go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Wheeler Machinery Sales

247 Pacific St.
Pomona, CA 91768-3217
Platinum Level Dealer
Surplus Record Dealer Since 1998

About

Wheeler Machinery Sales, for three generations, has been dedicated to providing industry with quality used metal working equipment, dependable service, and competitive prices, with over a thousand machines in stock.

Products & Services

  • Automotive Equipment
  • Boring Machines
  • Brakes, Press
  • CNC Machinery
  • Drills
  • Grinders
  • Lathes
  • Milling Machinery
  • Presses
  • Rolls
  • Shears

Associations & Affiliations

483 listings in 143 categories

4-Roll Plate Bending Machines

2 Results

39" x 1/4" Swebend #PB4-6-3, 4-Roll CNC Plate Roll, double pinch design, 2018

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Swebend
Model: PB4-6-3
Year: 2018
2022 Swebend PB4-6-3 4-Roll CNC Plate Roll 1/4" x 39" #7123, Roll Length: 39.37", Top Roll Diameter: 5.98", Bottom Roll Diameter: 5.98", Side Roll Diameter: 5.51", Pre-bending Capacity: 1/4", Circular Rolling Capacity: 5/16", Main Motor: 5.5 HP, Double-pinch design, enabling pre-bending at both ends of the plate ...more

Wheeler Machinery Sales has 1 more listing in 4-Roll Plate Bending Machines.

Abrasive Flow Hones

1 Result

Extrude Hone #Spectrum-VIII, Abrasive Flow Hone.28.75" max opening, 300-850 PSI

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Extrude Hone
Model: SPECTRUM-VIII
Extrude Hone Spectrum 8/6 Abrasive Flow Hone #6855 #1, Media Cylinder:, Diameter8, Capacity628.3 Cu. In., Hydraulic Ram Diameter6, Hydraulic Clamping Force29.4 Ton, Opening Between Tooling Plates Maximum10, Worktable Height46-1/2, Distance Between Columns24, Hydraulic Power Pack:, Operating Pressure350 1,500 PSI ...more

16" Enterprise #200/16RH, Hydraulic Alligator Shear, 2" round capacity, automatic & manual controls

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Enterprise
Model: 200/16RH
Enterprise 200/16RH Hydraulic Alligator Shear #7058 #2, Operate Foot Pedal Stop Action or Continuous, 16" Blade Length, 2" Round Capacity (Mild Steel), 3/4" x 8" Flat Capacity (Mild Steel), Automatic and Manual Controls, Hardened Blade Seat, Electronically Controlled Stroke Adjuster, Timken Taper Roller Bearings.

Wheeler Machinery Sales has 3 more listings in Alligator Shears.

2" x 2" x 1/4" E.G. Heller #WSH40H3, Hydraulic Angle Bending Roll, 2" (Sch.40) pipe, 10 ton hydraulic center hole positioning, #7017 #1

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: E.g. Heller
Model: WSH40H3
E.G. Heller WSH40H3 Hydraulic Angle Bending Roll 2" x 2" x 1/4" #7017 #1, Angle Iron: 2 x 2 x 1/4, Pipe: 2 (Sch. 40), Roll Shaft Diameter: 40mm, Center Roll Positioning: Hydraulic 10 Tons, Shaft Speed: 10 RPM, Universal Tooling: 6 5/8 O.D., Programming: NC Touchpad, Number of Programs: 8, Distance Between Shafts: 10 ...more

Wheeler Machinery Sales has 1 more listing in Angle Bending Rolls.

Apron and Hand Brakes

5 Results

16 gauge x 4' Dreis & Krump #416, hand apron brake

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dreis & Krump
Model: 416
Dreis & Krump 416 Hand Apron Brake 48" x 16 ga. #7093 #1, Capacity: 16 ga. Mild Steel, 18 ga. Stainless, Length of Bend: 48", (2) Counterweights.

Wheeler Machinery Sales has 4 more listings in Apron and Hand Brakes.

5 Ton, Femco #3-1/2, Ratcheting Arbor Press, 17-1/2" capacity over table

Category: Arbor Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Femco
Model: 3-1/2
Famco 3-1/2 Ratcheting Arbor Press - 5 Ton #7137 #2, Max. Diameter of Work 18, Capacity over Table 17, Size and Length of Ram 1 x 1 x 24, Largest Arbor 3 5/8, Leverage Ratio 70-1, Weight 550 lbs..

15 Amps, L-Tec #PWC-5-Ser.2/PWM-6, Plasma Needle Arc Welder, S/N X87F-17041

Category: Arc Welders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: L-Tec
Model: PWC-5-SER.2/PWM-6
L-Tec PWC-5 Ser. 2/PWM-6 Plasma Needle Arc Welder #7162 #2, Input: 115 V - 15 AMP, Output 40 Volt - 15 AMP, Rated @ 85% Duty Cycle.

Wheeler Machinery Sales has 2 more listings in Arc Welders.

Automated Batch Washers

1 Result

Jen Fab #Lean-Clean-360-4, Four Basket Parts Washer, 42" load height, 300 gal.tank volume, 2015

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Jen Fab
Model: LEAN-CLEAN-360-4
Year: 2015
2015 Jen Fab Lean Clean 360-4 Four Basket Parts Washer #6888, Number of Baskets: 4, Floor Space: 8 2 x 9, Load Height: 42", Tank Volume: 300 Gal., Pump Output: 40 psig/180 gpm, Dryer Blower: 6000 CFM, Dryer Heat: 40 KW, Controls: PLC Controlled with OIT / HMI and Modem, Sound Level: < 79 DBA, Basket Size: Jenfab SS ...more

Bar Feeders and Loaders

4 Results

Edge #Rebel-102, Servo bar feed, .315"-4" bar diameter, 60" bar length, 30" magazine rack capacity

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Edge
Model: REBEL-102
2014 Edge Rebel 102 Servo Bar Feed #7234 #1, Bar diameter capacity: 8 mm to 102 mm (.315 to 4.000), Maximum bar length: 60 (Not to exceed spindle length), Magazine rack capacity: 30 (762 mm), Bar loading cycle time: 20 seconds, Power consumption: 1 kW (1.5 kVA), Operating voltage: 230V/60Hz 3-phase, Control voltage: ...more

Wheeler Machinery Sales has 3 more listings in Bar Feeders and Loaders.

18" width x 20" D x 20" H Blue M #IGF 6680F-A, inert gas forced air oven, 1100°F/593°C, 208/240/3/60, #5466

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Blue M
BLUE M IGF 6680F-4 INERT GAS FORCED AIR OVEN 20" x 18" x 20" #5466 #1, Inside Dimensions: 20"D x 18"W x 20"Ht., Maximum Temperature: 1100 F/593 C, Electrics: 208/240V/3PH/60Hz.

Wheeler Machinery Sales has 22 more listings in Bed and Knee Milling Machines - Vertical.

4" Dayton Belt Grinder, 3450 RPM

Category: Belt Grinders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dayton
Dayton Belt Grinder 4" #6503 #1, Belt Width: 4", Belt Speed: 3,450 RPM, Motor: 1 1/2 HP Single Phase.

Wheeler Machinery Sales has 4 more listings in Belt Grinders.

37" x 60" Timesavers #137-2HDCMW, 2-Head Belt Sander, 15-45 FPM

Category: Belt Sanders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Timesavers
Model: 137-2HDCMW
Timesaver 137-2HDCMW 2-Head Belt Sander #6881 #1, Maximum Sanding Width: 36, Belt Size: 37 x 60, Minimum Part Length: 7-5/8, Part Thickness Adjustment Range: 0 8, Conveyor Speed (Variable): 15 45 FPM, Electrical: 460V/3PH, Approx. Shipping Weight: 6,000 Lbs., Approx. Shipping Dimensions: 102 L x 84 W x 92 H, 2-Head ...more

Wheeler Machinery Sales has 1 more listing in Belt Sanders.

Blast Cleaning and Shot Peening Miscellaneous

2 Results

ALC #40002, Portable Abrasive Blaster, 8' L x 1" dia hose, gun included, safety valve

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Alc
Model: 40002
ALC 40002 Portable Abrasive Blaster #7029 #2, Max. PSI: 125, Body Material: Steel, Body Finish: Powder-Coat, Hose Length: 8 ft, Hose Diameter: 1 in, Nozzle Size: Multiple (Only One Included), Gun Included: Yes, Safety Valve: Yes, Media Capacity: 90 lb, For Use With: Black Beauty, Steel Grit, Glass Bead, Dimensions L x ...more

Wheeler Machinery Sales has 1 more listing in Blast Cleaning and Shot Peening Miscellaneous.

Booth and Cabinet Blast Cleaning and Shot Peening

7 Results

18" x 26" Central Pneumatic #42202, Bench Top Blast Cabinet, 18" x 26" cabinet, 1/4 in. NPT air inlet

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Central Pneumatic
Model: 42202
Central Pneumatic 42202 Bench Top Blast Cabinet #6926 #2, Cabinet Size: 18 x 26, Air inlet size: 1/4 in. NPT, Door opening (in.): 16 in. W x 15-1/4 in. H, Outlet fitting size: 2-1/2 in., Air Consumption: 10 CFM @ 100 psi, Capacity: 30 Gal, Window Dimension: 22-1/2 x 10-1/2.

Wheeler Machinery Sales has 6 more listings in Booth and Cabinet Blast Cleaning and Shot Peening.

C Frame Hydraulic Press Machines (Gap Frame)

3 Results

12 Ton, Denison #T120HC0264FSD268D270JA217A72S210, Hydraulic C-Frame Press, 12" stroke, 18" daylight

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Denison
Model: T120HC0264FSD268D270JA217A72S210
Denison T120HC0264FSD268D270JA217A72S210 Hydraulic C-Frame Press #6906 #1, Capacity: 12 Ton, Maximum PSI: 1910, Stroke: 12", Daylight: 18", Bed Size: 18" F-B x 22.5" L-R, Throat Depth: 10", Cylinder Bore: 4", Ram Diameter: 2.75", Pump GPM: 9, Tank Capacity: 20 Gal., Main Motor: 10 HP, Electrics: 220V/3Ph/60Hz, Dual ...more

Wheeler Machinery Sales has 2 more listings in C Frame Hydraulic Press Machines (Gap Frame).

48" width x 48" H x 24" D Blue M #DCRI-326-G-ST-350, electric furnace, locking doors, 2-shelves, S/N DC8462, #5949

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Blue M
Model: DCRI-326-G-ST-350
Blue-M Model DCRI-326-G-ST-350 Electric Oven 48" x 24" x 48" #5949 #2, Max. Temperature: 600 F / 316 C, Inside Dimensions: 24" F-B x 48" L-R x 48" Ht., Outside Dimensions: 36" F-B x 65" L-R x 88" Ht., Locking doors, 2 Shelfs, Intermac manual timer, Type J Temp. Control / Stat 350 Chart, Electrics, 480V, 3 phase.

Carbide, Friction and Cold Saws

3 Results

6.3" Doringer D-350, Manual Cold Saw, ferrous, 14" blade, 54-108 RPM

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Doringer
Model: D-350
Doringer D-350 Manual Cold Saw 14" #6704 #1, Cutting material type: Ferrous, Blade size: 14", Feed type: Manual, Blade speeds: 54 to 108 rpm, Cutting capacity: Round Tubing - 4.5" @ 0 to 45, Square Tubing - 4" Straight, 3.6" @ 0 to 45, Rectangular - 6.3" x 2.75" Straight, 4.75" x 2.35" 0 to 45, Solids - 2.45" @ 0 to ...more

Wheeler Machinery Sales has 2 more listings in Carbide, Friction and Cold Saws.

Chain Hoists, Monorail and Trolley Cranes

1 Result

3 Ton, CM #Lodestar, A-frame gantry hoist

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Cm
Model: LODESTAR
A Frame Gantry Hoist with CM Lodestar 3 Ton Hoist, recently purchased from shop that closed. No name on gantry but very well made, even casters look expensive., Hoist is a CM Lodestar 3 ton model., Uprights are 112" as shown, the cross i-beam is 8" high., i-beam is 128" long, total overall length when assembled is ...more

.5 Ton, Dimplex Thermal #50AC, Chiller, 20 GPM, 20 gallon capacity, #5504

Category: Chillers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dimplex Thermal
Model: 50AC
Dimplex Thermal Solutions Model 50AC Chiller 1/2 TON / 20 GPM #5504 #1, Tonnage Capacity: 1/2 Ton, Water @ 44 Dgs. F: 6,000 BTU/Hr, Flow Rate: 20 GPM, Resevoir Capacity: 20 Gallons, Water Pump Motor: 1/2, Fan Motor: 1/4, Refrigerate: R-22, Dimensions: 39" x 27" x 35" H, Weight: 350 lbs..

Wheeler Machinery Sales has 4 more listings in Chillers.

2" Clark & Lewis #CL200CNC, hydraulic tube bender, 10" radius, 5 HP, PC CNC Control, #4981

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Clark & Lewis
Model: CL200CNC
CLARKE & LEWIS CL200CNC, HYDRAULIC Tube Bender 2" #4981 #1, Capacity:, Tubing: 2", Schedule 80 Steel Pipe: 1", Round Bar, Mild Steel: 1 1/8", Tube Length Over Mandrel: 120", Centerline Radius (Max. Std.): 10", Maximum Bend Angle: 180 Deg. Plus 15 Deg. Overbend Allowance, Max. Bend Arm Speed (Variable): 17 RPM ...more

Wheeler Machinery Sales has 2 more listings in CNC Bar, Pipe and Tube Benders.

12.9" x 25.6" Okuma #GA-26T, CNC cylindrical grinder, OSP-U10G Control, rotary dresser, 10 HP, 2011

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Okuma
Model: GA-26T
Year: 2011
2011 Okuma GA-26T CNC Cylindrical Grinder #7230 #1, MAX SWING: 12.99, DISTANCE BETWEEN CENTERS: 25.6, MAX WORKPIECE WEIGHT: 110 LBS., GRINDING WHEEL: 24 DIA X 2.95 WIDE, SPINDLE MOTOR: 10 HP, WHEEL SPEED: 8859 FPM (PERIPHERAL), X-AXIS WHEEL SLIDE TRAVEL: 12.59, Z-AXIS TRAVEL: 25.59, CENTER HOLETAPER IN WORK SPINDLE: ...more

Wheeler Machinery Sales has 2 more listings in CNC Cylindrical Grinders.

Burgmaster #1D, Turret Drill, 1/2" drilling/tapping capacity, 6 spindles, 275-4010 RPM, #6208

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Burgmaster
Model: 1D
Burgmaster 1D Turret Drill 1/2" #6208 #1, Table size: 12" x 17", Number of spindles: 6, Number of spindle speeds: 4 per spindle, Range of spindle speeds: 275 4010 RPM, * 1, 4 High4010, 1355 RPM, * 1, 4 Low2005, 675 RPM, * 2, 5 High2550, 860 RPM, * 2, 5 Low1275, 430 RPM, * 3, 6 High1630, 550 RPM, * 3, 6 Low815, 275 ...more

197" Hydrapower #SCNC5M V Groover, Siemens Sinumerik 808D Control, 48" W x 197" L sheet size

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hydrapower
Model: SCNC5M
2014 Hydrapower SCNC5M V Groover 48" x 197" x 0.50" SS #6660, Sheet Size- Width (X): 48", Sheet Size- Length (S): 197", Thickness Range: 0.031"- 0.50 SS, Table Height: 38", Cutting Speed: 400- 800 IPM, Tool Cutting Capacity (Z): 0.06" x 0.06", Z Axis Min. Feed: 0.0004", Sheet Feed Positioning (X): 0- 80 IPM, Main ...more

6" x 18" Harig #EZ-Surf-II, CNC, 8" x1-1/4" x1-1/4" wheel, Tru-Tech CNC Control, 50 FPM, 5000 RPM

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Harig
Model: EZ-SURF-II
Harig EZ-Surf II CNC Surface Grinder 6" x 18" #7090 #1, TABLE SIZE: 6" X 18", TABLE TRAVEL: 24.5", CROSSFEED TRAVEL: 6.7", VERTICAL WORKING HEIGHT: 12", UNDER WHEEL: 7", GRINDING WHEEL CAPACITY: 8" X 1-1/4" X 1-1/4", MAX LONGITUDINAL SPEED: 50 FPM, SPINDLE SPEED: 5000 RPM, WEIGHT: 3000 LBS, DIMENSIONS: 75" L X 90" W X ...more

Wheeler Machinery Sales has 1 more listing in CNC Horizontal Spindle Surface Grinders.

Amada #Lasmac-LC-1212-Alpha-II, CO2 Laser, 4' x8' sheet, 50" X, 50" Y, 11.8" Z

Category: CNC Lasers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: LASMAC-LC-1212-ALPHA-II
Amada Lasmac LC 1212-Alpha II CO2 Laser #7134, Max. Sheet Size: 4 x 8, X-Travel: 50, Y-Travel: 50, Z-Travel: 11.8, Max. Positioning Speed: 1575 IPM, Positioning accuracy: TBD, Work Chute: 66 x 21, Max. Weight: 484 Lbs., Will Cut: 1/2 Thickness in Mild Steel, Overall Dimensions: 123 x 100 x 86.5, CNC CONTROLLER : ...more

Wheeler Machinery Sales has 1 more listing in CNC Lasers.

CNC Lathes and Turning Centers

16 Results

Acra #ATL-1118A, CNC (Hardinge Type) Tool Room Lathe, 11" swing, 1-1/16" bar, 18" centers, Anilam 4200T Control

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Acra
Model: ATL-1118A
Acra ATL-1118A CNC (Hardinge Type) Tool Room Lathe #6730 #2, SWING OVER BED: 11", SWING OVER CROSS SLIDE: 6", SWING OVER CARRIAGE: 9", DISTANCE BETWEEN CENTERS: 18", SPINDLE NOSE TYPE: 4 DEGREE TAPER (HARDINGE TYPE), SPINDLE SPEEDS: 0-4,000 RPM, HOLE THROUGH SPINDLE: 1-1/4", BAR CAPACITY: 1-1/16", CAPACITY WITH ROUND ...more

Wheeler Machinery Sales has 15 more listings in CNC Lathes and Turning Centers.

Profiling #CG2-150, Gas Cutting Machine, #6370

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Profiling
Model: CG2-150
Profiling CG2-150 Gas Cutting Machine #6370 #2, Cutting Thickness: 0.315"- 2.364, Cutting Speed: 1.97- 29.55 IPM, Cutting Diameter:, Circle: 23.64", Square:19.7" x 19.7", Rectangle: 15.76" x 35.46", Straight Line: 47.28", Variable Speed Control.

Wheeler Machinery Sales has 1 more listing in CNC Plasma Cutting Systems (Flame Cutters).

10 gauge x 10' Wysong #1010-CNCB, CNC power squaring shear, 36" Back Gauge, one-shot lube, 1997

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Wysong
Model: 1010-CNCB
Year: 1997
1997 Wysong 1010-CNCB CNC Power Squaring Shear 10' x 10 ga. #7120, Capacity: 10 Ga. Mild Steel, 14 Ga. Stainless, Length: 10 Overall, Strokes Per Minute: 48 SPM, Control: Wysong PC 100, Overall Dimensions Approx.: (L x W x H) 147" x 60" x 60", Weight Approx.: 13,500 Lbs., (Two) 2' Front Sheet Supports, 36 Back ...more

CNC Press Brakes

4 Results

55 Ton, Komatsu #PH550X255, CNC hydraulic brake, 8' overall, 87" between housing, Automec Autogauge G24

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Komatsu
Model: PH550X255
Komatsu PH550x255 CNC Hydraulic Press Brake 50 Ton x 8' #6429 #1, Tonnage: 55, Length Of Bed & Ram: 8', Distance Between Housings: 87", Ram Stroke: 0"- 5.91", Ram Adjustment: 3.93", Ram Open Height: 13.58", Ram Speeds: Variable, Throat Depth: 10", Motor: 7.5 HP, Dimensions (L x W x H) : 111" x 50 x 84" ...more

Wheeler Machinery Sales has 3 more listings in CNC Press Brakes.

Walter #Helitronic-Power-HMC-400, CNC Tool & Cutter Grinder, 13.8" X, 7.9" Z, 18.5" Z, 1997

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Walter
Model: HELITRONIC-POWER-HMC-400
Year: 1997
1997 Walters Helitronic Power HMC-400 CNC Tool & Cutter Grinder #6977 #1, Capacity of Workpiece Dia.: 0.04 3.9, Max. Peripheral Grinding: 10, Max. End Face Grinding: 7.3, Max. X Axis Travel: 13.8, Max. Y Axis Travel: 7.9, Max. Z Axis Travel: 18.5, A Axis: Infinite, C Axis Rotary: +/- 200 ( 0.001 ), Grinding ...more

CNC Universal Grinders

1 Result

Voumard #300, CNC Universal ID/OD Grinder, 2003

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Voumard
Model: 300
Year: 2003
Voumard 300 CNC Universal ID/OD CNC Grinder #6774 #2, O.D. Grinding (max)(inch): 21.653, I.D. Grinding (min): 0.039, I.D. Grinding (max, inch): 19.685, O.A. Grinding L. (inch): 29.527, Workpiece weight (max, lbs): 1,100, Longitudinal Travel (inch): 39.3, Cross Travel (inch): 11.81, Machine Weight (lbs): 17,600, O.D. ...more

Acer #Ultima-3VK, 2-Axis CNC Knee Mill, 10" x50" table, 3 HP, w/ Acurite CNC Control

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Acer
Model: ULTIMA-3VK
Acer Ultima 3VK 2-Axis CNC Knee Mill w/ Acurite CNC Control #7124 #1, Working Surface: 10" x 50", Longitudinal Travel: 34", Cross Travel: 16", Vertical Knee Travel: 16", Ram Travel: 20", T-Slot Number, Size: 3 at 5/8" width, Main Motor: 3 HP, Head moves right to left : 90, Head tilts front to back: 45, Spindle Drive: ...more

Wheeler Machinery Sales has 9 more listings in CNC Vertical Bed Mills.

Conveyor and Pass Through Parts Washer

1 Result

Ransohoff #Leanveyor, Stainless Steel High Production Two Stage Washer, 2017

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Ransohoff
Model: LEANVEYOR
Year: 2017
2017 Ransohoff Leanveyor Stainless Steel High Production Two Stage Washer #6832, Engineered & Built for High-Production, Work Opening: 2-3/4 Part Height, Conveyor Width: Dual 8 Belts, Thru Rate: 2400-Parts per Hour, per Lane, Conveyor Speed: 20-FPM, Wash Pump Motor: 3-HP Stainless Steel Gusher, Wash Pump Flow ...more

Coordinate Measuring Machines (CMM)

2 Results

Brown & Sharpe #Microval-343, coordinate measuring machine, 12" X, 16" Y, 12" Z, S/N 11524

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Brown & Sharpe
Model: MICROVAL-343
Brown & Sharpe Microval 343 Coordinate Measuring Machine #6764 #2, CMM Type: Manual Bridge Model, Travel Range: X = 12 (300mm), Y = 16 (400mm) Z = 12 (300mm), Footprint: W = 29 (737mm) L = 30 (762mm) H = 86 (2185mm), Total Weight: 550Lbs (250 KG) CMM and Stand, Accuracy: Repeatability: 3m Linear Accuracy (m): 3.5 ...more

Wheeler Machinery Sales has 1 more listing in Coordinate Measuring Machines (CMM).

Dme #PPC750, Ejector Pin Grinder & Cut Off Machine, 12000 RPM cut off wheel, manual infeed

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dme
Model: PPC750
DME PPC750 Ejector Pin Grinder & Cut Off Machine #6748 #1, Cut Off Wheel Speed: 12,000 RPM, Cup Wheel Speed: 4,500 RPM, Main Unit Approx. Weight: 450 lbs., Main Unit Dimensions (in inches): Length: 36.00" Width: 24.00" Height: 50.00", Manual Infeed.

16" Abrasive, Straight Cut Off Saw, 5" most shapes, 2" solids, 7.5 HP, straight cut only

Category: Cutoff Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Abrasive
Abrasive 16" Straight Cut Off Saw #7213 #1, Blade Size: 16", Capacity:, Most Shapes: 5", Solids: 2", Main Motor: 7.5 HP, Straight Cut Only, Dimensions (L x W x H): 60" x 50" x 70", Weight: 500 Lbs..

Wheeler Machinery Sales has 1 more listing in Cutoff Saws.

Die Cutting Press Machines

2 Results

20 Ton, Pederson Freeman #282, 17-1/2" x35-1/4" bottom platen, 14-1/4" x22-3/4" upper platen

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pederson Freeman
Model: 282
Pederson Freeman 20 Ton Clicker Press Model 282 #2, Bottom Platen 17 1/2" x 35 1/4", Upper Platen 14 1/4" x 22 3/4", 6 1/2" Diameter Column, Overall Dimensions: 40 " x 40 " x 62" H, 3 phase, 220 volt.

Wheeler Machinery Sales has 1 more listing in Die Cutting Press Machines.

Disc Sanders

1 Result

12" Grizzly #G0702, Disc Sander W/ Brake, 1 HP, 1720 RPM, tilting table, 2017

Category: Disc Sanders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Grizzly
Model: G0702
Year: 2017
2017 Grizzly G0702 12" Disc Sander w/ Brake #6932 #1, Disc Size: 12, Horsepower: 1 HP, Voltage: 110V, Phase: Single, Disc Speed: 1720 RPM, Tilting Table, Sliding Guide.

Disintegrators (Including Tap Disintegrators)

2 Results

Electro-Arc #2DBQT, AC Table Top Tap Disintegrator, 10 kVA, .05"-2" capacity, 31" x 31" table

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Electro-Arc
Model: 2DBQT
Electro Arc 2DBQT AC Table Top Tap Disintegrator 10 kVA #6966 #1, Capacity:.05" - 2", Table Work Area: 31" x 31", Max Table Load: 2,000 LBS, Work Height from Spindle to Tabletop: 30", Work Head Vertical Adjustment: 9", Adjustable Stop: 8", Adjustable Swivel: 0 to 90 L/R, Adjustable In/Out: 24", Manual Height ...more

Wheeler Machinery Sales has 1 more listing in Disintegrators (Including Tap Disintegrators).

Downstroke (Vertical) Balers

1 Result

60" width x 30" D x 48" H Bace #V63OCC, Vertical Baler, 50 cu. ft. bale volume, 10 HP

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Bace
Model: V63OCC
Bace V63OCC Vertical Baler 60" x 30" #6957, Nominal Bale Size: 60" x 30" x 48", Bale Weight: Up to 1000 lbs OCC, Bale Volume: 50 cu. ft., No. of Bale Tie Slots: 5, Compact Force lbs - Normal / Maximum 56,548 / 62,172, Platen Pressure: 32 PSI, Average Cycle Time: 49 Seconds, Loading Height: 54.50", Ejector System: ...more

1000 cfm, 25 sq.ft., Meco #300-5, Dust Collector, 5 HP, 15 cu.ft. storage

Category: Dust Collectors
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Meco
Model: 300-5
Meco 300-5 Dust Collector #7152 #2, Main Motor: 5 HP, Storage in cu. ft.: 15, Filter in area in sq. ft.: 25, Weight in lbs.: 600, Approximate Air Volume CFM: 1,000.

Wheeler Machinery Sales has 6 more listings in Dust Collectors.

5" x 13" Emco #Compact-5, CNC Bench Lathe

Category: Engine Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Emco
Model: COMPACT-5
EMCO COMPACT 5 CNC BENCH LATHE 5" x 13" #6226 #2, Swing Over Bed: 5", Swing Over Cross Slide: 2 1/4", Distance Between Centers: 13", Longitudinal Slide Travel: 11.82", Cross Slide Travel:1.97", Spindle Speeds: 50- 3,200 RPM, Hole Through Spindle:.63", Spindle Taper: #2 MT, Feed Rates (Hand Operation):.394- 15.76 IPM ...more

Wheeler Machinery Sales has 20 more listings in Engine Lathes.

Ebbco #OS1 Oil Slick, portable oil filtration system

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Ebbco
Model: OS1
Brand: Ebbco, Model: OS1 Oil Slick.

Finger Brakes

3 Results

18 gauge x 2' Connecticut #218, finger brake

Category: Finger Brakes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Connecticut
Connecticut 218 Finger Brake 2' x 18 Ga. #7018 #1, Length of Bend: 24-1/4, Capacity on Mild Steel, 3/8 Flange, Full Length: 18 Ga., Maximum Lift of Beam: 7/8, Shipping Weight: 155 lbs., Minimum Reverse Bend: 5/16, Finger Widths: 2, 3, 4, Maximum Depth of Box: 3.

Wheeler Machinery Sales has 2 more listings in Finger Brakes.

144" x 144" x 12", cast iron t-slotted floor plate

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: CAST IRON T-SLOTTED FLOOR
Cast Iron T-Slotted Floor Plate 144" x 144" x 12" Thick #6974 #1, LENGTH OF PLATE: 144", WIDTH OF PLATE: 144", THICKNESS OF PLATE: 12", NUMBER OF T SLOTS: 10, CENTER DISTANCE OF T SLOTS: 12", T SLOT WIDTH AT TOP: 1-3/8", T SLOT DEPTH: 2-1/2", T SLOT WIDTH AT BOTTOM: 2-1/2", BOLT DOWN ANCHOR HOLES: 18, LEVELING BOLTS: ...more

2000 lb. Big Joe #PDI-24-A7, Electric Walkie Straddle Stacker Forklift, 81" lift, 24" load center

Category: Forklifts
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Big Joe
Model: PDI-24-A7
Big Joe PDI-24-A7 Electric Walkie Straddle Stacker Forklift - 2,000 Lb. #7159 #2, Max. Capacity: 2,000 Lbs., Fork Width Max.: 24", Load center: 24", Lift Height: 81", Voltage: 24V, 110 VAC, Charger on Board.

Wheeler Machinery Sales has 2 more listings in Forklifts.

Gap Frame Single Crank Press Machines

2 Results

45 Ton, Amada #TP-45C-X2, OBS punch press, 3.93" stroke, 10.03" die height, 2.36" slide adj, 1991

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: TP-45C-X2
Year: 1991
1991 Amada TP45C-X2 OBS Punch Press 45 Ton #6946, Capacity: 45 Ton, Stroke: 3.93", Die Height: 10.03", Slide Adjustment: 2.36", Ram Size: 15.74" x 13.77", Bed Size: 31.49" x 17.71", Main Motor: 5 HP, Micro Guard Safety Light Curtains, Press Commander Control, Bolster Plate, Stroke Counter.

Wheeler Machinery Sales has 1 more listing in Gap Frame Single Crank Press Machines.

Gun and Deep Hole Drilling Machines

1 Result

1.5" x 36" DeHoff #1536, CNC Gun Drill with DeHoff Drill Sharpener, 2001

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dehoff
Model: 1536
Year: 2001
2001 De Hoff 1536 CNC Gun Drill #6854 #2, DeHoff Model 1536, Serial # DH-1977, Spindle Horsepower 7 1/2 HP, Drill Capacity 1 1/2" Diameter Mild Steel, Number of Drill Heads: 1, Number of Spindles: 1, Drill Head Stroke: 18 inches, Feed Rate:.1 ipm to 30 ipm, Rapid Retraction of Drill Head: 400 ipm, Spindle Speed: ...more

H Frame Hydraulic Press Machines

3 Results

20 Ton, Central Hydraulics, hand operated shop press

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Central
Central Hydraulics 20 Ton Hand Operated Shop Press #7119 #1, Capacity: 20 Ton, Maximum working distance (in.): 32 in., Minimum working distance (in.): 0 in., Width between channels (in.): 22-3/8 in., Shipping Weight: 183.43 lb., Hand Operated Pump, Manual Adjustment on Lower Platform.

Wheeler Machinery Sales has 2 more listings in H Frame Hydraulic Press Machines.

Hand Benders

1 Result

DiAcro #2, Rod Parter, .625" mild steel capacity, 1" die head thickness

Category: Hand Benders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Di Acro #2 Rod Parter #7028 #2, RATED CAPACITY MILD STEEL:.625, DIE HEAD THICKNESS: 1, MACHINE SHIPPING WEIGHT: 55 LBS.

Beverly #2BA, Throatless Shear, 10 gauge mild steel capacity, 14" gauge stainless capacity, 2BA

Category: Hand Shears
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Beverly
Model: 2BA
Beverly 2BA Throatless Shear #7211 #2, Mild Steel Capacity: 10 gauge (3.4mm), Stainless Capacity: 14 gauge (2.0mm), Blade Length (inches): 4.375, Weight (pounds): 35, Dimensions (LxWxH): 9 x 10 x 39 inches.

Wheeler Machinery Sales has 1 more listing in Hand Shears.

Newage Digital #Versitron Hardness Tester, 8.2" vert capacity, 7.8" throat

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Newage
Model: VERSITRON
Newage Digital Versitron Hardness Tester #6519 #2, Vertical Capacity: 8.2", Throat Depth: 7.8", Clamping Capacity: 240 Lbf.ft, Major Loads:, Regular: 60, 100 & 150 kgf, Superficial: 15, 30 & 45 kgf, Preload:, Regular: 10 kgf, Superficial: 3 kgf, Test Scales:, Regular: A, B, C, D, E, F, G, H, K, L, M, P, R, S ...more

5" x 8" FOM Industries #Mirage-600 under power Feed CNC Saw System, 12" cut depth, 100" cut width, 2017

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Fom
Model: MIRAGE-600
Year: 2017
2017 Fom Industrie Mirage 600 Up Feed CNC Saw System #7132, Application: Wood, metal, plastic, Motor: 10 HP belted motor drive, Saw blade RPM: 2800, Footprint: 95x62x72, Weight: 1,880 Lbs., CUTTING :, Saw blade diameter: 15.74, 19.68, or 23.62, Maximum cutting depth: 12, Maximum cutting width: 100, Cutting angle: 0-45 ...more

Wheeler Machinery Sales has 16 more listings in Horizontal Band Saws.

Horizontal Hones

2 Results

Sunnen #EC-3500-Eclipse, Horizontal Power Stroking Hone, 0.060"- 6.5", 1996

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Sunnen
Model: EC-3500-ECLIPSE
Year: 1996
Sunnen EC-3500-Eclipse Horizontal Power Stroking Hone 0.060"- 6.5" #6592 #1, Diameter Capacity Min, Manual Stroke: 0.060", Diameter Capacity Max, Manual Stroke: 6.5", Diameter Capacity Min, Power Stroke: 0.060", Diameter Capacity Max, Power Stroke: 4", Diameter Capacity Min, Auto Sizing: 0.125", Diameter Capacity Max ...more

Wheeler Machinery Sales has 1 more listing in Horizontal Hones.

Horizontal Shapers

1 Result

7" South Bend #7, Shaper, 0-7" ram stroke, 3-114 FPM, 3" vertical travel, 6-5/16" x 5" table

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: South Bend
South Bend 7" Shaper #6883 #1, Length of Ram Stroke: 0 7, Strokes Per Minute (Approximate): 42/75/120/195, Cutting Speeds (Approximate): 3 to 114 ft. per minute, Vertical Travel: 3, Tool Post Takes Tool Holder Shank: 3/8 x 13/16, Head Swivel: 360 Deg., Table Size: 6-5/16 x 5, Depth of Table: 5-3/8, Horizontal Travel: ...more

1200 Ton, Aida #CFT-1200, 4-Stage Cold Forging Transfer Press, 11" stroke, 30.31" die height

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Aida
Model: CFT-1200
1998 Aida CFT-1200 4-Stage Cold Forging Transfer Press #6825, Capacity: 1200-Ton (11760-kN), Capacity of Each Stage: 600-Ton (5880-kN), Stroke: 11.81" (300mm), Die Height: 30.31" (770mm), Slide Adjustment: 1.18" (30mm), Speed: 25-40 SPM, Bolster Area: 72.84" L-R x 35.43" F-B (1850mm x 900mm), Bolster Thickness: 10.8 ...more

100 Ton, Clifton #1P, 4-post platen press, 10" stroke, 23" daylight, auto/manual modes

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Clifton
Model: 1P
Clifton 1P 4-Post Platen Press 100 Ton #6845, Maximum Pressing Capacity: 100 Ton, Stroke: 10", Daylight Opening: 23", Platen Size: 12" x 12", Distance Between Posts: 17" L-R x 10" F-B, Operating Pressure: 125 PSI, Ram Diameter 10", Main Motor: 3 HP, Auto/Manual Modes.

Hydraulic Press Brakes

7 Results

12 Ton, Bantam #B-412, pneumatic press brake, 4' overall, 30 SPM, 90 psi, rear operated manual back gauge, lower die rail

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Bantam
Model: B-412
Bantam B-412 Pneumatic Press Brake 12 Ton x 4' #7054 #1, Type: Pneumatic, Capacity: 12 Ton, Working Length: 48", Strokes: 30 Strokes per Minute, Air Pressure: 90 PSI, Weight: 1,340 lbs., Dimensions: 32" x 64" x 27" H, Rear Operated Manual Back Gauge, Lower Die Rail, Foot Pedal, Same Small Dies (Uppers & Lowers).

Wheeler Machinery Sales has 6 more listings in Hydraulic Press Brakes.

75 Ton, Kard #75X100, 4-Post Hydraulic Trim Press, 31" stroke, 35" daylight, dual palm button

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kard
Model: 75X100
Kard 75X100 4-Post Hydraulic Trim Press #6873 #2, Capacity: 75 Ton, Maximum Stroke: 31", Maximum Daylight to Bed: 35", Overall Bed & Ram Area: 84" L-R x 50" F-B, Distance Between Posts: 59-3/4" L-R x 32-3/4" F-B, Distance Floor to Bed: 33-3/4", Post Size: 5" Diameter, Cylinder Size: 8" Diameter, Main Motor: 25 HP ...more

Wheeler Machinery Sales has 2 more listings in Hydraulic Presses.

Initial and Double Pinch Plate Bending Rolls

1 Result

4' x 16 gauge Pexto #418, initial pinch plate roll, 3" roll diameter, 1 HP, foot switch, manual drop end

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pexto
Model: 418
Pexto 418 Initial Pinch Plate Roll #7151 #2, Type : Initial pinch, Length: 48", Capacity: 16 ga. MS / 18 ga. SS, Roll Diameter : 3'', Motor: 1 HP, Voltage : 230/460V, Three Phase, Approx. Dimensions: 74'' x 24'' x 42'', Weight: 1,150 Lbs., Foot Switch, Manual Drop End.

Ironworkers

2 Results

3" x 3" x 1/4" Wysong #100, Mechanical Ironworker, 100

Category: Ironworkers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Wysong
Model: 100
Wysong 100 Mechanical Ironworker #7205 #1, Flats: 4 x 1/4, Rounds: 7/8 Diameter, Squares: 3/4, Angles: 3 x 3 x 1/4, 90 V Notch: 2-1/4 Deep thru 1/4, Punch: 9/16 Thru 1/4, Electrical: 460V/3PH, Approx. Shipping Weight: 2,500 Lbs., Approx. Shipping Dimensions: 72 L x 50 W x 68 H.

Wheeler Machinery Sales has 1 more listing in Ironworkers.

Roper Whitney #58, foot operated kick punch, 5 Ton, 18" throat, 5-3/4" throat height, punches & dies

Category: Kick Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Roper Whitney
Model: 58
Roper Whitney #58 Foot Operated Kick Punch 5 Ton #6527 #1, Tonnage: 5, Depth of Throat: 18", Height of Throat: 5 3/4", Length of Stroke: 1", Adjustment of Ram: 3/4", Die Space wi1h Stroke Down and Adjustment Up from bed of press: 5", Diameter of Punch Shank Hole in Ram : 1", Slug Hole Clearance: 3" x 5", Weight: 450 ...more

Knuckle Joint Press Machines

2 Results

1500 Ton, Aida #PK-1500, Single Point Knuckle Joint Press, 9.84" stroke, 44.1" die height

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Aida
Model: PK-1500
1998 Aida PK-1500 Single Point Knuckle Joint Press #6824, Capacity: 1500-Ton (14700-kN), Stroke: 9.84" (250mm), Die Height: 44.1" (1120mm), Slide Adjustment: 0.79" (20mm), Speed: 25-40 SPM, Bolster Area: 47.2" L-R x 47.2" F-B (1200mm x 1200mm), Bolster Thickness: 11.8 (300mm), Slide Face Area: 47.2" L-R x 47.2" F-B ...more

Wheeler Machinery Sales has 1 more listing in Knuckle Joint Press Machines.

Mechanical Press Brakes

4 Results

50/75 Ton, Dreis & Krump #1012-C, Mechanical Brake, 144" OA126" BH, CNC Back Gauge

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dreis & Krump
Model: 1012-C
50/75 Ton x 12' Dreis & Krump 1012-C Mechanical Brake with CNC Back Gauge #6666 #2, Capacity: 50 Ton Mid-Stroke, 74 Near Bottom, Overall Bending Length: 12' (144"), Length Between Housings: 10' 6" (126"), Stroke: 3", Ram Adjustment: 4", Strokes Per Minute: 40, Die Space - Stroke Down, Adjust. Up: 12" ...more

Wheeler Machinery Sales has 3 more listings in Mechanical Press Brakes.

Lincoln #Idealarc-R35-325, Mig Welder With LN-7 Wire Feeder

Category: Mig Welders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lincoln
Model: IDEALARC-R35-325
Lincoln IDEALARC R35-325 Mig Welder with LN-7 Wire Feeder #6726 #1, 325A @ 100% Duty Cycle, 400A Max., 3-Phase Power 208v/220v/430v, Voltage and Current Meters, Dimensions: 42 x 28 x 87 H, Weight: 754 lbs., Lincoln Model LN-7 Wire Feeder, MIG Gun.

Wheeler Machinery Sales has 4 more listings in Mig Welders.

Misc. Automotive Equipment

1 Result

Zep Dyna Clean, Safety Kleen Parts Washer

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Zep
Model: SAFETY KLEEN PARTS WASHER
Zep Dyna Clean Safety Kleen Parts Washer #6815 #1.

Molding Compression Hydraulic Presses

1 Result

83 Ton, Lauffer #VSKO83 Heated Platen Molding Press, 12.5 stroke, heated platen

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lauffer
Model: VSKO83
Lauffer VSKO83 Heated Platen Molding Press #7092, Tonnage: 83 Ton, Stroke: 12.5", Total Opening: 26", Distance Between Posts: 24-1/2" L-R x 17-1/2" F-B, Post Diameter: 3", Heated Platens, Control Console with Clamp & Transfer Pressure, Timers, Enclosure, ***No Hydraulic Pump Included***.

Multi Spindle Drill Presses

1 Result

3 Spindle Walker Turner, 14" 3-Head Gang Drill, 14" swing, 7" throat, 17" F-B x 45" L-R table

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Walker Turner
Walker Turner 14" 3-Head Gang Drill #6963 #2, Number of Spindle Heads: 3, Swing: 14", Throat Depth: 7", Distance Between Spindles: 14", Height Under Spindles: 19-1/2", Table Size: 17" F-B x 45" L-R.

Notching Machines

6 Results

.064" x 6" x 6" DiAcro #1, Hand Notcher 6" x 6" x 16 gauge, 90° max notch, #7021

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Diacro
Model: 1
Di Acro #1 Hand Notcher 6" x 6" x 16 Ga. #7021 #1, Capacity in Mild Steel: 16 Ga., Blade Size: 6" x 6", Max. 90 Degree Notch, Stroke:.625", Machine Weight: 350 LBS.

Wheeler Machinery Sales has 5 more listings in Notching Machines.

Oil Field and Hollow Spindle Lathes

1 Result

24" x 80" LeBlond, hollow spindle engine lathe, 9" spindle hole, 3-Jaw chuck, 3-Jaw chuck, toolpost

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Leblond
Le Blond 24" Hollow Spindle Sliding Gap Bed Engine Lathe w/ 9" Spindle Hole - 24"/52-1/2" x 80"/120" #7190 #2, Swing over Bed: 24, Swing over Carriage Ways: 18-1/4, Swing in Gap: 52-1/2", Distance Between Centers (Closed): 84, Distance Between Centers (Open): 120", Spindle Bore: 9, Spindle Speed Range (24) 3 - 400 ...more

Optical Comparators

1 Result

14" MicroVu #H14, optical comparator, 5" x18" table, surface & profile illumination, #5432

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Microvu
Model: H14
MICRO-VU H14 Optical Comparator 14" #5432 #1, Screen Diameter: 14", Table Size: 5" x 18", Measuring Range(Horiz): 8", Measuring Range(Vert): 6", Surface & Profile Illumination.

J.V. Manufacturing (Cram-A-Lot) #VB-60-B, vertical bailer, 10 HP, 2010

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: J.v. Manufacturing
Model: VB-60-B
Year: 2010
2010 J.V. Manufacturing (Cram-A-Lot) VB-60-B Vertical Bailer #6903 #2, Bale Size: 60x30x48, Cylinder Diameter: 6", Rod Diameter: 3.5, Main Motor: 10 HP, Voltage: 208-230/440 VAC 3 ph, Material: Cardboard, Shrink Wrap, Head Force: 59,300 lbs, Stroke (cycle) Time: 53 sec, Avg. Bale Wt: 950# (lbs), Max Bale Wt: 1050# ...more

6" Baldor #662E, Bench Grinder, 3/4" wheel width, 1/2" wheel bore, 3600 RPM, grinding wheels

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Baldor
Model: 662E
Baldor 662E Bench Grinder 6" #6454 #1, Wheel Size: 6", Wheel Width: 3/4", Wheel Bore Size: 1/2", Wheel Speed: 3,600 RPM, Motor: 1/3 Single Phase, Grinding Wheels, Work Light, Stand With Water Pot.

Wheeler Machinery Sales has 5 more listings in Pedestal Grinders.

4" x 12" Landis #4-H, Plain Od Grinder, 16" diameter grinding wheel

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Landis
Model: 4-H
Landis 4-H Plain OD Grinder 4" x 12" #6918 #2, MAXIMUM WORK SWING: 4- 31/32", DISTANCE BETWEEN CENTERS: 12", HYD. TABLE, INFINITELY VARIABLE: 6" TO 120" IPM, TABLE SWIVEL, GRADUATED TO GRIND TAPER, - INCLUDED ANGLE: 3" PER FT., GRINDING WHEEL SIZE: 16" DIA., MAXIMUM WHEEL WIDTH: 3", GRINDING WHEEL SPEEDS (2): 1500 ...more

Wheeler Machinery Sales has 1 more listing in Plain Cylindrical Grinders.

Plasma Cutters/Punches

2 Results

Miller #Spectrum 3080, Hand Held Plasma Cutter

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Miller
Model: SPECTRUM-3080
Miller Spectrum 3080 Hand Held Plasma Cutter #6715 #1, Cutting Capability, Rated: 7/8 in (22 mm), Quality: 1-1/4 in (32 mm), Sever: 1-1/2 in (38 mm), Rated Output80 A at 140 VDC, 40% Duty Cycle, 1-Phase, 80 A at 140 VDC, 60% Duty Cycle, 3-Phase, Plasma Gas Flow/Pressure7.2 CFM (207 L/min) at 80 PSI (483 kPa), Net ...more

Wheeler Machinery Sales has 1 more listing in Plasma Cutters/Punches.

12" x 14" Conair #1412-201-02a Hushguard granulator, 10 HP, 1/4" screen

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Conair
Model: 1412-201-02A
Conair 1412-201-02A Hushgard Granulator #7229 #1, Main Motor: 10 HP, Voltage: 480/3/60, Screen: 1/4", Infeed: 12" W x 14" H, Blades are in good condition.

10 Ton, Dake #972210, pneumatic H-frame press, 10000 psi, 8" stroke, 38" DL

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dake
Model: 972210
Dake 972210 Pneumatic H-Frame Press #7238 #1, Maximum Operating Pressure (psi): 10,000, Capacity (imperial tons): 10, Maximum Vertical Daylight (in): 38, Maximum Bed Width (in): 16.75, Power Source Type: Manual, Power Source Valve: Manual, Cylinder Stroke (in): 8, Rapid Advance Speed (in/sec): 4, Pressing Speed ...more

Wheeler Machinery Sales has 1 more listing in Pneumatic Presses.

18 gauge x 6.6' Baileigh #SH-8014, Hydraulic Shear, 24" Back Gauge, 26 SPM, 2019

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Baileigh
Model: SH-8014
Year: 2019
2019 Baileigh Model SH-8014 Hydraulic Shear #6667 #2, Back Gauge Length: 24", Shear Length: 80", Motor: 3 HP, Capacity: 14 Ga. Mild Steel, 18 Ga. Stainless, Strokes Per Minute: 26, Blade Angle: 1, Electrics: 220V / 3-phase, Shipping Weight: 3,700 Lbs., Shipping Dimensions: (Inches) 106 x 37 x 57, Manually Operated ...more

Wheeler Machinery Sales has 9 more listings in Power Squaring Shears (Gauge).

.177" x 9' Amada #M-3045, mechanical power squaring shear, 38" front operated power back gauge, 10' squaring arm

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: M-3045
Amada M-3045 Mechanical Power Squaring Shear #7121 #2, Shearing Capacity (Thickness): 0.177 (4.9MM), Shearing Capacity (Length): 118 (3,000MM), Rake Angle: 1, Back Gage Range: 0-38, Number of Holddowns: 13 (Hydraulically Operated), Dimensions: 175 X 55 X 75, Speed: 60 SPM, Weight: 15,560 LBS, Front Operated 38 Power ...more

Wheeler Machinery Sales has 6 more listings in Power Squaring Shears (Inch).

Precision and Second Operation Lathes

4 Results

Feeler #FTS-27, 2nd Operation Lathe, 9" x 36", 230-3500 RPM, Lever 5C collet closer, 6 station turret, #6990 #1

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Feeler
Model: FTS-27
Feeler FTS-27 2nd Operation Lathe #6990 #1, Swing Over Bed: 9", Distance Between Centers: 36", Travel Double Tool Cross Slide: 3 3/4", Travel of Turret Slide: 4", Turret Hole Diameters: 5/8", Spindle Speeds: 230 - 3500 RPM (Variable), Spindle Capacity With 5C Collet: 1 1/16", Coolant Pump Capacity: 3 Gal., Electrics: ...more

Wheeler Machinery Sales has 3 more listings in Precision and Second Operation Lathes.

Press Accessories and Parts

1 Result

CME #RF1212, Air Feeder for Press, 12" L feed x 12" W stock, 960 IPM, 80-110 psi, RF1212

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: CME #RF1212
CME RF1212 Air Feeder for Press - 12" x 12" #7227 #1, Feed Length: 12", Stock Width: 12", Speed: 960 IPM, Air Requirement: 80 - 110 PSI.

Press Brakes, Gauges

2 Results

20 gauge x 1' Grizzly #T26472Z, 3 In 1 Sheet Metal Machine

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Grizzly
Model: T26472Z
Grizzly T26472Z 3 In 1 Sheet Metal Machine 20 Ga. x 12" #6606 #1, Capacity (Mild Steel): 20 Ga., Max. Width: 12", Min. Reverse Bend: 3/8", Maximum height pan/box brake sides: 1-3/4", Number of fingers: 4, Width of fingers: 1", 2", 3", and 6", Slip roll minimum diameter: 1-3/8", Slip roller diameter: 1-1/4", Slip roll ...more

Wheeler Machinery Sales has 1 more listing in Press Brakes, Gauges.

4 Ton, Hydraulic Broaching Press, 12 stroke, 36" between uprights, hydraulic tank & pump

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Hydraulic Broaching Press 4 Ton #6721 #1, Capacity: 4 Ton, Stroke: 12", Distance Between Uprights: 36", Maximum Vertical Opening: 40" (Adjustable by Pin), Hydraulic Pump: 8.8 HP - 220/440V, 3-Phase, Hydraulic Tank and Pump, Manual Value for Up/Down Motion, Adjustable Top Crown and Lower Bed.

40 KVA American #A/P-40-18, Press Type Spot Welder, 18" throat, 180 Amps, timer, air operation

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: American
Model: A/P-40-18
American A/P 40-18 Press Type Spot Welder 40 kVA #6907 #1, Weld Rating: 40 kVA at 50% Duty Cycle, Throat Depth: 18", In Amps: 180 A, Secondary Volts: 5.5 V, Voltage: 220 V - Single Phase, Timer, Air Operation, Janda 600V Weld Control, Electric Foot Switch.

Wheeler Machinery Sales has 1 more listing in Press Type Spot Welders.

Amada #Togu-III, Automatic Punch & Die Grinder, 6.30" max tool diameter, 3000 RPM, 2 HP

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: TOGU III
Amada Togu III Automatic Punch & Die Grinder 6.30" #6496 #2, MAX. DIAMETER TOOL SIZE: 6.30", MAX. GRINDING: 0.39", MAIN AXIS MOTOR: 2 HP, MAIN AXIS ROTATION SPEED: 3,000 RPM, MAIN AXIS TRAVEL: 9.45", MAIN AXIS FEED MOTOR (SERVO): 0.05 HP, MAIN AXIS FEED SPEED-HIGH: 23.6 IPM, MAIN AXIS FEED SPEED-MIDDLE: 2.36 IPM ...more

Wheeler Machinery Sales has 1 more listing in Punch and Die Grinders.

4 Ton, DiAcro #2, Hand Operated Punch, 12" depth of throat, #7023

Category: Punches
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Diacro
Model: 2
Di Acro #2 Hand Operated Punch #7023, RATED CAPACITY: 4 TONS, DEPTH OF THROAT: 12, HEIGHT OF THROAT: 3, HOLE IN RAM DIAMETER: 1, STROKE OF RAM:.625, MACHINE SHIPPING WEIGHT: 390 LBS, STAND NET WEIGHT: 76 LBS.

Wheeler Machinery Sales has 2 more listings in Punches.

Radial Drills

1 Result

3' -8" Kao Ming #KMR-700DS, Radial Drill, Box Table, 88-1500 RPM, #4MT Taper

Category: Radial Drills
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kao Ming
Model: KMR-700DS
Kao Ming KMR-700DS Radial Drill #7099 #1, Column Diameter: 7-7/8", Maximum Distance Spindle To Column Face: 28", Minimum Distance Spindle To Column Face: 7-15/32", Head Travel On Arm: 20-15/32", Maximum Distance Spindle To Bed: 42", Minimum Distance Spindle To Bed: 12-19/32", Vertical Arm Travel: 21", Spindle Taper: ...more

Hansvedt #SM-150B, Die Sinker Electrical Discharge Machine, 30 AMP, 24" x 16" x 11.5" tank size, S/N D02203

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hansvedt
Model: SM-150B
Hansvedt SM-150B Die Sinker EDM 30 AMP #6476 #1, AMPS: 30, WORK TABLE: 15" X 9", TANK SIZE: 24" X 16" X 11.5", LONGITUDINAL TABLE TRAVEL: 8", CROSS TRAVEL: 6", RAM TRAVEL: 6", MAXIMUM DISTANCE PLATEN TO TABLE: 16", SIZE OF RAM PLATEN: 13" X 5", DIMENSIONS:, EDM: 40" X 36" X 38", CONTROL: 20" X 20" X 24", DIELECTRIC ...more

Wheeler Machinery Sales has 1 more listing in Ram (Die Sinker) EDM.

Reciprocating Surface Grinders - Horizontal Spindle

26 Results

6" x 12" Boyar-Schultz #H612, Surface Grinder, Walker Permanent Magnetic Chuck, automatic lube

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Boyar-Schultz
Model: H612
Boyar Schultz H612 Surface Grinder 6" x 12" #6745 #1, Table Travels:, Longitudinal Table Travel: 13", Cross Saddle Travel: 7", Chuck Size: 6" x 12", Max. Height Under Wheel: 11.5", Main Motor: 1 HP, Electrics: 220/440v, 3 Phase, 6" x 12" Walker Permanent Magnetic Chuck, Auto Lube.

Wheeler Machinery Sales has 25 more listings in Reciprocating Surface Grinders - Horizontal Spindle.

34.2 cfm, 125 psi, Curtis #10HT12-3, reciprocating piston air compressor, 10 HP, 120 gallon tank

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Curtis
Model: 10HT12-3
Curtis 10HT12-3 Reciprocating Piston Air Compressor 34.2 CFM x 10 HP #6467 #1, CFM Rating: 34.2, PSI Rating: 125, Motor: 10 HP, Tank Size: 120 Gallon.

Wheeler Machinery Sales has 1 more listing in Reciprocating Type Air Compressors.

20-350 scfm, 120°F, 200 psig, Beko #DPRAHT250NAE, Refrigerated Air Dryer

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Beko
Model: DPRAHT250NAE
Beko DPRAHT250NAE Refrigerated Air Dryer #6797 #1, 20 to 350 SCFM capacity at 45F outlet PDP, 1/2 to 2" NPT connection, 210F maximum inlet air temperature, 24 to 120F ambient temperature range, 200 PSIG pressure rating,.21 to 2.68 kW power consumption, 115/1/60 or 230/1/60 voltage, Class 6 outlet PDP in accordance ...more

Wheeler Machinery Sales has 2 more listings in Refrigerated Compressed Air Dryers.

Ring and Circle Shears

3 Results

Niagara #11 R & C, Powered Ring & Circle Shear, 16 gauge Mild steel, 11 R & C

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Niagara
Model: 11
Niagara 11 R&C Powered Ring & Circle Shear #7206 #1, Capacity: 16 Ga. Mild Steel, Circle diameter from Square Blanks: 3-1/2 in to 22 in., Throat, Cutters to Frame: 9-1/4 in., Throat of Circle Arm: 16 in., Diameter of Cutters: 1-5/8 in., Electrics: 1/2 HP, Approx. Floor Space: 14" x 48-1/2" x 48" (with floor ...more

Wheeler Machinery Sales has 2 more listings in Ring and Circle Shears.

10 KVA Acme #0-24-10, Rocker Arm Type Spot Welder, foot pedal, timer, water cooled tips, 0-24-10

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Acme
Model: 0-24-10
Acme 0-24-10 Rocker Arm Type Spot Welder - 10 kVA #7208 #1, KVA Rating: 10, Throat Depth: 24", Throat Gap: 5", Weight: 2,250 lbs., Rocker Arm Type Foot Pedal, Timer, Water Cooled Tips.

Wheeler Machinery Sales has 3 more listings in Rocker Arm Welders.

5 Stand, Lockformer Pittsburgh 20 Ga. Rollformer, 25 FPM

Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Lockformer Pittsburgh 20 Ga. Rollformer #6807 #1, Forming Stations - 5, Lock: Pittsburgh, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.

Wheeler Machinery Sales has 4 more listings in Rollformers.

36 acfm, 125 psig, Sullair #6E, Rotary Air Compressor, 10 HP

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Sullair
Model: 6E
Sullair 6E Rotary Air Compressor #7086 #1, Main Motor: 10 HP, Nominal Operating Pressure: 125 Psi, Operating Speed of Motor: 1,740 RPM, Air Flow: 36 ACFM @ 125 PSIG.

Wheeler Machinery Sales has 8 more listings in Rotary Screw Air Compressors (Positive Displacement).

Rotary Table Surface Grinders - Horizontal Spindle

2 Results

Arter #A-12, rotary surface grinder, 12" wheel diameter, 14" table diameter, s/n 55 3547

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Arter
Model: A-12
Arter A-12 Rotary Surface Grinder 12" #6104 #1, Max diameter wheel 12", Table diameter 14", degree of tilting table +/- 12 degrees, power 220 / 440 volt 3 phase, machine weight 3500 lbs..

Wheeler Machinery Sales has 1 more listing in Rotary Table Surface Grinders - Horizontal Spindle.

Rotary Table Surface Grinders - Vertical Spindle

3 Results

Blanchard #11-16, vertical rotary surface grinder, 16" chuck, 20" swing, 11" wheel diameter, 1200 RPM

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Blanchard
Model: 11-16
Blanchard 11-16 Vertical Rotary Surface Grinder 16" x 11" #6468 #2, Serial # 4077, CHUCK DIAMETER: 16", SWING INSIDE GUARDS: 20", HEIGHT UNDER NEW WHEEL: 7", MAX. WEIGHT OF WORK LOAD ON CHUCK: 2,000 LBS, GRINDING WHEEL DIAMETER: 11", WHEEL SPEED: 1,200 RPM, CHUCK SPEEDS: 15 TO 64 RPM, INF. VARIABLE POWER DOWNFEED: ...more

Wheeler Machinery Sales has 2 more listings in Rotary Table Surface Grinders - Vertical Spindle.

50 HP U.S. Motors Air #US50D, Rotary Vane Screw Compressor, 230 cfm, 100 psi, #6252

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: U.S. Motors
Model: US50D
US Air Model US50D Rotary Vane Screw Compressor #6252 #2, Main Motor: 50 HP, Nominal Operating Pressure: 100 PSI, Nominal Air Flow: 230 CFM, Electrics: 220/440 Volt, 3 Phase, Bluetooth Technology, Direct Drive, Beltless Design, VSD Compressor with Low RPM Air End.

Scales

2 Results

1000 lb. Fairbanks-Morse #1124-A, Portable Beam Utility Scale

Category: Scales
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Fairbanks Morse
Model: 1124-A
Fairbanks Morse 1124-A Portable Beam Utility Scale #7180 #2, Capacity x Readability: 1,000 x 0.2 lb, Legal for Trade: NTEP CC# 88-266, MC #AM-4657, Construction: Cast Iron, Column: Fabricated steel, Pan Size: 23.5 x 17.75, Wheels : 5.0 Diameter, Cast Iron.

Wheeler Machinery Sales has 1 more listing in Scales.

20 Ton, 4 oz., Morgan #G-100T, Vertical Injection Molder, 12000 psi, 0-800° F, G-100T

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Morgan
Model: G-100T
Morgan G-100T Vertical Injection Molder #7222, Materials: Thermoplastics, Machine :, 6 cu in/4oz, 20 Ton Clamping Pressure, 12,000 psi injection pressure, 8x11x7.5 mold area, 0-800 F (430 C), Accessories:, Heated bed, injection speed control, antidrool nozzle, digital model of machine available, Design Limitations:, 6 ...more

Wheeler Machinery Sales has 2 more listings in Screw Type Injection Molding Machine.

Koch #VH-20, Vacuum Sealer, 22.5" seal bar width, 17.5" seal bar length, Stainless Steel, 40 psi, 1997

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Koch
Model: VH-20
Year: 1997
1997 Koch VH-20 Vacuum Sealer #6798 #1, Seal bar width: 22.5 inches, Seal bar length: 17.5 inches, Stainless steel construction, Air assist maximum: 40 PSI, Mounted to casters.

Sewing Machines

2 Results

Acme #H-12C Silver Stitcher Box Stitcher, 12" throat, 5-1/2' height, 1/4 HP, manual kick trip

Category: Sewing Machines
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Acme
Model: H-12C
Acme H-12C Silver Stitcher Box Stitcher #7147 #2, Throat Depth: 12", Height: 5-1/2' Tall, Electric Motor: 1/4 HP, Manual Kick Trip.

Wheeler Machinery Sales has 1 more listing in Sewing Machines.

Duro Dyne #LS2, liner sizer, up to 60" roll width, up to 40" roll diameter, 1/2" to 2" liner thickness

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Duro Dyne
Duro Dyne LS2 Liner Sizer #7209 #2, Roll Width: Up to 60, Roll Diameter: Up to 40, Liner Thickness: 1/2 through 2, Liner Density: 1/2 through 2 1-1/2 to 6 lbs. density, Slitters: Up to 5.

Wheeler Machinery Sales has 3 more listings in Sheet Metal - Miscellaneous.

22 gauge Pexto #544-A, Combination Rotary Beader, #6405 #2

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pexto
Model: 544-A
Pexto 544-A Combination Rotary Beader 22 Ga. #6405 #2, Capacity (Mild Steel): 22 Ga., Distance Between Shaft Centers" 2".

Wheeler Machinery Sales has 4 more listings in Sheet Metal Beaders, Rollers and Crimpers.

Sheet Metal Box and Pan Brakes

1 Result

Dreis & Krump #612-6, Box & Pan Brake, 612-6

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dreis & Krump
Model: 612-6
Dreis & Krump 612-6 Box & Pan Brake #7214 #2, Bending Length: 6Capacity:-12 Gauge Mild Steel (.105)-10 Gauge Soft Aluminum (.135)-16 Gauge Stainless (.06)Finger Extension Depth: 6 (Max Depth of Box Forming)Dimensions: 117L x 53W x 60HWeight: 2,670 lbs..

Mite-E-Smith #2036DVP, double vertical cleat bending system, foot switches, mounted vertically on table

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Mite-E-Smith
Model: 2036DVP
Mite-E-Smith 2036DVP Double Vertical Cleat Bending System #7207 #1, Material Capacity: 20 Ga., Length: 36", Max. Weight of Duct: 500 lb., Style: Double End Vertical, Foot Switches, Mounted Vertically on Table.

Single Crank OBI Flywheel Press Machines

6 Results

5 Ton, Benchmaster #Series-50, Bench OBI Press, 1-1/4" stroke, #6400 #2

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Benchmaster
Model: SERIES 50
Benchmaster Series 50 Bench OBI Press 5 Ton x 1 1/4" #6400 #2, Ram Stroke: 1 1/4", Ram Adjustment: 1", Shut Height: 6 3/4", Bed Size (L-R, F-B): 8" x 6", Ram Size (L-R, F-B): 3 1/4" x 2 5/16", Throat Depth: 3 1/2", Opening Through Back Housings: 3 1/2", Strokes Per Minute: 250, Motor: 1/3 HP Single Phase, Hand Trip ...more

Wheeler Machinery Sales has 5 more listings in Single Crank OBI Flywheel Press Machines.

Single End Hydraulic Punch Machines

2 Results

30 Ton, Strippit #Super-30/30, Single End Punch, 30" throat, 1 HP, punches & dies

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Strippit
Model: SUPER 30/30
Strippit Super 30/30 Single End Punch 30 Ton #6525 #2, TONNAGE: 30 TON, THROAT DEPTH: 30", MAXIMUM HOLE DIAMETER: 3.5" DIA. IN 12 GA., MAXIMUM MATERIAL THICKNESS: 1" DIA. IN.250, TABLE SIZE: 72" W X 48" D, SHEET SIZE: 30" X 30", STROKE LENGTH: 5/8", HITS PER MINUTE: 165, MOTOR. 1 HP, SHIPPING WEIGHT: 6,500 Lbs. ...more

Wheeler Machinery Sales has 1 more listing in Single End Hydraulic Punch Machines.

Single Spindle Drill Presses

7 Results

9" Clausing #1800, single spindle drill press, 12" x14" adj. heightt tilting work table

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Clausing
Model: 1800
Clausing 1800 Single Spindle Drill Press #6802 #1, 18" Swing, 9" Throat Depth, 12" x 14" Adjustable Height Tilting Work Table, 6" Hand Quill Feed, No. 3 Morse Taper Spindle, 3/4 HP Motor 1725 RPM, 5 Speeds 390 - 3000 RPM.

Wheeler Machinery Sales has 6 more listings in Single Spindle Drill Presses.

Sliding & Gap Bed Lathes

13 Results

12"/18" x 36" Husky #PC-36, Engine Lathe, 1.57" bore, KDK toolholder, tailstock, 50-1200 RPM

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Husky
Model: PC-36
Husky PC-36 Engine Lathe 12" x 36" #7096 #1, Swing Over Bed: 12 in., Distance Between Centers: 37 in., Swing Over Cross Slide: 6-3/4 in., Swing Over Saddle: 6-1/2 in., Swing Over Gap: 18.88 in., Compound Travel: 3-1/2 in., Carriage Travel: 31-1/2 in., Cross Slide Travel: 6 in., Spindle Bore: 1.57 in., Spindle Taper: ...more

Wheeler Machinery Sales has 12 more listings in Sliding & Gap Bed Lathes.

14 gauge x 3' Pexto #416-3, sheet metal roll, 3" diameter roll, 1.5" forming radius

Category: Slip Rolls
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pexto
Model: 416-3
Pexto 416-3 Sheet Metal Roll #7113, Maximum capacity, mild steel: 14 ga/ 2.00 mm, Maximum forming length: 36 in/ 915 mm, Roll diameter: 3 in/ 76 mm, Minimum forming radius: 1.5 in/ 38 mm, Gearing ratio: 4:01, Wiring grooves: 3/8, 1/2, 5/8/ 9.5, 12.5, 15.5 mm, Weight: 720 lbs, Dimensions: 69 19 19.

24.25" Wilder #1624, Sheet Metal Slitter, 90 FPM, Right to Left Feed Direction

Category: Slitters
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Wilder
Model: 1624
Wilder 1624 Sheet Metal Slitter #7184 #2, Capacity: 16 Gauge, Mild Steel, Max. Slitting Width: 24 1/4, Min. Slitting Width: 1 1/4, Feed Direction: Right to Left, Slitting Speed: 90 FPM, Shaft Diameter: 1 1/2, Side Wall Thickness: 1 Steel Plate, Motor: 3/4 HP / 110v / 1ph.

Straight Side Double Crank (Single Action) Press Machines

4 Results

60 Ton, Rousselle #6SS44, 2" stroke, 14" Shut Height, 22" x44" Bed, 50 SPM, air clutch/brake, #5172

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Rousselle
Model: 6SS44
Rousselle 6SS44 Straight Side Double Crank Press 60 Ton #5172 #1, Tonnage: 60 Ton, Ram Stroke: 2", Ram Shut Height: 14", Ram Adjustment of Slide: 3", Strokes Per Minute: 50, Area of Bed: 22" x 44", Opening in Bed: 12" x 36", Bed to Floor: 33", Area of Ram: 14" x 40", Opening Between Uprights Front to Back: 12" ...more

Wheeler Machinery Sales has 3 more listings in Straight Side Double Crank (Single Action) Press Machines.

Stretch Forming Machines

1 Result

20 Ton, Cyril Bath #V-20, CNC dual parts extrusion stretch wrap forming press machine

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Cyril Bath
Model: V-20
Used CYRIL BATH CNC HORIZONTAL STRETCH WRAP FORMING PRESS, Model V-20, Serial Number M10307, Mfg. 2003, Over $750,000 new., TWO SET OPPOSING JAWS (TWIN TENSION JAWS), SHALLOW ARK., SINGLE PLANE, DISTANCE BETWEEN PRIMARY JAWS:, Minimum 140" (3,556mm), Maximum 168" (4,267.2mm), DISTANCE BETWEEN SECONDARY JAWS:, Minimum ...more

Pro-Weld #CD-212 Stud Welder

Category: Stud Welders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: CD-212
Pro Weld CD-212 Stud Welder #6696 #1, DIMENSIONS: 8-1/2" H x 9" W x 11-3/4" D, STUD RANGE: 14 GA. - 1/4", WEIGHT: 26 LBS., CAPACITANCE: 66,000 MFD, CHARGE RANGE: 45-200 VDC, MODE: Contact Gap (optional), WELD RATE: 12 Studs/Min., INPUT POWER: 110 VAC, 60 Hz, 20 Amps, GROUND CLAMP, POWER SUPPLY, SLIM LINE CD GUN.

Wheeler Machinery Sales has 1 more listing in Stud Welders.

Swaging Machines (Swagers)

1 Result

No. 312 Torrington, Rotary 2-die Swaging Machine, 7/8" Capacity, #7010 #1

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Torrington
Model: 312
Torrington 312 Rotary 2-Die Swaging Machine 7/8" Capacity #7010 #1, TYPE: 2 DIE ROTARY, CAPACITY, -SOLIDS: 3/8" (9.5mm), -TUBING: 7/8" (22.2mm), DIE SIZE, -WIDTH: 1.187" (30.1mm), -LENGTH: 2.500" (63.5mm), -HEIGHT: 1.175" (29.8mm), FLOOR SPACE: 30 5/8" (777.9mm) W X 34 7/8" (885.8mm) LG, WEIGHT (APPROX): 2500 LBS ...more

Swiss Type and Lathe CNC Automatic Screw Machines

5 Results

Star #SV-20, CNC Swiss lathe, Fanuc 16T, 500 - 10000 rpm, 1" spindle bore diameter, 8 station turret

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Star
Model: SV-20
Star SV-20 CNC Swiss Automatic Lathe #6673 #2, CNC Control: Fanuc 16T, Max Turning Diameter: 20mm (25/32"), Headstock Stroke: 8", Main Spindle:, Headstock Spindle Speeds: 500 - 10,000 rpm, Spindle Indexing:.01 deg (full C-axis), Spindle Motor: 3.7Kw (cont)/5.5kw (30 min) main, Spindle Bore Diameter: 1", Drilling ...more

Wheeler Machinery Sales has 4 more listings in Swiss Type and Lathe CNC Automatic Screw Machines.

3 HP Quincy Vertical Air Compressor, 12 CFM, 125 psi, 80 gallon tank

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Quincy
Quincy Vertical Air Compressor 3 HP x 12 CFM #6517 #1, CFM Rating: 12, PSI Rating: 125, Motor: 3 HP, Tank Size: 80 Gallon.

Speedycut #BT1-203, Tapper

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Speedycut
Model: BT1-203
Speedycut BT1-203 Tapper #6713 #1, Capacity: #0 to 1/2" NC, Table Size: 8 7/8" X 9", Maximum Stroke: 1 3/4", Throat Depth: 6 1/2", Head Travel: 10 1/4", Maximum Head to Table: 11 13/16", Space Required: 24" X 13" X 26", Maximum Strokes per Minute: 65, Repeatability of Stroke: 1/5 of Pitch Thread, Electrical: 1/2 HP ...more

Lincoln #Square-Wave-275, TIG Welder w/ Tweco Cooler

Category: Tig Welders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lincoln
Model: SQUARE-WAVE-275
Lincoln Squarewave 275 TIG Welder w/ Tweco Cooler #7107 #2, Max Amps: 275 Amps @40% Duty Cycle, Rated Amperage and Duty Cycle: 150 Amps @ 100% Duty Cycle, Electrics: 208/230/460 Volt, Single Phase, Main Unit Approx Weight: 350.00 lbs, Main Unit Dimensions (in inches): Length: 32.00" Width: 41.00" Height: 29.00" ...more

Wheeler Machinery Sales has 3 more listings in Tig Welders.

Cincinnati #2, Tool & Cutter Grinder, 10" swing over table, 6" Longitudinal travel, 2

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Cincinnati
Model: 2
Cincinnati #2 Tool & Cutter Grinder #7220 #1, Swing Over Table: 10", Longitudinal Travel: 6, Swivel Angle: 50 Degree L & R, Table Graduation On End For Taper Grinding: 14 Degree L & R, Cross Movement Of Saddle: 9-1/2, Vertical Movement Of Wheel Head: 11, Work Head Swivels: 50 Degree L & R, Work Head ...more

Wheeler Machinery Sales has 4 more listings in Tool and Cutter Grinders.

Tube and Pipe Benders

1 Result

6" Coast Iron Machine Works #6RD, Tube Pipe Bender, #6360

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Coast Iron
Model: 6RD
Coast Iron Machine Works 6RD Tube Pipe Bender 6" #6360 #1, BENDING CAPACITY:, CARBON STEEL PIPE: 6" X SCH 80, STAINLESS STEEL PIPE: 6" X SCH 40, BENDING FORCE: 100 TONS, BENDING SPINDLE TORQUE: 157,000 FT Lbs., BENDING FORCE: 100 Ton, MAXIMUM BEND RADIUS: 5XD ON MAX CAPACITY, MAXIMUM BEND ANGLE: 180 + 15 SPRINGBACK ...more

Tumble Blast Cleaning and Shot Peening

1 Result

Krumm #RK1600VA, High Pressure Cleaning Unit For Cleaning Prototypes

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Krumm
Model: RK1600VA
Used 2014 Krumm High pressure cleaning unit for cleaning prototypes RK1600VA., Here is some informatin from the manufacturers website:, The RK 1600 VA is a cleaning unit for high and low pressure cleaning, dissolvents and alcohol. Its standart model comes with two doors for loading and unloading, two mounting flanges ...more

Turntable Parts Washers

1 Result

Hydro-Blast #175, Aqueous Parts Washer, 60" load height, 44" turntable diameter, low water shut off

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hydro-Blast
Model: 175
Hydro-Blast 175 Aqueous Parts Washer #6899 #2, Load Height: 60, Turntable Diameter: 44, Load Capacity: 2,500 lbs., kW of Heat: 30 kW, Pump HP: 7.5 HP, Power Req.: (240V, 1p, 182amp) (240V, 3p, 104amp) (480V, 3p, 52amp), Dimensions: W x 66 D x 54 H x 113 (Includes Stack Height), Flow Rate: 210 GPM, Spray Bar Pressure: ...more

8 Ton, Rotex #18A, Hand Operated Turret Punch, 18" throat, 18 station, S/N 20318

Category: Turret Punches
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Rotex
Model: 18A
Rotex 18-A Hand Operated Turret Punch #7175 #1, Capacity: 8 Tons, Throat Depth: 18, Tooled Stations: 18, Punch Range: 1/8 2, Punch Sizes:, 1/8, 5/32, 3/16, 7/32, 9/32, 5/16, 3/8, 5/8, 7/8, 1, 1 1/8, 1, 1, 2, 2, Actuation: Hand Actuated, Ship Wt. (Approx.): Approx. 530 lb., Ship Dimensions: Approx. 30x37x58.

Wheeler Machinery Sales has 1 more listing in Turret Punches.

600 lb. PA Industries #SRA-600-D, single end coil reel, 8" wide, 36" outside dimensions, 8"-18" ID, 0-28 RPM

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pa Industries
Model: SRA-600-D
PA Industries SRA 600-D Single End Coil Reel 600 Lb. #6866 #1, Maximum Coil Weight: 600 Lb., Maximum Stock Width: 8, Min/Max ID: 8" - 18, Maximum OD: 36, Maximum Speed: 0 - 28 RPM, Main Motor: 1/8 HP.

Wheeler Machinery Sales has 1 more listing in Uncoilers and Centering Coil Reels.

Universal Cylindrical Grinding Machines

1 Result

8" x 16" Tschudin #HTG-420, universal cylindrical grinder, power table traverse, automatic infeed

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Tschudin
Model: HTG-420
Tschudin HTG-420 Universal Cylindrical Grinder 8" x 16" #6530 #1, NOMINAL SWING: 8", DISTANCE BETWEEN CENTERS: 16", TABLE SPEED: 0- 195" IPM, TABLE DWELL: 0- 6 SECONDS, SWIVELLING RANGE: +/- 11 DEGREES, WHEEL SIZE: 14"DIA. X 2"W X 5"BORE, SWIVELLING RANGE: +/- 5 DEGREES, MOTOR: 4 HP, SPINDLE SPEEDS (3): 1,640- 1,940- ...more

Diamond Multimax #22M, Horizontal Production Mill, 5-3/4" x 24", #6283

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Diamond Multimax
Model: 22M
DIAMOND 22M HORIZONTAL PRODUCTION MILL 5 3/4" X 24" #6283 #1, Table Size: 5 3/4" x 24", Longitudinal Table Travel: 14", Cross Saddle Travel: 5 1/2", Vertical Knee Travel: 15", Spindle Speeds (9): 85- 1,500 RPM, Spindle Taper: #9 B & S, Motor: 1 HP Single Phase, Weight: 1,000 Lbs., Pneumatic Table Feed, Arbor.

Wheeler Machinery Sales has 1 more listing in Universal Milling Machine - Horizontal.

Vacuum Pumps

1 Result

268 ACFM, Powerex #C6S-7524DP3, Duplex Vacuum Pump, 7.5 HP, 1725 RPM, 200 gallon tank

Category: Vacuum Pumps
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Powerex
Model: C6S-7524DP3
Powerex C6S-7524DP3 Duplex Vacuum Pump #6810 #1, Main Motors: 7.5 HP (2), ACFM: 268, RPM: 1,725, Tank Size: 200 Gal, Voltage: 220/440 V, Amp Draw: 21.6/10.8 A, Hankinson Air Dryer.

7" x 6" Jet #JWBS-14CS, Vertical Bandsaw Woodworking

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Jet
Model: JWBS-14CS
Jet JWBS-14CS Vertical Bandsaw Woodworking 14" #6479 #1, Swing: 14", Throat Depth: 7", Max. Work Height: 6", Table Size (Tilting): 15" x 15", Table Tilt: 10 Left, 45 Right, Blade Speed: 3,000 FPM, Maximum Blade Width: 3/4", Blade Length: 93-1/2", Resaw Capacity: 6", Dust Collection: 4" Port, Motor: 1 HP Single Phase ...more

Wheeler Machinery Sales has 12 more listings in Vertical Band Saws.

Acra #BMV1000, CNC vertical machining center, 20 automatic tool changer, 40" X, 24" Y, 24" Z, 8000 RPM, CAT40, Fanuc Oi-MC, 2006

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Acra
Model: BMV1000
Year: 2006
2006 Acra BMV1000 Vertical Machining Center #6788 #2, Table Size: 22" x 48", Tool Changer: 20 ATC, Travels:, X=40", Y=24", Z=24", Spindle Taper: CAT 40, Spindle Speed: 0 - 8,000 RPM, Feed Rate: 400 IPM, Fanuc Series OI-MC CNC Control, Screw Type Integrated Auger, 20 HP Drive Motor.

Wheeler Machinery Sales has 19 more listings in Vertical CNC Machining Centers.

9 cu.ft. Almco #OR-10VHE, Vibratory Finisher, 800-1400 VPM, variable speed, 5 HP, timer, E-stop

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Almco
Model: OR-10VHE
Almco OR-10VHE Vibratory Finisher 9 cu ft. #6912 #1, CAPACITY: 9 CU FT, FOOT SPACE SIZE: 71" X 52" X 48" HIGH, REMOVAL DIVIDERS: NO, FREQUENCY: 800-1400 VPM, VARIABLE SPEED: YES, SOUND BARRIER TOP: YES, SLURRY SPRAY: YES, TIMER: YES, E-STOP: YES, MOTOR: 5 HP.

Washer Parts - Miscellaneous

3 Results

Austin American Technology, Aqua Therm 9100 Batch Cleaner

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: AUSTIN AMERICAN TECHNOLOGY
Austin American Technology Aqua Therm 9100 Batch Cleaner #6909 #1, Process Control, EPROM Based LCD Interface11 Programmable RecipesProgrammable Steam CyclesConductivity Testing (0-500uS)High Temperature Operation, 199F (93C) Wash and Rinse Operation150F (73C) Drying OperationHigh Pressure Wash, Coherent Jet ...more

Wheeler Machinery Sales has 2 more listings in Washer Parts - Miscellaneous.

Waterjet Cutters

4 Results

Flow #A12797, CNC waterjet, 6' x 12' table, Dynamic Anti-Kirf Cutting Head

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Flow
Model: A12797
FLOW No. A12797 CNC WATERJET 6' X 12' Table, 55 KPSI, Dynamic Anti-Kirf Cutting Head, Preliminary - Subject to Verification:, Table Size: 6' x 12', Z Axis: 8", Flow Dynamic Cutting, Pedestal Mounted Control, Pasar Cutting Head, Flow Serve Software, Garnet Hopper, Splash Guards, Konstant Kooler Chiller.

Wheeler Machinery Sales has 3 more listings in Waterjet Cutters.

Weld head locator, Jetline #WHL-4C6X6K, & 3000 lb. Pandjiris welding positioner

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Jetline
Model: WELD HEAD LOCATOR
Jetline WHL-4C6X6K Weld Head Locator and 3,000 Lb. Pandjiris Welding Positioner #6955 #2, Jetline Weld Head Locator, Capacity on Boom End: 500 Lb., Boom Horizontal Travel: 72", Boom Vertical Travel: 72", Overall Height: 121", Overall Width: 125", Base: 80" x 80", Vertical Column Speed: 50 IPM, Boom Travel Speed: 2 - ...more

Wheeler Machinery Sales has 1 more listing in Welding Machine Parts and Miscellaneous.

Welding Positioner, 12" (Non-Tilt) Powered 110V

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Welding Positioner 12" (Non-Tilt) Powered 110V #7164 #2, SPECIFCIATIONS:, Table Size: 12", Main Motor: 1/2 HP, Voltage: 110V, single phase, A bit of a homemade item, well put together..

Artos #MTX-Series-5, Wire Processing Line, 2002

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Artos
Year: 2002
2002 Artos MTX Series 5 Wire Processing Line #7073 #2, Cut, strip, terminate, 5 station machine configured with (2) presses, Wire Size: 0,15 to 6 mm2 (26 to 10 AWG), Wire Cut Lengths: 51mm to 100M (2 t o3938), Wire Stripping Lengths: 0 to 12.7mm (0 to 0.5), Wire Feed Rate (Max): 5M/Sec (197 inches/Sec.), Weight: ...more

GF Agie Charmilles #Cut-20P, CNC Wire Electrical Discharge Machine, 13.8" X, 9.8" Y, 9.8" Z, 8500 RPM, 2010

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gf Agie Charmilles
Model: CUT-20P
Year: 2010
2010 GF Agie Charmilles Cut 20P CNC Wire EDM #7135, Tank Size: 41.3" x 30.1" x 22", Table Size: 27.55" x 18.89", Inside Tank: 33.4" x 26.8", Max. Workpiece Dimensions: 33.43" x 26.77" x 9.84", Max. Workpiece Weight: 882 lbs, Axis Travels:, - X-Axis: 13.8", - Y-Axis: 9.8", - Z-Axis: 9.8", - U / V Axis: +/- 1.7", Max. ...more

Wheeler Machinery Sales has 1 more listing in Wire EDM Machine.

Nilson #751, 4-slide machine, dual slide-coining, 3/4 wide strip, rebuilt, 40-400 SPM

Category: Wire Formers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Nilson
Model: 751
NILSON 751 FOUR SLIDE MACHINE - REBUILT / MUST SEE 1/16"- 3/4" #6134 #1, Rebuilt this year., Mfg. date - 5-72, Capacity 3/4 wide strip, Capacity- 1/16 wire dia., Std feed length 3, SPM 40-400, Sides 1 stroke, Back slide 3/4 stroke, Press- 3/16 stroke, Die set length 4, Tonnage 2, Split shells, Weight: 1,000 lbs ...more

Wheeler Machinery Sales has 1 more listing in Wire Formers.

12" x 36" Craftsman #113.23851, Woodworking Lathe, 875-3450 RPM, sliding rail system, tailstock

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Craftsman
Model: 113.23851
Craftsman 12" Woodworking Lathe #6886 #1, Swing Over Bed: 12", Distance Between Centers: 36", Spindle Speeds: 875 to 3,450 RPM, Main Motor: 1/3 HP, Voltage: 110V, Sliding Rail System, Mounted on a Bench, Center Tool Holder, Tail Stock.

12" Sears Craftsman #112-1981, wood planer, 1 HP, mounted on a wood stand

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Sears Craftsman
Model: 112-1981
SEARS CRAFTSMAN 112-1981 12" Wood Planer #7043 #1, Width of Blade: 12", Maximum Height Under Blade: 6:, Main Motor: 1 HP, Mounted on a Wood Stand.

Delta, 10" Table Saw, 5/8" arbor diameter, 3450 RPM, straight cutting fence

Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Delta
Delta 10" Table Saw #7158 #1, Blade Diameter: 10, Arbor Diameter: 5/8, Arbor Speed: 3450 RPM, Straight Cutting Fence.

Wheeler Machinery Sales has 1 more listing in Woodworking Saws.