1 - 50 of 300 listings
Featured
Schutte, Hammermill, Ke-40 Lump Breaker, (2) 15 HP Sew Gearmotors, Ra Series Dual Stage Grinding Hammer Mill, 2019
HGR24 | Euclid, OH
Category: Pulverizers and Hammermills
Seller: HGR24
Location: Euclid, OH
Mfr: Buffalo
Year: 2019
Inventory No. 0624-111-0001 Manufacturer Schutte Buffalo Hammermill Name 2019 Schutte Buffalo Hammermill Crusher/lump Breaker Arrival Date 06-19-2024 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Fabrication Condition Used Available Quantity 1 Make Year 2019 Item Ke-40 Lump Braker = 2 15 Hp Sew ...more
Featured
Hippo #69 Cutler-Hammer mill, new, with or without 60 HP motor and starter
Pleasant Hill Grain | Hampton, NE
Category: Pulverizers and Hammermills
Seller: Pleasant Hill Grain
Location: Hampton, NE
Mfr: Hippo
Model: 69
Year: 2025
Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through ...more
Featured
Williams Industrial pulverizer roller mills 200 HP with Whizzer separators & 400 HP main fan
Machinery Scene | Toledo, WA
Category: Pulverizers and Hammermills
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Williams
Model: 200 HP
Used Roller mills with Whizzer separators & 400HP main fans, Industrial Roller mills simultaneous grinding & drying/Turbine Separator, Mills have been dismantled and are stored in our yard., 3 Williams Industrial roller mills, 3 Whizzer separators 40HP fan, (heat source not included), 3 Main fans 400hp, Spare ...more
JUST ADDED!
3MT #PSM, Pellet Mill Feeder - Biomass & Wood Pelleting Applications - Custom Built
3MT | Clare, MI
Category: Pulverizers and Hammermills
Seller: 3MT
Location: Clare, MI
Mfr: 3mt
Model: PSM
Year: 2026
3MT builds custom pellet mill feeding systems for wood and biomass pelleting operations handling materials ranging from clean dry sawdust to low density wood shavings and mixed biomass fiber., Wood and biomass feeding problems are almost always a design issue rather than a material issue. Sawdust flows well when the ...more
Abc Hansen Hippo #1 Cutler-Hammer mill, new, with or without 10 HP motor and starter
Pleasant Hill Grain | Hampton, NE
Category: Pulverizers and Hammermills
Seller: Pleasant Hill Grain
Location: Hampton, NE
Mfr: Abc Hansen
Model: #1
Year: 2025
Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through ...more
Abc Hansen Hippo #1.5 Cutler-Hammer mill, new, with or without 15 HP motor and starter
Pleasant Hill Grain | Hampton, NE
Category: Pulverizers and Hammermills
Seller: Pleasant Hill Grain
Location: Hampton, NE
Mfr: Abc Hansen
Model: #1.5
Year: 2025
Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through ...more
Abc Hansen Hippo #47 Cutler-Hammer mill, new, with or without 25 HP motor and starter
Pleasant Hill Grain | Hampton, NE
Category: Pulverizers and Hammermills
Seller: Pleasant Hill Grain
Location: Hampton, NE
Mfr: Abc Hansen
Model: #47
Year: 2025
Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through ...more
Abc Hansen Hippo #57 Cutler-Hammer mill, new, with or without 40 HP motor and starter
Pleasant Hill Grain | Hampton, NE
Category: Pulverizers and Hammermills
Seller: Pleasant Hill Grain
Location: Hampton, NE
Mfr: Abc Hansen
Model: #57
Year: 2025
Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through ...more
Get email updates for newly added Pulverizers and Hammermills
Pulverizers and hammermills (also known as grinding mills or crushers) break down materials like coal, grain, and minerals into smaller particles through impact and grinding. Common in mining, agriculture, and chemical processing, these machines improve efficiency and prepare raw materials for further refinement. Equipped with rotating hammers or grinding plates, they provide reliable material reduction, enhancing overall processing and production outcomes.
Abc Hansen Hippo baby Cutler-Hammer mill, new, with or without 5 HP motor and starter
Pleasant Hill Grain | Hampton, NE
Category: Pulverizers and Hammermills
Seller: Pleasant Hill Grain
Location: Hampton, NE
Mfr: Abc Hansen
Model: BABY
Year: 2025
Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through ...more
Alpine Augsburg Roto-Plexer #RO-63/18, Mill Grinder, 4 knife, 40 HP, 230/460 V. (2 available)
HGR24 | Euclid, OH
Category: Pulverizers and Hammermills
Seller: HGR24
Location: Euclid, OH
Mfr: Alpine
Model: RO-63/18
Inventory No. 0825-057-0005 Name Alpine Augsburg Roto-plexer Mill Grinder, Model Ro 63/18, 40 Hp Arrival Date 12-16-2025 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Chemical Processing Condition Used Available Quantity 1 Item Used Alpine Augsburg Roto-plexer Mill Grinder, Model Ro 63/18, 4 Knife ...more
Alpine Augsburg Roto-Plexer #RO-63/18, Mill Grinder, 4 knife, 40 HP, 230/460 V.
HGR24 | Euclid, OH
Category: Pulverizers and Hammermills
Seller: HGR24
Location: Euclid, OH
Mfr: Alpine
Model: RO-63/18
Inventory No. 0825-057-0006 Name Alpine Augsburg Roto-plexer Mill Grinder, Model Ro 63/18, 40 Hp Arrival Date 12-16-2025 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Chemical Processing Condition Used Available Quantity 1 Item Used Alpine Augsburg Roto-plexer Mill Grinder, Model Ro 63/18, 4 Knife ...more
Alpine Augsburg Roto-Plexer #RO-63/18, Mill Grinder, 4 knife, 40 HP, 230/460 V.
Federal Equipment Company | Cleveland, OH
Category: Pulverizers and Hammermills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Alpine
Model: RO-63/18
Used Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 4 knife rotor, swing away cover, 40 hp, 230/460 volt motor, blower discharge, serial# 157060.
Alpine Augsburg Roto-Plexer #RO-63/18, Mill Grinder, 4 knife, 40 HP, 230/460 V.
Federal Equipment Company | Cleveland, OH
Category: Pulverizers and Hammermills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Alpine
Model: RO-63/18
Used Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 4 knife rotor, swing away cover, 40 hp, 230/460 volt motor, blower discharge, serial# 132842.
American Pulverizer #4850, hammermill, 15-35 TPH, 400 HP, 48" x 50" rotor, infeed & discharge conveyors
Alan Ross Machinery Corp | Zion, IL
Category: Pulverizers and Hammermills
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: American
Model: 4850
Year: 2018
### rmation, - **Approximate Capacity**: 15-35 Tons per Hour, - **Motor Power**: 400 HP, - **Voltage**: 3-Phase, 60 Hz, 220/440 Volts, - **Weight**: Approx. 44,000 lbs (Plus Conveyors), ### Included Components, - **Infeed and Discharge Conveyors**, - **Spare Motor**, - **Hopper and Base**, ### Functional Design, - ...more
American Pulverizer Co. #L, hammermill, 4 swinging hammers, 11" x9.25" feed throat, 5 HP
Ingalls Process Equipment | Painesville, OH
Category: Pulverizers and Hammermills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: American
Model: L
One (1) used 15 x 9 Hammermill Made by American Pulverizer Company Type L Serial number 5682 Four (4) swinging hammers Outboard roller bearings Opening at feed throat is 11" x 9.25" wide 5 HP belt driven motor, variable speed 3 phase, 230/460 voltage All mounted to a steel base belt guard Chamber is bolt in ...more
American Pulverizer Co. #L, hammermill, 15" dia x 9" wide chamber, refurbished
Ingalls Process Equipment | Painesville, OH
Category: Pulverizers and Hammermills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: American
Model: L
One (1) used American Pulverizer Co. Hammer Mill Manufactured in St. Louis, MO Serial number: 3905 Type: L 15" diameter x 9" wide chamber 9" x 11" inlet New bolt in liner New hammers 4 swinging hammers, 2.5" x 8" Rotor has outboard roller bearings Chamber is hinged and unbolts for easy ...more
American #TRS-24x25-EG-HD-DE, 24" x 25" pulverizer gun blaster, 40 HP, rebuilt 2024
Arlington Machinery | Lake Zurich, IL
Category: Pulverizers and Hammermills
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: TRS-24X25-EG-HD-DE
Used 24" x 25" American Pulverizer Dual Shaft Shredder, Gun Blaster, 40 HP Rebuilt By The Factory In 2024, 100 Hours Since Rebuild 1 3/8" Wide Cutters Model TRS-24x25-EG-HD-DE (2) 20 HP Motors Driven Through Right Angle Gearboxes Approximate Dimensions: Approximate Weight: 7,700 LBS.
American Pulverizer Co. #VSP4, pulverizer, 100 HP, 6 pitch steek belt, 40" wide, cart tipper
Global Equipment International | Chalfont, PA
Category: Pulverizers and Hammermills
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: American
Model: VSP4
Used American Pulverizer for sale, 100HP, 6 Pitch Steel Belt, 40 Wide, Cart Tipper, 56 deep x 49 wide (just short of 50), Pivot point is 58, serial number 7506, Manufacturer AMERICAN PULVERIZAR CO Model VSP4 Condition Used Serial Number 7506 Stock Number 109609.
American Pulverizer #WS, Crusher, Shredder, Hammer Mill, 50HP Drive
Garland Bros Inc | Suwanee, GA
Category: Pulverizers and Hammermills
Seller: Garland Bros Inc
Location: Suwanee, GA
Mfr: American
Model: WS
PLEASE REVIEW: We would ask that potential buyers please examine the photographs carefully, and understand what you are buying. All questions should be submitted prior to your purchase. *Your purchase includes a 30 day warranty.* We cannot negotiate price or terms after the sale has closed. Payment is expected within ...more
American Pulverizer #WS-40, Hammer Mill
Garland Bros Inc | Suwanee, GA
Category: Pulverizers and Hammermills
Seller: Garland Bros Inc
Location: Suwanee, GA
Mfr: American
Model: WS-40
This is an American Pulverizer WS-40 hammer mill without a motor on it. It can accommodate a 200Hp motor up to a 300Hp motor. PLEASE REVIEW: We would ask that potential buyers please examine the photographs carefully, and understand what you are buying. All questions should be submitted prior to your purchase. *Your ...more
American Pulverizer hammermill spare liner set, 15" x 9", 4 hammers included, unused
Ingalls Process Equipment | Painesville, OH
Category: Pulverizers and Hammermills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: American
One (1) unused liner set for 15" x 9" American Pulverizer Hammer Mill Four (4) hammers included Hammer mill sold separately Spare rotors also available, sold separately Please inquire for anything additional.
Andela, 20 ton/hr. glass pulverizing line, with surge hopper, pulverizer, trommel screen, label remover, Vibro Dynamics VSC-XH1-151 micro/level isolator, power feed & transfer conveying system
Perfection Industrial Sales | Elk Grove Village, IL
Category: Pulverizers and Hammermills
Seller: Perfection Industrial Sales
Location: Beaufort, SC
Mfr: Andela
Andela Pulverizing Line, 20 Ton/Hr Capacity, w/ Andela Surge Hopper, Andela Pulverizer, Andela ATROM Trommel Screen, Andela Label Remover, VIBRO DYNAMICS VSC-XH1-151 Micro/Level Isolator, Cullet Drying System w/ 2020 Carrier QAD-3080S Vibrating Fluid Bed Dryer, Power Feed & Transfer Conveyor System, 2020 Camfil ...more
Andritz Sprout #38124, Hammer Mill, 38" diameter x 12" width Grinding Chamber, 125 HP, 460 V
HGR24 | Euclid, OH
Category: Pulverizers and Hammermills
Seller: HGR24
Location: Euclid, OH
Mfr: Andritz
Model: 38124
Inventory No. 0223-089-0008 Manufacturer Andritz Sprout Model No. 38124 Name Hammer Mill Arrival Date 11-03-2023 Dimensions L x W x H (inches) Unavailable Capacity 125 HP Weight (lb.) 1 Category Fabrication Condition Used Available Quantity 1 Item Used Andritz Sprout Bauer Hammer Mill, Model 38124, Carbon Steel ...more
Black & Webster Impact Cutler-Hammer
Yoder Machinery Sales | Holland, OH
Category: Pulverizers and Hammermills
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Black & Webster
SERIAL.50106, MODEL. BS, PHASE. 1, VOLTAGE. 110.
Bliss #4436, 4460, hammer mill, 250 HP, 300 HP, Jacobson hammer mill, Sprout Waldron mills
Continental-Agra Equipment | Newton, KS
Category: Pulverizers and Hammermills
Seller: Continental-Agra Equipment
Location: Newton, KS
Mfr: Bliss
Model: 4436
Bliss Industries #E-4815, Hammer Mill, Carbon Steel, 48" diameter x 15" width rotor w/ 2.5" width x 1/4" thick swinging hammers, 14" x 12" top feed opening & bottom dishcarge, 75 HP, 1755 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bliss
Model: E-4815 ELIMINATOR
Bliss Industries "Eliminator" Hammer Mill, Model E-4815, Carbon Steel construction. Approximately 48 diameter x 15 wide rotor with 2-1/2 wide x 1/4 thick swinging hammers. Includes (2) removable side access doors, 14" x 12" top feed opening and bottom discharge, with 0.150" screen size. Mill is driven by 75 HP ...more
Bliss #E1906, Hammer Mill, 1740 RPM, 13" x 9-1/2" outside dimension, 9" x 6" ID
Frain Industries | Carol Stream, IL
Category: Pulverizers and Hammermills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bliss
Model: E1906
Bliss Model E1906, Heavy duty, mild steel, dual screen, hammer mill, with 576 square inch screen area and up to 1740 rpm production rates – depending on materials and application. a 13″ x 9-1/2″ OD, 9″ x 6″ ID top flanged product in feed with (8) 3/8″ bolt holes on 5-1/2″ ...more
Bliss #ED-4440-TF, Hammer Mill, 44" diameter x 40" width Grinding Chamber, 300 HP, 1785 RPM, 460 V
HGR24 | Euclid, OH
Category: Pulverizers and Hammermills
Seller: HGR24
Location: Euclid, OH
Mfr: Bliss
Model: ED-4440-TF
Inventory No. 1020-056-0001 Manufacturer Bliss Model No. ED-4440-TF Name Bliss Hammer Mill, Model Ed-4440-tf, 300 Hp Arrival Date 10-23-2020 Dimensions L x W x H (inches) Unavailable Capacity 300 HP Electrical 3/60/460 Weight (lb.) 9490 Category Fabrication Condition Used Available Quantity 1 Item Used Bliss ...more
Bliss Eliminator #IE-4442-TF, Hammer Mill
Garland Bros Inc | Suwanee, GA
Category: Pulverizers and Hammermills
Seller: Garland Bros Inc
Location: Suwanee, GA
Mfr: Bliss
Model: IE-4442-TF
This unit does not have a motor on it (designed to handle a 200 Hp motor and up to 450 Hp motor @ 1780 RPM). It has a 44" diameter x 42" wide rotor and approximately 4,800 sq in of screen area. We have some motors that we can install if needed. Pricing will be based on the motor size. TERMS, PLEASE REVIEW: We would ...more
Schutte Buffalo #15300 Hammer Mill, 500 HP, 1800 RPM, 2014
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Buffalo
Model: 15300
Year: 2014
Schutte Buffalo Hammer Mill, 500 HP - Model 15300 powered by a 500 HP, 1800 RPM motor. Previously used for processing recycled carpets and sparingly operated during a two-year period., HP: 500, Chamber Dimensions: 72" Wide X 44 Diameter, Materials of Construction: Carbon Steel, Basis: FOB.
Schutte, Hammermill, Ke-40 Lump Breaker, (2) 15 HP Sew Gearmotors, Ra Series Dual Stage Grinding Hammer Mill, 2019
HGR24 | Euclid, OH
Category: Pulverizers and Hammermills
Seller: HGR24
Location: Euclid, OH
Mfr: Buffalo
Year: 2019
Inventory No. 0624-111-0001 Manufacturer Schutte Buffalo Hammermill Name 2019 Schutte Buffalo Hammermill Crusher/lump Breaker Arrival Date 06-19-2024 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Fabrication Condition Used Available Quantity 1 Make Year 2019 Item Ke-40 Lump Braker = 2 15 Hp Sew ...more
Carter Day / Jacobson #12-FB, Flake Breaker/Reduction Mill w/Exhauster
TNT Industrial | Orange, CA
Category: Pulverizers and Hammermills
Seller: TNT Industrial
Location: Orange, CA
Mfr: Carter Day
Model: 12-FB
Available in stainless or carbon steel. Straightforward design makes for easy maintenance. Pillow block bearings provide smooth, quiet operation. Orange, Calif 92865. 602 W. Southern Ave. TNT Industrial..
CFM, Hammer Mill, Herb Grinder/Pulverizer, 6-1/4" diameter x 3" H Chamber, 9" L x 6" width x 2" H feed pan, 3" x 1-3/4" inlet, 3" diameter Outlet, 3 HP, 3400 RPM, 220 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cfm
Hammer Mill, Herb Grinder/Pulverizer, manufactured by CFM all stainless-steel frame and chamber, which measures 6-1/4" diameter x 3" high. s stainless steel swing type hammers, stainless steel feed pan measures 9" long x 6" wide x 2" high, inlet measures 3" x 1-3/4", side bottom outlet 3" diameter. Driven by 3 HP, 220 ...more
JUST ADDED!
Champion #30x22, Hammer Mill, 125 HP Reliance motor, 3750 RPM, 460 Volts
Garland Bros Inc | Suwanee, GA
Category: Pulverizers and Hammermills
Seller: Garland Bros Inc
Location: Suwanee, GA
Mfr: Champion
Model: 30X22
PLEASE REVIEW: We would ask that potential buyers please view the photographs carefully, and understand what you are buying. All questions should be submitted PRIOR to your purchase. *Your purchase is protected by a 30 day warranty.* We cannot negotiate price or terms after the sale. Payment is expected within 24 ...more
Champion Products, Hammermill, 15 HP, 12" x 24" inlet, Does not include a feed hopper, Outboard roller bearings
Ingalls Process Equipment | Painesville, OH
Category: Pulverizers and Hammermills
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Champion
One (1) used 15 HP Champion Products Hammer Mill 12" x 24" inlet Does not include a feed hopper Outboard roller bearings 4 rows of blades, 6 arms in each row Arms each have a set of bolt-on blades a discharge screen with 1/4" holes 15 HP, 3 phase, 230/460 voltage Test ran well, can be put under power ...more
CME, Hammermill, 400 Hp
Carolina Machinery Sales | Monroe, NC
Category: Pulverizers and Hammermills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cme
CME 400 HP Hammermill, Rotor: 42" long x 39" Diameter.
Colorado Milling Equipment #HMS-VB, Hammermill, 6" dia. inlet, 12" x 12" outlet, 10 HP, 230/460 V.
Cooper Industries Llc | Millwood, WV
Category: Pulverizers and Hammermills
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Colorado Milling Equipment
Model: HMS-VB
ITEM 2940: 10 HP COLORADO MILLING EQUIPMENT HAMMERMILL MODEL HMS-VB, SERIAL 1706101, MODEL HMS-VB, SERIAL 1706101, 10 HP BALDOR ELECTRIC MOTOR 215 TC, 230/460 V 23.6/11.8 A 3 PH 60 HZ, 3490 RPM, 6” DIAM INLET, 12” x 12” OUTLET, PRICE, FOB HAW RIVER, NC………. $ 7,500.00.
Combustion Engineering Raymond, High-Speed Air-Swept Hammermill, 18", FOR PARTS
Aaron Equipment Co | Schaumburg, IL
Category: Pulverizers and Hammermills
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Combustion Engineering
used- c.e. raymond 18" high-speed, air-swept, vertically arranged hammermill. designed for ultra-fine grinding. missing many components, parts machine only.
Cutler-Hammer Mill, Herb Grinder/Pulverizer, 7" diameter x 1.5" H Chamber, 10" L x 9" width x 2" H feed pan, 10" x 1.5" inlet, 4" diameter x 7" outlet, 1/2 HP, 3600 RPM, 110/220 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cutler-Hammer
Hammer Mill, Herb Grinder/Pulverizer, cast aluminum frame with stainless steel chamber. Grinding chamber measures 7" diameter x 1-1/2" high with carbon steel swing type hammers, carbide tipped. Mild steel feeding pan measures 10" long x 9" wide x 2" high. Inlet measures 10" x 1-1/2", bottom side outlet measures 4" ...more
Cutler-Hammer Mill, Herb Grinder/Pulverizer, 10" diameter x 4-1/4" H chamber, 17" L x 14" width x 2" H feed pan, 17" x 4" inlet, 8" diameter x 10" outlet, 2/3 HP, 3600/6305 RPM, 220/380 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cutler-Hammer
Hammer Mill, Herb Grinder/Pulverizer, stainless steel chamber with mild steel frame. Chamber measures 10" diameter x 4-1/4" high. Unit s carbon steel swing type hammers with carbide tips, stainless steel feed pan measures 17" long x 14" wide x 2" high, inlet measures 17" x 4", (2) side bottom outlets measure 8" ...more
Cutler-Hammer Mill, Herb Grinder/Pulverizer, 10" diameter x 4-1/4" H chamber, 17" L x 14" width x 2" H feed pan, 17" x 4" inlet, 8" diameter x 10" outlet, 2/3 HP, 3600/6305 RPM, 220/380 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cutler-Hammer
Hammer Mill, Herb Grinder/Pulverizer, frame is constructed of mild steel with stainless steel screen. Chamber measures 10" diameter x 4-1/4" high. s carbon steel fixed type hammers, carbide tipped. Stainless steel feed pan measures 17" long x 14" wide x 2" high. Inlet measures 17" x 4", side bottom outlet measures 8" ...more
Cutler-Hammer Mill, Carbon Steel, 24" diameter x 10" width Chamber, 12" x 14" feed hopper, 10" x 15" discharge, 25 HP, 1725 RPM, 208/230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cutler-Hammer
Hammer mill, carbon steel product contact parts, driven by 25 HP 208/230/460 volt, 3-phase, 60 Hertz,1725 RPM main motor drive. Unit s 12" x 14" feed hopper. Mill chamber measures 24" diameter x 10" wide. Unit s four sets of 2 fixed slugger hammers with 1" diameter carbon steel screen. Unit has 10" x 15" discharge. ...more
Cutler-Hammer Mill, Carbon Steel, (36) replaceable hammers, 18" diameter Chamber, 4" diameter Feed opening, (3) sets of screens w/ 1/8" perforations, 4" diameter Outlet, 19" off ground, 60 HP, 3556 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Pulverizers and Hammermills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cutler-Hammer
Mill, high speed rotary wheel with (36) replaceable hammers, carbon steel, 18" diameter milling chamber, 4" diameter feed opening with bolt lock. Includes (3) sets of screens with 1/8" perforations. Product discharges out of chute with 4" diameter outlet, 19" off ground. Driven by 60 HP, 230/460V, 3556 RPM through ...more
Carbon Steel Cutler-Hammer Mill, 16" x 18" Feed Opening, 75 HP, On Base
Perry Videx LLC | Hainesport, NJ
Category: Pulverizers and Hammermills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cutler-Hammer
Used carbon steel hammer mill. 75 HP motor, 16" x 18" feed opening, on base., _UNKNOWN_ 75 HP.
Cutler-Hammer Mill, 40" x 18" Feed, 200 Hp, Weg TEFC, AS IS
Aucto | San Francisco, CA
Category: Pulverizers and Hammermills
Seller: Aucto
Location: Montreal, québec
Mfr: Cutler-Hammer
THIS HEAVY-DUTY INDUSTRIAL HAMMER MILL IS DESIGNED FOR DEMANDING SIZE-REDUCTION AND RECYCLING APPLICATIONS, FEATURING A LARGE 40" X 18" FEED OPENING SUITABLE FOR PROCESSING BULKY OR HIGH-VOLUME MATERIAL. IT IS POWERED BY A 200 HP WEG TEFC (TOTALLY ENCLOSED FAN COOLED) MOTOR, WHICH MAKES THE UNIT PARTICULARLY ...more
Bauermeister Cutler-Hammer Mill, 15 KW
Federal Equipment Company | Cleveland, OH
Category: Pulverizers and Hammermills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Cutler-Hammer
Used Bauermeister hammer mill, 15 kw motor, on base.
DFC Crusher Dfc Mill - 12" x12" Opening
Breakthru Surplus | Waukesha, WI
Category: Pulverizers and Hammermills
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Dfc
Hammer Mill 12"x12" Opening 8 hp Motor Message us for shipping instructions!.
Donghauang #DFS-56-60, Hammermill, Reconditioned
Breakthru Surplus | Waukesha, WI
Category: Pulverizers and Hammermills
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Donghauang
Model: DFS-56-60
Model: DFS-56-50 3540 r/min 37kW motor Manufactured in 2022.
Jay Bee #3CB, hammermill, 10 HP, self contained cyclone for dustless grinding
Perry Videx LLC | Hainesport, NJ
Category: Pulverizers and Hammermills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Euromill
Model: 3CB
Year: 1999
Used Jay Bee 3CB Hammermill, Manufacturer: Jay Bee, Model: 3CB, Driven by a 15 HP, 230/460 V, 60 Hz, 3 Phase, 3520 RPM, Includes self-contained cyclone for dustless grinding, JAY BEE 3CB.
Euromilling, Hammermill, 70" x 51" x 68" Dimensions
Perry Videx LLC | Hainesport, NJ
Category: Pulverizers and Hammermills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Euromilling
Used Euromill Hammermill, Manufacturer: Euromilling, Dimensions: 70" x 51" x 68", Click on the link below to see a video of the machine running., EUROMILL _UNKNOWN_.
Fitzpatrick #D, Stainless Steel comminutor, 6" chamber w/ 10.5" diameter rotor, 5 HP
JM Industrial LLC | Millwood, WV
Category: Pulverizers and Hammermills
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Fitzpatrick
Model: D
Used 5HP Fitzpatrick Model D Comminutor Fitz-Mill Stainless Steel, Serial Number: A2237, Stainless steel material in contact with product., Unit is gravity fed with tilt pan into a slanted inlet throat., 6" wide milling chamber with a 10.5" diameter rotor., Mill Rotor: 16 fixed knife/blunt edge blades ...more
Fitzpatrick #D-6, Stainless Steel, screw feed, 10 HP, #22381
Federal Equipment Company | Cleveland, OH
Category: Pulverizers and Hammermills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Fitzpatrick
Model: D-6
Used Fitzpatrick D6 Fitzmill, stainless steel construction, swinging knives with carbide tips, screw feed with.75 H.P. variable speed screw drive, on base with 10 H.P. 230/460 volt main drive, Serial No. 7802.
Fitzpatrick #D6, 316 Stainless Steel comminutor mill, 16 swing knife/impact blades, 7-1/2 HP, mounted on 4 leg mild steel base frame with casters
Frain Industries | Carol Stream, IL
Category: Pulverizers and Hammermills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fitzpatrick
Model: D6
Fitzmill, Model D6, 316 Stainless steel, comminutor mill with production rates per hour – depending on materials, application and operator dexterity. 20" wide x 30" long x 5" deep feed pan, 6" wide x 8" high feed throat, 6” long x 10” wide chamber and (16) swing knife / ...more
