W x 48" D
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams
Model: CHARGE CAR
Manufacturer: Williams Industrial, Type: Charge Car DEDP, Serial Number: 02869, Power: 460 V, 3-phase, 60 Hz, Size: 36” wide x 48” long, Operator Station.
Charge Car - Double Ended, Surface Combustion, 36" wide x 72" long load dim.
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Model: CHARGE CAR-DOUBLE ENDED
Manufacturer: Surface Combustion, Type: Charge Car – Double Ended, Serial-Number: BC-42473-1, Power: 480V, 3-Phase, 60 Hz, Load-Dimensions: 36” wide x 72” long.
Charge Car Double Ended, 36" W x 72" L Surface Combustion, Extended Reach, 460V.
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Model: CHARGE CAR DOUBLE ENDED
Manufacturer: Surface Combustion, Type: Charge Car – Double Ended / Extended Reach, Serial Number: BC-44473-1, Power: 460V, 3-Phase, 60 Hz, Load Dimensions: 36” wide x 72” long.
Charger Car, Surface Combustion #DEDPER, 36" W x 48" D, 460 V., 3-phase
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Model: CHARGER CAR
Manufacturer: Surface Combustion, Type: Charge Car - Double-Ended / Double-Position / Extended Reach, Serial Number: BC-44743, Power: 460 V, 3-phase, 60 Hz, Size: 36” wide x 48” long, Operator Station.
Furnace Cooling System, Dry Coolers #CDX-200-240-EDP-ST, 277/480Y V., 50 GPM, 22 psi, 2018
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Dry Coolers
Model: FURNACE COOLING SYSTEM
Year: 2018
Manufacturer: Dry Coolers, Type: Furnace Cooling System, Model: CDX-200-240-EDP-ST, MW-18C, Serial Number: J-6889 (manufactured 5/8/2018), Power: 480Y / 277V / 3Ø / 60Hz, 5kA, Total FLA: 16.1 A, Largest Motor: 7.6 A, Enclosure: NEMA Type 4, Design Flow: 50 GPM, Pressure: 22 PSI.
Furnace U tubes, 74" total length, 9" center, 6.25" tube ID
Seller: Heat Treat Equipment Co
Location: Canton, MI
Model: FURNACE U TUBES
Type: Furnace U-Tubes, Total Length: 74”, Center/Center: 9”, Tube ID: 6.25”.
Heating Elements, L2R, Sillicone Carbide, 65" L x 1.25 Diameter, (6 available)
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: I2r
Model: HEATING ELEMENTS
Manufacture: I²R Element Co., Type: Silicone Carbide Heating Elements, Quantity: Six (6) available, RR-65 x 34 x 1.25, Effective Heating: 34”, Overall Length: 65”, Tube Diameter: 1.25”.
Heating Elements, Byonet-Style, 1850°F, 57" L x 5.75" Diameter, (8 available)
Seller: Heat Treat Equipment Co
Location: Canton, MI
Model: HEATING ELEMENTS
Manufacture: Unknown, made for Lindberg IQ Furnace 24-36-24, Type: Bayonet Heating Elements, Quantity: Eight (8) available, Max Temp: 1850°F, Estimated KW: 8-10 KW, Overall Length: 57”, Heating Length: 39”, Insulator: 5.75” diameter, Alloy Tubes: Cast High Temperature Alloy, Tube Length: ...more
48" width x 72" D x 48" H, Lindberg, NG roller hearth furnace, 1350°F, 480 V., 3-phase, Honeywell controller
Category: Roller Hearth Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Lindberg
Manufacturer: Lindberg, Type: Roller Hearth Furnace, Workable Dim’s: 48” wide x 72” deep x 48” high, Rating: 480 Volts, 3-Phase, 60 Hz, Maximum Temp: 1350°F, Heating: Natural gas, Door: Pneumatically operated with controls, Insulation: Folded ceramic fiber modules, Hearth: Tubular ...more
72" width x 396" L x 24" H Surface Combustion #1706-04, roller hearth furnace, 1000°F
Category: Roller Hearth Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Category: Roller Hearth Furnace, Type: Gas-Fired Radiant Tube Atmosphere, Model Number: 1706-04, Heating: Natural Gas, Power:460 V / 3-Phase / 60Hz, Working Dim’s: 72” wide x 24” high x 33’ heated length, Maximum Temp: 1000°F, Controls:, Free-standing ...more
48" wide x 20' long, Roller conveyor, 16 galvanized 1.9" dia rolls, 1 HP, 225 lb linear ft
Category: Roller Type Conveyors
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Roller
Type: Roller Conveyor, Rollers: 16 galvanized, 1.9" diameter rollers, Motor: 1.0 HP, Belt-Width: 48” wide, Conveyor-Length: 20 fee t (2-10' sections), Capacity: 225 pounds per lineal foot.
Roots Dresser #32-Urai-Gas-L, Rotary Lobe Blower
Category: Rotary-Positive Blowers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Roots
Model: 32-URAI-GAS-L
Manufacturer: Roots Howden, Type: Rotary Lobe Blower, Serial Number: 17G5AG6878, Model: 32 URAI Gas L, Part Number: 719428SL.
Roots Dresser #33-U-Rai-Gas, Rotary Lobe Blower
Category: Rotary-Positive Blowers
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Roots
Model: 33-U-RAI-GAS
Manufacturer: Roots Dresser, Type: Rotary Lobe Blower, Serial Number: 1110940534, Model: 33 U-Rai Gas, Part Number: 651050 GL.
6" width x 2.5" H x 48" D JN Machinery #MKP-6, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1448 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
6" width x 2.5" H x 48" D JN Machinery #MKP-6, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1443 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
6" width x 2.5" H x 48" D JN Machinery #MKP-6, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1141 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
6" width x 2.5" H x 48" D JN Machinery #MKP-6, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1447 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
6" width x 2.5" H x 48" D JN Machinery, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1628 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
6" width x 2.5" H x 48" D JN Machinery, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1140 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
6" width x 2.5" H x 48" D JN Machinery, continuous temper furnace, 930°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jn Machinery
Manufacturer: JN Machinery Corp., Type: Electric Conveyor Belt Furnace on Scissors Lift, Serial No./Model: 1266 / MKP-6, Working Dim’s: 6” wide x 48” long (heated) x 2.5” high, Overall Dim’s: 15” wide x 68” long x 16-40” high (adjustable), Power: 120/240/480 V / 3-Phase ...more
16" diameter x 22" D Lindberg #9514-B-16-10, Pit-Style Tempering Furnace, 1250°F, 220V.
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Lindberg
Manufacture: Leeds & Northrup, Type: Pit-Style Tempering Furnace, Serial Number: 1663123, Max Temp: 1250°F, Power: 220V, 3-Phase, 60 Hz, 24KW, Working Dim’s: 16” ID x 22” deep, Outside Dim’s: 50” OD x 82” high, Fan located on bottom, Six (6) stack-able baskets included ...more
24" width x 24" H x 36" L Lindberg #13-ECF-243624-12, electric batch temper furnace, 1250°F, 460 V., Honeywell temperature controller
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Lindberg
Manufacturer: Lindberg, Type: Electric Batch Temper, Serial Number: 23899 (13-ECF-243624-12), Workable Dim’s: 24” wide x 36” deep x 24” high, Rating: 460 Volts, 3-Phase, 60 Hz, 45 KW, Maximum Temp: 1250°F, Door: Vertical Pneumatic, Controls:, Honeywell High Temperature Controller, Honeywell ...more
24" width x 24" H x 36" D Surface Combustion, Uni-Draw Temper Furnace, 480V., 1400°F, Honeywell Controls
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: Uni-Draw Batch Temper Furnace, Serial Number: BC-44111-01, Working Dim’s: 24” wide x 36” deep x 24” high, Electrics: 480 Volts, 3-Phase, 60 Hz, Fuel: Natural Gas, Max Temp: 1400°F, Max Fuel Demand: 390 SCFH, Fuel BTU/Unit: 1000/SCP, Fan: ABB Garden ...more
24" width x 36" D x 24" H Lindberg #93-243624-G14, gas fired temper furnace, 1400°F, 400000 BTU/HR, vertical rising pneumatic door
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Lindberg
Manufacturer: Lindberg, Type: Gas-Fired Temper Furnace, Serial #: 959574 (built 1995), Type: 93-243624-G14, Working Dim’s: 24” wide x 36” deep x 24” high, Max Temp: 1400°F, Heated: Gas-Fired, 400,000 BTU/HR, Power: 480 Volts, 3-Phase, 60 HZ, Vertical rising pneumatic door, Controls: Free ...more
30" width x 30" H x 48" D Surface Combustion Combustion Electric Temper Oven, 1250°F, SCR Controls
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: Electric Temper Furnace, Serial Number: BC-39795-1, Max Temperature: 1250°F, Workable Dim’s: 30” wide x 48” deep x 30” high, Overall Dim’s: 74” wide x 119” deep x 124” high, Rated:230 V, 3-Phase, 60 Cycle, 40 Amp, Min Power ...more
30" width x 30" H x 48" D Williams Industrial, gas-fired temper furnace, 1450°F, 800 CFH, Honeywell cstrls
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams
Manufacturer: Williams Industrial Service, Type: Gas-Fired Temper Furnace, Serial Number: 02222, Max Temperature: 1250°F, Max Fuel Demand: 800 CFH, Burners: Eclipse 84MVTA, Workable Dim’s: 30” wide x 48” deep x 30” high, Rated:480 V, 3-Phase, 60 Cycle, 30 Amp, Controls: Honeywell, HH Alloy.
30" width x 48" D x 24" H Temper Furnace, 1200°F, 480 V., 3-phase, pneumatically operated with controls, Honeywell Control
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer Sunbeam, Type: Gas-Heated Temper Furnace, Workable Dim’s: 30” wide x 48” deep x 30” high, Hearth: 6-power chain drive rollers on 6” C-C, Performance motor reducer, Drive motor ¾ HP, Load Height: 42”, Rating: 480 Volts, 3-Phase, 60 Hz, Maximum Temp: 1200°F ...more
36" width x 30" H x 48" D Despatch #WB-25, Electric Temper Furnace, 480V., 1350°F, Honeywell Controls, Loader Included
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Despatch
Manufacturer: Despatch Industries, Type: Batch Temper Furnace, Serial Number: 82667, Model: WB-25, Working Dimensions: 36” wide x 48” deep x 30” high, Power: 480 Volts / 3-Phase / 60 Hz, Heater: 51 KW, Max Temp: 1350°F, Controls: Honeywell Digital Controls, Loader included.
36" width x 30" H x 54" D Surface Combustion Electric Temper Oven, 1250°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: Electric Temper Furnace, Serial Number: BC-41060-1, Max Temperature: 1250°F, Workable Dim’s: 36” wide x 54” deep x 30” high, Rated:460 V, 3-Phase, 60 Cycle, 40 Amp, Max Heating Req’d: 75 KW, Shipping Weight: 9700 pounds.
36" width x 36" H x 48" D AFC #36-48-36, gas fired temper furnace, 1400°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Afc
Manufacturer: Atmosphere Furnace Company, Type: Gas-Fired Temper Furnace, Serial Number: 61434, Workable Dim’s: 36” wide x 48” deep x 36” high, Max Temp: 1400°F, Fuel: Gas-fired, 000 BTU, Rated: 480 V, 3-Phase, 60 Hz, 30 Amps.
36" width x 36" H x 48" D AFC #36-48-36, gas fired batch-temper furnace, 1250°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Afc
Manufacturer: Atmosphere Furnace Company, Type: Gas-Fired Temper Furnace, Serial Number: 61426, Workable Dim’s: 36” wide x 48” deep x 36” high, Max Temp: 1250°F, Fuel: Gas-fired, Rated:480 V, 3-Phase, 60 Hz, 30 Amps.
36" width x 36" H x 48" D AFC Holcroft #36-48-36, temper furnace, 1400°F
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Holcroft
Manufacturer: Atmosphere Furnace Company, Type: Gas-Fired Temper Furnace, Serial Number: 61433, Workable Dim’s: 36” wide x 48” deep x 36” high, Max Temp: 1250°F, Fuel: Gas-fired, Rated:480 V, 3-Phase, 60 Hz, 30 Amps.
36" width x 36" H x 72" D Sunbeam, electric temper furnace, 1150°F, vertical rising pneumatic door, free standing control panel
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Sunbeam
Manufacturer: Sunbeam, Type: Electric Temper Furnace, Working Dim’s: 36” wide x 72” deep x 36” high, Max Temp: 1150°F, Heated: Electric, Power: 480 Volts, 3-Phase, 60 HZ, Vertical rising pneumatic door, Controls: Free standing control panel with controls.
36" width x 36" H x 72" D Surface Combustion, batch temper furnace, 1450°F, Honeywell digital controller
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: Batch Temper Furnace, Serial Number: BX-37831-1D, Workable Dim’s: 36” wide x 72” deep x 36” high, Rating: 480 Volts, 3-Phase, 60 Hz, Maximum Temp: 1450°F, Heating: Natural gas, Door: Pneumatically operated with controls, Controls:, Attached control ...more
36" width x 36" H x 72" D Williams, gas fired temper furnace, 1400°F, Honeywell temp Control
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams
Manufacturer: Williams Industrial Service, Type: Gas-Fired Roller Rail Draw Furnace, Serial Number: 02391, Working Dim’s: 36” wide x 72” deep x 36” high, Overall Dim’s: 82” wide x 153” deep x 93” high, Load Height: 49.5” from floor line, Max Temp: 1400°F ...more
36" width x 36" H x 72" D Williams, gas fired roller-rail draw temper furnace, 1250°F, Honeywell temp Control
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams
Manufacturer: Williams Industrial Service, Type: Gas-Fired Roller Rail Draw Furnace, Serial Number: 02355, Working Dim’s: 36” wide x 72” deep x 36” high, Overall Dim’s: 82” wide x 153” deep x 93” high, Load Height: 49.5” from floor line, Max Temp: 1250°F ...more
36" width x 36" H x 72" D Williams, gas-fired temper furnace, 1250°F, Honeywell temperature controller
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams
Manufacturer: Williams Industrial Service, Type: Gas-Fired Roller Rail Draw Furnace, Serial Number: 02353, Working Dim’s: 36” wide x 72” deep x 36” high, Overall Dim’s: 82” wide x 153” deep x 93” high, Load Height: 49.5” from floor line, Max Temp: 1250°F ...more
36" width x 36" H x 72" D Williams, gas fired temper furnace, 1400°F, Honeywell overtemp controller
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Williams
Manufacturer: Williams Industrial Service, Type: Gas-Fired Roller Rail Draw Furnace, Serial Number: 02393, Working Dim’s: 36” wide x 72” deep x 36” high, Overall Dim’s: 82” wide x 153” deep x 93” high, Load Height: 49.5” from floor line, Max Temp: 1400°F ...more
36" width x 36" H x 72" D Roller Hearth Temper Furnace, 1200°F, gas-fired, 800000 BTU, 480 V., 3-phase, roller rails
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer: Surface Combustion, Type: Gas-Heated Temper Furnace, Workable Dim’s: 36” wide x 48” deep x 38” high, Rating: 480 Volts, 3-Phase, 60 Hz, Maximum Temp: 1450°F, Heating: Natural gas, 600,000 BTU, Burner: Eclipse Package Burner Type 200JIB, Door: Pneumatically operated with ...more
36" width x 48" H x 30" L VFS, front load vacuum temper furnace, 1200°F, 480 V., 3-phase
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Vfs
Manufacturer: VFS, Type: Front Load Vacuum Temper Furnace, Load Dim’s: 36" wide x 48" deep x 30" high, Max Temp: 1200°F, Power: 480 Volts, 3-Phase, 60 Hz, VRT: 225 KW, 350 Amps, Control Panel: 120 Volts, Maximum Load: 2500 pounds, Cooling Fan: 50 HP Spencer, Mechanical Pump: Stokes 212, Controls:, Opto Vac ...more
44" width x 24" H x 240" D Dow #PBX-3612024E, Continous Temper Furnace, 460V., 143 HP, Honeywell Controls, Round Chart Recorder
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Dow
Manufacturer: Dow Furnace Company, Type: Continuous Temper Furnace, Model: PBX 3612024E, Serial Number: PBX-103E, Working Dim’s: 44” wide x 240” deep x 24” high, Power: 460 Volts / 3-Phase / 60 Hz, Max Temp: 1400°F, Heating: Electric, 100 KW, Total Load: 143 HP, Controls:, Honeywell Digital ...more
54" width x 54" H x 40" D Demco, elect temper furnace, 1200°F, 480 V., 3-phase, Eurotherm Nanocac programmable controller
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Demco
Manufacturer: Demco Technologies, Type: Electric Batch Temper, Year Built: 1999, Workable Dim’s: 60” wide x 45” deep x 52” high, Overall Dim’s: 173” wide x 67.5” deep x 169” high, Shipping Dim’s: 173” wide x 67.5” deep x 138” high, Rating: 480 ...more
60" width x 72" H x 12" D Wisconsin Oven #PIT-60/60-12E, temper furnace, 1250°F, Eurotherm 3204 temperature controller
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Wisconsin
Manufacture: Wisconsin Oven, Type: Electric Pit Temper Furnace, Serial / Model: 0788A / PIT-60/60-12E, Max Temp: 1250°F, Gross Load: 4000 pounds, Load Height: 60”, Heating: 480V / 3-Phase / 60 Hz, 252 Amps, Plug Heater, Power: 180 KW, Working Dim’s: 60” ID x 60” deep, Overall Dim’s: ...more
84" width x 60" H x 72" D Can-Eng, batch tempering furnace, 1400°F, 480 V., 3-phase
Category: Tempering Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Can-Eng
Manufacturer: Can-Eng, Type: Gas-Fired Batch Tempering Furnace, Heated: Natural gas @ 5 PSIG, Serial No.: CSJRPMGT-2 (furnace built 2012), Workable Dim’s: 96” wide x 90” deep x 60” high, Note: There is a stainless-steel tray on top of the piers. It measures 90” wide x 75.5” wide. ...more
Tooling and Accessories - Miscellaneous
2 Results
Holding Station, 36" W x 72" L
Seller: Heat Treat Equipment Co
Location: Canton, MI
Type: Holding Station, Size: 36’ wide x 72” long.
Holding Station, 36" W x 96" L
Seller: Heat Treat Equipment Co
Location: Canton, MI
Type: Holding Station, Size: 36’ wide x 96” long.
Tumble Blast Cleaning and Shot Peening
1 Result
6 cu.ft. Wheelabrator #WTB-6.0, rubble blast tumblast shot blast machine, 36" width x 30" diameter, dust collector
Category: Tumble Blast Cleaning and Shot Peening
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Wheelabrator
Model: WTB-6.0
Manufacturer: Wheelabrator, Type: Tumblast Shot Blast Machine, Serial Number: 300592 (3201-16), Model Number: WTB-6, Working Area: 36” wide x 30” diameter – 6 cubic feet, Dimensions: 84” wide x 88” deep x 130” high, Power: 240V / 3-Phase / 60Hz, Rubber belt Tumblast, Direct drive ...more
24" width x 36" D x 18" H Abar Ispen #VTFC-414R, Horizontal Vacuum 1400°F, 480 V., 10 HP
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
24" width x 60" D x 24" H, Abar vacuum furnace, 2250°F, electric, #V-1131
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
Manufacturer: Abar, Type: Horizontal 2Bar Vacuum Furnace, Model/Year: HR 34 (2 Bar, 15 psi), BM555, 1980, Load-Area: 24” wide x 60” deep x 24” high, Overall-Dim's: 185” wide x 112” high x 295” deep, Approx-Weight: 12,000 pounds, Voltage: 480V / 3-Phase / 60Hz, Max-Temp: ...more
24" width x 60" D x 24" H Abar, horizontal vacuum furnace, 2450°F, 2-bar, 150 KW, 1980
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
Year: 1980
Manufacturer: Abar, Type: Horizontal Vacuum Furnace, Model-Year: HR 34 (2 Bar, 15 psi), BM555, 1980, Load-Area: 24” wide x 60” deep x 24” high, Overall-Dimensions: 185” wide x 112” high x 295” deep, Voltage: 480V / 3-Phase / 60Hz, Max-Temp: 2450°F, Capacity: 2,000 pounds ...more
30" width x 52" D x 30" H CI Hayes, front load vacuum furnace, 1450°F, Honeywell DCP216 temperature control
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer: CI Hayes, Type: Front Load Vacuum Furnace, Model: VMHT, Serial Number: 15534, Load Area: 30” wide x 52” deep x 30” high!, Maximum Temp: 1450°F, Electrical: 480V / 3-phase / 60 Hz; 60 KW max. continuous input, Cooling Fan: 75 / 19 HP, 2-speed, Pump:Stokes 212-11-10, Transformer: ...more
36" width x 48" D x 32" H Seco Warwick, vacuum carburizing furnace w/quench, gas fired, 2300°F
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Seco Warwick
Manufacture: Seco Warwick (installed 2012), Type: Vacuum Oil Quench Furnace, Workable Dim’s: 36” wide x 48” long x 32” high, Max Load: 2600 pounds, Power: 240 KW, Maximum Temp: 2300°F, Temp Uniformity: ±10°F, Vacuum: 10-2 Tor, Heating Zones: One (1), Thermocouples: Type ...more
40" width x 63" H x 51" D Despatch #V-39, Walk-In Oven, 480V., 500°F, Honeywell Control, round chart recorder
Category: Walk-in Type Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Despatch
Manufacturer: Despatch Industries, Type: Walk-In Oven, Serial Number: 117302, Model: V-39 standard, Working Dimensions: 40” wide x 51” deep x 63” high, Power: 480 Volts / 3-Phase / 60 Hz, Heater: 26 KW, Max Temp: 500°F, Controls:, Honeywell Digital Controls, Round chart recorder.
72" width x 91" H x 60" D Jackson #5604, Walk-in Oven, 500°F, 230V., 1200 CFM, Honeywell Control, Partlow MRC 5000 round chart recorder
Category: Walk-in Type Ovens
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Jackson
Manufacturer: Jackson Oven Supply, Type: Electrically Heated Walk-In Oven - Includes natural gas incinerator, Serial / Model No.: 7036 / 5604, Working Dim’s: 72” wide x 60” deep x 91” high, Overall Dim’s: 84” wide x 72” deep x 112” high, Weight (approx.): 5500 pounds ...more
Washer Parts - Miscellaneous
1 Result
Surface Combustion, electric spray / dunk washer, 36" W x 72" D x 36" H, 160-180°F, 460 V., 3-Phase
Category: Washer Parts - Miscellaneous
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion










































































































