Buy or Sell Your Bullard Vtl

Located in Idaho, We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery, condition and ...more

BULLARD 24" VERTICAL TURRET LATHE Price: $6,950 Subcategory: Vertical Boring Mills / Vertical Turret Lathe Swing: 28" Manufacturer: Bullard Condition: Used, 24" TABLE.

RETROFITTED IN 1997 TO FANUC 18 TT CNC, 56" CHUCK, 60" SWING, 52" UNDER RAIL, SIDE HEAD, PRICE INCLUDES LOADING ON TRUCK.

54" Table with 4-jaws, 5-Position Turret Head, Side Head, Assorted Tooling, No pit required - Flush floor mounted machine., *All are subject to buyer review.

SWING: 122", 84" HEIGHT UNDER RAIL, 5 POSITION TURRET, 2.7 - 100 RPM (20) SPEEDS, 100HP DRIVE 480V, SIDE HEAD.

Bullard Vertical Turret Lathe, Model: CutMaster, 54 Inch Diameter Chuck, Max Swing 62 Inches, 30 HP Main Motor, 44 Inches Under The Rail, Turret Head, Side Head, 4 Jaw Chuck, $125,000.00 Loaded Out, Tom Hale Equipment Company, Inc., Best source of Vertical Boring Mills, Since 1981, Crossville, Tennessee Tom Hale - ...more

Fanuc 15TT CNC Control Faceplate Jaws 3” Diameter Ball Screws, s:, Power Rail Clamping 4 Position Turret index on Ram Head 75 HP DC Motor, Brief Scope of Work:, Rebuild Main table drive motor and install new DC Variable speed Drive., Check and repair or replace as needed all table, transmission and way ...more

1961 BULLARD 66" DYNATROL, Table Dia. 66", Swing. 72", Work Ht-U/R. 46", RPM. 200 RPM, 66" CHUCK DIAMETER, TURRET ON RIGHT- RAM ON LEFT- SIDE HEAD, SIDE HEAD NOT WORKING NOT COMPLETE, 72" MAX. SWING, 46" MAX. HEIGHT UNDER RAIL, TABLE SPEEDS 0 TO 200 RPM, PENDENT CONTROL, 4 - JAW INDEPENDENT CHUCK, HARDENED WAYS, SCAN- ...more

72" BULLARD AUTOMATIC TOOL BLOCK CHANGER, Manufacturer: Bullard, Model Number: Dyna Tape, Year Of Manufacture: 1982, Remanufactured 2004, Table Size: 72", Table Type: 4-Jaw Manual, Max Height Under Rail: 100", Max Swing: 78", Tool Changer: 16 Stations, Axis Travels: 45"X, 70"Z, Spindle Motor: 75 HP, Automatic Tool ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc O-T CNC Control, MPG Control, RS-232 Port ...more

WEBSTER & BENNETT TURRET TYPE < TOOL HOLDER > B2X LONG, FITS 48", 60" & 72" VTL, FITS 48" 60" & 72" VTL'S, Overview, Type: TOOLING & ACCESS._See also Specific Categories Manufacturer: WEBSTER & BENNETT Model: B2X Condition: Good Stock #: 10011 Status: For Sale Serial #: REQUIRES REHAB.

74" BULLARD CUTMASTER VERTICAL BORING MILL, New 1948, Motor Driven with 40 HP, 3-Phase, 60 Cycle, AC Motor & Controls, Ram Head, 5-Position Turret Head, 74" 4-Jaw Face Plate, Long Cylinder Ram Head with 41" Stroke, Diameter of Table 74", Max. Swing 82", Height Under Rail 62", Cross Rail Vertical Travel 48" ...more

Chuck Diameter: 46", Max. Swing with Side Head in Position: 49", Max. Swing with Side Head Below Table: 58", Chuck Speeds: 20 from 9 to 313 RPM, Feed Range: Variable 0.001 to 250 IPR, Max. Height Under Cross Rail: 40", Max. Height Under Turret Head: 36", Vertical Side Head Travel: 38.75", Horizontal Side Head Travel: ...more

Stock Number: B620031, Bullard 46 Dyna-Au-Tape, Serial No. 33776, Age: 1980, Condition: Very Good, Retro - Fitted Fanuc 16 T, Retro Fit Completed 2006, Table Size 46", Maximum Swing 58", Maximum Height Under Rail 60", Maximum Height Under Ram Face 68", Ram Stroke 60", Table Speeds Low 0 To 100 Rpm's, Table Speeds ...more

Stock Number: B600629, Bullard 42, Serial No. 20159, Age: 1942, Condition: Good, Table Size 42" 4-Jaw, Swing Side Head Above Table 45", Swing Side Head Below Table 46", Height Under Rail 36", Cross Rail Travel 25", Table Speed 8 To 83 Rpm's, Feeds.005 To.500, Main Motor 25 Hp., Turret Head Travel Left To Right ...more

Manufacturer:BULLARD, Model:54 SPIRAL DRIVE, Condition:Used - Good, Year:1945, Stock #:B600634, Status:For Sale, Serial #:24544, 54" Used Bullard Vertical Turret Lathe, Table Dia 50", Swing 56", Work Ht-U/R 39", Power 25 hp, RPM 60 RPM, Dimensions R-L 120" X F-B 9'6" X 120" High, Weight 24,000 Lbs., Table Size 50" ...more

36" BULLARD CUTMASTER VERTICAL TURRET LATHE, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $29,500.00, HMC Stock # 22175, Machine Serial No.: 29539, Machine Model No.: Cutmaster 75, New Date: 1954, Table Speeds: 8.2 to 300 RPM, Max. Swing Side Head Below Table: 45", Max. Swing Side ...more

Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All ...more

BULLARD TOOL HOLDER WITH 2.750" SHANK DIAMETER, MAKE: BULLARD, SHANK DIAMETER: 2.750", PRICE: $200 EACH OR $500 FOR ALL 3.

BULLARD TOOL HOLDER 2.750" SHANK EXTENDED SHANK WITH IT, MAKE: BULLARD, SHANK DIAMETER: 2.750", EXTENDED SHANK WITH IT, PRICE: $100.

*Re-machine the turret saddle, *Re-grind the turret slide, *Re-scrape and refit all surfaces, Rescrape and refit all gibs., *Re-flake all surfaces., *Re-fit with Phonelic material., We thank you for the opportunity to quote the following!, Webster & Bennet 72” vertical turret lathe rail and turret assembly. ...more

Youji VTL1000ATC VTL, CAPACITY:, TABLE DIAMETER 39.37″, MAXIMUM SWING 53.14″, MAXIMUM CUTTING DIAMETER 43.30″, MAXIMUM CUTTING HEIGHT 35.43″, RAIL TRAVEL 20″, RAM STROKE, Z-AXIS 31.49″, TABLE WEIGHT CAPACITY 8,800 LBS, TABLE SPEED, 2-RANGES 1-600 RPM, CUTTING FEED RATE 0.39-78.7 ...more

39" Youji VTL-1000ATC CNC Vertical Turning Center (2012), (Preliminary), Max Swing: 53", Max Cutting Dia:: 47", Max Cross Travel (X): 15.7", Plus 30.5", Max Clearance Under Ram: 49.8", Cross Rail Movement: 19.7", Max Table Load: 8,800 Lbs, Vertical Travel Of Ram: 31.5", Table Speed: 600rpm, Rapid Traverse Rate:: ...more

8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER BENNETT, 3 STEP, WILL FIT 36" VTL'S, MODEL. T39.40/1, QUANTITY. 4, JAW HEIGHT (G). 8", JAW WIDTH (X). 2 1/4", STEP 1 HEIGHT (F). 3", STEP 2 HEIGHT (F1). 2 1/2", STEP 3 HEIGHT (F2). 2 1/2", OVERALL LENGTH (D). 7 3/4", 3 STEP JAWS, EXCELLENT SERRATIONS / POSSIBLEY NEVER ...more

1999 Olympia CNC Vertical Turning Lathe with Fanuc 180I-T CNC control, 70″ Swing, 66″ table, Live tooled VTL, C axis, 32 ATC.

0P0720, AID, COLD WEATHER STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), AUTOLUBE ARRANGEMENT, BEACON, LED, CAT CERTIFIED USED, CHASSIS, STANDARD, Engine, EXHAUST, HEATED BODY, FILM GROUP, ANSI, GROUP, ETHER, HEATER, ENGINE COOLANT, 120V, LINER, DUMP BODY, LUBRICATION, AUTOMATIC, MIRROR, ELECTRIC ...more

AID, STARTING, STANDARD, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BODY, STANDARD, CERT EMISSIONS, OTHER REG, CHASSIS, STANDARD, ENG S/N RDP11331, EXHAUST, STANDARD, FENDER COVER, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LANE 3 ORDER, LUBRICATION, MANUAL, MIRROR, STANDARD, NO MACHINE SECURITY ...more

AID, COLD WEATHER STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BEACON, LED, BODY, STANDARD, CAB, STANDARD, CHASSIS, STANDARD, EXHAUST, STANDARD, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LANE 3 ORDER, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO REAR WIPER, NO ROOF LIGHTS ...more

AID,STANDARD STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C(-33F), BODY STANDARD, CATERPILLAR 730C2 ARTICULATED, CHASSIS,STANDARD, CMPD SOFTWARE, EIN#, FILM GROUP,ANSI, FL5S88, FUEL ADDITIVE,ANTI WAX, HEATER,ENGINE COOLANT,120V, LANE 1 ORDER, LUBRICATION,MANUAL, MIRROR STANDARD, NO MACHINE SECURITY SYSTEM ...more

AID, STARTING, STANDARD, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BEACON, LED, BODY, STANDARD, CAB, STANDARD, CHASSIS, STANDARD, EXHAUST, STANDARD, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LANE 3 ORDER, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO REAR WIPER, NO ROOF LIGHTS, NO ...more

BEACON LIGHT W/ HORN, CAT GRADE CONTROL W/LD ASSIST, COLD START ATTACHMENT, DOMESTIC TRUCK,TR/SCR COMBINED, ENGINE,C13/C9.3,US EPA TIER 4F, FILMS AR - U.S. (ANSI), LANE 3 ORDER, Online Owner's Manual, PRODUCT LINK, CELLULAR PLE742, PUSH PULL ARRANGEMENT, STANDARD CERTIFICATION AR, STORAGE PROTECTION, TIRES ...more

Allen-Bradley Frequency Drive. S/N: 1JAMOF000. AC input: 6.6/3.0 KVA CT, 7.0/8.5 KVA VT, 380/480 V, 10 Amps CT, 10.7 Amps VT, 3 phase, 50/60 Hz. AC output: 6.7 KVA CT, 7.2 KVA VT, 0/460 V, 8.4 Amps CT, 9.0 Amps VT, 3 phase, 0/400 Hz. DC input: 5.2 KVA CT, 5.5 KVA VT, 540/650 V, 8 Amps CT, 8.5 Amps VT. Overall ...more

Valenite holder. (1-T-6), (V40CT-B125-400), Valenite cutter. (VST-04-2-08-25-31), (Val-u-mil 9T5), universal screw. 5004, inserts included, Overview, Type:TOOLING & ACCESS._See also Specific CategoriesManufacturer:VALENITEModel:40 TaperCondition:ExcellentStock #:11603Status:For Sale.

AID, COLD WEATHER STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BEACON, LED, BODY, STANDARD, CAB, STANDARD, CHASSIS, STANDARD, EXHAUST, STANDARD, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LANE 3 ORDER, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO REAR WIPER, NO ROOF LIGHTS ...more

used- reftec shark recovery and recycling system. cleans dirty r134a back to ari 700 standard reclaimed gas in a single pass. removes oil, acids, moisture and hard particulates from even the dirtiest of gases. for every 1% of contamination the shark reclaim unit removes, 2% of efficiency has been restored. r134a rates ...more

AID, STARTING, STANDARD, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BEACON, LED, BODY, STANDARD, CERT EMISSIONS, OTHER REG, CHASSIS, STANDARD, EXHAUST, STANDARD, FENDER COVER, FILM GROUP, ANSI, GROUP, ETHER, LANE 3 ORDER, LUBRICATION, MANUAL, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO ...more

Blade Type - VPat, BLADE, LGP, VPAT, DOZER CTL, ARO/GRADE, LGP VPAT, FAN, STANDARD, JOYSTICK, ARO/GRADE, VPAT, OIL CHANGE SYSTEM, HIGH SPEED, REAR CAMERA, Remaining Factory Warranty Earthmoving Extended Warranty - PWT, HDY, TECH expires 6/22/27 or 5000 hours., RIPPER CONTROL PACKAGE.

AID, STARTING, STANDARD, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BEACON, LED, BODY, STANDARD, CAB, STANDARD, CHASSIS, STANDARD, EXHAUST, STANDARD, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LANE 3 ORDER, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO REAR WIPER, NO ROOF LIGHTS ...more

AID, STARTING, STANDARD, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BEACON, LED, BODY, STANDARD, CAB, STANDARD, CHASSIS, STANDARD, EXHAUST, STANDARD, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LANE 3 ORDER, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO REAR WIPER, NO ROOF LIGHTS ...more

For sale is one (1) used Flowserve Mag Drive Pump., Pump, Flowserve, Model: Mag Drive, Size: 2x1 x 10A MTL D4 / CF8M, MDP: 275 PSI @ 100, SN#: 0305-0142, EQIP # 017515, Motor, Siemens, HP: 40, Frame: 324TS, Volts: 230/460, Phase: 3, Enclosure: TEFC, RPM: 3530, SN: K98TD08151.