For Sale by Lenmark Industries
Surplus Record Dealer Since 2024
Location: Langley, BC Canada
Contact Lenmark Sales
Phone Number: 778...> Show Phone Number 778-653-5801
Let the seller know you found their listing on Surplus Record!
$4,795 USD
Description
SKU: 151792
Model: 55100
Year: 2012
Condition: Used
S/N: B512174
General Specifications:
Table Size: 126"x65"
Hours: 5512
Electrical Specifications:
Voltage: 480 volts
Phase: 3-phase
Dimensions: 120.00 (H) x 105.00 (W) x 181.00 (L) inches
Additional Description:
Material support slats: 4" x 1/8" // 102 mm x 3.2 mm galvanized steel
Maximum supported material load: 400 lbs/sq ft // 1,953 kg/sq meter
Electrical requirements: 3-Phase, 380-480 VAC +-10%, 50-60 Hz
Noise level: Below 80 dBA at one meter for submerged cutting
Speed: 180 in/min // 4.57 m/min
Linear axis accuracy: +-0.001" // +-0.025 mm
Linear axis repeatability: +-0.001" // +-0.025 mm
Ballbar circularity: +-0.0025" // +-0.064 mm
Model: 55100
Year: 2012
Condition: Used
S/N: B512174
General Specifications:
Table Size: 126"x65"
Hours: 5512
Electrical Specifications:
Voltage: 480 volts
Phase: 3-phase
Dimensions: 120.00 (H) x 105.00 (W) x 181.00 (L) inches
Additional Description:
Material support slats: 4" x 1/8" // 102 mm x 3.2 mm galvanized steel
Maximum supported material load: 400 lbs/sq ft // 1,953 kg/sq meter
Electrical requirements: 3-Phase, 380-480 VAC +-10%, 50-60 Hz
Noise level: Below 80 dBA at one meter for submerged cutting
Speed: 180 in/min // 4.57 m/min
Linear axis accuracy: +-0.001" // +-0.025 mm
Linear axis repeatability: +-0.001" // +-0.025 mm
Ballbar circularity: +-0.0025" // +-0.064 mm
Inquire Further with Lenmark Industries!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Omax #55100, CNC Waterjet, 100" X, 55" Y, 4.5' x 8.3' table, 30 HP pump, 60,000 psi, height sensor, chiller, 460 Volt, 3PH, 2021
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omax
Model: 55100
Year: 2021
Used Omax 55100 (2021) Waterjet for Sale. This abrasive waterjet has a 4.5′ wide by 8.3′ long table with 100″ of X-axis travel and 55″ of Y-axis travel. It is driven by a 30 HP pump with a maximum cutting pressure of 60,000 PSI, and runs on 460V/3ph power. a garnett hopper, chiller, chiller ...more
Featured
Omax #55100, CNC Waterjet, 126" X, 60" Y, 32" Z, Omax Control Center, Pump Unit, 110 Vac
Category: Waterjet Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Omax
Model: 55100
15 A, 110 VAC, OMAX CONTROL CENTER, PUMP UNIT (1425#) 71X38X38, (9660#) 192X100X84, *CONTAINS 2 PIECES.
Omax #55100, CNC waterjet, 60000 psi, 100" X, 55" Y, 8" Z, 65" x 126" table, 2018
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Omax
Model: 55100
Year: 2018
2018 OMAX 55100, Pump PSI. 60,000 PSI, X-Axis. 100", Y-Axis. 55", Z-Axis. 8", Accuracy. 0.0010", Repeatability. 0.0010", Table Size-W. 65", Table Size-L. 126", Cut Speed. 180 ipm, Dimensions. 12'11" x 7'10" x 9'10" H, Weight. 8,000 Lbs w/ Empty Tank, OMAX 3050V Pump, Motorized Z-Axis, 600 Lbs Abrasive ...more
Omax #55100, CNC waterjet, 4.5' x 8.3', 30 HP, 60000 psi, garnett hopper, chiller, height sensor, 2021
Category: Waterjet Cutters
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Omax
Model: 55100
Year: 2021
Stock #: 112250031, Location: Decatur, GA, Brand: Omax, Model: 55100, Serial #: B512656, Year: 2021, Approx. Shipping Weight: 8,000 Lbs., Approx. Shipping Dimensions: 20' L x 8' W x 8' H, Skidding Fee: Skidding Unavailable, Table Width: 4.5', Table Length: 8.3', Pump: 30 HP, Max Cutting Pressure: ...more
Omax #55100, Waterjet Cutting System, 8' 4" x 4' 7" table, 2021
Category: Waterjet Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Omax
Model: 55100
Year: 2021
8’ 4” X 4’ 7” Waterjet Cutting System with Omax CNC Control, Garnet Recovery System, Water Filtration System, Model AIR 2000-Omax Chiller and Roura Hopper Skid of Class 80 Garnet., X & Y Cutting Travels: 100” X 55”, Z - Axis Travel: 8”, Tank Size: 10’ 6” X ...more


























