go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Dmc Woodworking Sanders

warning
14 Results

43" DMC #SD30-RCS110, Sander, 2018

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dmc
Model: SD30-RCS110
Year: 2018
DMC SD30 Composition RCS 110, 230 volt - 3 phase, Frequency 60 hz, "B" version for RCS 95 - RCS 110, Electronic readout in "inches", RA grooved steel calibrating roller, 1st group, Feed belt speed controlled by inverter with 0,75 kW, (1 Hp), 18,5 kW (25 Hp) main motor, Automatic device for feed belt tracking and ...more

43" Dmc #Technosand-1100-1-M3, Top & Bottom Head, 43" x 102" abrasive belt, 60 FPM, 4" part thickness, 2000

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: TECHNOSAND 1100-1 M3
Year: 2000
DMC - TC1100 1M3,.6-Head Top & Bottom Sander, (3) Heads bottom and (3) heads top; 1,100 mm (43") max. width., Head Sequence for Each Top and Bottom Machine, • 1st Head: Rubber-covered contact roll, 30 kW (40 HP) motor., • 2nd Head: Rubber covered contact roll, 22 kW (30 HP) motor., • 3rd Head: ...more

43" DMC #Unisand-K, 4-Head Wide Belt, 44" x 103" abrasive belt, 11- 60 FPM, 5.5 HP, 2007

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND K
Year: 2007
DMC UNISAND K 1100 Wide belt sander, 4-Head, 43" (1,100 mm) max. width cap., Head sequence: (3) Contact rolls and (1) Combi with roller and segmented platen., Heads configuration:, • 1st Head: Helical grooved steel contact roll, 10" dia., 48 HP motor., • 2nd Head: Helically grooved rubber covered contact ...more

43" DMC #Unisand-K-1100, 3-Head Bottom & 3-Head Top Wide Belt, 44" x 103" abrasive belts, 18.5 kW/15 kW roll, 2007

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND K 1100
Year: 2007
DMC UNISAND K (3) Bottom and (3)Top heads wide belt sander., •, 43" max. width. - Bottom Head sequence : 1st Head Contact roll, approx.18.5 KW motor- 2nd Bottom Head Contact roll, 2rd Bottom head, Combination head with roll and platen, approx.15 KW 2-speed motor, belt speed 118 m/sec., • Bottom panel brush. ...more

43" DMC #Unisand-2000, sander, includes Murphy Rogers Dust Dust Collector

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dmc
Model: UNISAND-2000
DMC Unisand 2000, 43" Wide Belt Sander, Includes: Murphy Rogers Dust Dust Collector.

Get email updates for newly added Woodworking Sanders

51" Dmc #Finesand-130-2PO, belt sander, 2-head, 6-40 FPM, 1999

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: FINESAND-130-2PO
Year: 1999
D M C FINESAND 130 2PO WIDE BELT (50" - 90", 2-HEAD):, • :, Orbital Pad Sander, designed for cross-grain scratch removal on style & rail frames; with (2) Orbital Platens & (1) Brush., • Working Capacity: Width 51", height/opening 1/8" - 4-5/8", motorized part thickness adjustment with digital ...more

51" Dmc #Unisand-135-3, 3-Head Wide Belt, 4" part thickness, 82 FPM feed, 52" x 103" abrasive belt, 1996

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND 135 3
Year: 1996
D M C - UNISAND 135,.3-Head Wide Belt Veneer & Finishing Sander., • Data:, 3-Head, 51" (1,300 mm) nominal width cap.; motorized part thickness opening with LED readout; 1/8" to 4" max. - Head sequence: Cross belt, rubber-covered Drum, Pad., Head Configuration/:, • 1st Head: Cross belt with: EPICS 44 ...more

52" DMC #TC-1350-RK, dual head wide belt sander, 53" x 103" long abrasive belts, turbo panel blowers, 1999

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: TC-1350-RK
Year: 1999
DMC - 1350 RK,.TECHNOSAND Dual Head Wide Belt Sander., (2) Heads, 52" width cap. - Head sequence: Contact sanding roll and Segmented platen., Head Configuration:, 1st Head: 7" (175 mm) Dia., 85 durometer rubber-covered calibrating contact sanding roll., 2nd Head: Segmented finishing platen with EPICS (sectional ...more

53" Dmc #SY-TC-1350, 4-Head Wide Belt, 6.8" workpiece thickness, 10" drum, 53" x 103" abrasive belt, 2012

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: SY-TC-1350
Year: 2012
DMC - EuroSystem SY-TC 1350,.Heavy-Duty 4-Head Wide Belt Sander, 53" Width cap. Drum, Drum, and Drum; Segmented Platen., ;, • Max. workpiece width: 53"., • Workpiece thickness: 0.32" - 6.8"., Head Configuration & Feed:, • 1st Sanding Unit: 10” Diameter grooved steel contact drum; 60 HP motor. ...more

53" Dmc #Unisand-2000-M2, 2-Head Wide Belt, 53" x 103" abrasive belt, 60 FPM, 4" opening, 1999

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND 2000-M2
Year: 1999
DMC - UNISAND 2000-M2,.Wide Belt Sander (2) Heads, • 53" Width cap. Drum, Platen., Head Configuration:, • 1st Head: 11" dia. (300 mm) Rubber-Covered Contac; (2) speeds or inverter adjustable 20 - 25 HP; Varied RPM., • 2nd Head: Combination head with drum and graphite covered 2-1/2" finishing platen; 25 ...more

53" Dmc #US-1350-M2RP, Wide Belt Sander, 2 Heads, 170 mm thick, 1370 mm x 2620 mm belts w/ 34/28.5 HP, 3 HP feed, 2006

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: US 1350 M2RP
Year: 2006
DMCTC 1350-M2-RPWide Belt Sander (2) Heads, • 53" Width cap. Drum, Combination Head, • Head Configuration, • 1st Head:10" Dia. helical grooved rubber covered calibrating roller, 26 kw (34 HP) motor., • 2nd Head: Rubber covered contact roller with finishing platen 18 kw ( 28.5 HP) motor., • ...more

53.15" Dmc #Unisand-K, 3-Head Wide Belt, 7.87" working thickness, 53.94" x 103.5" sanding belt, 59.1 FPM, 2007

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND K
Year: 2007
DMC UNISAND K 1350 M2 1,350 mm (53.15") 3-Head Veneer Sander, For lacquer sanding, veneer cut, light calibration cut., NOTE: The following need to be confirmed by Seller., • Working Thickness 4 - 200 mm (0.16" - 7.87")., • 1st Head: TA Cross belt sanding unit, with Electrically-controlled link sanding pad ...more

DMC #Unisand-K, used top and bottom widebelt sander, 2007

Brighton Woodworking Machinery | Uxbridge, ON
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Dmc
Model: UNISAND-K
Year: 2007
2007 DMC Unisand K USK1350 - IM3 + USK1350 used top and bottom widebelt sander.For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing information.Click ...more

DMC & Timesavers, Orbital Sander, 2004 DMC Unisand 2000

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dmc
Orbital Sander Line, 2004 DMC Unisand 2000, Timesavers Model 252-4C.