1 - 50 of 147 listings
Featured
Haas #Bar-300, Bar Feeder, 62" capacity, 2008
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Haas
Model: BAR-300
Year: 2008
Inventory No. 1124-036-0154 Manufacturer Haas Model No. BAR 300 Name Bar Feeder Arrival Date 10-28-2025 Dimensions L x W x H (inches) 99 x 64 x 56 Capacity 62" Weight (lb.) 1250 Category CNC Condition Used Available Quantity 1 Serial No. 93100 Make Year 2008.
Alpha #SL65S, Bar Feed, 12"-61" L, 67mm capacity, 2013
Source Machinery Sales | Fridley, MN
Category: Bar Feeders and Loaders
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Alpha
Model: SL65S
Year: 2013
Located in Minnesota, this high-capacity bar feeder is designed to streamline automated turning and machining operations with flexible loading and precision handling., The unit accommodates bar diameters from 6 mm to 67 mm and bar lengths of 12 to 61 (3001550 mm), limited by the spindles overall capacity. Bars are ...more
Alpine #542S45L2A, tornado bar loader / feeder, GE Fanuc PLC, #69122
Yoder Machinery Sales | Holland, OH
Category: Bar Feeders and Loaders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Alpine
Model: 12 X 1-5/8
SERIAL. 00899255, MODEL. 542S45L2A, TYPE. TORNADO, BAR CAPACITY. 1/4" TO 1-5/8", BAR LENGTH. 14'1-1/4" MAXIMUM, BAR CHANGE TIME. 25 SECONDS, CONTROL. GE FANUC PLC.
AMD, 20' bar & pipe descrambler rack & loader
National Machinery Exchange | Newark, NJ
Category: Bar Feeders and Loaders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Amd
20' AMD BAR & PIPE DESCRAMBLER RACK & LOADER.
JUST ADDED!
ATS #ML-565, automatic barfeed, 2.6" bar round cross section, 60" length, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Ats
Model: ML-565
Year: 2011
ATS ML565 Auto Barfeed (subject to buyer verification):Scope of application: Bar dimensionBar round cross section: 6 to 67mm / 2.6”Bar hexagonal cross section: 8 to 58mmBar square cross section: 8 to 47mmBar weightMaximum weight of the loaded bar 60 kgBar lengthMaximum length of the bar handled by the barfeeder ...more
JUST ADDED!
ATS #ML-580, automatic barfeed, .25" to 3-1/8" bar round capacity, 3-8" to 2.5" bar hexagon, 3/8" to 2-1/8" bar square, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Ats
Model: ML-580
Year: 2014
ATS ML580 Automatic Barfeed (subject to buyer verification):Bar Round Capacity.25” to 3 1/8”Bar Hexagonal 3/8” to 2.5”Bar Square 3/8” to 2 1/8”Max Weight of Per Loaded Bar 132 lbsMax Length of Bar Handled by BF 60”Current Max Length is 42″Pusher StrokeDesign Stroke ...more
Get email updates for newly added Bar Feeders and Loaders
Bar Feeders and Loaders (also known as bar loading systems or bar stock feeders) are devices designed to automatically feed bar stock into lathes or other machining equipment. Commonly used in industries like automotive, aerospace, and manufacturing, these systems improve production efficiency by reducing manual handling and enabling continuous operation. Bar feeders and loaders are essential for high-volume machining, ensuring precision, consistency, and streamlined workflows.
ATS #ML-580, magazine type bar loaders, 3.1496" capacity, 5' bar length, 2015
JYC Machinery | Aventura, FL
Category: Bar Feeders and Loaders
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Ats
Model: ML-580
Year: 2015
, Unit in good operating Conditions, Imperial Metric Capacity 3.1496" 80 mm Bar Length 5' 1.5 m.
ATS #ML-580, magazine type bar loader, 3.15" capacity, 5' bar length, 2018
PM Machines | Santa Ana, CA
Category: Bar Feeders and Loaders
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Ats
Model: ML-580
Year: 2018
2018 ATS ML-580, Capacity. 80 mm, Bar Length. 5'.
Autobar #400, Servo bar feeder,.25"-4" bar capacity, 60" bar length, 28"-58" height adjustment
R.A.B. Industries Inc | Washington, MI
Category: Bar Feeders and Loaders
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Autobar
Model: 400
Year: 1996
1-USED AUTOBAR 400 SERVO BAR FEEDER, MACHINE SERIAL NUMBER 099, DATE OF MFG. 12/1996, STK#103503, ======================================================, WHILE OBTAINED FROM SOURCES DEEMED, RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE, AND TO VERIFICATION BY BUYER.
Bestline #AL-500SX, power feed & power draw bar, table feed, 4-160 RPM, 110V
Myers Technology Co LLC | Elk Grove Village, IL
Category: Bar Feeders and Loaders
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Bestline
Model: _UNKNOWN_
Power Feed & Power Draw Bar, Table feed, power feed, Model AL-500SX, Speed range 4-160 RPM, Rapid speed 200 RPM, Voltage 110V, 50/60Hz, 1 phase, Torque Ave. 150, Maximum torque 650 In-. lbs., Installation extra $150.00, Ext Shaft Kit w/ dial, shaft and braket, to restaore full travel after $155.00, Shaft install ...more
CNC Enhancements #AB-400, Bar Feeder, 60" capacity, 2001
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Cnc Enhancements
Model: AB-400
Year: 2001
Inventory No. 1125-007-0002 Manufacturer Cnc Enhancements Model No. AB-400 Name Bar Feeder Arrival Date 11-12-2025 Dimensions L x W x H (inches) 92 x 65 x 66 Capacity 60" Weight (lb.) 1475 Category CNC Condition Used Available Quantity 1 Serial No. 640 Make Year 2001 Item Made In Usa.
CNC Enhancements #Autobar-400, Bar Feeder, 60" x 40" capacity, 1999
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Cnc Enhancements
Model: AUTOBAR-400
Year: 1999
Inventory No. 1125-062-0047 Manufacturer Cnc Model No. AB-400 Name Bar Feeder Arrival Date 01-23-2026 Dimensions L x W x H (inches) 86 x 66 x 67 Capacity 60" X 40" Weight (lb.) 1465 Category CNC Condition Used Available Quantity 1 Serial No. 535 Make Year 1999.
JUST ADDED!
CNC Enhancements #SB-300-H, Bar Feeder, 60" capacity, 1998
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Cnc Enhancements
Model: SB-300-H
Year: 1998
Inventory No. 1124-036-0158 Manufacturer Cnc Enhancements Model No. SB-300-H Name Bar Feeder Arrival Date 02-19-2026 Dimensions L x W x H (inches) 83 x 53 x 50 Capacity 60" Weight (lb.) 885 Category CNC Condition Used Available Quantity 1 Serial No. 055 Make Year 1998.
Edge Technologies #Minuteman-320SE, magazine bar loader, 9' 4" overall, 1.062" bar capacity, 6' bar length, 10" rack capacity, 2014
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MINUTEMAN-320SE
Year: 2014
EDGE MINUTEMAN″20SE MAGAZINE BARFEEDNEW: 2014 :BAR DIAMETER CAPACITY. (3mm-26mm)0.118"-1.062"BAR LENGTH. 6'MINIMUN BAR LENGTH.″9.4"MAXIMUM REMNANT LENGTH. 16.5"MAGAZINE RACK CAPACITY. 10"APPROX. MACHINE WEIGHT. 1300 LBS. OVERALL LENGTH 9'4".
Edge Technologies #Miyano-M-542, magazine bar feed, 1.26" diameter, 12' length, 2021
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MIYANO-M-542
Year: 2021
EDGE TECH MIYANO 542 MAGAZINE BARFEED NEW: 2021 ** HAS NEVER BEEN USED ** This barfeed has never had any bars installed in it for use. It was purchased to be used on a Miyano BNA-42GTY Direct From OEM Brochure: Power consumption: 2 KWFeed force: adjustable, max. 450 N (101 lbf)Forward feed rate: adjustable 750 mm/sec ...more
JUST ADDED!
Edge Technologies #Patriot-551, Magazine-Type Bar Loader, 2" capacity, 96" Bar length, 16" max Remnant length, 12" Magazine Rack capacity, 1.5 kW, 230 V, 2011
Toolquip Inc | Lebanon, OH
Category: Bar Feeders and Loaders
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Edge Technologies
Model: PATRIOT 551
Year: 2011
Used Magazine type bar loader, used condition. s a bar capacity of 2" and length up to 8'., Bar Capacity, No Prep: 5mm to 44.5mm (.196" to 1.75"), With Prep: 5mm to 51 mm (.196" to 2.000"), Maximum Bar Length: 8', Minimum Bar Length: 39.4", Maximum Remnant Length: 16", Magazine Rack Capacity: 12", Bar Loading ...more
Edge Technologies #Patriot-551, barfeed, 2" bar capacity, 8' bar length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2019
, Bar Capacity, 0.196" to 2.000", Maximum Bar Length, 6 feet, Minimum Bar Length, 39.4 inches, Magazine Rack Capacity, 12 inches, Material Straightness,.007"TIR/ft of material (V Blocks, 3 points equidistant), Feed Force (pusher torque), max 450N, adjustable, Foward Feed Rate, 750 inches/min max ...more
Edge Technologies #Patriot-551, barfeed, 2" bar capacity, 8' bar length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2019
, Bar Capacity, 0.196" to 2.000", Maximum Bar Length, 6 feet, Minimum Bar Length, 39.4 inches, Magazine Rack Capacity, 12 inches, Feed Force (pusher torque), max 450N, adjustable, Foward Feed Rate, 750 inches/min max, adjustable, Return Feed Rate, 1000 inches/min max, adjustable, Operating Voltage, 230V/60 ...more
Edge Technologies #Patriot-551, magazine type bar loaders, 2.0079"cap., 12' bar length, 2021
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2021
EDGE Patriot 551 Magazine Bar Loader (used) New 2021 - used on a fixed headstock CNC Lathe w/ 2 channel sets, 5mm to 51mm, 12' bars, barely used, like new condition. Great Deal! Capacity 2.0079" Bar Length 12'.
Edge Technologies #Patriot-551, automatic bar loader, 2" capacity, 8' bar length, 2011
Machinery Resources Intl | Simi Valley, CA
Category: Bar Feeders and Loaders
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2010
Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011, Can load up to 8' bars, 45mm channel installed, To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm ...more
Edge Technologies #Patriot-551-37, barfeed, 2" bar, 8' length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: PATRIOT-551-37
Year: 2019
, Bar Capacity, 0.196" to 2.000", Maximum Bar Length, 6 feet, Minimum Bar Length, 39.4 inches, Magazine Rack Capacity, 12 inches, Feed Force (pusher torque), max 450N, adjustable, Foward Feed Rate, 750 inches/min max, adjustable, Return Feed Rate, 1000 inches/min max, adjustable, Operating Voltage, 230V/60 ...more
JUST ADDED!
Edge Technologies #Rebel-80, barfeed, .315" to 3.150" bar diameter, 60" bar length, 30" magazine rack capacity, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-80
Year: 2022
Edge Technologies Rebel 80 Barfeed (subject to buyer verification):Bar diameter capacity 8mm to 80mm (.315” to 3.150”)Maximum bar length 60” (NOT TO EXCEED SPINDLE LENGTH)Magazine rack capacity 30” (60 ½” bars, 30 1.0” bars, 15 2.0” bars)Bar weight 175 lbs. per bar not ...more
Edge Technologies #Rebel-80, servo bar feed, 0.315" diameter, 3" bar, 2020
Clark Machinery Sales LLC | Hunt Valley, MD
Category: Bar Feeders and Loaders
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Edge Technologies
Model: REBEL-80
Year: 2020
2020 EDGE TECHNOLOGIES REBEL 80 SERVO, Capacity. 3.15", Bar Length. 3', Weight. 1100 LBS, RIGHT SPINDLE LINER - EXTENDED TYPE - 2.380" DIAMETER, X-AXIS AXIAL SHIFT, (1) PUSHER LENGTH FOR PART VARIANCE WITH RUBBER ID GRIPPER, EXTENDED V-TRAY TO REACH BACK OF RIGHT-SPINDLE, COOLANT PAN IN V-TRAY AREA FOR EXCESSIVE ...more
Edge Technologies #Rebel-80, bar feed, .315"-3.150" round diameter, 60" bar stick length, 2020
Harris Machine Tools, Inc. | Houston, TX
Category: Bar Feeders and Loaders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Edge Technologies
Model: REBEL-80
Year: 2020
Edge Technologies #Rebel-102-Servo, Barfeed, 8-102mm bar diameter, 60" L bar, 30" magazine capacity, 20 sec. cycle time, 2020
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-102-SERVO
Year: 2020
Edge Technologies Rebel 102 Servo Automatic Barfeed (subject to buyer verification):Bar diameter capacity: 8 mm to 102 mm (.315” to 4.000”)Maximum bar length: 60” (Not to exceed spindle length)Magazine rack capacity: 30” (762 mm)Bar loading cycle time: 20 secondsPower consumption: 1 kW – ...more
JUST ADDED!
Edge Technologies #Rebel-EcoFeed-V65LE, automatic barfeed, .19"-2.56" bar diameter, 61" bar length, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-ECOFEED-V65LE
Year: 2021
Edge Technologies Rebel-V65LE Automatic Barfeed – 2021 (subject to buyer verification):Diameter of Bar:.19” – 2.56”Length of Bar: Max 61” (Will depend on Spindle Length)Spindle Height: 36”-51”Weight: 617 lbs (subject to buyer verification):Control.
Edge Technologies FMG #Turbo-5-65, barfeeder, 2.44" bar, 12' 5" bar length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: TURBO-5-65
Year: 2019
, Bar diameter capacity-no bar preparation,.196 to 2.440, Bar diameter capacity-with bar preparation:,.196 to 2.637, Maximum bar length:, 6 feet, Minimum bar length:, 39.400, Maximum remnant length:, 20.800, Magazine rack angle:, adjustable 620, Bar loading cycle time:, 35 seconds for 6-foot bar, Operating voltage: ...more
Edge Technologies #V-65E-CE-A, magazine type bar loader
iGAM | Detroit, MI
Category: Bar Feeders and Loaders
Seller: iGAM
Location: Detroit, MI
Mfr: Edge Technologies
Model: V-65E-CE-A
EDGE TECHNOLOGIES V-65E-CE-A Magazine Type Bar Loader for sale, used condition. Ideal for enhancing manufacturing efficiency. Quality build suitable for various industrial applications. Contact us for more., Spec Sheet, EDGE TECHNOLOGIES V-65E-CE-A, Dimensions. 67X45X47, Weight. 604 LBS.
JUST ADDED!
Edge Technologies Servo Unloader Rebel 80
MRO Exchange | Fairfield, IL
Category: Bar Feeders and Loaders
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Edge Technologies
Used in CNC turning cells sub-spindle lathes, the Edge Technologies Rebel 80 Servo Unloader is a compact, servo-driven part extraction and conveyance system designed to automatically remove finished parts from the sub-spindle of single-spindle CNC lathes. The unit accepts parts ranging from 8 mm to 80 mm (0.315 in. to ...more
FMB #Mini-Turbo, bar feeder, #69120
Yoder Machinery Sales | Holland, OH
Category: Bar Feeders and Loaders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Fmb
Model: MINI-TURBO
FMB #SL-80, short magazine bar feed, 3" diameter, 48" length, 2001
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Fmb
Model: SL-80
Year: 2001
FMB SL-80 Short Magazine Bar FeedNew: 2001….
FMB #Turbo-2-20, magazine type bar loader, 0.7874" capacity, 12' bar length, 2022
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-2-20
Year: 2022
FMB Turbo 2-20 Magazine Bar Loader (used) New 2022 - used on a Swiss Type CNC sliding headstock lathe. Comes with (2) channel sets., 2022 FMB TURBO 2-20, Capacity. 20 mm, Bar Length. 12'.
FMB #Turbo-3-36, Magazine Bar Loader, w/Integrated FMB/EDGE Bundle Loader, 2017
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-3-36
Year: 2017
Ultimate production / Lights Out Package - (2) Available - FMB Turbo 3-36 Magazine Bar Loader w/Integrated FMB/EDGE Bundle Loader New 2017/2018. 3mm to 36mm x 12' bar capacity. Used on Swiss sliding headstock CNC Lathes. $75K package when new - save money - only a fraction of the new price., 2017 FMB / EDGE ...more
FMB #Turbo-5-42/4200, magazine bar feed, Star SV-32J Swiss type lathe, 2000, #160993
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Fmb
Model: TURBO-5-42/4200
Year: 2000
FMB TURBO 5-42/4200 MAGAZINE BAR FEEDNEW: 2000 PREVIOUSLY CONNECTED TO A STAR SV-32J : Barstock Capacity: 1/8" - 1-5/16" Magazine Capacity: 280mm or (11) 1" Bars Bar Length Capacity: 13'-6" Return Speed: 26" Per Second Insertion Rate: 16" Per Second (Adjustable) Loading Time:″0 ...more
FMB #Turbo-5-42/4200, 12' magazine barfeed, 5-42mm, collets, S/N 37-110-270, #UD1000
Machinery Solutions Inc | Lexington, SC
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Fmb
Model: TURBO-5-42/4200
FMB #Turbo-5-55, barfeed, 39.4" to 12.5'bar length, 11" magazine rack capacity, .196" to 2.165" bar diameter, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Fmb
Model: TURBO-5-55
Year: 2011
FMB Turbo 555 12’ Barfeed (subject to buyer verification):Bar diameter capacity-no bar preparation: 5 mm to 51 mm (.196” to 2.000”)Bar diameter capacity-with bar preparation: 5 mm to 55 mm (.196” to 2.165”)Maximum bar length: 3800 mm (12 feet 5 inches)Minimum bar length: 1000 mm ...more
FMB #Turbo-5-55, Magazine Bar Loader, 2.56" bar
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-5-55
Year: 2018
FMB Turbo 5-55 Magazine Bar Loader (used) Like New - Barely used - Excellent Condition - 5mm to 55mm bar capacity x 12; bar lengths, with 51mm channel set. CAN BE CONVERTED TO 65MM MAX CAPACITY!, 2018 FMB TURBO 5-55, Capacity. 65 mm, Bar Length. 12', Control. CNC.
FMB #Turbo-8-80, magazine bar loader, 3.1496" cap., 12' bar length, 2008
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-8-80
Year: 2008
Brand FMB Model TURBO 8-80 ID # 626435 Type Magazine Type Bar Loaders Condition Used - Good Year 2008 Location United States, FMB Turbo 8-80 Magazine bar loader (used) New 2008 - for 6mm to 80mm x 12" bars. Misc channel sets. Capacity 3.1496" Bar Length 12'.
Grindley, Hydrodynamic Bar Feed System, 1750 RPM, 230/460 V
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Grindley
Inventory No. 1225-079-0006 Manufacturer Grindley Name Hydroynamic Bar Feed System Arrival Date 01-09-2026 Dimensions L x W x H (inches) Unavailable Electrical 3/60/230/460 Weight (lb.) 1125 Category CNC Condition Used Available Quantity 1 Item 1750 Rpm, 27x16x17 Tank, Made In Usa, (120#) 28x18x28, (640#) 217x21x9 ...more
Haas #BAR-48A-Servo-300, bar feed, .375"-3.125"bar capacity, 60" bar length, 2012
Machinery Network Inc | Encino, CA
Category: Bar Feeders and Loaders
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: BAR-48A-SERVO-300
Year: 2012
Bar Cap. 0.375 - 3.125, Max. Bar Length 60, Max. Number of Bars 30 at 1 Diameter, Floor Space 99 x 55 x 54, Machine Weight 1,300 lbs.
Haas #BAR-300, 60" length, 0.25"-3.125" diameter, 2000
FMI Trading LLC | Vinton, TX
Category: Bar Feeders and Loaders
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Haas
Model: BAR-300
Year: 2000
Product Information, CNC Lathes Diameter:0.25" - 3.125" Year:2000 Weight:1,500.00 Dimensions:64" x 96" x 55" ::Length: 60", Product Code: 03040151024 Make: Haas Model: BAR 300 Serial Number: 90255 Condition: Used.
JUST ADDED!
Haas #Bar-300, Servo bar feed, 3.125" dia., 2000
Chrisgo Equipment Co., Inc. | Milford, OH
Category: Bar Feeders and Loaders
Seller: Chrisgo Equipment Co., Inc.
Location: Milford, OH
Mfr: Haas
Model: BAR-300
Year: 2000
Haas #Bar-300, Bar Feeder, 62" capacity, 2008
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Haas
Model: BAR-300
Year: 2008
Inventory No. 1124-036-0154 Manufacturer Haas Model No. BAR 300 Name Bar Feeder Arrival Date 10-28-2025 Dimensions L x W x H (inches) 99 x 64 x 56 Capacity 62" Weight (lb.) 1250 Category CNC Condition Used Available Quantity 1 Serial No. 93100 Make Year 2008.
Haas #Bar-300, Bar Feeder, 62" capacity
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Haas
Model: BAR-300
Inventory No. 1124-036-0152 Manufacturer Haas Model No. SERVOBAR 300 Name Bar Feeder Arrival Date 10-28-2025 Dimensions L x W x H (inches) 102 x 64 x 55 Capacity 62" Weight (lb.) 1330 Category CNC Condition Used Available Quantity 1.
JUST ADDED!
Haas #Servo-300, magazine type bar loader, 3.125" capacity, 48' bar length
Silverlight CNC | Barrington, IL
Category: Bar Feeders and Loaders
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Haas
Model: SERVO-300
Year: 2013
HAAS SERVO 300 magazine type bar loader from 2013. Used condition with 3.125" capacity and 48' bar length. Ideal for enhancing machining efficiency. Quality manufacturing from HAAS ensures performance., 2013 HAAS SERVO 300, Capacity. 3.125", Bar Length. 48'.
JUST ADDED!
Haas #Servo-Bar-300, 2.5" diameter, 60" lgth, 2018
Machinery Marketing International | Chicago, IL
Category: Bar Feeders and Loaders
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: SERVO-BAR-300
Year: 2018
2018 Servo-driven Bar Feeder for Haas CNC Lathes, Transform your manual lathe into a fully automated high-production machine with the Haas Servo Bar 300 Bar Feed. Designed for industries like automotive and aerospace, it enhances high-volume production by automating material feeding. Achieve precise, consistent, and ...more
JUST ADDED!
Haas #Servo-Bar-300, barfeed, 2.5" cap., 60" lgth, 2018
Machine Tool Bids | Chicago, IL
Category: Bar Feeders and Loaders
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Haas
Model: SERVO-BAR-300
Year: 2018
Transform your manual lathe into a fully automated high-production machine with the Haas Servo Bar 300 Bar Feed. Designed for industries like automotive and aerospace, it enhances high-volume production by automating material feeding. Achieve precise, consistent, and efficient bar stock feeding, minimizing operator ...more
Haas #Servo-Bar-300, barfeed, 3/8"-3" diameter, 10"-48" length, chamfer, 2025
CJM Machinery Sales Inc | Zurich, ON
Category: Bar Feeders and Loaders
Seller: CJM Machinery Sales Inc
Location: Zurich, ON
Mfr: Haas
Model: SERVO-BAR-300
Year: 2025
3/8″”- 3″ bar capacity, 48″ max. bar length, 10″ min. bar length. c/w plug and play capabilities, barfeed interface directly to Haas control, built- in bar chamfer device, miscellaneous barfeeder accessories. 2025. As New!.
Haas #Servo-Bar-300, bar feed, up to 60" bar length, 3-1/8" bar diameter, 2009
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: SERVO-BAR-300
Year: 2009
Haas Servo Bar 300 Barfeed, Max Bar Length Up to 60″, Max Number of Bars 30 at 1″ Diameter, Control Haas, Bar Diameter Capacity 3-1/8″, Approximate Machine Dimensions: 99.00″L x 55.00″W x 54.00″H, Approximate Weight: 900.00 lbs., This barfeed is only compatible with a SL30 or TL25.
Haas #Servo-Bar-300, CNC bar feeder, 60" length, .25" - 3.125" bar capacity, 2000
Machnet | Santa Monica, CA
Category: Bar Feeders and Loaders
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: SERVO-BAR-300
Year: 2000
Haas Servo Bar 300, Haas Servo Bar 300 CNC Bar Feeder, New: 2000, Bar Length: 60", Bar Capacity:.25" - 3.125", Dimensions: 104" x 56" x 68".
Haas #Servo-Bar-300, barfeeder, 3-1/8" bar capacity, 60" lgth, 30 max bars @ 1" diameter, 2007
CJM Machinery Sales Inc | Zurich, ON
Category: Bar Feeders and Loaders
Seller: CJM Machinery Sales Inc
Location: Zurich, ON
Mfr: Haas
Model: SERVO-BAR-300
Year: 2007
3 1/8″ bar capacity, 60″ length, max. number of bars is 30 at 1″ dia., brushless type interface cables & alignment plates. 2007..
