1 / 5
Click to zoom in
1 / 5
For Sale by Sterling Machinery Exchange
Surplus Record Dealer Since 1970
Location: South El Monte, CA
Contact Adam Mattes
Phone Number: 626...> Show Phone Number 626-444-0311
Let the seller know you found their listing on Surplus Record!
$255,000 USD
Description
DETAILED SPECIFICATION
| X-Y Cutting Envelope *** | 13' 4" x 6' 8" |
| Table Size – (L x W) | 15' 0" x 7' 5" |
| Maximum JetPower* | 42.5 hp |
| Output Pressure | 55,000 P.S.I. |
| Orifice & Flow Rate ** | 0.016" / 1.20 gpm |
| Z-Axis Travel *** | 8" |
| Speed | 180 in/min |
| Linear Positional Accuracy | ±0.0010" |
| Repeatability | ±0.0010" |
| Ballbar Circularity | ±0.0030" |
| Motor Power | 50 HP |
| WEIGHT | 9,000 Lbs. |
| Dimensions (L x W x H) | 22'1" x 12'8" x 12' |
Features
600 Lb. Hopper
50 H.P. EnduroMAX Pump
Tilt-A-Jet Option Included.....Original Cost $41,500
Garnet Removal System
ONLY 1,200 HOURS!
Inquire Further with Sterling Machinery Exchange!
Buyers Who Viewed This Listing Also Viewed:
Omax #80X, CNC waterjet, 89" x 180" table, 160" X, 80" Y, 8" Z, 40 HP, 60000 psi, 2008
Category: Waterjet Cutters
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Omax
Model: -80X
Year: 2008
Stock #: 131250030, Location: IL, Brand: Omax, Model: 80X, Year: 2008, Loading Fee: Rigging Required, Table Size: 89" x 180", X-Axis Travel: 160", Y-Axis Travel: 80", Z-Axis Travel: 8", Travel Speed: 180 IPM, Water Intensifier Power: 40 HP, Water Intensifier Output: 60,000 PSI, Hours on Pump Since ...more
JUST ADDED!
Flow #Mach-4020B, CNC waterjet cutting system, 6.6' x 13' table, 75000 psi, 50 HP intensifier pump, abrasive hopper, 2014
Category: Waterjet Cutters
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Flow
Model: MACH-4020B
Year: 2014
6.6' x 13'50 HP75,000 PSI460V, 3 Phase, 60Hz.
JUST ADDED!
KMT #SLVI-50, Waterjet Intensifier Pump, 50 HP, 60,000 PSI, 480V., 3 Ph., ~500 Hours, 2018, N
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Kmt
Model: SLVI-50
Year: 2018
Make: KMT, Model: SLVI-50, Year: 2018, Machine Location: Texas, 50 HP, 60,000 PSI, 480 V / 3 Phase / 60 Hz, Full Load Amp: 65, Hours: ~500.
Flow #Mach-3-7320B, CNC waterjet cutting system, 6.6'x24'tbl., 50 HP, 94k psi, Ebbco chiller, Flow Hyperjet intensifier pump, 2016
Category: Waterjet Cutters
Seller: Machnet
Location: Santa Monica, CA
Mfr: Flow
Model: MACH-3-7320B
Year: 2016
Flow 6'6" x 24' Waterjet, 50HP 94K PSI, Dynamic, Ebbco Chiller & More, Flow Mach 3 7320b CNC Waterjet Cutting System, New: 2016, Table Width 6.6', Table Length 24', Control Flowmaster Suite, Pump 50 HP, Max Cutting Pressure 94,000 PSI, Power Requirement 460-480/3/60, Flow Hyperjet Intensifier Pump ...more
Flow #Mach-2-2031B, CNC waterjet cutting machine, Flowmaster PC Control, 50 HP, 60000 psi, 2015
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-2-2031B
Year: 2015
2015 FLOW MACH 2-2031B, Pump PSI. 60,000 PSI, Table Size-W. 6.6', Table Size-L. 10', Power. 50 hp, Flowmaster PC CNC Control, 766 hours on old soft start box, Recently replaced soft start box with 0 hrs, Extra new intensifier, Intensifier recently rebuilt, Water softener with a skid of salt pellets, Water ...more
