Mohawk Machinery Inc
Cincinnati, OH 45215-6330
Platinum Level Dealer
Surplus Record Dealer Since 1956
Contact
Mr. Secord
About
Mohawk Machinery Inc. has been an Industry leader in buying and selling quality machine tools worldwide for over 60 years. State-of-the-art facilities, including a 100,000 sq. ft. warehouse with two 25 ton cranes and a new 50,000 sq. ft. heated warehouse.Products & Services
- Automatic Screw Machines & Chuckers
- Boring Machines
- CNC Machinery
- Grinders, Cylindrical & Internal
- Lathes, CNC
- Presses
- Water Jet Cutting Machinery
- Welding Equipment
Associations & Affiliations
301 listings in 110 categories
4-Roll Plate Bending Machines
1 Result
144" x 3/8" Bertsch #8, 4-roll hydraulic plate bending roll, hydraulic hinge drop end, 15 HP, 14 FPM
Category: 4-Roll Plate Bending Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Bertsch
Model: 8
12' x 3/8" BERTSCH "8" 4-ROLL HYDRAULIC PLATE BENDING ROLL - Hydraulic Drop End -10 top roll diameter - 11" bottom roll diameter - 10 side rolls diameter - pre-bending capabilities, 12 x 3/8 BERTSCH DOUBLE-PINCH 4-ROLL HYDRAULIC PLATE BENDING ROLL, Serial No M-10772, Model 8, Hydraulic Hinge Drop End ...more
2" x 2" x 1/4" Roundo #SR-2, hydraulic horizontal angle bending roll, Leg In - Leg Out, 2006
Category: Angle Bending Rolls
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Roundo
Model: SR-2
Year: 2006
2" x 2" x 1/4" ROUNDO HYDRAULIC HORIZONTAL ANGLE BENDING ROLL, New 2006, Serial No 06815, Model SR-2, 2" x 2" x 1/4" ROUNDO HYDRAULIC HORIZONTAL ANGLE BENDING ROLL, New 2006, Serial No 06815, Model SR-2, Leg In - Leg Out, Hydraulic Roll Adjustment, Set of Rolls On Machine, Hand Held Pendant Control, CATALOG :, Bending ...more
Mohawk Machinery Inc has 4 more
listings in Angle Bending Rolls.
10 gauge x 10' Dreis & Krump #PB-10135, medium duty power apron leaf brake, motorized top adjustment, pneumatic power clamping
Category: Apron and Hand Brakes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Dreis & Krump
Model: PB-10135
10' x 10 GA DREIS & KRUMP MEDIUM-DUTY POWER, APRON LEAF BRAKE, Serial No 120109, Model PB-10135, 10' x 10 GA DREIS & KRUMP MEDIUM-DUTY POWER, APRON LEAF BRAKE, Serial No 120109, Model PB-10135, Motorized Top Adjustment, Pneumatic Power Clamping, CATALOG :, Bending Length 120", Bending Thickness 10 GA ...more
Mohawk Machinery Inc has 1 more
listing in Apron and Hand Brakes.
Automatic Drilling and Tapping Machines
1 Result
Kaukauna #140U, portable universal drill & tapping machine, 8' arm, 22" column diameter
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Kaukauna
Model: 140U
140U KAUKAUNA PORTABLE UNIVERSAL DRILL & TAPPING MACHINE, Serial No 170, Model 140U, 140U KAUKAUNA PORTABLE UNIVERSAL DRILL & TAPPING MACHINE, Serial No 170, Model 140U, Lifting Bail On Column Cap And Hinged Spreader, Arms On Runway For Portable Use, High Speed Spindle, Pendant Control, CATALOG :, Arm Length ...more
Bed and Knee Milling Machines - Horizontal
3 Results
Heckert, WMW #F4000VI/2, universal knee type horizontal mill w/2 arbor supports, 16" x63" table
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Heckert
Model: F4000VI/2
F400-VI/2 HECKERT (WMW) UNIVERSAL KNEE-TYPE, HORIZONTAL MILL, Serial No 137405189101 & 326536-233, Model F400-VI/2, F400-VI/2 HECKERT (WMW) UNIVERSAL KNEE-TYPE, HORIZONTAL MILL, Serial No 137405189101 & 326536-233, Model F400-VI/2, Universal Swiveling Table, Knee Motor - (2) Arbor Supports, Overhead Pendant ...more
Mohawk Machinery Inc has 2 more
listings in Bed and Knee Milling Machines - Horizontal.
Bed and Knee Milling Machines - Vertical
7 Results
Acer #Ultima-3VKH, vertical mill, 10" x50" table, 3 HP, Sony Millman 2-Axis digital read out, power quill feed
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Acer
Model: ULTIMA-3VKH
3HP ACER ULTIMA 3VKH VERTICAL MILL - Sony Digital Readouts - 10 x 50 Table, 3 HP ACER ULTIMA VERTICAL TURRET MILL, Serial No 9605457, Model 3VKH, Series ULTIMA, Sony MILLMAN LH51 2-Axis Digital Readouts, 3 HP Spindle Motor (Infinitely Variable Speeds), Power Quill Feed, One-Shot Lubrication System, CATALOG :, Table ...more
Mohawk Machinery Inc has 6 more
listings in Bed and Knee Milling Machines - Vertical.
25.6" x 103" Costa Levigatrici #MDTCCC650, dry type metal sander/grinder, PLC controller w/touch screen interface, 2018
Category: Belt Sanders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Costa
Model: MDTCCC650
Year: 2018
25.6 COSTA LEVIGATRICI MD7CC650 DRY-TYPE WIDE ABRASIVE BELT METAL SANDER GRINDER - (3) variable speed adjustable heads - AAF 3-1H dust collector - 2018, 25.6 COSTA LEVIGATRICI DRY-TYPE WIDE-BELT METAL SANDER/GRINDER, New 2018, Serial No MB831005A, Model MD7CCC650, ;, PLC Controller w/Touchscreen Interface, (3) 11 KW ...more
Boring Mills, Horizontal, Table Type
1 Result
4" Shibaura #BT-10BR1, table type horizontal boring mill, 44" x 49" built-in rotary table, 1981
Category: Boring Mills, Horizontal, Table Type
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Shibaura
Model: BT-10B-R1
Year: 1981
4" SHIBAURA "BT-10B-R1" TABLE-TYPE HORIZONTAL BORING MILL w/44 x 49 BUILT-IN ROTARY TABLE - ACU-RITE DIGITAL READOUTS - POWER DRAW BAR - FULL PENDANT CONTROL - Serial No 161073, 4" SHIBAURA TABLE-TYPE HORIZONTAL BORING MILL, New 1981, Serial No 161073, Model BT-10B-R1, Acu-Rite Digital Readout, 44" x 49" Built-In ...more
C Frame Hydraulic Press Machines (Gap Frame)
2 Results
75 Ton, Cincinnati #75 OBS CNC, quick die change system, bolster plate on side & on bed, .7" -8" stroke, 2000
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Cincinnati
Model: 75
Year: 2000
75 TON CINCINNATI-INC CNC GAP-FRAME HYDRAULIC PRESS, New 2000, Serial No 51814, Model 75 OBS, 75 TON CINCINNATI-INC CNC GAP-FRAME HYDRAULIC PRESS, New 2000, Serial No 51814, Model 75 OBS, Cincinnati Pendant Mounted Microprocessor Control, Quick Die Change System (Power Clamping For Tool Sets), 24" x 18" x 2-1/2" ...more
Mohawk Machinery Inc has 1 more
listing in C Frame Hydraulic Press Machines (Gap Frame).
36" width x 60" H x 36" D Grieve #CAH550, floor level electric cabinet type oven, 3-shelves, 550°F
Category: Cabinet Type Ovens
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Grieve
Model: CAH550
550-DEGREE GRIEVE "CAH550" ELECTRIC FLOOR LEVEL CABINET OVEN - (3) Shelves - Watlow PLC Control - Temperature Gauge -Horizontal Forced Convection Air Flow - Dual Doors, 550-DEGREE GRIEVE FLOOR LEVEL ELECTRIC, CABINET TYPE OVEN, Serial No 108084A0113, Model CAH550, Watlow PLC Control - Temperature Gauge, (3) ...more
Mohawk Machinery Inc has 1 more
listing in Cabinet Type Ovens.
4' width x 4' D x 5' H, Despatch #V-39HD, car bottom furnace, swing open doors w/heavy duty latch, 500°F
Category: Car Bottom Furnaces
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Despatch
500-DEGREE DESPATCH ELECTRIC CAR-BOTTOM OVEN, Serial No 53996, Model V-39HD, 500-DEGREE DESPATCH ELECTRIC CAR-BOTTOM OVEN, Serial No 53996, Model V-39HD, Updated Watlow "EZ-Zone PM Express" Controller, Updated ABB "Commander 1300" Recorder, Swing Open Doors w/Heavy Duty Latch, CATALOG :, Temperature Rating, Degrees ...more
Carbide, Friction and Cold Saws
1 Result
4.5" x 16" Trennjaeger #LPC110/400, hydraulic mitre angle cutting feature, horizontal & vertical clamping
Category: Carbide, Friction and Cold Saws
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Trennjaeger
Model: LPC110/400
LPC 110/400 TRENNJAEGER HYDRAULIC LONGITUDINAL, MITRE CIRCULAR COLD SAW, Serial No H 1752, Model LPC 110/400, LPC 110/400 TRENNJAEGER HYDRAULIC LONGITUDINAL, MITRE CIRCULAR COLD SAW, Serial No H 1752, Model LPC 110/400, MITRE Angle Cutting, Horizontal & Vertical Clamping, CATALOG :, Tube Stock Capacity @ 14" Saw ...more
Centering Machines (Milling and Facing and Centering Machines)
2 Results
8" x 108" Giddings & Lewis Endomatic #MC, double-end milling drilling chamfering boring & centering machine
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Giddings & Lewis
Model: MC
8" X 108" GIDDINGS & LEWIS "ENDOMATIC" DOUBLE-END, MILLING DRILLING CHAMFERING BORING & CENTERING MACHINE, Serial No FM-120, Model MC, Series "ENDOMATIC", 8" X 108" GIDDINGS & LEWIS "ENDOMATIC" DOUBLE-END, MILLING DRILLING CHAMFERING BORING & CENTERING MACHINE, Serial No FM-120, Model MC, Series ...more
Mohawk Machinery Inc has 1 more
listing in Centering Machines (Milling and Facing and Centering Machines).
Cincinnati Milacron Twin Grip No. 440-20, model DE, centerless grinder, 20" thru feed workrest
Category: Centerless Grinders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Cincinnati Milacron
Model: DE
Year: 1980
440-20 CINCINNATI-MILACRON "TWIN GRIP", CENTERLESS GRINDER - 30597, New 1980, Serial No 350720H79-003, Model DE, 20" Thrufeed Workrest, Automatic Power Roller Loader w/6" to 12" Diameter, Capacity (Spinner Type), Hydraulic Profile Grinding Wheel Truing w/Automatic, Diamond Advance, Hydraulic Profile Regulating Wheel ...more
Mohawk Machinery Inc has 3 more
listings in Centerless Grinders.
Chain Hoists, Monorail and Trolley Cranes
2 Results
2.2 Ton, Kone Cranes #EXN202005B4, electric chain crane hoist with motorized trolley, hook, pendant, 2016
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Kone
Model: EXN202005B4
Year: 2016
2.2 TON KONECRANES "EXN202005B4" ELECTRIC CHAIN CRANE HOIST w/MOTORIZED TROLLEY - HOOK - PENDANT, New 09/2016, Serial No 6104713, Class 1, Div 2, Group A,B,C,D T4, 2.2 TON KONECRANES CRANE HOIST, W/MOTORIZED TROLLEY, New 09/2016, Serial No 6104713, Type EXN202005B4, Class 1, Div 2, Group A,B,C,D T4, 2.2 Ton Konecranes ...more
Mohawk Machinery Inc has 1 more
listing in Chain Hoists, Monorail and Trolley Cranes.
48" Tolhurst #48, center slung heavy duty chip wringer centrifuge, lid with air operated lifting
Category: Chip Wringers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Tolhurst
Model: 48
48" TOLHURST 48 CENTER-SLUNG CHIP WRINGER CENTRIFUGE - 5 HP Motor, 48" TOLHURST CENTER-SLUNG HEAVY-DUTY, CHIP WRINGER CENTRIFUGE, Size 48, Heavy-Duty Lid w/Air-Operated Lifting, 24 Deep Basket, CATALOG :, Basket Diameter 48", Capacity Rating 14.8 CU FT, Load Capacity, Full Speed 1000 LBS, Basket Speed 1800 RPM, Motor ...more
4.72" Eisele #VMS350PV, semi-auto cold saw, clamping vise, 10' IEM feed system, 10' outfeed conveyor
Category: Circular Saws
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Eisele
Model: VMS350PV
Year: 1995
VMS350PV EISELE SEMI-AUTOMATIC CIRCULAR COLD SAW, New 1995, Serial No. 02008, Model VMS350PV, Model 4210P0089, VMS350PV EISELE SEMI-AUTOMATIC CIRCULAR COLD SAW, New 1995, Serial No. 02008, Model VMS350PV, Model 4210P0089, Clamping Vise, 10' IEM Feed System w/Rex Computer, 10' Outfeed Conveyor, CATALOG : ...more
Mohawk Machinery Inc has 1 more
listing in Circular Saws.
Circumferential (Circle) Seam Welders
1 Result
50 KVA H & H, resistance welders press type seam welder with Interlock 108 Microprocessor Control
Category: Circumferential (Circle) Seam Welders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: H & H
50 KVA H&H RESISTANCE WELDERS PRESS TYPE SEAM WELDER - 14 ram Length -, 50 KVA H&H RESISTANCE WELDERS PRESS TYPE SEAM WELDER, Interlock Industries "Model 108" Single Phase Microprocessor Control, Dart "250 Series" DC Variable Speed Drive, 50 KVA Dual RoMan Single Phase Transformer, (2) SMC Pinch Cylinders ...more
Circumferential and Longitudinal (Combo) Welders
2 Results
Jetline #LWC-144, 144" combination internal external longitudinal seam welder
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Jetline
Model: LWC-144
12 (144") JET-LINE LWC-144 COMBINATION INTERNAL EXTERNAL LONGITUDINAL SEAM WELDER - Raised Base - Miller & Jetliner Welding Equipment, 144" JETLINE COMBINATION INTERNAL EXTERNAL, LONGITUDINAL SEAM WELDER, Serial No 962029, Model LWC-144, Raised Base, Jetline "SWC-3A" Carriage w/Standard, Jetline Carriage Control ...more
Mohawk Machinery Inc has 1 more
listing in Circumferential and Longitudinal (Combo) Welders.
CNC Cylindrical Grinders
1 Result
12" x 24" Okamoto #OGM12-24U, CNC universal cylindrical grinder, Okamoto/Fanuc CNC Control
Category: CNC Cylindrical Grinders
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Okamoto
Model: OGM12-24U
12" x 24" OKAMOTO CNC UNIVERSAL CYLINDRICAL GRINDER, Serial No 6017, Model OGM12-24U, 12" x 24" OKAMOTO CNC UNIVERSAL CYLINDRICAL GRINDER, Serial No 6017, Model OGM12-24U, Okamoto/Fanuc CNC Control, Dead/Live Spindle Variable Speed Workhead, Automatic Lube System, Coolant Filtration System (Tank & Pump), CATALOG ...more
CNC Drilling and Tapping Centers
3 Results
Brother #TC-22B-0, CNC tapping center, 27.5" X, 17.72" Y, 16.14" Z, BT30,18 ATC, Brother 800 CNC Control, 2008
Category: CNC Drilling and Tapping Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Brother
Model: TC-22B-0
Year: 2008
#TC-22B-0 BROTHER 4-AXIS CNC TAPPPING CENTER, New 2008, Serial No 111548, Model TC-22B-0, #TC-22B-0 BROTHER 4-AXIS CNC TAPPPING CENTER, New 2008, Serial No 111548, Model TC-22B-0, Brother 800-CNC Control, #YNC-200L Yukiwa 4th Axis Rotary Table w/Tailstock, 18-Position Automatic Tool Changer, Thru-Spindle Coolant ...more
Mohawk Machinery Inc has 2 more
listings in CNC Drilling and Tapping Centers.
DMG, Gildemeister #CTX-620, CNC turning center, 26.4" swing, 15" chuck, Siemens 840D Control
Category: CNC Lathes and Turning Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Dmg
Model: CTX-620
Year: 2005
CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER, W/Y-AXIS & LIVE MILLING, New 2005, Serial No 80409390300, Model CTX620X1000, CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER, W/Y-AXIS & LIVE MILLING, New 2005, Serial No 80409390300, Model CTX620X1000, Siemens 840D CNC Control, 12(+4) Position VDI 50 Turret ...more
Mohawk Machinery Inc has 5 more
listings in CNC Lathes and Turning Centers.
CNC Power Squaring Shears (Gauge)
1 Result
10 gauge x 10' Wysong #1010 CNC, Wysong PC100 Control, 36" back gauge, adjustable rake, no pit
Category: CNC Power Squaring Shears (Gauge)
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Wysong
Model: 1010
10' x 10 GA WYSONG CNC MECHANICAL POWER SQUARING SHEAR, Serial No P32-2041, Model 1010, Wysong "PC100" Programmable CNC Control, 36" CNC Controlled Front Operated Power Back Gauge, 72" CNC Controlled Power Precision Squaring Arm, 72" CNC Controlled Power Precision Front Gauging, (16) Spring-Activated Automatic ...more
CNC Power Squaring Shears (Inch)
1 Result
1/4" x 12' Wysong #1225, CNC mechanical power squaring shear system, PC Control PC800 Shearwizard CNC shear Control, 36" front operated power back gauge, 2025
Category: CNC Power Squaring Shears (Inch)
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Wysong
Model: 1225
Year: 2025
12' X 1/4" WYSONG 1225 MECHANICAL POWER SQUARING SHEAR SYSTEM - PC800 SHEARWIZARD Control - Power Front Gauge- Power Back Gauge - Power Squaring Arm - Sheet Support, 12' x 1/4 WYSONG CNC MECHANICAL POWER SQUARING SHEAR, Retrofit 2025, Serial No P28-472, Model 1225, PC Control PC800 SHEARWIZARD CNC Shear ...more
55 Ton, Clearing, Niagara #HB-55-4-6, CNC hydraulic press brake, 6' overall, 54" between housing, 10 gauge
Category: CNC Press Brakes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Clearing
Model: HB-55-4-6
6 x10 GA CLEARING NIAGARA HB-55-4-6 55-TON CNC HYDRAULIC PRESS BRAKE - Zakron Comp-U-Bend "MCI 61000" CNC Control w/2-Axis Back Gauge - 72 Overall - 54 Between Housings - 6 Stroke - 6 Throat, 6 x 10 GA CLEARING NIAGARA 55-TON CNC HYDRAULIC PRESS BRAKE, Serial No P54147, Model HB-55-4-6, Zakron Comp-U-Bend MCI 61000 ...more
Mohawk Machinery Inc has 10 more
listings in CNC Press Brakes.
Coil Handling - Miscellaneous
1 Result
24" Hydraulic arm-type coil bender, Tru-Cut Inc., 15 HP Bosch hydraulic unit w/gauging, some dies
Category: Coil Handling - Miscellaneous
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Tru-Cut
Model: 24 HYD ARM-TYPE COIL BENDER
24" TRU-CUT INC HYDRAULIC ARM-TYPE COIL BENDER, Serial No M4740, 15 HP Bosch Hydraulic Unit w/Gauging, Vickers Hydraulic Valves w/Gauging, Control Stand w/Auto-Hand & Reset Capabilites, Anvil Extend & Retract - Bend Extend & Retract, Some Extra Dies, CATALOG :, Coil Height Capacity, Maximum 24", Floor ...more
Coil Reels and Straighteners (Combination)
1 Result
150 lb. Rapid-Air, combination R36NA coil reel & SB4PE motorized straigthener
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Rapid-Air
150LB X 4" RAPID-AIR COMBINATION "R36NA" COIL REEL & "SB4PE" MOTORIZED STRAIGHTENER - Variable Speed - 36" OD, 150 LB x 4" RAPID-AIR SINGLE-END COIL REEL & STRAIGHTENER, Reel Serial No 10146, Reel Model R36NA, Straightener Serial No 112551, Straightener Model SB4PE, Rapid-Air "R36NA" Single-End Reel ...more
11250 lbf. Instron #2404, bench type unispace tension & compression testing, 50 kn static load cell, rebuilt 2009
Category: Compression Testers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Instron
Model: 2404
Year: 2009
11250 LBF INSTRON "4204" BENCH TYPE UNISPACE TENSION, AND COMPRESSION TESTER, REBUILT 2009, REBUILD SERIAL NO 09-13283, MODEL 4204, 11250 LBF INSTRON "4204" BENCH TYPE UNISPACE TENSION, AND COMPRESSION TESTER, REBUILT 2009, REBUILD SERIAL NO 09-13283, MODEL 4204, UPDATED ELECTRONIC CONSOLE WITH, ADMET CONTROLS ...more
Conveyor and Pass Through Parts Washer
1 Result
Ransohoff #12" LeanVeyor, Stainbless steel thru feed electric multi-station parts washer, 2008
Category: Conveyor and Pass Through Parts Washer
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Ransohoff
Model: 12LEANVEYOR
Year: 2008
12" RANSOHOFF "12" LEAN-VEYOR" STAINLESS-STEEL THRU-FEED ELECTRIC MULTI-STATION PARTS WASHER - Wash Station - Blow Off - Chain Conveyor - Tube Axial Exhauster - Compressed Air Blow-Off - Oil Skimmer, 12" RANSOHOFF "12" LEAN-VEYOR" STAINLESS-STEEL THRU-FEED MULTI-STATION, ELECTRIC PARTS WASHER, New 2008, Serial No ...more
3" Modern #3K-LH, automatic pipe-tube-bar cut-off lathe, updated Allen Bradley Panel View 550 PLC controls
Category: Cut Off Machines
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Modern
Model: 3K-LH
3" MODERN #3K-LH AUTOMATIC PIPE-TUBE-BAR CUT-OFF-LATHE, Serial No 3K3225LH, Model 3K-LH, 3" MODERN #3K-LH AUTOMATIC PIPE-TUBE-BAR CUT-OFF-LATHE, Serial No 3K3225LH, Model 3K-LH, Updated Allen Bradley Panel View 550 PLC, Controls, 20' Modern Automatic Bar-Feed System, 11' Overhead Micrometer Stock-Stop ...more
Sweco #FMD-4LR vibratory deburring machine, 4 cu ft, reverse discharge automatic internal seperation, 2 HP, #29599
Category: Deburring Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Sweco
Model: FMD-4LR
4 CU. FT. SWECO VIBRATORY DEBURRER, Serial No 4FM-979-415-F, Model FMD-4LR, 4 CU. FT. SWECO VIBRATORY DEBURRER, Serial No 4FM-979-415-F, Model FMD-4LR, Reverse Discharge Automatic Internal Seperation, Batch Automatic & Continuous Finishing Capabilities, Cast Polyurethane Chamber Lining, CATALOG SPECIFICIATIONS: ...more
Mohawk Machinery Inc has 2 more
listings in Deburring Machines.
Desiccant Compressed Air Dryers
1 Result
Mikropor America #MHL-DWG-1000, desiccant air dryer, 100 psi, 2020
Category: Desiccant Compressed Air Dryers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Mikropor America
Model: MHL-DWG-1000
Year: 2020
100 PSI MIKROPOR AMERICA "MHL-DWG-1000" DESICCANT AIR DRYER - (2) Board Certified Storage Tanks - Activated Alumina Desiccant - New 2020, 100 PSIG MIKROPOR AMERICA DESICCANT AIR DRYER, New 2020, Serial No 2220MHL00007, Model MHL-DWG-10000, (2) Mikropor Board Certified Tanks (Board Numbers 1360 & 1361), Activated ...more
Die Cutting Press Machines
1 Result
25 Ton, Associated Pacific #THNC-2570, traveling head hydraulic die cutting clicker press w/manual & automatic operation'
Category: Die Cutting Press Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Associated Pacific
Model: THNC-2570
25 TON ASSOCIATED PACIFIC TRAVELING-HEAD, HYDRAULIC DIE-CUTTING/CLICKER PRESS, Serial No 02119, Model No THNC-2570, 25 TON ASSOCIATED PACIFIC TRAVELING-HEAD, HYDRAULIC DIE-CUTTING/CLICKER PRESS, Serial No 02119, Model No THNC-2570, Manual/Automatic Operation, Control Joystick, Vari-Speed Operation, CATALOG :, Cutting ...more
40" Loewer #Discmaster-4TD-1000, thru feed abrasive belt deburring & edge rounding disc grinder sander, 2012
Category: Disc Sanders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Loewer
Model: DISCMASTER-4TD-1000
Year: 2012
40" (1000 MM) LOEWER DISCMASTER 4TB-1000 THROUGH FEED ABRASIVE BELT DEBURRING & EDGE ROUNDING DISC GRINDER SANDER, - 2012 - (4) Motorized Discs, 40 (1000 MM) LOEWER DiscMaster THROUGH FEED ABRASIVE BELT, DEBURRING & EDGE ROUNDING DISC GRINDER SANDER, New 2012, Serial No 11477, Model 4TD-1000, Series ...more
.5" to 3" Oliver #600, wet type drill pointer grinder, coolant tank & pump, 1.5 HP, 9" dia x 2" width grinding wheel
Category: Drill Grinders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Oliver
Model: 600
3" OLIVER "600" WET-TYPE DRILL POINTER GRINDER - 0.5" to 3" Drill Diameter Range - Coolant System (Tank & Pump), 600 OLIVER WET-TYPE DRILL GRINDER, Serial No G6256, Model 600, Coolant System (Tank & Pump), CATALOG :, Drill Diameter Capacity, Range.5" to 3", Drill Diameter Capacity, 3-Flute Drills 2.75", Flute ...more
Dust Collectors
1 Result
700 cfm Donaldson Torit #DB-800, 30" x 31" downdraft dust collector bench, new, never used
Category: Dust Collectors
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Donaldson Torit
Model: DB-800
30 X 31 DONALDSON TORIT DB-800 HEAVY-DUTY DOWNDRAFT DUST COLLECTOR BENCH - Shaker Bar - 700 CFM - New Condition - Never Used, 31 X 30 DONALDSON TORIT HEAVY-DUTY DOWNDRAFT DUST COLLECTION BENCH, New Condition Never Used, Serial No 16560376-L1-2, Model DB-800, Heavy-Duty Fully Welded Work Surface, Shaker Bar, Dust ...more
14"/16.5" x 102" LeBlond, taper attachment, digital read out, 3-jaw 12" chuck, steady & follow rest
Category: Engine Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Leblond
Model: 14 HEAVY DUTY
14"/16.5" x 102" LEBLOND "HEAVY-DUTY" ENGINE LATHE, w/TAPER ATTACHMENT & DIGITAL READOUTS, Series "14 HEAVY-DUTY", 14"/16.5" x 102" LEBLOND "HEAVY-DUTY" ENGINE LATHE, w/TAPER ATTACHMENT & DIGITAL READOUTS, Series "14 HEAVY-DUTY", Newall DP7 Digital Readouts, Taper Attachment, 12" 3-Jaw Chuck, Steady Rest - ...more
Mohawk Machinery Inc has 14 more
listings in Engine Lathes.
Gap Frame Double Crank Press Machines
1 Result
121 Ton, Aida #NC2-110 (1) double-crank gap frame press, 4.33" stroke, air clutch & brake, #30603
Category: Gap Frame Double Crank Press Machines
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Aida
Model: NC2-110 (1)
121 TON AIDA DOUBLE-CRANK GAP FRAME PRESS - #30603, Serial No 00511-1422, Model NC2-110 (1), Air Clutch & Brake, Variable Speed Drive, Power Slide Adjustment, Hydraulic Overload Protection, CATALOG :, Tonnage Capacity, Tons 110 TON, Tonnage Capacity, Short Tons 121 TON, Stroke Length 4.33", Die Height Slide to ...more
Gap Frame Single Crank Press Machines
5 Results
18 Ton, Neff #DF15-5HS, gap frame floor standing hydraulic production press, 10" stroke, 24" DL, 2006
Category: Gap Frame Single Crank Press Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Neff
Model: DF15-5HS
Year: 2006
18 TON NEFF "DF15-5HS" GAP FRAME FLOOR-STANDING HYDRAULIC PRODUCTION PRESS - 10" Stroke - 24" Daylight - 24" x 21" Bolster - 10" Throat - 5 HP Motor, 18 TON NEFF OPEN-BACK GAP FRAME HYDRAULIC PRESS, New 2006, Serial No 12162, Model DF15-5HS, Dual Palm Button Anti-Tie Down Control, Removable Ready Technology Die ...more
Mohawk Machinery Inc has 4 more
listings in Gap Frame Single Crank Press Machines.
Gleason #13A, universal hypoid bevel cutter sharpener, 1.3"-21" dia., automatic stop, self contained hydraulic system
Category: Gear Cutter Sharpeners
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Gleason
Model: -13A
13A GLEASON Universal Hypoid Cutter Sharpening Machine, Serial #117302, Suitable for the full automatic sharpening of spiral bevel cutters from, 1.3 to 21 diameter, as employed on the GLEASON 5-cut methodology, spiral bevel gear generators, as well as cutters for GLEASON straight bevel, " Revacycle" machines, and ...more
Redin #72, 72" universal dual arm gear deburrer w/2 adjustable heads
Category: Gear Deburrers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Redin
Model: 72
72" REDIN UNIVERSAL DUAL ARM GEAR DEBURRER, Serial No 72-14, Model 72, Suitable for the automatic de-burring / brushing of external, and internal spur and helical gears, straight and spiral bevel, gears, worm-gears, sprockets, and similar work-pieces up to, 72" (1829mm) diameter and 16" (406.4mm) face-width, EQUIPMENT ...more
Gear Hobbing Machine For Bevel, Helical, Spur and Worm
1 Result
Barber-Colman #14-30, double thread index, automatic hobshift, hob arbor, up to 14" dia & 15" lgth, 1970
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Barber-Colman
Model: 14-30
Year: 1970
#14-30 BARBER COLMAN HORIZONTAL HEAVY-DUTY GEAR HOBBER, NEW 1970, SERIAL NO. 1299, MODEL 14-30, SUITABLE FOR THE CUTTING/HOBBING OF SPUR AND HELICAL GEARS, SPLINES/PINIONS AND SPROCKETS UP TO 14"(356MM) DIAMETER, AND 30"(762MM) LENGTH/FACE-WIDTH., EQUIPMENT / S:, STANDARD HOB HEAD W/ANTI-FRICTION BEARING SPINDLE ...more
Gun and Deep Hole Drilling Machines
1 Result
2" x 84" Tarus #TPTCGD508SB, 4-Axis heaavy duty CNC gun drill
Category: Gun and Deep Hole Drilling Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Tarus
Model: TPTCGD508SB
Year: 2013
2" x 84" TARUS "TPTCGD508SB" 4-AXIS HEAVY-DUTY CNC GUN DRILL, Installed New 2013, Serial No TPTCGD2886080423, Model TPTCGD508SB, TPI-2000 PC Based CNC Control (Control S/N TPTCGDCNC2886423), Auxiliary Spindle For Milling, Thread Milling, Tapping Counter Boring, & Spot Facing, 22.5" x 38" Tacnonagnets ...more
H Frame Hydraulic Press Machines
5 Results
75 Ton, Dake #5-075, Elec-Draulic H frame traveling column hydraulic straighting press, 10" stroke, 2 HP
Category: H Frame Hydraulic Press Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Dake
Model: 5-075
75 TON DAKE "5-075" ELEC-DRAULIC H-FRAME TRAVELING COLUMN HYDRAULIC STRAIGHTENING PRESS - 31" X 30' (360) Work-Table w/Supports, 75 TON DAKE ELEC-DRAULIC H-FRAME TRAVELING-COLUMN HYDRAULIC, STRAIGHTENING PRESS, Model 5-075, Power Column Traverse, 2 HP Elec-Draulic Moveable Workhead, Variable Ram Speed, (3) ...more
Mohawk Machinery Inc has 4 more
listings in H Frame Hydraulic Press Machines.
Horizontal Band Saws
10 Results
8" x 11.5" Marvel Spartan #PA10/2, horizontal band saw, automatic hydraulic driven stock feed table with multiple indexing'
Category: Horizontal Band Saws
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Spartan
Model: PA10/2
8" x 11.5" Marvel/Spartan PA10/2 Automatic Horizontal Band Saw - Programmable Touch Screen Control - Hydraulic Blade Tensioning - Hydraulic Vises - 10" Rounds, 8 X 11.5 MARVEL/SPARTAN AUTOMATIC HORIZONTAL BAND SAW, Serial No DPA100643, Model PA10/2, AUTOMATIC Hydraulic-Driven Stock-Feed Table, w/MULTIPLE Indexing ...more
Mohawk Machinery Inc has 9 more
listings in Horizontal Band Saws.
Horizontal CNC Machining Centers
1 Result
Haas #EC-3000, 3-Axis CNC horizontal machining center, 120" X, 40" Y, 32" Z, 6000 RPM, 30 side mount tool changer, 120" x 28" table, thru spindle coolant, 2005
Category: Horizontal CNC Machining Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Haas
Model: EC-3000
Year: 2005
EC-3000 HAAS CNC Horizontal Machining Center, 30-position automatic tool changer - 30 HP 2-speed gear drive, thru-spindle coolant, 120" x 28" table, max load 10000 lbs. X/Y/Z travel: 120"/40"/32". Spindle speeds up to 6000 RPM, EC-3000 HAAS 3-AXIS CNC HORIZONTAL MACHINING CENTER, New 2005, Serial No 51585, Model ...more
Sunnen #EC-3500E Eclipse, horizontal power stroking hydraulic hone w/automatic size Control
Category: Horizontal Hones
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Sunnen
Model: EC-3500E
EC-3500-E SUNNEN "ECLIPSE" HORIZONTAL HYDRAULIC HONE, Serial No 3S1-1080, Model EC-3500-E, EC-3500-E SUNNEN "ECLIPSE" HORIZONTAL HYDRAULIC HONE, Serial No 3S1-1080, Model EC-3500-E, Automatic Size Control, Power Stroking - Manual Stroking, Automatic Stonewear Compensation, Coolant System, CATALOG :, Diameter Capacity ...more
Mohawk Machinery Inc has 2 more
listings in Horizontal Hones.
Enerpac, 300 ton double acting hydraulic system w/pump, cylinder & controls, #30559
Category: Hydraulic Power Units
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Enerpac
Year: 2010
300 TON ENERPAC DOUBLE-ACTING HYDRAULIC SYSTEM w/PUMP - CYLINDER, AND CONTROLS - #30559, Pump Serial No A12907001C, Pump Model ZE6440SJ-H, Cylinder Model RR30024, 7.5 HP Enerpac Hydraulic Pump (Model ZE6440SJ-H, S/N A12907001C), w/3-Position 4-Way Tandem Center Control Valve, 300 Ton Enerpac Double Acting Hydraulic ...more
120 Ton, Komatsu #PHS110X310, wide bed hydraulic press brake, 10.2'OA, 105" between housing, 6.7" stroke
Category: Hydraulic Press Brakes
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Komatsu
Model: PHS110X310
10' KOMATSU 120 TON WIDE-BED HYDRAULIC, PRESS BRAKE, Serial No 10296, Model PHS 110X310, 10' KOMATSU 120 TON WIDE-BED HYDRAULIC, PRESS BRAKE, Serial No 10296, Model PHS 110X310, 18" x 122" T-Slotted Wide Bed Attachment, 18" x 122" Extra Wide Ram Attachment w/Bolt On, Angle Plates, Electric Depth-Stop ...more
30 Ton, Beckwood #0, 4-post hydraulic press, 6" stroke, 34" x 30" bed/ram area, 5 HP, 2000
Category: Hydraulic Presses
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Beckwood
Year: 2000
30 TON BECKWOOD 4-POST PRESS HYDRAULIC PRESS - 34" x 30" Bed & Ram - 6" Stroke - 25" Open Height - 5 HP Hydraulic Motor, 30 TON BECKWOOD 4-POST HYDRAULIC PRESS, New 2000, Seral No H26430-B, PLC Control, Pedestal Control Stand - Auto Cycle Reset, 5 HP Vickers Hydraulic System, Pressure Gauge - Oil Cooler, 30 GALLON ...more
Hydraulic Straightening Presses
1 Result
200 Ton, Dake #19-525, push buttons & controls, Bell housing & work support table (removeable), 40" stroke, 25 HP
Category: Hydraulic Straightening Presses
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Dake
Model: 19-525
200 TON DAKE "H"-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS, SERIAL NO 190373, MODEL 19-525, 200 TON DAKE "H"-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS, SERIAL NO 190373, MODEL 19-525, PUSHBUTTONS & CONTROLS CONSISTING OF: FAST DOWN, SLOW DOWN, FAST RAISE, FRAME FORWARD, SLOW RAISE, LOCK FRAME ...more
Initial and Double Pinch Plate Bending Rolls
6 Results
1.6' x 16 gauge Acrotech #1618, 2-roll, 1-pass bending machine, 3.5" top roll, 6" bottom roll, 15 FPM, 1 HP'
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Acrotech
Model: 1618
18" x 16 GA ACROTECH "1618" TWO ROLL ONE-PASS BENDING MACHINE - 1 HP Motor - 22 FPM, 18" x 16 GA ACROTECH "1618" TWO ROLL BENDING MACHINE, Serial No 0295-100-077, Model 1618, One Pass Design, CATALOG :, Working Length of Rolls 18" 457MM, Capacity Mild Steel 16 GA 1.5MM, Diameter of Top Roll 3.5" 88.9MM, Diameter of ...more
Mohawk Machinery Inc has 5 more
listings in Initial and Double Pinch Plate Bending Rolls.
Virtek #Laserqc-1200, laser inspection machine, 48" x 48" scan zone, 12" part thickness, 2008
Category: Inspection Equipment
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Virtek
Model: LASERQC-1200
Year: 2008
VIRTEK "LASERQC 1200" LASER INSPECTION SYSTEM, New 2008, Serial No 08066762, Model LaserQC 1200, VIRTEK "LASERQC 1200" LASER INSPECTION SYSTEM, New 2008, Serial No 08066762, Model LaserQC 1200, LPS-1DS Virtek Laser Projector (S/N 08066762), Optic Head w/Self Contained Laser Power Source, PC Cabinet - Windows XP ...more
Cincinnati Milacron #174, 4500 RPM Heald Red Head grinding wheel spindle, 42" face plate (3 available)
Category: Internal Grinders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Cincinnati
Model: 174
#174 CINCINNATI-MILACRON/HEALD ADJUSTABLE GAP-TYPE "PLAIN" INTERNAL GRINDER, SERIAL NO 50350, MODEL 174, SERIES "PLAIN", #174 CINCINNATI-MILACRON/HEALD ADJUSTABLE GAP-TYPE "PLAIN" INTERNAL GRINDER, SERIAL NO 50350, MODEL 174, SERIES "PLAIN", 4500 RPM HEALD "RED HEAD" GRINDING WHEEL SPINDLE, HYDRAULICALLY OPERATED ...more
Mohawk Machinery Inc has 6 more
listings in Internal Grinders.
5" x 5" x 1/2" Hill-Acme #5, metalworker hydruaic ironworker with punch, shear, coper, notcher, 75 ton, 10 HP
Category: Ironworkers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Hill-Acme
Model: 5
75 TON HILL-ACME "MODEL 5" HYDRAULIC METALWORKER IRONWORKER - Punch - Shear - Coper/Notcher - 20 Throat - 10 HP - Some Tooling, 75 TON HILL-ACME "MODEL 5" HYDRAULIC METALWORKER IRONWORKER, Serial No 510255-S, Model 5, Series Metalworker, Punch - Shear - Coper/Notcher, Foot Tredle Control, Some Tooling, CATALOG : ...more
Mohawk Machinery Inc has 1 more
listing in Ironworkers.
Lab Freezers
1 Result
Cincinnati Sub Zero #T-122-LN2" liquid nitrogen heavy duty industrial freezer, 122 cu.ft., hydraulic lid
Category: Lab Freezers
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Cincinnati
Model: T-122-LN2
T-122-LN2 CINCINNATI SUBZERO LIQUID NITROGEN, HEAVY-DUTY INDUSTRIAL FREEZER, Serial No 90-13742, Model T-122-LN2, T-122-LN2 CINCINNATI SUBZERO LIQUID NITROGEN, HEAVY-DUTY INDUSTRIAL FREEZER, Serial No 90-13742, Model T-122-LN2, Hydraulic Raise & Lowering of Lid, Gauging, Capacity, Cubic Feed 122 CU FT, Electrical ...more
Lappers Lapping Machines
2 Results
24" Speedlap #24BTW", timer, water cooled, (4) 9" retaining rings, extra lapping plates & tooling
Category: Lappers Lapping Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Speedlap
Model: 24BTW
24" SPEEDLAP LAPPER, Serial No. SNF-24 BTW-174, Model 24, 24" SPEEDLAP LAPPER, Serial No. SNF-24 BTW-174, Model 24, Timer, Water Cooled, (4) 9" Retaining Rings, Extra Lapping Plates And Tooling, CATALOG :, Plate Diameter 24", Segment Thickness 1", Plate Speed, RPM 87 RPM, Motor, Horsepower/RPM 3 HP/1740 RPM ...more
Mohawk Machinery Inc has 1 more
listing in Lappers Lapping Machines.
96" x 96" x 9" Floor plate layout table, drilled & tapped, 8" center hole
Category: Layout Tables
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
96" (8') X 96" (8') x 9" H FLOOR PLATE LAYOUT TABLE - Drilled & Tapped - 8" Center Hole, 96" x 96" x 9" FLOOR PLATE LAYOUT TABLE, Drilled & Tapped Mounting Holes, I-Beam Support Base, CATALOG :, Overall Dimensions, L X W 96" x 96", Overall Height 9", Center Hole Diameter 8", F.O.B. OUR WAREHOUSE.
Longitudinal Seam Welders
2 Results
5' Pandjiris #60E5.1-30, external/internal longitudinal seam welder, Pandjiris EZ-Link Series Microprocessor Control
Category: Longitudinal Seam Welders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Pandjiris
Model: 60E5.1-30
Year: 2016
60" PANDJIRIS EXTERNAL/INTERNAL LONGITUDINAL SEAM WELDER, New 2016, Serial No 2169E00, Model 60E5.1-30, Pandjiris EZ-Link Series Microprocessor Controller w/Speed Control -, Travel Start & Stop Controlling Both The Travel Carriage & Initiation, Of Weld Sequence, Internal Weld Seam Table w/Bar, Pandjiris Quick ...more
Mohawk Machinery Inc has 1 more
listing in Longitudinal Seam Welders.
Marking Machines (Including Laser Markers)
1 Result
Janome #JP-104, electroc-press servo press & Columbia Slide-A-Mark pneumatic marking press, 2012
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Janome
Model: JP-104
Year: 2012
10 kN JANOME JP-104 STAND-ALONE TABLE-TYPE ELECTRO PRESS HIGH PRECISION SERVO PRESS W/4 TON COLUMBIA MARKING TOOLS 451 SLIDE-A-MARK PNEUMATIC MARKING PRESS & TABLE, 10kN JANOME STAND ALONE TABLE TYPE, ELECTRO PRESS HIGH-PRECISION SERVO PRESS, & 4 TON COLUMBIA MARKING TOOLS SLIDE-A MARK, PNEUMATIC MARKING ...more
Miscellaneous Mixers and Blenders
1 Result
VA Technology #027-432j, Ceramix batch slurry mixer with 20 gallon tub, 4 HP, pivoting bracket'
Category: Miscellaneous Mixers and Blenders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Va Technology
Model: 027-432J
4 HP 20 GALLON VA TECHNOLOGY "765 206A M.30 150" CERAMIX BATCH SLURRY MIXER W/TUB -, 4 HP VA TECHNOLOGY CERRAMIX BATCH SLURRY MIXER, Mixer Head Model 765 206A M.30 150, Serial No 14572, 4 HP (3KW) VA TECHNOLOGY Mixing Head & Shaft, Model 765 206A M.30 150, Serial No 14572, VA TECHNOLOGY Hemispherical Base ...more
5/32" x 10" x 10" Americor #254, hydraulic corner notcher, foot treadle, front to back cutting, adjust stroke, scrap receptacle
Category: Notching Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Americor
Model: 254
10" X 10" X 5/32" AMERICOR HYDRAULIC NOTCHER, SERIAL NO 254800, MODEL 254, 10" X 10" X 5/32" AMERICOR HYDRAULIC NOTCHER, SERIAL NO 254800, MODEL 254, FOOT TREADLE - DUAL SUPPORT TABLES, DUAL HYDRAULIC CYLINDERS, FRONT TO BACK CUTTING, ADJUSTABLE STROKE - SCRAP RECEPTACLE, CATALOG :, Capacity Rated, Mild Steel 10" x ...more
Mohawk Machinery Inc has 2 more
listings in Notching Machines.
Oil Field and Hollow Spindle Lathes
2 Results
25" x 240"/8' Lodge & Shipley #RXE2516, dual side hollow spindle engine/boring lathe, 1962
Category: Oil Field and Hollow Spindle Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Lodge & Shipley
Model: RXE2516
Year: 1962
25" X 240/96" (20'/8') LODGE & SHIPLEY "RXE2516" DUAL-SIDE HOLLOW-SPINDLE, ENGINE/BORING LATHE, NEW 1962, SERIAL NO 45031, MODEL RXE2516, 25" X 240/96" (20'/8') LODGE & SHIPLEY "RXE2516" DUAL-SIDE HOLLOW-SPINDLE, ENGINE/BORING LATHE, NEW 1962, SERIAL NO 45031, MODEL RXE2516, LEFT HAND SIDE ...more
Mohawk Machinery Inc has 1 more
listing in Oil Field and Hollow Spindle Lathes.
14" Microvu #S14F, floor type optical comparator, with Micro-Vu Q16 computer with 3-Axis digital read out
Category: Optical Comparators
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Microvu
Model: S14F
14" MICRO-VU S14F OPTICAL FLOOR-TYPE OPTICAL COMPARATOR - Micro-Vu Q16 Computer w/3-Axis Digital Readout - 10X Lens, 14 MICRO-VU FLOOR STANDING OPTICAL COMPARATOR, Serial No 5250, Model S14F, EQUIPPED WIYH;, Micro-Vu Q16 Computer w/3-Axis Digital, Readout (Computer Serial No 5855), Thru-The Lens Surface Illumination ...more
Mohawk Machinery Inc has 2 more
listings in Optical Comparators.
Midaco #80SD, 80" x 29" CNC automatic pallet changer table shuttle w/aluminum pallets
Category: Pallet Changers
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Midaco
Model: 80SD
80" x 29" MIDACO CNC AUTOMATIC PALLET CHANGER, TABLE SHUTTLE W/ALUMINUM PALLETS, Model 80SD, 80" x 29" MIDACO CNC AUTOMATIC PALLET CHANGER, TABLE SHUTTLE W/ALUMINUM PALLETS, Model 80SD, Midaco PLC Controlller, (1) Shuttle, (2) 80" x 29" x 2.5" End Load Aluminum Pallets, Servo-Drive System, CATALOG :, Pallet ...more
Paper and Corrugated Materials Balers
1 Result
72" x 36" x 40" Maren #72-OE/100, open-end continuous automatic shredder & baler, w/electric tier, 30 HP, cart dumper
Category: Paper and Corrugated Materials Balers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Maren
Model: 72-OE/100
72 X 36 40 MAREN ENGINEERING 72-OE/100 OPEN-END CONTINUOUS AUTOMATIC SHREDDER & BALER w/SUMITOMO SHREDDER - ELECTRIC TIER, Serial No 995065, Model 72-OE/100, 72 X 36 40 MAREN ENGINEERING 72-OE/100 OPEN-END CONTINUOUS AUTOMATIC SHREDDER & BALER w/SUMITOMO SHREDDER - ELECTRIC TIER, Serial No 995065, Model ...more
Plain Cylindrical Grinders
2 Results
10" x 96" Norton #C, hydraulic plain cylindrical grinder, semi-autmatic pick type infeed attachment
Category: Plain Cylindrical Grinders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Norton
Model: C
10" X 96" NORTON "C" PLAIN HYDRAULIC CYLINDRICAL GRINDER - 30" Diameter Wheel - 15 HP Spindle Motor -Pick Feed, 10" x 96" NORTON PLAIN HYDRAULIC CYLINDRICAL GRINDER, Serial No C13658, Model C, Hydraulic Longitudinal Table Feed, Semi-Automatic Pick Type In-Feed Attachment, Workhead W/Reliance Vari-Speed Drive ...more
Mohawk Machinery Inc has 1 more
listing in Plain Cylindrical Grinders.
Planetary Mixers and Blenders
1 Result
4 gallon Ross #LDM-4, double planetary mixer with air/oil hydraulic lift, 5 HP, extra mixing tub'
Category: Planetary Mixers and Blenders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Ross
Model: LDM-4
4 GALLON ROSS LDM DOUBLE-PLANETARY MIXER -Air/Oil Hydraulic Lift - 5 HP Motor - Stainless-Steel Gearbox - Extra Tub, 4 GALLON ROSS DOUBLE-PLANETARY MIXER, Serial No 40143, Model LDM, Air/Oil Hydraulic Lift to Agitators, Sterling Variable-Speed Stainless Steel Gearbox (500 to 2500 RPM), 5 HP Marathon Drive Motor, 304 ...more
Plate and Frame Filter Presses
2 Results
31.5" Simex G.m.b.h. #SPK80-35/40, hydraulic filter press, (42) 800mm x 800mm plates, 2017
Category: Plate and Frame Filter Presses
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Simex
Model: SPK80-35/40
Year: 2017
800MM (31.5) SPK 80 SIMEX GMBH 35/40 HYDRAULIC FILTER PRESS - 42 Plates - Hydraulics - 2017, 800MM (31.5) SPK80 SIMEX GMBH 35/40 HYDRAULIC FILTER PRESS, New 2017, Serial No 80978, Type SPK 80, Model 35/40, (42) 800MM x 800 MM Plates, Hydraulic System, Control Cabinet, CATALOG :, Plate Dimensions, L x W 800MM x 800MM ...more
Mohawk Machinery Inc has 1 more
listing in Plate and Frame Filter Presses.
Power Squaring Shears (Gauge)
4 Results
16 gauge x 4.4' National #NH5215, hydraulic power squaring shear, manual back gauge, 25 SPM, 3 HP
Category: Power Squaring Shears (Gauge)
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: National
Model: NH5215
52" x 16 GA NATIONAL NH5216HYDRAULIC POWER SQUARING SHEAR - Manual Back Gauge - (2) Front Supports - 3 HP, 52" X 16 GA. NATIONAL HYDRAULIC POWER SQUARING SHEAR, Serial No 822-204, Model SH5216, Manual Back Gauge, (2) Front Supports, Spring Actuated Hold Downs, CATALOG :, Capacity, Mild Steel 52" x 16 GA., Capacity ...more
Mohawk Machinery Inc has 3 more
listings in Power Squaring Shears (Gauge).
Power Squaring Shears (Inch)
9 Results
1/4" x 10' Accurshear #825010, hydra-mechanical power squaring shear, 36" front operated power back gauge, 20 HP
Category: Power Squaring Shears (Inch)
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Accurshear
Model: 825010
10' x 1/4" ACCURSHEAR HYDRA-MECHANICAL, POWER SQUARING SHEAR - Model 825010, - power back gauge - squaring arm - front support, 10' x 1/4" ACCURSHEAR HYDRA-MECHANICAL, POWER SQUARING SHEAR, Serial No 114, Model 825010, 36" Front Operated Power Back Gauge, Squaring Arm - Front Supports, No Pit Required, Foot ...more
Mohawk Machinery Inc has 8 more
listings in Power Squaring Shears (Inch).
Precision and Second Operation Lathes
2 Results
12.5" x 20" Monarch #10EE, precision toolroom lathe, electric leadscrew reverse, collet chuck, some collets
Category: Precision and Second Operation Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Monarch
Model: 10EE
12.5" x 20" MONARCH "10EE" PRECISION TOOLROOM LATHE - Electric Leadscrew Reverse - Collet Chuck - Some Collets - Aloris Tool Post, 12.5" x 20" MONARCH "10EE" PRECISION TOOLROOM LATHE, Serial No 49601, Model 10EE, Electric Leadscrew Reverse, Collet Chuck - Some Collets, Aloris Tool Post - (5) Tool Holders, Flame ...more
Mohawk Machinery Inc has 1 more
listing in Precision and Second Operation Lathes.
Press Type Spot Welders
1 Result
350 KVA Federal / Wean United / T. J. Snow #PA-2-24/32, 3 phase projection spot welder
Category: Press Type Spot Welders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Federal
Model: PA-2-24/32
350-KVA FEDERAL/WEAN UNITED/TJ SNOW 3-PHASE PROJECTION SPOT WELDER, Serial No 35942-10-2, Model PA-2-24/32, 350-KVA FEDERAL/WEAN UNITED/TJ SNOW 3-PHASE PROJECTION SPOT WELDER, Serial No 35942-10-2, Model PA-2-24/32, Updated Unitrol Welding Control, 3-Phase Electrics, Water-Cooled, CATALOG :, KVA Rating 350 KVA, Throat ...more
Pyramid Plate Roll Machines
1 Result
7/16" x 12' WDM #100-11-12, 3-roll hydraulic pinch pyramid plate bending roll, 2-speed reducer
Category: Pyramid Plate Roll Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Wdm
Model: 100-11-12
12 X 7/16 WDM 100-11-12 3-ROLL HYDRAULIC PINCH PYRAMID PLATE BENDING ROLL - Hydraulic Drop End - Pendant Control - Roll Position Indicator - 0 to 22 FPM Roll Speed - 15 HP Motor, 12 x 7/16 WMD 3-ROLL HYDRAULIC PYRAMID PINCH PLATE BENDING ROLL, Serial No 60428-98, Model 100-11-12, Hydraulic Drop End, Hydraulic Driven ...more
5' -13" Carlton #3A, box table, tapping, power arm elevation, power clamping to arm, column & head, #5MT
Category: Radial Drills
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Carlton
Model: 3A
5'13" CARLTON RADIAL DRILL, Serial No 3A3878, Model 3A, 5'13" CARLTON RADIAL DRILL, Serial No 3A3878, Model 3A, 62" x 36" x 20" Plain T-Slotted Box Table, Tapping Capabilities, Plain-Type Base, Power Arm Elevation, Power Clamping to Arm, Column, & Head, Coolant System (Built-In), CATALOG :, Arm Length. ...more
Mohawk Machinery Inc has 2 more
listings in Radial Drills.
Reciprocating Surface Grinders - Horizontal Spindle
12 Results
8" x 18" Chevalier #Accugrind-818, hand feed horizontal spindle surface grinder, 2-Axis AcuRite digital read out, Walker electromagnetic chuck
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Chevalier
Model: ACCUGRIND-818
8" X 18" CHEVALIER "ACCUGRIND 818" HAND-FEED, HORIZONTAL-SPINDLE SURFACE GRINDER - Walker electro-magnetic chuck - Acu-Rite digital readouts - 9" x 20" Grinding Capacity, 8" X 18" CHEVALIER "ACCUGRIND 818" HAND-FEED, HORIZONTAL-SPINDLE SURFACE GRINDER, Serial No A6882003, Model Accugrind 818, Acu-Rite 2-Axis Digital ...more
Mohawk Machinery Inc has 11 more
listings in Reciprocating Surface Grinders - Horizontal Spindle.
10 Stand, Tishken #10-4-1-1, rollformer with 5 ton press, 5 ton cut-off, 1" dia spindle, R to L
Category: Rollformers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Tishken
Model: 10-4-1-1
10-STAND TISHKEN 10-4-1-1 ROLL FORMER w/5 Ton Press - 5 Ton Cut-Off, 1 Diameter Spindles - 3.5 Roll Space, 10-STAND TISHKEN ROLL FORMER, SERIAL NO. 540-640, MODEL 10-4-1-1, RIGHT TO LEFT FEED, 5 TON PUNCH PRESS (S/N 7920), 5 TON CUT-OFF, NOTE: MACHINE IS MISSING 2 SPINDLES AND 2 OUTBOARDS., PRICE: F.O.B. OHIO ...more
Jensen #7495, rotary drum, Stainless steel, thru feed parts washer, 3 tanks, dryer, electric heat, 1981
Category: Rotary Drum Parts Washer
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Jensen
Model: 7495
Year: 1981
15" JENSEN ROTARY DRUM "7495" STAINLESS-STEEL THRU-FEED PARTS WASHER - (3) Tanks - Dryer, 15 JENSEN 7495 ROTARY DRUM THRU-FEED PARTS WASHER, Serial No 7814, Model 7495, Design Rotary Drum, Stainless Steel Construction, (3) Tanks, Dryer, Electric Heat, CATALOG :, Drum Diameter 15, Wash Tank, Length 36", Rinse Tank 1 ...more
Rotary Screw Air Compressors (Positive Displacement)
1 Result
100 psi, Leroi #W30SST, horizontal rotary screw air compressor w/storage tank, 30 HP, 230-460 V.
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Leroi
Model: W30SST
30 HP LEROI W30SST HORIZONTAL ROTARY SCREW AIR COMPRESSOR - Base Mount Design - Oil Flooded - Air-Cooled - V-Belt Drive - Storage Tank, 30 HP LEROI HORIZONTAL ROTARY SCREW AIR COMPRESSOR, Serial No 4240x361, Model W30SST, Base Mount Design, Oil Flooded - Air-Cooled, V-Belt Drive, Storage Tank, CATALOG SPECICATIONS: ...more
Rotary Table Surface Grinders - Horizontal Spindle
3 Results
Arter #B-24, horizontal spindle rotary surface grinder, 25" electromagnetic chuck with rectifier & neutrol
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Arter
Model: B-24
25" ARTER B-24 HORIZONTAL-SPINDLE ROTARY SURFACE GRINDER - 25" Electro-Magnetic Chuck - 8" Height Under Wheel - 10 HP Spindle Drive Motor - 7.5 HP Hydraulic Unit, 25" ARTER HORIZONTAL-SPINDLE ROTARY SURFACE GRINDER, Serial No 2921, Model B24, Horizontal-Spindle Machine Design, 25" Diameter ...more
Mohawk Machinery Inc has 2 more
listings in Rotary Table Surface Grinders - Horizontal Spindle.
Rotary Table Surface Grinders - Vertical Spindle
14 Results
Blanchard #11-16, vertical spindle rotary surface grinder w/cylindrical grinding wheel, 16" chuck, 15 HP, coolant system
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Blanchard
Model: 11-16
16" BLANCHARD "11-16" VERTICAL-SPINDLE ROTARY SURFACE GRINDER - Cylindrical Grinding Wheel - 16" Electro-Magnetic Chuck w/Neutrol - 8" Height Under Wheel - 15 HP Spindle Motor, 16" BLANCHARD VERTICAL-SPINDLE ROTARY SURFACE GRINDER, Serial No 53567, Model 11-16, Vertical-Spindle Machine Design, 16" Diameter Magnetic ...more
Mohawk Machinery Inc has 13 more
listings in Rotary Table Surface Grinders - Vertical Spindle.
60" x 60" Giddings & Lewis #60-NC, T-slotted contouring power rotary table, #30453
Category: Rotary Tables
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Giddings & Lewis
Model: 60 NC
60" x 60" GIDDINGS & LEWIS T-SLOTTED CONTOURING, POWER ROTARY TABLE, Serial No 040-1111-68, Model 60 NC, Contouring & Indexing Capabilities, Updated Yasakawa SGMG-44A2AB Servo-Drive Motor, Power Table Rotation (Clockwise Or Counterclockwise), Air/Hydraulic Braking, CATALOG :, Table Working Surface, W x L 60" x ...more
Mohawk Machinery Inc has 2 more
listings in Rotary Tables.
No. 4A Warner & Swasey, M3550, square head, saddle type turret lathe, 29.5" swg o/bed ways, 9.3" spdl hole
Category: Saddle Turret Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Warner & Swasey
Model: 4A
Year: 1980
4A WARNER & SWASEY EXTRA HEAVY-DUTY, "SQUARE-HEAD" SADDLE-TYPE TURRET LATHE, W/CROSS-SLIDING TURRET & TAPER ATTACHMENT, New 1980, Serial 2843501, Lot 583, Model 4A, Series M3550, 9.3" Hole Thru Spindle - "Square-Head" Design, Taper Attachment on Turret, 24" 3-Jaw Chuck, (6) Flanged Tool Holders - 4-Way Tool ...more
Sheet Lifters
2 Results
880 lb. Anver #M100M-L-76500810, in-line mechanical vacuum sheet lifter, 2020
Category: Sheet Lifters
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Anver
Model: M100M-L-76500810
Year: 2020
880 LB ANVER M100M-L-76500810 IN-LINE MECHANICAL VACUUM SHEET LIFTER - M100M Mechanical Self-Powered Generator, 880 LB ANVER IN-LINE MECHANICAL VACUUM SHEET LIFTER, New 2020, Serial No 50200006398 SC20000C6398, Model M100M-L-76500810 (L88M4-132), Anver M100M Mechanical Self Powered Generator, Anver L88M4-132 In-Line ...more
Mohawk Machinery Inc has 1 more
listing in Sheet Lifters.
Sheet Metal Box and Pan Brakes
1 Result
14 gauge x 4' Chicago, Dreis & Krump #W31, manual box & pan press brake, 10 adjustable fingers
Category: Sheet Metal Box and Pan Brakes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Chicago
Model: W31
4 x 14 GA CHICAGO DREIS & KRUMP W31 MANUAL BOX & PAN PRESS BRAKE - (10) Fingers, 4' x 14 GA CHICAGO DREIS & KRUMP BOX & PAN BRAKE, Serial No 73223, Model W31, (10) Fingers (Adjustable), CATALOG :, Overall Length of Bed and Ram 4', Bending Capacity 4' x 14 GA, Finger Extension 6", Pass line ...more
Simplex Milling Machines - Horizontal
5 Results
Cincinnati Milacron #105-122 Powermatic 100 RF, 12" x54" table, 5 HP, some change gears
Category: Simplex Milling Machines - Horizontal
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Cincinnati Milacron
Model: 105-122
107-122 CINCINNATI-MILACRON "POWERMATIC 100 RF", HORIZONTAL-SPINDLE PRODUCTION MILL, Serial No 11B11P1AHE-18, Series Powermatic 100 RF, Model 107-122, 107-122 CINCINNATI-MILACRON "POWERMATIC 100 RF", HORIZONTAL-SPINDLE PRODUCTION MILL, Serial No 11B11P1AHE-18, Series Powermatic 100 RF, Model 107-122, Rise and Fall ...more
Mohawk Machinery Inc has 4 more
listings in Simplex Milling Machines - Horizontal.
Single Crank OBI Flywheel Press Machines
7 Results
25 Ton, Neff #DF25-15M, open back gap frame hydraulic press, 6" stroke, 15" DL, 10" throat
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Neff
Model: DF25-15M
25 TON NEFF DF25-15M OPEN-BACK GAP FRAME HYDRAULIC PRESS - High Frame - 15 Daylight - 6 Stroke - 10 Throat - 15 HP Motor, 25TON NEFF OPEN-BACK GAP FRAME HYDRAULIC PRESS, Serial No P9570, Model DF25-15M, ;, High Frame, #AC-1-25 Air to Oil Cooler w/Circulating Pump, DN-35 Automatic Cycle - PS-25 Positive Stop, CATALOG ...more
Mohawk Machinery Inc has 6 more
listings in Single Crank OBI Flywheel Press Machines.
Single Cranked Back Gear OBI Press Machines
3 Results
45 Ton, Bliss #C45, variable speed OBI press, air clutch & brake, 3" stroke, 12-1/4" Shut Height, 7.5 HP
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Bliss
Model: C45
Year: 1985
45 TON BLISS VARIABLE-SPEED O.B.I. PRESS, New 1985, Serial No. H70243, Order No. HP53581, Model C45, 45 TON BLISS VARIABLE-SPEED O.B.I. PRESS, New 1985, Serial No. H70243, Order No. HP53581, Model C45, Air Clutch & Brake, 7-1/2 HP Reeves Vari-Speed Drive, 2-1/3" T-Slotted Bolster Plate, Flywheel Type Design ...more
Mohawk Machinery Inc has 2 more
listings in Single Cranked Back Gear OBI Press Machines.
Single End Punch and Shear Machines
1 Result
77 Ton, Mubea #KLH-700/760, punch, tooling & extra components, 11 HP
Category: Single End Punch and Shear Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Mubea
Model: KLH-700/760
77 TON MUBEA HYDRAULIC PUNCH, Serial No KLH700/760/35, Model KLH 700/760, EQUIPPPED WITH:, Tooling & Extra Components, Stroke control - Infinitely variable 0" to 2-3/8", 77 TON MUBEA HYDRAULIC PUNCH, Serial No KLH700/760/35, Model KLH 700/760, EQUIPPPED WITH:, Tooling & Extra Components, Stroke control - ...more
Walker Scientific LDJ electronics capacitor discharge magnetizer (CDM) #6602
Category: Single Phase Capacitors
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Walker Scientific
6602-1 WALKER SCIENTIFIC LDJ ELECTRONICS CAPACITOR DISCHARGE MAGNETIZER (CDM) - 25 KVA REX MANUFACTURING TRANSFORMER - 2.5 to 60 kj Discharge Energy - 0 to 600 Volts Discharge Energy, 6602-1 WALKER SCIENTIFIC LDJ ELECTRONICS CAPACITOR DISCHARGE MAGNETIZER CDM, Serial No 030351887804, Model 6602-1, Upright Console ...more
Sliding & Gap Bed Lathes
5 Results
15" x 56" South Bend #Nordic-15", 3-jaw 8" chuck, taper attach, 40-2000 RPM, steady rest
Category: Sliding & Gap Bed Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: South Bend
Model: NORDIC-15
15" X 56" SOUTH-BEND "NORDIC 15" GEARED HEAD, ENGINE LATHE, Serial No. DN15770731N67, Model CL150E, Series "Nordic 15", 15" X 56" SOUTH-BEND "NORDIC 15" GEARED HEAD, ENGINE LATHE, Serial No. DN15770731N67, Model CL150E, Series "Nordic 15", Taper Attachment, 8" 3-Jaw Chuck w/Jaws - Steady Rest, Geared Head w/Hardened ...more
Mohawk Machinery Inc has 4 more
listings in Sliding & Gap Bed Lathes.
Larson #Flash-25, 2000 lb. motorized spring tester, 12" platform, 24" stroke, adjustable travel/test speed
Category: Spring Testers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Larson #flash-25
LARSON (LSI) "FLASH 25" MOTORIZED SPRING TESTER - 2000 LOAD CAPACITY - 12" PLATFORM - 24" STROKE - 6000 LB WHISPER DRIVE - COMPRESSION & EXTENSION TESTING OF FORCE & LENGTH, 2000 LB LARSON SYSTEMS INC (LSI) MOTORIZED SPRING TESTER, Model FLASH 25, LCD Touch Screen Control w/Flash Interface, Adjustable ...more
Straight Side Double Crank (Double Action) Press Machines
1 Result
300 Ton, Blow #SC2-300-144-48, heavy duty straight side 2-point vari-speed press, 6" stroke
Seller: Mohawk Machinery Inc
Location: Lithia, GA
Mfr: Blow
Model: SC2-300-144-48
Year: 1995
300 TON BLOW SC2-300-144-48 HEAVY-DUTY STRAIGHT-SIDE TWO POINT VARIABLE SPEED PRESS - 144 x 48 Bed & Ram - 6 Stroke - Floor Standing Design, 300 TON BLOW HEAVY-DUTY STRAIGHT-SIDE, TWO POINT VARIABLE SPEED PRESS, New 1995, Serial No SDG-300-348-95, Model SC2-300-144-48, OmniLink LCD Operator Control Terminal, Air ...more
Temperature Control Units (Oil & Water)
2 Results
9 KW Thermal Care #RA090804, Accutherm series RA injection molder temperature control
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Thermal Care
Model: RA090804
RA090804 THERMAL CARE ACCUTHERM SERIES RA INJECTION MOLDING TEMPERATURE CONTROLLER - 3/4 HP Process Pump - 9 KW -PLC Microprocessor w/Dual Digital Temp Disply - 460/3/50, RA090804 THERMAL CARE ACCUTHERM INJECTION MOLDER, TEMPERATURE CONTROLLER, Serial No 8930079710, Model RA090804, Series RA, PLC Microprocessor w/Dual ...more
Mohawk Machinery Inc has 1 more
listing in Temperature Control Units (Oil & Water).
Escofier #Flex-M20-E, CNC horizontal thrufeed/infeed thread roller, 20 ton, extra threading dies, 2012
Category: Thread Rollers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Escofier
Model: FLEX M20 E
Year: 2012
20 TON ESCOFIER "FLEX M20 E" CNC HORIZONTAL THRU-FEED/INFEED THREAD ROLLER - 2012 - 1.2: Maximum Work Piece Diameter - Siemens Control - Dies, 20 TON ESCOFIER "FLEX M20 E" CNC HORIZONTAL, THRU-FEED/INFEED THREAD ROLLER, New 2012, Serial No 20039, Affair No M115660, Model Flex M20 E, Siemens Simatic Panel CNC Control ...more
Mohawk Machinery Inc has 1 more
listing in Thread Rollers.
Tool and Cutter Grinders
5 Results
Amada #Togu-III-US, 6.30" automated tool grinder for punch press tooling, 3-jaw chuck, 2006
Category: Tool and Cutter Grinders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Amada
Model: TOGU-III-US
Year: 2006
6.30" AMADA "TOGU-III-US" AUTOMATED TOOL GRINDER FOR TURRET PUNCH PRESS TOOLING - Servo-Controlled Wet Rotary Grinding - 3-Jaw Chuck, 6.30" AMADA "TOGU-III-US" AUTOMATED TOOL GRINDER, Serial No 30230715, Model TOGU-III-US, Servo-Controlled Wet Rotary Grinding Design, Control Panel - 3-Jaw Chuck, Main Axis DC ...more
Mohawk Machinery Inc has 4 more
listings in Tool and Cutter Grinders.
2-1/2" Pines #1-1/4, horizontal extended-base hydraulic rotary tube/pipe bender
Category: Tube and Pipe Benders
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Pines
Model: 1-1/4
2-1/2" PINES "1-1/4" HORIZONTAL EXTENDED-BASE, HYDRAULIC ROTARY TUBE/PIPE BENDER, Serial No 11205-97053, Model 1-1/4, Series 112, 2-1/2" PINES "1-1/4" HORIZONTAL EXTENDED-BASE, HYDRAULIC ROTARY TUBE/PIPE BENDER, Serial No 11205-97053, Model 1-1/4, Series 112, Pines Digital Dial-A-Bend Control w/Remote Stand, Automatic ...more
6" Addison McKee #Formaster, 6' feed system, cabinet w/nice selection of tooling, 15 HP, #30469
Category: Tube End Formers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Addison
Model: FORMASTER
6" ADDISON MCKEE "FORMASTER" HYDRAULIC TUBE END FORMER, Serial No J016109, Model FM-150RF, Series Formaster, 6' Feed System, Pneumatic Tool Lift Device, Fan Powered Hydraulic Oil Cooler, Automatic Lubrication System, Rexroth Servo Valves, Cabinet w/Nice Selection Of Tooling, CATALOG :, Tube Diameter, Maximum 6" 150 ...more
Tumble Blast Cleaning and Shot Peening
1 Result
6 cu.ft. Metfin #Series-I-600" batch type shot blast w/dust collector & shaker table
Category: Tumble Blast Cleaning and Shot Peening
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Metfin
Model: SERIES-I-600
Year: 2016
6 CU FT METFIN (METAL FINISH & SUPPLY CO, INC), "SERIES I MODEL 600" BATCH-TYPE SHOT BLAST, w/DUST COLLECTOR & SHAKER TABLE, New 2016, Serial No 1157, Model 600, Series I, 6 CU FT METFIN (METAL FINISH & SUPPLY CO, INC), "SERIES I MODEL 600" BATCH-TYPE SHOT BLAST, w/DUST COLLECTOR & SHAKER TABLE, New ...more
ADF #900, pass through washer, 50" turntable diameter, wash heaters - rinse heater, oil skimmer, dual manual lift-up doors
Category: Turntable Parts Washers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Adf
Model: 900
Year: 2000
#900 ADF PASS THROUGH HIGH PRESSURE/LOW VOLUME #29078, PARTS WASHER, New 2000, Serial No. 7-4160, MFG Order No 3541, Model 900, Part # 9144-042-018SP, #900 ADF PASS THROUGH HIGH PRESSURE/LOW VOLUME #29078, PARTS WASHER, New 2000, Serial No. 7-4160, MFG Order No 3541, Model 900, Part # 9144-042-018SP, Allen-Bradley ...more
Mohawk Machinery Inc has 1 more
listing in Turntable Parts Washers.
Uncoilers and Centering Coil Reels
1 Result
2500 lb. Jaybird Automation #CRM251260, vari-speed motorized coil reel, 12" width, 60" outside dimensions
Category: Uncoilers and Centering Coil Reels
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Jaybird
Model: CRM251260
2500 LB JAYBIRD AUTOMATION CRM251260 VARIABLE-SPEED MOTORIZED COIL REEL - 12 Width Capacity - 60 Coil O.D. Maximum - 3 Arms w/Keepers, 2500 LB JAYBIRD VARIABLE-SPEED MOTORIZED COIL REEL, Serial No 3878, Model CRM251260, Saftronics Solid State Motor Control w/DFB Plus, Variable-Speed Regenerative DC Drive, 3-Arm Design ...more
Universal Cylindrical Grinding Machines
13 Results
8" x 20" Supertec #G20P-50NC, precision plunge type cylindrical grinder, Mitsubishi PLC Control, coolant system, 2007
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Supertec
Model: G20P-50NC
Year: 2007
8 X 20 SUPERTEC G20P-50NC PRECISION CYLINDRICAL GRINDER - Mitsubishi PLC Control w/Hand Held Pendant - Coolant System 2007, 8" X 20" SUPERTEC PRECISION PLUNGE TYPE CYLINDRICAL GRINDER, New 2007, Serial No. GB07005, Model G20P-50NC, Mitsubishi PLC Control w/Hand Held Pendant, Combination Live/Dead Spindle ...more
Mohawk Machinery Inc has 12 more
listings in Universal Cylindrical Grinding Machines.
Universal Milling Machine - Horizontal
1 Result
Toolmex/Jarocin #FWF-32, universal horizontal mill, pendant Control w/rapid traverse, arbor support, arbor, 2000
Category: Universal Milling Machine - Horizontal
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Toolmex
Model: FWF-32
Year: 2000
FWF 32 TOOLMEX/JAROCIN UNIVERSAL, HORIZONTAL MILL, New 2000, Serial No 2080, Model FWF 32, FWF 32 TOOLMEX/JAROCIN UNIVERSAL, HORIZONTAL MILL, New 2000, Serial No 2080, Model FWF 32, Pendant Control w/Rapid Traverse, Knee Motor - Arbor Support - Arbor, Universal Swivelling Table/Saddle (45-Degree), Automatic Lube ...more
41.8 ACFM, Dekker #RML051T2-40-CS, Duravane dual pump rotary vane vacuum pump system w/medical Control panel, 2020'
Category: Vacuum Pumps
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Dekker
Model: RML051T2-40-CS
Year: 2020
RML051T2-40-CS DEKKER "DURAVANE" DUAL-PUMP ROTARY VANE VACUUM PUMP SYSTEM w/MEDICAL CONTROL PANEL & VISION 120 PLC CONTROL - New 2020 -, RML051T2-40-CS DEKKER "DURAVANE" DUAL-PUMP ROTARY VANE VACUUM PUMP SYSTEM, New 2020, Serial No 34437, Model RML051T2-40-CS, Series DuraVane, MEDICAL CONTROL PANEL & VISION ...more
Vertical Band Saws
11 Results
18" x 18" Marvel #8, tilting head vertical band saw, 14' 8" x .75" x .032" blade, 1 HP, 58-200 FPM
Category: Vertical Band Saws
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Marvel
Model: 8
18 X 18 MARVEL 8" TILTING-HEAD VERTICAL BAND SAW - Manual Vise - Work Support - 45-Degree Tilt - 200 FPM, 18" x 18" MARVEL TILTING-HEAD VERTICAL BAND SAW, Serial No 810893, Model 8, Tilting-Head Design, Manual Vise, Work Support, CATALOG :, Work Capacity, Nominal 18" x 18", Work Capacity, Maximum 23" x 18.75", Work ...more
Mohawk Machinery Inc has 10 more
listings in Vertical Band Saws.
Vertical CNC Machining Centers
6 Results
Bridgeport, Hardinge #GX-300, 4" Axis CNC vertical, w/RNA-160L Tsudakoma NC rotary table
Category: Vertical CNC Machining Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Bridgeport
Model: GX-300
Year: 2013
GX-300 BRIDGEPORT/HARDINGE 4-AXIS CNC VERTICAL MACHINING CENTER, w/RNA-160L TSUDAKOMA NC ROTARY TABLE, New 2013, Serial No GXPB3H0015, Model GX-300, GX-300 BRIDGEPORT/HARDINGE 4-AXIS CNC VERTICAL MACHINING CENTER, w/RNA-160L TSUDAKOMA NC ROTARY TABLE, New 2013, Serial No GXPB3H0015, Model GX-300, Fanuc OiMD CNC ...more
Mohawk Machinery Inc has 5 more
listings in Vertical CNC Machining Centers.
Welding Machine Parts and Miscellaneous
1 Result
16' x 40' Automated track welding system, Gullco / Lincoln #GK-200-RHB0A, pendant Control w/vari-speed
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Lincoln
Model: 16' X 40' AUTOMATED TRACK WELDING SYSTEM
GULLCO GK-200-RHB-A AUTOMATED MOTORIZED TRACK WELDING CARRIAGE w/ 400 AMP LINCOLN "CV305" MIG Welder - LF-72 Lincoln Wire Feed, GULLCO "GK-200-RHB-A" AUTOMATED TRACK WELDING CARRIAGE w/400 AMP, LINCOLN "CV305" MIG WELDER & LF-72 LINCOLN WIRE FEED, Carriage Model No GK-200-RHB-A, Gullco GK-200-RHB-A Motorized ...more
Welding Manipulators
1 Result
1.2' x 10' Tak-Pme #14, motorized pipe fitting welding positioner manipulator, carriage type base
Category: Welding Manipulators
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Tak-Pme
14 X 120 TAK-PME MOTORIZED PIPE FITTING WELDING POSITIONER MANIPULATOR - Carriage Type Base - Dual Swiveling Mounting Plates - 2.5 to 14 Pipe Diameter Range, 24 to 120 Pipe Length Range, 14 x 120 TAK-PME MOTORIZED PIPE FITTING, WELDING POSITIONER MANIPULATOR, Carrriage Type Base, Dual Swiveling Mounting Plates, (1) ...more
Welding Positioners
4 Results
16000 lb. Ransome #2160P, variable speed welding positioner, updated motors & electrics
Category: Welding Positioners
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Ransome
Model: 2160P
16000 LB RANSOME "160" VARIABLE-SPEED WELDING POSITIONER - Updated Motors & Pendant Control, Variable Speed Rotation - Power Tilt - Fixed Base, 16000 LB RANSOME VARIABLE-SPEED WELDING POSITIONER, Serial No 6986. Model 160, Updated Motors, Pendant Control & Electrics, 53" x 53" T-Slotted Table, Variable Speed ...more
Mohawk Machinery Inc has 3 more
listings in Welding Positioners.
Nilson #751, 4-slide, 1/16" wire capacity, updated Cleco PC-100 controls, Data Instruments DiePro 1500 die protection system
Category: Wire Formers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Nilson
Model: 751
1/16" NILSON "751" FOURSLIDE, Serial No. 82900, Model 751, 1/16" NILSON "751" FOURSLIDE, Serial No. 82900, Model 751, Updated Cleco PC-100 Controls, Data Instruments DiePro 1500 Die Protection System, CATALOG :, Stock Width, Maximum 3/4", Stock Thickness, Maximum 1/32", Wire Diameter Capacity, Maximum 1/16", Feed ...more
