401 - 450 of 648 listings
JUST ADDED!
19" Powermatic #87, Vertical Band Saw, w/Foot Pedal, 24" x 24" Table
HGR24 | Euclid, OH
Category: Vertical Band Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Powermatic
Model: 87
Inventory No. 0226-067-0017 Manufacturer Powermatic Model No. NO. 87 Name Vertical Band Saw Arrival Date 02-26-2026 Dimensions L x W x H (inches) 51 x 38 x 78 Capacity 19" Weight (lb.) 1280 Category Fabrication Condition Used Available Quantity 1 Serial No. 67-8304 Item W/ Foot Pedal, Table 24x24, With Foot Pedal.
JUST ADDED!
19.5" Powermatic #87, Vertical Band Saw, 1/2" Blade, 24" x 24" Table, 1755 RPM, 230/460 V
HGR24 | Euclid, OH
Category: Vertical Band Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Powermatic
Model: 87
Inventory No. 0226-094-0039 Manufacturer Powermatic Model No. 87 Name Vertical Band Saw Arrival Date 02-27-2026 Dimensions L x W x H (inches) 42 x 51 x 78 Capacity 19 1/2" Electrical 3/60/230/460 Weight (lb.) 2180 Category Fabrication Condition Used Available Quantity 1 Serial No. 3-3540 Item 24" X 24" Table, 1/2" ...more
Do All #16-SFP, Vertical Band Saw, 16" throat, 30-3000 FPM, 120" blade, 1 HP, 3ph, 24" x 24" table
Wheeler Machinery Sales | Pomona, CA
Category: Vertical Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: 16-SFP
DO ALL 16-SFP Vertical Band Saw #7971 #1, Throat: 16 inches, Work height: 10 inches, Table size: 24 inches x 24 inches, Blade speeds: 550 - 3000 FPM High Range, 30 - 32 FPM Low Range, Blade length: 120 inches., Motor: 1 horsepower, 3-phase motor, Weight: 1,500 pounds.
24" Grob #4V-24, Vertical Band Saw, 0.25" Blade width, 24" x 28" Table, 1985
HGR24 | Euclid, OH
Category: Vertical Band Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Grob
Model: 4V-24
Year: 1985
Inventory No. 1125-098-0024 Manufacturer Grob Model No. 4V-24 Name Vertical Band Saw Arrival Date 11-24-2025 Dimensions L x W x H (inches) 59 x 54 x 83 Capacity 24" Weight (lb.) 1427 Category Fabrication Condition Used Available Quantity 1 Serial No. 2448 Make Year 1985 Item Made In Usa, 1/4" Blade Width, 24" X 28" ...more
24" x 31" Hem #V140HM-60, vertical band saw, 20' x 1-1/2" x .50" blade, hydraulic head tilt, 10 HP, 2011
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hem
Model: V140HM-60
Year: 2011
SERIAL. 610198, MODEL. V140HM-60, YEAR NEW. 2011, CAPACITY. 24" WIDE X 31" HIGH, CAPACITY 45 DEGREES LEFT OR RIGHT. 24" X 21" HIGH, CAPACITY 60 DEGREES RIGHT. 24" X 13", CAPACITY 60 DEGREES LEFT. 24" X 13.5" HIGH, CAPACITY (ROUNDS). 24", BLADE SPEEDS (VARIABLE). 0 TO 400 FPM, BLADE SIZE. 1 1/2" X.50" X 20' 0" ...more
Get email updates for newly added Vertical Band Saws
Vertical Band Saws (also known as upright band saws) are cutting machines with a vertically mounted blade used to cut materials like wood, metal, or plastic. Commonly used in industries like woodworking, metalworking, and manufacturing, they are ideal for intricate cuts, contours, and irregular shapes. Vertical band saws are essential for precision cutting and versatile material shaping in various fabrication processes.
24" x 31" Hemsaw #V140HA-60-CTS, automatic vertical tilt-frame production bandsaw, 1-1/2" x 20' 0" x .050" blade, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V140HA-60-CTS
Saw Vertical Tilt-Frame Production Band Saw Saw Capacity 24" W x 31" H @ 90 Miter 24" W x 21" H @ 45 (L) & (R), 24" W x 13.5" H @ 60 (L), 24" W x 13" H @ 60 (R) Blade Size 1-1/2" x 20'0" x.050 THK Blade Drive 10 HP, 220V (48 amps)/3PH or 440V (24 amps)/3PH Electrical Motor Requirement. 220V or 440V AC to be ...more
24" Grob #NS-24, vertical bandsaw, 28" x 24" tilting table, blade welder, S/N 1796
G-2000 | Toledo, OH
Category: Vertical Band Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Grob
Model: NS-24
SERIAL.: 1796, MODEL.: NS-24, THROAT DEPTH.: 24", TABLE SIZE.: 28" X 24" TILITNG, BLADE WELDER.: YES, WEIGHT: 1200 LBS, DIMENSIONS: 56"L X 38"W X 84"T, Machine Type.Saws, Band, Vertical Manufacturer.GROB Model.NS24 Year.N/A Condition.Used.
24" Grob #NS24, vertical band saw, 3 HP, 40-5000 FPM, blade welder, annealer, vari-speed
Heart Of Wisconsin Mchy Co | Nekoosa, WI
Category: Vertical Band Saws
Seller: Heart Of Wisconsin Mchy Co
Location: Nekoosa, WI
Mfr: Grob
Model: NS24
24" Lockformer Bett-Marr #24S, 3 wheel vertical band saw, 24" x 22" table area, 14" wheel, 3/4 HP
Mohawk Machinery Inc | Cincinnati, OH
Category: Vertical Band Saws
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Lockformer
Model: 24S
24" LOCFORMER BETT-MARR "24S" VERTICAL BAND SAW - 3 wheel design - full 24" throat - 20" x 22" table, 24" LOCKFORMER BETT-MARR 3-WHEEL VERTICAL BAND SAW, Serial No 4627, Model 24S, Series Bett-Marr, 3-Wheel Design, Blade Lubrication, CATALOG, Throat Depth 24", Work Table Area 20" x 22", Work Table Height 36", Wheel ...more
24.5" x 21.5" DoAll #DC-620CNC, dual column ball screw tube band saw, 302.25" x 2" x 0.063" blade, 50-500 FPM, 31.5" passline, Siemens Control, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-620CNC
24.5” x 21.5" Tube Band Saw with Siemens Control with Touch Screen Display Smart Programming to Automatically Select Cutting Parameters Based on Material Size and Type Automatic Material Feed Situated Close to Saw Blade Automatic Feed Control with Programmable Feed Rates Work Light Worm Chip Conveyor for Long ...more
25" x 20" Hyd-Mech #V-20, Vertical Band Saw, 231" long x 1-1/2" blade, 65-400 SFM, 20-gallon coolant tank, Evolution TS 50 Control, 2018
Hildebrand Machinery Co Inc | York, PA
Category: Vertical Band Saws
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Hyd-Mech
Model: V-20PT
Year: 2018
HYD-MECH V-20 VERTICAL BAND SAWPRICE: Loaded on Truck, Our Warehouse, York, PA …… $34,500.00, HMC Stock # 26007, Serial No.: VM0818012, Model: V-20PT, Year: 2018, Capacity at 90 Degrees:, Round: 20", Rectangle: 25" x 20", Capacity at 45 Degrees:, Round: 17", Rectangle: 20" x 17", Capacity at 60 Degrees ...more
25" x 20" Marvel #2125A-PC3-60, vertical band saw, 20" working height, 7.5 HP, new
Pioneer Machine Sales | Rosenberg, TX
Category: Vertical Band Saws
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Marvel
Model: 2125A-PC3-60
Work Height 20" Power 7.5 hp.
25" x 25" DoAll #TF2525, hydraulic tilt frame, S/N 356-84241, 8743 Hours
Inter-Plant Sales | Hugo, MN
Category: Vertical Band Saws
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Doall
Model: TF2525
20" Northfield, Band Saw, 25" x 25" table, 1-3/8" x 20" wheel, new
RT Machine | Hughesville, PA
Category: Vertical Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Northfield Heavy Duty 20" Band Saw : Wheel Face : 1-3/8" Table Size: 25 x 25" Front Edge of Table to Teeth of 3/8" Blade: 9-1/2" Capacity Under Guide: 14" Table Tilts to Right : 45 degrees Table Tilts to Left : 10 degrees Horizontal Capacity: 19-1/2" Table Height: 39-1/2" Wheels: Aluminum Disc Brake: Lower Wheel Foot ...more
25" x 28" Marvel #25M1, vertical band saw, 18'10" x 1-1/2" x .050"blade, 60-400 FPM
D & D Industries Inc | Monclova, OH
Category: Vertical Band Saws
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Marvel
Model: 25M1
Year: 1976
MODEL #: 25M1, SERIAL #: F-11425, 25" x 28" RECTANGLE CAPACITY AT 90 DEGREES, 25" ROUND CAPACITY AT 90 DEGREES, 25" x 16" RECTANGLE CAPACITY AT 45 DEGREES, 18'10" x 1-1/2" x.050" BLADE SIZE, 60 - 400 FEET/MINUTE VARIABLE BLADE SPEEDS, 24" MAXIMUM FEED LENGTH PER ONE INDEX, 0 - 350 LBS FEED FORCE, 11'10" LR x 6'10" FB ...more
25" x 28" Marvel #Series-25MI, tilting head,hydraulic clamping, 18'10" x 1.25"blade, 55-340 FPM
Mohawk Machinery Inc | Cincinnati, OH
Category: Vertical Band Saws
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Marvel
Model: SERIES-25MI
25" x 28" MARVEL "SERIES 25/MI" HIGH-SPEED, HEAVY-DUTY TILTING-HEAD VERTICAL BAND SAW, Serial No F-14726, Model 25, Series "25/MI", 25" x 28" MARVEL "SERIES 25/MI" HIGH-SPEED, HEAVY-DUTY TILTING-HEAD VERTICAL BAND SAW, Serial No F-14726, Model 25, Series "25/MI", Tilting-Head Design, Hydraulic Clamping, Infinitely ...more
25" x 30" Hyd-Mech #V-25APC, mitering vertical bandsaw, 1.5" x21' x.05" blade, 78-350 SFM, 10 HP, 2009
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Hyd-Mech
Model: V-25APC
Year: 2009
30” X 25” Automatic Vertical Mitering Bandsaw with LCD PLC Color Touchscreen Control, 60” Shuttle Feed, Chip Conveyor, Integrated Flood Coolant System, Hydraulic Vises and Left & Right Feed Rollers., Cutting Height: 30”, Cutting Width: 25”, Blade Size: 1.5” X 21’ ...more
JUST ADDED!
25" x 30" Hydmech #V-25, Vertical Band Saw w/Two-Way Miter, 1.5" x 252.5" Blade, 44" H Table, 75-350 SFM, 10 HP, 480 V
Machine Tool Technologies | Milwaukee, WI
Category: Vertical Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hydmech
Model: V-25
Spec, Capacity: Round, 90°: 25″, 45°: 21″, 60° Right: 14 1/2″, 60° Left: 13 1/2″, Blade Size: 1 1/2” x 21’ 0.5”, Blade Drive: 10 HP VFD, Machine Voltage: 480 v (all other voltages require optional transformer), Blade Speed: 75-350 SFM, Machine Weight: 10,000 ...more
JUST ADDED!
25" x 30" Hydmech #V-25APC, Automatic Vertical Band Saw w/Two-Way Miter, 1.5" x 252.5" Blade, 44" H Table, 75-350 SFM, 10 HP, 480 V
Machine Tool Technologies | Milwaukee, WI
Category: Vertical Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hydmech
Model: V-25APC
Spec, Capacity: Round, 90°: 25″, 45°: 21″, 60° Right: 14 1/2″, 60° Left: 13 1/2″, Blade Size: 1 1/2” x 21’ 0.5”, Blade Drive: 10 HP VFD, Machine Voltage: 480 v (all other voltages require optional transformer), Blade Speed: 75-350 SFM, Automatic Multi-Indexing: ...more
25" Marvel #2125-APC, vertical band saw, 1.25" x 17.5" blade, 7.5 HP, 50-475 FPM, new
Pioneer Machine Sales | Rosenberg, TX
Category: Vertical Band Saws
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Marvel
Model: 2125-APC
Throat 25" Power 7.5 hp Blade Width 1.25" Blade Length 17.5" FPM 50-475.
25-3/4" x 20" DoAll #2620-4, band mill saw, 40" x 40" T-slotted table, 1-1/2" blade, coolant, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: 2620-4
SERIAL. 208-66124, MODEL. 2620-4, DEPTH OF THROAT. 25-3/4", MAXIMUM UNDER GUIDE. 20", AREA OF TABLE (T SLOTTED). 40" X 40", BLADE SPEEDS (INFINITELY VARIABLE). 50 TO 8000 FPM, WIDTH OF BLADE. 1-1/2", HYDRAULIC BLADE TENSION. YES, HYDRAULIC POST. YES, TABLE FEED PRESSURE (VARIABLE). 18 IPM MAXIMUM, TABLE RETURN SPEED. ...more
26" x 12" DoAll #2612-1, variable speed, 3 HP, chip blower, 5-2000 FPM, 1972, #161778
Machinery Values Inc | Harrison, NJ
Category: Vertical Band Saws
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Doall
Model: 2612-1
Year: 1972
26" DOALL VERTICAL BAND SAWMODEL: 2612-1,… S/N: 285-72149,… NEW: 1972 :THROAT, BAND TO COLUMN. 26" MAXIMUM WORK HEIGHT. 12" BAND WIDTH CAPACITY. 1-1/16" - 1" SAW BAND LENGTH. 175" FILE BAND LENGTH. 177" BAND SPEED RANGE, VARIABLE. 5 TO 2000 FPM TABLE SIZE.″0" ...more
26" x 12" DoAll #V-26, vertical band saw, 0-1600 FPM, 1" W x 176" L blade, hydraulic piece puller
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: V-26
MODEL. V-26, THROAT DEPTH. 26", MAXIMUM WORK HEIGHT. 12", BLADE SPEEDS (VARIABLE). 0 TO 1600 FPM, BLADE SIZE. 1" W X 176" L, TILTING WORK TABLE AREA. 30-1/2" X 30-1/2", TABLE TILT DEGREES. 45 RIGHT / 10 LEFT, PIECE PULLER. HYDRAULIC, MOTOR. 1-1/2 HORSEPOWER.
26" x 12.5" DoAll #26-3, vertical bandsaw, 40-9000 FPM, 1" x 186" blade, power table feed / tilt
Turners Machinery Inc | Santa Paula, CA
Category: Vertical Band Saws
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Mfr: Doall
Model: 26-3
DOALL 26-3 32" x 41" 40-9,000 FPM VERTICAL BANDSAW, Make: Doall, Model 26-3, S/N: 128-58104, Blade / Band Width 1, Blade / Band Length 186, Band Speed Adjustment Grinder - 3 Range Transmission, Speeds 0 - 280, 280 - 1600, 1600 - 10000 Feet Per Minute, Blade / Band Feed Power Table Width 32 x Table Length 41, 440 V / 3 ...more
26" x 13" Doall #2613-V3, Vertical Band Saw, 183" band, 2016
Revelation Machinery | Chicago, IL
Category: Vertical Band Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Doall
Model: 2613-V3
Year: 2016
Make: DO all, Model: 2613 V3, Year: 2016, Machine Location: Illinois, Throat: 26″, Part Height: 13″, 208V, 3-PHASE, 60HZ, 11.7A, BAND LENGTH: 183 IN, LARGEST CONTROL MOTOR: DRIVE 8.3, MFG. DATE: 06/2016, Blade Shear, Grinder and Welder.
26" x 13" DoAll #V26, vertical saw, 1" x 177" blade, 50-1600 SFPM, #15364
Vander Ziel Machinery Sales | Alto, MI
Category: Vertical Band Saws
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Doall
Model: V26
DoAll 26” Vertical Saw, Model V26, Asset # 15364, S/N 26451463, Throat Depth: 26″, Work Height: 13″, Max. Blade Width 1″, Max. Blade Length: 177″, Tilting Table Size: 30″ X 30″, Main Table Tilts: 45° R, 10° L, Blade Speeds: 50 – 1,600 Sfpm (Infinitely Variable) ...more
26" x 13" DoAll #V26, vertical band saw, 1" x 177" blade, 50-1600 SFPM, 2-speed transmission
Aleco Machinery Sales | Milwaukee, WI
Category: Vertical Band Saws
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Doall
Model: V26
(1) Pre Owned DoAll V26 Vertical Band Saw, THROAT DEPTH: 26”, WORK HEIGHT: 13", MAX. BLADE WIDTH 1", MAX. BLADE LENGTH: 177", TILTING TABLE SIZE: 30" x 30", MAIN TABLE TILTS: 45° R, 10° L, BLADE SPEEDS: 50 - 1,600 SFPM (INFINITELY VARIABLE), EQUIPMENT INCLUDED:, VARIABLE SPEED BLADE, DRIVE BLADE WELDER ...more
26" x 16" DoAll #V26, vertical band saw, 1600 FPM, 1" W x 176" L blade, #63110
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: V26
MODEL. V-26, THROAT DEPTH. 26", MAXIMUM WORK HEIGHT. 12", BLADE SPEEDS (VARIABLE). 0 TO 1600 FPM, BLADE SIZE. 1" W X 176" L, TILTING WORK TABLE AREA. 30-1/2" X 30-1/2", TABLE TILT DEGREES. 45 RIGHT / 10 LEFT, PIECE PULLER. HYDRAULIC, MOTOR. 1-1/2 HORSEPOWER.
26" x 21" Hyd-Mech #V-21, automatic vertical bandsaw, 1-1/2" x 19' 4" blade, 10 HP, 65-385 SFM, work light
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-21
, 4 canted head, Go to angle functionality from 60 left to 60 right, Hydraulic head tilt, Cast iron band wheels, Hydraulic DDF system, 2 full stroking hydraulic vises, Hydraulically powered programmable guide arm attached to saw column, Variable vise pressure, 10 color screen HMI. No flipping from screen-to-screen ...more
26" x 21" Hyd-Mech #V-21/26APC, automatic vertical bandsaw, 1-1/2" x 19' 4" blade, 10 HP, 65-385 SFM, work light
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-21/26APC
, 4 canted head, 60 bar feed, left side, Shuttle s automatic multi-indexing up to 60 (120 optional) in a single stroke w/automatic kerf, compensation. Powered by a rack and pinion servo drive, Automatic programmable mitering w/go to angle functionality from 60 left to 60 right, Hydraulic head tilt, Cast iron band ...more
26" x 21" Hyd-Mech #V2126APC, vertical band saw, 19' 4" x 1" blade, 10 HP VFD, 65-385 SFM, 2024
National Machinery Exchange | Newark, NJ
Category: Vertical Band Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hyd-Mech
Model: V2126APC
Year: 2024
SUBJECT TO CONFIRMATION BY THE PURCAHSER.
JUST ADDED!
Doall #2013-V, Vertical Band Saw, 20" Throat, 13" Height, 2 HP, 26" x 26" Table
Aucto | San Francisco, CA
Category: Vertical Band Saws
Seller: Aucto
Location: Lion's Head, ON
Mfr: Doall
Model: 2013-V
THE DOALL 2013-V IS A VERTICAL CONTOUR METAL-CUTTING BAND SAW DESIGNED FOR VERSATILITY IN TOOL ROOMS AND MAINTENANCE SHOPS. IT S A 20-INCH THROAT CAPACITY AND A MAXIMUM WORK HEIGHT OF 13 INCHES. THE MACHINE IS A 2 HP MOTOR AND A DUAL-RANGE TRANSMISSION PROVIDING VARIABLE BAND SPEEDS RANGING FROM 50 TO 5,200 FPM. ITS ...more
26" Dake #987031, Industrial Vertical Band Saw, 1/4" -1" width x 184.25" L Blade, 50-415 FPM low, 550-5000 FPM High, 13" Work Height, 3 HP, 220/440 V, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Vertical Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Dake
Model: 987031
Dake 26″ Industrial Vertical Band Saw, V-26, Inventory # 8456, Model: V-26, Model: 987031, This heavy duty vertical band saw is designed for large production pieces. A 26″ capacity, multi-tilting table, and variable, speeds offer cutting capabilities for many applications. Additional s include a digital ...more
26" DoAll #2612, vertical band saw, power feed table
Peterson Machinery Sales | Casa Grande, AZ
Category: Vertical Band Saws
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Doall
Model: 2612
26" DoAll Mdl. 2612-2H Vert. Band Saw.
29" x 18" Dake #SXC, Work-A-Matic Vertical Band Saw, 1/4"-3/4" width x 120" L Blade, 70/140/270/540 FPM, 9" Blade Travel, 1 HP, 120 V, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Vertical Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Dake
Model: SXC
Dake 29″ x 18″ Work-A-Matic Vertical Band Saw, SXC, Inventory # 8439, Model: SXC, P/N: 988040, The Dake Work-A-Matic vertical band saw is a gravity feed saw that allows for hands-free operation, Blade Width: 1/4″ – 3/4″, Blade Length: 120″, Blade Speed: 70 / 140 / 270 / 540 FPM ...more
30" x 10" Kalamazoo Startrite #30-R-10, vertical bandsaw, 60-3600 FPM
TNT Industrial | Orange, CA
Category: Vertical Band Saws
Seller: TNT Industrial
Location: Orange, CA
Mfr: Kalamazoo
Model: 30-R-10
10 BLADE SPEEDS OF 6O TO 3600 FPM. Manufacturer: Kalamazoo. 21" X 21" AND 10" X 19" WORK TABLES. 30" THROAT, 10" MAXIMUM WORK HEIGHT. CHIP BLOWER. BLADE GRINDER. BLADE CUTOFF..
30" x 10" Kalamazoo #30-R-10 Startrite vertical band saw, 147-1/2" blade, with blade welder, 2 HP
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kalamazoo
Model: 30-R-10
SERIAL. 31654, MODEL. 30-R-10, DEPTH OF THROAT. 30", MAXIMUM UNDER GUIDES. 10", BLADE SPEEDS (VARIABLE). 60 TO 3600 RPM, TABLE TRAVEL. 12" MANUAL, POWER TABLE FEEDS. 0 TO 35 FPM, TABLE FEEDING FORCE. 0 210 LBS, WIDTH OF BLADE. 1/16" MIN TO 3/4" MAX, LENGTH OF BLADE. 147-1/2", AREA OF TABLE. 21" X 21", AUXILIARY TABLE. ...more
30" x 10" Clausing Startrite #30-RWH, vertical band saw, variable speed, 50-3000 FPM, 147" x3/4" x14" wheel, manual table tilt, 2 HP
Machinery Values Inc | Harrison, NJ
Category: Vertical Band Saws
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Startrite
Model: 30-RWH
30" CLAUSING-STARTRITE VERTICAL BAND SAW MODEL:″0 RWH, S/N: 9804 :THROAT SIZE.″0"MAXIMUM WORK HEIGHT. 10"INF VAR BAND SPEED RANGE (2). 50 TO″,000 F.P.M.BAND WIDTH RANGE,. 1/8" -″/4"BAND WHEEL DIAMETER. 14"BAND LENGTH TWO WHEEL. 112" THREE WHEEL.147" TABLE ...more
30" x 12" DoAll #3012-U, Vertical Band Saw, 160" Blade length, 24" x 24" Tilting Table, 50-300/850-5200 FPM, 1 HP, 220 V, 1963
iGAM | Detroit, MI
Category: Vertical Band Saws
Seller: iGAM
Location: Detroit, MI
Mfr: Doall
Model: 3012-U
Year: 1963
The DOALL 3012-U Vertical Band Saw is a used industrial-grade cutting solution manufactured in 1963, built to deliver precision and durability for a wide range of fabrication needs. Featuring a generous 30" throat, 12" work height, and a large 24" x 24" tilting table, this vintage saw combines rugged construction with ...more
30" x 15" Tannewitz #PH, vertical band saw, 30" wheel diameter, 1.25" x17' blade, 5 HP, 7000 SFPM, 26" x28" table, S/N 13750
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
Model: PH
Year: 1962
Throat Capacity 29.5 inches Work Thickness 15 inches Wheel Diameter 30 inches Horsepower 5 HP Blade Speed 7,000 SFPM Table Size 26" x 28" Auxiliary Table Size 14" x 16" TABLE TILT 45 R / 5 L Table Height 38.5 inches Upper Wheel Adjustment 5 inches Blade Width 1/8" x 1.25" Blade Length 17 feet Blade Guides R418A ...more
30" x 15" Tannewitz #PH, vertical band saw, 30" wheel diameter, 5 HP, 700 SFPM, 1.25" x 17' blade, S/N 16081, 1970
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
Model: PH
Year: 1970
Throat Capacity 29.5 inches Work Thickness 15 inches Wheel Diameter 30 inches Horsepower 5 HP Blade Speed 7,000 SFPM Table Size 26" x 28" Auxiliary Table Size 14" x 16" TABLE TILT 45 R / 5 L Table Height 38.5 inches Upper Wheel Adjustment 5 inches Blade Width 1/8" x 1.25" Blade Length 17 feet Blade Guides R418A ...more
30" x 15" Tannewitz #PH, vertical band saw, 5 HP, 7000 SFPM, 26" x28" table, S/N 84065, 1985
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
Model: PH
Year: 1985
Throat Capacity 29.5 inches Work Thickness 15 inches Wheel Diameter 30 inches Horsepower 5 HP Blade Speed 7,000 SFPM Table Size 26" x 28" Auxiliary Table Size 14" x 16" TABLE TILT 45 R / 5 L Table Height 38.5 inches Upper Wheel Adjustment 5 inches Blade Width 1/8" x 1.25" Blade Length 17 feet Blade Guides R418A ...more
30" x 25" Hyd-Mech #V-25, Vertical Bandsaw, 10 HP, 480 V.
FMI Trading LLC | Vinton, TX
Category: Vertical Band Saws
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Hyd-Mech
Model: V-25
Product Information, Band Saws PRODUCT NEW - ON REQUEST: Type:Vertical Coolant system:Yes Angle cut:From 60° to 60° Band Size:1-1/2" x 21'0.5" Engine:10 HP Voltage / Phase:230v o 480v Weight:10,000 lbs Dimensions:96" x 160" x 123" Additional options: ::Fixed 6° canted head ::Variable vise pressure ...more
30" x 25" Hyd-Mech #V-25, vertical band saw, 1.5" x 21' 1/2" blade, 75-350 SPM, Marvel PLC Control, hydraulic vises, hydraulic head elevation
Aleco Machinery Sales | Milwaukee, WI
Category: Vertical Band Saws
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: V-25
Pre Owned Hyd Mech V-25 Vertical Band Saw, Capacity:, @ 90 Degrees 30” X 25”, @ 45 Degrees 21” X 25”, @ 60 Degrees Right 14 1/2” X 25”, @ 60 Degrees Left 13 1/2” X 25”, Blade Size: 1.5" x 21’1/2”, Blade Speeds Approx.: 75 - 350 FPM, Marvel PLC CNC Control ...more
30" x 25" Hyd-Mech #V-25, automatic vertical bandsaw, 1-1/2" x 21-1/2" blade, 10 HP, 480 V., 75-350 SFM, 2 hydraulic vise
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-25
, 6 canted head, Control provides hydraulic powered mitering from 60 left to 60 right, Digital angle display, 2 full stroking hydraulic vises, Powered movable guide arm, 10 HP VFD. True direct blade drive no belts/pulleys, Cast iron band wheels, Replaceable blade brush, Easy access electrical panel and hydraulics ...more
30" x 25" Hyd-Mech #V-25APC, vertical band saw, 75-350 FPM, PLC Control, 40' Roach powered infeed & outfeed, hydraulic vise, hydraulic head elevation
Aleco Machinery Sales | Milwaukee, WI
Category: Vertical Band Saws
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: V-25APC
Pre Owned Hyd Mech V-25APC Vertical Band Saw, Capacity:, @ 90 Degrees 30” X 25”, @ 45 Degrees 21” X 25”, @ 60 Degrees Right 14 1/2” X 25”, @ 60 Degrees Left 13 1/2” X 25”, Blade Size: 1.5" x 21’1/2”, Blade Speeds Approx.: 75 - 350 FPM, PLC CNC Control, Roach ...more
30" x 25" Hyd-Mech #V-25APC, Automatic Vertical Band Saw, Mitsubishi PLC Control, Conveyor, 2009, #44049
Prestige Equipment Corp | Melville, NY
Category: Vertical Band Saws
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Hyd-Mech
Model: V-25APC
Year: 2009
, Model: V-25APC, Maximum Capacity @ 90 Deg (Rectangle). 30" x 25", Maximum Capacity @ 90 Deg (Square). 25" x 25", Maximum Capacity @ 90 Deg (Round). 25", Maximum Capacity @ 45 Deg (Rectangle). 21" x 25", Maximum Capacity @ 45 Deg (Square). 21" x 21", Maximum Capacity @ 45 Deg (Round). 21", Blade (W x L). 1-1/2" x ...more
30" x 25" Hyd-Mech #V-25APC, Auto Vert Band Saw, chip bucket w/ pump, 480 V., 3ph, 2009,
Equilibrium Machinery | Waukesha, WI
Category: Vertical Band Saws
Seller: Equilibrium Machinery
Location: Waukesha, WI
Mfr: Hyd-Mech
Model: V-25APC
Year: 2009
2011 Hyd-Mech Automatic Vertical Band Saw Model V-25APC, Capacity @ 90 degrees: 30” x 25”, Dual direction Auto mitering up to 30 degrees both ways, Overhead bundling, Extended 10’ shuttle infeed, Chip bucket with pump, Outfeed vise, Mist lubrication, Electrics: 480 Volt 3 phase.
30" x 25" Hyd-Mech #V-25APC, automatic vertical bandsaw, 1-1/2" x 21-1/2" blade, 10 HP, 75-350 SFM, 60" automatic multi-indexing, PLC
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-25APC
, 6 canted head, 60 bar feed, left side, Shuttle s automatic multi-indexing up to 60 (120 optional) in a single stroke w/automatic kerf, compensation. Powered by a rack and pinion servo drive., Automatic programmable mitering w/go to angle functionality from 60 left to 60 right, Hydraulic head tilt, Cast iron band ...more
30" x 25" Hyd-Mech #V-25APC-120, automatic vertical bandsaw, tilt frame, 62' powered conveyor, 75-350 FPM, 2014
Westbrook Engineering Co | Warren, MI
Category: Vertical Band Saws
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Hyd-Mech
Model: V-25APC-120
Year: 2014
HYD-MECH V-25APC-120 vertical band saw, 2014 model, used condition. s 30" x 25" capacity at 90 degrees, 10 HP motor, and 120" automatic shuttle feed. Includes Mitsubishi PLC, hydraulic systems, and a 62' roller conveyor, Brand: Hyd-Mech, Model: V-25APC-120, Capacity @ 90 degrees: 30" x 25" (20" x 25" with bundling ...more
