go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Dryers and Coolers

warning
1 - 50 of 124 listings

6" x 48" Radiant Technology Corp (RTC) #M-100, wire mesh continuous dryer, infarent belt, 300°C

Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Radiant Technology Cotp
Model: M-100
one(1) used Radiant Technology Corp. Infared Belt Dryer Model M-100 Serial number 840050 rated for 300 C Belt is 6" wide, 4.5" wide work zone Continous, 42" center to center, 48" overall length Single Phase, 240 voltage Variable speed, power switch, heat range, amp meter.

6" Parker Hiross #MDR33A, air dryer, 170 psi, R-22,6" air inlet, LED display, #55915

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Parker Hiross
Model: MDR33A
SERIAL. 627528 GL, MODEL. MDE33A, MAXIMUM AIR PRESSURE. 170 PSI, P.O. #. 099800224-11, REFRIGERANT. R-22, AIR INLET DIAMETER. 6", DEW POINT. +33 TO +50, LED DISPLAY. YES.

9" x 14" Thomas Conveyor #SC-9-L4/L6, Stainless Steel thermal screw, Hollowflight jacketed processor

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Thomas Conveyor
Model: SC-9-L4/L6
UNUSED Thomas Conveyor Stainless Thermal Screw Heating/Drying Jacketed Processor, Mfg. reference number: 28-0057642-B, Stainless steel construction (316L screw & u-trough, 304L jacket), Surface Finish: standard #2B or #2D & #2 on welds (no grind), Cored hollowflight screw approx. 9" x 14' long, Total ...more

9" diameter Rietz #TL-9-K2210, Stainless Steel Thermascrew steam blancher cooker

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Rietz
Model: TL-9-K2210
Used 9" Dia. Rietz Stainless Steel Thermascrew Steam Blancher Cooker TL-9-K2210, Serial No: T-63570, Non-pressurized blanching system using bottom steam injection across product being conveyed., The 10' long covered U-trough has a 9" square inlet and a 9" wide side chute discharge with dewatering ...more

10" x 6" Overton, double drum dryer, #22447

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Overton
Model: 22447
Used Overton Double Drum Dryer, 10" diameter x 6" face drums, chromed drums, hydraulically operated drum adjustment, end guides, rotary unions, manual knife discharge, independently driven drums with 1 H.P. 230/460 Volt Reeves Variable Speed Drives, serial# 1076.

Get email updates for newly added Dryers and Coolers

Dryers and coolers (also known as drying and cooling units) are machines used to remove moisture and regulate the temperature of various materials, ensuring they reach optimal conditions for processing or storage. Dryers reduce moisture content in materials such as grains, chemicals, and plastics, while coolers lower the temperature of products that have been heated during manufacturing.

10.75" x 131" Carman Industries #ACS-64 LH, fluid bed dryer

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Model: ACS-64
Carman Industries Fluid Bed Dryer model ACS-64 LH Serial 210414-1, Shop Order No: 14941; Customer No: 2871, All stainless steel contact with product., Processor bed (internal) measures 10.75"W X 131"L, Product Inlet: 6" sleeve, Product Discharge: 6" sleeve with manual retension wier gate, Controlled ...more

13" x 195" Rotary dryer, Carbon steel, indirect fired

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Rotary Dryer, 13" diameter x 195" long, mounted on frame, mild steel construction. Includes burner with gas train. Driven by 1 HP Marathon motor, 3 phase, 60 Hz, 230-460/190/380 V, TEFC Enclosed. Previously used in calcium carbonate process., Measurements: 13" diameter x 195" long, Materials of Construction: Carbon ...more

14" x 180" Thermaflite #ESD14-15-VAR, 1100°F, Electric-Scru processor, 2-screw, 316 Stainless Steel, 150 KW, #1272105 (3 available)

Plantex Equipment Co | Alvin, TX
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Thermaflite
Model: ESD14-15-VAR

16" x 120" Hosokawa #SL-16-10, Paddle Dryer, Carbon Steel, 15 HP

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hosokawa
Model: SL-16-10
Hosokawa Bepex Solidaire Paddle Dryer Cooler, Model SJ-16-10, continuous thin-layer paddle dryer. Constructed of carbon steel contact parts. With ultra-high thermal efficiency, its high-speed paddles effectively disintegrate loose agglomerates while preserving particle size. The adjustable paddles grant control over ...more

18" x 36" Sheet dryer

Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
SKU: 139476, Condition: Used.

22" x 80" Syntron #FH-22-C-DT, Stainless Steel magnetic vibrating pan feeder dryer, #16315

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Syntron
Model: FH-22-C-DT
Used 22" W x 80" L Stainless Steel Syntron Magnetic Vibrating Pan Feeder Dryer, Stainless Steel Syntron Vibrating Pan Feeder, Model No: FH-22-C-DT, Serial No:T100996 11/06, 460 Volt, 68 Amp, 60 Hz, Demonstration video on file., Shipping info: One skid, 55" wide x 120" long x 72" high., Weight = ...more

24" x 144" Aeroglide #C1-24-13 XXC, Stainless Steel belt dryer w/ C1 cooling, fines conveyor, 230/460 V., 3-ph.

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Model: C1-24-13

24" x 144" Buhler #C1-24-13-XXC, Stainless Steel belt dryer cooler, screw conveyor fines system, 230/460 V., 3-phase

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Model: C1-24-13-XXC
Used Aeroglide C1 24"W Stainless Steel Belt Dryer Cooler with Fines Conveyor, Serial No: 08017-02, High-capacity continuous cooling system (non-insulated), 5 incline, stainless steel sanitary construction., Top cover with inspection & diffuser panels and an inlet capacitive sensor., Product Inlet: 12" X ...more

24" x 264" Christian Engineering, thermal hollow screw cooler / dryer processor

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Used 24 inch Christian Engineering Thermal Hollow Screw Cooler / Dryer Processor, Outer jacketed U-trough, 25" wide, 29" depth, 22'-0" long, bolt-on sectional cover., Approximate 12" elevation drop to the drive end discharge (25"W X 18" flange)., Single hollow-screw auger with 6" ...more

26" x 65" Bepex Torus #TDUS-26-5, Stainless Steel, 26" dia.x 65" L screw, Carbon Steel jacketed trough 150 psi @ 400°F, rotor @ 150 psi, 1990, #49559

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Bepex
Model: TDUS-26-5
Year: 1990
Used Bepex Torus Disc Dryer, model TDUS 26-5, stainless steel construction, approximately 26" diameter x 65" long screw, carbon steel jacketed trough rated 150 psi at 400 F, rotor rated 150 psi at 400 F, chain and sprocket driven less chain, full stainless steel cover, side end discharge with chute, jacket certified ...more

30" x 144" Bethlehem Porcupine #1P3012JTC, processor, Carbon Steel, 150 psi, shell ATM @ 375°F, jacketed, 150 psi, 230/460 V., #48932

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Bethlehem
Model: 1P3012JTC
Used Bethlehem Porcupine processor, model 1P3012JTC, carbon steel construction, 30" diameter x 12' long rotor rated 150 psi, 142 sq ft surface area on rotor, shell rated atm at 375 f, carbon steel jacket rated 150 psi at 375 f, 66 sq ft surface area on jacket, packing gland shaft seals, full cover with 15" and ...more

30" x 208" Bepex Solidaire #SJ30-14, jacketed paddle dryer polymer processor system, 75 HP

Cooper Industries Llc | Millwood, WV
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Bepex
Model: SJ30-14
ITEM# – JMI18850, The Bepex Solidaire (Model SJ 30-14) has a flexible design for continuously processing solids (powders, polymers & pigments) in chemical or plastics industries. The Solidaire housing is 30″ in diameter and a length of 208″ with a jacketed shell (hot oil). It is fitted with a ...more

30" x 208" Bepex #SJ-30-14, Solidaire Jacketed Paddle Dryer Polymer Processor System, 75 HP, 2 psig vessel, 75 psig jacket

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Bepex
Model: SJ-30-14
Used 75HP Bepex Solidaire Jacketed Fluidizing Paddle Dryer Polymer Processor Sys, The Bepex Solidaire (Model SJ 30-14) has a flexible design for continuously processing solids (powders, polymers & pigments) in chemical or plastics industries. The Solidaire housing is 30" in diameter and a length of 208" ...more

30" x 640' I J White Systems, 9 tier, Stainless Steel spiral, descending, ambient air cooling system, remote control panel

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: I J White Systems
PART OF COMPLETE LINE 5H1360A, I J White Systems (9)-tier, stainless steel, spiral, descending, ambient air cooling system with number of product per hour – depending on materials, application, belt width and speed. All stainless steel contact parts. 30" wide total, 28" wide usable, 1" x 1" ...more

32" x 32" Chamber Dryer, #2956-48

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: 2956-48
Used 32" x 32" x 12" high chamber.

32" x 408" Sandvik, Belt Flaker Cooler/Dryer, Stainless Steel, 24' ft Cooling Area, 3 HP chill & belt, pinch roller feed, casters

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- sandvik belt flaker cooler/ dryer. approximately 32" wide x 34' long. 301 stainless steel contact parts. 24' of cooling area. 3hp chill roll drive. 3hp belt drive. pinch rollers feed in system. mounted on casters. job # 987870.

35" x 144" Custom Metal Craft Inc., polymer rotary coating drum tumbler

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Used 35" Dia. X 12' Long Polymer Rotary Coating Drum Tumbler, Serial No: 17167, Drum is constructed of 3/8" thick UHMW polyethylene with molded internal flighting., 15" diameter product inlet, open-end discharge, continuous flow through., Four-row, 6" polymer tires with stainless steel riding ...more

36" x 48" Carrier Vibrating #OACII-3680S, Stainless Steel fluid bed dryer

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Carrier Vibrating
Model: OACII-3680S
Used Carrier Vibrating 36"Wx10'-4"L Stainless Steel Fluid Bed Dryer OACII-3680S, Serial No: 29799, Non-insulated dryer housing constructed of 304L stainless steel., Installed with 21" X 16" oval in-swing manways, sensor ports (hood & plenum), 6" sight glasses (hood)., Drying Deck: drilled ...more

36" x 96" Savage Brothers, Stainless Steel frame jacketed table top designed to withstand 100 psi, ribbed table

Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Savage Brothers
Savage, 36" x 96L stainless steel frame jacketed table top designed to withstand 100 PSI. Ribbed table top to prevent twisting or deflection during alternate cooling/heating cycles from steam or water source. a 34½" wide x 94½" long working space, hinged perimeter of table and 32" ...more

42" x 120" Beloit / Overton, double drum dryer, chrome plated rolls, 100 psi @ 450°F, 1962

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Beloit
Year: 1962
Double Drum Dryer two Approximate 42" diameter x 120" face chrome plated rolls. Approximate rating 100 psi at 450 degrees Fahrenheit National Board# 1782-2, Certified by Beloit/Overton Machine Co, Built 1962. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge ...more

42" x 120" Beloit, double drum dryer, (2) chrome plated rolls, 100 psi @ 450°F, 1969

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Beloit
Year: 1969
Double Drum Dryer two Approximate 42" diameter x 120" face chrome plated rolls. Rated 160 psi at 450 degrees Fahrenheit, serial #F7651-1, National Board #2291-1, built 1969, certified by Beloit Corporation. Each roll set up for a hydraulic drive. Includes 15hp Hydraulic power pack. Dual knife scraper, top fume hood ...more

42" x 120" Buffalo Technologies, double drum dryer, (2) chrome plated rolls, 160 psi, 1998

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Buffalo Technologies
Year: 1998
Double Drum Dryer two Approximate 42" diameter x 120" face chrome plated rolls. Approximate rating 100 psi at 450 degrees Fahrenheit National Board# 1782-2, Certified by Beloit/Overton Machine Co, Built 1962. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge ...more

42" x 120" PFE Rolls, double drum dryer, (2) chrome plated rolls, 160 psi @ -20 to 650°F, 2006

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pfe Rolls
Year: 2006
Double Drum Dryer two Approximate 42" diameter x 120" face chrome plated rolls, each rated 160 psi at -20 to 650 degrees Fahrenheit, serial #491K. National Board #426, built 2006, certified by PFE Rolls. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides ...more

48" x 108" Con-vey Systems, Continuous Paddle Mixer/Dryer, 100 cu.ft., (26) 10" x 5" x 1-3/4" thick paddles, 40-45 degree angle paddles, 125 HP, 1785 RPM, 230/460 V, qty. 2

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Con-Vey Systems
(2) Continuous paddle mixer/dryer, approximately 100 Cubic feet capacity, jacketed chamber, measures 4' diameter x 9' long, stainless steel chamber with stainless steel paddles. Includes (4) rows of paddles, (26) paddles total, 10" x 5" x 1-3/4" thick paddles are fixed to 6" diameter. Cored center shaft for ...more

48" x 180" Hosokawa Bepex #TDJS-48-15, Stainless Steel, 48" dia.x 15' L screw, 75 psi & FV @ 600°F, rotor @ 520°F, 1995, #49281, 1995

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Hosokawa
Model: TDJS-48-15
Year: 1995
Used Hosokawa Bepex Torus Disc Dryer, model TDJS 48-15, stainless steel construction, approximately 48" diameter x 15' long screw, stainless steel jacketed trough rated 75 psi and full vacuum at 600 f, rotor rated 75 psi at 520 f, chain and sprocket driven with chain less drive and guard, stainless steel cover ...more

52" Stainless Steel Vertical Pellet Cooler, (16) total trays with (13) jacketed, As Is, #70803

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Used 52" diameter vertical pellet cooler, stainless steel construction, (16) total trays with (13) jacketed. As Is.

58" x 23.72" Lyco 58" diameter, Stainless Steel rotary drum steam blancher

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Used Lyco 58" dia. Stainless Steel Rotary Drum Steam Blancher, All stainless steel construction., Helical blanching chamber measures 58" diameter X 280" long., Includes blancher screens with 1/16" perforations., Blancher drive is a 2HP gearmotor & chain (230/460V, 60Hz, 3ph), Overall Dims.: Aprox. ...more

60" x 158" Gouda/Andritz #KD15/40, Double Drum Dryer, steam heated, cast iron drums, (4 available)

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Andritz
Model: KD15/40
Gouda / ANDRITZ KD15/40 double drum dryer system with approximately 60" diameter x 158" face steam heated cast iron drums. Designed for continuous drying applications in food, starch, yeast, protein, chemical, and specialty processing industries. Units reportedly operated less than two years prior to shutdown and ...more

60" x 228" SMS, vacuum paddle dryer, 304L Stainless Steel, jacketed, 1969

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Sms
Year: 1969
SMS vacuum paddle dryer, approximately 2,750-gallon (10,400-liter) working capacity, constructed from 304L stainless steel. Horizontal cylindrical vessel measures approximately 60" diameter × 19' overall length with full-length jacket for heating or cooling. Internal paddle agitator with hollow arms designed ...more

62" x 236" FMC Corp #502-28, link belt spiral roto-louvre rotary dryer kiln

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Fmc
Model: 502-28
Used FMC Link-Belt 502-20 Spiral Roto-Louvre Rotary Dryer Kiln 62" Dia X 19'-8"L, Serial Number: JK 6044, For accurate drying/cooling control and gentle handing of bulk materials., Mild steel dryer shell measuring 5'-2" O.D. X 19'-8" long., Dryer/cooler internals installed with a hollow ...more

62" x 237.6" FMC Link-Belt #502-20, spiral Roto-Louvre rotary dryer kiln, 5 HP inline gearmotor

Cooper Industries Llc | Millwood, WV
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Fmc
Model: 502-20
ITEM# – JMI19984, Serial Number: JK 6044, For accurate drying/cooling control and gentle handing of bulk materials., Mild steel dryer shell measuring 5′-2″ O.D. X 19′-8″ long., Dryer/cooler internals installed with a hollow, helical auger and Ø3/32″ perforated screen. ...more

65" width x 245" L Belt-O-Matic #320B, Belt Dryer, 10000 max CFM, 1 MBTU, 250 F, 5-7 psi, 7.5 HP, 480 V, 2017

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: 320B
Year: 2017
used belt o matic belt dryer, model 320b. 6 5" wide by 245" long; 3 phase/480 volt/40 amps;lp/natural gas; 5-7 psi pressure range; 1,000,000 btu rating; 10,000 maximum cfm; 7.5 hp fan, maximum drying air temperature 250 degrees f. built 2017. last ran wet coffee grounds.

Used model 95" x 95 Counterflow Pellet Cooler

AEC Process Systems Ltd | Collingwood, ON
Seller: AEC Process Systems Ltd
Location: Collingwood, ON
Mfr: Camar
Model: 95 X 95
Used Camar 95 x 95 Counterflow Cooler(copy of Geelen VK 24 X 24KL),capacity 16 - 20 tons per hour,PLC control,adjustable level sensors,hydraulic discharge drive,discharge flanged to suit 12 x 60 crumbler,stainless dsteel side and top panels,airlock feed,standard stationary distributor.

96" x 336" Raymond #16 Air Heater/furnace

A M King Industries | Oroville, CA
Seller: A M King Industries
Location: Oroville, CA
Model: 16
RAYMOND #16 Air Heater/Furnace, 8' dia. x 28' long.

102" x 540" Proctor & Schwartz, perforated Stainless Steel belt, 3-zones, steam heated, #1270590

Plantex Equipment Co | Alvin, TX
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Proctor & Schwartz

108" x 156" Wyssmont #N-28, Turbo-dryer, Stainless Steel, 9' 10", (28) 78" diameter Trays, 5.5" x 23" flange discharge, 1.5/3 HP, 230/460 V

JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Wyssmont
Model: N-28
Used Wyssmont Turbo-Dryer Model N-28, Serial No: J-256, Product contact materials are 304 stainless steel., Structural steel support frame with 2" thick insulated panels., Base area is a ten-sided shape measuring 9'-6" across corners and a 13'-10" roof height., Dryer Trays: quantity of 28, diameter ...more

117" x 780" Aeroglide #C1-120-65RGC, dryer, apron, Natural gas, 2005

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Aeroglide
Model: C1-120-65RGC
Year: 2005
Aeroglide Dryer Model C1 120-65 RGC, Serial Number 05153-02, manufactured in 2005. Constructed from 304 stainless steel with a food-grade endless belt and direct shaft-mounted reducer drive. s dual plenum drying/roasting zones and single plenum cooling zone. Dimensions: 65'2" L x 15'8" W (frame) x 15'4" H ...more

125" x 384" Heil, Wood Chip Dryer Separation System, 8 tons/hr. Production, 24 MBTU burner, 200 HP

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Heil
used- wood chip dryer separation system. approximate 8 tons/hour production of dry material at 50% inlet moisture. consists of: heil triple pass drum dryer, 10.5 x 32; 24,000,000 btu jackson webb burner; 200hp motor; (2) dust collectors; screw conveyor; belt conveyor. previously used for wood chips. was set up but ...more

156" x 720" Complete drying system, rotary dryer, Stainless steel, tri0ple pass, Natural gas or propane (2 available)

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Complete stainless steel rotary drying system composed of dual (2) 13 X 60 stainless steel triple-pass rotary drum dryers. System includes trunnions and drives, controls, motors, 70 million btu natural gas burners with max thermal output of 42.200.000 kj/h, discharge cyclone, multi-clones, fans with motors, stack, all ...more

3V Cogeim #Totem-Reactor, 50 gallon Stainless Steel totem filter dryer/reactor, 1988

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: 3v Cogeim
Model: TOTEM-REACTOR
Year: 1988
Used Approximately 0.3 Square Meter Stainless Steel 3V Cogeim Totem Filter Dryer/Reactor, Manufacturer: 3V Cogeim, Model: Totem Reactor, Serial: 388, Year: 1988, Vessel Manufacturer: Laithermik, National board: 3, Internal pressure: 87/FV @ 366F, Jacket pressure: 150 psi @ 366F, Top, center-mounted agitator, 1988 3V ...more

Colortronic Dryer #CDAA50/30M, CSL11 loader & drying hopper, 30 cfm

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Model: CDAA50/30M
Used 30 CFM Colortronic Dryer CDAA50/30M Hopper CD-1.70M CSL11 loader 3.7kW Process Heater 1.2kW Regeneration Heater 0.5 HP Blower 230/3/60, 18 FLA ACS Group eSMART07M HMI, Control Panel Alarm, OFF/ON/-XX Toggle Switch, E-STOP AEC Vacuum Hopper, Model SRC02, S/N: 36B1021 115V Control Circuit Outlet/Inlet Size: 2" ...more

Colortronic Dryer #CDAA50/30M, hopper, Colotronic CD-1.70M CSL11 loader

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Model: CDAA50/30M
Used Colortronic Dryer CDAA50/30M Hopper CD-1.70M CSL11 Series 1 AutoLoader 30 CFM 3.7kW Process Heater 1.2kW Regeneration Heater 230/3/60, 17FLA Colotronic CD-1.70M Drying Hopper, S/N: 43E0905 Digital Omron Process Temperature Gauge, Dew Point Gauge Dryer OFF/ON/Start Toggle Switch Control, Alarm/Silencer, Autoloader ...more

Colortronic Dryer with AEC Autoloader SLC04 & Drying Hopper

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Used 30 CFM Colortronic Dryer with AEC Autoloader SLC04 And Drying Hopper Airflow: 50 m³/hr 3.7kW Process Heater 1.2kW Regeneration Heater 0.5 HP Blower 230/3/60, 17.7 FLA AEC SLC04 Autoloader, S/N: 36H1493 115V Control Circuit Colortronic CD-1.7 Drying Hopper, S/N: 43E1535 Digital Omron Process Temperature ...more

Aljet #10-Thermajet, Flash Dryer System, Carbon Steel

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Aljet
Model: 10 THERMAJET
Used Aljet Thermajet Carbon Steel Flash Dryer System, Manufacturer: Aljet, Model: 10 Thermajet, Material of construction: cabron steel, System includes: inlet blower, dryer, rotary feeder, dust collector, exhaust blower, and scrubber, diesel fired., ALJET 10THERMAJET.

B.V. Speciaal Roesivriustall Industrie, 5 cu.ft. Stainless Steel conical dryer, 1990

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: B.v. Special
Year: 1990
Used Approximately 5 Cubic Foot Stainless Steel Conical Dryer, Manufacturer: B.V. Speciaal Roesivriustall Industrie, National Board: 147, Serial: 08892757, Year: 1990, Internal pressure: 30 psi @ 302F, Jacket pressure: 30 psi @ 302F, Mounted in a stainless steel frame, 1990 B. V. SPECIAAL ROESIVRIUSTALL INDUSTRIE 5 ...more