401 - 450 of 970 listings
19" x 78" LeBlond #Regal, engine lathe, 38-1500 RPM, 5C collet closer, Bison 3-jaw chuck, 1-49/64" hole
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
, 19" X 78" LEBLOND REGAL engine lathe with 3-jaw chuck & 5C closer. s: 19.5" swing, 78" centers, 38-1500 RPM spindle speeds, 10 HP motor, thread dial, chip pan, and tailstock. Ideal for precision machining tasks. Serial: 2D1199. Used condition., Spec Sheet:, 19" X 78" LEBLOND REGAL ENGINE LATHE, SERIAL : 2D1199 ...more
19" x 78" Leblond Makino #Regal, Engine Lathe, 12-1/4" swing over cross slide, 3-1/16" spindle bore, 12" 3-jaw chuck, 17" face plate, 10 HP, 1600 RPM, 2-axis Acu-Rite digital read out, 440 Volt, 1992
Naab Sales Corporation | Blaine, MN
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Leblond
Model: REGAL
Year: 1992
HERE WE HAVE:, NICE WELL TOOLED 19″ x 78″ LEBLOND MAKINO SERVO-SHIFT ENGINE LATHE, W/ 3-1/16” SPINDLE BORE, 2 AXIS ACU-RITE DIGITAL READOUT, MAKE: LEBLOND MAKINO, MODEL: 19″ REGAL, 19X78, SERIAL NUMBER: 15E-484, NEW IN: 1992, HOLE THRU SPINDLE: 3-1/16″, SWING OVER BED: 19-1/4″ ...more
19" x 78" Leblond #Regal, Engine Lathe, 10HP, 38-1500 RPM, 1-49/64" bore,
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: REGAL
THIS LEBLOND REGAL IS A 19" X 78" ENGINE LATHE. ITS TECHNICAL CAPABILITIES INCLUDE A 19-1/2" SWING OVER WAYS AND A 12-1/4" SWING OVER THE CROSS SLIDE, WITH A GENEROUS 78" DISTANCE BETWEEN CENTERS. THE MACHINE IS A 10 HORSEPOWER MOTOR. THE SPINDLE OFFERS TWELVE SPEEDS RANGING FROM 38 TO 1500 ...more
19" x 78" LeBlond #Regal, Engine Lathe, 19-1/2" Swing, 1600 RPM, 12" 6-Jaw Chuck, 10 HP, 1980
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1980
SERIAL. 12E-128, MODEL. REGAL, YEAR NEW. 1980, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 3-1/16, CHUCK. 12" 6 ...more
19" x 78" LeBlond #Regal, engine lathe, 12-1/2" swing over cross slide, 3-jaw 10" chuck, roller type steady rest, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL.6E 443MODEL. REGALSWING OVER BED. 19"SWING OVER CROSS SLIDE. 12-1/2"DISTANCE BETWEEN CENTERS. 78"SPINDLE SPEEDS. 25 TO 1000 RPMHOLE THROUGH SPINDLE. 1-13/16"THREADS. 2 TO 112 TPIFEEDS.0023 TO.104 IPRTHREAD DIAL. YESCHUCK. 10" 3 JAWSTEADY REST. ROLLER TYPEMOTOR. 7-1/2 HORSEPOWER.
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
19" x 78" LeBlond #Regal, engine lathe, 13" swing over cross slide, 4-jaw 15" chuck, 6" roller type steady rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 5E290, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1000 RPM, FEEDS. ().0023 TO.132 IPR, THREADS. () 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-3/4", 4-JAW CHUCK. 15", TAPER ATTACHMENT. YES, STEADY REST. 6" ROLLER TYPE, HARDEN ...more
19" x 78" LeBlond #Regal, Engine Lathe, Tool Post, Chuck, 25-1000 RPM
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Leblond
Model: REGAL
Year: 1900
Make: LeBlond, Model: Regal 19" x 54", Year: 1900, Machine Location: Wisconsin, Swing over Bed & Carriage Ways: 19 1/4”, Swing over Cross Slide: 12 1/4”, Distance Between Centers: 54, Spindle Speeds: 25-1000 RPM, Bed Length: 8’3”, Bed Width: 14 3/8”, Bed Depth: 11 1/2”, Carriage ...more
19" x 78" LeBlond #Regal, lathe, 1-49/64" spindle bore, 12-1/4" swing over cross slide, 7-1/2 HP, #15736
Vander Ziel Machinery Sales | Alto, MI
Category: Engine Lathes
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Leblond
Model: REGAL
LeBlond 19” x 78” Regal Lathe, 1 49/64” Spindle Bore, Serial # 5E-271, Asset # 15736, Swing over Bed & Carriage Ways 19 1/4”, Swing over Cross Slide 12 1/4”, Distance Between Centers 78”, Spindle Speeds (12) 25-1000 RPM, Spindle Bore 1 49/64”, Spindle Mores Taper No. 4 ...more
19" x 78" Leblond Regal #Servo-Shift, 3-1/16" hole, 40-1600 RPM, steady rest, 3 & 4-jaw chuck, 10 HP, 1979
Piedmont Machy of Charlotte | Charlotte, NC
Category: Engine Lathes
Seller: Piedmont Machy of Charlotte
Location: Charlotte, NC
Mfr: Leblond
Model: SERVO-SHIFT
Year: 1979
19" x 80" Leblond #6E-REGAL, engine lathe, 12.25" swing over cross slide, 80" centers, 1.8" bore, 2x Steady Rest, 220 V., chip pans, tailstock
Dominion Air & Machinery Co | Roanoke, VA
Category: Engine Lathes
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Leblond
Model: 6E-REGAL
19" x 80" LeBlond #8F, engine lathe, 11" swing over cross slide, 4-jaw 16" chuck, 7.5 HP, digital read out, #56205
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: 8F
Year: 1973
SERIAL. 8F281, MODEL. 8F, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 11", CENTER DISTANCE. 80", SPINDLE SPEEDS. (12) 25 TO 1000 RPM, FEEDS. (48).0032 TO.104, THREADS. (48) 2 TO 64 TPI, SPINDLE HOLE. 1-3/4", CHUCK. 16" 4 JAW, STEADY REST. 5-1/2", TAPER ATTACHMENT. YES, THREAD DIAL. YES, HARD WAYS. YES, 2 AXIS ...more
19" x 80" LeBlond #Makino, engine lathe, 12-1/4" swing over cross slide, 3-jaw 15" chuck, 10 HP, taper attachment, 2001
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
Year: 2001
SERIAL. 15E188, MODEL. MAKINO, NEW. 2001, SWING OVER WAY. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. 30 TO 1600 RPM, FEEDS.0018 TO.104 IPR, THREADS. 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 3", 3 JAW CHUCK. 15", HARD WAYS. YES, TAPER ATTACHMENT. YES, 2 SPEED TAILSTOCK. YES ...more
19" x 80" LeBlond #Makino, engine lathe, 12-1/4" swing over cross slide, 3 & 4-jaw chuck, digital read out, 1991, #74706
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO
Year: 1991
SERIAL. 15E368, MODEL. MAKINO, YEAR NEW. 1991, SWING OVER WAY. 19", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. 40 TO 1600 RPM, FEEDS.0018 TO.104 IPR, THREADS. 2 TO 112 TPI, 3 JAW CHUCK & 4 JAW. 12" & 15", HARD WAYS. YES, STEADY REST 3 POINT ROLLER. 6" & 9-1/2", 2 SPEED ...more
19" x 80" LeBlond #Regal, engine lathe, 13" swing over cross slide, inch/metric threads, 3-jaw 12" chuck, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 11E-304MODEL. REGALACTUAL SWING OVER BED. 19-1/2"SWING OVER CROSS SLIDE. 13"DISTANCE BETWEEN CENTERS. 78"HOLE THRU SPINDLE. 3-1/16"SPINDLE SPEEDS. (12) 40 TO 1600 RPMFEEDS (ENGLISH). (48).0018 TO.104 IPRTHREADS (ENGLISH). (48) 2 TO 112 TPITHREADS (METRIC). (35).3 TO 14 TPMMTHREAD DIAL. YESHARDENED REPLACEABLE ...more
19" x 80" Reed-Prentice, engine lathe, 18" 4-jaw chuck, 1.5" hole, 7.5 HP, L1, 1943
MD Equipment Services LLC | Crooked River, OR
Category: Engine Lathes
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Reed-Prentice
Year: 1943
Engine Lathe, Manufacturer: Reed Prentice, Date of Manufacture: August 1943, Serial No.: 32180, Electrics: 220 Volt, 3 Phase, 60 Cycle, Power: 7-1/2 HP Spindle Motor (owner is confirming this spec) / Motor RPM: 3460, s and :, …Swing Over Ways: 18.75”, …Bed Length: 108”, …Distance ...more
19" x 80" Rockford, engine lathe, steady rest, 3 & 4-Jaw chucks, extra jaws, 1-3/4" spindle bore,
MachineCo | Montreal, QC
Category: Engine Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Rockford
Capacity: 19″ swing x 80″ between centers, Spindle Bore: 1-3/4″, Hardened bed, Includes:, 3 Jaw chuck, extra jaws, 4 jaw chuck Taper attachment, 3-pt. steady-rest Driver plate, 220V., Capacity: 19″ swing x 80″ between centers, Spindle Bore: 1-3/4″, Hardened bed, Includes:, 3 Jaw ...more
JUST ADDED!
19"/27" x 80" Summit #19-4, manual engine lathe, 16" 4-jaw chuck, 12" 3-jaw chuck, 4-1/8" bore, 22-1500 RPM, D1-8 Camlock nose, L2 spindle taper, Steady Rest
MD Equipment Services LLC | Crooked River, OR
Category: Engine Lathes
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Summit
Model: 19-4
Manual Engine Lathe, OEM: Summit Machine Tool Manufacturing Corp., Model: 19-4", Electrics: 220 Volt, 60 Cycle, 3 Phase, Main Motor: 7.5 / 10 HP, s and :,.Swings:,.Over Bed: 19",.Over X-Slide: 10-3/4",.Gap: 27",.Gap Length: 15-3/8",.Spindle :,.Spindle Bore: 4-1/8",.Speeds (12): 22 - 1500 ...more
19" x 80" Summit #19-4, Engine Lathe, Mitutoyo digital read out, tailstock, steady rest, 1991, 19-4x80
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Summit
Model: 19-4
Year: 1991
Make: Summit, Model: 19-4x80, Year: 1991, Machine Location: Idaho, Swing Over Bed: 19″, Swing Over Cross Slide: 10-3/4″, Swing Over Gap: 27″, Gap Length: 15-3/8, Width of the Bed on Slidways: 13-3/8″, Distance Between Centers: 80″, Spindle Speeds: 22-1500 RPM, Feeds:.0007″ ...more
19" x 80" Summit Lathe, 4 Jaw, follow rest, steady rest, taper attach, 7.5 HP
Roskelley Machinery Corp. | Salt Lake City, UT
Category: Engine Lathes
Seller: Roskelley Machinery Corp.
Location: Salt Lake City, UT
Mfr: Summit
Model: 19-4 X 80
SUMMIT 19-4 X 80 LATHE SERIAL #3254301, Swing Over Bed: 19″, Swing Over Cross Slide: 10.75″, Swing Over Gap: 27″, Gap Length: 15-3/8″, Width of the Bed on Slidways: 13-3/8″, Main Spindle Bore: 4-1/8″, Main Spindle Taper: D1-8 Camlock, Morse Taper: No. 5, Tail Stock Sleeve Diameter: ...more
19" x 82" LeBlond Makino #Regal-19, servo shift engine lathe, 12" SOCS, 12" 3-jaw chuck, 3" spindle bore, Newall digital read out, inch/metric, Newall digital read out, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: REGAL-19
Spec Sheet:, 19" x 82" LeBlond Makino Engine Lathe, Servo Shift, 3" Spindle Bore, Newall DRO, Inch & Metric Threading, 12" 3 Jaw Chuck, Tailstock, 20" Swing, 82" Between Centers, 12" Over the Cross Slide, 230V 3 Phase Power.
19" x 96" Cincinnati #19, Engine Lathe, 19" Swing, Taper Attatchment, 1970
Revelation Machinery | Chicago, IL
Category: Engine Lathes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: 19
Year: 1970
Make: Cincinnati, Model: 19, Year: 1970, Machine Location: Maryland, Swing 19”, Bed Length 96”, Taper Attachment, Digital Readout, Steady Rests.
19" x 96" Lodge & Shipley #Powerturn, Engine Lathe, 4-Jaw 16" chk, 20 HP, steady rest, 1160 RPM, under power
Deal Makers Machinery | Thousand Oaks, CA
Category: Engine Lathes
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Lodge & Shipley
Model: POWERTURN
LODGE & SHIPLEY POWERTURN ENGINE LATHE Price: $8,950 Subcategory: Engine Lathes Swing: 19" Centers: 96" Year of Manufacture: 1971 Manufacturer: Lodge & Shipley Model: POWERTURN Condition: Used, 1160 RPM, 4 JAW 16" CHUCK, 20 HP, STEADY REST, UNDER POWER & RUNNING.
19" x 96" Monarch #612, Engine Lathe, 16" swing over cross slide, 10 Hp, 12-1750 Rpm, 2" bore, inch threading, 1967
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Buffalo, NY
Mfr: Monarch
Model: 612
Year: 1967
THIS IS A 1967 MONARCH 612 19'' X 96'' ENGINE LATHE MANUFACTURED BY MONARCH, MODEL 612, AND BUILT IN FEBRUARY 1967. IT OPERATES ON 440V 3PH 60HZ POWER. KEY INCLUDE A 28'' SWING AND A 96'' CENTER SPAN. THE SPINDLE S A THROUGH-HOLE OF APPROXIMATELY 2.06'' AND A D1-6 CAMLOCK NOSE ...more
19" x 102" LeBlond #19-Regal, engine lathe, 10" 3-jaw chuck, 2.75" bore, 10 HP, 1500 RPM, 3 Steady Rest, follow rests, quick chane toolpost w/ holders, tailstock
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
, Used 19" x 102" LeBlond Regal Engine Lathe with 2 steady and follow rests, 10 hp motor, and 2.75" spindle bore. Includes a quick-change toolpost with holders, tailstock, and more. Ideal for precision machining tasks., Spec Sheet:, 19" x 102" LeBlond Regal Engine Lathe, SERIAL: 8E2304, MODEL: 19" REGAL, SWING OVER ...more
19" x 102" Leblond #19-Regal, Engine Lathe, 12-1/4" swing over cross slide, 10 HP, 1000 RPM, 3 Jaw 10" chuck Follow Rest, Steady Rest, holders & tooling, tailstock
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
THIS LEBLOND 19" REGAL ENGINE LATHE S A 19-INCH SWING OVER WAYS AND A 13-INCH SWING OVER THE CROSS SLIDE, WITH A DISTANCE BETWEEN CENTERS OF 102 INCHES. IT IS A 10 HORSEPOWER MOTOR AND OPERATES ON 460V, 3 PHASE POWER. THE SPINDLE SPEEDS RANGE FROM 25 TO 1000 RPM, AND THE SPINDLE HOLE DIAMETER IS 2 3/4 INCHES. IT ...more
19" x 102" LeBlond #Makino-Servo-Shift, 10 HP, 1600 RPM, 6-jaw 12" chuck, inch/metric, 1990, TK-21101
Action Machinery Co Inc | Emmaus, PA
Category: Engine Lathes
Seller: Action Machinery Co Inc
Location: Emmaus, PA
Mfr: Leblond
Model: MAKINO-SERVO-SHIFT
CAPACITY, SWING OVER BED AND CARRIAGE WINGS: 19-1/4", SWING OVER CROSS SLIDE: 12-1/4", DISTANCE BETWEEN CENTERS: 102", HEADSTOCK, SPINDLE SPEEDS, NUMBER: 12, SPINDLE SPEED RANGE: 40 TO 1,600 RPM, SPINDLE NOSE: D1-8, SPINDLE HOLE STRAIGHT: 3-1/16", BED, LENGTH, STANDARD: 12’3", WIDTH: ...more
19" x 102" LeBlond #Regal, engine lathe, 13" swing over cross slide, 4-jaw 15" chuck, 10 HP, #74350
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 2012
SERIAL. 8E2737, MODEL. REGAL, SWING OVER WAYS. 19", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 102", SPINDLE SPEEDS. 25 TO 1000 RPM, SPINDLE HOLE. 1-1/2", STANDARD THREAD. (48) 2 TO 112 TPI, STANDARD FEEDS. (48).0018 TO.104 IPR, CHUCK. 15" 4 JAW, TAPER ATTACHMENT. YES, TREAD DIAL. YES, STEADY REST 3 POINT ...more
19" x 120" LeBlond #6E-Regal, engine lathe, 4-jaw chuck, 25-1000 RPM, 1-13/16" hole, thread dial, 3 point Steady Rest
Yoder Brothers Machinery | Toledo, OH
Category: Engine Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Leblond
Model: 6E-REGAL
SERIAL. 6E 911 MODEL. REGAL SWING OVER BED. 19" SWING OVER CROSS SLIDE. 12-1/2" DISTANCE BETWEEN CENTERS. 120" SPINDLE SPEEDS. 25 TO 1000 RPM HOLE THROUGH SPINDLE. 1-13/16" THREADS. 2 TO 112 TPI FEEDS.0018 TO.104 IPR THREAD DIAL. YES CHUCK. 4 JAW, FACE PLATE. YES STEADY REST. 3 POINT MOTOR. 7-1/2 HORSEPOWER.
19" x 126" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 15 HP, coolant, 1973, #13607
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1973
SERIAL. E2336, MODEL. REGAL, NEW IN. 1973, ACTUAL SWING OVER BED. 19-1/4", DISTANCE BETWEEN CENTERS. 126", SWING OVER CROSS SLIDE. 12-1/4", SPINDLE SPEEDS. (12) 40-1600 RPM, FEEDS. (48).0018-.104 IPR, THREADS. (48) 2-112 TPI, HOLE THRU SPINDLE. 1-3/4", STEADY REST. 6" 3 POINT, CHIP PANS. YES, HARDENED REPLACEABLE BED ...more
19" x 144" LeBlond Makino #15E-Regal, engine lathe, 12" 3-jaw chuck, 3" hole, 40-1600 RPM, inch/metric, 10" Steady Rest, taper attachment
Yoder Brothers Machinery | Toledo, OH
Category: Engine Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Leblond
Model: 15E-REGAL
SERIAL. 15E-547, MODEL. REGAL MAKINO, SWING. 19", CENTERS. 144", SPEEDS. 40 TO 1600 RPM, SPINDLE HOLE. 3", CHUCK. 12" 3 JAW, FEEDS & THREADING. INCH & METRIC, STEADY REST. 10", TAPER ATTACHEMENT.
19" x 150" LeBlond Makino #Regal-15C, servo-shift engine lathe, 10 HP, 12 1/4" swing over cross slide, inch/metric, 3" hole, digital read out, taper attachment, chuck & Steady Rest, 1992
Wigglesworth Machinery Co | Marblehead, MA
Category: Engine Lathes
Seller: Wigglesworth Machinery Co
Location: Marblehead, MA
Mfr: Leblond
Model: REGAL-15C
Year: 1992
19"x150" LeBlond Makino "Regal" Servo-Shift Engine Lathe, 10 HP, 12 1/4" over cross slide, Inch/Metric, 3" Hole, Digital Read Out, Taper Attachment, Chuck and Steadies., 1992 LE BLOND MAKINO REGAL SERVO SHIFT 15C, Swing. 19.25", Centers. 150", Spindle Bore. 3.1", Power. 10 hp, RPM. 0 RPM, Swing Over Cross Slide. ...more
19" x 150" LeBlond-Makino #19-Regal, servo-shift engine lathe, 12" 3-jaw chuck, 3-1/16" hole, D1-8, Newall Topaz 2-Axis digital read out, inch/metric, 2 roller type Steady Rest, 1992
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: 19-REGAL
Year: 1992
19" x 150" LEBLOND MAKINO SERVO-SHIFT ENGINE LATHEMODEL: 19" REGAL, S/N: 15E-430, NEW: 1992 :SWING OVER BED. 19-1/4"SWING OVER CROSS SLIDE. 12-1/4"DISTANCE BETWEEN CENTERS. 150"SPINDLE NOSE. D1-8" CAMLOCKHOLE THRU SPINDLE.″-1/16"WIDTH OF BED. 14-3/8"SPINDLE SPEED ...more
19-1/4" x 102" LeBlond #19E7, engine lathe, 12-1/4" swing over cross slide, 3-jaw chuck,taper attach, #14187C
Timco Inc | Columbia, TN
Category: Engine Lathes
Seller: Timco Inc
Location: Columbia, TN
Mfr: Leblond
Model: 19E7
Leblond 19-1/4 x 102 Engine Lathe, Mdl# 19E&, S/N# 8E-2543, Headstock. Geared Head, Swing Over Bed. 19, Swing Over Cross Slide. 12-1/4, Swing in Gap. No Gap, Dist Between Centers. 102, Max Turning Length. 102, Spindle Nose. L1, Spindle Hole. 1-3/4, Bed Width. 11-9/16, Spindle Speeds (12). 25 - 1000 RPM, Threading. ...more
19-1/2" x 78" ENCO #11.1-3940 engine lathe, 12" 6-jaw chuck, 3-1/8" hole, 4-way tool post, Accurite 2-Axis digital read out, thread dial
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Enco
Model: 11.1-3940
SERIAL. 000857, MODEL. 111-3940, YEAR NEW. 6/2000, SWING OVER WAYS. 19.685", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS.78.74", SWING IN GAP. ", LENGTH OF GAP. 12-1/4", SPINDLE SPEEDS. 24 TO 1600 RPM, THREADS ENGLISH. TPI, THREADS METRIC. MMPR, DIAMETER PITCH., FEEDS. ", DIAMETER OF SPINDLE HOLE. 3-1/8", 6 ...more
19-1/2" x 84" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, 4-jaw 16" chuck, 10 HP, #69092
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1985
SERIAL. 8E2811, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 84", SPINDLE SPEEDS. (12) 25 TO 1000 RPM, FEEDS. (48).002 TO.108 IPR, THREADS. (48) 2 TO 112 TPI, DIAMETER OF SPINDLE HOLE. 1-49/64", TAPER ATTACHMENT. YES, 4-JAW CHUCK. 16", HARDEN REPLACEABLE WAYS. YES ...more
19-1/2" x 96" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, inch/metric, 3-jaw 12" chuck, #73117
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 10E-148, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 96", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, SPINDLE TYPE. L, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 1-3/4", CHUCK. 12" 3 ...more
19.69" Strojtos Lipnik Lathe, 9.84" swing over rest, 16.54" bed width, 2.2" spindle bore
SMF & Machine Tools Inc | Little Rock, AR
Category: Engine Lathes
Seller: SMF & Machine Tools Inc
Location: Little Rock, AR
Mfr: Strojtos Lipnik
Year: 1998
Swing over Bed 19.69'' Swing over rest 9.84'' Bed Width 16.54'' Spindle Bore 2.2'' Spindle Taper Morse 6.
20" x 40" Kingston #HL-1000, lathe frame, new, Taiwan, ready for retrofit, bed, headstock hi / lo, saddle, tailstock
Yancey Machine Tool Co | Portland, OR
Category: Engine Lathes
Seller: Yancey Machine Tool Co
Location: Portland, OR
Mfr: Kingston
Model: HL-1000
20" x 40" Nardini #SZ2040T, engine lathe, 12-1/2" swing over cross slide, 3-1/8" hole thru spindle, inch/metric threads, 3-jaw chuck, 2-Axos digital read out, 12.5 HP
iGAM | Detroit, MI
Category: Engine Lathes
Seller: iGAM
Location: Detroit, MI
Mfr: Nardini
Model: SZ2040T
This listing is for a Nardini #SZ2040T Engine Lathe., Manufacturer: Nardini, Serial: D3JDR130, Model: SZ-2040T, Swing Over Bed: 20", Swing in the Gap: 27-1/2", Swing Over Cross Slide: 12-1/2", Distance Between Centers: 40", Spindle Speeds: (18) 19 to 1500 RPM, Hole Through Spindle: 3-1/8", Threads, Inch: (64) 2-3/4 to ...more
JUST ADDED!
20" x 40" Victor/Taichung Machinery #400X1000, Lathe, w/Tail Stock & Tool Post, 10" 3-Jaw Chuck, 2" Bore, 7.5 Amps
HGR24 | Euclid, OH
Category: Engine Lathes
Seller: HGR24
Location: Euclid, OH
Mfr: Victor/taichung Machinery
Model: 400X1000
Inventory No. 0326-124-0002 Manufacturer Victor / Taichung Machinery Model No. 400X1000 Name Lathe Arrival Date 04-03-2026 Dimensions L x W x H (inches) 84 x 40 x 59 Capacity 20" X 40" Weight (lb.) 3285 Category Machine Tools Condition Used Available Quantity 1 Serial No. 563442 Item Heidenhaln Controls, Tail Stock ...more
20" x 40" Howa Sangyo #1000, engine lathe, 3-jaw chuck, 2" bore, 60-1500 RPM, toolpost holder, coolant
Westway Machinery Ltd | Mississauga, ON
Category: Engine Lathes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Model: 1000
, TOOLPOST HOLDERCOOLANT SYSTEMDUAL DIALS, ENGLISH–METRIC 3 JAW CHUCK, MODEL: 1000, SERIAL NO.: 10427, SWING OVER BED: 20”, SWING OVER CROSS SLIDE: 9.5”, DISTANCE BETWEEN CENTRES: 40”, SPINDLE BORE: 2”, SPINDLE SPEEDS: 60-1,500 RPM, WEIGHT: 5,000 LBS, DIMENSIONS (LxWxH): 87” x ...more
20" x 40" Howa Sangyo #1000, engine lathe, 3-jaw chuck, 2" bore, 60-1500 RPM, toolpost holder, coolant
Westway Machinery Ltd | Mississauga, ON
Category: Engine Lathes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Model: 1000
, TOOLPOST HOLDERCOOLANT SYSTEMDUAL DIALS, ENGLISH–METRIC 3 JAW CHUCK, MODEL: 1000, SERIAL NO.: 10441, SWING OVER BED: 20”, SWING OVER CROSS SLIDE: 9.5”, DISTANCE BETWEEN CENTRES: 40”, SPINDLE BORE: 2”, SPINDLE SPEEDS: 60-1,500 RPM, WEIGHT: 5,000 LBS, DIMENSIONS (LxWxH): 90” x ...more
20" x 54" LeBlond #19-Regal, servo-shift eng" e lathe, 12" 3-jaw Bison chuck, 3" bore, 40-1600 RPM, 7.5 HP, taper attachment, tailstock, Dorian toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Leblond
Model: 19-REGAL
, LEBLOND 19" x 54" Regal Servo Shift Lathe, used, s a 19" swing, 54" centers, 1.5" spindle bore, 5 hp, and 1500 RPM. Includes taper attachment, tailstock, Dorian toolpost, and 12" 3-jaw Bison chuck. Ideal for precise machining tasks., Spec Sheet:, 20" x 54" LeBlond Regal Servo Shift Engine Lathe w/Taper, Swing Over ...more
20" x 54" LeBlond #HeavyDuty, 13" SOCS, 3-jaw 18" chk, 2" hole, taper, 10 HP, #71579
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: HEAVYDUTY
SERIAL. 2NB708, MODEL. HEAVY DUTY, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 13", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 14 TO 1800 RPM, FEEDS. (48).0011 TO.675 IPR, THREADS (INCH). (48) 2 TO 120 TPI, DIAMETER OF SPINDLE HOLE. 2", 3 JAW CHUCK. 18", TAPER ATTACHMENT. YES, THREAD DIAL. YES, HARD WAYS. ...more
20" x 54" Lodge & Shipley #2013, ' Answer AVS' Lathe, 13.5" Cross Slide, D1-6 Camlock, 25-1500 RPM variable, 15 HP
Norman Machine Tool Ltd | Baltimore, MD
Category: Engine Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Lodge & Shipley
Model: 2013
Lodge & Shipley 20″ x 54″ ‘Answer AVS’ Lathe, 2013, Inventory # 9640, Model: 2013, S/N: 46529, Capacity:, Swing Over Bed: 20 1/2″, Swing Over Cross Slide: 13 1/2″, Distance Between Centers: 54″, Headstock:, Spindle Nose: D1-6 Camlock, Hole Thru Spindle: 2″, Spindle ...more
20" x 54" Monarch #610, Engine Lathe, 16" swing over cross slide, 10 Hp, 1500 Rpm, 2-1/4" bore, 12" chuck, 1978
Aucto | San Francisco, CA
Category: Engine Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Monarch
Model: 610
Year: 1978
THIS MONARCH MODEL 610 IS AN ENGINE LATHE WITH A CAPACITY DEFINED BY A 20-INCH SWING AND 54-INCH DISTANCE BETWEEN CENTERS. THE MACHINE IS DRIVEN BY A 10 HP, 240V, 3-PHASE MOTOR, ALLOWING FOR A MAXIMUM ROTATIONAL SPEED OF 1,500 RPM. ITS SPINDLE S A 2.25-INCH BORE AND A D1-6 MOUNT, WHICH IS FITTED WITH A 12-INCH 3-JAW ...more
20" x 54" Monarch #610, engine lathe, 12" 3-jaw chuck, D1-6, 2.25" bore, quick change toolpost
Machinery Central | Louisville, KY
Category: Engine Lathes
Seller: Machinery Central
Location: Louisville, KY
Mfr: Monarch
Model: 610
, Used 20" x 54" Monarch Model 610 Engine Lathe, perfect for precision machining tasks. s include 20" swing, 54" centers, and 2.25" spindle bore. a 12" 3-jaw chuck and quick-change toolpost, powered by 10 HP for efficient performance., Spec Sheet:, 20" x 54" Monarch Model 610 Engine Lathe, Model 610, S/n 47050, 12" 3 ...more
20" x 54" Monarch #610, engine lathe, 13" swing over cross slide, 3-jaw 15" chuck, 2" spindle hole diameter, AcuRite 2-Axis digital read out
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Monarch
Model: 610
Year: 1978
SERIAL. 46406, MODEL. 610, SWING OVER WAYS. 20", DISTANCE BETWEEN CENTER. 54", SWING OVER CROSS SLIDE. 13", SPINDLE SPEEDS. (24) 12 TO 1500 RPM, FEEDS. (66).0013 TO.0821 IPR, THREADS. (66) 2 TO 120 TPI, DIAMETER OF SPINDLE HOLE. 2", SWIVEL COMPOUND. YES, CHUCK. 15" 3 JAW, THREAD DIAL. YES, TRAVEL DIAL. YES, HARDEN ...more
20" -26" x 57" -80" Kent USA #Ml-2060, 2280, HW-26, MD-55, HW-30, Manual Precision Lathe, new, (7 available)
Blumberg Machinery Co | Bannockburn, IL
Category: Engine Lathes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: ML-2060
20" x 44" KENT USA ML-2060VT MANUAL PRECISION LATHE - NEWPRODUCT HIGHLIGHTS7.5 HP Spindle Motor, 12-Speeds3.125 Spindle Through HoleSolid Full Length Casting Base with Front Loading Chip Tray for Easier CleaningAdjustable Over-load Feed ClutchesQuick Reversal Feed from ApronFull-length Safety Foot BrakeSpindle Jog ...more
20"/24" x 57" Milltronics #HML2060, engine lathe, 12" gap length, 3" hole, 30-2200 RPM, thread dial, taper attachment, 6" Steady Rest
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Milltronics
Model: HML2060
SERIAL. 2060305346, MODEL.HML2060, SWING. 20", CENTERS. 57", SWING OVER CROSS. 14", SWINN IN GAP. 24", GAP LENGTH. 12", DIAMETER OF SPINDLE HOLE. 3", SPINDLE SPEEDS. 30 TO 2200 RPM, THREAD DIAL. YES, TAPER ATTACHMENT. YES, STEADY REST. 6", MOTOR. 7.5 HORSEPOWER.
