23 Results
Battenfeld #BK850/200, horiz.injection molder, 12" max.platen opening, 13.8" max.adj.open stroke, Unilog 4000,1085, #45064
Federal Equipment Company | Cleveland, OH
Category: Plastic Blow Molders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Battenfeld
Model: BK850/200
Used 85 ton Battenfeld horizontal injection molder, model BK850/200, maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", with Unilog 4000 controller, built 1985.
Eceng, Plastic Blow Molder, 2-6 Cavity, 1000 pieces of 500 mm bottles/hr, 2L bottle capacity
Machinery & Equipment Co | Brisbane, CA
Category: Plastic Blow Molders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eceng
Plastic Blow Molder, manufactured by Eceng Machine. Unit can be used from 2-Cavity to 6-Cavity with a capacity of up to 1,000 500ml bottles/hr. Can produce up to 2L bottles. Complete with PLC control panel. Previously used in production of plastic packaging. Very good condition., Basis: FOB.
FlexBlow #FB2-3, Stretch Blow Molding Machine
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Flexblow
Model: FB2-3
Year: 1900
Make: FlexBlow, Model: FlexBlow, Year: 1900, Machine Location: Upon Request, – Flow Regulation: Supreme mold chilling, – Pressure Regulation: Electrical pressure regulation and control for 1st, 2nd blowing and compensation plates, – LP Air Flow: Regulation of LP air-flow for each cavity separately ...more
Graham #GEC-40SP4884, single 40 lb. accumulator head blow molder, 26:1 L/D ratio, 1998
Absolute Machinery Corp | Worcester, MA
Category: Plastic Blow Molders
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Graham
Model: GEC-40SP4884
Year: 1998
Number of Heads: (1) Single | Head Center Spacing: 8" | Head Shot Size Capacity: 40 lbs. | Horsepower: 200 | Head Tooling Size (Min & Max): 5" to 18" | Minimum Shot Height: 16" | Platen Size: 74" x 84" | Daylight Opening (Max): 72" | Clamp Tonnage: 190 | Number of Extruders: (1) One | Screw Size: 4.5" | L/D Ratio: ...more
Hartig #SMP-30-206-3624S40, dual head blow molder, Maco 8000 controller, 1990
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: hainesport, NJ
Mfr: Hartig
Model: SMP-30-206-362
Year: 1990
Used Hartig dual head Blow Molder each with 6 pound capacity. Model #SMP-30 206-3624S40, order number R-5959. New 1990. Has Maco 8000 programmable controller. Unit has a 3" 24/1 air cooled extruder with a Lufkin DH200D-511 gearbox having a reduction ratio of 13.93/1 and a service rating of 173 HP. Gearbox is direct ...more
Get email updates for newly added Plastic Blow Molders
Plastic Blow Molders (also known as blow molding machines) are used to manufacture hollow plastic products by inflating heated plastic into molds. Commonly used in industries like packaging, automotive, and consumer goods, they are ideal for producing bottles, containers, and tanks. Plastic blow molders are essential for creating durable, lightweight, and uniform plastic products efficiently.
Jomar #135E, 135 ton, 3" Egan extruder, 25:1 L/D, 10" Shut Height, s/n #4000-034, 1994, #8145
Arlington Machinery | Lake Zurich, IL
Category: Plastic Blow Molders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jomar
Model: 135E
Year: 1994
Product s, Used Jomar Blowmolding Machine Model 135E S/N 4000-034 Extruder Diameter: 3" Egan Extruder, L/D Ratio: 25:1 Horsepower: 125 Clamp Tonnage:135 Blow Clamp Tonnage: 28 Shut Height:10" Press Stroke: 6" Max Die Set Size: 35.5" Wide x 19" Deep Dual Allen Bradley PLC 2/16 With XY Com Color CRT 460V, 360A New In ...more
JUST ADDED!
Kautex #KB-250/64, Blow Molding Machine, 50 Lb. single head accumulator, 71" x 59" platen, 2 x 4" extruders, 24:1 L/D, 100 HP, 480V., Siemen S5 Control, 1993
Arlington Machinery | Lake Zurich, IL
Category: Plastic Blow Molders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kautex
Model: KB 250/64
Year: 1993
Product s, Used 50 Lb. Single Head Accumulator Kautex Blow Molding Machine, Model KB 250/64 Head Configuration: 50 LBS (Single) Platen Size: 71" x 59" Number Of Extruders: 2 Extruder Size: 100MM Extruder L/D Ratio: 24:1 Extruder Motor: 100 HP, 480V, DC Controller: Siemen S5 New In 1993 Machine Is Running And Can Be ...more
Kautex #KCC2Q-D, extrusion blowmolding, 29" x 18" mold, Beckhoff controller, 2007
Arlington Machinery | Lake Zurich, IL
Category: Plastic Blow Molders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kautex
Model: KCC2Q-D
Year: 2008
Product s, Used Kautex Continuous Extrusion Blow Molding Machine, Model KCC2Q-D 33 Ton Clamp 22.04" Max Daylight 11.81" Min Daylight 35.43" Carriage Shuttle Stroke 10.23" Clamp Stroke Single Layer, 4 Heads, 7" Centers Current Mold Size is 29" L x 18" W Muller Type S490-170 T-PE-TK-IK Head With Servo Cylinder ...more
Magic #ME-L1/ND, Blow Molder, 4 Heads, 1000 cm3 container vol., 30 kN closing, 1,1 Sec. dry cycle, 290/285/280 mm mould dims, 2018
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magic
Model: ME-L1/ND
Year: 2018
Make: Magic, Model: ME-L1/ND, Year: 2018, Machine Location: Upon Request, -Maximum Blown Container Volume: 1000 cm3, -Closing Force: 30kN, -Dry Cycle: 1,1 Sec., -Power Electric: 6 kW, -Opening Travel: 140 mm, -Max. Mould Dimensions:(WxLxH) 290/2×85/280 mm, -Number Of Screws 2, -Extruder:Screw Diameter: 38 L/D ...more
Magplastic #SSB-02 PET Bottle Blow Moulding Machine, 2009
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magplastic
Model: SSB-02
Year: 2009
Make: Magplastic, Model: SSB 02, Year: 2009, Machine Location: Minnesota, Magplastic SSB02 PET Bottle Blow Moulding Machine, 2009, – Previously used for 1.75L, 1L, and.75L PET bottles, – System includes tote dumper, pre-form conveyor, and bottle blower, Machine technical data:, – Press closing force: ...more
Magplastic #SSB-02 PET Bottle Blow Moulding Machine, 2008
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magplastic
Model: SSB-02
Year: 2008
Make: Amsler (Mag-Plastics), Model: SSB02, Year: 2008, Machine Location: Minnesota, Magplastic SSB02 PET Bottle Blow Moulding Machine, 2008, – Previously used for 1.75L, 1L, and.75L PET bottles, – System includes tote dumper, pre-form conveyor, and bottle blower, Machine technical data:, – Press ...more
Nissei #PS40E5ASE, injection blow molder, 7.5 KW motor, 4.3 KW heaer, N8F Control
Bailey Surplus | Santa Rosa, FL
Category: Plastic Blow Molders
Seller: Bailey Surplus
Location: Ponce de Leon, FL
Mfr: Nissei
Model: PS40E5ASE
Rocheleu #R4, blow molder, single head, 10" x 10" usable platen size, 1994
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rocheleu
Model: R4
Year: 1994
Used Rocheleu Model R4 blow molder 200 gram (7 OZ), ands 10" x 10" usable platen size. Single head with Approx 16oz bottle mold included., Manufacturer: Rocheleu, Model: R4, Will accomodate up to 1 Gal. max container size., Hydraulic operation with pump and operator control including Mitsubishi F2 6M programmer. ...more
Serac 7-Cavity Linear Stretch Blow Molder, Capable of speeds ip to 10,000 bottles/hour
Aaron Equipment Co | Wood Dale, IL
Category: Plastic Blow Molders
Seller: Aaron Equipment Co
Location: Wood Dale, IL
Mfr: Serac
used- serac 7-cavity linear stretch blow molder. used for r & d only. capable of speeds ip to 10,000 bottles/hour. container size up to 1.5l. has chiller unit with hood for heat extraction, high air pressure 40 bar (580 psi), low air pressure 7 bar (100 psi). includes elevator for preforms, air conditioning for ...more
Sidel #SB01, PET preform fed blow molder, single head design, reconditioned 2023
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sidel
Model: SB01
Used Sidel PET Preform Fed Blow Molder, Manufacturer: Sidel, Model: SB01, Serial: 78, Single head design with mold for 20 ounce PET bottle, Includes 32-position preform conveyor with 15" long preheat oven and exhaust blower, Year: New 2000, and reported reconditioned January 2023, Used 100 ton CSD horizontal hydraulic ...more
SIG Blow Molder #D-FGT-BP-4/6, 4/6-100
Aaron Equipment Co | Wood Dale, IL
Category: Plastic Blow Molders
Seller: Aaron Equipment Co
Location: Wood Dale, IL
Mfr: Sig
Model: D-FGT-BP-4/6
used- sig blow molder, model#: d fgt-bp-4/6, 4/6-100, clamp force: 22 ton, strike: 160mm, clamp dimensions: max width = 500mm, max height 375mm, and stack height = 330mm, max head/tooling size: single -160mm max, triple x 200mm, and 6 x 100mm, extruder diameter: 100mm, output (approx. 600# per hr.) with screen ...more
Sterling #S-38, Blow Molding Machine, 10" Max. Head Tooling, 3.5" Extruder, 1985
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Sterling
Model: S-38
Year: 1985
Make: Sterling, Model: S-38, Year: 1985, Machine Location: Missouri, Max. Head Tooling 10", Clamp: 44" Wide Between Tie Bars, 32" High, 42" Max Open, 16" Min., 125-Hp. Extruder Drive Motor, 30-Hp. Hydraulic Clamp Motor, 3.5" Extruder, Cast Aluminum Barrel Heaters, Barber Colman Maco 6500 Machine Controls, Barber ...more
JUST ADDED!
Taizhou Baoji International PET Bottle Blowing System, 38g / 38 mm bottles, 2000+ btls/hr 2021
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Taizho Baoji
Year: 2021
Make: Taizho BaoJi, Model: Pet Blowing Machine, Year: 2021, Machine Location: California, 1. PET Blowing Machine, – Model: BI-Q3000, – Serial Number: 2-286, – Manufacture Date: December 2021, – Manufacturer: Taizhou BaoJi Machinery Co. Ltd., – Capabilities:, – Designed for producing ...more
Toyo #Plastar-TM-200G, blow molder, 200 US Ton clamping force, 23.9in3 injection capacity
Bailey Surplus | Santa Rosa, FL
Category: Plastic Blow Molders
Seller: Bailey Surplus
Location: Ponce de Leon, FL
Mfr: Toyo
Model: PLASTAR TM-200G
Uniloy #60043, 6-cavity mold for 32 LDL bottle, trim tooling
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Model: 60043
Used Uniloy 6-cavity mold number 60043 for 32 ounce LDL bottle. Includes trim tooling. Previously used with Uniloy model 350R and 250R blow molders. Part wt. without flash 49 grams., Location: On Site at Perry (Hainesport, NJ - USA).
Uniloy #80200, 4-cavity mold for oval handle bottle, 128 oz., trim molding
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Model: 80200
Used Uniloy #80200 128 ounce 4-cavity mold for oval handle bottle. Designed for use with 350R blow molder. Includes trim tooling. Part wt. 143 grams without flash. 38mm cap size., Location: On Site at Perry (Hainesport, NJ - USA).
Uniloy #90144, 4-cavity mold for a 200 oz. handle bottle, trim molding
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Model: 90144
Used Uniloy 4 cavity mold for a 200 ounce handle bottle #90144. Designed for blow molder with 14.5" centers. Includes trim tooling. Part wt. 250 grams without flash., Location: On Site at Perry (Hainesport, NJ - USA).
Uniloy, 5-cavity plastic bottle mold for 42 oz LDL squeeze bottle, trim molding
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Used Uniloy plastic bottle mold for 42 ounce LDL squeeze bottle. 5-cavity design, includes trim molding. Previously used with Uniloy 350R and 250R blow molders. Includes trim tooling. Part wt. 63.4 grams without flash., Location: On Site at Perry (Hainesport, NJ - USA).
