23 Results
10" x 30" South Bend #CL-187RB, engine lathe, 1-3/8" bore, D1-4 camlock, 3 & 4-jaw chucks, taper att., QC toolpost, 1 HP, 1985
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: South Bend
Model: CL-187RB
Year: 1985
10" x″3" SOUTHBEND PRECISION LATHEMODEL: CL187RB, S/N: 22383R, NEW: 1985 :SWING OVER BED… SADDLE WINGS. 10-1/8"SWING OVER CROSS SLIDE. 5-7/8"DISTANCE BETWEEN CENTERS.″3"BED LENGTH. 54"HOLE THRU SPINDLE. 1-3/8"SPINDLE NOSE. D1-4" CAMLOCK SPINDLE SPEEDS: DIRECT ...more
12" x 34" South bend Lathe, 3-jaw 5" chuck, 65" bed length, quick change gearbox
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: South Bend
65" total bed length, 34" Center to center, 5" 3 Jaw chuck, 12" swing over bed, quick change gearbox for feed changes, 208 Volt 3 phase 4.7 amp, O.A. DIM. - 66" X 24" X 54", WEIGHT - 830 LBS., 208 VOLT 3 PHASE 4.7 AMP MOTOR.
14" x 40" Victor #1440B, engine lathe, inch/metric thread, 4-Jaw
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Victor
Model: 1440B
14"/20" x 40" VICTOR GAP BED ENGINE LATHEMODEL: 1440B, S/N: 220198 :SWING OVER BEDWAYS. 14"SWING IN REMOVEABLE GAP. 20"SWING OVER CROSS SLIDE. 8-5/8"HOLE THRU SPINDLE. 1-1/2"DISTANCE BETWEEN CENTERS. 40"SPINDLE NOSE. D1-4" CAMLOCKSPINDLE SPEED RANGE (12). 40 - 2020 ...more
15" x 32" Mannaioni #Man-Au-Cycle threading lathe, 3-jaw 8" chuck, tailstock, lead screw
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mannaioni
Model: MAN-AU-CYCLE
15" X 32" MANNAIONI MAN-AU-CYCLE THREADING LATHE, Mannaioni 15" x 32" (est.) Man-Au-Cycle Threading Lathe, S/N: N/A, 4-1/2" (est.) Hole thru spindle, 8" 3-Jaw Chuck, Cross-Slide w/Tool Post, Tailstock, Lead Screw, Hydraulic Thread Tracer.
15" x 40" Sheldon #R-15, lathe, 2-1/4" bore, 1250 RPM, AcuRite digital read out, tailstock, Buck Adjust-Tru chuck,
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Sheldon
Model: R-15
Product, Sheldon Model R-15 Lathe, Swing Over Ways- 15″, Distance Between Centers- 40″, Spindle Hole- 2 5/16″”, Spindle- D1-6 Camlock, Tailstock Taper- MT#4, Speeds- To 1250 rpm, -Acu-Rite Digital Readout, -Aloris Toolpost & Holders, -Live Center, -Tailstock Chuck, -Taper Attachment, -Buck ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
JUST ADDED!
15" x 48" Clausing Colchester, engine lathe, 24" swing in gap, 2.12" bore, D1-6 nose, 16 speeds, 25-2000 RPM, 7.5 HP, 4-jaw chuck, 5C closer, 1979
Heavy Wall Consulting | Long Beach, CA
Category: Engine Lathes
Seller: Heavy Wall Consulting
Location: Windsor Township, NJ
Mfr: Clausing Colchester
Year: 1979
Clausing-Colchester 15" Engine Lathe | 1979 | 7.5 HP | 16-Speed | With Accessories, MACHINE OVERVIEW, For sale is a Clausing-Colchester 15" geared-head engine lathe manufactured in 1979 and in good working condition. Clausing-Colchester lathes are legendary in the machining world known for precision, durability, and ...more
15" x 50" Clausing Colchester lathe, taper, in/mm threading
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Clausing
16"/23" x 30" Microweily #TY-1630S, gap bed engine lathe, 2.04" bore, inch/metric, D1-6, Heidenhain 2-Axis digital read out, 3-jaw, Aloris CA quick change tool post, steady, 5 HP, 2004
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Microweily
Model: TY-1630S
Year: 2004
16"/23" X″0" MICROWEILY ENGINE LATHEMODEL: TY-1630S, S/N: 49304-005, NEW: 2004 :SWING OVER BED. 16.14"SWING OVER CROSS SLIDE. 9.4"SWING IN GAP. 23.42"LENGTH OF GAP IN FRONT OF FACE PLATE. 6.1"DISTANCE BETWEEN CENTERS.″0"WIDTH OF BED. 11.81"SPINDLE BORE. ...more
JUST ADDED!
19" x 78" LeBlond Makino #Regal, engine lathe, 12-1/4" swing over cross slide, 3-1/16" bore, 25-1000 RPM, 10 HP, taper attachment, digital read out, 1995
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Leblond Makino
Model: REGAL
Year: 1995
Product, LEBLOND MAKINO 19″X78″ LATHEMODEL: 19″ REGAL, S/N: 14E-413, NEW: 1995, SWING OVER BED ………………. 19-1/4″, SWING OVER CROSS SLIDE ………… 12-1/4″, DISTANCE BETWEEN CENTERS ………. 78″, WIDTH OF BED ...more
20" x 156" Leblond, Engine Lathe with Taper attachment, 1-3/4" spindle hole, Steel Steady Rest
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Leblond
Product Leblond 16 Heavy Duty Lathe 20″ x 156″, Actual Swing 20 1/2″, Distance Between Centers 156″, Spindle Hole 1 3/4″, Taper Attachment, Steel Steady Rest with Roller Jaws, Toolpost & Holders, There is no compound on the carriage- the toolpost mounts directly to the cross-slide..
22"/32" x 80" Harrison #M550-GH, gap bed engine lathe, D1-11, inch/metric, 12" 3-jaw chuck, 15.5" 4-jaw chuck, 2-1/2" hole, steady & follow rests, 12-1/2 HP, 1996
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Harrison
Model: M550-GH
Year: 1996
22"/32" x 80" HARRISON GAP BED ENGINE LATHEMODEL: M550 GH,… S/N: 5M0064,… MFG: 1996 :SWING OVER BED. 21.8"SWING IN REMOVEABLE GAP.″2.7"SWING OVER CROSS SLIDE. 14.5"DISTANCE BETWEEN CENTERS. 80"WIDTH OF BED. 15.7"HOLE THRU SPINDLE.″.5"SPINDLE NOSE ...more
JUST ADDED!
25" x 78" LeBlond Makino #Regal, engine lathe, 17-1/4" swing over cross slide, 3-1/16" bore, 40-1600 RPM, 10 HP, taper attachment, Steady Rest
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Leblond Makino
Model: REGAL
Product, LEBLOND-MAKINO ENGINE LATHE 25″ x 78″ MODEL: REGAL, S/N: 14E, SWING OVER BED ………………. 25-1/4″, SWING OVER CROSS SLIDE ………… 17-1/4″, DISTANCE BETWEEN CENTERS ………. 78″, SPINDLE NOSE ...more
25" x 120" Ikegai, Lathe w/Taper, 3 and 4 jaw chucks, tailstock chuck, live center, steady rests
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Product, IKEGAI MODEL DA-25 LATHESWING OVER WAYS- 25″, SWING IN GAP- 33″, DISTANCE BETWEEN CENTERS- 120″, THREADING- IN/MM, SPINDLE SPEEDS- 15-1200 RPM, TAILSTOCK TAPER- MT#5, WIRED- 220/440V 3PH, MAIN MOTOR- 11 KW (APPROXIMATELY 15 HP), -TAPER ATTACHMENT, -BUCK 15″ ADJUST-TRU 3 JAW CHUCK, -(3) ...more
26" x 120" Standard Modern #26/120, Lathe, 18" swing over cross slide, 3" hole, 17-1000 RPM, Steady Rest
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Modern
Model: 26/120
Product, STANDARD MODERN MODEL 26/120 LATHESWING OVER WAYS- 26″, SWING OVER CROSS-SLIDE- 18″, SPINDLE TAPER- D1-8, SPINDLE HOLE- 3.06″, DISTANCE BETWEEN CENTERS- 120″, TAILSTOCK TAPER- MT#5, THREADING- INCH & METRIC, SPINDLE SPEEDS- (18) – 17-1000 RPM, -3 & 4 JAW CHUCKS ...more
30" x 60" Lion 0CU/CU802-1500, engine lathe, 4" Hole Taper, Gap, Steady Rest, Inch/Metric
Machinery Values Inc | Harrison, NJ
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Lion
30"/38" X 60" LION GAP BED ENGINE LATHEMODEL: CU802,… S/N: 1650,… NEW: 2014 : SWING OVER BED.″0"SWING OVER CROSS SLIDE. 20-1/4"SWING IN GAP.″8-3/4"DISTANCE BETWEEN CENTERS. 60"WIDTH OF BED. 19"SPINDLE NOSE. D1-11" CAMLOCKSPINDLE BORE. ...more
40" x 77" Lodge & Shipley #25/35, Heavy Duty lathe, 28" 4-jaw chuck
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Lodge & Shipley
Model: 25/35
LODGE & SHIPLEY 40" x 77" HEAVY DUTY ENGINE LATHE, MODEL# 25"/35", SWING OVER BED: 40", SWING OVER CROSS SLIDE: 30", DISTANCE BETWEEN CENTERS: 77", SPINDLE SPEEDS (25): 9 - 507 RPM, SPINDLE HOLE BORE: 2-1/2", MAIN MOTOR: 30 HP, THEADING: INCH ONLY, ELECTRICS: 220/440V, 3-PHASE, WEIGHT: 20,000 LBS, DIMENSIONS ...more
48" x 108" Monarch Heavy Duty Dyna-Shift, Newall 2-Axis Digital Readout
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Monarch
Product, MONARCH HEAVY DUTY DYNA-SHIFT LATHE 48″ X 108″, Serial # 42218 Model: Series 90, Catalogue Size 2502, New 1957, Swing Over Bed Ways: 48″, Swing Over Cross Slide: 36″, Spindle Hole Size: 4-1/16″, Spindle Type: D1-11, Spindle Taper: 7 MT, (36) Spindle Speeds: 6 to 750 RPM, (48) ...more
Featured
63" x 197" Poreba #TCG 160, Engine Lathe, 4-jaw chuck 50 ton capacity 100 HP, Remanufactured
Hanza International | Moorestown, NJ
Category: Engine Lathes
Seller: Hanza International
Location: Moorestown, NJ
Mfr: Poreba
Model: TCG 160
Year: 2026
Britian Lathe
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Britian
O.A. DIM. - 38" X 23" X 54", WEIGHT - 640 LBS, SE.
Clausing lathe & drill press
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Clausing
LeBlond lathe
Wenco Machinery Corp | Ringwood, NJ
Category: Engine Lathes
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Leblond
Supermax #1667 Lathe
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Supermax
Model: 1667
SUPERMAX Mdl# 1667 LATHE.
Yam #700 Engine Lathe
National Machinery Exchange | Newark, NJ
Category: Engine Lathes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Yam
Model: 700
