Buy or Sell Your Plastic Molders

Used Sidel PET Preform Fed Blow Molder, Manufacturer: Sidel, Model: SB01, Serial: 78, Single head design with mold for 20 ounce PET bottle, Includes 32-position preform conveyor with 15" long preheat oven and exhaust blower, Year: New 2000, and reported reconditioned January 2023, Used 100 ton CSD horizontal hydraulic ...more

Plastic Blow Molder, manufactured by Eceng Machine. Unit can be used from 2-Cavity to 6-Cavity with a capacity of up to 1,000 500ml bottles/hr. Can produce up to 2L bottles. Complete with PLC control panel. Previously used in production of plastic packaging., Basis: FOB.

Used 85 ton Battenfeld horizontal injection molder, model BK850/200, maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", with Unilog 4000 controller, built 1985.

Used Impco model B30-SDH-180 dual 2.5 lb. head blow molder (5 lbs. single head). Has 3.77" reciprocating screw extruder and updated Omron PLC touch screen controls for machine sequencing and head programming, 30" wide X 24" high platens with 23" of stroke, and 33-ton clamp. Includes pneumatic auxiliary circuits ...more

Make: Magic, Model: ME-L1/ND, Year: 2018, Machine Location: Upon Request, -Maximum Blown Container Volume: 1000 cm3, -Closing Force: 30kN, -Dry Cycle: 1,1 Sec., -Power Electric: 6 kW, -Opening Travel: 140 mm, -Max. Mould Dimensions:(WxLxH) 290/2×85/280 mm, -Number Of Screws 2, -Extruder:Screw Diameter: 38 L/D ...more

Manufacturer EngelCondition UsedStock Number 47518888121.

Condition UsedStock Number 47518888119.

Automatic 4-Cavity Blow Molding Machine, Model KM4A-2L, rated for 5500 bottles per hour output, powered by PLC and HMI system. Includes Parker high-pressure blowing valve, SMC Pneumatic cylinder, Omron sensors, and Schneider low-voltage electric components. Offered with Preform Unscrambler and 120 ML Blowing Mold ...more

, 2019 2200 Ton UBE 2200MMX-470:, Shot size: 426.8 oz, Screw diameter: 150 mm, Tie bar spacing: 72.83" x 64.96", Platen size: 98.42" x 88.58", Hours: 26,836, 4 Hydraulic valve gates, 2 programmable hyd corepulls, 2 programmable air blows, No shut off nozzle., Machine is still under power and in good running ...more

, 2019 100 Ton Engel e-victory 170/100 US (Hybrid), Shot size: 2.76 oz, Screw size: 30 mm, Tiebarless, Platen size: 25.59" x 23.62", Max. Open daylight: 31.5", Control: CC300, Hours: 250, Moretto Resin Loader/ Feed Throat Dryer, Engel “PIC A” Sprue Picker., Machine is under power. It is a sample machine ...more

, 2015 197 Ton Netstal Elion 1750-530 Electric, Shot size: 8.9 oz, Screw size: 45 mm, Tie bar spacing: 22.04" x 22.04", Platen size: 32.67" x 33.26", Max. Open daylight: 37.40", Control: DSP, Hours: 31,895, We have a total of (18) Netstal Elion 1750 electric available, with shot sizes from 1.66 to 8.9 oz., The TCU ...more

, 2006 1125 Ton Milacron MG-1100-232, Shot size: 232 oz., Screw diameter: 125 mm, Tie bar spacing: 61" x 47.2”, Platen size: 79.5" x 64.8", Max. daylight opening: 94.5", Control: Mosaic, Machine is in good running conditions and under power., Machine is available for inspection., Imperial Metric Tonnage 1,125 T ...more

, 2011 674 Ton Haitian MA6000-4500, Servo-Hydraulic, Shot size: 110 oz, Tie bar spacing: 34.65" x 34.65", Platen size: 51.18" x 51.97", Max. Open daylight: 70.08", Control: Keba, Voltage: 460v, 3 core pull circuits, airblow on both movable and stationary mold, 2 circuits per side, Press also has hydraulic valve gate ...more

, 2015 197 Ton Netstal Elion 1750-530 Electric, Shot size: 8.9 oz, Screw size: 45 mm, Tie bar spacing: 22.04" x 22.04", Platen size: 32.67" x 33.26", Max. Open daylight: 37.40", Control: DSP, Hours: 53,482, (2) Wittmann TCU units., Imperial Metric Tonnage 197 T 178.716 t Shot Size 8.9 oz 252.3 g Year 2015 2015.

used sidel combi sensofill model 40/24/12 esl triblock filling line. can be upgraded to aseptic filling as well. capable of speeds from 120 - 300 bpm. fill range from 5oz - 80oz (with proper change parts). cap: 38mm screw cap (bericap sk38/15 2t sfb 1.2mm e-wall acf (3510))includes mold and filler change parts for ...more

The 2024 Chen Hsong SM700-TP-SVP/2 (D2) 770 Ton Injection Molder is built for high-tonnage, precision plastic molding of large, deep-cavity parts. Ideal for automotive components such as bumpers, dashboards, and door panels, as well as logistics pallets and appliance housings. Designed for rigidity, sealing ...more

Used Battenfeld injection molder, model 45/200/02/08/6/20, 45 ton clamp force, 16" x 16" platen, 10" x 10" mold area with mold, Unilog 3000 controls, 460 volt, serial# 1900, built 1987.

, 2008 28 Ton Arburg Allrounder 275 V 250 - 70, Vertical Clamp - Vertical Injection unit - Rotary table, Shot size: 1.4 oz, Screw diameter: 18 mm, Max. Open daylight: 14.8", Machine is in good running conditions., Imperial Metric Tonnage 28 T 25.401 t Shot Size 1.4 oz 39.7 g Year 2008 2008.

Platen Size: 21" x 18". Shuttle Table Size: 10" x 62". Vertical Injection Mold. Mold Size: 12.125" x 20". Shot Size: 5 oz. Manufactured 1990..

Make: Amsler (Mag-Plastics), Model: SSB02, Year: 2008, Machine Location: Minnesota, Magplastic SSB02 PET Bottle Blow Moulding Machine, 2008, – Previously used for 1.75L, 1L, and.75L PET bottles, – System includes tote dumper, pre-form conveyor, and bottle blower, Machine technical data:, – Press ...more

Make: Husky, Model: RS70/60, Year: 1998, Machine Location: Illinois, -300 Ton Clamping Force, -59 Oz Shot Capacity, -60 MM Screw Diameter, -720mm x 720mm Distance Between Tie Bars, -460 V, 3P, 60 Hz Electrical Requirements.

, 2005 720 Ton Nissei FV9100 Injection Molding Machine:, Shot size: 135 Oz., Screw diameter: 100 mm, Tie bar spacing: 43.3" x 43.3", Platen Size: 60.6" x 60.6", Max. Open daylight: 75.2", Machine is under power and in good running conditions., Imperial Metric Tonnage 720 T 653.174 t Shot Size 135 oz 3,827.2 g Year ...more

Used Uniloy 6-cavity mold number 60043 for 32 ounce LDL bottle. Includes trim tooling. Previously used with Uniloy model 350R and 250R blow molders. Part wt. without flash 49 grams., UNILOY 32 Oz.

Used Uniloy plastic bottle mold for 42 ounce LDL squeeze bottle. 5-cavity design, includes trim molding. Previously used with Uniloy 350R and 250R blow molders. Includes trim tooling. Part wt. 63.4 grams without flash., UNILOY 42 Oz.

, 2012 110 Ton Sumitomo SE100DUZ-C250M, All Electric Injection Molding machine, Shot size: 4.8 Oz, Screw diameter: 36 mm, Tie bar spacing: 18.11" x 16.14", Platen size: 25.59" x 23.62", Max. Open daylight: 29.92", Machine in good running conditions. Under power., Comes with Picker., Imperial Metric Tonnage 110 T 99.79 ...more

, 2004 618 Ton Nissei FV9000 Injection Molding Machine:, Shot size: 105 Oz., Screw diameter: 90 mm, Tie bar spacing: 38.2" x 38.2", Platen Size: 53.5" x 53.5", Max. Open daylight: 71.3", Machine is under power and in good running conditions., Imperial Metric Tonnage 618 T 560.641 t Shot Size 105 oz 2,976.7 g Year 2004 ...more

, 2011 83 Ton Sumitomo SE75DUZ-C160S, All Electric Injection Molding machine, Shot size: 2.8 Oz, Screw diameter: 32 mm, Tie bar spacing: 16.14" x 14.17", Platen size: 22.83" x 20.87", Max. Open daylight: 27.95", Machine in good running conditions. Under power., Comes with grinder and picker., Imperial Metric Tonnage ...more

, New in 2001 300T ENGEL ES-1050H-330L-300TL:, Shot size: 20 Oz / 8.2 Oz., Secondary Injection unit in L-configuration. Non-op side., Tiebarless, Platen size: 35.6” x 35.8”, Control: CC100., Voltage: 460 volt., Rotary table mounted on moving platen., Table diameter: 41.34” (1050 mm)., Options: Robot ...more

, 2015 501 Ton Nissei FNX460III-160A, Hybrid Injection Molding machines, Shot size: 54 oz, Screw diameter: 80 mm, Tie bar spacing: 32.3” x 32.3”, Platen size: 46.9” x 46.9”, Max. Open daylight: 55.1”, Control: Tact IV, 2 airblows, 2 hydraulic core pulls, Ejector confirmation, SPI Robot ...more

Used Uniloy #80200 128 ounce 4-cavity mold for oval handle bottle. Designed for use with 350R blow molder. Includes trim tooling. Part wt. 143 grams without flash. 38mm cap size., UNILOY 128 Oz.

, 2006 500 Ton Toyo Si-500III-K600U All Electric:, Shot size: 67.9 Oz, Screw diameter: 83 mm, Tie bar spacing: 36.02" x 36.02", Platen Size:48.03" x 48.03", Control: PLCS-11, Machine is in good running conditions and under power., Imperial Metric Tonnage 500 T 453.593 t Shot Size 67.9 oz 1,924.9 g Year 2006 2006.

, 2017 899 Ton Haitian MA8000II-6800, Hybrid Injection Molding machine, Shot size: 95.98 oz, Screw size: 90 mm, Tie bar spacing: 39.37" x 39.37", Platen size: 57.68" x 58.46", Max. Open daylight: 80.31", Keba control, Hours: 16,000, Imperial Metric Tonnage 899 T 815.56 t Shot Size 96 oz 2,721 g Year 2017 2017.

, 2018 360 Ton Haitian MA 3200/1700 Servo-Hydraulic, Shot size: 31.4 Oz, Screw size: 65 mm, B, Tie bar spacing: 26.77" x 26.77", Platen size: 38.97" x 38.97", Control: Keba, Machine is in excellent shape., Imperial Metric Tonnage 360 T 326.587 t Shot Size 31.4 oz 890.2 g Year 2018 2018.

Make: Sterling, Model: S-38, Year: 1985, Machine Location: Missouri, Max. Head Tooling 10”, Clamp: 44” Wide Between Tie Bars, 32” High, 42” Max Open, 16” Min., 125-Hp. Extruder Drive Motor, 30-Hp. Hydraulic Clamp Motor, 3.5” Extruder, Cast Aluminum Barrel Heaters, Barber Colman Maco ...more

, 2004 2200 Ton Van Dorn Caliber 2200, Shot size: 265 Oz, Screw diameter: 130 mm, Tie bar spacing: 75.4" x 61.1", Platen size: 102.3" x 94.5", Max. Open daylight 134.2", Control: VDU, Retractable tie bar / tie bar puller., Machine is under power and in good running conditions., Imperial Metric Tonnage 2,200 T ...more

, 2015 1000 Ton UBE Servomax 1000W UST, Hybrid (Servo Hydraulic), Shot size: 192.8 oz, Screw diameter: 112 mm, Tie bar spacing: 60" x 50", Platen size: 76.92" x 66.59", Max. Open daylight: 107.86", Hours: 31,000, 2 core pull, 2 air blow, Valve Gates., Ran PP and ABS., Notes: Good overall condition., Imperial Metric ...more

, Tonnage 198 Ton, Year model 2011, Make Krauss Maffei, Model KM180-750 AX, Shot Size (Oz) 12.59 Oz, Screw Diameter 50 mm, Tie Bar Spacing 22.05" x 20.08", Platen Size 31.10" x 29.13", Max Daylight 41.34", Hours 55,407, Controls MC6, Corepull Yes, Voltage 460v, Machine is under power and in good running conditions. ...more

, 2004 1850 Ton Mitsubishi 1800MMIIIW-240:, Shot size: 220 oz, Tie bar spacing: 70" x 62", Max. Open daylight: 125.98", Mac VII Controls, Machine is under power., Imperial Metric Tonnage 1,850 T 1,678.294 t Shot Size 220 oz 6,236.9 g Year 2004 2004.

, 2004 500 Ton Van Dorn 500HT-4300:, Shot size: 63.5 Oz, Screw diameter: 80 mm, Tie bar spacing: 32.5" x 32.5", Platen size: 47.8" x 47.8", Max. Open daylight: 61", Control: Pathfinder 3000, Machine is in good running conditions and under power., Imperial Metric Tonnage 500 T 453.593 t Shot Size 63.5 oz 1,800.2 g Year ...more

Used Jomar Blowmolding Machine Model 135E S/N 4000-034 Extruder Diameter: 3" Egan Extruder, L/D Ratio: 25:1 Horsepower: 125 Clamp Tonnage:135 Blow Clamp Tonnage: 28 Shut Height:10" Press Stroke: 6" Max Die Set Size: 35.5" Wide x 19" Deep Dual Allen Bradley PLC 2/16 With XY Com Color CRT 460V, 360A New In 1994.

Unused Engel e-motion 440H/50MV/380 T combi injection molding machine designed for applications in packaging and medical technology. 3,800 kN (310 US tons) clamping force. Toggle level machine type. Machine serial number 258676, built in 2023.

Unused Engel e-victory 765H/170W/400 combi injection molding machine for high precision manufacturing. 4,000 kN (450 US tons) clamping force. Tie-bar-less design. Machine serial number 258691, built in 2023.

, 2015 1000 Ton Haitian JU9000II Servo-hydraulic:, Two platen, Shot size: 124.8 Oz, Screw diameter: 100 mm, Tie bar spacing: 46.45" x 39.37", Platen size: 61.42" x 59.84", Max. open daylight: 82.68", KEBA 2880 control., Machine is Sepro Robot., Under power and in excellent shape., Imperial Metric Tonnage 1,000 T ...more

, 2005 310 Ton Toshiba ISGS310W-V21-19:, Shot size: 41 Oz, Screw size: 70 mm, Tie bar spacing: 25.2" x 24", Platen size: 36.6" x 35.4", Max. Open daylight: 41.7", Control: Injectvisor V21, Weight: 27,300 lbs, Dimensions: 240" x 76" x 75", Still under power. Video available., Imperial Metric Tonnage 310 T 281.228 t ...more

, ***3 machines available***, 2021 309 Ton Nissei FNX280III-71A:, Hybrid Injection Molding machines, Shot size: 18.6 oz, Screw diameter: 56 mm, Tie bar spacing: 26” x 26”, Platen size: 37.6” x 37.6”, Max. daylight opening: 45.3”, Clamp stroke: 32.7”, Max. Injection pressure: 28440 ...more

, 2006 750 Ton Toyo Si-750III-M750U All Electric:, Shot size: 132.7 Oz, Screw diameter: 100 mm, Tie bar spacing: 45.08" x 45.08", Platen Size: 60.63" x 60.63", Control: PLCS-11, Hours: 56000, Machine is in good running conditions and under power., Imperial Metric Tonnage 750 T 680.389 t Shot Size 132.7 oz 3,762 g Year ...more

MAKE: MILACRON, MDL: MTS-310, YR: 2015, S/N: TB801DB010089, SHOT SIZE: 26.6 OZ., SCREW SIZE: 60MM, MAX INJECTION PRESSURE: 28100 PSO, PLATEN SIZE: 37" X 37", TIE BAR SPACING: 26" X 26", MAY DAYLIGHT: 53.5", MIN/MAX/MAX MOLD HEIGHT: 7.9" / 29.5", ELCTRICAL: 460V/3 PHASE/60 HZ, LOCATION: SANTA PAULA, CA, MACHINE DIMS: ...more

, 2023 600 Ton LS Mtron LSG-600H-i35a:, US Tonnage: 606, Shot size: 60 Oz., Screw Diameter: 75 mm., Tie bar spacing: 36.6" x 36.1", Platen Size: 53.1" x 50.4", Max. Open daylight: 65", Control: KEBA 18.5" Touchscreen., Hours: only 65., Commissioned in 08/2025, Interface for valve gates (6), integrated hot runner ...more