For Sale by Smith Machinery Co
Surplus Record Dealer Since 2001
Location: Ames, IA
Contact Jim Smith
Phone Number: 515...> Show Phone Number 515-233-6330
Let the seller know you found their listing on Surplus Record!
Description
Specifications
Equipped With
Equipped With
Equipped With
Equipped With
SPECIFICATIONS:MAX CAPACITIES: ROUND TUBE ------- 90?? = 3-3/8 in & 45?? = 2-
3/4 in
ROUND SOLID ------ 90?? = 1-1/2 in & 45?? = 1 in
ELECTRICS ------------------------ 230 OR 460 VOLT 3 PHASE
MITER CAPABILITIES --------------- 135?? (90?? Left & 45??
Right
With Miter Lock Stops at 45?? Left, 90??, & 45?? Right)FEATURES:- MANUAL DOUBLE SELF-CENTERING VISE
- OPERATOR CONTROLLED TRIGGER SWITCH
- CAPABLE OF SLOTTING
- TWO CUTTING SPEEDS (LT 30/60 rpm Or HT 60/120 rpm)
- HARDENED AND GROUND WORM & WHEEL GEAR BOX
- 7 GALLON COOLANT TANK WITH PUMP
- 30 in MASPECIFICATIONS SUBJECT TO VERIFICATIONOPTIONAL FEATURES:SQUARE TUBE/DIAGONAL VISE JAWS ------------------ $ 750.00
SPECIAL FORM JAWS (SAMPLES REQUIRED) ------------ $P.O.R.
UNIVERSAL CLAMPING FIXTURE (WHEN ORDERED
SEPARATELY) ------------------------------------- $1,145.00
MAG BRUSH --------------------------------------- $ 89.00
10 ft MATERIAL SUPPLY TRACK ----------------------- $ 605.00
20 ft MATERIAL SUPPLY TRACK ----------------------- $1,185.00
60 in MATERIAL STOP TRACK W/ RIGHT HAND QUICK LOC - $1,245.00
60 in MATERIAL STOP TRACK W/ LEFT HAND QUICK LOC -- $1,245.00
120 in MATERIAL STOP TRACK W/RIGHT HAND QUICK LOC - $1,495.00
120 in MATERIAL STOP TRACK W/ LEFT HAND QUICK LOC - $1,495.00
96 in SG PROGRAMMABLE STOP SYSTEM ----------------- $5,245.00
144 in SG PROGRAMMABLE STOP SYSTEM ---------------- $6,095.00
ELECTRIC POWER DOWN FEED RETROFIT KIT ----------- $4,995.00
BLADE GUIDE LASER LIGHT (FACTORY INSTALL) ------- $1,095.00
BLADE GUIDE LASER LIGHT (CUSTOMER INSTALL) ------ $ 995.00
DUAL PALM BUTTONS (CPO SERIES) ------------------ $2,495.00
275 ECONOMY FABRICATION PACKAGE ----------------- $1,975.00DELIVERY: SUBJECT TO STOCK
3/4 in
ROUND SOLID ------ 90?? = 1-1/2 in & 45?? = 1 in
ELECTRICS ------------------------ 230 OR 460 VOLT 3 PHASE
MITER CAPABILITIES --------------- 135?? (90?? Left & 45??
Right
With Miter Lock Stops at 45?? Left, 90??, & 45?? Right)FEATURES:- MANUAL DOUBLE SELF-CENTERING VISE
- OPERATOR CONTROLLED TRIGGER SWITCH
- CAPABLE OF SLOTTING
- TWO CUTTING SPEEDS (LT 30/60 rpm Or HT 60/120 rpm)
- HARDENED AND GROUND WORM & WHEEL GEAR BOX
- 7 GALLON COOLANT TANK WITH PUMP
- 30 in MASPECIFICATIONS SUBJECT TO VERIFICATIONOPTIONAL FEATURES:SQUARE TUBE/DIAGONAL VISE JAWS ------------------ $ 750.00
SPECIAL FORM JAWS (SAMPLES REQUIRED) ------------ $P.O.R.
UNIVERSAL CLAMPING FIXTURE (WHEN ORDERED
SEPARATELY) ------------------------------------- $1,145.00
MAG BRUSH --------------------------------------- $ 89.00
10 ft MATERIAL SUPPLY TRACK ----------------------- $ 605.00
20 ft MATERIAL SUPPLY TRACK ----------------------- $1,185.00
60 in MATERIAL STOP TRACK W/ RIGHT HAND QUICK LOC - $1,245.00
60 in MATERIAL STOP TRACK W/ LEFT HAND QUICK LOC -- $1,245.00
120 in MATERIAL STOP TRACK W/RIGHT HAND QUICK LOC - $1,495.00
120 in MATERIAL STOP TRACK W/ LEFT HAND QUICK LOC - $1,495.00
96 in SG PROGRAMMABLE STOP SYSTEM ----------------- $5,245.00
144 in SG PROGRAMMABLE STOP SYSTEM ---------------- $6,095.00
ELECTRIC POWER DOWN FEED RETROFIT KIT ----------- $4,995.00
BLADE GUIDE LASER LIGHT (FACTORY INSTALL) ------- $1,095.00
BLADE GUIDE LASER LIGHT (CUSTOMER INSTALL) ------ $ 995.00
DUAL PALM BUTTONS (CPO SERIES) ------------------ $2,495.00
275 ECONOMY FABRICATION PACKAGE ----------------- $1,975.00DELIVERY: SUBJECT TO STOCK
Get Your Price from Smith Machinery Co!
Buyers Who Viewed This Listing Also Viewed:
3-3/8" Startrite #CP275SO, Manual Cold Saw, 30/60 RPM, 230 V., 10.8" blade, 1.3" arbor bore
Category: Carbide, Friction and Cold Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Startrite
Model: CP275SO
STARTRITE CP275SO Manual Cold Saw #7856 #1, Cutting Speeds: LT (Low Turn) - designed for solid mild steel, solid stainless steel & thick wall pipe: 30/60 rpm, Maximum Cutting Capacities (with 275 mm blade):, Tubing:, Round 90: 3-3/8", Square 90: 3" x 3", Rectangle 90: 3" x 2-3/8", Round 45: 2", Square 45: 2" x 2" ...more
3-3/8" Scotchman #CPO 275 PK, Circular Cold Saw, 2 speed, double self-centering vise,
Category: Carbide, Friction and Cold Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Scotchman
Model: CPO
MAX CAPACITIES: ROUND TUBE ------ 90?? = 3-3/8 in & 45?? = 2-3/4 in, ROUND SOLID ----- 90?? = 1-1/2 in & 45?? = 1 in, ELECTRICS ----------------------- 230 OR 460 VOLT 3 PHASE, MITER CAPABILITIES -------------- 135?? (90?? L & 45?? R)S:- POWER DOUBLE SELF-CENTERING VISE, - OPERATOR CONTROLLED TRIGGER ...more
JUST ADDED!
3.5" Eisele #VMS-300-PV, circular cold saw, 11" blade diameter, 1996
Category: Carbide, Friction and Cold Saws
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Eisele
Model: VMS-300-PV
Year: 1996
Circular Cold Saw, Manufacturer: Eisele Maschinen-Sagesysteme (Germany), Type: VMS 300 PV, Model No.: 41104P0008, DOM: 1996, Electrics: 230 Volt, 3 Phase, 60 Cycle, 2.6 Amps, s and :,.Capacity:,.Round: 3-1/2",.Square: 3",.Rectangular @ 90°: 4-3/4" x 3",.Rectangular @ 45°: 7-1/2'" x ...more
JUST ADDED!
3.5" Kasto #WA-90R/S, Automatic Cold Saw, 125-750 SFPM, 10 HP, Chip Conv., mist coolant, with blades, 2018
Category: Carbide, Friction and Cold Saws
Seller: Kaste Industrial Machine Sale
Location: Enfield, CT
Mfr: Kasto
Model: WA-90R/S
Year: 2018
Wire Brush Deburring Not included, Material: stainless steel tubing, Size: 1.250" sq., 1.500" sq. + 1" x 2" rectangle, Wall thickness: 16 + 18 GA, Starting length: 20', Cut length: up to 79", CUTTING CAPACITIES WITH A SAW BLADE DI!A. OF:10" 12", Rounds, Standard and heavy walled tubes 2 3/4" 3 1/2", Thin walled ...more
3.15" Hydmech #CSNC-80, Carbide Circular Cold Saw, 11" x 0.07" kerf Blade Size, 10'-20' L Bar Stock, 0.24"-39" Cut-Off length, 50-200 MPM, 15 HP
Category: Carbide, Friction and Cold Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hydmech
Model: CSNC-80
Spec, Cutting Capacity Round 90°: 0.4″-3.15″, Cutting Capacity Square 90°: 0.4″-2.36″, Blade Drive: 15 HP VFD, Blade Speed: 50-200 MPM, Blade Size: Carbide/ Cermet tipped: 285 mm x 1.7 mm kerf, Bar Stock Length: 10′-20′, Trim Cut: Zero or programmable from 0.4′ or ...more
