Nevins Machinery Concepts Inc
South Easton, MA 02375-1524
Platinum Level Dealer
Surplus Record Dealer Since 2004
Contact
About
Nevins Machinery Concepts, Inc. has been servicing machine shops and manufacturing facilities since 1979. NMC specializes in the DISPOSAL and ACQUISITION of new or used Capital Equipment in the Metalworking and Plastic Industries. If your production process requires a "special" machine we will work with you to CUSTOMIZE or BUILD a machine to suit your needs. Additional services offered are APPRAISALS, LIQUIDATIONS and LEASESProducts & Services
- Brakes, Press
- CNC Machinery
- Electrical Discharge Machines Ram/Wire
- Fabricating Machinery
- Grinders
- Lathes
- Shears
- Water Jet Cutting Machinery
Associations & Affiliations
20 listings in 13 categories
Bed and Knee Milling Machines - Vertical
1 Result
Acer #3VK, 10" x 50" tbl, 34" long, 16" cross, 16" vert.knee, 5" quill, 20" ram, 3 HP, brand new
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Acer
Model: 3VK
3VK ACER, 50"X10",Long. trav. 34",Cr trav 16",3Hp,60-4500rpm,(Oth sizes available) Our stock number: 430001, ACER, Model: E - Mill 3VK, Working Surface: 50"x10", Longitudinal travel: 34″, Cross travel: 16", Vertical knee travel: 16", Ram travel: 20", T-slot number, size:3 ...more
43" Powermatic #WB-43, 43" Sander, 25 HP 3 PH 230/460V with digital read out
Category: Belt Sanders
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: WB-43
Style (Type) Wide Belt, Maximum Board Width (In.) 43, Maximum Board Thickness (In.) 6, Minimum Board Length (In.) 12, Minimum Board Thickness (In.) 1/8, Feed Rate (FPM) Variable from 15 to 49, Sanding Belt Speed (FPM) 2,625, Sanding Belt Size (In.) 43 x 75, Table Height from Floor (In.) 31-3/8 - 37-3/8, Air Required ...more
Dake #Cut-250, 10" blade, solid round max 90° 1-1/4", left & right 45°, 1 phase, coolant pump, pedestal base, brand new/best pricing
Category: Circular Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Dake
Model: CUT-250
Number 974250-1, Voltage 110V, Single Phase, Horsepower 1.2, Cutting Ability n/a, Maximum blade diameter 10", Maximum vise opening 4", Maximum feed vise opening n/a, Maximum Angle 90°, Slotting n/a, Phase 1, Speeds 44 rpm, Weight 378 lbs, Solid round 90Ëš capacity 1-1/4", Solid round ...more
12" x 36" Jet #E-1236VS, Newall DP700 digital read out, taper attachment, collet closer, brand new
Category: Engine Lathes
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Jet
Model: E-1236VS
Size 12 x 36, DRO: Newall DP700, Taper Attachment, Collet Closer, Swing Over Bed (In.) 12, Swing Over Cross Slide (In.) 7-5/16, Swing Through Gap (In.) 17-1/2, Length of Gap (In.) 9-1/2, Distance Between Centers (In.) 36, Spindle Bore (In.) 1-9/16, Spindle Mount D1-4, Spindle Taper with Sleeve MT5, Number of Spindle ...more
17" x 40" Jet #EGH-1740, Newall DP700 digital read out, taper attachment, collet closer, brand new
Category: Engine Lathes
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Jet
Model: EGH-1740
Size 17 x 40, Accessory 1 Taper Attachment, Accessory 2 Collet Closer, Digital Readout Newall DP700, Swing Over Bed (In.) 17, Swing Over Cross Slide (In.) 11, Swing Through Gap (In.) 24 1/2, Length of Gap (In.) 7-2/3, Distance Between Centers (In.) 40, Spindle Bore (In.) 3-1/8, Spindle Mount D1-6, Spindle Taper with ...more
Horizontal Band Saws
4 Results
10" x 18" Jet #EHB-1018V, variable speed band saw, 2 HP, 230 V., 1 phase, brand new
Category: Horizontal Band Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Jet
Model: EHB-1018V
Cutting Capacity (W x D) (In.) 10 x 18, Round at 90 Degrees (In.) 10, Round at 45 Degrees (In.) 9, Rectangle at 90 Degrees (In.) 18 x 3-1/2, Rectangle at 45 Degrees (In.) 8-1/2 x 9, Square at 90 Degrees (In.) 10 x 10, Square at 45 Degrees (In.) 8-1/2 x 8-1/2, Vise Swivels (Deg.) 45, Head Movement (Deg.) 0, Blade Size ...more
13" x 8" Knuth #ABS320B, fully automatic band saw, 780-3900 RPM, 2 HP, brand new
Category: Horizontal Band Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Knuth
Model: ABS320B
13" x 21" Jet #HBS-1321W, Semi-Auto Horizontal Bandsaw, brand new
Category: Horizontal Band Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Jet
Model: HBS-1321W
Cutting Capacity (W x D) (In.) 13 x 21, Round at 90 Degrees (In.) 13, Round at 45 Degrees (In.) 10-1/2, Rectangle at 90 Degrees (In.) 10 x 21 and 13 x 19, Rectangle at 45 Degrees (In.) 11-1/2 x 10-1/2, Vise Swivels (Deg.) 45°, Blade Speeds (SFPM) 80 - 260, Blade Wheel Diameter (In.) 18, Blade Length (In.) ...more
23.5" x 12" Jet #MBS-1323EVS-H, Semi-Auto dual mitering bandsaw, 230V, 3-Ph, brand new
Category: Horizontal Band Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Jet
Model: MBS-1323EVS-H
Cutting Capacity (W x D) (In.) 12 x 23.5, Round at 45 Degrees (In.) 13, Round at 60 Degrees (In.) 11, Round at 90 Degrees (In.) 13, Rectangle at 45 Degrees (In.) 8 x 16, Rectangle at 60 Degrees (In.) 7 x 12, Rectangle at 90 Degrees (In.) 12 x 23-1/2, Blade Size (In.) 1-1/4 x 0.043 x 172, Blade Wheel Diameter (In.) 16 ...more
4" x 4" x 1/4" Edwards #Jaws-IV, 50 ton, 7" throat, 8-1/8" open, 7" shut height, flat bar/angle shear Plus 12 round punch & die sets, Fabricator protractor
Category: Ironworkers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Edwards
Model: JAWS-IV
for #520000 Edwards 50 Ton Jaws IV Iron Worker (BRAND NEW), Make:Edwards, Model: Jaws IV, Rated Capacity:50 ton, Throat Depth:7", Open Height:8-1/8", Shut Height:7", Stroke:1-1/8", Cycle Time:2 seconds, Electric Motor:Standard 5 HP, 3 Phase, 208/240 v, 1725 rpm, 14 amp, Electric Motor Options:5 HP, 3 ...more
6" x 6" x .5" Edwards 100 ton, angle shear, 1-1/16" dia. in 1" A36 punch capacity, Plus 14 round punch & die sets, Fabricator protractor
Category: Ironworkers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Edwards
Angle Shear Max. Cap. 6" x 6" x 1/2", Angle Shear Work Height 43-15/16", Cylinder 3-1/2" Ram, Dimensions 61-11/16"H x 56-1/8"W x 45" Deep, Flat Bar Shear Max. Capacity 3/4" x 14" or 1" x 10", Flat Bar Shear Max. Round 1-1/4", Flat Bar Shear Max. Square 1-1/4" ...more
Acer #E-Mill Head, 3 HP, 0-4500 RPM inf.variable, 1 or 3 phase, brand new, other Acer equip.avail
Category: Milling Heads
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Acer
Model: E-MILL
BRAND NEW ACER E-MILL TROUBLE FREE INVERTER DRIVE HEAD (part # MO380), AVAILABLE IN: BRIDGEPORT GRAY COLOR (May be available in beige) #430010, FITS BRIDGEPORT & MOST TAIWANESE IMPORTS, MUST MATCH BOLT PATTERN, 3HP Efficient Motor For High Torque Output, C.N.C. Vector Type A.C. Frequency Drive, Infinite 0-4500 RPM ...more
Powermatic #3000B, table saw, 7.5HP, 3Ph, 230/460V, 50" RIP, Accu-Fence, brand new
Category: Table Saws
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: 3000B
Style (Type) Cabinet, Blade Diameter (In.) 14, Arbor Diameter (In.) 1, Arbor Speed (RPM) 4500, Maximum Depth of Cut at 90 Degrees (In.) 5-1/8, Maximum Depth of Cut at 45 Degrees (In.) 3-1/2, Maximum Diameter of Dado (In.) 8, Maximum Width of Dado (In.) 13/16, Table in Front of Saw Blade at Maximum Depth of Cut (In.) ...more
Vibratory Finishers
2 Results
3 cu.ft. Mr Deburr #300DB, 31" L x 13" D x 13.6" W inside, 5" discharge door, brand new with 1 new divider
Category: Vibratory Finishers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Mr Deburr
Model: 300DB
BRAND NEW MR. DEBURR VIBRATORY TUMBLER FINISHING MACHINE W/ 1 NEW DIVIDER, MODEL #: 300DB, Inside tank dimensions: Length 31" x Depth 13" x Width 13.5", Motor: 1 HP, Single Phase, 110 volts @ 60 hertz or 220 volts @ 60 hertz, All of our Vibratory Rectangular Tanks include the following s:, Machine has a 5" round ...more
6.5 cu.ft. Mr. Deburr #600DB, 35" L x 18.75" D x 18" L tank, 3 HP, 3 phase, 230 V., 740 lbs, new with 1 divider
Category: Vibratory Finishers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Mr Deburr
Model: 600DB
Make: Mr Deburr, Model: 600DB, Capacity: 6.5 Cubic Feet, Tank Dimensions: Inside 35”L x 18.75”D x 18”W, Motor: 3HP, 3 Phase, 230 Volt, 8.8 F.L.A. or, 3HP, 3 Phase, 440 Volt, 4.4 F.L.A., W/ 1 NEW DIVIDER, Ship Weight: 740 Lbs, INCLUDES: *5” Round Discharge Door w/ Discharge Trough, *Heavy Gauge ...more
20" x 36" Powermatic #3520C, 2 HP, 1 phase or 3 phase, brand new
Category: Woodworking Lathes
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: 3520C
Size (In.) 20, Swing Over Bed (In.) 20, Swing Over Tool Rest Base (In.) 15-3/4, Distance Between Centers (In.) 36 w/dual bearing center, Headstock Movement Full Length of Bed, Spindle Bore 5/8", Tailstock Bore 3/8", Spindle Taper MT-2, Quill Taper MT-2, Ram Travel Quill Travel 4-1/2", Spindle Threads (In. ...more
42" x 24" Powermatic #4224B, Lamp Kit, 42x24, Bore 5/8", 230V, 3 phase, 3 HP, 40-3500 RPM
Category: Woodworking Lathes
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: 4224B
Style (Type) Leg Stand, Swing Over Bed (In.) 24, Swing Over Tool Rest Base (In.) 19-1/4, Distance Between Centers (In.) 42, Headstock Movement Full Length of Bed, Spindle Bore 5/8, Tailstock Bore 3/8, Spindle Taper MT-2, Quill Taper MT-2, Ram Travel Quill Travel 4-1/2, Spindle Threads (In. x TPI) 1-1/4" x 8 TPI ...more
25" x 10" Powermatic #WB2510, Helical cutter head, 15 HP, 230/460 V. brand new
Category: Woodworking Planers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: WB2510
Style (Type) Floor, Type of Cutterhead Helical, Cutterhead Speed (RPM) 5,000, Cutterhead Diameter (In.) 3-3/8, Cuts Per Minute 30,000, Number of Knives 174 Four-Sided Carbide Inserts, Maximum Depth of Cut (In.) 1/4, Maximum Full Width Depth of Cut (In.) 1/8, Maximum Planing Width (In.) 25, Maximum Planing Thickness ...more
Powermatic #DDS-237, Drum Sander, 10 HP, 3 Ph, 230 V., brand new
Category: Woodworking Sanders
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: DDS-237
Style (Type) Drum, Drum Length (In.) 37, Number of Sanding Drums 2, Drum Speed (RPM) 1,700, Drum Diameter (In.) 6, Conveyor Motor (HP) 1/4, Conveyor Speed (FPM) 8 and 12, Maximum Board Thickness (In.) 5-1/4, Maximum Board Width (In.) 37, Minimum Board Length (In.) 9, Minimum Board Thickness (In.) 1/32, Dust Collection ...more
Powermatic #TS-29, Shaper, 7.5 HP, 3 Ph, 230/460 V., brand new
Category: Woodworking Shapers
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: TS-29
Style (Type) Shaper, Spindle Speed (RPM) 3,000, 4,000, 6,000, 8,000, 10,000, Maximum Spindle Diameter (In.) 1-1/4, Spindles Included 3/4, 1, 1-1/4, Spindle Size Under Nut (In.) 3/4" Spindle (3-1/2), 1" Spindle (6-1/4), 1-1/4" Spindle (6-1/4), Spindle Travel (In.) 7, Spindle Tilt (Deg.) 45 Forward, 5 Back ...more
