1 / 5
Click to zoom in
1 / 5
For Sale by Aucto
Surplus Record Dealer Since 2022
Location: Englewood, CO
Contact Trevor Jenson
Phone Number: 844...> Show Phone Number 844-605-1425
Let the seller know you found their listing on Surplus Record!
$177,000 USD
Description
- Material support slats 4" x 1/8" galvanized steel
- Cutting envelope: 2.54 m x 1.39 m (8’ 4” x 4’ 7”)
- Maximum supported material load 400 lbs/sq ft (1,953 kg/sq meter)
- Electrical requirements 3-phase, 380-480 VAC ±10%, 50-60 Hz
- Noise level below 80 dBA at one meter for submerged cutting
- Speed 180 in/min (4.57 m/min)
- Linear axis accuracy* ±0.001” (±0.025 mm)
- Linear axis repeatability* ±0.001” (±0.025 mm)
- Ballbar circularity* ±0.0025” (±0.064 mm)
- Nozzle type: OMAX MAXJET 5I
- Z-axis: automated height control (motorized & programmable)
- Cutting method: submerged cutting with automatic water level adjustment
- Standard output pressure: 60,000 PSI
- Standard bulk abrasive delivery system: 600 lb capacity hopper that feeds garnet into a “zero-downtime” hopper on the Z-axis
- Cutting envelope: 2.54 m x 1.39 m (8’ 4” x 4’ 7”)
- Maximum supported material load 400 lbs/sq ft (1,953 kg/sq meter)
- Electrical requirements 3-phase, 380-480 VAC ±10%, 50-60 Hz
- Noise level below 80 dBA at one meter for submerged cutting
- Speed 180 in/min (4.57 m/min)
- Linear axis accuracy* ±0.001” (±0.025 mm)
- Linear axis repeatability* ±0.001” (±0.025 mm)
- Ballbar circularity* ±0.0025” (±0.064 mm)
- Nozzle type: OMAX MAXJET 5I
- Z-axis: automated height control (motorized & programmable)
- Cutting method: submerged cutting with automatic water level adjustment
- Standard output pressure: 60,000 PSI
- Standard bulk abrasive delivery system: 600 lb capacity hopper that feeds garnet into a “zero-downtime” hopper on the Z-axis
Inquire Further with Aucto!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Omax #55100, waterjet, 4.5' x 8.3' table, 30 HP, 60,000 PSI., Omax PC based control, 2005
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 55100
Year: 2005
Used Omax 55100 (2005) Waterjet for Sale. This machine has a 4.5′ wide by 8.3′ long table with easy access to three sides of the tank, and runs on the Omax PC based control. Cutting is supplied by an Omax 3060v Enduromax 30 HP pump rated to a maximum cutting pressure of 60,000 PSI. the Omax abrasive ...more
Omax #55100, CNC waterjet, 60000 psi, 100" X, 55" Y, 8" Z, 65" x 126" table, 2018
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: 55100
Year: 2018
2018 OMAX 55100, Pump PSI. 60,000 PSI, X-Axis. 100", Y-Axis. 55", Z-Axis. 8", Accuracy. 0.0010", Repeatability. 0.0010", Table Size-W. 65", Table Size-L. 126", Cut Speed. 180 ipm, Dimensions. 12'11" x 7'10" x 9'10" H, Weight. 8,000 Lbs w/ Empty Tank, OMAX 3050V Pump, Motorized Z-Axis, 600 Lbs Abrasive ...more
Omax #55100, Water Jet Machining Center, 126" x 65" table, 180 inches/minute, 480 Volts, 3PH, 2012
Category: Waterjet Cutters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Omax
Model: 55100
Year: 2012
SKU: 151792, Model: 55100, Year: 2012, Condition: Used, S/N: B512174, Table Size: 126"x65", Hours: 5512, Electrical :, Voltage: 480 volts, Phase: 3-phase, Dimensions: 120.00 (H) x 105.00 (W) x 181.00 (L) inches, Additional :, Material support slats: 4" x 1/8" // 102 mm x 3.2 mm galvanized steel ...more
Omax #55100, CNC waterjet, 4.5' x 8.3', 30 HP, 60000 psi, garnett hopper, chiller, height sensor, 2021
Category: Waterjet Cutters
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Omax
Model: 55100
Year: 2021
Stock #: 112250031, Location: Decatur, GA, Brand: Omax, Model: 55100, Serial #: B512656, Year: 2021, Approx. Shipping Weight: 8,000 Lbs., Approx. Shipping Dimensions: 20' L x 8' W x 8' H, Skidding Fee: Skidding Unavailable, Table Width: 4.5', Table Length: 8.3', Pump: 30 HP, Max Cutting Pressure: ...more
Omax #55100, Waterjet Cutting System, 8' 4" x 4' 7" table, 2021
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Omax
Model: 55100
Year: 2021
8’ 4” X 4’ 7” Waterjet Cutting System with Omax CNC Control, Garnet Recovery System, Water Filtration System, Model AIR 2000-Omax Chiller and Roura Hopper Skid of Class 80 Garnet., X & Y Cutting Travels: 100” X 55”, Z - Axis Travel: 8”, Tank Size: 10’ 6” X ...more
