1 - 50 of 72 listings
Omax #80X, CNC waterjet, 89" x 180" table, 160" X, 80" Y, 8" Z, 40 HP, 60000 psi, 2008
Equipment Hub | Decatur, GA
Category: Waterjet Cutters
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Omax
Model: -80X
Year: 2008
Stock #: 131250030, Location: IL, Brand: Omax, Model: 80X, Year: 2008, Loading Fee: Rigging Required, Table Size: 89" x 180", X-Axis Travel: 160", Y-Axis Travel: 80", Z-Axis Travel: 8", Travel Speed: 180 IPM, Water Intensifier Power: 40 HP, Water Intensifier Output: 60,000 PSI, Hours on Pump Since ...more
Omax #80X, waterjet cutting, 6' 8" x 13' 4" capacity, 50 HP Enduromax pump
Sterling Machinery Exchange | South El Monte, CA
Category: Waterjet Cutters
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Omax
Model: -80X
X-Y Cutting Envelope *** 13' 4" x 6' 8" Table Size – (L x W) 15' 0" x 7' 5" Maximum JetPower* 42.5 hp Output Pressure 55,000 P.S.I. Orifice & Flow Rate ** 0.016" / 1.20 gpm Z-Axis Travel *** 8" Speed 180 in/min Linear Positional Accuracy ±0.0010" Repeatability ±0.0010" Ballbar Circularity ±0.0030" Motor Power ...more
Omax #80X, 80" x165" table, 60000 psi, 50 HP, closed loop system, terrain follower, 600 lb. abrasive system, #32724
Prestige Equipment Corp | Melville, NY
Category: Waterjet Cutters
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Omax
Model: -80X ENDUROMAX
CAPACITY:, Output: 60,000 PSI, Motor Size: 50 HP, X-Axis Travel: 165", Y-Axis Travel: 80", Z-Axis Travel: 6", Table Size: 80" x 165", Speed: 180" IPM, Omax PC Based CNC Control, 50 HP Enduromax 5060V Pump, Koolant Kooler Chiller, Closed Loop Water Recycling System, 600 LB Capacity Clemco Abrasive Tank, Terrain ...more
Omax #120X-1, CNC Water Jet, 339" x 137" Table, 320" X, 120" Y, 8" Z, 350 IPM, 60000 psi, 30 HP Pump, 100 hours, 2024
Prestige Equipment Corp | Melville, NY
Category: Waterjet Cutters
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Omax
Model: 120X-1
Year: 2024
, Omax PC Based CNC Control, EnduroMAX 30 HP Pump, AJet Cutting Head, Rotary Axis, Nano Filtration System, Chiller, HOURS:, 100, NOTE:, Inspect In Plant Under Power, s:, Omax PC Based CNC Control, EnduroMAX 30 HP Pump, AJet Cutting Head, Rotary Axis, Nano Filtration System, Chiller, CAPACITY, Output: 60,000 PSI, Motor ...more
Omax Maxiem #1515-4, Head Waterjet Cutting System, 62" x 62" table, 50 HP, 60000 PSI, 480 V., 2021
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Omax
Model: 1515-4
Year: 2021
5’ X 5’ Waterjet Cutting Machine with PC Based Control, (4) Cutting Heads on Combined X / Y / Z Axes, Enduromax Pump, Abrasive Hopper and Washdown Hose., Table Width: 5’ 2”, Table Length: 5’ 2”, Max. Part Height: 12”, Pump HP Rating: 50 HP, Max. Output Pressure: 60,000 PSI ...more
Get email updates for newly added Waterjet Cutters
Waterjet Cutters (also known as water jet cutting machines) use high-pressure streams of water, often mixed with abrasives, to cut through materials like metal, stone, and glass. Commonly used in industries such as aerospace, automotive, and manufacturing, waterjet cutters provide precise, clean cuts without generating heat. They are ideal for materials that are sensitive to high temperatures or require intricate cutting.
JUST ADDED!
Omax #1530, CNC Waterjet, 40 HP, 50,000 Psi, 5' x10', 2011
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Omax
Model: 1530
Year: 2011
Make: Omax, Model: 1530, Year: 2011, Machine Location: California, 5′ x 10′, 50000 psi, 40 hp pump, currently running 60 grit with no issues..
Omax Maxiem #1530, Omax Intellimax PC based Control with Intelli-MAX software, 40 HP, 146" X, 68" Y, 12" Z, 2013
Liberty Machine Works | Preston, ID
Category: Waterjet Cutters
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Omax
Model: 1530
Year: 2013
VERY LOW HOUR MACHINE!!!, Omax Maxiem 1530, New 2013, Hours 589, Omax Maxiem 1530 :, X-Axis146, Y-Axis68, Z-Axis12, Cutting Travels:, X-Axis120, Y-Axis62, Speed500 IPM, Repeatability0.001, Accuracy0.003, Material Supports Slats Size4 x 14Ga Galvanized Steel, Slat Bed Material Load Maximum300 Lbs./SF, Pump:, TypeDual ...more
Omax #Maxiem-1530, CNC waterjet cutting system, 10' x 5' 2" cutting envelope, 12" Z, 50000 PSI, Intelli-MAX CAD/CAM, chiller, under 5 pump hours, 2024
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Omax
Model: 1530
Year: 2024
Make: Omax - Maxiem, Model: 1530, Year: 2024, Machine Location: Upon Request, This 2024 OMAX Maxiem 1530 is a precision abrasive waterjet cutting system offering a 5′ x 10′ cutting envelope, making it an ideal solution for job shops, fabricators, and manufacturers requiring versatile, high-accuracy cutting ...more
Omax #2626, waterjet cutters, 26" x 26" cutting area, 40000 psi pump pressure, 20 HP, hopper, 2002
Machnet | Santa Monica, CA
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Omax
Model: 2626
Year: 2002
Omax 2626 Waterjet Cutting System - Super Clean, Tons of Options!, Omax 2626 Waterjet Machining System, New: 2002, Cutting Area: 26 x 26, Pump Pressure: 40,000 PSI, Pump Motor: 20 HP, Omax Windows-based control, Bulk Abrasive Delivery System, Hopper, Approximately 1300 hours, Pallet of new garnet, Miscellaneous spare ...more
Omax #2626 Jet Machining center, 46" x 31" table, 26" X, 26" Y, 8" Z, 30 HP, 60000 psi, 2018
Liberty Machinery Co | Lincolnshire, IL
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: 2626
Year: 2018
New - 2018, Runtime - 11,258 Hours, CATALOG :, Table size.46" x 31", Cutting envelope.26" x 26", Material:, - Load - maximum.400 Lbs./Sq. Ft., - Support slats.4" x 1/8", Travels:, - X-Axis.26", - Y-Axis.26", - Z-Axis.8", Speed.180 IPM, Accuracy:, - Linear positional.+/-0.001", - Repeatability.+/-0.001", - Ballbar ...more
JUST ADDED!
Omax #2652, waterjet, 5' 9" x 2' 6" table, 12' 1" x 6' 3" footprint, refurbished 2021
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: 2652
Footprint (with pump) 12' 1" x 6' 3", Height (with scissor plumbing) 8', Operating Weight 10,252 lb, Weight (tank empty) 4,300 lb, X-Y Cutting Travel* 4' 4" x 2'2", Z-Axis Travel (with Motorized Z Axis)* 8", Table Size 5' 9" x 2' 6".
Omax #55100, CNC Waterjet, 55" x 100" max cutting size, 10' 6" x 5' 5" water tank, 30 HP, 2005
Equilibrium Machinery | Waukesha, WI
Category: Waterjet Cutters
Seller: Equilibrium Machinery
Location: Waukesha, WI
Mfr: Omax
Model: 55100
Year: 2005
2003 Omax 55100 CNC Water Jet, Maximum Cut Size 55” X 100”, Overall Size of Water Tank 10’6” x 5’5”, Z-Axis Travel 8”, Intensifier HP 30, Intensifier PSI 50,000, Speed 180 IPM, Accuracy/Repeatability +/- 0.001, Approximate Footprint (w/Controller) 12’11” x ...more
Omax #55100, 4' x 8' Waterjet, 30 HP vari-frequency drive pump, water level Control, 2005
Zimmerman-McDonald Machinery Inc | Saint Louis, MO
Category: Waterjet Cutters
Seller: Zimmerman-McDonald Machinery Inc
Location: St. Louis, MO
Mfr: Omax
Model: 55100
Year: 2005
Used OMAX Model 55100 Precision WaterJet, With Omax 30 HP Variable Frequency Drive Pump, Manufactured - 2005, Approx 6,000 Hours, Serial #B511912, MACHINE CONFIGURATION, Table Size: 65” W x 126” L, Cutting Capacity: 55” x 100”, Table Weight Capacity: 175 Lbs/Sq Ft, Machine Slat Height: ...more
Omax #55100, CNC waterjet cutting system, 5.4' x 10.5' table, 30 HP pump, 50,000 PSI, Omax CNC Control, 2006
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 55100
Year: 2006
Used Omax 55100 (2006) Waterjet for Sale. This abrasive waterjet has a 55″ wide by 100″ long table and runs on the Omax CNC control. The 30 HP pump supports a maximum cutting pressure of 50,000 PSI. abrasive hopper software, Tilt-A-Jet and a Maxjet 5 nozzle. The machine can be seen under power, and ...more
Omax #55100, CNC waterjet, 4.5' x 8.3', 30 HP, 60000 psi, garnett hopper, chiller, height sensor, 2021
Equipment Hub | Decatur, GA
Category: Waterjet Cutters
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Omax
Model: 55100
Year: 2021
Stock #: 112250031, Location: Decatur, GA, Brand: Omax, Model: 55100, Serial #: B512656, Year: 2021, Approx. Shipping Weight: 8,000 Lbs., Approx. Shipping Dimensions: 20' L x 8' W x 8' H, Skidding Fee: Skidding Unavailable, Table Width: 4.5', Table Length: 8.3', Pump: 30 HP, Max Cutting Pressure: ...more
Omax #55100, Water Jet Machining Center, 126" x 65" table, 180 inches/minute, 480 Volts, 3PH, 2012
Lenmark Industries | Langley, BC
Category: Waterjet Cutters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Omax
Model: 55100
Year: 2012
SKU: 151792, Model: 55100, Year: 2012, Condition: Used, S/N: B512174, Table Size: 126"x65", Hours: 5512, Electrical :, Voltage: 480 volts, Phase: 3-phase, Dimensions: 120.00 (H) x 105.00 (W) x 181.00 (L) inches, Additional :, Material support slats: 4" x 1/8" // 102 mm x 3.2 mm galvanized steel ...more
Omax #55100, CNC waterjet, 60000 psi, 100" X, 55" Y, 8" Z, 65" x 126" table, 2018
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: 55100
Year: 2018
2018 OMAX 55100, Pump PSI. 60,000 PSI, X-Axis. 100", Y-Axis. 55", Z-Axis. 8", Accuracy. 0.0010", Repeatability. 0.0010", Table Size-W. 65", Table Size-L. 126", Cut Speed. 180 ipm, Dimensions. 12'11" x 7'10" x 9'10" H, Weight. 8,000 Lbs w/ Empty Tank, OMAX 3050V Pump, Motorized Z-Axis, 600 Lbs Abrasive ...more
Omax #55100, Waterjet Cutting System, 8' 4" x 4' 7" table, 2021
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Omax
Model: 55100
Year: 2021
8’ 4” X 4’ 7” Waterjet Cutting System with Omax CNC Control, Garnet Recovery System, Water Filtration System, Model AIR 2000-Omax Chiller and Roura Hopper Skid of Class 80 Garnet., X & Y Cutting Travels: 100” X 55”, Z - Axis Travel: 8”, Tank Size: 10’ 6” X ...more
Omax #55100, CNC Waterjet, 126" X, 60" Y, 32" Z, Omax Control Center, Pump Unit, 110 Vac
HGR24 | Euclid, OH
Category: Waterjet Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Omax
Model: 55100
15 A, 110 VAC, OMAX CONTROL CENTER, PUMP UNIT (1425#) 71X38X38, (9660#) 192X100X84, *CONTAINS 2 PIECES.
JUST ADDED!
OMAX #5555, waterjet, 55" x 55" cutting capacity, 65" x 80" table, EnduroMax 5060 50 HP VFD pump, Tilt-A-Jet head, 600 lb. hopper, 8,800 hours, 2013
Kaste Industrial Machine Sale | Enfield, CT
Category: Waterjet Cutters
Seller: Kaste Industrial Machine Sale
Location: Enfield, CT
Mfr: Omax
Model: 5555
Year: 2013
MACHINE CONFIGURATION:, Table Size: 65"W x 80"L, Cutting Capacity: 55" x 55", Table Weight Capacity: 250 lbs./Sq Ft, Machine Slat Height: 4", Machine Weight Empty: 6300 lbs., Operating Weight: 13,000 lbs., Machine Height: 118", NOZZLE CONFIGURATION:, Jewel:.014" -.016" Orifice, Mixing Tube:.030" -.042" Carbide ...more
JUST ADDED!
Omax #5555, precision waterjet, 50 HP, 4' x 4' table, 2013
Zimmerman-McDonald Machinery Inc | Saint Louis, MO
Category: Waterjet Cutters
Seller: Zimmerman-McDonald Machinery Inc
Location: Saint Louis, MO
Mfr: Omax
Model: 5555
Year: 2013
Used OMAX Model 5555 Precision WaterJet, With Omax 50 HP Variable Frequency Drive Pump, Manufactured - 2013, Approximate Hours 8,800, MACHINE CONFIGURATION, Table Size: 65” W x 80” L, Cutting Capacity: 55” x 55”, Table Weight Capacity: 250 Lbs/Sq Ft, Machine Slat Height: 4”, Machine ...more
JUST ADDED!
Omax #5555, Waterjet Cutting System, 4' 7" x 4' 7", 55" x55", IntelliMAX cnc, 2018
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Omax
Model: 5555
Year: 2018
Make: Omax, Model: 5555, Year: 2018, Machine Location: Upon Request, – 4’ 7” x 4’ 7” (1,397 mm x 1,397 mm) X-Y cutting area, – OMAX MAXJET® 5i Nozzle for more accurate and consistent jet, – 40 hp Enduromax 60kpsi Pump, the following Options:, 1) Drill Head, 2) Terrain ...more
Omax #60120, waterjet, 30 HP, 50000 psi, Tilt-A-Jet, 5' x 10', 2008
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: 60120
Year: 2008
5' X 10' OMAX MODEL 60120 WATERJET, NEW 2008, Pump Output 50,000 PSI X-Axis Travel 120 " Y-Axis Travel 60 " Z-Axis Travel 5.6 " Table Size-W 110 " Table Size-L 225 " Power 30 hp Weight 23,200 operating weight Control CNC (Windows (Omax software updated to Version 30)) 2008 Omax 60120 Waterjet Machine:, Model: ...more
Omax #60120, CNC waterjet cutting system, 6.42' x 10.5' table, 40 HP pump, 55,000 PSI, reconditioned, Omax Control, 2008
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 60120
Year: 2008
Used Omax 60120 (2008) Waterjet for Sale. This machine has a 6.42′ wide by 10.5′ long table, an Omax control, and a 40 HP pump with a maximum cutting pressure of 55,000 PSI. It is a reconditioned/refurbished machine the pump was rebuilt and inspected, and the machine was newly painted. a charge pump, laser ...more
JUST ADDED!
OMAX #60120, abrasive waterjet, 77" x 144" table, 62" x 126" cutting capacity, EnduroMax 40 HP pump, 55,000 psi, Tilt-A-Jet head, 2009
Kaste Industrial Machine Sale | Enfield, CT
Category: Waterjet Cutters
Seller: Kaste Industrial Machine Sale
Location: Enfield, CT
Mfr: Omax
Model: 60120
Year: 2009
, Table Size: 77" x 144", Cutting Capacity: 62" x 126", Parking Area for Carriage for Easy Loading from Front, Side, or Top of Table, Table Support Load: 400 lbs Sqr/Ft, Material Support Slats: 4" x 1/8" Galvanized, Drive System: Closed Loop Vector Linear Drive System, OMAX EnduroMax Pump Horsepower: 40 HP 3/60/460 ...more
Omax #60120, 60" x 120" CNC Waterjet Cutter w/ 40 HP Enduromax Pump, Tilt-a-jet, 2010
Lenmark Industries | Langley, BC
Category: Waterjet Cutters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Omax
Model: 60120
Year: 2010
SKU: 155691, Model: 60120, Year: 2010, Condition: Used, S/N: H511630, Table Size: 60" x 120", Hours: 5705, Dimensions: 110.00 (H) x 120.00 (W) x 290.00 (L) inches, Additional :, Tilt compensation: Tilt-A-Jet, Pump: 40 HP EnduroMAX pump, Pump output: 60,000 PSI // 4136.8 bar, X-axis travel: 126" // 3200 ...more
Omax #60120, with A-Jet 5-Axis head waterjet, 40 HP, 60000 psi, refurbished 2025, 2013
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: 60120
Year: 2013
2013 OMAX 60120, Pump PSI. 60,000 PSI, X-Axis. 3,200 mm, Y-Axis. 1,575 mm, Z-Axis. 8", Table Size-W. 1,956 mm, Table Size-L. 3,656 mm, Power. 100 hp, A-JET 5-AXIS HEAD, ENDUROMAX 40 HP 60,000 PSI PUMP, 2960 HOURS, INSTALLATION INCLUDED.
JUST ADDED!
Omax #60120, precision abrasive waterjet, 5' x 10' table, 55000 psi, 40 HP, 2016
Zimmerman-McDonald Machinery Inc | Saint Louis, MO
Category: Waterjet Cutters
Seller: Zimmerman-McDonald Machinery Inc
Location: Saint Louis, MO
Mfr: Omax
Model: 60120
Year: 2009
OMAX Model 60120 5’ x 10’ Precision Abrasive Waterjet, Manufactured 2009, Table Size: 77” x 144”, Cutting Capacity: 62” x 126”, Parking Area for Carriage for Easy Loading from Front, Side, or Top of Table, Table Support Load: 400 Lbs Sqr/Ft, Material Support Slats: 4” x ...more
Omax #60120, CNC waterjet cutting system, 6.5' x 12' table, 40 HP pump, 60,000 PSI, Omax PC Control, 2019
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 60120
Year: 2019
Used Omax 60120 (2019) CNC Waterjet for Sale. This pre-owned Omax CNC waterjet is located in The United States. If you have any questions regarding this Omax Waterjet, please feel free to contact us., Table Width6.5' Table Length12' ControlOmax PC Pump40 HP Max Cutting Pressure60,000 PSI Power ...more
JUST ADDED!
OMAX #60120, abrasive waterjet, 77" x 144" table, 62" x 126" cutting capacity, EnduroMax 5060V 50 HP pump, 60,000 psi, 2016
Kaste Industrial Machine Sale | Enfield, CT
Category: Waterjet Cutters
Seller: Kaste Industrial Machine Sale
Location: Enfield, CT
Mfr: Omax
Model: 60120
Year: 2016
, Table Size: 77" x 144", Cutting Capacity: 62" x 126", Parking Area for Carriage for Easy Loading from Front, Side, or Top of Table, Table Support Load: 400 lbs Sqr/Ft, Material Support Slats: 4" x 1/8" Galvanized, Drive System: Closed Loop Vector Linear Drive System, OMAX EnduroMax Pump Horsepower: 50 HP 3/60/460 ...more
JUST ADDED!
Omax #60120, precision abrasive waterjet, 5' x 10' table, 60000 psi, 50 HP, 2016
Zimmerman-McDonald Machinery Inc | Saint Louis, MO
Category: Waterjet Cutters
Seller: Zimmerman-McDonald Machinery Inc
Location: Saint Louis, MO
Mfr: Omax
Model: 60120
Year: 2016
OMAX Model 60120 5’ x 10’ Precision Abrasive Waterjet, Manufactured 2016, Table Size: 77” x 144”, Cutting Capacity: 62” x 126”, Parking Area for Carriage for Easy Loading from Front, Side, or Top of Table, Table Support Load: 400 Lbs Sqr/Ft, Material Support Slats: 4” x ...more
Omax #60120, CNC waterjet cutting system, 6.42' x 10.5' table, 50 HP pump, 60,000 PSI, Intellimax Control, 2016
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 60120
Year: 2016
Used Omax 60120 (2016) Waterjet for Sale. This machine offers a 6.42′ wide by 10.5′ long table, Intellimax control, and a P5060V 50 HP 60,000 PSI Enduromax pump for a maximum cutting pressure of 60,000 PSI. It is a 600 lb hopper, the Omax Gold Package, a collision sensing terrain follower, a Tilt-A-Jet ...more
Omax #80160, JetMachining Waterjet Cutter, 80" x 160" cutting area, 50 HP pump, solids removal system & A-Jet 200 liter abrasive delivery, 2012
Lenmark Industries | Langley, BC
Category: Waterjet Cutters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Omax
Model: 80160
Year: 2012
SKU: 157029, Model: 80160, Year: 2012, Condition: Used, S/N: E511774, Dimensions: 144.00 (H) x 134.00 (W) x 288.00 (L) inches, Additional :, Purchased date: September 2012, Pump horsepower: 50 HP, Cutting Area: 80" x 160", Options Included: SRS (Solids Removal System), A-Jet 200 Liter Bulk Abrasive Delivery ...more
Omax #80160, Water Jet, 7' x14' table, 60000 psi, 5100 hours, 2024
Smith Machinery Co | Ames, IA
Category: Waterjet Cutters
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Omax
Model: 80160
Year: 2024
460V 3 PHASE., Pump PSI 60,000, X – Axis 160”, Y – Axis 80”, Z – Axis 8”, Table Size Width 88”, Table Size Length 175”, Overall Dimensions 243”x134”, Machine Length 20’3” x Width, 11’ 5” x Height 8’ 6”, Pump ...more
Omax #80X, waterjet, 6.8' x 13.4' table, 50 HP, 60,000 PSI., Omax Intelli-MAX control, 2019
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 80X
Year: 2019
Used Omax 80X (2019) Waterjet for Sale. This machine offers a 6.8′ x 13.4′ cutting table with the Omax Intelli-MAX control and Intelli-MAX software. It runs a 50 HP Enduromax pump with a maximum cutting pressure of 60,000 PSI and approximately 5000 hours on the pump. Motion is handled by an Intelli-Trax ...more
Omax #80X, CNC water jet, 2019
Bay Area CNC Machinery | Walnut Creek, CA
Category: Waterjet Cutters
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Omax
Model: 80X
Year: 2019
Manufacturer Omax, Model 80X, Year 2019, Condition Used.
JUST ADDED!
Omax #80X, CNC Waterjet Cutting System, Intelli-TRAX drive, EnduroMax pump, Omax Precision Velocity control
Meadoworks LLC | Schaumburg, IL
Category: Waterjet Cutters
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Omax
Model: 80X
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located..
Omax #80X, CNC Waterjet Cutting System, 13' 4" x6' 8" cut area, 15' x7' 5" table
Aaron Equipment Co | Schaumburg, IL
Category: Waterjet Cutters
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Omax
Model: 80X
used- omax precision waterjet cutting system, model 80x. cutting area 13' 4'' long x 6' 8'' wide. table size 15' long x 7' 5'' wide. speeds up to 180" min. repeatability within 0.001''. includes garner sand tank and control cabinet. serial # k511537.
Omax #Enduromax-3060V, intensifier pump, 30 HP, 60000 psi, 0.67 GPM
Liberty Machinery Co | Lincolnshire, IL
Category: Waterjet Cutters
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Omax
Model: ENDUROMAX-3060V
"The 4th Generation Omax EnduroMAX Pump is the industry leader in efficiency reliable direct drive pump technology. Designed for long life, the EnduroMAX Pump is capable of up to 1,000 hours between pump rebuilds, maximizing machine uptime. The simple yet robust design is specifically engineered to simplify ...more
Omax #Global-Max-1508, 2.1' x 55' table, 5" Z-Axis, 30 HP, air & water conditioning kit, 2021
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: GLOBAL-MAX-1508
Year: 2021
2021 OMAX GLOBAL MAX 1508, Z-Axis. 5", Table Size-W. 2.1', Table Size-L. 5.5', Power. 30 hp, Global Max 30 HP Pump, Maxpro Nozzle Assembly, Motorized Z, Hopper, AIR & Water Conditioning Kit, Waterproof Keyboard & Mouse, Air & Water Spray Down Package, Air Manifold Distribution Kit, Tool Chest.
Omax #Maxiem-1515, CNC waterjet cutting system, 5.2' x 5.2' table, 30 HP pump, 55,000 PSI, Omax Control, 2016
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1515
Year: 2016
Used Omax Maxiem 1515 (2016) Waterjet for Sale. This machine has a 5.2′ x 5.2′ table with 12″ of Z-axis travel and runs on the Omax control, with a control station and cabinet housing the PC for operator interface. It is a 30 HP Enduromax pump rated to a maximum cutting pressure of 55,000 PSI ...more
Omax #Maxiem-1515, waterjet, 5.2' x 5.2' table, 50 HP, 60,000 PSI., Omax CNC control, 2021
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1515
Year: 2022
Used Omax Maxiem 1515 (2022) Waterjet for Sale. This machine has a 5.2′ x 5.2′ table, an Omax CNC control, and a 50 HP Enduromax pump rated to a maximum cutting pressure of 60,000 PSI. It is a 4-headed spreader bar, abrasive hopper, motorized Z-axis, and Omax Premium Software. Overall dimensions are ...more
Omax #Maxiem-1530, CNC waterjet cutting system, 5.2' x 10.1' table, 20 HP pump, 50,000 PSI, Intelli-Max Control, 2013
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1530
Year: 2013
Used Omax Maxiem 1530 (2013) CNC Waterjet for Sale. This pre-owned Omax CNC waterjet is located in North Carolina. If you have any questions regarding this Omax Waterjet, please feel free to contact us. /p>, Table Width5.2' Table Length10.1' Cutting Envelope5.2' x 10.1' ControlIntelli-Max Pump20 HP Max ...more
Omax #Maxiem-1530, CNC waterjet cutting system, 5.1' x 10.1' table, 30 HP pump, 50,000 PSI, Intellimax Control, 2010
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1530
Year: 2010
Used Omax Maxiem 1530 (2010) Waterjet for Sale. This machine has a 5.1′ x 10.1′ table and runs on Intellimax control with a Windows PC and Intellimax software. The M30 direct drive pump is rated at 30 HP, with a maximum cutting pressure of 50,000 PSI, and measures 52.5″ x 31″ x 42″. a 600 ...more
Omax #Maxiem-1530, waterjet, 5.2' x 10' table, 30 HP, 60,000 PSI., Intelli-Max control, 877 hours, 2023
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1530
Year: 2023
Used Omax Maxiem 1530 (2023) Waterjet for Sale. This machine has a 5.2′ x 10′ table, Intelli-Max control, a 30 HP pump, and a maximum cutting pressure of 60,000 PSI, running on 460/3/60 power. It shows 877 hours, occupies a 14′ x 10′ footprint, and weighs 5,000 lbs. (1) pallet of abrasive ...more
Omax #Maxiem-1530, CNC waterjet cutting system, 5.2' x 10' table, 30 HP pump, 50,000 PSI, Intelli-Max Control, 2024
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1530
Year: 2024
Used Omax Maxiem 1530 (2024) CNC Waterjet for Sale. This pre-owned Omax CNC waterjet is located in The United States. If you have any questions regarding this Omax Waterjet, please feel free to contact us., Table Width5.2' Table Length10' ControlIntelli-Max Pump30 HP Max Cutting Pressure50,000 PSI Power ...more
Omax #Maxiem-1530, CNC waterjet cutting system, 5.2' x 10' table, 40 HP pump, 50,000 PSI, Omax Control, 2010
KD Machinery | Scottsdale, AZ
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: MAXIEM 1530
Year: 2010
Used Omax Maxiem 1530 (2010) CNC Waterjet for Sale. This pre-owned Omax CNC waterjet is located in Canada. If you have any questions regarding this Omax Waterjet, please feel free to contact us., Table Width5.2' Table Length10' ControlOmax Control Pump40 HP Max Cutting Pressure50,000 PSI X-Axis Travel122" ...more
Omax #Maxiem-1530, waterjet cutting system, 10' x 5' table, 40 HP, 50,000 PSI, Intellimax PC control, 2013
Southern Fabricating Mchy Sales | Lithia, FL
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Omax
Model: MAXIEM 1530
Year: 2013
10’ X 5’ Waterjet Cutting System with Omax Intellimax PC Based Control, MAXJET 5i Nozzle with Fusible Mixing Tube (0.0015”) Maxiem A - Jet Terrain Follower, Variable Speed Solids Removal System, Transducer, Sand Hopper and Bulk Pot., X - Axis: 120.51”, Y - Axis: 62.008”, Z - Axis: ...more
JUST ADDED!
Omax #Maxiem-1530, waterjet, 5' x 10', 120" X, 62" Y, 12" Z, 40 HP pump, 50,000 PSI, 500 IPM, 480 V., AIO controller, IntelliMax software, 2023
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Omax
Model: MAXIEM 1530
Year: 2023
Make: Omax, Model: Maxien 1530, Year: 2023, Machine Location: Upon Request, PSI: 50,000, Pump Horsepower: 40 HP, Working Envelope: 120″ x 62″, X-Axis Travel: 120″, Y-Axis Travel: 62″, Z-Axis Travel: 12″, Rapid Traverse Speed: 500 IPM, Linear Positional Accuracy: ±0.003″ ...more
Omax #Maxiem-2040, Waterjet, 16' 1" x 7' 0" table, 50,000 PSI, 25 HP, Omax PC Controller, 2011
Revelation Machinery | Chicago, IL
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Omax
Model: MAXIEM 2040
Year: 2011
Make: Omax, Model: Maxiem 2040, Year: 2011, Machine Location: Iowa, X-Axis Travel: 13′ 10″, Y-Axis Travel: 6′ 7″, Z-Axis Travel: 12″, Table Size: 16’1″ x 7’0″, Cutting Speed: 500 IPM, Linear Accuracy: +/- 0.0030″, Repeatability: +/- 0.0010″, Ballbar ...more
