Buy or Sell Your 1500 Ton Presses

SERIAL.: 527, MODEL.: 918-527, TONNAGE.: 100, STROKE.: 42", OPEN-HEIGHT.: 60", CLOSED HEIGHT.: 18", PRESSING SPEED:, APPROACH.: 85 I.P.M, PRESSING.: 0 TO 17 I.P.M, BREAKAWAY.: 0 TO 38 I.P.M, RAPID RETURN.: 194 I.P.M, BED SIZE.: 84" X 48", BETWEEN POST.: 60" X 60", ROLLING BOLSTER. DOES NOT NEED HOOKED UP TO RUN ...more

SERIAL. Y8561-1596, AGE. 1995, CAPACITY. 150 TONS, STROKE. 6", SHUT HEIGHT. 10-14", DIE RAILS LENGTH. 49", FRONT POST DISTANCE. L-R 37", SIDE POST DISTANCE. F-B 27", TOP BASE TO FLOOR. 68, SITS ON A BASE.4", RAIL HIGHT.4.75", CHUTE OPENING. 10" X 23", BASE SECTION. 67" X 71", LUBRICATION. YES, AIR CLUTCH. YES, MOTOR. ...more

150 TON PRESSMASTER GANTRY STYLE HYDRAULIC STRAIGHTENING PRESSMODEL GSP-150T-6/8 RATED CAPACITY, TONNAGE. 150STROKE. 16"BORE. 11"RAM SPEED PRESS. 6 IPM ADVANCE. 24 IPM RETURN. 28 IPMTABLE SIZE (RIGHT TO LEFT). 72"TABLE SIZE (FRONT TO BACK). 96"DAYLIGHT. 16.5"RAM TRAVEL (LEFT TO RIGHT). ...more

Model, TL-SE4-2000, Tonnage, 2000 tons, Bed Size, 216'' x 108'', Bed Size: 216'' x 108'', Year: 1985 Tonnage: 2000T Model: TL-SE4-2000 Rating: ½” BDC DIE SPACE: 240” x 108” Bolster Size: 216'' x 108'' Stroke: 30” Shut Height: 60” Speed: 12 to 24 SPM Micro-inch through main motor 6 ...more

Make: Minster, Model: P2-150, Year: 1900, Machine Location: Upon Request, CAPACITY: 150 TONS, STROKE: 6″, MAX. SHUT HEIGHT TO BED: 23″, BED AREA: 54″ X 40″ (RL X FB), SPEED: 45-90 STROKES PER MINUTE, RAM ADJUSTMENT: 4, RAM AREA: 54″ X 23″ (RL X FB), BOLSTER PLATE: 54″ X ...more

Ransome Micarta 150 Ton Tank Turning Rolls, Model 150 PRM, Serial # 6625195/6725196, Asset # 14779, Weight Capacity for Set 750 Tons, Concentric Turning Capacity 150 Tons, Diameter Range 8” – 32”, Speed 1.3-63 IPM, Wheel Center to Center 23”, Wheel Diameter 22”, Wheel Rubber Width 12 ...more

1000 Tons X 20’ Hydraulic Press Brake with DA53T Delem Controller, DSP Front Laser Safety, LED Work Lamp, Rear Door, Fixed Front Supports, Fingers on Backgauge, Foot Pedal, Standard Punch & Die Set, Delivery, Installation and Training., Nominal Pressure: 1000 Tons, Workable Length: 240”, Distance ...more

USED MINSTER P2-150-54 PIECE MAKER 150 TON GEARED SSDC PRESS, CAPACITY: 150 TONS, STROKE: 6, MAX. SHUT HEIGHT TO BED: 23, BED AREA: 54 X 40 (RL X FB), SPEED: 45-90 STROKES PER MINUTE, RAM ADJUSTMENT: 4" MOTORIZED, RAM AREA: 54 X 23 (RL X FB), BOLSTER PLATE: 54 X 40 (RL X FB), DISTANCE BETWEEN UPRIGHTS: 56 approx ...more

ORDER 150, Capacity. 150 Tons, Overall Length Of Bed & Ram. 142”’, Distance Between Housings. 122”, Stroke. 4.72”, Open Height. 12.8”, Closed Height. 8.1”, Throat Clearance. 9.8”, Approach Speed. 165 Inch Per Minute, Form Speed. 18 Inch Per Minute, Return Speed. 150 Inch ...more

, ***3 MACHINES AVAILABLE***, New in 2014 1150 Ton Hyundai EDIS-1150DL Two Platen Injection molding machine, Shot size: 184.55 Oz, Screw size: 110 mm, Tie bar spacing: 54.72" x 46.85", Platen Size: 74.80" x 66.93", Max. Open Daylight: 96.46", Yudo Robot, DUAL COREPULLS, DUAL AIRBLOW, 6 VALVE GATES., Hours: 52,000 ...more

500 TON K.R. WILSON HYDRAULIC PRESS, MANUFACTURER - K.R. WILSON, TONNAGE - 500 TON, STROKE - 28", BED AREA - 31" X 30", FLOOR TO BED - 36", CYLINDER SIZE - 16", MOTOR - 25 HP GE, 230/460 VAC, 3 PH, 60 HZ, 1170 RPM, PUMP - RACINE MDL# 605000, DIMENSIONS 6'2"L X 3'11"W X 13'4"H, APPROXIMATE WEIGHT 21,400 lbs..

Make: Minister, Model: P2-100-48, Year: 1900, Machine Location: Upon Request, Capacity: 100 U.S. Tons (910 kN), Stroke: 3.00 in (76 mm), Slide Adjustment : 4.00 in (100 mm), Shut Height: SDAU, on Bed • 17.50 in. (445 mm), Slide Are : 48.00 x 18.50 in.(1219 mm x 470 mm), Bed Area : 48.00 x 31.00 in.(1219 mm x 787 ...more

1100mm x 1100mm x Variable Length Approx Bale Size, Approximately 47 Tons/Hour Factory Stated Capacity, 1600mm x 1100mm Hopper Size, 55 Ton Pre-press Flap Force, 100 Ton Press Force, 100HP Electric Main Motor / 3HP Wire Tie Motor, Fully Automatic Twistomat Knotter System; 5 Wires Vertically, New 1993 : Approximately ...more

Forge tons 1,300 tons, Stroke 10 ", SH 25 ", SPM 80, Bed LR 35 ", Bed FB 41 ", Ram Face L-to-R 31 ", Ram Face F-to-B 31 ", Distance Between the Columns 36 ", Stroke Adjustment.5 ", Floor Space L-to-R 129 ", Floor Space F-to-B 106 ", Press Height Above Floor Level 162 ", Net Weight 135,000 lbs, Main Motor Power 75 hp ...more

, Tonnage Capacity: 100 Ton, Stroke: 4", Shut Height: 16-1/2", Slide Adjustment: 4", Bed Size: 27" F-B x 42" L-R x 2-5/8" Thick, Maximum Air Pressure for Press: 100 PSI, Maximum Air Pressure for Clutch: 40 PSI, Strokes per Minute: 85 SPM, Motor, 220/440/3/60, Die Set, Coolant Tank w/Pump, Approximate Weight: 7' x ...more

Mauldin Machine Inc., Dealers In New and Used Industrial Machinery, PROPOSAL, We are pleased to offer, subject to prior sale and our “Standard Terms and Conditions of Sales”, for immediate acceptance, the following:, ONE PREOWNED 7 ½” NATIONAL HEAVY DUTY UPSET FORGING MACHINE, MODEL NO. 7 ...more

MACHINE, Bed Area: 68 L-R x 48 F-B, Ram Area: 68 L-R x 48 F-B, Stroke: 10", Adjustment: 10", Speed: 20-60 SPM, Height: 19ft6in, Weight: 142,000lb, Length (LR): 12ft8in, Depth (FB): 8ft4in, Tonnage: 500.

Capacity: 4000 TONS, Min die space: 48", Max die space: 168", Main ram stroke: 180", Ejector stroke: 48", Distance between columns: 92" F-B, Distance between columns: 160" R-L.

SERIAL. 5097 RH, MODEL. K500-21, YEAR NEW. 1972, CAPACITY. 500 TON, OVERALL LENGTH OF BED AND RAM. 21', BED WIDTH. 18", DISTANCE BETWEEN HOUSINGS. 16'5", STROKE OF RAM. 12", OPEN HEIGHTS. 22", CLOSED HEIGHT. 10", DEPTH OF THROAT. 36", RAM PRESS SPEED FAST. 55 IPM, RAM PRESS SPEED SLOW. 26 IPM, RAM SPEED ...more

, Efficiently handle heavy-duty tasks with the Dake 150 Ton H-Frame Shop Press, model 906650. Featuring air-over-hydraulic power, dual air pumps for speed, a 48" width between uprights, and more, it's designed for precision and productivity in fabrication., Spec Sheet:, Dake 6-650 150 Ton H Frame Shop Press, Air ...more

150 Ton Williams White Hydraulic Bulldozer, Capacity. 150 ton, Width of Ram.4 ft 9”, Height of Ram. 12”, Width of Resist Head. 4 ft 1”, Height of Resist Head. 7.5”, Stroke of Ram. 4 ft, Daylight Opening. 4 ft, Distance Floor to Bed. ...more

, 2004 2000 Ton Krauss Maffei 2000-12000 MX:, Shot size: 264 Oz, Screw diameter: 135 mm, Tie Bar Spacing: 72.83" x 63", Platen size: 104.5" x 94.4", Corepulls, Airblows., Machine is in good running conditions. Still under power., Imperial Metric Tonnage 2,000 T 1,814.372 t Shot Size 264 oz 7,484.3 g Year 2004 2004.

100 Ton X 10’ CNC Hydraulic Press Brake with ETS 200 Pedestal Mounted Controller for Dual Palm Button or Foot Pedal Operation, Full Length Die Rail and Flush Floor Mount Design., Capacity: 100 Tons X 10’, Distance Between Housings: 8’ 6”, Ram Stroke: 16”, Closed Height: 8”, Throat ...more

, New in 2008 2200 Ton Toshiba Hydraulic Injection molding machine:, Shot size: 384 Oz, Screw size: 140 mm, Tie bar spacing: 70.86" x 62.99", Platen Size: 96.45" x 88.58", Max. Open daylight: 137.7", Control: Injectvisor V21, Hours: 34,342, Corepull: Yes., Machine is under power and in good running conditions. Still ...more

Tonnage 150, Stroke 8 inches, Shut Height 22 inches, Adjustment 6 inches, Bed Size 50" LR x 30" FB, Ram Area 34" LR x 24" FB, SPM 35, Standard, RECONDITION IN PROCESS 2024, Verson Press Model 150-OBG, Mechanical Metal Stamping, 150 ton Capacity, 8" Stroke, 22" Shut Height, 6" Motorized Adjustment, 50" LR x 30" FB Bed ...more

CLEARING 500 TON MODEL: S4-500-3657-2134 SERIAL NUMBER: 83086-81 YEAR: RE-NEW2025 KINEMATICS: ECCENTRIC TYPE RATED CAPACITY AT 20 mm: 500 Tons NUMBER of connecting rod: 4 SLIDE STROKE: mm 250 SLIDE ADJUSTMENT: mm 406 CONTINUOUS SPEED (variable): spm 18 - 55 SHUT HEIGHT, from top of bolster, SDAU: mm 988 SLIDE ...more

SERIAL. S150-1059, MODEL. S150-14 D-18, CAPACITY. 150 TONS, AREA OF BED. 97" X 26", DISTANCE BETWEEN POSTS. 46", STROKE OF RAM. 10-3/4", RAM SPEED. 14 IPM, RAM SPEED HIGH. 111 IPM, WIDTH BETWEEN UP RIGHTS. 14", DISTANCE BETWEEN BED CHANNELS. 20", DISTANCE RAM TO BED. 0" MINIMUM, 38" MAXIMUM, BED ADJUSTMENT. 12" ...more

Pre Owned Clearing 100 Ton Straight Side Double Crank Press, Serial Number 55-18837, Capacity 100 TONS, Ram Area 48’ X 24”, Bed Area 48” X 24”, Stroke 1 1/2”, Adjustment 2 1/2”, Open Height 12.1/2”, Closed Height 14”, Windows 18” X 9”, Bed Height 37” ...more

150 TON PRESSMASTER H-FRAME HYD. PRESSMODEL HFP-150 MWH EXTRA WIDE w/MOVABLE WORKHEAD RATED CAPACITY, TONNAGE. 150STROKE. 16"BORE. 11"RAM SPEED PRESS.IPM. 6 ADVANCE.IPM. 29 RETURN.IPM.″3 DISTANCE BETWEEN POSTS (RIGHT TO LEFT). 60"DISTANCE BETWEEN POSTS (FRONT TO BACK). 15"RAM TRAVEL LEFT TO ...more

MAX. CAPACITY 500 TON, MAX. STROKE 39.37" | (1000 mm), MAX. DAYLIGHT TO BED 51" | (1300 mm), BED AREA 98.4" X 65" (RL X FB) | (2500mm x 1650mm), SPEED 825/52/708 IPM | 350/300/22/2/58 MM, RAM AREA 98.4" X 65" (RL X FB), BOLSTER SIZE 98.4" X 65" (RL X FB) X 12" THICK T-SLOTTED | 33" x 77", FLOOR TO BED 55", PRESS ...more

Dake 150 Ton Electric Powered Hydraulic Tire Press with Guarding, 33-672, Inventory # 9304, Model: 33-672, Made in USA, Capacity: 150 Tons, Ram Speed – Advance/Return: 17 IPM / Gravity, Width Between Uprights: 36″, Max. Daylight: 36″, Ram Travel: 18″ – Limit Switch Stops Ram at End of ...more

Capacity: 1000 Tons, Model Number: SE4-1000-144-90T, Year of Manufacture: 1990, Bed Area: 144” x 90”, Slide Area: 144” x 90”, Stroke: 24”, Adjustment: 24”, Shut Height: 70” over bed SDAU, Shut Height (Over Bolster): 50” over rolling bolster, Shut Height over rolling ...more

Tonnage 500, Stroke 11.81 inches, Shut Height 41.73 inches, Adjustment 9.84 inches, Bed Size 118" LR x 51.18" FB, Ram Area 118" LR x 47.24" FB, SPM 20-40 VSPM, Used 500-ton Komatsu Press For Sale, Komatsu Straight Side Press Model E2P-500-2 WS, Serial Number - 10016, 500-ton Metric Capacity, 550-ton US Capacity ...more

PRELIMINARY, GOITI GAP FRAME PRESS, MODEL CFR, S/N 84-429-51, 100 TON CAPACITY, 5.5" STROKE (140 mm), 11.2" SHUT HEIGHT, 3.54" ADJUSTMENT (90 mm), 38" LR X 24.5" FB BED AREA, 24" LR X 18" FB RAM AREA, 56 SPM, WINTRESS MODEL WPC-1000 CLUTCH & BRAKE CONTROLS, OMRON SAFETY LIGHT CURTAINS, OPERATOR PALM BUTTONS ...more

Make: Accurl, Model: Genius Pro, Year: 2026, Machine Location: Upon Request, Delem DA58T CNC Control, Y1/Y2, X/R Servo Backgauge, Upgraded ECO Energy Savings Drive Standby Inverter, CNC Crowning System, Complete Set of Upper AND Lower tooling (4-way die), Quick release Style Clamps, Laser Safe system in front, and ...more

Make: Edwards, Model: 100 Ton, Year: 2026, Machine Location: Minnesota, Tonnage: 100, Max Capacity: 1-1/16″ Dia. in 1″ A36, (65,000 PSI Tensile), Stroke: 1-15/16″, Throat Depth: 11″, Open Height: 8-3/4″, Shut Heigh: 6-13/16″, Work Station: 39-3/8″, Standard Motor: 10 HP 3~ 208 ...more

LVD TOOLCELL 135/30 CNC PRESS BRAKE WITH TOOLING WAREHOUSE AND AUTO TOOL CHANGER, TONNAGE: 150, WORKING LENGTH: 120", NEW: 2023, MAX. TONNAGE: 150, PRESSURE: 290 BAR, WORKING LENGTH: 120", DISTANCE BETWEEN UPRIGHTS:157", STROKE: 11.8" - 15.7", DISTANCE TABLE/RAM: 19.6" - 23.6", TABLE WIDTH: 4.7", MAX. LOAD TABLE: 78 ...more

SERIAL. MT7-1209MODEL. MTH 100-120YEAR NEW.CAPACITY. 100 TONSOVERALL LENGTH OF BED & RAM. 120"DISTANCE BETWEEN HOUSING. 96"STROKE. 8"OPEN HEIGHT. 17"CLOSED HEIGHT. 9"DEPTH OF THROAT. 7"RAM SPEED APPROACH. 300 IPMRAM SPEED PRESS. 20 IPMRAM SPEED RETURN. 225 IPMELECTRIC FOOT PEDAL. YESWIDTH OF BED. 4-1/4"PASS LINE ...more

SERIAL.: P2-100-19206, MODEL.: P2-100-48, TONNAGE.: 100, STROKE LENGTH.: 4", SLIDE ADJUSTMENT.: 4", SHUT HEIGHT.: 20", SPM.: 100-200 VARIABLE, CLUTCH AIR PRESSURE.: 60 LBS., BED SIZE.: 48" X 31", T SLOTTED RAM.: YES, T SLOTTED BOLSTER.: YES, MINSTER CLUTCH.: YES, VOLTAGE.: 240, WINTRISS SMARTPAC2 PRESS AUTOMATION ...more

Make: GEKA, Model: HYDRACROP 100/A, Year: 1900, Machine Location: Illinois, Punching Power: 100 Tons, Punch Throat Depth: 12″, Flat Plate Shear Cutting Capacity: 24″ x 5/8″, Angle Cutting Capacity: 6″ x 6″ x 1/2″, Round Bar Shear Capacity: 2″, Square Bar Shear Capacity: ...more

SKU: 129255, Model: ED9-IW100-1P230-A, Condition: New, Electrical :, Voltage: 230 volts, Phase: Single-phase, Tons: 100 ton, Dimensions: 67.00 (H) x 69.00 (W) x 46.00 (L) inches, Additional :, Stocker Number: ED9-IW100-1P230-A, Amperes: 22 Amp, Angle Shear Max Capacity 1/2": 6 x 6, Angle Shear Work Height: ...more

Vertical Ram Tonnage 250 Ton Opposed Horizontal Rams 150 Tons Each Vertical Press Stroke 26" Vertical Open Height 29" Vertical Shut Height 3" Horizontal Press Stroke. Horizontal Press Stroke Left Side 20" Horizontal Press Stroke Right Side 20" Horizontal Press Open Height 70" Horizontal Press Shut Height 30" ...more

Punch Tonnage Capacity: 75 Tons, Shear Tonnage Capacity: 100 Tons, Max. Angle Size: 6" x 6" x 5/8", Min. Angle Size: 1-1/2" x 1-1/2" x 1/8", Max. Flat Bar: 6" x 5/8", Min. Flat Bar: 2" x 1/4", Max. Punch Size: 1-1/4", Punch Cycle Time: 2 Sec., Shear Cycle Time: 5 Sec., Shear Slug Size: 1/2", In-Feed Speed (X-Axis): 61 ...more

Used 100 Ton Hydraulic Die Spotting Press by HYDRAULIC. s a 34 x 50 bed, 40 stroke, 42.5 daylight opening, and 30 HP hydraulic unit. Includes lower ejector, rollout shuttle table, and console control station. 3,000 PSI max., All Subject To Verification, Approximate Tonnage: 100, Approximate Stroke: 40, Approximate ...more

CAPACITY. 100 TON, THROAT. 15", BED AREA. 24-1/2" L-R x 21" F-B, RAM AREA. 4-1/4" DIAMETER, 6 FOOT LONG TABLE MOUNTED ON BED, TABLE HAS SINGLE ROLLS ON EACH END, ROLL DIA 2-1/2" x 10" W, MOTOR: 20 HP, 575V, 3PH, 60CYC, 1770 RPM, WITH CONTROLS, HYDRAULIC PUMP UNIT: 43" L x 24" W x 44" H, OVERALL SIZE: 86" L x 69" W x ...more

CAPACITY. 150 TON, CAPACITY. 12' x 3/16", STROKE. 3", RAM ADJUSTMENT. 5", RAM + BED. 144" L, STROKES PER MINUTE. 30, THROAT. 8", WIDTH BETWEEN HOUSINGS. 126", ROLLER BALL TAKE AWAY TABLE, BIJUR LUBE, MOTORIZED RAM ADJUSTMENT, 9 FLANGES BOLTED TO RAM, AIR CLUTCH, MOTOR DRIVE: 7.5 HP, 208-230/460V, 3PH, 60CYC, 1760 ...more

ONE PREOWNED NATIONAL 5” UPSET FORGING MACHINE, NEW in 1950'S, Tonnage 1100, Stroke Per Minute 30, Stroke of Machine 15”, Grip Opening 7”, Gather 8 1/8”, Hold 2 ½“, Floor Space-Width 11', Floor Space-Length 11' 10”, Die Space.F-B 24”, Die Space Thickness ...more

POWER TEAM 150 Ton Hydraulic H Frame Press 3 H.P. USA #7704, POWER TEAM 150 Ton Hydraulic H Frame Press 3 H.P. USA #7704, Reference #7704, Tonnage- 150 Ton, Stroke- 7” with plates / 13.13” no plates, Cylinder diameter-4-1/2”, Between frame- 60”, Maximum height under cylinder- 29-1/2”, Bed ...more