1 / 7
Click to zoom in
1 / 7
For Sale by KD Machinery
Surplus Record Dealer Since 2026
Location: Scottsdale, AZ
Contact Sales Dept.
Phone Number: 480...> Show Phone Number 480-565-7310
Let the seller know you found their listing on Surplus Record!
Description
Used Bay Plastics Machinery BP50 (2016) Extruder for Sale. This BP50 pelletizer has a cutting chamber measuring 50 mm wide by 120 mm deep and a 50 mm wide bed knife. Power comes from a 2 HP AC motor driven through an AC VFD with HTD belt, giving a speed range of 80-1000 RPM. The cutter carries 20 teeth with 4 edges and is set for 1/8″ pellet length. Feed rolls are 1-1/4″ diameter lower and 2-1/4″ diameter upper. Equipped with serpentine belt, eccentric adjustment and fixed adjustment. The machine can be seen under power for an inspection. See more listings in our used plastic extruders category,
| Cutting Chamber (Cutter) | 50 W x 120 D (mm) |
|---|---|
| Horsepower | 2 HP AC Motor |
| Bed Knife | 50 mm Wide |
| Speed Range | 80-1000 RPM |
| Number of Teeth | 20 |
| Number of Edges | 4 |
| Pellet Length | 1/8" |
| Lower Feed Roll | 1 - 1/4" Diameter |
| Upper Feed Roll | 2 - 1/4" Diameter |
| Drive | AC VFD with HTD Belt |
Get Your Price from KD Machinery!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Gala #5MUP, underwater pelletizing system, 2 HP cutter, 4 blade hub, TWS-40 water system, 8.2 BF dryer, 3 spare dies
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Gala
Model: 5MUP
Gala Model 5 MUP Underwater Pelletizing System, Gala model 5MUP underwater pelletizing system. Includes 2 HP cutter with four (4) blade hub, three (3) spare dies, 40 GPM TWS-40 water system with heater, pump, heater exchanger, 5 HP model 8.2 BF dryer, and non-OEM custom control panel.
4" Scheer Bay #SGS-100ST, strand pelletizer, 2 HP DC, 20 knife helical rotor, 74" infeed H, 54" discharge H, 180 V., KB variable speed DC drive
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cf Scheer
Model: SGS 100ST
Used 4" Scheer Bay SGS 100ST Strand Pelletizer, 2 HP DC Motor Infeed Height: 74" 20 Knife Helical-Style Rotor Pneumatic Feed Roll Assembly Discharge Height: 54" 2 HP Leeson DC Motor, KS182BC Frame 1750 RPM 180 Volts, 9.5A TEFC, H3 Insulation Class KB Electrics Solid-State Variable Speed DC Drive, Powered Through 1 kVA ...more
14" x 6" Van Dorn #G-200, Plastic Grinder/Granulator, 6.5" x 6.5" chamber, 3 rotating & 2 stationary blades, 2 HP, 1140 RPM, 230/460 V., frame w/ casters
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Van Dorn
Model: G-200
used- van dorn model g-200 plastic grinder / granulator. mild steel construction. chamber measures 6-1/2" x 6-1/2" with 14" x 6" feed throat. includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. driven by 2 hp, 230/460 volts, 3-phase, 60 hz, 1140 rpm motor. ...more
10" x 14" Nissui granulator, 2 HP, 1730 RPM, S cutter blades
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Nissui
Machine Type: Low Speed, Cutting Chamber: 10" x 14", Blades: S Cutter, Horsepower: 2, Rpm: 1730, Amps: 3, Voltage: 460/3/60.
14" x 6" Van Dorn #G-200, Plastic Grinder/Granulator, 6.5" x 6.5" chamber w/14" x 6" feed throat, (3) rotating & (2) stationary blades, 2 HP, 1140 RPM, 230/460 V
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Van Dorn
Model: G-200
Van Dorn Model G-200 plastic grinder / granulator, mild steel construction. Chamber measures 6-1/2" X 6-1/2" with 14" x 6" feed throat. Includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. Driven by 2 HP, 230/460 volts, 3-phase, 60 Hz, 1140 RPM motor. ...more
