12 Results
6" x 18" Landis #2R, angle head cylindrical grinder, 24" x 10" grinding wheel, 10 HP, 1000/1271 RPM, 1973
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 2R
Year: 1973
6" x 18" Landis, Model 2R Angle Head Cylindrical, Dead Center Work Head, Hydraulic Tail Stock, Plunge, Behind Wheel Tru-Form Dresser, As Is, 6 X 18 LANDIS MODEL 2R ANGLE HEAD GRINDER, 30 DEGREES, S/N 859-10 YEAR: 1973, STANDARD CATALOG, Nominal work swings. 6", Maximum work swing over table. 6 31/32", Nominal ...more
6" x 18" Landis #2R, angle head cylindrical grinder, 30 deg., 24" x 4" x 12" grinding wheel, 10 HP, 1000/1271 RPM, 1978
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 2R
Year: 1978
6" x 18" Landis, Model 2R, Angle Head Cylindrical, Dead Center Work Head, Manual Tail Stock, Behind Wheel Tru-Form Dresser, As Is, 6 x 18 LANDIS MODEL 2R ANGLE HEAD GRINDER, 30 DEGREES, S/N 870-45 Year: 1978, STANDARD CATALOG, Nominal work swings. 6, Maximum work swing over table. 6 31/32, Nominal distances between ...more
6" x 18" Landis #2R, angle head grinder, 10 HP, 1775 RPM, 1976
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 2R
Year: 1976
6" x 18" Landis 2R Angle Head, Microtronic Feed, Dead Center Work Head, Hyd. Tail Stock, Hyd. Plunge Stepping Motor Feed, Tru-Form Behind the Wheel Dresser, Vari-speed Work Head, Auto Lube, As Is., 30 DEGREES, S/N 859 32 Year: 1976, ELECTRIC MOTORS, Wheel drive motor H.P. 10 HP 1775 RPM, Work drive motor H.P. 1/2 HP ...more
10" x 20" Landis #1R, angle head cylindrical grinder, 16" x 3" x 5" grinding wheel, 5 HP, 1500/1900 RPM, 1981
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 1R
Year: 1981
10" x 20" Landis Angle Head Cylindrical Grinder, Model 1R, Plunge, Microtonic Feed, Behind Wheel Hydrauic Dresser, Tarry, Coolant & Lube, As Is., 10 x 20 LANDIS 1R 30* ANGLEHEAD CYLINDRICAL GRINDER, S/N T879-08 Year:1981, STANDARD, Nominal work ...more
10" x 24" Landis #3R, angle head cylindrical grinder, 30 deg., 7" work rest capacity, 24" x 8" x 12" grinding wheel, 10 HP, 800/964 RPM, 1978
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 3R
Year: 1978
10" x 24" Landis, Model 3R, Angle Head Cylindrical, Plunge Control Stepping Motor, Hydraulic Tail Stock, Behind Wheel Tru-Form Dresser, As Is, 10 x 24 3R LANDIS 30 DEGREE ANGLE HEAD CYLINDRICAL GRINDER, S/N 848-25 Year: 1978, STANDARD CATALOG, Nominal work swing. 10, Maximum work swing over table. 10 31/32, Nominal ...more
Get email updates for newly added Cylindrical Grinders including Plain and Angle Heads
Cylindrical Grinders (including plain and angle head grinders) are machines designed to grind the outer diameter of cylindrical workpieces. Commonly used in industries like automotive, aerospace, and manufacturing, these grinders are available in both plain and angle head configurations for different grinding applications. Cylindrical grinders offer high precision for achieving smooth surface finishes and tight tolerances on parts like shafts, pins, and rollers.
10" x 24" Landis #3R, angle head cylindrical grinder, 30 deg., 7" work rest capacity, 24" x 8" x 12" grinding wheel, 10 HP, 800/964 RPM, 1978
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 3R
Year: 1978
10" x 24" Landis Model 3R, Angle Head Cyclindrical, Plunge Control Stepping Motor, Hydraulic Tail Stock, Behind Wheel Tru-Form Dresser, As Is, 10 x 24 3R LANDIS 30 DEGREE ANGLE HEAD CYLINDRICAL GRINDER, S/N 848-71 Year: 1978, STANDARD CATALOG, Nominal work swing. 10, Maximum work swing over table. 10 31/32, Nominal ...more
10" x 24" Landis #3R, angle head cylindrical grinder, 30 deg., 7" work rest capacity, 24" x 8" x 12" grinding wheel, 10 HP, 800/964 RPM, 1978
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 3R
Year: 1978
10" x 24" Landis, Model 3R Angle Head Cylindrical, Plunge Control Stepping Motor, Hydraulic Tail Stock, Behind Wheel Tru-Form Dresser, As Is, 10 x 24 3R LANDIS 30 DEGREE ANGLE HEAD CYLINDRICAL GRINDER, S/N 848-26 Year: 1978, STANDARD CATALOG, Nominal work swing. 10, Maximum work swing over table. 10 31/32, Nominal ...more
14" x 36" Landis #3R, plain cylindrical grinder, 24" x 4" x 12" wheel, 72-300 RPM work speeds, 2-240 IPM traverse, 10 HP, reconditioned, 1970
Presses for Industry | Detroit, MI
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Landis
Model: 3R
Year: 1970
PRELIMINARY MODEL 3R14" WORK SWING36" DISTANCE BETWEEN CENTERS20" MINIMUM DIAMETER TO GRIND ZERO DIAMETER WORK ON CENTERS2-240 IPMHEAD STOCK WORK SPEEDS:72-116-185-300 RPMGRINDING WHEEL:24" X 4" X 12" STANDARD WHEEL SIZE4" MAXIMUM WHEEL WIDTH800/96 RPM GRINDING WHEEL SPINDLE SPEEDS20" MINIMUM DIAMETER OF WORN ...more
14" x 36" Landis #CH, angle head grinder, 30" x 3" grinding wheel, 15 HP, 1750 RPM, 220/440 V, 1952
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: CH
Year: 1952
14" x 36" Landis, Model CH, Angle Head, Plunge, Hydraulic Table Travel, Lever Operated Tail Stock, 30" G.W., 15 HP Spindle Motor, Cleaned, Painted & Cycled, 14" x 36" LANDIS ANGLE HEAD GRINDER, S/N 472-18 Year:1952, STANDARD CATALOG, Nominal work swing. 14", Nominal distances between centers. 36", Spindle motor. ...more
18" x 48" Landis #3R, plain cylindrical grinder, 19-1/4" max swing, 2-240 IPM traverse, 1"-7" center rest capacity, 14" grinding wheel, 7.5 HP, 1974
Presses for Industry | Detroit, MI
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Landis
Model: 3R
Year: 1974
PRELIMINARY NEW IN 1974Nominal work swings. 18"Nominal distances between work centers. 48"Maximum work swing & diameter standard machinewill grind with full size standard wheel. 19 1/4"Minimum diameter wheel to grind zero diameterwork on centers. 9 1/4"Coolant tank capacity, gallons. 40Hydraulic tank capacity ...more
18" x 48" Landis #4R, Angular wheel Head grinder, 30" x 7" x 12" grinding wheel, 15 HP, 800/964 RPM, 1973
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Landis
Model: 4R
Year: 1973
18" x 48" Landis Model 4R, Angle Head Cylindrical, Manual Tail Stock,Motorized Head Stock, Behind Wheel Dresser, Hyd. Table, Microtronic Feed, Plunge Feed, As Is, 18" X 48" LANDIS 4R ANGULAR WHEELHEAD GRINDER, S/N 852-69 Year: 1973, STANDARD CATALOG, Nominal work swings. 18", Maximum work swing over table. 17 31/32" ...more
Landis #1R, grinder
Lee Stevens Machinery Inc. | Whitmore Lake, MI
Seller: Lee Stevens Machinery Inc.
Location: Whitmore Lake, MI
Mfr: Landis
Model: 1R
