Buy or Sell Your Vertical Lathe

SERIAL. E2678MODEL. DL262000YEAR NEW. 20078SWING OVER WAYS. 26"SWING OVER CROSS SLIDE. 17-3/8"SWING IN GAP. 35-3/4"DISTANCE BETWEEN CENTERS. 120"SPINDLE SPEEDS. (16) 7.5 TO 1000 RPMFEEDS ENGLISH.0017 TO.058 IPRFEEDS METRIC. 0011 TO.0772 MMPRTHREAD ENGLISH. 7/16 TO 80 TPITHREADS METRIC.05 TO 80 MMSPINDLE HOLE. 5"CHUCK ...more

Available in Grande Prairie, AB, Canada, this vertical sour inlet separator from C & T Equipment (Model U0845.2) s a diameter of 24 inches and a length of 90 inches. Built in 2007, it operates under a maximum pressure of 1480 psi and a maximum temperature of 100°F. The unit is portable and designed for ...more

SPINDLE HOLE.: 3-1/8", SWING.: 30", CENTERS.: 168", LOWEST RPM.: 12, HIGHEST RPM.: 1,280,.: 17" STEADY REST ROLLER 3 POINT, 12" FOLLOW REST, NEWALL 2-AXIS DIGITAL READOUT, 3-JAW CHUCK, INCH & METRIC THREADING, INCH & METRIC FEEDS, MOTOR kW.: 15, Machine Type.Lathes, Engine Manufacturer.SUMMIT Model.N/A ...more

SERIAL.: 523-1236-224, MODEL.: 1236 MICROMASTER, TABLE SIZE.: 12" X 36", LONGITUDINAL TABLE TRAVEL.: 41", CROSS TRAVEL.: 14", VERTICAL TRAVEL.: 19-1/4", SPINDLE DRIVE MOTOR.: 5 HP, LONGITUDINAL FEED RATES.: 10 TO 90 FPM, VARIABLE, CROSS FEED RATES.:.010" TO.500", VARIABLE, SPINDLE DOWN FEED RATES.:.0001" TO.003" ...more

Used Approximately 290 Gallon Stainless Steel Tank, Capacity: 290 gallons, Material of construction: 304 stainless steel, Dished top, dished bottom, Portable tote, _UNKNOWN_ 290 GALLON, Capacity. 290 gal, Type of stainless. 304, Type Of Heads. Dished, Vertical/Horizontal. Vertical.

ATECH CRATER-06 A-700 Hydro-Pneumatic Miter Up-Cut SawHeavy duty upcut miter saw designed for straight and miter cuts of PVC (vinyl), aluminum extrusions and wood. 0-15- 22, 5- 30- 45- 60-75 Angle pin locks: -- 28" Blade cap.; (2) horizontal & (2) vertical pneumatic clamps for firm material control through the ...more

Yoder Rollformer, Model M 2-1/2 S, -9 stands on 2 separate bases, -one 7 stand base with 2 stands, and 2 side guide stands, -one 8 stand base with 7 stands, and exit straightening fixture, -3" dia. Shafts, -26" Roll Space, -5.5" to 10" Vertical adjustment, -18" Horizonal centers, -8.5" base to CL of bottom shaft, -In ...more

Cutting Capacity:, 90 degrees: 18" horizontal, 22" vertical., 45 degrees: 18" horizontal, 12.75" vertical., Round: 18" diameter., Blade:, Length: 14'6"., Width: 1"., Thickness: 0.035"., Speed:, Range: 50-450 FPM (feet per minute)., Feed Force:, Range: 0-140 lbs (adjustable)., Work Table:, Size: 24.25" x 33"., Height: ...more

IMA BIMA-610, 4' x 16′ CNC MACHINING CENTER, (1998), (460/60/3 electrics), S-4535, - 10 HP, 230/460/60/3 tool-changer type router spindle, - (12) station traveling rotary tool changer, - (1) 7-spindle & (1) 5-spindle point-to-point vertical drill blocks, - X & Z axis ball-screw & Y-axis rack ...more

Pre Owned Kent Model KGS-250AHD Surface Grinder, New 1998, Overall Table Working Area 8” X 18”, Longitudinal Table Travel 21.25”, Cross-feed Table Travel 10.5”, Distance Spindel Center to Table 18.6”, Grinding Wheel Dims 8” X 3/4” X 1 14”, Spindle Speed 3480, Vertical ...more

Used Freude Titan GmbH approximately 81 litre total capacity and approximately 50 litre working capacity 316Ti stainless steel mixing vessel. Unit measures approximately 450mm diameter x 447mm straight side. Has welded dished bottom and open top. Includes top entry, off-set 3-blade agitator with motor. Unit is mounted ...more

Rebuilt 20 Stand RLM Rollformer offers a 3" spindle diameter, 20" roll space, and 24" horizontal centers. a 50 HP motor and complete mechanical parts, this model is ideal for your rollforming needs., Rebuilt in 2026, NOTE: This is a 20 Stand Machine. We can build a machine with additional stands - P.O.R., 20 Stand - ...more

, SP MFG 3-JAW LATHE CHUCK 10 in with plain back mount. Used, suitable for various tooling tasks. Overall diameter: 10, center hole: 2.25, height: 5.25. Ideal for those seeking reliable lathe accessories., Spec Sheet:, SP MFG 3-JAW LATHE CHUCK 10 in - w/ PLAIN BACK MOUNT, USED, Brand: SP MFG, Type: 3 Jaw Chuck ...more

SERIAL. 11347, MODEL. 18D, TABLE CHUCK DIAMETER. 36", MAX SWING INSIDE GUARDS. 40", SEGMENTED GRINDING WHEEL DIAMETER. 18", MAXIMUM WORK HEIGHT. 12", TABLE SPEEDS. (6) 6 TO 33 RPM, GRINDING WHEEL SPEED. 720 RPM, VERTICAL DOWN FEED RANGE.004 TO.080 IPM, ELECTRO-MAGNETIC CHUCK W/CONTROLS. YES, TRABON LUBE SYSTEM. YES ...more

This is a very unique USED Emco 4" 3-Jaw self-centering universal lathe chuck with solid one-piece jaws and a #5 Morse Taper Shank. It is in excellent condition and is non-rotating type chuck. You would use this on fixtures on milling machines or drill presses, like rotary tables. DOES NOT INCLUDE THE CHUCK KEY! We ...more

Swing Over Bed Way: 32", Swing Over Cross Slide:20", Center Distance: 118", Spindle Bore: 5.5", Spindle Speeds: 5.4 To 720 Rpm's, Spindle Nose: D-11, Chuck Size 24" 4-Jaw With 2 Piece Jaws (New Gator), Chuck Size 18" 3-Jaw With 2 Piece Jaws (New Gator), Feeds: 0.06-0.912 mm/I.P.R., Threads: Inch & Metric, Main ...more

Used Approximately 3,000 Gallon Stainless Steel Tank, Capacity: 3,000 gallons, Dimensions: 96" dia. x 94" straight side, Flat top, dish bottom, Side bottom manway, Center bottom discharge, Mounted on (4) legs, _UNKNOWN_ 3,000 GALLON, Capacity. 3,000 gal, Diameter. 8', Height. 7.83', Type of stainless. ...more

FANUC R-2000iB/210F robot with R-30iB controls, used. 6 axes, it offers a 463 lb payload and 105" reach both horizontally and vertically, ideal for various industrial applications requiring precision and strength., Spec Sheet, FANUC R-2000IB/210F + R30IB, # Axis. 6, Payload. 463 lb, Horizontal Reach. 105", Vertical ...more

Used approximately 5000 gallon Pfaudler Chemstor glass lined tank. 8'6" O.D. X 10'6" straight length. Welded dished heads. With Series 2711 glass. Rated 30 psi at 300 deg. F. Built 1975. Serial #R265-0638. Openings top: (1) 18" manway W/cover, (2) 3", (1) 4", (1) dished side, (2)3" for stand glass, (1) 3" for ...more

FANUC R2000IB/210F, used industrial robot with 6 axes, 463 lb payload, and a vertical reach of 105 inches. Ideal for heavy-duty tasks requiring precision and reliability. Explore advanced automation solutions with this robust FANUC machine., Spec Sheet, 2009 FANUC R-2000iB/210F + R-30iA, Dimensions. 98X48X70, Weight. ...more

GIBEN - G4 EVO 510: CNC Router (ATC & Boring: + Rake & Offloading -- 5' x 10' "Matrix" grid Phenolic surface for "Nested Base Manufacturing". -- Working CapacityX-Axis 126" (3,200 mm); Y-axis 62.9" (1,600 mm); Z-axis stroke is 9.8" (250 mm); max. material thickness 4.7" (119 mm). -- Positioning Speed ...more

SERIAL. 13618-569, MODEL. 24-HMW-1-1/2", STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2".

Surface Combustion 36 x 72 x 36 with top cool. Completly rebuilt in 2018. 8 Vertical top mounted U-tubes. 6,000 gallon oil tank. Cable of running 6,000# loads. SSI controls. Furnace is in Great condition.

60 Ton, CROSBY STRAIGHT SHANK "HOOK ONLY" 2005 NEW IN BOX, MODEL TA, MODEL TA, "NEW IN BOX", TURNED,THREADED & DRILLED, CROSBY PART NO. 1024929, ACTUAL SHANK LENGTH 12", ACTUAL THREADED SECTION 4", SHANK TURNED DIAMETER 3 3/4", THREADS PER INCH 12 TPI, ACTUAL OVERALL LENGTH 34", ACTUAL OVERALL WIDTH 18", APPROX. ...more

Used Approximately 600 Gallon Stainless Steel Jacketed Mix Tank, Capacity: 600 gallons, Dimensions: 60" dia. x 54" straight side, Top, center-mounted agitator, Mounted on legs, _UNKNOWN_ _UNKNOWN_, Capacity. 600 gal, Diameter. 5', Height. 4.5', Type of stainless. Stainless Steel, Vertical/Horizontal. Vertical ...more

Republic Lagun 10″ x 50″ Variable Speed Vertical Milling Machine, FTV-2, Inventory # 10061, Model: FTV-2, S/N: 45676, Table Size: 10″ x 50″, Max. Weight of Workpiece: 441 lbs., X-Axis: 34.62″, Y-Axis: 16″, W-Axis: 16″ (Vertical Knee), Z-Axis: 5″, Distance from Spindle ...more

Parker Majestic 2Z Surface Grinder 6″ x 18″ Capacity Power Elevation On Ginding Wheel Complete Re-Conditioned March 2024 S/N: 5128-ZV2-E-84 Model: 2Z NEW 6″ X 18″ Chuck Power Elevation 1.5 HP Variable Speed Spindle 20″ Vertical Height Travel – Table to Spindle Center NEW Cross Slide ...more

GIDDINGS AND LEWIS OUTBOARD SUPPORT (Tailstock), HORIZONTAL BAR, Table Type Bar, For M-300T, Condition: Very Good, BAR DIAMETER. 4‘’, VERTICAL TRAVEL. 36’’, BASE SIZE: Fits ways that are, Thick. 2’’, BASE OVERALL WIDTH. 29-3/16’’, Left Way ...more

SERIAL. 2446, MODEL. V348, TABLE SIZE. 10" X 48", SPINDLE SPEEDS. 57 TO 4500 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 36", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R8, HEAD TILTS, FRONT/BACK. 45 ...more

UTUBE NUMBER: 4018, MANUFACTURER: CUSTOM, Number of Stands: 3, Spindle Diameter: 1-1/2″, Roll Space: 6″, Horizontal Centers: 7-3/4″, Base to Center of Lower Shaft: 4-1/8″, Vertical Centers: 3″ – 4″, Gear Driven with Chain, LOCATION: Universal Warehouse, Perrysburg, Ohio ...more

SOUTH BEND VERTICAL MILL, MODEL: Chipmaster II, SERIAL NUMBER: SE37301, Table Size: 10" x 50", Longitudinal Travel, Manual: 33", Longitudinal Travel, Power: 30", Vertical Knee Travel: 16", Cross Travel: 16", Ram Travel: 22", Spindle Taper: R-8, Spindle Speeds, Infinitely Variable: 55 - 6000 RPM, Power Feed: ...more

SERIAL.: 125157, MODEL.: SERIES I, AREA OF TABLE.: 42" X 9", SPINDLE SPEEDS.: 60 TO 4200 RPM, SPINDLE FEEDS.:.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL.: 30", CROSS TRAVEL.: 12", VERTICAL KNEE TRAVEL.: 16", QUILL TRAVEL.: 5", RAM TRAVEL.: 12", DEPTH OF THROAT.: 6-3/4" TO 18-3/4", TAPER IN SPINDLE.: R8, HEAD TILTS ...more

SERIAL. 194382, MODEL. SERIES I, AREA OF TABLE. 42" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R8, HEAD TILTS ...more

RBB DIAMANT KING 6000 Vertical Laminate Glass Saw / Cutting System - 6000 x 3200 mm (236" x 118")High quality Italian manufactured automatic machine for the vertical and horizontal cutting of thick, bullet-proof and laminated glass sheets. The load-bearing structure is in hot-galvanised steel and is designed to ...more

Used approximately 2,000 gallon vertical fiberglass tank. 72" diameter X 10' straight side. Dished top, flat bottom., _UNKNOWN_ 2,000 GALLON, Capacity. 2,000 gal, Dimensions. 72" diameter x 10' straight side.

Burr Masher, -4" Dia. x 68" Face Rolls, -Spring Loaded Independent Vertical Adjustment, -Top Roll Opens by Hydraulic Cylinder, Alligator Style, -In Storage: Toledo, OH.

SERIAL. 2526, MODEL. A24UP/1500, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 12-1/2", DISTANCE BETWEEN CENTERS. 62", SPINDLE SPEEDS. 45 TO 500 RPM, FEEDS.0009 TO.0320 IPR, THREADS (INCH). 1 TO 56 TPI, THREADS (METRIC).05 TO 36 MM PITCH, DIAMETER OF SPINDLE HOLE. 2-1/2", CHUCK. 12" 6-JAW, SPINDLE FORWARD AND REVERSE. ...more

Main s CHUCK-4JAW-8-D1-4:, Very High Quality lathe chuck Higher precision than anything you will find near this price A big upgrade from most standard lathe chucks, but a very reasonable price Precision Balanced for better running Removable / Reversible Jaws for ID and OD Work D1-4 Camlock Mounting built in to the ...more

Spec Sheet:, Precise Lathe Chuck 12 3 Jaw, USED, Brand: Precise, Lathe Chuck, Jaws: 3, Overall Diameter: 12, Through Hole: 3.

TABLE SIZE: 10" X 50", T-SLOTS: (3) 5/8", TABLE LONGITUDINAL TRAVEL: 34", TABLE CROSS TRAVEL: 16", KNEE VERTICAL TRAVEL: 16", RAM TRAVEL: 20", SPINDLE SPEEDS: 60 - 4500 RPM, SPINDLE MOTOR: 3 HP, SPINDLE TAPER: R-8, HEAD SWIVEL, L-R: 90 DEG., HEAD TILT, F-B: 45 DEG., POWER QUILL FEEDS: 0.0015, 0.003, 0.006 IPR, QUILL ...more

, MANUFACTURER: KOHLER A.S., TYPE: 19 ROLL BACKED UP LEVELER, No. OF ROLLS: 19, No. OF DRIVEN ROLLS: 19, ROLL CONFIGURATION: 8 OVER 9, ROLL DIAMETER: 0.94" (24mm), ROLL FACE: 7" (178mm), TYPICAL THICKNESS RANGE: 0.0157" - 0.098" (0.4mm - 2.5mm), ROLL BEARING LUBRICATION: FORCED HYDRAULIC SYSTEM, W/INTERNAL TANK AND ...more

Overview, This Hurst 4VT-X-30-150 vertical tubeless steam boiler was manufactured in July 2023 and is ASME Section I certified by Hurst Boiler & Welding Co., Inc. With 30 horsepower capacity (1,035 lbs/hr steam output) and 150 PSI maximum working pressure, this complete system includes the boiler, feedwater ...more

SERIAL. 1-0004/691, MODEL. DA250/1.5, YEAR NEW. 1979, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 13-1/2", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 33 TO 1500 RPM, LONGITUDINAL FEEDS. 0.0028 TO 0.0 212 IPR, THREADS. 1/2 TO 92 TPI, METRIC THREADS. 0.5 to 28 MMPR, DIAMETER OF SPINDLE HOLE. 2-3/8", 3 JAW CHUCK. ...more

SERIAL. 50865, MODEL. 330X1000, SWING. 15", CENTER. 40", SWING OVER CROSS. 8", SWING IN GAP. 18", GAP LENGTH. 3.5", DIAMETER OF SPINDLE HOLE. 1.5", SPINDLE RPM. 75 TO 2000 RPM, ENGLISH THREAD.4 TO 5.6 TPI, METRIC THREAD.4 TO 5.6, FEEDS.001 TO.018 IPM, MOTOR. 3 HORSEPOWER, CHUCKS. 7.5" 3 JAW AND 10" 4 JAW.

Make: Favretto, Model: MG-300 2T, Year: 1995, Machine Location: Upon Request, Vm-22 Dual Head Rough and Finishing Surface Grinder, Table Size 59.05” X 118.11”, 6 Magnetic Chucks 59” X 19.68”, Max. Grinding Height 27.5”, Load Capacity 19,000 Lbs, Grinding Wheel Size 20” X 8” X ...more

SERIAL. 3J6F1L-34 MODEL. 6 HORIZONTAL WORKING SURFACE OF TABLE. 104-1/2" X 20" SPINDLE SPEEDS. (24) 14 TO 1400 RPM LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM VERTICAL FEEDS. (32) 3/32 TO 22-1/2 IPM LONGITUDINAL TRAVEL. 60" CROSS TRAVEL. 18" VERTICAL TRAVEL. 20" DISTANCE SPINDLE TO TABLE. 3/4" MINIMUM, 20-3/4" ...more