201 - 250 of 271 listings
79 Ton, Betenbender #8014, Hydraulic C-Frame Press, 42" x 17" Press Platen, 22.5" between housings, 15 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 8014
Betenbender HMI 79 Ton Hydraulic C-Frame Press, Inventory # 6904, Model: 8014, Made in USA, Tonnage Capacity: 79 Tons, Press Platen: 42″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Rod Diameter: 4″, Cylinder Bore Diameter: 9″, 1″ Cycles per Minute: ...more
80 Ton, Betenbender #HMI, C-frame press, 8" stroke, 14" throat, 9" bore
Vander Ziel Machinery Sales | Alto, MI
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Betenbender
Model: HMI
SKU #0428000, Throat Depth – 14 Inches, Throat Height – 18 Inches, Stroke Length – 8 Inches, Bore – 9, Tonnage @2500 PSI – 79, 2-Hand Controls w/ Auto Return – to – top, Variable tonnage controls, Pressure gauge, All steel construction, American made motor, Nema electronics ...more
90 Ton, Cincinnati, C-frame, 108" x48", down act, 72" daylight, 36" stroke, RIM clamp, #1225 (2 available)
Icon Industries, Inc | Grand Rapids, MI
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Cincinnati
CINCINNATI. NEW APPROX 1980. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE-ACTING CLAMP CYLINDERS: 6" BORE; 2.5" ROD; 1.25" PORTS. APPROX 72" DAYLIGHT; 36" STROKE AND 36" OPERATOR HEIGHT. FULLY GUIDED WITH 19" BUSHINGS ON FOUR 8" DIAMETER POSTS. TWO BOOKING CYLINDERS TOP AND TWO BOTTOM: 4" BORE; 3" ROD; ...more
98 Ton, Betenbender #10014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 44" x 17" Press Platen, 22.5" between housings, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 10014
Betenbender HMI 98 Ton Hydraulic C-Frame Press, Inventory # 6905, Model: 10014, Made in USA, Tonnage Capacity: 98 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 44″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
100 Ton, Denison #C94-Special, hydraulic c-frame press, 15" stroke, 24" daylight, 12" ram, 75 HP
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Denison
Model: C94-SPECIAL
MODEL #: 100 TON C FRAME C 94 SPECIAL, SERIAL #: 19620, 100 TON MAXIMUM CAPACITY, 15" STROKE, 24" DAYLIGHT, 12" DIAMETER RAM, 35" x 23" BED SIZE, 6" DIAMETER SHAFT, 3000 MAXIMUM P.S.I., PALM BUTTONS, LIGHT CURTAINS, 75 HP 230/460, 107" FB x 54"LR x 121" TALL, 17,000 LBS ESTIMATED WEIGHT, GOOD CONDITION.
Get email updates for newly added C Frame Hydraulic Press Machines (Gap Frame)
C Frame Hydraulic Press Machines (also known as gap frame presses) are machines that use hydraulic force to apply pressure for shaping, forming, or stamping materials. Featuring a C-shaped frame, these presses allow for easier access to the workpiece and are ideal for tasks like metal stamping, punching, and molding. Commonly used in industries like automotive, manufacturing, and metalworking, they are essential for producing high-precision parts in medium-duty applications.
100 Ton, Greenerd #H-100-30L5, hydraulic gap frame press, 12" stroke, 20" daylight, 10 HP, #10585
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Greenerd
Model: H-100-30L5
Used 100 Ton Greenerd H-100-30L5 Hydraulic Gap Frame Press, 1968 model. s a 100-ton capacity, 12" stroke, and 20" daylight opening. Bed area measures 30" L-R x 21.25" F-B. Includes 10 HP motor, 208/3/60 voltage, and 134-gallon oil reservoir., Capacity: 100 Ton, Stroke: 12, Daylight: 20, Throat: 13, Bed Area: 30 lr x ...more
100 Ton, Greenerd #HTC-100, Hydraulic Gap Frame Press, 10" stroke, 21.7" dl, 32" x 27" bed/ram, 7" cylinder diameter, 30 HP, 175-gallon reservoir, 2546 psi, 1986
Machinery Marketing International | Chicago, IL
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Greenerd
Model: HTC-100
Year: 1986
Used greenerd HTC-100. This pre-owned Hydraulic Press is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this greenerd Hydraulic Press we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection ...more
100 Ton, Greenerd, joggle C-frame, 20" stroke, 30" daylight, 42" x27" bed, 6" bolster, 16" throat, 1990, sr5637
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Seller: Alma Machinery Co-Ann Arbor MI
Location: Ann Arbor, MI
Mfr: Greenerd
Year: 1990
100 Ton, Wilson K.r. #C-100-1, C-frame hydraulic press, 16" stroke, 14" throat, 24" daylight, 10" Shut Height, 1975
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Wilson K.r.
Model: C-100-1
Year: 1975
100 TON K.R. WILSON "C-100-1" C-FRAME HYDRAULIC PRESS - 16" Stroke - 36" X 24" Bed - 14" Throat, 100 TON K.R. WILSON C-FRAME HYDRAULIC PRESS, Serial No 2936, Model C-100-1, Manual & Auto Controls, Tonnage Gauge, CATALOG :, Tonnage Capacity 100 TONS, Stroke Length 16", Throat Depth 14", Daylight, Maximum 24", Shut ...more
110 Ton, Aida #NC1-11(1), Gap Frame Press, 70 SPM, 4.33" stroke, air cooled & brakes, 3.54" adj., 12.6" Shut Height, 15 HP
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Aida
Model: NC1-11
110 Ton, Cincinnati #OBS, hydraulic C-frame press, 10" stroke, #15962
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Cincinnati
Model: OBS
SERIAL. 43955, MODEL. OBS, CAPACITY. 110 TONS, STROKE OF RAM. 10", RAM DIAMETER. 8", RAM ADVANCE SPEEDS. 600 / 150 IPM, RAM PRESSING SPEED. 60 IPM, RAM RETURN SPEED. 600 / 350 IPM, THROAT DEPTH. 25", POWERED CLAMPS ON BED. YES, AIR CUSHION ON BED. YES, CUSHION PRESSURE. ADJUSTABLE WITH READOUT, RUN MODES. INCH, SINGLE ...more
110 Ton, Cole-Tuve #CF-110, 11.8" stroke, 19.6" daylight, 7.88" Shut Height, 10.2" throat, dual palms, variable speed, 2003
Wisconsin Metalworking Machinery | Waukesha, WI
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cole-Tuve
Model: CF-110
Year: 2003
MANUFACTURER. COLE-TUVE MODEL. CF-110, SERIAL NUMBER. CF/SB-1-22003, AGE. 2003 TONNAGE. 110 TONS, STROKE (ADJ.).25" TO 11.8", MAX. SHUT HEIGHT. 7.88", DAYLIGHT (MAX OPENING). 19.6", THROAT DEPTH. 10.2", TABLE. 23.5" X 43.5", RAM. 16.5" X 26.8", VOLTAGE. 440 VOLTS, MOTOR. 10 HP, APPROXIMATE WEIGHT. 11,000 LBS ...more
110 Ton, Cole-Tuve #CF-110, C-frame hydraulic press, 11.8" stroke, 19.6" daylight, 7.88" Shut Height, 10.2" throat, 2003
HCI Machines | Venetia, PA
Seller: HCI Machines
Location: Venetia, PA
Mfr: Cole-Tuve
Model: CF-110
Year: 2003
110 TON COLE TUVE C-FRAME HYDRAULIC PRESSStk# 2104a :MANUFACTURER. COLE-TUVEMODEL. CF-110SERIAL NUMBER. CF/SB-1-22003AGE. 2003TONNAGE. 110 TONSSTROKE (ADJ.).25" TO 11.8"SPEEDSADVANCE. 50 IPMPRESS. 23 IPMRETURN. 137 IPMMAX. SHUT HEIGHT. 7.88"DAYLIGHT (MAX OPENING). 19.6"THROAT DEPTH. 10.2"TABLE. 23.5" X 43.5"RAM. 16.5" ...more
110 Ton, Energy Mission #CHP-100, C-frame press, 5.9"stroke, 11.8"throat, 16 SPM, 10 HP,build to order, new
Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: CHP-100
Overview, Type:C-Frame PressManufacturer:ENERGY MISSIONModel:CHP 100Condition:Build To OrderStock #:1824Status:For Sale, These presses are designed for various applications like straightening, trimming, Punching & stamping applications. Its unique design offers, the flexibility & ease of operation as three ...more
110 Ton, Greenerd #HC-110-21R, C-frame hydraulic press, 11.8" stroke, 19.7" daylight, 23.5" x43.5" tbl, 1977
HCI Machines | Venetia, PA
Seller: HCI Machines
Location: Venetia, PA
Mfr: Greenerd
Model: HC-110-21R
Year: 1977
110 TON GREENERD C-FRAME HYDRAULIC PRESSStk#: 2104bMODEL. HC-110-21RSERIAL NUMBER. 76T3416AGE. 1977TONNAGE.110 TONSSTROKE (ADJ.).25" TO 11.8"DAYLIGHT (MAX OPENING). 19.76"TABLE. 23.5" X 43.5"RAM. 16.5" X 26.8"RAM SPEEDS:ADVANCE. 50 IPMPRESS. 23 IPMRETURN. 137 IPMDUAL PALM BUTTON STATIONMOTOR HP:OIL ...more
110 Ton, Niagara #E-110, mechanical gap frame punch press, 5" stroke, 19.25" Shut Height, 42" x 27" bed, 40 SPM
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Niagara
Model: E-110
110 TON NIAGARA MODEL#E-110 MECHANICAL GAP FRAME PUNCH PRESS, 5" STROKE: STOCK 17122 SERIAL. 50628 MODEL. E-110 CAPACITY. 110 TON STROKE. 5" SHUT HEIGHT. 19.25" ADJUSTMENT. 5" MOTORIZED BED AREA. 42" X 27" BOLSTER. 4" THICK SLIDE AREA. 28" X 21" SPEED. 40 SPM CLUTCH & BRAKE. AIR CUSHION. YES PALM BUTTOMS AND FOOT ...more
118 Ton, Betenbender #12014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 44" x 17" Press Platen, 22.5" between housings, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 12014
Betenbender HMI 118 Ton Hydraulic C-Frame Press, Inventory # 6906, Model: 12014, Made in USA, Tonnage Capacity: 118 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 44″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
121 Ton, Komatsu #OBS-110-2L-VS-3, Gap Frame Press, air cooled & brake, 7.87" stroke, 17.7" Shut Height, 3.94" ram, 32-65 SPM, 2000
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Komatsu
Model: OBS-110-2L-VS-3
Year: 2000
121 Ton Press with Air Clutch, Air Brake, Air Counterbalance, Palm Buttons and Hydraulic Overload., Tonnage: 121 Ton, Stroke: 7.87”, Shut Height Over Bolster: 17.7”, Ram Adjustment Powered: 3.94”, Stroke Speed: 32 - 65 SPM, Ram: 23.63” X 21.65”, Bed: 43.31” X 27.5”, INCLUDES: ...more
121 Ton, Stamtec #G1-110, Gap Frame Press, air cooled & brake, 7.1" stroke, 13.7" Shut Height, 3.2" adj., 25.6" x18.5" ram, Wintress Smart PAC Control
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Stamtec
Model: G1-110
121 Ton Gap Frame Press with Air Clutch, Air Brake, Air Counter Balance, Palm Buttons, Hydraulic Overload, Light Curtains, Wintress Smart PAC Control and T - Slotted Ram & Bolster., Tonnage: 121 Tons, Stroke: 7.09”, Shut Height: 13.73”, Ram Adjustment Powered: 3.15”, Ram: 25.61” X ...more
125 Ton, Cincinnati, 108" x48", C-frame, 90" daylight, 54" stroke, 36" work height, optional booking, #1228
Icon Industries, Inc | Grand Rapids, MI
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Cincinnati
CINCINNATI. NEW APPROX 1987. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE- ACTING CLAMP CYLINDERS: 7" BORE; 4" ROD; 2" FOUR BOLT FLANGE. APPROX. 90" DAYLIGHT; 54" STROKE AND 36" OPERATOR HEIGHT. FULLY GUIDED WITH 19" BUSHINGS ON FOUR 8" DIAMETER POSTS. TWO BOOKING CYLINDERS TOP AND TWO BOTTOM: 4.5" ...more
141 Ton, Betenbender #14014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 44" x 17" Press Platen, 22.5" between housings, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 14014
Betenbender HMI 141 Ton Hydraulic C-Frame Press, Inventory # 6907, Model: 14014, Made in USA, Tonnage Capacity: 141 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 44″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
150 Ton, Hannifin #T150, hydrauic C-frame press, 29" x 39" table area, 15 HP, single hand lever
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hannifin
Model: T150
SERIAL. 9281MODEL. T150CAPACITY. 150 TONSTROKE. 24"AREA TABLE. 29"X 39"OPEN HEIGHT OVER TOP TABLE. 9" MIN, 33" MAXDEPTH OF THROAT. 18"RAM SPEED DOWN. IPMRAM SPEED RETURN. IPMRAM DIAMETER."SINGLE HAND LEVER. YESMOTOR HORSEPOWER. 15.
150 Ton, Hannifin C-Frame, traveling gantry, 18" stroke, 18" x 20' bed, 24" DLO, very rare
Peterson Machinery Sales | Casa Grande, AZ
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Hannifin
Manufacturer Hannifin Model 100 Ton Condition Used Stock Number 3875 Stroke 17" Bed Area 19"x18" Distance Floor to Bed 19" Throat Depth 22" Ram Area 7.5".
150 Ton, Hidroliksan #CFDD-150, C-frame press,HMI Touch Screen Control Panel,Build To Order
Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Hidroliksan
Model: CFDD-150
Overview, Type:C-Frame PressManufacturer:HIDROLIKSANModel:CFDD 150Condition:Build To OrderStock #:1832Status:For Sale, *ADDITIONAL CAPACITIES AVAILABLE*, Chrome Plated Cylinder, Steel Welded Frame, HMI Touch Screen Control Panel, Safeyt Cover and Light Barrier, Two Hand Button Control, Adjustable Variable Pressure on ...more
150 Ton, Hidroliksan #CFSS-100, C-frame, 31.4"x19.6"table, 15.7" stroke, 19.6" daylight,Build To Order
Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Hidroliksan
Model: CFSS-100
Overview, Type:C-Frame PressManufacturer:HIDROLIKSANModel:CFSS 100Condition:Build To OrderStock #:1830Status:For Sale, C FRAME SINGLE ACTION PRESSES, Produced up to 250 Ton capacity, Hidroliksan C type Presses are normally of standard size, yet can be produced according to customer requirements. C type presses can be ...more
150 Ton, Komatsu #OBS150-3, Gap Frame Press, 7.87" stroke, 3.94" adj, 21.3" Shut Height, 49.2" x 31.5" bed, 28.4" gap, 14.8" throat, 27-55 SPM, air clutch & brake, 1988
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Komatsu
Model: OBS150-3
Year: 1988
YODER BROTHERS MACHINERY STOCK #16340, SERIAL. 11181, MODEL. OBS150-3, NEW. 12-1988, CAPACITY. 165 TONS, STROKE. 7.87" (200 MM), ADJUSTMENT, MOTORIZED. 3.94" (100 MM), SHUT HEIGHT OVER BOLSTER. 17.72" (450 MM), SHUT HEIGHT OVER BED. 21.29" (615 MM), BOLSTER AREA. 49.2" L-R x 31.5" F-B (1250 X 800 MM), BOLSTER ...more
150 Ton, Press Master #CFP-150T, hydraulic press, 15" stroke, 20.5" daylight, 13" throat, 20 HP, #126572
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-150T
150 TON PRESSMASTER HYDRAULIC C-FRAME PRESSMODEL CFP-150T… BRAND NEW RATED CAPACITY. 150 TONSAPPROACH SPEED. 80 IPMPRESSING SPEED. 9 IPMRETURN SPEED. 101 IPMTABLE WIDTH.″4"TABLE DEPTH. 20"U-SLOT WIDTH. 4"DAYLIGHT. 20-1/2"FULL STROKE. 15"THROAT. 13"TABLE ...more
150 Ton, Standard #DC-150, C-frame hydraulic press, 10" stroke, 22" daylight, 13" throat, 24" x34"bed, 2007
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Standard
Model: DC-150
Year: 2007
Model #DC-150 Serial #1207663 Age 2007 Stroke 10” Daylight 22” to bed Bed 24” x 34” Ram size 16” x 19” Throat depth 13” Speeds: 140 IPM closing 25 IPM pressing 210 IPM return Infared Dual Palm Controls Banner Light curtains 40 HP motor & hydraulic pump.
150 Ton, Standard #DC150, 24" x 34" bed, 10" stroke, 22" daylight, 2007
Planet Machinery Co | Grand Haven, MI
Seller: Planet Machinery Co
Location: Grand Haven, MI
Mfr: Standard
Model: DC150
Year: 2007
150 Ton, Standard Industrial #DC150, C-frame hydraulic press, 18" stroke, 30 HP, electric foot pedal
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Standard
Model: DC150
SERIAL. 12121996, MODEL. DC150, YEAR NEW. 2020, CAPACITY FORMING. 150 TON, STROKE. 18", OPEN HEIGHT. 24", CLOSED HEIGHT. 6", RAM AREA T SLOTTED. 19" X 16", BED AREA T SLOTTED. 34.5" X 24", THROAT. ", DISTANCE BETWEEN HOUSINGS. ", RAM SPEEDS (RAPID). 145 IPM, RAM SPEED NORMAL PRESS. 25 IPM, RAM SPEED RETURN. 210 IPM, 8 ...more
150 Ton, C-frame press, 16" x 120" electric platen
Erie Mill & Press Co Inc | Erie, PA
Seller: Erie Mill & Press Co Inc
Location: Erie, PA
160 Ton, Eitel #RP160, hydraulic c-frame press, 10" stroke, 28-3/8" daylight, 13.75" throat, 1976
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Eitel
Model: RP160
Year: 1976
Dimensions64" X 64" X 106" Weight10500 pounds, SERIAL. 14092 NEW. 1976 MODEL. RP160 CAPACITY. 160 TONS DIAMETER OF RAM. 10", STROKE. 10", DAYLIGHT OVER TABLE. 28-3/8" RAM SPEEDS - UP. 375 IPM RAM SPEEDS - DOWN. 90 IPM TABLE AREA DIMENSIONS. 12" X 60" THROAT DEPTH. 13-3/4" RAM CONTROLS. HAND LEVER, PRECISE "FEATHER" ...more
165 Ton, Betenbender #16514, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 36" x 14.5" Press Platen, 37" H Table, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 16514
Betenbender HMI 165 Ton Hydraulic C-Frame Press, Inventory # 6915, Model: 16514, Made in USA, Throat Depth: 14″, Throat Height: 18″, Press Platen Size: 36″ x 14 1/2″, Rated Capacity: 165 Tons, Stroke Length: 8″, Cylinder Bore Diameter: 13″, Table Height: 37″, Ram Diameter: ...more
165 Ton, Energy Mission #CHP-150, C-frame press, 7.8" stroke, 11.8" x 11.8" table, 15 HP, 16 SPM
Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: CHP-150
Overview, Type:C-Frame PressManufacturer:ENERGY MISSIONModel:CHP 150Condition:Build To OrderStock #:1825Status:For Sale, These presses are designed for various applications like straightening, trimming, Punching & stamping applications. Its unique design offers, the flexibility & ease of operation as three ...more
165 Ton, Komatsu #OBS150-5, Gap Frame Press, 9.84" stroke, 18.8" Shut Height, 3.94" adj., 27.6" x21.7" ram, air cooled & brake, 1997
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Komatsu
Model: OBS150-5
Year: 1997
165 Ton Press with Air Clutch & Brake, Air Counterbalance, Hydraulic Overload, Light Curtains and 6 - Station Rotary Table., Tonnage: 165 Tons, Stroke: 9.84”, Shut Height: 18.8”, Ram Adjustment: 3.94”, Stroke Speed: 27 - 55 SPM, Ram: 27.6” X 21.7”, Bed: 49.2” X 29.9” ...more
175 Ton, Cincinnati #OBS175, hydraulic gap frame press, 10" stroke, 22" daylight, 50" x 30" bed, 4.2 FPM, 25 HP
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Cincinnati
Model: OBS175
10" STROKE. PRESSING 50 IPM. PALM BUTTONS, FOOT PEDAL. 24" X 34" RAM. SPEEDS, ADVANCE 460 IPM..
176 Ton, Accurl #HPP-160T/16T, hydraulic C-frame press, 22" stroke, 44" daylight, 39" x29.5"bed, 2014
Presses for Industry | Detroit, MI
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Accurl
Model: HPP-160T/16T
Year: 2014
ACCURL 176 TON GAP FRAME HIGH SPEED PRESS, Preliminary :, TON, 176 T, BED L-R, 39 in, BED F-B, 29.5 in, STROKE, 22 in, DAYLIGHT OPENING, 44 in, SPEED, 15 mmps, CUSHION, Yes, DIMENSIONS, 72" x 72" x 144" tall, WEIGHT, 26,500.00, Capacity: 176 US Tons, Return Force: 23 US Tons, Max Stroke: 22", Daylight Opening: 44" ...more
200 Ton, Energy Mission #CHP-200, C-frame, 20 HP, 200" mm ram stroke, 750x750mm table,build to order
Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: CHP-200
Overview, Type:C-Frame PressManufacturer:ENERGY MISSIONModel:CHP 200Condition:Build To OrderStock #:1826Status:For Sale, These presses are designed for various applications like straightening, trimming, Punching & stamping applications. Its unique design offers, the flexibility & ease of operation as three ...more
200 Ton, Greenerd #HC-200-60Y38, C-frame hydrauic press, downstroke type, 60" x 38" bed, 1980
Kempler Machinery | Elk Grove Village, IL
Seller: Kempler Machinery
Location: Elk Grove Village, IL
Mfr: Greenerd
Model: HC-200-60Y38
Year: 1980
200 Ton Greenerd Model HC-200-60Y38 Open Gap C-Frame Hydraulic Press, 18" str., 24" DL, 50" x 29" bed, 4-post guided slide, ejector, #89564., 139" high with cooling unit.
200 Ton, Hannifin, gap frame, hydraulic, 36" x 72" bed/ram, 48" stroke, 65" DLO, reconditioned
Peterson Machinery Sales | Casa Grande, AZ
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Hannifin
Integral Hydraulic tank with Hyd. pump and motor mounted on top of machine..
200 Ton, Hannifin, C-frame Hydraulic Press
Peterson Machinery Sales | Casa Grande, AZ
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Hannifin
Integral Hydraulic tank with Hyd. pump and motor mounted on top of machine..
200 Ton, Niagara #S2G-200-60-30, 10" stroke, 24" shut height, 6" ram adj., 30 SPM, 60" x 30" bed, 1982
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Niagara
Model: S2G-200-60-30
Year: 1982
200 Ton Double Crank Gap Frame Press with Palm Buttons, Air Clutch & Brake, Air Counterbalance, Floor Standing, T-Slotted Ram and Bolster, Stroke: 10", Shut Height: 24", Powered Ram Adjustment: 6", SPM: 30, Bed: 60" X 30", Ram: 60" X 30", Electrical: 480 V / 3 Phase, Dimensions: 124" Lr X 114" Fb X 184" Tall ...more
200 Ton, Press Master #CFP-200, hydraulic C-frame press, 15" stroke, 20" daylight, 13" throat
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-200
200 TON PRESSMASTER HYDRAULIC C-FRAME PRESSMODEL CFP-200T… BRAND NEW RATED CAPACITY. 200 TONSAPPROACH SPEED. 65 IPMPRESSING SPEED. 6 IPMRETURN SPEED. 78 IPMTABLE WIDTH.″5"TABLE DEPTH. 22"U-SLOT WIDTH. 4"DAYLIGHT. 20"FULL STROKE. 15"THROAT. 13"TABLE ...more
JUST ADDED!
200 Ton, C-Frame Hydraulic Press, 29" stroke, 37" opening, 29-1/2" shut height, 48" x 36" bed, 480 V., (2) 1/4 ton jib rails
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
STROKE ---------------------------------- 29 in, BED SIZE -------------------------------- 48 in X 36 in, OPENING --------------------------------- 37 in, FILLER ON CYLINDER ---------------------- 7 1/2 in, SHUT HEIGHT (BED TO BOTTOM OF CYLINDER) - 29 1/2 in, ELECTRICS ------------------------------- 480 VOLTS ...more
220 Ton, RMT #H-SMART-C220, C frame hydraulic press, 36" x24" table, 20" daylight, 16" stroke, 4" open, 20 HP
Revolution Machine Tools Inc | North Salt Lake, UT
Seller: Revolution Machine Tools Inc
Location: North Salt Lake, UT
Mfr: Rmt
Model: H-SMART-C220
RMT™ C type deep drawing presses, which are produced to up to 275 Tons capacity, can be customized and made up to a certain size of a table depending on the customers requirements. The frame is in the form of a C and because of its shape, the space in the frame increases and this causes the frame to flex. The C ...more
250 Ton, Eitel #RP250, hydraulic c-frame press, 12" stroke, 28-3/8" daylight, 16" throat, 1979
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Eitel
Model: RP250
Year: 1979
SERIAL. 25140 MODEL. RP250 CAPACITY. 250 TONS DIAMETER OF RAM. 14", STROKE. 12", DAYLIGHT OVER TABLE. 28-3/8", THROAT DEPTH. 16", RAM SPEEDS - UP. 375 IPM RAM SPEEDS - DOWN. 90 IPM TABLE AREA DIMENSIONS. 12" X 60", TABLE EXTENSION. YES, 60" LONG RAM CONTROLS. HAND LEVER, PRECISE "FEATHER" CONTROL. YES, HYDRAULIC ...more
250 Ton, Greenerd #HCA-250, C-Frame hydraulic press, 18" stroke, 24" daylight, 16" throat, 300 gallon hydraulic reservoir, 1994
Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Greenerd
Model: HCA-250
Year: 1994
GREENERD HCA-250 250 Ton C Frame Hydraulic Press USA, Reference #6735, Model # HCA-250-42R10, Serial # 94T4773, Year of manufacture- 6/1994’, Table size- 41” x 29”, Ram size- 37” x 20”, Throat- 16”, Daylight- 24”, Stroke length- 18”, Table working height- 40”, Ram ...more
250 Ton, Hannifin #F-55410, C-frame hydraulic press brake, 42" stroke, 56" daylight, 70" x 36" bed, light curtain
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Hannifin
Model: F-55410
MANUFACTURER. HANNIFIN, TONNAGE. 250, STROKE. 42", DAYLIGHT. 56", OPEN HEIGHT. 14", BED SIZE. 70" (L-R) X 36" (F-B), RAM SIZE. 70" (L-R) X 36" (F-B), SPEEDS:, DOWN ADVANCE ADJUSTMENT. 125 TO 1000 IN/MIN, DOWN SLOW. 125 IN/MIN, DOWN FEED. 60 IN.MIN, UP FAST. 900 IN/MIN, UP SLOW. 450 IN/MIN, PALM BUTTON CONTROLS. YES ...more
250 Ton, Hidroliksan #CFS-100, C-frame,chrome plated cylinder,steel welded frame,t-slot table
Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Hidroliksan
Model: CFS-100
Overview, Type:C-Frame PressManufacturer:HIDROLIKSANModel:CFS 100Condition:Build To OrderStock #:1831Status:For Sale, *Additional Sizes available*, C FRAME SINGLE ACTION PRESSES, Produced up to 250 Ton capacity, Hidroliksan C type Presses are normally of standard size, yet can be produced according to customer ...more
250 Ton, Pacific #250-PF-OBS, Hydraulic C Frame Press, 12" stroke, 21-3/4" open height, 18" throat, 1978
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Pacific
Model: 250-PF-OBS
Year: 1978
PACIFIC 250 TON PF HYD C FRAME PRESS, STOCK# 14481J, MODEL 250-PF-OBS, NEW 1978, S/N 8048, 12" STROKE, 21-3/4" OPEN HEIGHT, 9-3/4" CLOSED HEIGHT, 18" THROAT, 58-1/2" X 34-1/2" BOLSTER 6" THICK, 36-1/2" X 28-1/2" RAM, CUSHION PAD, T-SLOTTED BOLSTER AND RAM, PALM BUTTONS, SPEEDS:, 324 IPM ADVANCE, 120 IPM FAST PRESS 42 ...more
