Manufacturer: Durma
Model: HKM-2508
Year: 2000
Thickness: .312
Length x: 9.812
Width of Notch Size: 9.812
Stock # 8344
Price: $7,950 USD
For Sale by Wheeler Machinery Sales
Surplus Record Dealer Since 1998
Location: Pomona, CA
Contact Dan Wheeler
Phone Number: 909...> Show Phone Number 909-348-5610
Let the seller know you found their listing on Surplus Record!
$7,950 USD
Description
2000 DURMA HKM 2508 Hydraulic Power Notcher #8344 #1
Cutting Capacities
Cutting Angle: 90 fixed configuration
Max Cutting Length: 250 mm x 250 mm (9.84" x 9.84")
Max Material Thickness (Mild Steel): 8 mm (0.315")
Max Material Thickness (Stainless Steel): 4 mm to 5 mm (0.157" to 0.196") (Note: Stainless capacity is typically reduced by roughly 40-50% due to the material's higher tensile strength)
Hydraulic & Electrical Systems
Motor Power: 4 kW (5.4 HP)
Maximum Pressure: 210 bar (3045 PSI)
Stroke Rate: Approximately 30 to 35 strokes per minute
Stroke Length: 40 mm (1.57")
Oil Tank Capacity: 50 Liters (13.2 Gallons)
Standard Power Supply: 3-Phase / 400V / 50Hz (or regional equivalents like 460V / 60Hz)
Physical Dimensions & Footprint
Table Size: Roughly 900 mm x 700 mm (35.4" x 27.5")
Machine Length: 1,150 mm (45.3")
Machine Width: 950 mm (37.4")
Machine Height: 1,250 mm (49.2")
Total Machine Weight: Approximately 980 kg (2,160 lbs)
Cutting Capacities
Cutting Angle: 90 fixed configuration
Max Cutting Length: 250 mm x 250 mm (9.84" x 9.84")
Max Material Thickness (Mild Steel): 8 mm (0.315")
Max Material Thickness (Stainless Steel): 4 mm to 5 mm (0.157" to 0.196") (Note: Stainless capacity is typically reduced by roughly 40-50% due to the material's higher tensile strength)
Hydraulic & Electrical Systems
Motor Power: 4 kW (5.4 HP)
Maximum Pressure: 210 bar (3045 PSI)
Stroke Rate: Approximately 30 to 35 strokes per minute
Stroke Length: 40 mm (1.57")
Oil Tank Capacity: 50 Liters (13.2 Gallons)
Standard Power Supply: 3-Phase / 400V / 50Hz (or regional equivalents like 460V / 60Hz)
Physical Dimensions & Footprint
Table Size: Roughly 900 mm x 700 mm (35.4" x 27.5")
Machine Length: 1,150 mm (45.3")
Machine Width: 950 mm (37.4")
Machine Height: 1,250 mm (49.2")
Total Machine Weight: Approximately 980 kg (2,160 lbs)
Inquire Further with Wheeler Machinery Sales!
Buyers Who Viewed This Listing Also Viewed:
1/4" x 10" GMC #HN-25HA, hydraulic sheet metal notcher with fixed angle, quiet hydrualic system, 7.5 HP, 27 SPM, new
Category: Notching Machines
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: HN-25HA
10"1/4"3/16"22 Ga.90 degree2733 x 279 Gal. 7.5 HP, 3 Phase, 220V/25A (optional 440V/15A)39 x 38 x 49"2650 lbs..
3/4" x 3" x 3" Scotchman #AL100U-02, 3420 RPM, 4 HP, 4" x 78-3/4" belt
Category: Notching Machines
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: AL100U-02
(NEW) SCOTCHMAN TUBE & PIPE GRINDER/NOTCHER, Grinding Capacity: 3/4" to 3" O.D., Angle Range: Straight = 90 Degrees to 30 Degrees, Speed: 3420 RPM, Belt Speed: 98.4 Feet Per Second, Belt Size: 4" x 78-3/4" Scotchman Tube & Pipe Grinder/Notchers are strong, accurate machines that operate at high speeds. ...more
1/4" x 10" x 10" Euromac / Haeger #250/6S, hydraulic corner notcher
Category: Notching Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Euromac
Model: 250/6S
10" x 10" x 1/4" EUROMAC/HAEGER "250/6S" HYDRAULIC CORNER NOTCHER, Serial No 23814, Model 250/6S, 10" x 10" x 1/4" EUROMAC/HAEGER "250/6S" HYDRAULIC CORNER NOTCHER, Serial No 23814, Model 250/6S, Automatic Hold Down, Foot Pedal, CATALOG :, Thickness Capacity, Maximum 1/4", Length Capacity 10" x 10", Blade Length 9.84" ...more
1-3/4" x 24" x 10" Baker #Version-I, Banding Notch Groover, 7/8" width x 3/8" deep notches, (3) 14" diameter circular blades, 2026, new
Category: Notching Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: VERSION-I
Year: 2026
BAKER VERSION I Banding Notch GrooverCut "military" or strapping notches in lumber to use as protective binding strips when using banding on palletized materials.: -- Accepts any length boards (24" minimum), from 2-1/2" - 10" wide, and 1-1/4" - 1-3/4" thick. -- (2) Dado cutters make 7/8" w x 3/8" deep notches, and (3) ...more
1/4" x 10" x 10" Euromac #250/6S, hydraulic corner notcher, 9.84" x 9.84" blade, 50 SPM, foot pedal'
Category: Notching Machines
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Euromac
Model: 250/6S
Stock #: 150260010, Location: Decatur, GA, Brand: Euromac, Model: 250/6S, Approx. Shipping Weight: 1,500 Lbs., Approx. Shipping Dimensions: 4' L x 4' W x 5' H, Skidding Fee: $100, Thickness Capacity: 1/4", Length Capacity: 10" x 10", Blade Length: 9.84" x 9.84", Strokes Per Minute: 50 ...more
