1 - 50 of 56 listings
Cam-Wood #Cutmate-3400, Veneer Guillotine, 134" cut length, 4.7" daylight, 25.6" cut width, 5.91" beam width, 2.36" knife cylinder, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CUTMATE-3400
Year: 2026
CAM-WOOD CUTMATE 3400 Single Knife Guillotine suitable for veneer, paper, and plastics. -- Overall : Cutting Length: 3400 mm (134"); Daylight Opening: 120 mm (4.7"); Veneer Thickness of Single Sheet: Max. 0.1" (2.5 mm ) recommended use with 'TrimEasy' for more than 1.2 mm (0.047"); Cutting Width: 25 ~ 650 mm ...more
Cam-Wood #Cutmate-3400D, Double Knife Veneer Guillotine, 134" cut length, 3.15" daylight, 18.5" cut width, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CUTMATE-3400D
Year: 2026
CAM-WOOD (SAVI) CUTMATE 3400D Double Knife Guillotine.suitable for veneer, paper, and plastics. -- Overall : Cutting Length: 3400 mm (134"); Daylight Opening: 80 mm (3.15"); Veneer Thickness of Single Sheet: Max. 0.1" (2.5 mm ) recommended use with TrimEasy for more than 1.2 mm (0.047"); Cutting Width: 30 - 470 mm ...more
Cam-Wood #Cutmate-4000D, Double Knife Veneer Guillotine, 134" cut length, 3.15" daylight, 18.5" cut width, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CUTMATE-4000D
Year: 2026
CAM-WOOD (SAVI) CUTMATE 4000D Double Knife Guillotine suitable for veneer, paper and plastics. -- Overall : Cutting Length: 4000 mm (157.4"); Daylight Opening: 80 mm (3.15"); Veneer Thickness of Single Sheet: Max. 0.059" (1.5 mm ) recommended use with TrimEasy for more than 1.2 mm (0.047"); Cutting Width: 30 - 470 mm ...more
Cam-Wood #Cutmate-4000D, Veneer Guillotine, 157.5" cut L, 4.7" daylight, 25.6" cut width, 5.91" beam width, 2.36" knife cylinders, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CUTMATE-4000D
Year: 2026
CAM-WOOD CUTMATE 4000X Single Knife Guillotine suitable for veneer, paper, and plastics. -- Overall : Cutting Length: 4,000 mm (157.4"); Daylight Opening: 120 mm (4.7"); Veneer Thickness of Single Sheet: Max. 0.059" (1.5 mm ) recommended use with 'TrimEasy' for more than 1.2 mm (0.047"); Cutting Width: 25 ~ ...more
Cam-Wood #Cutmate-700C, cross-grain veneer clipper, 27.55" cutting capacity, 2025, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CUTMATE-700C
Year: 2026
CAM-WOOD CUTMATE 700C Cross-Cut Veneer Clipper.: -- Cutting Width 700 mm (27.55"). -- Daylight Opening 80 mm (315") -- Electric Power approx. 4.7 kW -- Dimensions (L x W x H) 1200 x 1800 x 1500 mm ( 48 x 71 x 60"). -- Net Weight approx. 650 Kg. (1,450 Lbs). -- Green-line cutting guide lights. -- Green-line cutting ...more
Get email updates for newly added Wood Veneer Machines
Wood veneer machines handle the cutting, applying, and pressing of thin wood sheets onto surfaces like MDF or plywood, making them key for quality furniture and decorative finishes. Machines include slicers, guillotines, and splicers, some with automated gluing and feeding for smooth veneer application.
Cam-Wood #ERD-2800, veneer edge reinforcing, 23.6-110" L, 0.012-0.079 thick, w/ warranty, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ERD-2800
Year: 2026
CAM-WOOD/INNOVATOR ERD 2800 Edge Reinforcing Machine. Tape veneer sheets up with paper and simultaneously cut off the waste as the final step. Adjustable width of trimming heads to fit the size of veneer faces as required. Device uses tape to effectively keeps the edges of veneer faces from splitting while being ...more
Cam-Wood #ERD-3400, veneer edge reinforcing, 43.3-133.9" L, 0.012-0.079 thick, w/ warranty, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ERD-3400
Year: 2026
CAM-WOOD/INNOVATOR ERD 3400 Edge Reinforcing Machine. Tape veneer sheets up with paper and simultaneously cut off the waste as the final step. Adjustable width of trimming heads to fit the size of veneer faces as required. Device uses tape to effectively keeps the edges of veneer faces from splitting while being ...more
Cam-Wood #ERD-4000, veneer edge reinforcing machine, 157.5" veneer face length, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ERD-4000
Year: 2026
CAM-WOOD/INNOVATOR ERD 4000 Edge Reinforcing Machine. Tape veneer sheets up with paper and simultaneously cut off the waste as the final step. Adjustable width of trimming heads to fit the size of veneer faces as required. Device uses tape to effectively keeps the edges of veneer faces from splitting while being ...more
Cam-Wood #FanningMate, Veneer Fanning Machine, 25.6" width x 0.32"-0.79" thick Veneer Bundle size, 56 FPM, 1.33 HP, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: FANNINGMATE
Year: 2026
CAM-WOOD/INNOVATOR- FANNINGMATE Veneer Fanning Machine. Designed to fan pre-glued veneer bundles. Unlike manual fanning, this fanning machineoffers a solution to avoid the pre-glued veneers from sticking together. This can also avoid time consuming and imprecise manual fanning process, especially for long veneer ...more
Cam-Wood #G1, Longitudinal Veneer Splicer, .059" thick, 13-3/4" min. L, 1.57" min. width, 212 - 428 deg.F, 47.2" heating zone, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: G1
Year: 2026
CAM-WOOD 'VENEER PLUS G1' Longitudinal Veneer Splicer with integral glue applicator. -- : Feed thru splicer with integrated glue applicator. With cooling system to increase glue life. Joins veneer edges passing through a UREA or PVAC "disc style" glue application zone at high speed for an immediate tight joint ...more
Cam-Wood #G2, Longitudinal Veneer Splicer, .197" thick, 13-3/4" min. L, 2.17" min. width, 212 - 428 deg.F, 59.1" heating zone, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: G2
Year: 2026
CAM-WOOD 'VENEERPLUS G2' Longitudinal Veneer Splicer with integral Glue Applicator for Thicker Veneer. Handles Thicker Veneer - 0.5 mm to 5 mm (0.02 - 0.197"). -- : Feed thru splicer with integrated glue applicator, glue with cooling system to increase glue life, joins veneer edges passing through a "disc ...more
Cam-Wood #GLUEMATE-700, veneer glue applicator, double side, infeed roller, w/ warranty, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: GLUEMATE-700
Year: 2026
CAM-WOOD/INNOVATOR GLUEMATE 700 Double Sided (Edges) Veneer Glue Applicator. Ensures precise application of adhesive to both edges of veneer bundles avoiding airborne contaminants and operation inconvenience. Works with both Urea based or PVAc glue. Consists of a rigid welded steel body and two glue-pots for precise ...more
Cam-Wood #M1, Longitudinal Veneer Splicer, .06" thick, 7.87" min. L, 2.16" min. width, 212 - 428 deg.F, 31.5" heating zone, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: M1
Year: 2026
CAM-WOOD VENEERSOLID M1 Longitudinal Splicer for Pre-Glued Veneers. : -- Feed thru splicer for joining pre-glued veneer panels with UREA or PVAC glue for an immediate tight joint. Suitable for splicing short veneer strips. Model is a perfect entry-level splicer for custom shops with lighter needs. Also capable of ...more
Cam-Wood #M2L, Longitudinal Veneer Splicer, .197" thick, 13.8" min. L, 2.16" min. width, 212 - 428 deg.F, 31.5" heating zone, 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: M2L
Year: 2026
CAM-WOOD VENEERMATE M2L' Longitudinal Splicer for Pre-Glued Veneers. for veneers up to 0.5 - 5 mm (0.02 - 0.2" thick. -- : Feed thru splicer for joining pre-glued veneer panels with UREA or PVAC glue for an immediate tight joint. Suitable for splicing high quality glued-spliced veneer faces. Particularly suitable ...more
Cam-Wood #Optimum-3400, automatic double knife guillotine w/ glue system, Mitsubishi PLC Control, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: OPTIMUM-3400
Year: 2026
CAM-WOOD/INNOVATOR OPTIMUM 3400X Automatic Double Knife Guillotine with Gluing System. The veneer bundle is cut and glued while the whole veneer bundle is fully pressed (the pack beam does not rise) for accurate linear cutting and gluing effects. Fully overcomes the problems that thick glue spills on the surface of ...more
Cam-Wood #SVFPL-A, Smart Veneer Faces Production Line, option A, 157.48" cut length, w/ warranty, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SVFPL-A
Year: 2026
CAM-WOOD/INNOVATOR- Taiwan INNOVATOR’s SVFPL -A, Smart Veneer Faces Production Line. Option A Line designed for automated production of our customer not only reduces labor costs but minimizes the breakage of veneer faces by manual carrying. The line brings a typical eight to ten person process down to just two ...more
Cam-Wood #SVFPL-C, smart veneer faces production line, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SVFPL-C
Year: 2026
CAM-WOOD / INNOVATOR- Taiwan INNOVATOR’s SVFPL-C, Smart Veneer Faces Production Line. Option A with Edge Reinforcing Package = Option C.Line designed for automated production of our customer not only reduces labor costs but minimizes the breakage of veneer faces by manual carrying. The line brings a typical ...more
Cam-Wood #SVFPL-D, Smart Veneer Faces Production Line, 133.9"/157.5" Veneer Cut lengths, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SVFPL-D
Year: 2026
CAM-WOOD/INNOVATOR- Taiwan INNOVATOR’s SVFPL - D Smart Veneer Faces Production Line. Option B but 3400 mm - with 4,000 mm Cut Length + Edge Reinforcing Device (ERD) - 4000mm = Option DLine designed for automated production of our customer not only reduces labor costs but minimizes the breakage of veneer faces by ...more
Cam-Wood #Ultimate-3400X, Crossfeed Veneer Splicer, 17.7"-134" strip L, 2.95" min strip width, 0.012"-0.138" strip thickness, 15-20 cycles/min., 2026, new
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ULTIMATE-3400X
Year: 2026
CAM-WOOD ULTIMATE 3400X Crossfeed Veneer Splicer. : ULTIMATE crossfeed splicer is designed for a glue-spliced joint for long and panel-sized veneer faces. (Veneer bundles must be well-cut straight with double knife guillotines and then pre-glued on the edges as preparation).Pre-glued veneer strips are fed into the ...more
Cam-Wood #Ultimate-4000X, crossfeed veneer splicer, Mitsubishi PLC
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ULTIMATE-4000X
Year: 2026
CAM-WOOD ULTIMATE 4000X Crossfeed Veneer Splicer. : ULTIMATE crossfeed splicer is designed for a glue-spliced joint for long and panel-sized veneer faces. (Veneer bundles must be well-cut straight with double knife guillotines and then pre-glued on the edges as preparation).Pre-glued veneer strips are fed into the ...more
Cargate D-860, Venner Lathe, 8'-6" L x 5' diameter log, 4" inner spindle, 8" & 11" outer, 5' wheel, 6-knife, 1967
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cargate
Model: D-860
Year: 1967
CARGATE D-860 Rotary Veneer Lathe, Heavy Duty: -- Built specifically to handle large-diameter logs as well as small logs. It has a log length capacity of an easy 8'-6" and a diameter capacity of up to 5', peeling down to perfect 4" cores for optimal log utilization. -- This moneymaker looks like a big brother ...more
Coe Press Equipment #233, Rotary Veneer Lathe, 30" Swing, 44" Knife Length, 50 HP, 230/460 V
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Coe Press Equipment
Model: 233
COE 233 Rotary Veneer Lathe. -- 30" Swing and 44" Knife length., -- Turning motor LINCOLN 50 HP 230/460 -- Complete with: Hydraulic unit, all drive motors and controls. -- Includes: veneer knife. - Ideal for peeling short blocks.
Coe Press Equipment 249D, Rotary Veneer Lathe, 27" log diameter, 110" knife length, 3 to 1 inner drive ratio, 35 cu.m/hr peeling
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Coe Press Equipment
Model: 249D
COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, Approx.110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling approx. 35 cubic meters per hour. -- Includes: Linden step feeder Small log offset x-y spindle chucks 27"; ...more
JUST ADDED!
Coe Press Equipment Veneer Drying Ovens
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Coe Press Equipment
Model: VENEER DRYING OVENS
Two COE Drying ovens, - COE M72: 18-Heating sections and t-cooling sections, - COE M62: 16 Heated sections and 3-cooling sections, - Driven by COE 4-deck gear towers, - Merger conveyor on outfeed with apron belts feeding COE 8-bin dry stacker.
Fezer A#JAT-21MF, Cross Feed Veneer Splicer, 1987
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fezer
Model: JAT-21MF
Year: 1987
There are (4) machines at this facility. Two are used in production and the other two are in storage. 87" Capacity.
Fischer & Ruckle #Omnimaster plus veneer splicer, continuously feed, cooling device, edge gluing
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fischer & Ruckle
Model: OMNIMASTER
Technical [Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm, Veneer thickness min0,4 mm, Veneer thickness max1,5 mm, Strip width min45 mm, Strip width max1.200 mm, Feedrate max50 m/min, Continuously variable feed, Cooling device, Gluing aggregate, Edge gluing, JointOnly edge gluing ...more
Fisher + Ruckle #FZK, Veneer Longitudinal Splicer
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fisher
Model: FZK
Fisher + Ruckle Veneer Longitudinal Splicer FZK, Good Condition, Runs Well.
Fisher+Ruckle #FZL-34-Delta, Crossfeed Veneer Splicer, 19.7" - 133.8" strip L, 1.97"-23.6" strip width, 0.236" thickness, 30 joints/min. feed rate, 3-Ph.
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Fisher&ruckle
Model: FZL-34-DELTA
FISHER+RUCKLE/M+S BRUGG - FZL-34 Crossfeed: SplicerHigh Production Line for preglued veneers. -- Size : Veneer strip lengths (grain direction): 500 – 3,400 mm (19.7" - 133.8"); Veneer strips width (cross grain direction): 50 – 600 mm (1.97" - 23.6"); Veneer thickness: 0.4 - 6 mm Depends on veneer quality. ...more
Fisher & Ruckle Fisher+Ruckle #FZR-15, Crossfeed Splicing Machine, 59" L x 19.6" width x 0.059" thick max Veneer Strip Size, 60" L Heating Zone, 2023
RT Machine | Hughesville, PA
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fisher&ruckle
Model: FZR-15
Year: 2023
Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Effective Length of Heating Zone 1536mm ( 60") Throughput Speed 33m/min. (108 Ft/Min) Maximum Nominal Output / Machine Cycles - 30 Cycles/min Average Production Speed is 17-20 Cycles/min (Based on Average Veneer Strip Width of 100mm, Cross Grain) Veneer Strip ...more
Fisher & Ruckle Fisher+Ruckle #Impetum-1200, Longitudinal Veneer Splicer, 47.2" width x 149.6" L x 0.1" thick max Veneer Strip Size, 46.8" Heating Area, 400 V, 2021
RT Machine | Hughesville, PA
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fisher&ruckle
Model: IMPETUM-1200
Year: 2021
Fisher & Ruckle Model Impetum 1200 Longitudinal Veneer Splicer Feed speed: 5- 40 m/min Production Speed w/0.6mm Veneer: 20-30 m/min Heating Area: 1190 mm @ 200C Veneer : Veneer Strip Width: 35-1200mm Veneer Strip Length: 380-3800mm 3mm Thickness Capacity Foot Pedal Remote Integrated Glue Pot Chilling Unit Memory ...more
JUST ADDED!
Globe Plywood Layup Line and Globe Press
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Globe
Model: PLYWOOD LAYUP LINE AND GLOBE PRESS
Globe Manual Layup Line, - Koch Glue Head, - Automatic face sheet layer, - Tranter Super Charger Heat Exhchanger, Globe Press Line, - Pre Press, - 40-Opening Claude White Press, - Spartek Manual Loader, - Spartek Unloader, - Spartek Corners, - Super nuts on press, - Hydraulic system: Panel Machinery, Claude White ...more
Kuper #ACR1600, Crossfeed Veneer Splicing Line, 63" max. width, 0.3-2.5 mm veneer thickness, 98 FPM, Siemens Simatic controls, 400 Volt, 2007
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: ACR 1600
Year: 2007
KUPER ACR 1600 Cross-Feed Veneer Splicer for Pre-Glued Veneer. Throughfeed cross splicing machine for pre-glued veneer strips with a small working width. Crosswise operation works much faster and requires less handling than longitudinal machines, making it an economicalalternative for cross-veneered interior doors or ...more
Kuper #FL/Innovation-1000, Longitudinal Veneer Splicer, 39.4" Throat, 0.3-2.5 mm Thick, 12-55 m/min, 11.8 kW, 400 V., New, 2025
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: FL/INNOVATION-1000
Year: 2025
KUPER FL/INNOVATION 1000 VENEER SPLICER. Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional- see below)./Technical Data*. -- Throat depth: 1,000 mm (39.4"). Lenfth of heating section ...more
Kuper FW-1150, Zig-Zag Veneer Stitcher, 0.188" thickness, 45.25" throat depth, 98 FPM, 59" x 25" table, 1995
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: FW 1150
Year: 1995
KUPER - FW 1150,.Zig-Zag Veneer Stitcher -- Stitches veneers: 0.4 - 3 mm (0.015" - 0.118") thickness. -- 1.150 mm (45-1/4") Throat depth; variable feed speed from 10 - 30 MPM (33 - 98 FPM); 0.55 kW feed motor; table size 1,500 x 650 mm (59" x 25"). -- Built-in hot air heating tube: Special KUPER glue/thread is joining ...more
Marunaka RD-8J-Wide, Veneer Roller Dryer, 51" working width, 24' (4 Sec.) dryer length, steam heating, 2003
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marunaka
Model: RD 8J WIDE
Year: 1988
MARUNAKA Model RD – 8J WIDE Single Deck Veneer Roll Dryer;Complete with the following s: -- 1988 - year of manufacture. --Working width – 51"; --Length of the dryer – 24 Ft (4 Sections) --Type of heating - Steam --Operational in 2018 when mill closed --Professional rigging and loading available.
Marunaka RD-3UB, Veneer Roller Dryer, 39" working width, (3) 3 HP circulating fan, (1) 3 HP exhaust, (7) zones, 250 deg F, 1983
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marunaka
Model: RD-3UB
Year: 1983
MARUNAKA Model RD-3UB/RD-6UB (Connected) Single Deck Veneer Roll Dryer;Complete with the following s: -- (3) 3 HP circulating fans with (1) 3 HP exhaust blower thru the ceiling. -- Optional heat source: electric (7) Elements/Zones, computer controlled thermocouples in addition to (2) Natural gas burners (OEM). Both ...more
Monguzzi #4000, Veneer Guillotine, 157" cut L, 3.1" daylight, 50" Capacity, 1992
RT Machine | Hughesville, PA
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Monguzzi
Model: 4000
Year: 1992
Monguzzi Model TRA 4000 Veneer Guillotine Max. Cutting Length: 157” (4000mm) Press Daylight: 80mm Adjustable Rear Fence 50” Capacity Push-Button Controls Serial #: 0311992 Current Voltage: 440v.
Monguzzi / Fisher Ruckle #Alos/AFH-34, veneer guillotine w/ internal milling & glue applicator
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Monguzzi
Model: ALOS/AFH-34
Year: 2007
FISHER+RUCKLE/MONGUZZI ALOS/AFM 34 Veneer Guillotine with integral Milling & Glung units for butt jointing veneer. After Guillotine cut of vener bundle, the edge is jointed with a Milling Router and glue is applied while bundle is pressed for subsequent splicing. Ideal for medium production. -- Veneer thickness ...more
Monguzzi #TRA-3600, single knife guillotine, 141" work length, 2.56" opening, 3/4"-43" parallel fence, 10 HP, 2001
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Monguzzi
Model: TRA-3600
Year: 1997
MONGUZZI TRA-OLS-3600 Single Knife Guillotine. --141" (3600 mm)Working. length cap., 2.56" (65 mm) opening, -- Hydraulic pressure beam with gear pump, electric brake motor for knife cutting operation, approx. 2 Sec cycle time per cut, -- 10 HP (7.5 KW) Hydraulic Pump motor. -- Motorized parallel fence adjustable from ...more
Monguzzi / Fisher Ruckle #TRM-2L-3600, double knife veneer guillotine, 161.4" knife length, Siemens controller, 1997
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Monguzzi
Model: TRM-2L-3600
Year: 1997
MONGUZZI/FISHER RUCKLE - TRM 2L- 4000: Double-Knife Veneer Guillotine. Will be sold: Refurbished & with Upgraded PLC/Controls! -- 161.4" (4,100 mm) Max. nominal knife length, double-knife guillotine with: Motorized front knife adjustment. -- 0.393" - 20.27" (10 - 515 mm) Front to Back (material width) adjustment; ...more
Monguzzi/Fisher Ruckle#TRM-2L-4200, Double-Knife Veneer Guillotine, 171" max Cut length, 0.4"-20.5" Material Width, 3.93" Daylight Opening, 10 HP Pump
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Monguzzi/fisher Ruckle
Model: TRM 2L-4200
MONGUZZI/FISHER RUCKLE - TRM 2L - 4200: Double-Knife Veneer Guillotine. Totally refurbished & upgraded with latest generation CE standards. -- 171" (4,350 mm) Max. cut length; double knife Guillotine with: Motorized front knife adjustment. -- 0.393" - 20.47" (10 - 520 mm) Front to back (material width) adjustment; ...more
Northtech #Cutmate-4000D, Single Knife Veneer Guillotine, 157" L cut, 4,7" open, Mitsubishi PLC, new
RT Machine | Hughesville, PA
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: CUTMATE-4000D
Cutting Length : 4000 mm (157") Maximum Opening : 120 mm (4.7") Cutting width: 25 ~ 650mm (.98" - 25.6") Pack Beam Width: 150mm (5.9") Electric Power: Approx. 7.5kw 60 mm knife cylinder Green cutting indicator European safety standards Yuken hydraulic system Mitsubishi PLC control system Rigid welded machine body for ...more
Northtech #Innovator-Cutmate-4000D, Double Knife Veneer Guillotine, 157" L cut, 3.14" open, Mitsubishi PLC, new
RT Machine | Hughesville, PA
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: INNOVATOR-CUTMATE-4000D
Cutting Length : 4000 mm (157") Maximum Opening : 80 mm (3.14") Cutting width: 30~470mm (1.18" - 18.50") Dimensions of Guillotine: (L) 225" x (W) 71" x (H) 83" Dimensions of Hydraulic Tank: (L) 46" x (W) 22" x (H) 43" s Parallel cutting guaranteed JAPAN YUKEN hydraulic system With European safety standards Able to use ...more
Raimann ASA-1650, Veneer Patcher, 61" throat capacity, 3 HP gearmotor, (40) plugs/min., 1/32" - 1/5" (soft woods), 1/20" - 3/16" (hard woods), P-34 dies
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Raimann
Model: ASA-1650
RAIMANN Model ASA 1650 II, Veneer Patcher.: -- 5HP gearmotor, drive conversion wit new clutch and motor. Strip type mechanical plug-feeder mechanism - cap. of up to (40) Plugs/Min.; -- Thickness of veneer patchable 1/32" - 3/16" (0.8 mm - 4.76 mm). Profile P-34 dies in good condition. -- Table dimensions approx. 39" x ...more
JUST ADDED!
Raute #VO3, Veneer Core Composer, AS IS
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Raute
Model: VENEER CORE COMPOSER
Raute Model VO6 Veneer Core Composer, - Defect clipper, - Section to joins sections of veneer, - 5-Applicator wheels section for binding, - Stacker, - Discharge roll case, - 4' or 8' Material capacity.
Savi HFK-250, Veneer Guillotine, 102.4" Width capacity, 4" daylight opening, 4 HP hydraulic Unit
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Savi
Model: HFK-250
SAVI HFK-250 Veneer Guillotine; : -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motor powers hydraulic unit with reservoir. -- Originally fitted with motorized parallel fence with 0.5 HP two speed gearmotor drive, push button operated, adjustable from 1" - 50" ...more
JUST ADDED!
USNR Veneer Peeler and Stacker Green Line
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Usnr
Model: VENEER PEELER AND STACKER GREEN LINE
USNR complete log peeling and stacking green line, Premier Gear: Spindles, back up roll and carriage: (4-months old), Carriage has USNR Roller Bar (4-Months old), COE M765/M760 Chargers (4-months old and rebuilt), COE X/Y Charger, Red Scanner Boxes, Raute 3-Bin Stacker: 48" or 60" wide capacity x 8' long.
Vantec Tension Blade Rotarty Veneer Clipper, to clip 2800 mm veneer sheets into specific sheet sizes
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
The Vantec Automatic Rotary clipper is designed to clip 2800 mm veneer sheets into specific sheet sizes as per the auto stacker preselection. It comes with electronic drive panel, automatic gauge system, positioning of clipper knife by Servomotor and encoder. It is de- signed to work with one tensioned clipper knife ...more
Vantec 9' Veneer Lathe, designed to process veneer for plywood production
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
The Vantec 2800mm Spindleless Veneer Lathe is designed to process veneer for plywood production from both hard and soft logs. Its metal tempered grooved rollers and lathe knife inclination system work perfectly to make sure there will always be a precise contact area between the lathe knife and the log during the ...more
Vantec 9' Veneer Auto Stacker
Carolina Machinery Sales | Monroe, NC
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
The Vantec Veneer Auto Stacker, ELV 1.82B is a Vacuum stacker for 2800 mm Veneer lathe. It is fitted with double stacking system (04 bins), with four veneer transport lines and four 5hp exhausters. with of two stoppers and eight ejecting arms. With drive Panel, VSD for exhaust fans and hydraulics lifting tables., Min ...more
