1 / 6
Click to zoom in
1 / 6
For Sale by Mohawk Machinery Inc
Surplus Record Dealer Since 1956
Location: Cincinnati, OH
Contact Mr. Secord
Phone Number: 513...> Show Phone Number 513-771-1952
Let the seller know you found their listing on Surplus Record!
$24,500 USD
Finance for as low as $497/mth 
Description
32" x 96" LEBLOND "REGAL" ENGINE LATHE w/TAPER ATTACHMENT
Serial No 3H919, Model 24 Raised, Series "REGAL"
32" x 96" LEBLOND "REGAL" ENGINE LATHE w/TAPER ATTACHMENT
Serial No 3H919, Model 24 Raised, Series "REGAL"
EQUIPPED WITH:
Taper Attachment
Servo-Shift Preselect Speed Change
3" Factory Installed Risers
18" 4-Jaw Chuck w/Jaws - 9" 3-Jaw Chuck w/Jaws
Turret Depth Stops - Steady Rest - Tool Post
Replaceable Hardened & Ground Ways
Threading Dial - Full Length Coolant-Chip Pan
CATALOG SPECIFICATIONS:
Hole Thru Spindle 2.2"
Swing Over Bed Ways, Actual 32"
Swing Over Cross-Slide 24.25"
Distance Between Centers 96"
Cross-Slide Cross-Feed Travel 13"
Compound Rest Travel 4.75"
Tailstock, Spindle Diameter 3.125"
Tailstock Spindle Center #5 MT
Tailstock, Spindle Travel 7.5"
(12) Spindle Speeds, Range 18 to 720 RPM
(48) Carriage Longitudinal Feeds .0036 to .205 IPR
(48) Thread Changes, Range 2 to 112 TPI
Electrical System 220-440/3/60
Floor Space Required, L x D 14'2" x 4'4"
Weight, Approximately 10000 LBS
F.O.B. OUR WAREHOUSE
Serial No 3H919, Model 24 Raised, Series "REGAL"
32" x 96" LEBLOND "REGAL" ENGINE LATHE w/TAPER ATTACHMENT
Serial No 3H919, Model 24 Raised, Series "REGAL"
EQUIPPED WITH:
Taper Attachment
Servo-Shift Preselect Speed Change
3" Factory Installed Risers
18" 4-Jaw Chuck w/Jaws - 9" 3-Jaw Chuck w/Jaws
Turret Depth Stops - Steady Rest - Tool Post
Replaceable Hardened & Ground Ways
Threading Dial - Full Length Coolant-Chip Pan
CATALOG SPECIFICATIONS:
Hole Thru Spindle 2.2"
Swing Over Bed Ways, Actual 32"
Swing Over Cross-Slide 24.25"
Distance Between Centers 96"
Cross-Slide Cross-Feed Travel 13"
Compound Rest Travel 4.75"
Tailstock, Spindle Diameter 3.125"
Tailstock Spindle Center #5 MT
Tailstock, Spindle Travel 7.5"
(12) Spindle Speeds, Range 18 to 720 RPM
(48) Carriage Longitudinal Feeds .0036 to .205 IPR
(48) Thread Changes, Range 2 to 112 TPI
Electrical System 220-440/3/60
Floor Space Required, L x D 14'2" x 4'4"
Weight, Approximately 10000 LBS
F.O.B. OUR WAREHOUSE
Inquire Further with Mohawk Machinery Inc!
Buyers Who Viewed This Listing Also Viewed:
32" x 96" Leblond #Regal, Engine Lathe, 2.2" Bore, 4.75" Compound rest, 720 RPM
Category: Engine Lathes
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Leblond
Model: REGAL
Engine lathe s a 32" swing and 96" centers. a taper attachment, risers, chucks, and more. Offers 12 spindle speeds up to 720 RPM., Hole Thru Spindle 2.2", Swing Over Bed Ways, Actual 32", Swing Over Cross-Slide 24.25", Distance Between Centers 96", Cross-Slide Cross-Feed Travel 13", Compound Rest Travel 4.75" ...more
35.1" x 90" Sunmaster #CH-2690, Engine Lathe, 4" spindle bore, 15 HP, 1200 RPM, 2025
Category: Engine Lathes
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Sunmaster
Model: CH-2690
Year: 2025
Swing Over Bed: 26", Swing Over Cross Slide: 17.5", Swing in Gap: 35.1", Gap Width: 10.6", Distance Between Centers: 90", Bed Width: 15.7", Center Height: 42", Spindle Speeds: (12) 13 - 1200 RPM, Spindle Motor: 15 HP, Spindle Bore: 4-1/16", Spindle Taper and Center: MT-7 / MT-5, Spindle Nose: D1-11, Feed Ranges: 16 ...more
34" x 102" LeBlond, engine lathe, 15" 4-Jaw chuck, 24" 3-Jaw chuck, 1978
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Leblond
Year: 1978
Make: Leblond, Model: n/a, Year: 1978, Machine Location: Montana, Bed Length: 102″, Chuck Size: 15″ 4-Jaw, 24″ 3-Jaw, Swing Over Bed: 34″, Swing Over Cross Slide: 14″, Max Turning Diameter: 28″, Bar Capacity: 3.5″, Tailstock.
30" x 96" Monarch #25N, engine lathe, 2-1/4" spindle hole diameter, rapid traverse, 30 HP, #68037
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 25N
SERIAL. 39296, MODEL. 25N, MAXIMUM SWING OVER WAYS. 30-1/2", DISTANCE BETWEEN CENTERS. 96", SPINDLE SPEEDS. (24) 8 TO 405 RPM, FEEDS. (56).0038 TO.240 IP, THREADS. (56) 3/4 TO 46 TPI, DIAMETER OF SPINDLE HOLE. 2-1/4", HARD WAYS. YES, TRAVEL DIAL. YES, COOLANT WITH CHIP PAN. YES, RAPID TRAVERSE. YES, MOTOR. 30 ...more
30" x 96" Sidney, geared head engine lathe, 5-306 RPM, 24" 3-jaw, taper, from service
Category: Engine Lathes
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Sidney
