Mori Seiki&nbsp;CNC Lathes and Turning Centers

Seller: Machnet

Location: Santa Monica, CA

Mfr: Mori Seiki

Model: SL-25A/1000

Year: 1988

Mori Seiki SL-25A/1000 CNC Turning Center, Mori Seiki SL-25A/1000 CNC Turning Center, New: 1988, Swing Over Bed: 20.5", Swing Over Cross Slide: 13.8", Max Turning Diameter: 10.2", Max Turning Length: 40", Spindle Bore: 3.1", Spindle Speed: 35 to 3500 RPM, Spnidle Nose/Taper: A2-6, Rapid Traverse Rate: 472 (X), 590 (Z) ...more

Mori Seiki #SL-25B/500, CNC lathe, 20.4" swing, 10" chuck, 2.7" bar, 25 HP, 3500 RPM

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: SL-25B/500

MORI SEIKI SL-25B/500, Swing. 20.47", Machining Length. 24.61", Max. Turning Diameter. 10.24", Chuck Size. 10", Bar Capacity. 2.75", Power. 25 hp, Max RPM. 3,500 RPM.

3 Photos

Mori Seiki #SL-25SY, CNC turing machine, MF-D6 controls, 20.4" swing, 10" chuck, 2.6" bar, 1994

Blumberg Machinery Co | Bannockburn, IL

847-58... (Show) 847-580-6800

Seller: Blumberg Machinery Co

Location: Bannockburn, IL

Mfr: Mori Seiki

Model: SL-25SY

Year: 1994

MORI SEIKI SL-25SY CNC TURNING MACHINE WITH LIVE TOOLING, New 1994, Motor Driven with 20 HP, 3-Phase, 60 Cycle, AC Motor and Controls, MF-D6 CNC Controls, Sub Spindle, Y - Axis, Large Quantity of Tooling and Live Tooling, Coolant, Chuck Size 10", Max. Swing 20.4", Max. Cutting Diameter 10.24", Main Spindle Bore 3.54" ...more

Mori Seiki #SL-65B, CNC lathe, 35" swing, 24" chuck, 4.7" bar, 32.2" diameter, 31.1" length, A2-11, 12 turret, Fanuc 0T, 1993

Champion Machinery Inc | Fort Mill, SC

803-54... (Show) 803-548-8000

Seller: Champion Machinery Inc

Location: Fort Mill, SC

Mfr: Mori Seiki

Model: SL-65B

Year: 1993

, Chuck Size 24", Max Diameter Bar Capacity 4.75", Max Swing Over Bed/Front Cover 35" / 27.6", Spindle Motor 50 / 40 HP, Spindle Speed 4 - 1010 RPM, Spindle Nose A2-11, Spindle Bore 6.6", Tools 12, Rapid Traverse Rates (X & Y / Z) 197 / 315 IPM, X-Axis Travel 17.1", Z-Axis Travel 33.9", Turret Index (Single Step / ...more

Featured

Mori Seiki #SL-65C, CNC turning center, 10.2" thru hole, MSC516 Control, SMW air chucks

Automated Controls Systems | Houston, TX

713-62... (Show) 713-628-6219

Seller: Automated Controls Systems

Location: Houston, TX

Mfr: Mori Seiki

Model: SL-65C

Year: 1997

Mori seiki SL-65C, 10.2" thru hole, SMW Air Chucks BB500-230-ES front and rear, MSC516 control, Fanuc 16T, Under power in our Houston Tx warehouse.

Get email updates for newly added CNC Lathes and Turning Centers

A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.

Mori Seiki #SL-75A, MSC-516(Fanuc 18T), 2-Axis, 4-jaw 21" chuck, 21" swing, 1010 RPM, tailstock, 1996

N & R Machine Sales | Navasota, TX

800-24... (Show) 800-245-3194

Seller: N & R Machine Sales

Location: Navasota, TX

Mfr: Mori Seiki

Model: SL-75A

Year: 1996

35.8" X 68.9" Mori Seiki CNC Lathe Ref.#L2150141, Model: SL 75A, Serial No. AH0621, New: 1996, Control MSC-516 (Fanuc 18T), Swing Over Ways-35.8", Swing Over Carriage-22.8", Travel Z Axis-60.2", Travel X Axis-15.8", Feeds X/Z-.001 To.500, Rapid Traverse Z Axis-8,000 IPM, Rapid Traverse X Axis-5,000 IPM, Center ...more

7 Photos Video

Mori Seiki #SL-75A, Fanuc, 35" swing, 68" centers, 1800 RPM, 12 station turret, Kitagawa 24" chuck, chip conveyor, coolant

HTR Global Inc. | Houston, TX

281-37... (Show) 281-376-8950

Seller: HTR Global Inc.

Location: Houston, TX

Mfr: Mori Seiki

Model: SL-75A

MORI SEIKI SL-75A CNC LATHE, Model SL-75A, CNC control Mori MF-T6/Fanuc, Swing over bed 35”, Swing over carriage 22”, Center distance 68”, Chuck B24” Kitagawa 3-jaw hydraulic, Max machining diameter 30”, Max longitudinal travel 61”, Max cross travel 15”, Spindle center height ...more

7 Photos

Mori Seiki #SL-150, CNC lathe, 24.4" swing, 1.3" bar, 24.8" machining length, 16.92" turning diameter, 1997

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: SL-150

Year: 1997

1997 MORI SEIKI SL-150, Swing. 24.41", Machining Length. 24.8", Max. Turning Diameter. 16.92", Bar Capacity. 1.3", Power. 15 hp, Max RPM. 8,000 RPM.

5 Photos

Mori Seiki #SL-200S/500, CNC lathe with sub spindle, 2-Axis, 26" swing, 8" chuck, 2.8" bar

Asset Exchange Corporation | Elk Grove Village, IL

773-86... (Show) 773-866-9600

Seller: Asset Exchange Corporation

Location: Elk Grove Village, IL

Mfr: Mori Seiki

Model: SL-200S/500

Overview, Type: Lathes CNC Manufacturer: SL200S/500 Model: SL200S/500 Stock #: 92184 Status: For Sale Serial #: 791 Country: United States, ImperialMetricsize 8" Chuck 8" Chuck Swing 26" 660.4 mm Machining Length 20" 508 mm # Axis 2 2 Chuck Size 8" 203.2 mm Bar Capacity 2.8" 71.12 mm ...more

5 Photos

Mori Seiki #SL-203MC, CNC lathe, 8" chuck, 2" bar, 24.3" centers, 12 turret, MSG-501, live tool, tailstock, tool presetter, 2000

Machnet | Santa Monica, CA

310-90... (Show) 310-909-2020

Seller: Machnet

Location: Santa Monica, CA

Mfr: Mori Seiki

Model: SL-203MC

Year: 2000

2000 Mori Seiki SL-203MC, Mori Seiki SL-203MC CNC Turning Center, New: 2000, Turning Diameter: 15.3", Center Distance: 24.3", Chuck Size: 8", Bar Capacity: 2.0", Turret Stations: 12, Spindle Speed: 4000 RPM, Spindle Motor: 15 HP, MSG-501 (Fanuc) CNC Control, Live Tooling, C-Axis Subspindle, Tailstock, Chip Pan and ...more

3 Photos

Mori Seiki #SL-204SMC, CNC lathe, live tooling, sub spindle, C-Axis, 2.5" bar, 2001

Relco Industries | Southampton, PA

215-35... (Show) 215-350-1307

Seller: Relco Industries

Location: Southampton, PA

Mfr: Mori Seiki

Model: SL-204SMC

Year: 2001

Mori Seiki SL-204 SMC CNC Lathe, 2001 – Live Tooling, Sub Spindle, C-axis, Stock#R794, Model SL-204 SMC, Serial#1330, Year 2001, Bar Capacity: 2.5″, Spindle Speed: 4,500 RPM, Spindle Motor: 15 HP, Spindle Bore: 2.9″, Sub Spindle Motor: 10 HP, Sub Spindle Speed: 6,000 RPM, X Axis Travel: 9.3″, Z ...more

Mori Seiki #SL-250B, CNC Lathe, 26.8" swing, 10" chuck, 2.9" bar, 15.3" turn diameter, 19.1" turn length, tailstock, 1997

Revelation Machinery | Chicago, IL

816-33... (Show) 816-330-2138

Seller: Revelation Machinery

Location: Chicago, IL

Mfr: Mori Seiki

Model: SL-250B

Year: 1997

Make: Mori Seiki, Model: SL-250B, Year: 1997, Machine Location: Tennessee, Bar Capacity: 2.9″, Chuck Size: 10″, Spindle Speed: 3,500 RPM, Spindle Motor: 20 HP, X Axis Travel: 6.3″, Z Axis Travel: 19.5″, Turret Tools: 10 Station, Max Turning Dia: 15.3″, Max Turning Length: 19.1″, Max ...more

Mori Seiki #SL-15, 17.7" swing, 25.4" centers, 6" chuck, 3-jaw, 2" bore, tailstock, Fanuc MFT6

Arlington Machinery | Lake Zurich, IL

847-95... (Show) 847-957-9731

Seller: Arlington Machinery

Location: Lake Zurich, IL

Mfr: Mori Seiki

Model: SL-15

Used Mori Seiki CNC Lathe, Model SL-15 Swing Over Bed: 17.7" Distance Between Centers: 25.4" X-Axis Travel: 5.3" Z-Axis Travel: 22" Spindle Nose: A2-5" Spindle Bore: 2.0" Spindle Speed: 60 - 6,000 RPM Spindle Motor:10 Hp Turret Type: 12 Position Turret Tailstock Quill Dia.Type: 3" / #4 MT : Mori Fanuc MFT6 CNC Control ...more

JUST ADDED!

Mori Seiki #SL-15, CNC lathe, 6.5" 3-jaw chuck, 1.5" bore, 6 position tool changer, Fanuc Series O-T control, tailstock, chip tray

HGR24 | Euclid, OH

216-48... (Show) 216-485-2976

Seller: HGR24

Location: Euclid, OH

Mfr: Mori Seiki

Model: SL-15

FOOT PEDAL, 6 POSITION TOOL CHANGER, FANUC SERIES O-T DIGITAL CONTROL PANEL, TAILSTOCK, 6.5” 3 JAW CHUCK, 1.5” BORE, LATHE (6840#) 65X103X73, CHIP TRAY 29X64X24, *CONTAINS 2 PIECES.

Mori Seiki #SL-150MC, CNC lathe, 24.4" swing, 16.9" turning diameter, 22.8" machining length, 6" chuck, 1.7" bar, 5000 RPM, 7.5 HP, MSC-518, 1996

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: SL-150MC

Year: 1996

1996 MORI SEIKI SL-150MC, Swing. 24.4", Machining Length. 22.8", Max. Turning Diameter. 16.9", X-Axis. 9.06", Z-Axis. 20.47", Chuck Size. 6", Bar Capacity. 1.77", Spindle Bore. 1.81 in, Power. 7.5 hp, Max RPM. 5,000 RPM, Tailstock. Yes, MSC-518 CNC Control, Chip Conveyor, Mist Collector.

4 Photos

Mori Seiki #SL-153, CNC lathe, 2000

Bay Area CNC Machinery | Walnut Creek, CA

925-25... (Show) 925-256-8111

Seller: Bay Area CNC Machinery

Location: Walnut Creek, CA

Mfr: Mori Seiki

Model: SL-153

Year: 2000

2000 Mori Seiki SL-153.

Mori Seiki #SL-204MC, 26.8" swing, 8" chuck, 2" bar, 19.5" centers, 15.3" diameter, MSG-805 Mitsubishi Control, 12 station turret, live tooling, 2003

KD Machinery | Scottsdale, AZ

480-56... (Show) 480-565-7310

Seller: KD Machinery

Location: Scottsdale, AZ

Mfr: Mori Seiki

Model: SL-204MC

Year: 2003

Used Mori Seiki SL-204MC (2003) CNC Lathe for Sale. This machine has an 8″ chuck, 2″ bar capacity, 26.8″ swing and 15.3″ turning diameter, with 19.5″ between centers and 19.5″ of Z-axis travel. Spindle speed is 4,500 RPM with milling speeds to 4,000 RPM, running a 12-station turret ...more

4 Photos

Mori Seiki #SL-204MC, CNC lathe, 26.8" swing, 15.3" diameter, 19.5" centers, 8" chuck, 2" bar, A2-6, 4500 RPM, 20 HP, 12 turret, live tool, C-Axis, 2004

Machine Tool Bids | Chicago, IL

312-60... (Show) 312-604-1850

Seller: Machine Tool Bids

Location: Chicago, IL

Mfr: Mori Seiki

Model: SL-204MC

Year: 2004

Maximize machining efficiency with the Mori Seiki SL-204MC (2004) CNC Lathe with live tooling. Perform turning, cross-drilling, and milling in a single setup for drive shafts, hydraulic spools, and aerospace fittings. Heavy-duty construction ensures precision for automotive and industrial parts. Request your price ...more

Mori Seiki #SL-204MC, CNC lathe, 26.8" swing, 15.3" dia., 19.5" centers, 8" chuck, 2" bar, 20 HP, 4500 RPM, 12 turret, live tooling, 2004

Machinery Marketing International | Chicago, IL

312-22... (Show) 312-226-4150

Seller: Machinery Marketing International

Location: Chicago, IL

Mfr: Mori Seiki

Model: SL-204MC

Year: 2004

Mori Seiki #SL-2500SY/650, CNC lathe, 34.3" swing, 19.2" turning diameter, 25.5" machining length, 10" chuck, 2.8" bar, 24.7 HP, 4000 RPM, live tool, sub spindle, low hours, 2002

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Mori Seiki

Model: SL-2500SY/650

Year: 2002

Used CNC Lathe. s 34.3" swing, 25.5" machining length, 10" chuck, 24.7 hp, 4,000 RPM. barfeeder, live tools, Y-axis milling, sub spindle, and more. Low hours., 2002 MORI SEIKI SL-2500SY/650, Swing. 34.3", Machining Length. 25.5", Chuck Size. 10", Bar Capacity. 2.8", Power. 24.7 hp, Max RPM. 4,000 RPM, Turning Dia. ...more

JUST ADDED!

Mori Seiki #SL-250B, CNC lathe, 2-Axis, MSC-500 Control, 26.7" swing, 22.6" centers, 10" chuck, 2.8" bar, 1998

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: SL-250B

Year: 1998

1998 MORI SEIKI SL-250B, Swing. 26.77", Machining Length. 19.09", Max. Turning Length. 19.09", Max. Turning Diameter. 11.792", Center Distance. 22.64", Distance Between Centers. 22.64", X-Axis. 9.25", Z-Axis. 20.47", Rapid Traverse X-Axis. 708.66 ipm, Rapid Traverse Z-Axis. 944.88 ipm, # Axis. 2, Chuck Size. 10", Bar ...more

Mori Seiki #SL-250BSMC, CNC lathe, 26.8" swing, collet chuck, 2.8" bar, 15.3" dia., A2-8, 12 turret, MSG 501, sub spindle, barfeed interface, 2001

Used CNC LLC | Huntley, IL

224-53... (Show) 224-537-0982

Seller: Used CNC LLC

Location: Huntley, IL

Mfr: Mori Seiki

Model: SL-250BSMC

Year: 2001

Swing Over Bed: 26.8", Turning Diameter, Shaft Diameter: 15.3", 9.7", Machining Length: 0, Distance Between Centers: 0, Distance Between Spindles: 29.6", Chuck Size 1, 2: COLLET, COLLET, Spindle Nose 1, 2: A2 -8, A2 - 5, Spindle Bore Diameter 1, 2: 3.2", Spindle Bar Capacity 1, 2: 2.8", Spindle Speeds 1, 2: 3500, 4000 ...more

Mori Seiki #SL-25B5, CNC lathe Turning Center, 10" 3-jaw chuck, Fanuc Control, Chip Conveyor

HGR24 | Euclid, OH

216-48... (Show) 216-485-2976

Seller: HGR24

Location: Euclid, OH

Mfr: Mori Seiki

Model: SL-25B5

FOOT PEDAL, FANUC CONTROL PANEL, 8511 HOURS, 10” 3-JAW CHUCK, 3 BORE, 31.0 KVA, CHIP CONVEYOR.

Mori Seiki #SL-400-BMC/2000, CNC turning center, 36.8" swing, 18" chuck, 3-jaw, 5.1" bar, 40" centers, 40 HP, 2400 RPM, 12 turret, A2-11, SMW Steady Rest, Royal Filtermist F1200 mist collector, 1999

Revelation Machinery | Chicago, IL

816-33... (Show) 816-330-2138

Seller: Revelation Machinery

Location: Chicago, IL

Mfr: Mori Seiki

Model: SL-400-BMC/2000

Year: 1999

Make: Mori Seiki, Model: SL-400 BMC/2000, Year: 1999, Machine Location: Illinois, Max Turning Diameter: 25.4″, Max Turning Length: 33.9″, Max Bar Capacity: 5.11″, Swing Over Bed: 36.8″, Distance Between Centers: 40.0″, X Axis Travel: 11.3″, Z Axis Travel: 36.0 ”, C Axis : ...more

8 Photos Video

Mori Seiki #SL-403B/2000, CNC turning center, MSX-500III w/MAPPS Control, 36.8" swing, 91.5" centers, 5" bar, 15" chuck, 2008

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: SL-403B/2000

Year: 2008

2008 MORI SEIKI SL-403B/2000, Swing. 36.8", Max. Turning Length. 84.9", Max. Turning Diameter. 24.4", Center Distance. 91.5", X-Axis. 13.5", Z-Axis. 86.4", Rapid Traverse X-Axis. 787.4 ipm, Rapid Traverse Z-Axis. 944.8 ipm, Chuck Size. 15", Bar Capacity. 5", Spindle Bore. 5.1 in, Spindle Nose. A2-11, Power. 40 hp, Max ...more

Mori Seiki #SL-403C/800, CNC lathe, 24.4" diameter x 34" L max, 43.5" centers, 40 HP, 1500 RPM, 29" swing over cross slide, 18" chuck, 6.5" bar, tailstock, Chip Conv., Fanuc 32.1B, 5509 hours, 2012

Clark Machinery Sales LLC | Hunt Valley, MD

410-25... (Show) 410-252-5494

Seller: Clark Machinery Sales LLC

Location: Hunt Valley, MD

Mfr: Mori Seiki

Model: SL-403C/800

Year: 2012

2012 MORI SEIKI SL-403C/800, SWING OVER CROSS SLIDE. 29.1", MAX CUTTING DIAMETER. 24.4", MAX CUTTING LENGTH. 34.1", DISTANCE BETWEEN CENTERS. 43.5", X-AXIS TRAVEL. 13.6", Z-AXIS TRAVEL. 39.2", CHUCK SIZE. 18", BAR CAPACITY. 6.5", SPINDLE BORE. 7.3", SPINDLE NOSE. A2-15, SPINDLE MOTOR. 50 hp, SPINDLE SPEED. 1,500 RPM ...more

Mori Seiki #SL-45A/1500, 26.3" swing, 15" chuck, 4" bar, 60.2" centers, 19.3" diameter, Fanuc CNC, 1989

KD Machinery | Scottsdale, AZ

480-56... (Show) 480-565-7310

Seller: KD Machinery

Location: Scottsdale, AZ

Mfr: Mori Seiki

Model: SL-45A/1500

Year: 1989

Used Mori Seiki SL-45A/1500 (1989) CNC Lathe for Sale. This heavy-duty turning center is a Fanuc CNC control and carries a 15″ chuck with 4″ bar capacity. Swing is 26.37″ with a 19.3″ turning diameter and 60.2″ distance between centers, and spindle speed runs to 1,000 RPM. The machine ...more

JUST ADDED!

Mori Seiki #SL-600C/2000, CNC turning center, 39.1" swing, 24" chuck, 10.8" bore, 35.4" diameter, 78.7" length, MSC-501, 10 turret, 60 HP, 2000

MachineStation | Lake Elsinore, CA

909-91... (Show) 909-919-9600

Seller: MachineStation

Location: Lake Elsinore, CA

Mfr: Mori Seiki

Model: SL-600C/2000

Year: 2000

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mori Seiki MSC-501 (Fanuc) CNC Control, Rigid ...more

Mori Seiki #SL-603B/1000, CNC turning center, 40.6" swing, 22" chuck, 51.2" centers, 35.4" dia., 39.3" lgth, MSG-501, 10 turret, A2-15, 2004

MachineStation | Lake Elsinore, CA

909-91... (Show) 909-919-9600

Seller: MachineStation

Location: Lake Elsinore, CA

Mfr: Mori Seiki

Model: SL-603B/1000

Year: 2004

Mori Seiki #SL-603B/2000, CNC lathe, 39" swing, 35.4" diameter x 78.7" L max, 7.3" bore, 50 HP, 1500 RPM, 10 turret, 6.5" bar, 25" chuck, Fanuc 21iTB Control, 4450 cut hours, 2011

Clark Machinery Sales LLC | Hunt Valley, MD

410-25... (Show) 410-252-5494

Seller: Clark Machinery Sales LLC

Location: Hunt Valley, MD

Mfr: Mori Seiki

Model: SL-603B/2000

Year: 2011

2011 MORI SEIKI SL-603B/2000, MAX SWING. 39.1", MAX CUTTING DIAMETER. 35.4", MAX CUTTING LENGTH. 78.7", X-AXIS TRAVEL. 19.1", Z-AXIS TRAVEL. 84.6", CHUCK SIZE. 25", BAR CAPACITY. 6.5", SPINDLE BORE. 7.3", SPINDLE NOSE. A2-15, SPINDLE MOTOR. 50 hp, SPINDLE SPEED. 1,500 RPM, TURRET POSITIONS. 10, FANUC 21iTB CONTROL ...more

JUST ADDED!

Mori Seiki #SL-603C/1000, CNC lathe, 10" bar, 35.4" diameter, 39.4" length, SMW AUTOBLOK 24" air 3-jaw chuck system, manual 24" 4-jaw chuck rear, 10 turret, MSX-501 w/ MAPPS, chip conveyor, tailstock, 2005

Protech Machine Tool Sales | Anaheim, CA

714-26... (Show) 714-266-2001

Seller: Protech Machine Tool Sales

Location: Anaheim, CA

Mfr: Mori Seiki

Model: SL-603C/1000

Year: 2005

2005 MORI SEIKI SL-603C/1000, Bar Capacity: 10, Spindle Speed: 1,000 RPM, Spindle Motor: 50 HP, X-Travel: 19 inches, Z-Travel: 43.3, Tool Positions: 10, Max Turning Diameter: 35.4, Max Turning Length 39.4, MSX-501 w/ MAPPS CNC Control, SMW AUTOBLOK 24 Air 3 Jaw Chuck System, Manual 24 4 Jaw Chuck Rear, Chip Conveyor ...more

JUST ADDED!

Mori Seiki #SL-65C, CNC lathe, 42.5" swing, 27.6" machining length, 25.6" turning diameter, 10.5" spindle bore, 50 HP, 660 RPM, Fanuc 16T, 1997

Lion Machinery LLC | Chicago, IL

630-34... (Show) 630-349-5153

Seller: Lion Machinery LLC

Location: Chicago, IL

Mfr: Mori Seiki

Model: SL-65C

Year: 1997

MORI SEIKI SL-65C CNC Lathe, 1997. Used condition. : 42.5 swing, 27.6 machining length, 50 power, max RPM 660, 25.6 turning dia. No tailstock, live tooling, or sub spindle. Ideal for high-performance turning operations., Make: Mori Seiki, Model: SL-65C, Year: 1997, Control: Fanuc 16T, Spindle Bore: 10.5.

4 Photos

Mori Seiki #SL-75MC, CNC Turning Center, 3-Jaw 24" chuck, 50" centers, hydraulic tailstock, Mori-Seiki CNC Control, 1996

Smith Machinery Co | Ames, IA

515-23... (Show) 515-233-6330

Seller: Smith Machinery Co

Location: Ames, IA

Mfr: Mori Seiki

Model: SL-75MC

Year: 1996

Center Distance 50 inches Position Turret 12 Dimensions (L x W x H) 242.3" x90.4" x125" Machine Weight 31858 pounds, * Mori Seiki CNC Controls, * 24" Diameter 3-Jaw Chuck, * Hydraulic Tailstock, * Mayfran Chip Conveyor: S/N: 33.

Mori Seiki #SL-80F, CNC lathe, 51.8" swing, 43" turning diameter, 9.8" machining length, 39" chuck, 8.5" bore, A2-15, 60 HP, 550 RPM, Fanuc MSC501, 6 tool, 1999

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Mori Seiki

Model: SL-80F

Year: 1999

Used CNC Lathe. Swing: 51.2", Machining Length: 9.8", Chuck Size: 39.4", Bar Capacity: 8.5", Power: 50.0, Max RPM: 143.0. Ideal for heavy-duty turning. No tailstock, live tooling, or sub spindle., Swing Over Bed: 51.8", Maximum Turning Diameter: 43", Spindle Speeds: 550 RPM, Spindle Motor: 60 HP, Spindle Bore: 8.5" ...more

7 Photos

JUST ADDED!

Mori Seiki #SL-8C, CNC lathe, 39.3" swing, 35.4" turning diameter, 43.3" centers, 14.5" bore, 10-370 RPM, 60 HP, 6 turret, 1983

Lion Machinery LLC | Chicago, IL

630-34... (Show) 630-349-5153

Seller: Lion Machinery LLC

Location: Chicago, IL

Mfr: Mori Seiki

Model: SL-8C

Year: 1983

MORI SEIKI SL-8C CNC Lathe, 1983, used. s: 39.3" swing, 43.3" machining length, 39" chuck, 14.5" bar capacity, 60.0 power, 370 max RPM, 35.4" turning diameter. Ideal for precision turning needs., Swing over Bed: 39.3", Swing over Carriage: 35.4", Distance between Centers: 43.3", Max Turning Diameter: 35.4", Max Cross ...more

Mori Seiki #TL-40, turning center, Fanuc 15, 8 turret, hydraulic Steady Rest, tailstock, chip conveyor, 1991, #25544

Die-Matic Tool & Machinery Inc. | Meridianville, AL

256-82... (Show) 256-828-3429

Seller: Die-Matic Tool & Machinery Inc.

Location: Meridianville, AL

Mfr: Mori Seiki

Model: TL-40

Year: 1991

MORI SEIKI TL-40 18"X120" FLAT BED TURNING CENTER, MODEL:TL-40, S/N: 2000, YEAR: 1991, FANUC 15 CONTROL, FANUC SYMBOLIC PROGRAMMING, CENTER DISTANCE: 120", MAX TURNING DIAMETER: 18", HYDRAULIC STEADY-REST, 8 TOOL TURRET, 2.5" SPINDLE HOLE, TAIL STOCK, CHIP CONVEYOR, COOLANT, 220 VOLT 3 PHASE, 24'6"X8'X6' ...more

Mori Seiki #TL-40B, CNC lathe, Fanuc Control, 24.4" swing, 12" chuck, tailstock, 25 HP, 1989

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: TL-40B

Year: 1989

1989 MORI SEIKI TL-40B, Swing. 24.41", Machining Length. 83.3", Chuck Size. 12", Power. 25 hp, Tailstock. Yes, Fanuc Control, Chip Conveyor.

6 Photos Video

JUST ADDED!

Mori Seiki #TL-40B, flat bed CNC lathe, 13.8" turning diameter, 116" Z, (2) 18" chucks, 4.6" bar, 40 HP, 2,500 RPM, tailstock, Fanuc MF-T6, 1995

Lion Machinery LLC | Chicago, IL

630-34... (Show) 630-349-5153

Seller: Lion Machinery LLC

Location: Chicago, IL

Mfr: Mori Seiki

Model: TL-40B

Year: 1995

MORI SEIKI TL-40B CNC Lathe, 1995 model in used condition. s include a 620 swing, 83.3 machining length, 12.0 chuck size, and 25.0 power with a maximum RPM of 12.0. Tailstock included. Ideal for precision machining needs., X Axis Travel: 9.3", Z Axis Travel: 116", Rapid Rate Z Axis: 378 IPM, Turret Tools: 10 Station ...more

Mori Seiki #TL-40B-3000, CNC flat bed turning center, MSC-518 Control, 24.4" swing, 122.6" centers, 12" chuck, 1997

Equipment Hub | Decatur, GA

770-62... (Show) 770-621-0495

Seller: Equipment Hub

Location: Decatur, GA

Mfr: Mori Seiki

Model: TL-40B-3000

Year: 1997

Stock #: 131240038, Location: FL, Brand: Mori Seiki, Model: TL-40B 3000, Year: 1997, Approx. Shipping Weight: 25,000 Lbs., Loading Fee: Rigging Required, Swing Over Bed: 24.41", Turning Diameter: 17.32", Machining Length: 114.37", Distance Between Centers: 122.6", Chuck Size: 12", Spindle Nose: ...more

10 Photos Video

Mori Seiki #TL-40B/3000, 24.4" swing, 12" chuck, 3.5" bar, 8 turret, Fanuc 10T, 30 HP, 2000 RPM, tailstock, chip conveyor, manual Steady Rest, 1989

Champion Machinery Inc | Fort Mill, SC

803-54... (Show) 803-548-8000

Seller: Champion Machinery Inc

Location: Fort Mill, SC

Mfr: Mori Seiki

Model: TL-40B/3000

Year: 1989

, Chuck Size 12", Max Diameter Bar Capacity 3.54", Max Swing Over Bed / Carriage 24.4" / 15", Max Machining Length 120", Spindle Motor 30 / 24.8 HP AC, Spindle Speed 7 - 2000 RPM, Spindle Nose A2-8, Spindle Bore 4.1", Tools 8, Rapid Traverse Rates (X / Z) 189 / 378 IPM, X-Axis Travel 9.2", Z-Axis 115", Turret Index ...more

Mori Seiki #TL-40B/3000, 2-Axis CNC lathe, 24.4" swing, 17.32" turning diameter, 114.37" machining length, 12" chuck, 4" bar, 30 HP, 2000 RPM, MSC-518 CNC Control, tailstock, 1997

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Mori Seiki

Model: TL-40B/3000

Year: 1997

Used CNC Lathe, 24.4" Swing, 114.37" Mach. Length, 30hp, 2k RPM Max, 12" Chuck, w/ MSC-518 Control & Chip Conveyor., 1997 MORI SEIKI TL-40B/3000, Swing. 24.4", Machining Length. 114.37", # Axis. 2, Chuck Size. 12", Bar Capacity. 4", Power. 30 hp, Max RPM. 2,000 RPM, Turning Dia. 17.32", Tailstock. Yes, Live ...more

Mori Seiki #ZL-15SMC, 5-Axis CNC lathe, 18.9" swing, 6"/4" chk, twin turret, live tooling, Fanuc, 1995

Franke CNC, LLC | Germantown, WI

262-30... (Show) 262-302-3672

Seller: Franke CNC, LLC

Location: Germantown, WI

Mfr: Mori Seiki

Model: ZL-15SMC

Year: 1995

CNC LATHES ZL-15SMC (1) USED MORI SEIKI MODEL ZL-15SMC 5-AXIS CNC LATHE WITH TWIN TURRETS, LIVE TOOLING, SUB-SPINDLE, C-AXIS AND FANUC CONTROL, 6 3-JAW CHUCK ON MAIN, 4 3-JAW CHUCK ON SUB S/N 343 NEW 1995 CAPACITIES SWING OVER BED: 18.9" SWING OVER CROSS SLIDE: 14.6" MAXIMUM MACHINING DIAMETER: 6.3 STANDARD MACHINING ...more

Mori Seiki #ZL-15SMC, CNC lathe Turning Center, 1" bore, MSC-516 Control, tool changer, 1997

HGR24 | Euclid, OH

216-48... (Show) 216-485-2976

Seller: HGR24

Location: Euclid, OH

Mfr: Mori Seiki

Model: ZL-15SMC

Year: 1997

TOOL CHANGER, FOOT PEDALS, 1" BORE, MORI SEIKI MSC-516 CONTROL PANEL, 32 KVA, 93 A, LATHE (12300#) 80X144X88, CHIP TRAY (380#) 40X78X20, CHIP CONVEYOR (450#) 28X110X58, ROLLERS (57#) 18X37X5, MADE IN JAPAN, *CONTAINS 4 PIECES.

Mori Seiki #ZL-250-MC/600, 6-Axis, MSC-501 CNC, 27.6" swing, 15.4" max turning, 2.9" bar, 3500 RPM, 18 live tool positions (10 upper turret/8 lower), 2000

Great American Eqpt Co | Cincinnati, OH

513-77... (Show) 513-771-2111

Seller: Great American Eqpt Co

Location: Cincinnati, OH

Mfr: Mori Seiki

Model: ZL-250 MC/600

Year: 2000

MORI SEIKI MULTI-AXIS CNC LATHE, Model ZL-250 MC/600, S/N 217, New 2000, Stock# Q12117, MSC-501 CNC Control, 18 Live Tool Positions (10 Upper Turret/8 Lower Turret), Tailstock, Royal FilterMist Mist Collector, Chip Conveyor, Coolant System., CATALOG : CNC Control MSC-501 CNC # Axis 6 Max Swing Over Bed 27.56" Max ...more

Mori Seiki #ZL-250MC/600, CNC lathe, 6-Axis, 27.6" swing, 28.5" Centers, 2.9" Bar, 15.4" Turning diameter, 25 HP, 3500 RPM, 18 Live Tool Positions, 2000

Toolquip Inc | Lebanon, OH

Seller: Toolquip Inc

Location: Lebanon, OH

Mfr: Mori Seiki

Model: ZL-250MC/600

Year: 2000

Used Multi-Axis CNC Lathe. s 6 axes, max swing 27.56", bar capacity 2.87", 25 hp spindle, live tooling, and more. Includes MSC-501 CNC, mist collector, chip conveyor, and coolant system. Weight: 17,000 lbs., # Axis. 6, Max Swing Over Bed. 27.56", Max Turning Diameter. 15.35", Center Distance. 28.54", # Turrets. 2 ...more

Mori Seiki #ZT-1000Y, CNC lathe, DMG Mori MSX-501 III Control, twin spindle & twin turret, 8-Axis, 9.8" swing, 6" chuck, 1.9" bar

Machinery Network Inc | Encino, CA

Seller: Machinery Network Inc

Location: Encino, CA

Mfr: Mori Seiki

Model: ZT-1000Y

MORI SEIKI ZT-1000Y, Swing. 9.8", Machining Length. 29.5", Turning Dia. 7.4", Bar Capacity. 1.9", Chuck Size. 6", # Axis. 8, Power. 15 hp, Max RPM. 6,000 RPM, Twin Spindle. Yes, Tailstock (Yes/No). No, DMG Mori MSX-501 III CNC Control, Y-Axis, LNS Quckload Servo 80, Parts Catcher.

7 Photos

Mori Seiki #ZT-2500Y, 2.8" bar, 14.9" turn diameter, 51.2" centers, Mitsubishi MSC 501 Control, 2001

Used Solutions Inc | Algonquin, IL

815-75... (Show) 815-759-5000

Seller: Used Solutions Inc

Location: Algonquin, IL

Mfr: Mori Seiki

Model: ZT-2500Y

Year: 2001

Mori Seiki #ZT-2500Y, CNC Turning Center, 8-Axis, dual spindle/turret, 14.9" turn diameter, 2.8" bar capacity, 4000 RPM

Aucto | San Francisco, CA

844-60... (Show) 844-605-1425

Seller: Aucto

Location: Elk Grove Village, IL

Mfr: Mori Seiki

Model: ZT-2500Y

The Mori Seiki ZT-2500Y is an 8-axis CNC Turning Center featuring a sub-spindle and twin turrets with live tool capability. It offers a maximum turning diameter of 14.9 inches and a maximum turning length of 14 inches, with a 2.8-inch maximum bar capacity. The maximum distance between spindles is 51.2 inches. Axis ...more

JUST ADDED!

Mori Seiki #ZT-2500Y, CNC Turning Center, Y-Axis, Live Tooling, Twin Turret, Twin Spindle 2007

Industrial Machinery NJ, LLC | Livonia, MI

732-36... (Show) 732-367-4130

Seller: Industrial Machinery NJ, LLC

Location: Livonia, MI

Mfr: Mori Seiki

Model: ZT-2500Y

Year: 2007

Mori Seiki ZT2500Y CNC Turning Center, 2007 – Y Axis, Live Tooling, Twin Turret, Twin Spindle 2007, Max. Swing Over Bed: 27.7″, Max. Swing Over Cross Slide: 16.5″, Max. Distance Between Centers: 51.2″, Max. Turning Diameter: 15.3″ (Main) / 14.1″ (Secondary), Standard Turning ...more

Mori Seiki #ZT-2500Y, twin spindle, live tool, Y-Axis, Mori Fanuc MSG501, 2001

Asset Exchange Corporation | Elk Grove Village, IL

773-86... (Show) 773-866-9600

Seller: Asset Exchange Corporation

Location: Elk Grove Village, IL

Mfr: Mori Seiki

Model: ZT-2500Y

Year: 2001

Overview, Type: Lathes CNC Manufacturer: ZT-2500Y Model: ZT-2500Y Year: 2001 Stock #: 62091 Status: For Sale Serial #: S/N 34, ImperialMetricsize 12" Chuck 12" Chuck Swing 14" 355.6 mm Machining Length 51" 1,295.4 mm # Axis 4 4 Chuck Size 12" 304.8 mm Bar Capacity 3.5" 88.9 mm Max RPM ...more