101 - 200 of 341 listings
12" x 12" Cumberland #12X12, granulator, 20 HP, 3 knife open rotor, 2 bed knives, airveyor discharge
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 12X12
Used 12" x12" Cumberland Granulator, 20 Hp 3 Knife Open Rotor, 2 Bed Knifes, Has Front and Side Feed 1/4" Screen Airveyor Discharge 460 Volt Approximate Dimensions: 42" x 66" x 67" Machine Weight 1,400lbs.
12" x 12" Granutec #TFG1212, pull roll granulator, 3-knife open rotor, 2 bed knives, on casters
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1212
Used 12" x 12" Granutec TFG1212 Pull Roll Granulator Three Knife Open Rotor Two Bed Knives AC Pull Roll System With Drive Includes Blower On Casters Approximate Dimensions: 34" L x 30" W x 52" H.
12" x 12" Granutec #TFG1212, pull roll granulator, 3 knife open rotor, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1212
Used 12" x 12" Granutec TFG1212 Pull Roll Granulator Three Knife Open Rotor Two Bed Knives AC Pull Roll System With Drive Includes Blower On Casters S/N: 1962696 Approximate Dimensions: 34" L x 30" W x 52", 1,600 LBS.
12" x 12" Granutec #TFG1212, pull roll granulator, 3 knife open rotor, 2 bed knife, blower
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1212
Used 12" x 12" Granutec TFG1212 Pull Roll Granulator Three Knife Open Rotor Two Bed Knives AC Pull Roll System With Drive Includes Blower On Casters S/N: 8962851 Approximate Dimensions: 34" L x 30" W x 52", 1,500 LBS.
12" x 14" Conair #1412-201-02a Hushguard granulator, 10 HP, 1/4"screen
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Conair
Model: 1412-201-02A
Conair 1412-201-02A Hushgard Granulator #7229 #1, Main Motor: 10 HP, Voltage: 480/3/60, Screen: 1/4", Infeed: 12" W x 14" H, Blades are in good condition.
Get email updates for newly added Plastic Granulators and Pelletizer Machines
Plastic Granulators and Pelletizer Machines (also known as plastic shredders and pelletizing systems) are used to reduce plastic materials into smaller granules or pellets for reuse or further processing. Commonly used in recycling, manufacturing, and packaging industries, they are ideal for processing plastic waste, film, or extruded products. These machines are essential for efficient material recovery and ensuring consistency in plastic production.
12" x 15" Nelmor #RG1215M1, Granulator, 3-Blade Rotor, (2) Bed Knives, 58" Infeed height, 0.5" Screen, 20 HP, 1760 RPM, 460 V
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: RG1215M1
Used 12" x 15" Nelmor Model RG1215M1 Granulator, 20 HP 3 Blade Open Rotor, 2 Bed Knives, Tangential Cutterhouse 58" Infeed Height 1/2" Screen Installed Rotor Speed: 587 RPM 20 HP Baldor AC Motor, Cat. M2334T, Frame: 256T 460/3/60, 25A Motor RPM 1760 Belt-Driven Rotor By Motor, 3:1 Rotor Reduction S/N: 871126249 Three ...more
12" x 16" Ball & Jewell #CG-1216-PR, granulator w/ control panel, 15 HP
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Ball & Jewell
Model: CG-1216-PR
Used 12" x 16" Ball & Jewell Granulator w/ Control Panel, Model CG-1216-PR, 15 HP Pull Roll Granulator - In-Feed Can Be Cut To Fit Buyer's Profile Infeed Height: TBD 5/8" Screen 460/3/60 15 HP Delco, Model EG4104, AC Motor, S/N: D84 1775 RPM 460/3/60, 17.6 A Frame: 284U 4-Loadmatic System, 2 HP, S/N: ...more
12" x 16" Whittaker, granluator w/ belt conveyor
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brother
Used 12" x 16" Whitaker Granulator With Belt Conveyor 6" Wide Infeed x 30" Length 6 Knife Hog Style Rotor, 30 Hp Main Motor, Bin Discharge, 3/4" Screen 80" L x 42" W x 53" H In Stock, Test Run At Arlington, See Video.
12" x 17" Anderson Molds #812, plastic grinder/granulator, Carbon Steel construction, 3 HP
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Anderson Molds
Model: 812
Anderson Molds Plastic Grinder / Granulator, Model 812, carbon steel construction. Includes feed hopper measuring 28" x 18" x 36" with 12"x17" inlet, 8"x 12" throat, 5/16" diameter screen size openings, 9-Blade Cut, and bottom discharge. Driven by 3 HP, 208/230/460 Volt, 3/60 Hz, 1765 RPM motor. Serial number A577004. ...more
12" x 20" Cumberland granulator, sound enclosed, 20 HP, serial #293400-01507
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Model: 293400-01507
Used 12" x 20" Cumberland Granulator, Model: 12X20, Serial: 293400-01507, New: 2001, Driven by a 20 hp motor, 230 volt, 3 phase, 60 Hertz, Includes sound enclosure, 2001 CUMBERLAND 12" x 20".
12" x 20" Nelmor #1220RG, granulator, 15 HP, pull rolls, pneumatic roll pinch
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: 1220RG
Used 12" x 20" Nelmor Granulator, 15 HP ,Model 1220RG, With Pull Rolls Pneumatic Roll Pinch, 20" Wide, Has Standard Parts Chute Main Motor Start/ Blower Start/ And Control Techniques AC Drive, 2 HP Pull Roll With Heavy Duty Gearbox 3 HP Blower With 5" Discharge Pipe S/N 890829021 34 Amp Approximate Dimensions: 90" ...more
12" x 20" Nelmor #RG1220PI, granulator, sound enclosure, 10 HP, 1/4" screen, 3 knife closed rotor, bin discharge, profile chute
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: RG1220PI
Used 12" x 20" Nelmor Model RG1220PI Granulator with Sound Enclosure, 10 HP 1/4" Screen, 3 Knife Closed Rotor, Bin Discharge, Profile Chute 44" x 53" x 86" High, 73" Infeed Height.
12" x 20" Nelmor #RG1220PI, granulator, sound enclosure, 10 HP
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: RG1220PI
Used 12" x 20" Nelmor Open Rotor Granulator, Model RG1220P1 With A Regal Sound Supression Enclosure, 10 HP 74" Infeed Height 12" x 20" Cutting Chamber Open Rotor Style, 590 Rotor RPM 3 Fly Knives 2 Bed Knives S/N: 9704-37620 Bin Discharge 575 Average Throughput Per Manufacturer Approximate Dimensions: 54" L x 46" W x ...more
12" x 20" Nelmor #RG1220PI, granulator, sound enclosure, 10 HP
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: RG1220PI
Used 12" x 20" Nelmor Model RG1220PI Granulator with Sound Enclosure, 10 HP 3 Knife Closed Rotor Design Chute Style Infeed, 73" Infeed Height, 3/8" Screen With Bin Discharge 230 Volt S/N: 970437618 Approximate Dimensions: 44" x 53" x 86" High.
12" x 20" Nelmor granulator, heavy duty steel construction, 20 HP, 3 rotor knives, 2 fixed knives
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Nelmor
Per Factory Literature - May Vary:, Throat Size: 12" x 10", Rotor: Open, Motor Power: 20 HP 3/60/230v/460v Electric Motor (Granulator), Electrical Requirements: 460V (Control Panel), Rotor Knives: 3, adjustable and replaceable knives for precise cutting, Fixed Knives: 2, easily adjustable for optimal performance ...more
12" x 20" SEM #22, granualtor, closed rotor, 20 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Sem
Model: 22
are Approximate:, *Model 22, *Closed Rotor, 20HP Motor, Instruction Manual included.
12" x 21" Conair #CE1221, granulator w/ blower/cyclone, 3 knife staggered open rotor, 2 bed knives, 55" infeed height, 1998
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: CE1221
Year: 1998
Used 12" x 21" Conair Granulator, Model 1221, 50 HP 300–800 LBS/HR Material Dependant 8 Knife Staggered Open Rotor, 3 Bed Knives 1/4" Screen Size 84" Infeed Height 50 HP AC Motor 460/3/60, 63A Angled Infeed Chute w/ Safety Interlock Pneumatic Hopper Tilt Airveyor Discharge S/N: 50.2676 New In 1998 Spare 1/4" ...more
12" x 24" Conair #CK1224, Granulator, 3-Knife Open Rotor, 40 HP, 230/460 V
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Conair
Model: CK1224
Used Conair Granulator, type CK1224, 12" x 24" feed opening, 3 knife open rotor, driven by 40 hp, 230/460 volt motor, with screen holder.
12" x 24" Cumberland #684, granulator, 3 knife twin shear rotor, 2 bed knives, 80" infeed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 684
Used 12" x 24" Cumberland Granulator Model 684, 40 HP 3 Knife Twin Shear Rotor, 2 Bed Knives 80" Infeed Height Dual 6.5" x 11" Modified Cutouts, 72" Infeed Height Rotor Speed Approx. 1,025 RPM 40 HP TechTop AC Motor, Model: BL3-CI-TF-324TC-4-BR-D-40 460/3/60, 47.1A 324T Frame Insulation Class F 3/8" Screen 11" Driving ...more
12" x 24" Granutec #TFG1224, pull roll granulator, 20 HP, 3 knife open rotor, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1224
Used 12" x 24" Granutec TFG1224 Pull Roll Granulator, 20 HP Three Knife Open Rotor, Two Bed Knives 5/16" Screen 3/4 HP Pull Roll System With DC Drive 3 HP Blower With AC Drive On Casters S/N: 205.4091 Approximate Dimensions: 54" L x 46" W x 96" H.
12" x 24" Granutec #TFG1224, pull roll granulator, 30 HP Baldor motor, 3 knife open rotor, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1224
Used 12" x 24" Granutec TFG1224 Pull Roll Granulator 30 HP Baldor Motor Three Knife Open Rotor Two Bed Knives 5/16" Screen 1/2 HP DC Pull Roll System With Drive Blower With AC Variable Speed Drive On Casters S/N 411.496 Approximate Dimensions: 54" L x 46" W x 96" H.
12" x 29.5" Nelmor #G12295M1, granulator, 3 knife open rotor, 2 bed knives, 10 HP dual AC motors, 57" infeed height, 1745 RPM
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: G12295M1
Used 12" x 29.5" Nelmor Granulator, G12295M1 Dual 10 HP Motors 3 Knife Open Rotor, 2 Bed Knives 57" Infeed Height 1/4" Screen Size 10 HP Electric AC Motor, Model: 5K215BL2050, Frame 215T 460/3/60, 13.6A RPM 1745 10 HP Century AC Motor, Part: 9-390015-61, Frame 215T 460/3/60, 13.4A RPM 1735 Approximate Dimensions: 56" ...more
12" x 30" MPG #GP-1230HB, granulator, 20 HP, 3 knife open rotor, 2 bed knives, 59" infeed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Mpg
Model: GP-1230HB
Used 12" x 30" MPG Granulator, Model GP-1230HB, 20HP 3 Knife Open Rotor, 2 Bed Knives Need To Confirm Screen Infeed Height: 59" 20 HP AC Motor, 256T Frame Motor: 460/3/60, 22.7A 6" Airveyor Discharge Wiring & Controls For Blower Setup, **BLOWER NOT INCLUDED** Nameplate Electrical: 460/3/60, 27A New In 2000 ...more
12" x 56" AEC #WG1256, Plastic Granulator, 30 HP, Starter Panel w/ Controls, Refurbished
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Model: WG1256
Refurbished 12" x 56" AEC Paddle Feed Granulator, Model WG1256, 30hp 5 Knife TwinShear Rotor, 2 Bed Knives Approximately 2000 lbs/hr Per Manufacturer (Material & Screen Dependent) Infeed Height: 53" Screen Size: 3/8" 30 HP Teco Westinghouse AC Motor, Cat. No.: N0304, S/N: P6105417096 460/3/60, 34.5A 1755 RPM 286T ...more
Bay Plastics Mchy 12" Bay Plastics #AXP-12-WS, Strand Pelletizers
Rider Opportunity Group | Miami, FL
Seller: Rider Opportunity Group
Location: Nashville, TN
Mfr: Bay Plastics Mchy
Model: AXP-12-WS
Year: 2014
BPM Strand Pelletizer Model AXP 12 WS 2 Available, 12" Width, 60 strand capacity, Helical Cutting Rotor, 460 V, On Casters, BPM Pellet Cooling Table, Carter Day Spin Dryer - Dewater System, Model : J 12 Series Mfg 2013.
12.2" x 11.2" Scrap Grinder, 2" diameter Rotor, (3) 9.5" width knife blades, (2) 1/4" diameter & (1) 1/8" diameter Screen perforations, 3 HP, 220 V
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Scrap grinder with 12-1/4" X 11-1/4" feed opening to grinding chamber. Grinder includes 2 diameter rotor connected to (3) 9-1/2 wide knife blades. Top feed hopper is hinged in order to completely expose grinding chamber. Driven by 2.2 kW (3 HP), 220 V, 1720 RPM motor through V-belt drive. Includes (2) screens with ...more
Tria #900-NS-R, Pull Roll Granulator, 12.5" x 40" feed, 5-knife open rotor, 30 HP, 36" width, 480 V., 2004
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: 900-NS-R
Year: 2004
used tria model 900 ns-r pull roll granulator. 12.5" x 40" feed throat (1020mm x 320mm). five (5) knife open rotor with two (2) bed knives. rotor is belt driven by a 22 kw (30 hp). feed hopper with rear mounted 36" wide steel / serrated pull rolls. air actuated feed rolls are powered by a 1 kw (1.5 hp) a/c motor. 9" x ...more
13" x 28" LR Systems, granulator mounted on mobile base, 30 HP, includes blower discharge, 1999
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lr Systems
Year: 1999
Used 30 HP 18" x 28" LR Systems Granulator, Manufacturer: LR Systems, Model: SG500/BD-18, Year: 1999, 18" x 28" feed throat with 2-knife open rotor, Driven by a 30 hp motor, Additional information: includes blower discharge, sound deadened tray feed hopper, mounted on mobile base,with operator controls and starter,f ...more
14" x 6" Van Dorn #G-200, Plastic Grinder/Granulator, 6.5" x 6.5" chamber w/14" x 6" feed throat, (3) rotating & (2) stationary blades, 2 HP, 1140 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Van Dorn
Model: G-200
Van Dorn Model G-200 plastic grinder / granulator, mild steel construction. Chamber measures 6-1/2" X 6-1/2" with 14" x 6" feed throat. Includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. Driven by 2 HP, 230/460 volts, 3-phase, 60 Hz, 1140 RPM motor. ...more
14" x 6" Van Dorn #G-200, Plastic Grinder/Granulator, 6.5" x 6.5" chamber, 3 rotating & 2 stationary blades, 2 HP, 1140 RPM, 230/460 V., frame w/ casters
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Van Dorn
Model: G-200
used- van dorn model g-200 plastic grinder / granulator. mild steel construction. chamber measures 6-1/2" x 6-1/2" with 14" x 6" feed throat. includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. driven by 2 hp, 230/460 volts, 3-phase, 60 hz, 1140 rpm motor. ...more
14" x 9" MPG Plastic #MP1114, granulator, 5 HP, reconditioned
Breakthru Surplus | Waukesha, WI
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Mpg
Model: MP1114
MPG Plastic Granulator - MP1114, 5hp, 230V 15A, 3 phase, 60hz, Grinding area:, 14" x 9", replaceable screens for controlling the size of the ganules produced, with common sizes including 1/4", 3/16", etc.
14" x 14" Nissui #SA-35, slow speed plastic granulator, 3 HP, 2" suction discharge
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nissui
Model: SA-35
Used 16" x 16" Nissui SA-35 plastic granulator Top Fed, Slow Speed Granulator 2.2KW Motor With Gearbox, 2" Suction Discharge 460 Volt New in 2000 S/N SA3500572 Approximate Dimensions:33" x 45" x 69" 1,300 Lbs.
14" x 16" Cumberland, plastic granulator, 16.5" cut circle diameter, 5/16" holes screen, #18791
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cumberland
Year: 1997
SERIAL NUMBER. 21230-6779, FOR USE IN RECLAIMING PARTS, RUNNERS, FILM, LIGHT SHEET &, SMALL DIAMETER PIPE (PLASTIC), CUTTING CIRCLE DIAMETER. 16.5", SCREEN. 5/16" HOLES, THROUGHPUT UP TO. 700 LBS/HR APPROX., BOTTOM OPENING. 10" X 11", STATIONARY KNIVES. (2) ADJUSTABLE HIGH CARBON, STEEL REVERSIBLE W/(4) CUTTING ...more
14" x 18" Conair #CK1418, granulator, 15 HP motor, 3 knife open rotor, 2 bed knives, 52" in-feed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: CK-1418
Used 14" x 18" Conair Granulator, Model CK1418 3 Knife Open Rotor, 2 Bed Knives 15 HP Motor Tangential Cutting Chamber 1/4" Screen Size 52" In-Feed Height S/N: 400.66 New in 1998 Approximate Dimensions: 63" L x 52" W x 73" H, 1,700 LBS.
14" x 18" Rapid #1418, granulator, 25 HP, 3 knife open rotor, 2 bed knives, 52" in-feed height, 1998
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rapid
Model: 1418
Year: 1998
14" x 18" Rapid Granulator, Model 1418, 25 HP Three Knife Open Rotor, 2 Bed Knives NEW WEG 25 HP Motor and NEW Starter Box Air-Veyor Discharge 56" In-Feed Height 460/3/60 New In 1998 Approximate Dimensions 50" L x 40" W x 70" H.
Cumberland #584, Industrial Plastic Granulator, 14" x 20" feed throat, 3 rotor, 20 HP, 230/460 V., control panel
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cumberland
Model: 584
used- cumberland granulator, model 584. 14" x 20" feed throat. (3) knife open rotor, (2) bed knives. driven by a 20hp, 3/60/230/460 volt, 1755 rpm motor. set up for bottom blower discharge. hopper with custom front sheet feed, side gravity feed. bottoms screen with 1/4" diameter holes. includes control panel and spare ...more
14" x 24" Conair #CGW-1424, granulator, 5 blade, 40 HP, 2019
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Conair
Model: CGW-1424
Year: 2019
Model: CGW-1424, Hp: 40, Rotor Style: 5 Blade, Processing Capacity: 14" x 24" Feed Throat, Voltage: 460.
14" x 24" Nelmor #G1424, Granulator, 2 Bed Knives, 85" Infeed height, 34.5" Discharge height, 40 HP, 460 V
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: 1424
Used 14" x 24" Nelmor Granulator, Model G1424, 40HP Two Knife Open Rotor 2 Bed Knives 5/16" Screen 85" Infeed Height, 34.5" Discharge Height Discharge Chute Dimensions 14" L x 7.5" W Discharging Into Bin With 2" Vacuum Takeoff On The Bottom 40 HP Lincoln AC Motor, 324T Frame, 460/3/60, 51A 1765 RPM, Service Factor ...more
Security Engineering 14" x 24" Security Engineered Machinery #1424, granulators, 60 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Security Engineering
Model: 1424
This extra heavy duty SEM disintegrator can easily destroy bound manuals and printouts from 4″ to 6″ thick. These systems are very popular with large Military Bases and Data Processing Centers., SEM SECURITY ENGINEERED MACHINERY 1424, Per Factory Literature:, Media Accepted: Paper, optical, small e-media ...more
14" x 26" Cumberland #684 3KN granulator, 3 fly/2 bed knives, open rotor, 25 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 684
25HP 3/60/460 Volt Electric Motor, 3 Fly / 2 Bed Knives, Open Rotor, 14" x 26" Approximate Feed Opening.
14" x 28" Battenfeld Gloucester #1428HD, granulator, 200 HP, 3 knife rotor, 1994
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Model: 1428HD
Year: 1994
200hp Battenfeld Gloucester Granulator, 14” x 28” Throat opening, Three knife open rotor with slant cut is belt driven by a 200 HP Motor, Feed hopper modified for conveyor feed and Includes pull rolls on the back of the hopper., Includes 7.5 hp blower for material discharge., MFD 1994., 460/3/60, 228 FLA ...more
14" x 36" SEM, extra heavy duty high volumn disintegrator granulator, 3 fly & 2 bed knives, 75 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Sem
14" x 36" Feed Opening, 3 Fly & 2 Bed Knives, 75 HP, Weight: 6,200 lbs., SEM SECURITY ENGINEERED MACHINERY 1436, These SEM Disintegrators (Models 1436 and 1436/5) have been evaluated by NSA and with the standard 3/32″ screen and are listed on the NSA/CSS EPL for Paper Disintegrators, CDs, and Key Tape. ...more
14" x 56" Cumberland #1456, granulator w/feed rolls, 3 knife chevron cut rotor, 75 HP
Blades Machinery Co Inc | Elk Grove Village, IL
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Cumberland
Model: 1456
14" x 56" Cumberland #1456, pull-roll granulator, 75 HP TECO Westinghouse motor, 3 knife open rotor, 2 bed knives, 8" air-veyor discharge, 2021
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 1456
Year: 2021
14" x 56" Cumberland Pull Roll Granulator Model 1456 3 Knife Open Rotor, 2 Bed Knives 3/8" Screen 70" In-Feed Height On Pull Roll Side 60" In-Feed Height On Backside With 30" x 12" Feed Slot 8" Air-Veyor Discharge S/N 84000-20002 Pull Rolls Driven By 3 HP Baldor AC Motor 75 HP TECO Westinghouse Motor, 1190 RPM ...more
14" x 56" Cumberland #1456I, pull-roll granulator, 100 HP WEG Inverter Duty Motor, 3 knife open rotor, 2 bed knives, 58.5" in-feed height, 8" air-veyor discharge
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 1456I
14"" x 56" Cumberland Pull Roll Granulator Model 1456I 3 Knife Open Rotor, 2 Bed Knives 3/8" Screen 58.5" In-Feed Height 8" Air-Veyor Discharge S/N 84000-83004 Pull Rolls Driven By 2 HP Baldor DC Motor Through Boston Gear Right Angle Gearbox And Chain Drive 100 HP WEG Inverter Duty Motor, 1190 RPM, New IN 2013 ...more
15" x 13" Nelmor #G1215P1, plastic granulator, reconditioned
Breakthru Surplus | Waukesha, WI
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Nelmor
Model: G1215P1
G1215P1 480V 30A 3 Phase Approx Opening Size: 15inch x 13inch Approx Overall Size: 70inch Tall x 42inch Long x 42inch Wide.
15" x 15.7" Nissui #SKN-22, slow speed granulator, 3 HP, 1993
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nissui
Model: SKN-22
Year: 1993
Used 15" x 15.75" Nissui Slow Speed Granulator, Model SKN-22, 3 Hp Top Feed, 2.2kw Motor With Gearbox, On Casters Approximate Overall Dimensions: 47" x 41" x 80" S/N: S22214, New 1993 460/60/3 MACHINE HAS BEEN TEST RUN AT ARLINGTON - SEE VIDEO.
15" x 15.7" Nissui #SKN-22, slow speed granulator, 3 HP
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nissui
Model: SKN22
Used 15" x 15.75" Nissui Slow Speed Granulator, Model SKN-22, 3 Hp Top Feed, 2.2kw Motor With Gearbox, On Casters Overall Height 47" x 41" x 68" S/N: 825545 460/60/3 MACHINE HAS BEEN TEST RUN AT ARLINGTON - SEE VIDEO.
15" x 18" Sprout Bauer #DSF1518, Granulator, 7-Knife Rotor, (2) Bed Knife, 5" x 18" Hopper, 30 HP, 460 V
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sprout Bauer
Model: DSF1518
Andritz Sprout-Bauer Model DSF1518 granulator, 7-knife rotor, 2 bed knife, 30 HP 460 volt only motor, belt drive, 5" X 18" blow-in in-feed hopper, vacuum take-off discharge, mounted on a short leg base, no starter/controls designed for film granulation (3 available). Previously used for recycling polyester film edge ...more
15" x 20" Nelmor #RG1220M1, granulator, 20 HP, 3 fly/2 bed, closed rotor, 2.5" outlet
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Nelmor
Model: RG1220M1
Model: RG1220M1, Motor Hp: 20, Feedthroat In: 15H x 20W, Outlet Dia In: 2.5, Blade Configuration: 3 Fly / 2 Bed, Closed Rotor, Screen Hole Dia In: 9/16, Voltage: 480/3.
JUST ADDED!
15" x 26" Polymer Systems, granulator, 75 HP, Control panel
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polymer Systems
15" x 26" Polymer Systems Granulator, 75 HP Control Panel Includes Box Dumper, In-Feed Conveyor, Blower, And Cyclone Currently Installed And Running In New York.
Herbold Granulator. 15.5" x 15.5" feed opening, 40 HP, 575 V., Control panel,
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Herbold
used- herbold granulator. 15.5" x 15.5" feed opening; (3) complete sets of (9) blades w/ (17) spares; 3 complete sets of (2) counter blades w/ (5) spares; 6mm and 9.5mm screens. approx. oad: 8.9' l x 5.3' w x 7.3' h. driven by a 40 hp, 3/60/575v motor. with control panel. previously used for plastic. our ...more
16" x 12" Ringmill, Stainless Steel, 20 HP Baldor motor, 1.915:1 drive ratio, #19186A
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Ring Mill
Model: 1612RIGIMILL
Used 16" x 12" Ringmill, 20 Hp Stainless Steel 304 At Product Contact 120 Grit finish, 20 Hp Baldor Motor, 1.915:1 Drive Ratio, 939 Rotor RPM Hammer Tip Speed 3933 fpm 3/32 Diameter Screen, Double 1/4 Blunt Hammer Design, Dimensions: 50" Wide x 86" Deep, 110" Top Of Hopper Approximate Overall Weight : 2,000.
16" x 16" Granutec #TFG1616HD40, granulator, 40 HP, Air-Veyor discharge, #8791
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1616HD40
Used 16" x 16" Granutec Granulator, Model, TFG1616HD40, 40HP Motor, 50 Amps, 3 Knife Open Rotor 2 Bed knives, 3/8" Screen, Tangential Feed, Slant Cut, 4" Air-Veyor Discharge S/N 3962755, New In 1996. Max throughput-1,000 lbs/hr. Machine has been tested. Includes NEW WEG starter. Machine Dimensions: 60" x 38" x 65" ...more
16" x 16" LR Systems #SG400, Granulator, 48" O.D. x 76" straight side Hopper, 25 HP, On Portable Base, 1996
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lr Systems
Model: SG400
Year: 1996
Used LR Systems Granulator. Model SG400, Serial #6557, new 1996. Has 16" X 16" throat opening. Driven by an approximately 25 HP motor. Includes motor starter and 5 HP blower for discharge. Also includes oversized hopper for accepting air conveyed scrap bottles, 48" O.D. X 76" straight side. Grinder and oversized ...more
JUST ADDED!
16" x 20" AEC, Nelmor #G1620, granulator, 30 HP, 1755 RPM, 3 rotating & 2 bed knives, refurbished
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Aec
Model: G1620
Model: G1620, Hp: 30, Rpm: 1,755, Voltage: 480/3/60, Amps: 37 FLA, Screen Hole Size: 5/16", Cutting Chamber Width In: 27", Cutting Chamber Height In: 20", Feed Throat Width: 20", Feed Throat Height: 16", Blade Configuration: 3 Rotating Knives - 2 Bed Knives.
JUST ADDED!
16" x 20" Nelmor #G1220M1, Industrial Plastic Granulator, 25 HP, 230 V
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nelmor
Model: G1220M1
NELMOR - G1220M1: Industrial Plastic GranulatorNELMOR Model "G1220M1" Industrial Plastic Granulator in "excellent" working condition: Clean solid machine that runs great & is ready for production. -- 25 HP Main motor. -- 20" x 16" feeder opening. -- 230 V / 3 Phase power. -- : Dura Pulse variable frequency drive ...more
16" x 24" Granutec #TFG1624-40, granulator, 40 HP, 3 knife open rotor, 2 bed knives, tangential cutting chamber
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1624-40
Used 16" x 24" Granutec Granulator, Model TFG1624-40, 40 HP 3 Knife Open Rotor, 2 Bed Knives Tangential Cutting Chamber 56" Infeed Height 40 HP Lincoln AC Motor 460/3/60, 50A 1765 RPM 324T Frame 2 HP Blower, Cyclone, And Stand Starter Panel With Spare 1/2" Screen, 1/4" Screen S/N: 9942392 Approx. Dimensions: 78" L x ...more
16" x 28" Cumberland #16X28, Granulator, 3-Blade Open Rotor, 20 HP, 208 V, 2002
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Cumberland
Model: 16X28
Year: 2002
Used Cumberland granulator, model 16X28, 16" x 28" grinding chamber, 3 blade open rotor, 20 hp, 208 volt motor, serial# CA083050-02014, built 2002.
16" x 29" Nelmor #G16295PL, granulator, 40 HP
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: G16295PL
Used 16" x 29" Nelmor Granulator, Model G16295PL, 40 Hp 80" Infeed Height 3 Knife Closed Rotor, 2 Bed Knives Screen Size: 7/16" Dual 20 HP Lincoln Electric Type KM AC Motors 230-460/3/60, 49.6A/24.8A - *EACH* Frame 256T Currently Has Gravity Discharge Has Starter Control Panel For Main Motor Approximate Dimensions: ...more
16" x 29" Nelmor #G16295PL, granulator, 40 HP, 80" infeed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: G16295PL
Used 16" x 29" Nelmor Granulator, Model G16295PL, 40 HP 80" Infeed Height 3 Knife Closed Rotor, 2 Bed Knives Screen Size: 7/16" Dual 20 HP Lincoln Electric ODP AC Motors 230-460/3/60, 49.6A/24/8A - *EACH* 1750 RPM Frame 256T Currently Has Gravity Discharge Has Starter Control Panel For Main Motor Approximate ...more
16" x 40" AEC #GP1640 granulator, 40 HP @ 1800 RPM WEG, 5 knife open rotor, 2 bed knives, 53" in-feed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Model: GP1640
Unused 16" x 40" AEC GP1640 Granulator, 40 HP, 2018 Model GP1640 40 HP WEG 1800 RPM Motor With 1 Year Warranty 5 Knife Open Rotor, 2 Bed Knives Built In Control Panel With Main Contactor And Contactor For Blower 53" In-Feed Height 480/3/60, 46 FLA S/N - 0118G441 DOES NOT INCLUDE SCREEN Unused Unit, Never Installed In ...more
JUST ADDED!
16" x 40" Cumberland #1640X, granulator, 30 HP, 3 knife open rotor, 2 bed knives, hydraulic hopper tilt, 2007
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 1640X
Year: 2007
Used 16" X 40" Cumberland 1640X Granulator, 30 HP, New In 2007 Three Knife Open Rotor, 2 Bed Knives 3/8" Screens 16.54" Cutting Circle 30 HP Motor, 1775 RPM, 575V 437 RPM Rotor Speed Hard Faced Rotor And Cutting Chamber Rotating End Disks Hydraulic Hopper Tilt Approximate Dimensions: 80" Lx 72" W x 88" H Approximate ...more
16" x 65" Cumberland #6516, Granulator, top feed, 5 HP
Nationwide Machinery Llc | Mount Clemens, MI
Seller: Nationwide Machinery Llc
Location: Troy, MI
Mfr: Cumberland
Model: 6516
Year: 2012
Cumberland Granulator, Model 6516, S/N BTP70400A-12012, Year: 2012, - Opening: 65." x 16", - Motor: 5 HP, 1750 RPM, - Electrics: 230/3/60, - Top feed.
16.5" x 16.5" FBE Corp. #SR-1013, Granulator, 0.75 kW, 1740 RPM, 230/460 V, 2004
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Fbe Corp.
Model: SR-1013
Year: 2004
Inventory No. 1225-003-0006 Manufacturer Fbe Corp Model No. SR-1013 Name Granulator Arrival Date 12-05-2025 Dimensions L x W x H (inches) 25 x 23 x 56 Capacity 0.75 KW Electrical 3/60/230/460 Weight (lb.) 520 Category Plastics Condition Used Available Quantity 1 Serial No. 125458-4 Make Year 2004 Item 16 1/2" X 16 ...more
17" x 12" IMS #LP-187-SC, plastic granulator, Carbon Steel construction, 8 blade spiral cut, 15 HP
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Ims
Model: LP-187-SC
IMS Model LP-187-SC Plastic Granulator, carbon steel construction. Includes 28" x 18" x 36" feed hopper with 17"x12" feed throat, 8-Blade Spiral Cut, 1/4" diameter screen openings, and bottom discharge. Blades driven by 15 HP, 230/460 Volt, 3/60 Hz. 1760 RPM motor. Serial number LP187SC0582. Mounted on casters. ...more
17" x 14" Nelmor #AG88M, plastic granulator, 1 HP, auger feed, 1997, #52682
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Nelmor
Model: AG88M
Year: 1997
SERIAL. 97E00443, MODEL. AG88M, ID. 05402W, YEAR NEW. 1997, HOPPER OPENING. 17" X 14", AUGER FEED. YES, MOTOR. 1 HORSEPOWER.
17.5" x 23.5" Herbold #SML-45/60, granulator, 100 HP, Kice system (2 available)
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Herbold
Model: SML 45/60
Used 17.5" x 23.5" Herbold SML 45/60 Granulator With Kice System 100 HP 3 Knife Open Rotor 2 Bed Knives 17.5" Rotor Diameter Kice System (1) 12" Zig Zag Aspirators, 2 Kice Cyclones, 1 Air-Lock Control Panel 2 Units Available.
18" x 15" Foremost #HD-6, Plastic Granulator/Grinder, 400 lbs./hr. capacity, 15 HP, 440 V.
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Foremost
Model: HD-6
Foremost plastic granulator/ grinder. Unit is model HD-6 with carbon steel contact parts, complete with 15 HP motor drive, 440 volt. Unit s 18" diameter x 15" wide grinding chamber, with inlet at 14" front to back, 15" left to right. Mill designed for use with sizing screens, not included. This HD series mill is ...more
18" x 24" Conair #CW1824, granulator, 3-knife open rotor, 25 HP, 460 V. motor, sound enclosure, 2007, #40880, 2007
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Conair
Model: CW1824
Year: 2007
Used Conair granulator, model CW1824, 18" x 24" feed opening, 3 knife open rotor, 25 hp, 460 volt motor, with sound enclosure, serial# 491-100708.1, built 2007.
18" x 24" Polymer Systems #1824PST, granulator, 40 HP, 3 knife open rotor
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polymer Systems
Model: 1824PST
Used 18" x 24" Polymer Systems Granulator, Model 1824PST Tangential Feed Cutting Chamber, 3 Knife Open Rotor, Double Angle Cut, 16" Cutting Circle, 40 HP Baldor Motor 2,100 LBS/HR Listed Average Throughput, 7/16" Screen, 3 HP Blower Discharge, 64" Infeed Height S/N: 604702, 460 Volt MISSING PIPING BETWEEN AIR-VEYOR ...more
JUST ADDED!
18" x 36" Rapid #CW1836, Pull Roll Granulator, 75 HP, 5 Fly Knife Open Rotor, Direct Drive Pull Rolls, Air-Veyor Discharge, 2019
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rapid
Model: CW1836
Year: 2019
Used 18" x 36" Rapid Pull Roll Granulator, Model CW1836, 75hp, New in 2019 5 Fly Knife Open Rotor, 2 Bed Knife 75hp Motor Air-Veyor Discharge Direct Drive Pull Rolls with Pneumatic Nip Electric Chamber Assist Swing Craddle for Easy Clean Out Stand Alone Control Panel 460/3/60- 103 Amps Serial Number: RA-501.242260.20.1.
18" x 37" Cumberland #1837, Granulator, 5-Knife Rotor, 18.5" width Knives, 100 HP, 1780 RPM, 460 V, Gravity Discharge, On Leg Base
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Model: 1837
Used Cumberland Model 1837 granulator. Has 18" X 37" feed throat, 5 knife steep angle step adjustable rotor knives (10 segments), each knife being Approx. 18.5" wide, 2 bed knife., Belt driven by a 100 HP 460 volt only 1780 rpm motor. and gravity discharge. All mounted on leg base, swing out chamber door on downstroke ...more
18" x 37" Cumberland #18X37, granulator, 60 HP, 3 knife open rotor, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 18X37
Used 18" x 37" Cumberland 18X37 Granulator, 60 HP Three Knife Open Rotor Two Bed Knives New Parts Per The Seller: New Bearings New Bed Knives New Fly Knives Does Not Include Starter Brokered Item, Located In New York.
JUST ADDED!
18" x 37" Cumberland #37B, Granulator, 100 HP, 3 Knife High Shear Rotor, 2 Bed Knives, 1/4" Screen, 16" Cutting Circle, 7.5 HP Blower
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 37B
Used 18" x 37" Cumberland 37B Granulator, 100 HP, With 7.5 HP Blower 87" Infeed Height 5" Discharge Ground Clearance 3 Knife High Shear Rotor 2 Bed Knives 1/4" Screen 16" Cutting Circle Diameter 2,500 Lbs/Hr Estimated Throughput Per Manufacturer 100 HP AJAX Electric Motor Corp AC Motor, Frame 404T 1775 RPM 460/3/60 ...more
Cumberland #37B, Industrial Plastic Granulator, 18" x 37" feed, 100 HP, 460 V.
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cumberland
Model: 37B
used- cumberland, model 18x37, granulator. 18" x 37" feed throat. 5-knife steep angle step adjustable rotor knives (10 segments). 2- bed knives. designed for film granulation. belt driven by a 100 hp, 460 volt, 1780 rpm motor. gravity discharge. 6" diameter x 37" wide knurled and grooved offset position feed roll ...more
18" x 37" Cumberland #37B, granulator, 3 fly & 2 bed knives, heavy duty double roller bearings
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 37B
##Per Factory Literature:, Motor:** 200HP 1780RPM 3/60/460 Volts, **Capacity:**, Maximum Throughput:, 1700-2500 lbs./hr Per Factory, **Feed Throat:**, Feed Opening Size: 18" x 37" (457mm x 940 mm), **Cutting Chamber:**, Bed Knives: 2 or 3, Rotor Knives: 8, Rotor: Solid, Internal Surfaces: Machined for Easy Cleaning ...more
18" x 37" Cumberland #37H, hog style rotor, 100 HP
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 37H
Used 18" x 37" Cumberland Granulator, Model 37H, 100 HP, Hog Style Rotor.
18" x 37" Cumberland #37H, hog granulator, 100 HP, 15 fly knives, 2 bed knives, 82" feed height
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 37H
Used 18" x 37" Cumberland Granulator, Model 37H, 100 HP Hog Style Rotor, 15 Fly Knives, 2 Bed Knives 16" Cutting Circle, 8" Airveyor Discharge 82" Feed Height S/N 250400-81-002 Approximate Dimensions: 96" L x 72" W x 98" H ROTOR TURNS FREELY NO NAMEPLATE ON MOTOR PROJECT MACHINE - NEEDS WORK - SOLD AS-IS.
18" x 37" Cumberland #37H, hog granulator, 100 HP, 15 fly knives, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 37H
Used 18" x 37" Cumberland Granulator, Model 37H, 100 HP Hog Style Rotor, 15 Fly Knives, 2 Bed Knives 3/4" Screen Previously Discharging Onto Conveyor Quoted And Sold AS-IS. Can Be Sold Tested And Running.
18" x 42" Gloucester #CMG-G1842, granulator, 100 HP, 3-knive open rotor, 2 bed knives, TEFC enclosure, 2004
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
Model: G1842
Year: 2004
Used 18" x 42" Gloucester CMG G1842 Granulator, 100 HP, New In 2004 18" x 42" Feed Throat In-feed Height: 68" 5 Knife Open Rotor 2 Bed Knives 1/2" Screen 100HP, WEG Severe Duty, M05J-9686EM, Frame 404/5T 460/3/60, 114A (131.1 SFA) 1775 RPM TEFC Enclosure Control Panel with Blower Circuit and Main Motor Soft Start ...more
Zerma #GSH-500/1000, Granulator, 75 kW, 19.5" diameter x 39" L, Open Rotor, 400-600 kg/hr, 2012
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Zerma
Model: GSH-500/1000
Year: 2012
used- zerma model gsh 500/1000 granulator. 19.5" dia. x 39" st. side (500 mm dia x 1000 mm st. side). open rotor. rotor is belt driven by a 75 kw (112.5 hp). approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). includes control panel. new 2012. overall dimensions: 65" (1995 mm) x 73" (2255 mm) x 89" ...more
19.9" x 11.4" EconoGrind #ESL180/430, granulator, 5.5 HP, 2 bed knives, 45 fly knives, 2003
Nationwide Machinery Llc | Mount Clemens, MI
Seller: Nationwide Machinery Llc
Location: Troy, MI
Mfr: Econogrind
Model: ESL180/430
Year: 2003
Econogrind ESL180/430 Granulator, S/N 18430502022, Year: 2003, - Opening: 19.9" x 11.4", - Screen hole size:.196, - Motor HP: 4kw (5.5 HP), - Electrics: 230/3/60, - Bed knives: 2, - Fly knives: 45.
JUST ADDED!
20" x 13" Conair #G1420-1-02-A, Granulator, 20 HP, 1750 RPM, 230/460 V.
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Conair
Model: G1420-1-02-A
Inventory No. 0226-089-0006 Manufacturer Conair Model No. G1420-1-02-A Name Granulator Arrival Date 03-05-2026 Dimensions L x W x H (inches) 44 x 60 x 72 Capacity 20 HP Electrical 3/60/230/460 Weight (lb.) 1805 Category Plastics Condition Used Available Quantity 1 Serial No. 1420-3083 Item 20" X 13" Opening, 1750 Rpm.
JUST ADDED!
20" x 20" Conair Wortex #HD2020, granulator, 30 HP Lincoln Motor, 3 Fly Knives, 2 Bed Knives, Tangential Cutting Chamber
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: HD2020
20" X 20" Conair Wortex HD2020 Granulator, 30 HP 3 Fly Knives, 2 Bed Knives 30 HP Lincoln Motor Tangential Cutting Chamber Starter Panel Includes 5 HP Blower, Cyclone & Stand.
Desislava Industrial #500/800, Granulator, 20" x 31" Chamber, 20 HP, 460 V., 5-row open rotors
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: 500/800
used desislava granulator model 500/800 is an industrial-grade granulator designed for efficient size reduction of plastic waste materials. powered by a 20 hp electric motor, this unit operates on 3/60/460 volt, providing robust performance for recycling processes. the machine s a 20" x 31" chamber opening (500 mm x ...more
20" x 48" Cumberland #T50120, granulator, 100 HP motor, 5 knife open rotor, 2 bed knives, 2011
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: T50120
Year: 2011
Used 20" x 48" Cumberland T50120 Granulator, New in 2011 5 Knife Open Rotor, 2 Bed Knives 100 HP Motor, Tangential Cutting Chamber With Blower, Cyclone, And Starter Panel 460/3/60.
20" x 50" Cumberland #50B, granulator, 100 HP, 5 knife open rotor, 2 bed knives, as-is
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 50 GRAN
Used 20" x 50" Cumberland 50Gran Granulator, 150 HP 5 Knife Open Rotor 2 Bed Knives Steep Angle Rotor New Safety Interlocks Installed On Machine Used 150 HP Lincoln Motor, 445T, 167 Amps Late Model WEG Soft Start Panel - New In 2020, WEG SS07 Soft Start, Auxiliary Contactor For Blower, Timers For Start/Stop Sequence ...more
20" x 50" Cumberland #5018, granulator, 300 HP, 18 knife hog style rotor, 2 bed knives, belt driven
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 5018
The Cumberland 5018 Granulator is a robust, high-capacity granulation system designed for efficient size reduction of plastic scrap and other similar materials. With a wide 50" cutting chamber and rugged construction, this unit is well-suited for post-industrial recycling applications involving film, injection-molded ...more
20" x 50" Cumberland #50Gran, granulator, 150 HP, 1780 RPM, Fr.445T, TEFC
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 50GRAN
Used 20" x 50" Cumberland 50Gran Granulator, 150 HP, Model 3KN Infeed Height: 68" (No Hopper) 33" Clearance Gravity Discharge 3 Knife Open Rotor Design 2 Bed Knives1/4" Screen Size 150 HP North American Electric Crusher Series Motor, Cat. No.: PE445T-150-4C 460/3/60, 171A 1780 RPM, Frame 445T, TEFC Includes ABB ...more
20" x 50" Cumberland #50H, granulator, 125 HP, 18 knife helical hog rotor, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 50H
Used 20" x 50" Cumberland Granulator Model 50H, 125 HP Motor 18 Knife Helical Hog Rotor, 2 Bed Knives 18" Cutting Circle.
20" x 50" Cumberland #50H, granulator, 18 knife hog style rotor, 150 HP, 1986
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Model: 50H
Year: 1986
Used Cumberland Model 5018H Granulator, 20" x 50" throat opening with 18 knife hog style rotor, Rotor is belt driven by 150 hp motor, 460 volt, 1175 rpm TEFC motor, 16"od motor sheeve, 26"od rotor sheeve, (2) bed knives (4 pieces) with (1) in the raised position, 160mm rotor bearings with air purge, Cutting chamber ...more
20" x 50" Cumberland #50H, granulator, 200 HP, 18 fly knives, 2 bed knives
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 50H
Used 20" x 50" Cumberland Model 50H Granulator, 200 HP 18 Fly Knives, 2 Bed Knives Includes Box Dumper, Starter Panel, Blower, And Cyclone Rated To 4,000 LBS/HR Machine Weight Approx.18,000 LBS.
21" X 21" Rapid, Plastic Granulator Grinder Recycler, 100 HP, 230/460V 3Ph
Bullseye Industrial Sales LLC | Middlebury, IN
Seller: Bullseye Industrial Sales LLC
Location: Middlebury, IN
Mfr: Rapid
Condition: Used Brand: Rapid Model: MPN: N/A Country of Manufacture: N/A (Please reference this SKU number when making inquiries.), sku: 268797 Click HERE for video Tested and works as it should. 21" X 21" Intake feed 6" OD Outlet Hopper Tilt Is Pneumatic Actuating Hopper Is Approxamatly 1 Cubic Yard (44" x 48" x 65" ...more
JUST ADDED!
22" x 20" FBE Corp. #SR-1517, Granulator, 1.5 kW, 1730 RPM, 230/460 V.
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Fbe Corp.
Model: SR-1517
Inventory No. 0226-167-0008 Manufacturer Fbe Corp Model No. SR-1517 Name Granulator Arrival Date 03-05-2026 Dimensions L x W x H (inches) 32 x 36 x 71 Capacity 1.5 KW Electrical 3/60/230/460 Weight (lb.) 975 Category Plastics Condition Used Available Quantity 1 Serial No. 140022-10F Item 22" X 20" Opening, 1730 Rpm.
22" x 21" Milacron #MBG-18, Plastic Granulator, 7.5 HP, 73" infeed H, 460 V., 3-Ph., 60 Hz, 2006
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: MBG-18
Year: 2006
Used 22" x 21" Milacron MBG-18 Granulator, 7.5 HP 3 Knife Open Rotor, 2 Bed Knives Infeed Height: 73" Screen Size: 1/4" 460/3/60, 12A Belt-Driven Rotor Serial Number: 4183A01/06-30 New In 2006 Approximate Dimensions: 63" L x 60" W x 72" H, 1,820 LBS.
22" x 23" Rapid, Plastic Granulator Grinder Recycler, 100 HP, 230/460V 3Ph
Bullseye Industrial Sales LLC | Middlebury, IN
Seller: Bullseye Industrial Sales LLC
Location: Middlebury, IN
Mfr: Rapid
Condition: Used Brand: Rapid Model: MPN: N/A Country of Manufacture: N/A (Please reference this SKU number when making inquiries.), sku: 269047 Click HERE for video Tested and works as it should. 22" x 23" Intake Feed 9" OD Outlet 1765 RPM Hopper Tilt Is Pneumatic actuated Hopper Is Approximately 1 Cubic Yard (44" x ...more
22" x 24" Rotogran #WO-2224, granulator, 40 HP, Nema 3 Starter Control, 3 knife open rotor, 2 bed knives, 2000
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rotogran
Model: WO2224
Year: 2000
Used 22" x 24" Rotogran Granulator, Model WO2224, 40 HP, New in 2000 3 Knife Open Rotor, 2 Bed Knives, 1/2" Screen, 2" Air-Veyor Discharge Nema 3 Starter Control, 77" Infeed Height, 40HP, 1775 RPM 230/460V U.S Electrical Motor Model R908 Serial Number: FG222240011118WO 1,600 - 2,400 LLBS/HR New In 2000 KNIVES HAVE ...more
22" x 38" Sem Nemor #G2238, granulator, 100 HP, 5 knife solid rotor, 1 HP hydraulic assist
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Sem Nemor
Model: G2238
SEM Nelmor G2238 used granulator for sale, In-feed: Rear In-feed with Air Transport Inlet, Cutting Chamber: 22” x 38” with 1 HP hydraulic assist, Rotor: 5 Knife Solid, Bed Knives: D2 Tool Steel, 2 Positions (4 pcs), Screen: 1/2” (2 pc) Manual Hydraulic drop-down cradle, Base: 97” x 76” ...more
JUST ADDED!
22" x 44" Nelmor #G2244, granulator, 100 HP Starter Panel, Three Fly Knives, 2 Bed Knives, Box Dumper
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: G2244
Used 22" X 44" Nelmor G2244 Granulator, 100 HP Three Fly Knives, 2 Bed Knives Includes: 100 HP Starter Panel Box Dumper In-Feed Conveyor With Variable Speed 5 HP Blower, Cyclone. And Stand This Nelmor Granulator System That Arlington Machinery Has For Sale Is Still Installed And Running Outside Syracuse, NY.
