8.3" Haas #HRT-210SP, 4th Axis CNC Rotary Table, 170 lb. max., 210 ft.lb. torque, 6 T-slots, 0.001° resolution, 100°F operating temp., 115 V., 2022

Haas HRT210SP Rotary Table

HRT210SP

The HRT SP Series gives you the same features and benefits as the standard HRT Series, but the motor is wrapped behind the table to provide a substantially shorter overall length, and help you fit a lot of table into a small work envelope. Note: SP models do not have a through hole. The bore depth is the thickness of the platter.

Note: Requires a Haas mill with 4th-axis drive and NGC software version 100.21.000.1130 or later for full 4th-axis operation. Stand-alone operation requires a Haas rotary control box shipped after November 10, 2021, with software version 26.38 or newer.

Specifications (subject to buyer verification):

Platter

Platter Diameter: 8.30 in

Max Weight on Platter (w/support) : 170 lb

Max Weight on Platter (unsupported) : 85 lb

Number of Std T-Slots: 6 @ 60°

Spindle

Max Speed: 100 °/sec

Torque (Continuous) : 210 ft-lbf

Runout Max: 0.0005 in

Center Height: 6.000 in

Backlash: 30 arc-sec

Brake Torque @ 100 psi/6.9 bar: 200 ft-lbf

Gear Ratio: 90:1

Timing: 2:1

Indexing

Accuracy (±): ± 15.0 arc-sec

Repeatability: 10 arc-sec

Resolution: 0.001 °

Worm Gear Dia: 6.3 in

Max Rotation/Step (with rotary control) : 999.999 °

General

Power Requirement: 115 VAC ±10% @ 15 A

Operating Temp (max ambient) : 100 °F

Air Requirements

Air Pressure Max: 150 psi