1 / 3
Click to zoom in
1 / 3
For Sale by Equipment Hub
Surplus Record Dealer Since 2014
Location: Decatur, GA
Contact Drake Denham
Phone Number: 770...> Show Phone Number 770-621-0495
Let the seller know you found their listing on Surplus Record!
$34,500 USD
Finance for as low as $700/mth 
Description
General Info
Stock #: 131250030
Location: IL
Brand: Omax
Model: 80X
Year: 2008
Loading Fee: Rigging Required
Specifications
Table Size: 89" x 180"
X-Axis Travel: 160"
Y-Axis Travel: 80"
Z-Axis Travel: 8"
Travel Speed: 180 IPM
Water Intensifier Power: 40 HP
Water Intensifier Output: 60,000 PSI
Hours on Pump Since Upgrade: 2,000 Hours
Total Hours on Machine: 8,400 Hours
Equipped With
Omax PC-Based Control w/ Software, Enduromax 40HP Pump upgraded to 60k psi, Motorized Z-Axis
Additional Info
Machine is prepped for shipping and available immediately.
Stock #: 131250030
Location: IL
Brand: Omax
Model: 80X
Year: 2008
Loading Fee: Rigging Required
Specifications
Table Size: 89" x 180"
X-Axis Travel: 160"
Y-Axis Travel: 80"
Z-Axis Travel: 8"
Travel Speed: 180 IPM
Water Intensifier Power: 40 HP
Water Intensifier Output: 60,000 PSI
Hours on Pump Since Upgrade: 2,000 Hours
Total Hours on Machine: 8,400 Hours
Equipped With
Omax PC-Based Control w/ Software, Enduromax 40HP Pump upgraded to 60k psi, Motorized Z-Axis
Additional Info
Machine is prepped for shipping and available immediately.
General Info
- Stock #: 131250030
- Location: IL
- Brand: Omax
- Model: 80X
- Year: 2008
- Loading Fee: Rigging Required
Specifications
- Table Size: 89″ x 180″
- X-Axis Travel: 160″
- Y-Axis Travel: 80″
- Z-Axis Travel: 8″
- Travel Speed: 180 IPM
- Water Intensifier Power: 40 HP
- Water Intensifier Output: 60,000 PSI
- Hours on Pump Since Upgrade: 2,000 Hours
- Total Hours on Machine: 8,400 Hours
Inquire Further with Equipment Hub!
Buyers Who Viewed This Listing Also Viewed:
Omax #80X, waterjet cutting, 6' 8" x 13' 4" capacity, 50 HP Enduromax pump
Category: Waterjet Cutters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Omax
Model: -80X
X-Y Cutting Envelope *** 13' 4" x 6' 8" Table Size – (L x W) 15' 0" x 7' 5" Maximum JetPower* 42.5 hp Output Pressure 55,000 P.S.I. Orifice & Flow Rate ** 0.016" / 1.20 gpm Z-Axis Travel *** 8" Speed 180 in/min Linear Positional Accuracy ±0.0010" Repeatability ±0.0010" Ballbar Circularity ±0.0030" Motor Power ...more
JUST ADDED!
Omax #Maxiem-2040, waterjet, 6.5' x 13.1' table, 40 HP, 50,000 PSI., Omax control, 500 IPM cutting speed, 2013
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 2040
Year: 2013
Used Omax Maxiem 2040 (2013) Waterjet for Sale. This machine has a 6.5′ wide by 13.1′ long table, Omax Control, and a 40 HP pump rated to a maximum cutting pressure of 50,000 PSI. Cutting speed is 500 IPM, with linear accuracy of +/- 0.0030″, repeatability of +/- 0.0010″, and ballbar ...more
JUST ADDED!
Omax #Maxiem-1530, waterjet cutting system, 10' x 5' table, 40 HP, 50,000 PSI, Intellimax PC control, 2013
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Omax
Model: MAXIEM 1530
Year: 2013
10’ X 5’ Waterjet Cutting System with Omax Intellimax PC Based Control, MAXJET 5i Nozzle with Fusible Mixing Tube (0.0015”) Maxiem A - Jet Terrain Follower, Variable Speed Solids Removal System, Transducer, Sand Hopper and Bulk Pot., X - Axis: 120.51”, Y - Axis: 62.008”, Z - Axis: ...more
JUST ADDED!
Omax Maxiem #1530, Omax Intellimax PC based Control with Intelli-MAX software, 40 HP, 146" X, 68" Y, 12" Z, 2013
Category: Waterjet Cutters
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Omax
Model: 1530
Year: 2013
VERY LOW HOUR MACHINE!!!, Omax Maxiem 1530, New 2013, Hours 589, Omax Maxiem 1530 :, X-Axis146, Y-Axis68, Z-Axis12, Cutting Travels:, X-Axis120, Y-Axis62, Speed500 IPM, Repeatability0.001, Accuracy0.003, Material Supports Slats Size4 x 14Ga Galvanized Steel, Slat Bed Material Load Maximum300 Lbs./SF, Pump:, TypeDual ...more
JUST ADDED!
Omax #60120, 60" x 120" CNC Waterjet Cutter w/ 40 HP Enduromax Pump, Tilt-a-jet, 2010
Category: Waterjet Cutters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Omax
Model: 60120
Year: 2010
SKU: 155691, Model: 60120, Year: 2010, Condition: Used, S/N: H511630, Table Size: 60" x 120", Hours: 5705, Dimensions: 110.00 (H) x 120.00 (W) x 290.00 (L) inches, Additional :, Tilt compensation: Tilt-A-Jet, Pump: 40 HP EnduroMAX pump, Pump output: 60,000 PSI // 4136.8 bar, X-axis travel: 126" // 3200 ...more
