1 - 50 of 2148 listings
Featured
Clausing #SL1430, CNC Lathe, 14" Swing, 2-Axis, 7.4" Turning diameter, 30" Center Distance, 4000 RPM, 10 HP, 2013
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Clausing
Model: SL1430
Year: 2013
2 AXIS, FANUC 0i-MATE-TD CONTROLLER, 7.4" TURNING DIAMETER, 30" CENTER DISTANCE, 4000 RPM, 10 HP, TAILSTOCK, VACUUM CHUCK.
Featured
Daewoo Doosan #Puma-400LC, 30.3" swing, 6.5" bar, 21" chuck, with SMW hydraulic steady rest, 2012
Thoroughbred Machinery Co. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: Thoroughbred Machinery Co.
Location: Houston, TX
Mfr: Daewoo Doosan
Model: PUMA-400LC
Year: 2012
DOOSAN PUMA, MODEL 400 LC With SMW AUTO-BLOK HYDRAULIC STEADY REST, NEW 2012 Delivered 2013, Approx. low 7000 Hours, Maximum Swing: 30.3″, Maximum Turning Diameter: 23.2″, Maximum Turning Length: 81.7″, Bar Capacity: 6.5″, X Axis Travel: 14.2″, Z Axis Travel: 84.8″, Spindle Motor: ...more
Featured
Omniturn #GT-75, CNC lathe, 12" X, 9" Z
TBC | Dade City, FL
Category: CNC Lathes and Turning Centers
Seller: TBC
Location: Dade City, FL
Mfr: Omniturn
Model: GT-75
X axis travel 12" Z axis travel 9" Center height 3/8", 1/2" or 5/8" Tooling plate 14" x 6" Tooling type Gang type Axis repeatability.00005" Axis resolution.00005" Axis accuracy.0001" Control OmniTurn Rapid travel 300 ipm Feed rate Slowest.00005"/rev Fastest 300ipm, Threading Finest 240/inch Coursest.5"/rev, Axis ...more
JUST ADDED!
Fryer #ET-40/120, CNC engine lathe, 40" swing, 120" centers, 28" swing over carriage, 32" 4-jaw chuck, Siemens 828-HS, 30 HP, C-axis, 2019
Poliquin Machinery Inc | Auburn, ME
Category: CNC Lathes and Turning Centers
Seller: Poliquin Machinery Inc
Location: Auburn, ME
Mfr: 99999999999999999999999999999999999999999999999999
Model: 99999999999999999999999999999999999999999999999999
Year: 2019
(1) Pre-owned: Fryer CNC Engine Lathe, Model: ET-40/120, Year of Manufacture: 2019, Location: Massachusetts, Condition: Very Good, 220/3/60, Fryer / Siemens 828-HS CNC, 30 HP, 4 speed geared headstock W/constant SS & Auto shift, Spindle Speed: 10 – 1500 RPM, Spindle Bore: 4.1”, Swing: 40”, Swing ...more
JUST ADDED!
Fryer #ET-40/160, CNC engine lathe, 40" swing, 160" centers, 28" swing over carriage, 32" 4-jaw chuck, Siemens 828-HS, 30 HP, C-axis, 2020
Poliquin Machinery Inc | Auburn, ME
Category: CNC Lathes and Turning Centers
Seller: Poliquin Machinery Inc
Location: Auburn, ME
Mfr: 99999999999999999999999999999999999999999999999999
Model: 99999999999999999999999999999999999999999999999999
Year: 2020
(1) Pre-owned: Fryer CNC Engine Lathe, Model: ET-40/160, Year of Manufacture: 2020, Location: Massachusetts, Condition: Very Good, 220/3/60, Fryer / Siemens 828-HS CNC, 30 HP, 4 speed geared headstock W/constant SS & Auto shift, Spindle Speed: 10 – 1500 RPM, Spindle Bore: 4.1”, Swing: 40”, Swing ...more
Accuway #GX-100, CNC lathe, 2.36" length, 1.1" bar, 15.74" stroke, 2.36" turn diameter, 600 RPM, 2019
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Accuway
Model: GX-100
Year: 2019
Max Length: 60 mm, Spindle Speed: A2-5 in 6000 rpm, Bar Capacity: 30 mm, Max. Turning Diameter: 50 mm, X-Axis Travel: 210mm, Z-Axis Travel: 310mm(155), X-Axis Rapid Traverse Rate: 18m/min, Z-Axis Rapid Traverse Rate: 24m/min, Tool Shank Size Square: 20mm, Tool Shank Size Round: 25mm, Stroke: 400mm, Rapid Traverse ...more
Accuway #UZ-2000T2Y, multi axis CNC turn mill center, 25.9" swing, 2" bar, 45.2" cc, 12.6" dia., 31.1" lgth, A2-5, Mitsubishi M800, 2016
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Accuway
Model: UZ-2000T2Y
Year: 2016
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mitsubishi M800 Series 8 Axis CNC Control, 1525 ...more
Ace Designers #DSJ-400XL, CNC lathe, Fanuc 0iTF, 8" chuck, 2" bar, new in box, 2020
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Ace
Model: DSJ-400XL
Year: 2020
2020 ACE DESIGNERS CSJ-400 XL, Max. Turning Length. 15.31", Max. Turning Diameter. 13.78", X-Axis. 7.09", Z-Axis. 15.31", Chuck Size. 8", Bar Capacity. 2", Spindle Nose. A2-6, Power. 20 hp, Max RPM. 4,000 RPM, Turret Stations. 12, Tailstock. Yes, Fanuc 0i-TF Control, SamChully 8" chuck, 2" Bar Capacity, One Set of ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
JUST ADDED!
Ace Designers #CSJ-400-XL, CNC Lathe, 7.09" X, 15.31" Z, 13.78" turning diameter, 8" chuck, 2" bar, 20 HP, 4000 RPM, Fanuc 0i-TF control, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Ace Designers
Model: CSJ-400 XL
Year: 2020
This never-used 2020 Ace Designers CSJ-400 XL CNC lathe has a 12-station turret, an 8" SamChully chuck, and a manual tailstock with programmable quill. It has 20 HP and 4,000 RPM, with a 2" bar capacity and a 13.78" max turning diameter over 15.31" of turning length., X-Axis Travel: 7.09", Z-Axis Travel: 15.31" ...more
JUST ADDED!
Acer #ATL-1840E, CNC teach lathe, 18.1" swing, 9.06" swing over cross slide, 35.4" centers, 2.2" bore, D1-6, 60-3000 RPM, 10 HP, Fagor 8055 i/A-TC, flat bed
T R Wigglesworth Machinery | Bedford, OH
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acer
Model: ATL-1840E
ACER 1840E, FAGOR 8055 i/A-TC, 2.2", S:, * 10 HP SINGLE SPEED SPINDLE MOTOR FOR 3 PHASE 60 HZ WIRING, * HARDENED AND GROUND MEEHANITE CASTING BEDWAY, * HARDENED AND GROUND GEARS AND SPINDLE, * 2 GEAR RANGES: LOW - 60 - 6,000 RPM; HIGH - 601 - 3,000 RPM, * D1-6 CAMLOCK WITH 2.2" SPINDLE BORE, * "FAGOR" 8055 i/A-TC ...more
Acra #CST-42120, cnc lathe, 10" bore, 42" swing, 27" swing over cross slide, 120" centers, 24" chuck 4-jaw, 50 HP, Steady Rest, Fanuc Oi-TF Control, Chip Conv., automatic lube, tailstock, new
Bud's Machine Tools | Murray, UT
Category: CNC Lathes and Turning Centers
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Acra
Model: CST-42120
Overview, Type:CNC LathesManufacturer:ACRAModel:CST42-120Condition:New - In-StockStatus:For SaleCountry:United States, MODEL / ITEM CST 42 CST 46 CST 50, Capacity, Swing over bed 1070 mm (42") 1170 mm (46") 1270 mm (50"), Swing over cross slide 680 mm (27") 780 mm (31") 880 mm (35"), Swing over gap *1400 mm (55") ...more
Akira-Seiki #SL-20, CNC lathe, 5.9" X, 13.8" Z, 17.7" swing, 13" between centers, 11.4" turning diameter, 6" chuck, 1.7" bar, 20 HP, 6000 RPM, Akira Mi645 CNC, 2017
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Akira-Seiki
Model: SL-20
Year: 2017
Used CNC Lathe: s a 6" chuck, 1.77" bar capacity, and a 17.7" swing. With a spindle speed of 6,000 RPM, and a 5C collet nose, tailstock, parts catcher, and Akira Mi645 control., Chuck Size 6", Bar Capacity 1.77", Swing 17.7", Turning Diameter 11.4", Spindle Speed 6,000 RPM, Distance Between Centers 13", Turret 10 ...more
Akira-Seiki #SL-20, CNC lathe, 5.9" X, 13.8" Z, 17.7" swing, 11.4" turning diameter, 13" machining length, 6" chuck, 1.7" bar, 24 HP, 6000 RPM, 10 turret, Akira Mi-645 CNC, 2019
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Akira-Seiki
Model: SL-20
Year: 2019
Used CNC Lathe with 2-axis control. s 17.7" swing, 13" machining length, 6" chuck, 24 hp, max 6,000 RPM. Includes tool presetter and chip conveyor. Compact design, dimensions 69.7"x53", weight 5,732 lbs., SWING 17.7", MACHINING LENGTH 13", MAX. TURNING DIAMETER 11.4", X-AXIS 5.9", Z-AXIS 13.8", CHUCK SIZE 6", BAR ...more
Akira-Seiki #SL-20, CNC lathe, Mi-645 Control, 17.7" swing, 6" chuck, 1.7" bar, chip conveyor, 2019
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Akira-Seiki
Model: SL-20
Year: 2019
2019 AKIRA SEIKI SL-20, Swing. 17.7", Machining Length. 13", Max. Turning Diameter. 11.4", X-Axis. 5.9", Z-Axis. 13.8", Chuck Size. 6", Bar Capacity. 1.77", Spindle Bore. 1.8 in, Spindle Nose. A2-5, Power. 24 hp, Max RPM. 6,000 RPM, Turret Stations. 10, Tailstock. Yes, Dimensions. 69.7" x 53", Weight. 5,732 Lbs, Akira ...more
Akira-Seiki #SL20, CNC lathe, 17.7" swing, 1.7" bar, 6" chuck, 13" centers, 11.4" turning diameter, 10 station turret, 20 HP, Mi645 Control, 2017
KD Machinery | Scottsdale, AZ
Category: CNC Lathes and Turning Centers
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Akira-Seiki
Model: SL20
Year: 2017
Used Akira Seiki SL20 (2017) CNC Lathe for Sale. This turning center is fitted with an Akira Mi645 control and a 20 HP spindle motor rated to 6,000 RPM. It has a 6″ chuck, 1.77″ bar capacity, 17.7″ swing and 11.4″ turning diameter, with 13″ distance between centers. Travels measure ...more
Alpha #550, CNC lathe, 1996
iGAM | Detroit, MI
Category: CNC Lathes and Turning Centers
Seller: iGAM
Location: Detroit, MI
Mfr: Alpha
Model: 550
Year: 1996
ALPHA 550 CNC Lathe, 1996 model, offering reliable performance. s 1800 RPM spindle speed, 415V, 3-phase power. Ideal for precision machining tasks. Model: Alpha 550, Serial No: A50144. Don't miss this opportunity for efficient production., Spec Sheet, Model: Alpha 550, Serial No: A50144, 600 Lathe No: A50144/077 ...more
Amada Wasino #AA-1, 5-Axis CNC Turning Machine, 5.8" X, 6.7" Z, 3.9" turning diameter, 6" chuck, 7.5 HP, 6000 RPM, (2) 8-position turrets, Live milling, Fanuc 31i, 2010
Adams Machinery | Libertyville, IL
Category: CNC Lathes and Turning Centers
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Amada
Model: AA-1
Year: 2010
Type of CNC Control Fanuc 31i # Axis 5 Chuck Size 6 inches Turning Diameter 3.9 inches X Axis Travel 5.8 inches Z Axis Travel 6.7 inches Spindle Speed (RPM) 6000 Main Motor 7.5 Live Milling (Yes / No) yes Turret Capacity (2) 8 Position Dimensions 59" x 64" x 59" ht Weight 6000 pounds, Designed for 2 Spindle ...more
Amada #J-1, CNC lathe, 9.8" swing, 6.7" turn diameter, 8.5" length, 5" chuck, 1.5" bar, 6000 RPM, 10 HP, 6 turret, 2013
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Amada
Model: J-1
Year: 2013
The Amada J-1 (2013) is a high-precision CNC lathe designed for accurate turning and machining of small, complex metal or plastic components. Ideal for medical, aerospace, automotive, electronics, hydraulics, and precision manufacturing applications requiring tight tolerances and consistent production., MACHINE, Chuck ...more
Amada #J-1, CNC lathe, 9.8" swing, 5" chuck, 1.5" bar, 6.7" diameter, 8.5" length, 10 HP, 6000 RPM, 6 turret, 2013
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Amada
Model: J-1
Year: 2013
The Amada J-1 (2013) is a high-precision CNC lathe designed for accurate turning and machining of small, complex metal or plastic components. Ideal for medical, aerospace, automotive, electronics, hydraulics, and precision manufacturing applications requiring tight tolerances and consistent production., Chuck Size: ...more
Amada #S10, CNC lathes, single spindle, dual turret, 12.2" swing, 6" chuck, 10.6" centers, 7-Axis, Fanuc 31i-B, tailstock, live tooling, 2012 (8 available)
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Amada
Model: S10
Amada S10 Single Spindle/Dual Turret 7-Axis CNC Lathe - New 2012; 8 available!, AMADA S10 SINGLE SPINDLE/ DUAL TURRET 7-AXIS CNC LATHE, Model: S10 S/N: 108 Year: 2012, *(8) Machines Available, # Axis: 7, Chuck Size: 6", Max Swing Over Bed: 12.20", Max Turning Diameter: 10.24", Max Distance Between Centers: 10.63" ...more
Amera Seiki #S-36L, CNC Lathe, 30.7" swing, 19.6" turning diameter, 49.2" between centers, 18" chuck, 4.6" bar, 10-station turret, Fanuc CNC, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Amera Seiki
Model: S-36L
Year: 2018
Used CNC Lathe, offering multi-axis capabilities. s 780mm swing over bed, 1200mm max turning length, A2-11 spindle nose, 18" chuck, 10-station servo turret, and Fanuc control. hydraulic system and auto lubrication., Swing Over Bed mm (in): 780 (30.7), Max Turning Diameter mm (in): 500 (19.6), Max Turning Length mm ...more
Amera-Seiki #CNC-S36L, CNC lathe, 19.6" diameter, 1,200 RPM, 35 HP, 220 V., 3-Phase, 2018 (2 available)
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Amera-Seiki
Model: CNC-S36L
Year: 2018
New 2018 with less than 6000 hours.Swing - 30.7"Machining Length - 47.24"# Axis - 3Chuck Size - 20"Bar Capacity - 4.6"Power - 35 hpMax RPM - 1,200 RPMTurning Dia - 19.68"Tailstock - 'Yes'Live Tooling - 'No'Sub Spindle - 'No'Control - CNC (Fanuc 0i-TF Control)2018 Ameri Seiki "Top Turn" S-36L ...more
Amera-Seiki #S-36L, 18" chuck, 5.9" bar, 1000rpm, 30.7" swing, 19.6turn, 47.2cc, 10tools, F-0iTF
Amera-Seiki Corp. | Conroe, TX
Category: CNC Lathes and Turning Centers
Seller: Amera-Seiki Corp.
Location: Conroe, TX
Mfr: Amera-Seiki
Model: S-36L
S-36L CNC Lathe, Control: FANUC Oi-TF, 10.4 screen, Swing over bed: 30.7, Max turning dia.: 21.6, Max turning length: 47.2, Distance between ctrs: 49.2, Chuck: 18, 3-jaw hydraulic, Spindle: 1000 RPM, 30/35 HP, 6.5 bore, A2-11 nose, 4.62 bar capacity, 3-speed gearbox, Turret: 10 tools, servo style, Z-axis: Box ways ...more
American #HD-301, CNC lathe, 1998
KD Machinery | Scottsdale, AZ
Category: CNC Lathes and Turning Centers
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: American
Model: HD 301
Year: 1998
Used American HD 301 (1998) Engine Lathe for Sale. This pre-owned American engine lathe is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this American Engine Lathe, please feel free to contact us., Beam Maximum Length128" C-Frame Maximum ...more
JUST ADDED!
American Pacemaker, CNC lathe, 18" x 54", Trak 102 controller, 12" 6-jaw chuck, 2" bore, tailstock, 15 HP, 3 Ph., 60 Hz., 220/440 V.
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: American
12” 6 JAW CHUCK, 2” BORE, TAILSTOCK, TRAK 102 CONTROLLER, 15 HP.
Annn Yang #DY-760C, CNC Flat Bed Lathe, 32" swing, 157" centers, 19" chuck, 5.1" bar, 30 HP, Fanuc Oi-TD, 2014
Machinery Works Inc | Belgium, WI
Category: CNC Lathes and Turning Centers
Seller: Machinery Works Inc
Location: Belgium, WI
Mfr: Ann Yang
Model: DY-760C
Year: 2014
Atrump #KL2180, 21" swing, 80" between centers, coolant, 10 HP, new
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: CNC Lathes and Turning Centers
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: KL2180
Height of Center 10.53" Swing Over Bed 21" Swing Over Cross Slide 12" Distance Between Centers 80" Width of Bed Ways 13.78" Spindle Spindle Nose Mounting STD: D1-8 Spindle Bore STD: 3-3/8" Taper of Spindle Bore MT #7 (Sleeve MT #5) Range Of Spindle Speeds Auto Shift High - Middle - Low Longitudinal Travel (Z Axis) ...more
Bardons & Oliver #500-Series, CNC pipe threading lathe, 20" swing, 18" machining length, 10" turning diameter, 20" chuck, 15" bar, 30 HP, 1500 RPM, 2014
Harris Machine Tools, Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Bardons & Oliver
Model: 500-SERIES
Year: 2014
2014 BARDONS & OLIVER 500 SERIES, Swing. 20", Machining Length. 18", # Axis. 2, Chuck Size. 20", Bar Capacity. 15", Power. 30 hp, Max RPM. 1,500 RPM, Turning Dia. 10", Tailstock. No, Live Tooling. No, Sub Spindle. No, Spindle Bore. 15", Control. CNC, Dimensions. 175 in x 92 in x 90 in, Weight. 15000 lbs.
Binns & Berry #Data-1000-CNC, CNC Lathe, 64.9"/33.46" Swing, 137.7" Centers, 48" 6-Jaw Chuck, 50 HP, 200 RPM, 4-Position Turret, 2000
Prestige Equipment Corp | Philadelphia, PA
Category: CNC Lathes and Turning Centers
Seller: Prestige Equipment Corp
Location: Philadelphia, PA
Mfr: Binns & Berry
Model: DATA 1000 CNC
Year: 2000
Swing Over Bed: 64.96", Swing Over Saddle: 33.46", Maximum Turning Between Centers: 137.79", Maximum Weight Between Centers: 6,600 Lbs., Spindle Speeds: 200 RPM, Maximum X-Axis Speed: 118.11 IPM, Maximum Z-Axis Speed: 236.22 IPM, Approximate Floor Space: 287" x 166", Approximate Weight of Machine: 33,070 Lbs., Fanuc ...more
Bolton Tools #BT6132A / CJK6132, CNC lathe, 2012
TNT Industrial | Orange, CA
Category: CNC Lathes and Turning Centers
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bolton Tools
Model: BT6132A
Year: 2012
#: 00148/TNT/..
Bolton Tools #CBT-1340, CNC Lathe, 12-9/16" swing, 39-3/8" centers, 1-1/2" bore, 2500 RPM, 4 HP, 4 station
Carolina Machinery Sales | Monroe, NC
Category: CNC Lathes and Turning Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Bolton Tools
Model: CBT-1340
Manufacturer′s (to be confirmed), Swing over bed: 12 9/16"., Swing over carriage: 5 1/8"., Distance between centers: 39 3/8"., Taper of barrel : MT5., Spindle hole: 1 1/2"., Range of speed(variable): 100~2500r/min., Feed motor power(X/Z): 4N.M/6N.M(Servo motor)., X rapid traverse: 5m/min., Z rapid traverse : ...more
Breton #NC300-K26, CNC 4-Axis Work Center, 149" X, 90" Y, 11.8" Z, 147" x 88" bed, 20 HP, 12000 RPM, 26 ATC, 400 Volt, 3PH, 2010
Ex-Factory | Charlotte, NC
Category: CNC Lathes and Turning Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Breton
Model: NC300-K26
Year: 2010
BRETON CONTOUBRETON NC300 K26 EVO CNC Stone Work Center., (2) Tables, each bed size of 147" x 88"(3740mm x 2240mm), X-axis travel 149" (3900mm), Y-axis travel 90" (2200mm), Z-axis travel @ 0 - 11.8" (300mm); 15 KW (20) HP electric motor, 0 - 12,000 RPM spindle ; variable speed to 9,000 RPM; each table is motorized to ...more
JUST ADDED!
Bridgeport #EZ-Path-II-SD, CNC Lathe, 8.7" X, 40" Z, 20" swing, 40" centers, 9" socs, 2-9/16" spindle bore, 10 HP, 4000 RPM, EZ-Path conversational control, 1997
Star Equipment Co., Inc. | Utica, MI
Category: CNC Lathes and Turning Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Bridgeport
Model: EZ PATH II SD
Year: 1997
JUST ADDED!
Bridgeport #EZ-PATH, CNC Lathe, 17" x 54", MachMotion X15-10-04 control, 9.75" 4-jaw chuck, 1.5" bore, tailstock, control pendant, 460 V., 1995
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Bridgeport
Model: EZ-PATH
Year: 1995
MACHMOTION X15-10-04 DIGITAL CONTROL PANEL, CONTROL PENDANT, TAILSTOCK, 1.5” BORE, 9.75” 4 JAW CHUCK, 15 A, MADE IN BRAZIL.
Bridgeport, Romi #EZ-Path, CNC lathe 16.5" swing x 40" centers, 8" swing over cross slide, 3-jaw 8" chuck, collet closer
Relco Industries | Southampton, PA
Category: CNC Lathes and Turning Centers
Seller: Relco Industries
Location: Southampton, PA
Mfr: Bridgeport
Model: EZ-PATH
16.5” x 40” Romi Bridgeport EZ Path CNC Lathe, Swing 18" 457.2 mm Centers 48" 1,219.2 mm Dimensions 96” x54” x 71” 96” x54” x 71” Weight 4,000lbs 4,000lbs 16.5” x 40” Romi Bridgeport EZ Path Lathe, Stock#RC852, Model EZ Path, S.N.022-078107-325 ...more
Bridgeport, Romi #EZ-Path, CNC lathe, 16.5" swing, 10" chuck, 3-jaw, 2" bar, 40" centers, 37.5-3000 RPM, Bridgeport E2 Path
G-2000 | Toledo, OH
Category: CNC Lathes and Turning Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Bridgeport
Model: EZ-PATH
16.5" Maximum Swing Over Bed 10" Swing Over Crosslide 40" Maximum Turning Length 2" Bar Capacity 37.5-3,000 RPM Spindle Speeds Bridgeport E2 Path CNC Controls 10" Dia. 3-Jaw Chuck, Machine Type.Lathes, CNC Manufacturer.BRIDGEPORT ROMI Model.EZ PATH Year.N/A Condition.Used CNC Control.yes Type of CNC Control.Bridgeport ...more
Bridgeport, Romi #EZ-Path, comb manual/CNC lathe, 16.5" swing, 2" bar, 37.5-3000 RPM, 8 HP, A2-5, 1994
Greenway & Associates Ltd | Orange City, IA
Category: CNC Lathes and Turning Centers
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Bridgeport
Model: EZ-PATH
Year: 1994
, EZ path control, 2 speed high/low ranges, Coolant.
Bridgeport, Romi #EZ-Path, CNC engine lathe, 17" swing, 10" chuck, 6-jaw, A2-5, tailstock, 1995
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Bridgeport
Model: EZ-PATH
Year: 1995
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Bridgeport EZ Path CNC Control, Dual Electronic ...more
Bridgeport, Romi #EZ-Path, CNC lathe, 40" centers, 8.6" X, 40" Z, 1.97" spindle bore, A2-5 spindle nose, 1994
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Bridgeport
Model: EZ-PATH
Year: 1994
1994 BRIDGEPORT ROMI EZ PATH, Center Distance. 40", X-Axis. 8.6", Z-Axis. 40", Spindle Bore. 1.97 in, Spindle Nose. A2-5, Weight. 4,500 Lbs.
Bridgeport, Romi #EZ-Path-S, CNC teach lathe, 18" swing, 10" chuck, 3-jaw, 2" bar, 40" centers, 7.5 HP, 4000 RPM, tailstock, Dorian quick change tool post w/ tool holders
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: EZ-PATH-S
Spec Sheet:, 18 x 40 Bridgeport Romi EZ-Path S CNC Teach Lathe, Max Swing: 18, Distance Between Centers: 40, Standard Chuck Size: 10, X Axis Travel: 8.6, Z Axis Travel: 40, Feedrates Rapid Traverse X Axis: 295 IPM, Rapid Traverse Z Axis: 394 IPM, Spindle Nose Size: A2-5, Spindle Bore: 2.08, Spindle Speed Range: ...more
Bridgeport, Romi #EZ-Path-S, CNC Teach lathe, 18" x 40", 7.5 HP, 4000 RPM, 10" 3-Jaw Chuck
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Bridgeport
Model: EZ-PATH-S
Swing - 18"Machining Length - 40"# Axis - 2Chuck Size - 10"Bar Capacity - 2.08"Power - 7.5 hpMax RPM - 4,000 RPMTailstock - YesLive Tooling - NoSub Spindle - NoControl - CNCDimensions - 100 x 49Weight - 490018 x 40 Bridgeport Romi EZ-Path S CNC Teach LatheMax Swing: 18Distance Between Centers: 40Standard Chuck Size: ...more
Bridgeport, Romi #EZ-Path-SD, CNC lathe, 17" swing, 8" chuck, 2.08" bore, 40" centers, A2-5, 25-4000 RPM, #4MT
G-2000 | Toledo, OH
Category: CNC Lathes and Turning Centers
Seller: G-2000
Location: Toledo, OH
Mfr: Bridgeport
Model: EZ-PATH-SD
MAXIMUM SWING OVER WAYS.: 17", MAXIMUM SWING OVER CROSS SLIDE.: 8", CHUCK SIZE.: 8", MAXIMUM DISTANCE BETWEEN CENTERS.: 40", X-AXIS TRAVEL.: 8.6", Z-AXIS TRAVEL.: 40", X-AXIS RAPID TRAVERSE [INCH/MIN].: 295, Z-AXIS RAPID TRAVERSE [INCH/MIN].: 394, SPINDLE TAPER.: A2-5, SPINDLE BORE.: 2.08", MINIMUM SPINDLE RPM.: 25 ...more
Bridgeport #EZ-Path-SD, CNC Lathe, 17" Max Dia, 7.5 HP, 4000 RPM, 220 V., 2000
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Machesney Park, IL
Mfr: Bridgeport
Model: EZ-PATH-SD
Year: 2000
Introducing the 2000 Bridgeport Ez-Path Sd CNC Lathe, a reliable addition to your industrial equipment lineup. This CNC Lathe, manufactured by the esteemed Bridgeport, combines precision engineering with robust functionality, making it ideal for your machining needs. Designed to operate on a 220V three-phase power ...more
JUST ADDED!
Bridgeport Romi #EZ-Path-S, CNC lathe, 18" swing, 40" centers, 10" 3-jaw chuck, 2.08" bore, A2-5, 4000 RPM, 7.5 HP, 460 V., 3 Ph., 1997
Great American Eqpt Co | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Bridgeport Romi
Model: EZ-PATH-S
Year: 1997
BRIDGEPORT ROMI EZ PATH S CNC LATHE, Bridgeport EZ Path S CNC Control, 10" 3-Jaw Chuck, 18" Swing, 40" Between Centers, Travels: X=8.6", Y=40", (2) Geared Spindle Max 4000 RPM, Coolant Pump, Chip Pan, New 1997., 1997 BRIDGEPORT ROMI EZ PATH S, WYPOSAŻONY W:, Bridgeport EZ Path S CNC Control, 10" 3-Jaw Chuck, 40" ...more
JUST ADDED!
Cantek #HA-30X3100, CNC Lathe, 30" turning diameter, 122" turning length, 9" bar, 30 HP, 500 RPM, (2) steady rests, powered tailstock, Fanuc 21-TB CNC, 2006
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Cantek
Model: HA-30X3100
Year: 2006
This 2006 Cantek HA-30X3100 CNC lathe takes up to 9" bar through its A2-15 spindle, with 122" of turning length and a 30" turning diameter. It comes with two steady rests, a powered tailstock, and both 3-jaw and 4-jaw chucks, with 30 HP and a max spindle speed of 500 RPM., Spindle Bore: 9", Spindle Nose: A2-15 ...more
Cantek #HA-30X3100, CNC lathe, 9" bar, 122" turn length, 30" turn diameter, Fanuc 21-iTB, 2 Steady Rest, 2006
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cantek
Model: HA-30X3100
Year: 2006
Make: L&L Takang, Model: HA30x3100, Year: 2006, Machine Location: Upon Request, TRAVELS:, X-Travel: 120″, Z-Travel: 30″, Max Turning / Cutting Length: 122″, Max Cutting / Turning Diameter: 30″, SPINDLE:, Bar Capacity: 9″, Spindle Bore: 9″ A2-15, Spindle Speed: 500 RPM, Spindle ...more
Centauro #T5-1600, Lathe, 3000 RPM, tailstock, 2019
Carolina Machinery Sales | Monroe, NC
Category: CNC Lathes and Turning Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Centauro
Model: T5-1600
Year: 2019
2019 Centauro T5 1600 Lathe, Max. distance between the tips, 1600 mm, Height of tips on the bed, 250 mm, Max. turning and milling diameter, 250 mm, Diameter allowed on the rotating rest, 110 mm, Driver and tailstock attachments, 3 C.M., Spindle rotation speed, [650 - 900 - 1100 - 1300](tel:650 - 900 - 1100 - 1300) - ...more
Chevalier #520D, 40.5" swing x 80" centers, 15" thru-hole, Fanuc OiTD, prog.tailstock, 12 sta.turret, Dealer Demo
HTR Global Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Chevalier
Model: 520D
CHEVALIER 520D Capacity, Swing Over Bed:. 40.50", Swing Over Cross Slide. 31.49", Maximum Turning Diameter:. 37", Maximum Turning Length. 78", Distance between Centers. 78", Headstock, Spindle Nose. A2-20, Through Spindle Hole Diameter. 15" (D), Spindle Speeds. 500 rpm, Spindle Motor. 60 HP, Transmission. D model: ...more
Chevalier #FBL-5030C, CNC Lathe, 40.5" swing, 32" chuck, 12" bar, 118" centers, 37" turning diameter, 1000 RPM, 12 turret, Fanuc Oi-TD CNC, 2012
KD Machinery | Scottsdale, AZ
Category: CNC Lathes and Turning Centers
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Chevalier
Model: FBL-5030C
Year: 2012
Used Chevalier FBL-5030C (2012) CNC Lathe for Sale. This machine is controlled by a Fanuc Oi-TD and offers a 40.55″ swing with a 37″ turning diameter and 118″ distance between centers. Chuck size is 32″, with a 12″ bar capacity and spindle speeds to 1,000 RPM. It carries a 12 station ...more
Chevalier #FBL-5030C, CNC Lathe, 2-Axis, 40.6" Swing, 118" Machining length, 32" Chuck, 12" Bar, 37" Turning diameter, 1000 RPM, 12-Station Turret, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Chevalier
Model: FBL-5030C
Year: 2012
CNC Lathe, used, featuring a 40.55" swing, 118" machining length, and 2-axis operation. 32" Bison 4 jaw chuck, 28" Schunk air chuck, tailstock, 12 station, chip removal, and conveyor., 2012 CHEVALIER FBL-5030C, Swing. 40.55", Machining Length. 118", # Axis. 2, Chuck Size. 32", Bar Capacity. 12", Max RPM. 1,000 RPM ...more
Chevalier #FBL-520D, heavy duty CNC lathe, 40.5" swing, 78" centers, 15" hole, 37" turn diameter, 78" turn length, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Chevalier
Model: FBL-520D
Year: 2014
Chevalier FBL520D Heavy Duty CNC Lathe, Capacity, Swing Over Bed: 40.50”, Swing Over Cross Slide 31.49”, Maximum Turning Diameter: 37”, Maximum Turning Length 78”, Distance between Centers 78”, Headstock, Spindle Nose A2-20, Through Spindle Hole Diameter 15” (D), Spindle Speeds 500 ...more
JUST ADDED!
Chevalier #FBL-530C, CNC lathe, Fanuc Control, 40" swing, Bison 4-jaw 32" chuck, 2012
Equipment Hub | Decatur, GA
Category: CNC Lathes and Turning Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Chevalier
Model: FBL-530C
Year: 2012
Stock #: 171260032, Location: TX, Brand: Chevalier, Model: FBL-530C, Year: 2012, Approx. Shipping Weight: 55,000 LBS, Approx. Shipping Dimensions: 338"L x 118"W x 100"H, Spindle Bore: 12.50", X-Axis Travel: 19.30", Z-Axis Travel: 118.10", Max Turning Diameter: 37", Max Swing Over Bed: 40", Max Cutting Length: 118.10" ...more
Chevalier #FBL-530C, CNC Slant Bed Lathe, 37" turn diameter, 118" centers, 60 HP, 12.5" bore, Fanuc OiTD, steady rest, tailstock, 2012
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Chevalier
Model: FBL-530C
Year: 2012
Make: Chevalier, Model: FBL-530C, Year: 2012, Machine Location: Upon Request, Maximum Swing over Bed: 40.55″, Maximum Swing Over Cross Slide: 31.49″, Maximum Turning Diameter: 37″, Maximum Machining Length: 118.11″, X-Axis Travel: 19.29″, Z-Axis Travel: 118.11″, Spindle Nose: A2-20 ...more
