Worldwide Machine Tool
Lewis Center, OH 43035
Silver Level Dealer
Surplus Record Dealer Since 2011
Contact
Bill Garbe
About
Worldwide Machine Tool Buys and Sells New and Used Machine Tools. We specialize in all metal working machines. We pay CASH for your surplus machines!Products & Services
- Auctioneers
- CNC Machinery
- Grinders, Surface
- Ironworkers
- Milling Machinery
- Saws
Associations & Affiliations
17 listings in 11 categories
4-Roll Plate Bending Machines
1 Result
72" x 1/4" Bendmak, 4-roll, digital readouts, drop end, cone rolling attachment
Category: 4-Roll Plate Bending Machines
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Bendmak
New Bendmak 6' x 1/4" Four Roll Plate Roll, (All Capacities Are Rated In Mild Steel - 36,000 Yield), Maximum Rolling Capacity. 6' x.315" to a 37.40" Diameter, Maximum Pre-Bending Capacity. 6' x.250" to a 37.40" Diameter, Length. 80", Roll Diameter. 7.48", Main Drive Motor. 4 H.P., Machine Weight. 7,400 ...more
4" x 4" x 3/8" Akyapak #APK-101, 12.4dia. of dies, 3.93" shaft diameter, 16' rolling speed, 15 HP, 5800 lbs.
Category: Angle Bending Rolls
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Akyapak
Model: APK-101
Bed and Knee Milling Machines - Vertical
1 Result
Bridgeport #Series-I, 9" x49" tbl, 3 HP, 36" X, 12" Y, 16" Z, 4200 RPM, R-8, chrome ways, digital read out, 2019
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Bridgeport
Model: SERIES-I
Year: 2019
Bescutter fiber laser cutting machine, 6000 watt, ANCA Control system w/nesting function, water cooled, 3 KW dust exhausting fan, new
Category: CNC Lasers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Bescutter
10,000 Watt New Bescutter Fiber Laser Cutting Machine Model Titan 3015 RC10,000 for sale. BESCUTTER Titan series fiber laser cutting machining is our advanced laser cutting system with full enclosure and exchange table. The fast cutting, energy efficiency and low maintenance add more value to the machine., Efficient ...more
Haas #ST-40L, CNC Turning Center, 35.5" swing, 15" chuck, Live Milling, Chip Conveyor, Misc. Tooling, 2020, low hours
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Haas
Model: ST-40L
Year: 2020
35″ x 80″ Used Haas CNC Lathe Model ST-40L Model Year 2020 NOTE: The following are approximate and we are awaiting confirmation., The Haas ST Series high-performance turning centers were designed from the ground up to provide setup flexibility, extreme rigidity, and high thermal stability., The ST-40L is a ...more
Hardinge #Conquest-CS-42, CNC lathe, 19.5" swing, 1.6" bar, 13.8" centers, 12 turret, 5000 RPM, 10 HP, GE Fanuc O-T
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Hardinge
Model: CONQUEST-CS-42
Max Turning Diameter 9.1″ Max. Distance Between Centers 13.8″ Distance Spindle to Turret 14″ X-Axis Travel 5.45″ Z-Axis Travel 13.65″ Bar Capacity 1.625″ Swing Upper Way Covers 19.5″ Swing Lower Way Covers 14.5″ X-Axis Traverse 472 ipm Z-Axis Traverse 630 ipm Turret ...more
Okuma #Cadet-LNC8, CNC lathe, bar feed, Okuma Control, 220 V., 3-phase, 1997
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Okuma
Model: CADET-LNC8
Year: 1997
Okuma CNC Lathe Model Cadet LNC8 with bar feed: Bar Feed Okuma Control 220V 3Phase 1997.
Okuma #Captain-L370W, CNC lathe, 20.8" swing, 2.44" bore, 14.57" dia., 19.685" lgth, A2-6, OSP-P200L
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Okuma
Model: CAPTAIN-L370W
Max Swing Over Bed 20.86″ Maximum Swing Over Saddle 16.53″ Maximum Turning Diameter 14.57″ Maximum Turning Length 19.685″ X-Axis Travel 10.23″ Z-Axis Travel 20.47″ Spindle Nose A2-6 Spindle Speed Range 45-4,500 RPM Spindle Bore Diameter 2.44″ Spindle Bearing Inner Diameter ...more
Okuma #Genos-L250E, CNC lathe, 17.7" swing, 8" chuck, chuck, 2.6" bore, 11.02" dia., 19.69" lgth, A2-6, 12 turret, 75-3000 RPM, 20 HP, OSP-P300L-R, tailstock, 2014
Category: CNC Lathes and Turning Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Okuma
Model: GENOS-L250E
Year: 2014
Max Swing Over Bed 17.72″ Maximum Swing Over Saddle 11.81″ Maximum Turning Diameter 11.02″ Maximum Turning Length 19.69″ X-Axis Travel 79″ + 5.51″ Z-Axis Travel 20.47″ Spindle Nose A2-6 Spindle Speed Range 75-3000 RPM Spindle Bore Diameter 2.6″ Spindle Motor 20 HP Power ...more
CNC Vertical Bed Mills
1 Result
Atrump #A3-10H, CNC bed mill, 13" x60" tbl., 10 HP, 40" X, 20" Y, 20" Z, #40, 8k RPM, 3-Axis rigid head, Centroid M-400i
Category: CNC Vertical Bed Mills
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Atrump
Model: A3-10H
Table size 13″ x 60″ X travel (longitudinal) 39.9” Y travel (cross) 19.9” Z travel (vertical head) 19.9” Table load capacity 1,000 lbs Spindle motor 10 HP Spindle taper #40 Spindle speeds 8,000 RPM Machine weight 7,000 lbs Standard s: Rigid head design Centroid M-400i control Box square ...more
25" x 96" Kingston #HL2500, geared head lathe, 16" swing over cross slide, 4-jaw 16" chuck, foot brake, 1996
Category: Engine Lathes
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Kingston
Model: HL2500
Year: 1996
25” x 96” Used Kingston Geared Head Lathe Model HL2500 : Swing Over Bed Ways 25″ Swing Over Cross-Slide 16” Distance Between Center 96” Spindle Hole 3-1/8″ Spindle Motor 10 HP Spindle Speeds 25-1,500 RPM Machine Weight 8,000 lbs 25” x 96” Pre-Owned Kingston Geared Head ...more
Horizontal Band Saws
1 Result
10" x 16" Clausing #C250A, automatic horizontal band saw, 1" blade, 2 HP, 70-280 FPM, 1998
Category: Horizontal Band Saws
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Clausing
Model: C250A
Year: 1998
10″ x 16″ Used Clausing Automatic Horizontal Bandsaw Model C250A : Cutting Capacity 10″ x 16″ at 90 degrees Blade Motor 2 H.P. Currently wired 220 Volt 3 Phs Blade Size 1″ Blade Speed 70-280 FPM Weight 2,000 Lbs, 10″ x 16″ Used Clausing Automatic Horizontal Bandsaw Model C250A ...more
Initial and Double Pinch Plate Bending Rolls
1 Result
8' x 3/8" AK Bend, 4 roll, 3/8" pre-bend, 1/2" roll.capacity, hard rolls, digital read out, cone roll.att., new
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Ak Bend
8' x 3/8" AK Bend 4 Roll Double Pinch Hydraulic Plate Roll, (All Capacities Are Rated In Mild Steel - 36,000 Yield), Maximum Rolling Capacity. 8' x.511" to a 31.86" Diameter, Maximum Pre-Bending Capacity. 8' x.393" to a 31.86" Diameter, Maximum Rolling Length. 101", Roll Diameter. 10.62", Main Drive ...more
Reciprocating Surface Grinders - Horizontal Spindle
1 Result
6" x 12" Harig #Super-612, surface grinder, 1 HP, hand operated, permanent magnetic chuck, worklight
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Harig
Model: SUPER-612
6″ x 12″ Used Harig Surface Grinder :, Chuck Size 6″ x 12″, Perm Magnetic Chuck 6″ x 12″, Spindle Motor 1 HP, Weight 1,950 lbs., SKU 1703, Used Harig Surface Grinder Model Super 612 s:, Hand Operated, Work Light, Permanent Magnetic Chuck.
Vertical CNC Machining Centers
3 Results
Atrump #A3-10H, vertical machining center, Centroid Conversational Control, 39.9" X, 19.9" Y, 19.9" Z, 8000 RPM, 16 Station automatic tool changer, 2016
Category: Vertical CNC Machining Centers
Seller: Worldwide Machine Tool
Location: Columbus, OH
Mfr: Atrump
Model: A3-10H
Year: 2016
13″ x 60″ Used Atrump 3 Axis Rigid Head CNC Bed Mill Model A3-10H : Table size 13″ x 60″ X travel (longitudinal) 39.9” Y travel (cross) 19.9” Z travel (vertical head) 19.9” Table load capacity 1,000 lbs Spindle motor 10 HP Spindle taper #40 Spindle speeds 8,000 RPM Machine ...more
Fadal #8030-HT, CNC vertical machining center, 21 automatic tool changer, 82" X, 30" Y, 30" Z, 10000 RPM, #40, 22.5 HP, 82.5" x30" tbl., Fanuc 32 MP, rigid tap
Category: Vertical CNC Machining Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Fadal
Model: 8030-HT
82″ x 30″ x 30″ Used Fadal Vertical Machining Center Model 8030 HT Table Length 82.5″ Table Width 30″ Table Capacity 3,750 Lbs X-Axis Travel 80″ Y-Axis Travel 30″ Z-Axis Travel 30″ Spindle Speed 10,000 RPM Spindle Motor 22.5 HP Spindle Taper BT40 Tool Capacity (ATC) 21 ...more
MAG Fadal #VMC-6030 HT, CNC vertical machining center, 24 automatic tool changer, 60" X, 30" Y, 30" Z, 10000 RPM, #40, 22.5 HP, 2008
Category: Vertical CNC Machining Centers
Seller: Worldwide Machine Tool
Location: Lewis Center, OH
Mfr: Fadal
Model: VMC-6030
Year: 2008
2008 MAG Fadal VMC-6030 HT CNC Vertical Machining Center | 60″ x 30″ x 30″ Travel, 22.5 HP High Torque, 10,000 RPM, CAT40, 24 ATC, 2008 Fadal (MAG) VMC-6030 HT Vertical Machining Center – Category Travels X-Axis (Longitudinal) 60″ (1,524 mm) Y-Axis (Cross) 30″ (762 mm) Z-Axis ...more
