101 - 116 of 116 listings
24" x .5" Torrance #TMC-450, Api Pipe Mill, 21 MPM, many recent upgrades
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Model: TMC-450
Manufacturer: Torrance USA, Model: TMC-450, Diameters: 6 5/8" -24", Thickness Range: 5/32"-1/2", Mill Speed: Up to 21mpm, Steel Grades API: X42, X52, X60, X70, Complete Tube Production Line with the Following Components:, Pit Type Coil Car, Cone Uncoiler, 25 Ton Coil Weight, Peeler Unit, Powered Hold Down Roll, 5 Roll ...more
24" x .625" Torrance / SMS ERW API linear forming cage tube mill, 25'-80' tube length
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Torrance
Manufacturer - Torrance/SMS, Type - ERW Tube Mill, Material - X42-X80, Tube Diameter -10.75" - 24", Entry Strip Width - 31" - 76.5", Wall Thickness - 0.250" - 0.625", Tube Length - 25' - 80' (based on current configuration), Entry Feed line - with Guild accumulator, Edge Treatment - Dual Head SMS Edge Milling ...more
610mm 24" ) x 14" mm Yoder/Mill Tech Rafted API Pipe Mill Line
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Yoder/Mill Tech API Pipe Mill Line, Rafted Stands with Spare Set of Rafts, Upgraded By Mill Tech in 2008, Pipe Diameter: 219mm - 610mm (8" - 24"), Wall Thickness: 4.5mm - 14mm, Grades: API X70, API 5L X42 to PSL, API 5L X65 to PSL, Maximum Line Speed: 20 Meters/Min, Pipe Length: 6 - 18 Meter, Complete Line with:, 40 ...more
32" Rafter, Tube Mill, 4 stands, tooled for 5/16", Miller PC-300 GTAW Pulsar control welder, 220 Volts
FH Machinery Inc | Ivyland, PA
Category: Tube Mills
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Rafter
Number of Stands4 Sizing Stands3 Capstan Diameter32" Motor1 HP 180V DC Electrics220V DimensionsMain Body 42" W x 14" L x 58" H, Rafter Roll Stands, Tooled for 5/16", Miller PC-300 GTAW Pulsar Control Welder, Drawing Capstan with Recoiler, Variable Speed.
60" x 1" SMS #SAWH, 2 step spiral pipe mill, 72" strip width, 45 ton coil weight, 2009
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sms
Model: SAWH
Year: 2009
, MANUFACTURER - PWS (SMS), YEAR - 2009, TYPE - 2-STEP SUBMERGED-ARC WELDED HELICAL (SAWH), PIPE DIAMETER - 24" - 60" (610-1524MM), STRIP WIDTH - 39" - 72" (1000-1850MM), WALL THICKNESS RANGE - " - 1" (6-25MM), MAX COIL WEIGHT - 45 TON, PIPE LENGTH - UP TO 80', MAX GAUGE - API X-80, YIELD STRENGTH - 560 N/mm2 ...more
Get email updates for newly added Tube Mills
Tube Mills (also known as pipe mills or tube rolling machines) are industrial machines used to produce tubes and pipes by shaping and welding metal strips into cylindrical forms. Commonly used in industries like construction, automotive, and oil and gas, these mills manufacture high-quality tubes with precise dimensions and consistent wall thickness. Tube mills are essential for producing large volumes of tubing for structural, mechanical, and fluid-handling applications.
118" x .79" Spiral Welded Tube Factory, 35 Ton
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
SPIRAL WELDED TUBE FACTORY 3000 X 20MM X 35 TON, COIL WEIGHT AND DIMENSIONS, Max. Coil Weight- 35 ton, Material Coil Width- 2000mm, Material Coil Thickness- 7mm to 20mm, Material Coil ID Range- 508mm - 800mm, Material Max Coil OD- 2000MM, SPIRAL WELDING MACHINE CAPACITY, Diameter Range: 800mm to 3000 mm, Thickness of ...more
API Tube Facility, including spiral mill, ERW tube mill & ID/OD pipe coating
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Api
API TUBE FACILITY INCLUDING - SPIRAL MILL, ERW TUBE MILL & ID/OD PIPE COATING, FACILITY FOR SALE, INCLUDING:, 60" SMS 2-STEP SPIRAL SAHW API SPIRAL PIPE MILL, 230,000 SQUARE FOOT FACILITY, EQUIPMENT & BUILDING NEW 2009, X-80 MATERIAL CAPACITY, 24" TORRANCE/SMS ERW API TUBE MILL, 188,000 SQUARE FOOT FACILITY ...more
Livernois Engineering Fin #SDLV-1, tube mills
AM Industrial | Brook Park, OH
Category: Tube Mills
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Livernois
Model: SDLV-1
Livernois Engineering Fin SDLV-1 Tube Mills, Livernois Engineering Fin Mill Machine :, Automatic Feeding for Fin production from Coil Powered Uncoiler.
NCP Tube Level Wind Line
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ncp
MANUFACTURER: NATIONAL COPPER CO., TYPE: LEVEL WIND LINE FOR TUBE, MAXIMUM TUBE O.D. (AS USED): 7/8" (22mm) O.D. x.045" (1.2mm) WALL, THICKNESS MINIMUM TUBE O.D. (AS USED):.312" (8mm) O.D., LINE SPEED: 0 - 1200 FPM (0 - 365m/MIN.), COIL PAYOFF:, TYPE: DRIVEN VERTICAL, MAXIMUM COIL O.D.: 7 FT. (2.1m), COIL I.D. RANGE: ...more
OTO #552, Tube Mill, automatic coil end joiner, vertical floop accumulator, 3 turkstands, 70mm shafts, (3) 100 HP motors
Kent Corporation | North Royalton, OH
Category: Tube Mills
Seller: Kent Corporation
Location: North Royalton, OH
Mfr: Oto
Model: 552
- 10K double uncooiler with coil retainer, - Automatic coil end joiner, - Vertical Floop accumulator, - Coolant section, - (3) x 100HP AC motors and drives, - 70mm shafts, - 3 turksheads, - Spare rafter stands, - Run out table, - Voltage 460/3/60, -Left to right, -Excellent condition, came out of service June 2018, - ...more
Oto Mill Tube and Pipe Production Lines, Unused, Never Installed (3 available)
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Oto
MATERIAL.Carbon steel, STRIP WIDTH.33mm to 110mm, STRIP THICHNESS.0.7mm to 2mm, TUBE DIAMETER.10mm to 24.5mm, SQUARE PROFILE SECTIONS.12 X 12 mm to 20 X 20 mm, RECTANGULAR PROFILE SECTIONS.15 x 10 mm TO 30 X 10 mm, MAXIMUM SPEED.180 m/min, COOLING SYSTEM.Emulsion 600 l/min max, WELDING SET-UP.High Frequency set up ...more
JUST ADDED!
T & H #WU11-9, 3/8" Stainless Tube Mill, 2009
iGAM | Detroit, MI
Category: Tube Mills
Seller: iGAM
Location: Detroit, MI
Mfr: T & H
Model: WU11-9
Year: 2009
This listing is for a 3/8" T&H Lemont WU11-9 Tube Mill., Manufacturer: T & H Lemont, Model: WU11-9, Tube OD Range:.236" 1.000", Finished Tube Diameter:.312", Wall Thickness Range:.012".030", Maximum Tube Diameter:.750", Material Capability: 316L Stainless Steel, Mill Speed: 060 FPM, Passline Height: 43", Mill ...more
Thermatool #TMI-100, Tube mill welder, 1994
AM Industrial | Brook Park, OH
Category: Tube Mills
Seller: AM Industrial
Location: Warren, OH
Mfr: Thermatool
Model: TMI-100
Year: 1994
Thermatool Tube mill welder AM22565, Model: TMI- 100 Serial: 1578, CP No: 100KW, Volt Sec- 13,000, Volts PR. 460, Date- 10/31/1994.
Turek & Heller #WU-11, tubular encapsulated cable tube mill, R to L, 25 FPM, upgraded 2022
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Turek & Heller
Model: WU-11
MANUFACTURER - TUREK & HELLER, TYPE - WU-11 RAFTED TUBE MILL, PRODUCT - TUBULAR ENCASED CABLE, TOOLING - " TEC CABLE & 1/8" TOOLED SPARE RAFT, STANDARD WALL THICKNESS - 0.010"-0.054", MILL SPEED - UP TO 25 FPM, LINE DIRECTION - RIGHT TO LEFT, LITTEL UNCOILER, TUREK & HELLER WU-11 RAFTED FORMING STAND, (6) ...more
Vai/Seuthe, Direct Forming Tube Welding Line, 328 FPM, 2007
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Vai
Year: 2007
, Manufacturer: VAI / SEUTHE, Strip Width: 150mm - 400mm (5.91” - 15.75”), Strip Thickness: 1.5mm - 6.0mm (0.059” - 0.236”), Tensile Strength: 500N/mm2 (72,500 PSI), Line Speed: 100 Meters/Min, Max Square: 100mm x 100mm (3.94” x 3.94”), Square Min: 40mm x 40mm (1.57” x ...more
Direct forming tube welding line #FCF400/6.0-100FCF, automatic tooling change, 2007
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Model: FCF400/6.0-100
Year: 2007
Flexible Cold Forming Rafted Mill with Spare Set of Rafts, Year 2007, Auto Tooling Change, Mair Packaging Line, Thermatool Solid State Welder, Featuring: Octagonal Shape Forming Tooling for the Solar Panel Industry, Strip Width: 150mm - 400mm, Strip Thickness: 1.5mm - 6.0mm, Tensile Strength: 500N/mm2, Line Speed: 100 ...more
